The function `repo_set_gitdir()` is called in two situations:
- To initialize the repository with its discovered location. As part
of this we also set up the new object database.
- To update the repository's discovered location in case the process
changes its working directory so that we update relative paths. This
means we also have to update any relative paths that are potentially
used in the object database.
In the context of the object database we ideally wouldn't ever have to
worry about the second case: if all paths used by our object database
sources were absolute, then we wouldn't have to update them. But
unfortunately, the paths aren't only used to locate files owned by the
given source, but we also use them for reporting purposes. One such
example is `repo_get_object_directory()`, where we cannot just change
semantics to always return absolute paths, as that is likely to break
tooling out there.
One solution to this would be to have both a "display path" and an
"internal path". This would allow us to use internal paths for all
internal matters, but continue to use the potentially-relative display
paths so that we don't break compatibility. But converting the codebase
to honor this split is quite a messy endeavour, and it wouldn't even
help us with the goal to get rid of the need to update the display path
on chdir(3p).
Another solution would be to rework "setup.c" so that we never have to
update paths in the first place. In that case, we'd only initialize the
repository once we have figured out final locations for all directories.
This would be a significant simplification of that subsystem indeed, but
the current logic is so messy that it would take significant investments
to get there.
Meanwhile though, while object sources may still use relative paths, the
best thing we can do is to handle the reparenting of the object source
paths in the object database itself. This can be done by registering one
callback for each object database so that we get notified whenever the
current working directory changes, and we then perform the reparenting
ourselves.
Ideally, this wouldn't even happen on the object database level, but
instead handled by each object database source. But we don't yet have
proper pluggable object database sources, so this will need to be
handled at a later point in time.
The logic itself is rather simple:
- We register the callback when creating the object database.
- We unregister the callback when releasing it again.
- We split up `set_git_dir_1()` so that it becomes possible to skip
recreating the object database. This is required because the
function is called both when the current working directory changes,
but also when we set up the repository. Calling this function
without skipping creation of the ODB will result in a bug in case
it's already created.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic to set up a new object database is currently distributed
across two functions in "repository.c":
- In `initialize_repository()` we initialize an empty object database.
This object database is not fully initialized and doesn't have any
sources attached to it.
- The primary object database source is then created in
`repo_set_gitdir()`.
Ideally though, the logic should be entirely self-contained so that we
can iterate more readily on how exactly the sources themselves get set
up.
Refactor `odb_new()` to handle both allocation and setup of the object
database. This ensures that the object database is always initialized
and ready for use, and it allows us to change how the sources get set up
eventually.
Note that `repo_set_gitdir()` still reaches into the sources when the
function gets called with an already-initialized object database. This
will be fixed in the next commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our object database sources have a field `disable_ref_updates`. This
field can obviously be set to disable reference updates, but it is
somewhat curious that this logic is hosted by the object database.
The reason for this is that it was primarily added to keep us from
accidentally updating references while an ODB transaction is ongoing.
Any objects part of the transaction have not yet been committed to disk,
so new references that point to them might get corrupted in case we
never end up committing the transaction. As such, whenever we create a
new transaction we set up a new temporary ODB source and mark it as
disabling reference updates.
This has one (and only one?) upside: once we have committed the
transaction, the temporary source will be dropped and thus we clean up
the disabled reference updates automatically. But other than that, it's
somewhat misdesigned:
- We can have multiple ODB sources, but only the currently active
source inhibits reference updates.
- We're mixing concerns of the refdb with the ODB.
Arguably, the decision of whether we can update references or not should
be handled by the refdb. But that wouldn't be a great fit either, as
there can be one refdb per worktree. So we'd again have the same problem
that a "global" intent becomes localized to a specific instance.
Instead, move the setting into the repository. While at it, convert it
into a boolean.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function `odb_clear()` releases all resources allocated to an object
database and ensures that all fields become zero'd out. Despite its
naming though it doesn't really clear the object database so that it
becomes ready for reuse afterwards again -- the caller would first have
to reinitialize it, and that contradicts the terminology of "clearing"
as we have defined it in our coding guidelines.
There isn't really only a reason to have "clearing" semantics, either.
There's only a single caller of `odb_clear()`, and that caller also ends
up freeing the object database structure itself.
Refactor the function to have "freeing" semantics instead, so that the
structure itself is also freed, which allows us to drop some useless
boilerplate to zero out the structure's members.
This refactoring reveals that we're trying to close the commit graph
multiple times: once directly via `free_commit_graph()`, and once via
`odb_close()`. Drop the former call.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic to close an object database is currently contained in the
packfile subsystem. That choice is somewhat relatable, as most of the
logic really is to close resources associated with the packfile store
itself. But we also end up handling object sources and commit graphs,
which certainly is not related to packfiles.
Move the function into the object database subsystem and rename it to
`odb_close()`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have two different ways to write an object into the database:
- We either provide the full buffer and write the object all at once.
- Or we provide an input stream that has a `read()` function so that
we can chunk the object.
The latter is especially used for large objects, where it may be too
expensive to hold the complete object in memory all at once.
While we already have `odb_write_object()` at the ODB-layer, we don't
have an equivalent for streaming an object. Introduce a new function
`odb_write_object_stream()` to address this gap so that callers don't
have to be aware of the inner workings of how to stream an object to
disk with a specific object source.
Rename `stream_loose_object()` to `odb_source_loose_write_stream()` to
clarify its scope. This matches our modern best practices around how to
name functions.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing an object that already exists in our object database we
skip the write and instead only update mtimes of the object, either in
its packed or loose object format. This logic is wholly contained in
"object-file.c", but that file is really only concerned with loose
objects. So it does not really make sense that it also contains the
logic to freshen a packed object.
Introduce a new `odb_freshen_object()` function that sits on the object
database level and two functions `packfile_store_freshen_object()` and
`odb_source_loose_freshen_object()`. Like this, the format-specific
functions can be part of their respective subsystems, while the backend
agnostic function to freshen an object sits at the object database
layer.
Note that this change also moves the logic that iterates through object
sources from the object source layer into the object database layer.
This change is intentional: object sources should ideally only have to
worry about themselves, and coordination of different sources should be
handled on the object database level.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The loose object map is used to map from the repository's canonical
object hash to the compatibility hash. As the name indicates, this map
is only used for loose objects, and as such it is tied to a specific
loose object source.
Same as with preceding commits, move this map into the loose object
source accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our loose objects use a cache that (optionally) stores all objects for
each of the opened sharding directories. This cache is located in the
`struct odb_source`, but now that we have `struct odb_source_loose` it
makes sense to move it into the latter structure so that all state that
relates to loose objects is entirely self-contained.
Do so. While at it, rename corresponding functions to have a prefix that
relates to `struct odb_source_loose`.
Note that despite this prefix, the functions still accept a `struct
odb_source` as input. This is done intentionally: once we introduce
pluggable object databases, we will continue to accept this struct but
then do a cast inside these functions to `struct odb_source_loose`. This
design is similar to how we do it for our ref backends.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, all state that relates to loose objects is held directly by
the `struct odb_source`. Introduce a new `struct odb_source_loose` to
hold the state instead so that it is entirely self-contained.
This structure will eventually morph into the backend for accessing
loose objects. As such, this is part of the refactorings to introduce
pluggable object databases.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `fetch_if_missing` global variable is declared in "object-file.h"
but defined in "odb.c". The variable relates to the whole object
database instead of only loose objects, so move the declaration into
"odb.h" accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have three different locations where we create a new ODB source.
Deduplicate the logic via a new `odb_source_new()` function.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up around the in-core list of all the pack files and
object database(s).
* ps/packfile-store:
packfile: refactor `get_packed_git_mru()` to work on packfile store
packfile: refactor `get_all_packs()` to work on packfile store
packfile: refactor `get_packed_git()` to work on packfile store
packfile: move `get_multi_pack_index()` into "midx.c"
packfile: introduce function to load and add packfiles
packfile: refactor `install_packed_git()` to work on packfile store
packfile: split up responsibilities of `reprepare_packed_git()`
packfile: refactor `prepare_packed_git()` to work on packfile store
packfile: reorder functions to avoid function declaration
odb: move kept cache into `struct packfile_store`
odb: move MRU list of packfiles into `struct packfile_store`
odb: move packfile map into `struct packfile_store`
odb: move initialization bit into `struct packfile_store`
odb: move list of packfiles into `struct packfile_store`
packfile: introduce a new `struct packfile_store`
The work to build on the bulk-checkin infrastructure to create many
objects at once in a transaction and to abstract it into the
generic object layer continues.
* jt/odb-transaction:
odb: add transaction interface
object-file: update naming from bulk-checkin
object-file: relocate ODB transaction code
bulk-checkin: drop flush_odb_transaction()
builtin/update-index: end ODB transaction when --verbose is specified
bulk-checkin: remove ODB transaction nesting
In `reprepare_packed_git()` we perform a couple of operations:
- We reload alternate object directories.
- We clear the loose object cache.
- We reprepare packfiles.
While the logic is hosted in "packfile.c", it clearly reaches into other
subsystems that aren't related to packfiles.
Split up the responsibility and introduce `odb_reprepare()` which now
becomes responsible for repreparing the whole object database. The
existing `reprepare_packed_git()` function is refactored accordingly and
only cares about reloading the packfile store now.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The object database tracks a cache of "kept" packfiles, which is used by
git-pack-objects(1) to handle cruft objects. With the introduction of
the `struct packfile_store` we have a better place to host this cache
though.
Move the cache accordingly.
This moves the last bit of packfile-related state from the object
database into the packfile store. Adapt the comment for the `packfiles`
pointer in `struct object_database` to reflect this.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The object database tracks the list of packfiles in most-recently-used
order, which is mostly used to favor reading from packfiles that contain
most of the objects that we're currently accessing. With the
introduction of the `struct packfile_store` we have a better place to
host this list though.
Move the list accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The object database tracks a map of packfiles by their respective paths,
which is used to figure out whether a given packfile has already been
loaded. With the introduction of the `struct packfile_store` we have a
better place to host this list though.
Move the map accordingly.
`pack_map_entry_cmp()` isn't used anywhere but in "packfile.c" anymore
after this change, so we convert it to a static function, as well. Note
that we also drop the `inline` hint: the function is used as a callback
function exclusively, and callbacks cannot be inlined.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The object database knows to skip re-initializing the list of packfiles
in case it's already been initialized. Whether or not that is the case
is tracked via a separate `initialized` bit that is stored in the object
database. With the introduction of the `struct packfile_store` we have a
better place to host this bit though.
Move it accordingly. While at it, convert the field into a boolean now
that we're allowed to use them in our code base.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The object database tracks the list of packfiles it currently knows
about. With the introduction of the `struct packfile_store` we have a
better place to host this list though.
Move the list accordingly. Extract the logic from `odb_clear()` that
knows to close all such packfiles and move it into the new subsystem, as
well.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Information about an object database's packfiles is currently
distributed across two different structures:
- `struct packed_git` contains the `next` pointer as well as the
`mru_head`, both of which serve to store the list of packfiles.
- `struct object_database` contains several fields that relate to the
packfiles.
So we don't really have a central data structure that tracks our
packfiles, and consequently responsibilities aren't always clear cut.
A consequence for the upcoming pluggable object databases is that this
makes it very hard to move management of packfiles from the object
database level down into the object database source.
Introduce a new `struct packfile_store` which is about to become the
single source of truth for managing packfiles. Right now this data
structure doesn't yet contain anything, but in subsequent patches we
will move all data structures that relate to packfiles and that are
currently contained in `struct object_database` into this new home.
Note that this is only a first step: most importantly, we won't (yet)
move the `struct packed_git::next` pointer around. This will happen in a
subsequent patch series though so that `struct packed_git` will really
only host information about the specific packfile it represents.
Further note that the new structure still sits at the wrong level at the
end of this patch series: as mentioned, it should eventually sit at the
level of the object database source, not at the object database level.
But introducing the packfile store now already makes it way easier to
eventually push down the now-selfcontained data structure by one level.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Transactions are managed via the {begin,end}_odb_transaction() function
in the object-file subsystem and its implementation is specific to the
files object source. Introduce odb_transaction_{begin,commit}() in the
odb subsystem to provide an eventual object source agnostic means to
manage transactions.
Update call sites to instead manage transactions through the odb
subsystem. Also rename {begin,end}_odb_transaction() functions to
object_file_transaction_{begin,commit}() to clarify the object source it
supports.
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The bulk-checkin code used to depend on a file-scope static
singleton variable, which has been updated to pass an instance
throughout the callchain.
* jt/de-global-bulk-checkin:
bulk-checkin: use repository variable from transaction
bulk-checkin: require transaction for index_blob_bulk_checkin()
bulk-checkin: remove global transaction state
bulk-checkin: introduce object database transaction structure
Further code clean-up for multi-pack-index code paths.
* ps/object-store-midx-dedup-info:
midx: compute paths via their source
midx: stop duplicating info redundant with its owning source
midx: write multi-pack indices via their source
midx: load multi-pack indices via their source
midx: drop redundant `struct repository` parameter
odb: simplify calling `link_alt_odb_entry()`
odb: return newly created in-memory sources
odb: consistently use "dir" to refer to alternate's directory
odb: allow `odb_find_source()` to fail
odb: store locality in object database sources
In the Git 2.51 release cycle we've refactored the object database layer
to access objects via `struct object_database` directly. To make the
transition a bit easier we have retained some of the old-style functions
in case those were widely used.
Now that Git 2.51 has been released it's time to clean up though and
drop these old wrappers. Do so and adapt the small number of newly added
users to use the new functions instead.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ps/object-store-midx-dedup-info:
midx: compute paths via their source
midx: stop duplicating info redundant with its owning source
midx: write multi-pack indices via their source
midx: load multi-pack indices via their source
midx: drop redundant `struct repository` parameter
odb: simplify calling `link_alt_odb_entry()`
odb: return newly created in-memory sources
odb: consistently use "dir" to refer to alternate's directory
odb: allow `odb_find_source()` to fail
odb: store locality in object database sources
Object database transactions in the bulk-checkin subsystem rely on
global state to track transaction status. Stop relying on global state
and instead store the transaction in the `struct object_database`.
Functions that operate on transactions are updated to now wire
transaction state.
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Callers have no trivial way to obtain the newly created object database
source when adding it to the in-memory list of alternates. While not yet
needed anywhere, a subsequent commit will want to obtain that pointer.
Refactor the function to return the source to make it easily accessible.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When trying to locate a source for an unknown object directory we will
die right away. In subsequent patches we will add new callsites though
that want to handle this situation gracefully instead.
Refactor the function to return a `NULL` pointer if the source could not
be found and adapt the callsites to die instead. Introduce a new wrapper
`odb_find_source_or_die()` that continues to die in case the source
could not be found.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Object database sources are classified either as:
- Local, which means that the source is the repository's primary
source. This is typically ".git/objects".
- Non-local, which is everything else. Most importantly this includes
alternates and quarantine directories.
This locality is often computed ad-hoc by checking whether a given
object source is the first one. This works, but it is quite roundabout.
Refactor the code so that we store locality when creating the sources in
the first place. This makes it both more accessible and robust.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reduce implicit assumption and dependence on the_repository in the
object-file subsystem.
* ps/object-file-wo-the-repository:
object-file: get rid of `the_repository` in index-related functions
object-file: get rid of `the_repository` in `force_object_loose()`
object-file: get rid of `the_repository` in `read_loose_object()`
object-file: get rid of `the_repository` in loose object iterators
object-file: remove declaration for `for_each_file_in_obj_subdir()`
object-file: inline `for_each_loose_file_in_objdir_buf()`
object-file: get rid of `the_repository` when writing objects
odb: introduce `odb_write_object()`
loose: write loose objects map via their source
object-file: get rid of `the_repository` in `finalize_object_file()`
object-file: get rid of `the_repository` in `loose_object_info()`
object-file: get rid of `the_repository` when freshening objects
object-file: inline `check_and_freshen()` functions
object-file: get rid of `the_repository` in `has_loose_object()`
object-file: stop using `the_hash_algo`
object-file: fix -Wsign-compare warnings
We do not have a backend-agnostic way to write objects into an object
database. While there is `write_object_file()`, this function is rather
specific to the loose object format.
Introduce `odb_write_object()` to plug this gap. For now, this function
is a simple wrapper around `write_object_file()` and doesn't even use
the passed-in object database yet. This will change in subsequent
commits, where `write_object_file()` is converted so that it works on
top of an `odb_source`. `odb_write_object()` will then become
responsible for deciding which source an object shall be written to.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the preceding commits we have migrated all users of the linked list
of multi-pack indices to instead use those stored in the object database
sources. Remove those now-unused pointers.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Multi-pack indices are tracked via `struct multi_pack_index`. This data
structure is stored as a linked list inside `struct object_database`,
which is the global database that spans across all of the object
sources.
This layout causes two problems:
- Object databases consist of multiple object sources (e.g. one source
per alternate object directory), where each multi-pack index is
specific to one of those sources. Regardless of that though, the
MIDX is not tracked per source, but tracked globally for the whole
object database. This creates a mismatch between the on-disk layout
and how things are organized in the object database subsystems and
makes some parts, like figuring out whether a source has an MIDX,
quite awkward.
- Multi-pack indices are an implementation detail of how efficient
access for packfiles work. As such, they are neither relevant in the
context of loose objects, nor in a potential future where we have
pluggable backends.
Refactor `prepare_multi_pack_index_one()` so that it works on a specific
source, which allows us to easily store a pointer to the multi-pack
index inside of it. For now, this pointer exists next to the existing
linked list we have in the object database. Users will be adjusted in
subsequent patches to instead use the per-source pointers.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename `read_object_with_reference()` to `odb_read_object_peeled()` to
match other functions related to the object database and our modern
coding guidelines. Furthermore though, the old name didn't really
describe very well what this function actually does, which is to walk
down any commit and tag objects until an object of the required type has
been found. This is generally referred to as "peeling", so the new name
should be way more descriptive.
No compatibility wrapper is introduced as the function is not used a lot
throughout our codebase.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename `pretend_object_file()` to `odb_pretend_object()` to match other
functions related to the object database and our modern coding
guidelines.
No compatibility wrapper is introduced as the function is not used a lot
throughout our codebase.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename `has_object()` to `odb_has_object()` to match other functions
related to the object database and our modern coding guidelines.
Introduce a compatibility wrapper so that any in-flight topics will
continue to compile.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename `repo_read_object_file()` to `odb_read_object()` to match other
functions related to the object database and our modern coding
guidelines.
Introduce a compatibility wrapper so that any in-flight topics will
continue to compile.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename `oid_object_info()` to `odb_read_object_info()` as well as their
`_extended()` variant to match other functions related to the object
database and our modern coding guidelines.
Introduce compatibility wrappers so that any in-flight topics will
continue to compile.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--recursive" flag for git-grep(1) allows users to grep for a string
across submodule boundaries. To make this work we add each submodule's
object sources to our own object database so that the objects can be
accessed directly.
The infrastructure for this depends on a global string list of submodule
paths. The caller is expected to call `add_submodule_odb_by_path()` for
each source and the object database will then eventually register all
submodule sources via `do_oid_object_info_extended()` in case it isn't
able to look up a specific object.
This reliance on global state is of course suboptimal with regards to
our libification efforts.
Refactor the logic so that the list of submodule sources is instead
tracked in the object database itself. This allows us to lose the
condition of `r == the_repository` before registering submodule sources
as we only ever add submodule sources to `the_repository` anyway. As
such, behaviour before and after this refactoring should always be the
same.
Rename the functions accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The functions `set_temporary_primary_odb()` and `restore_primary_odb()`
are responsible for managing a temporary primary source for the
database. Both of these functions implicitly rely on `the_repository`.
Refactor them to instead take an explicit object database parameter as
argument and adjust callers. Rename the functions accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a couple of iterator-style functions that execute a callback
for each instance of a given set, all of which currently depend on
`the_repository`. Refactor them to instead take an object database as
parameter so that we can get rid of this dependency.
Rename the functions accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The functions to manage alternates all depend on `the_repository`.
Refactor them to accept an object database as a parameter and adjust all
callers. The functions are renamed accordingly.
Note that right now the situation is still somewhat weird because we end
up using the object store path provided by the object store's repository
anyway. Consequently, we could have instead passed in a pointer to the
repository instead of passing in the pointer to the object store. This
will be addressed in subsequent commits though, where we will start to
use the path owned by the object store itself.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Get rid of our dependency on `the_repository` in `odb_mkstemp()` by
passing in the object database as a parameter and adjusting all callers.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Get rid of our dependency on `the_repository` in `assert_oid_type()` by
passing in the object database as a parameter and adjusting all callers.
Rename the function to `odb_assert_oid_type()`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Get rid of our dependency on `the_repository` in `find_odb()` by passing
in the object database in which we want to search for the source and
adjusting all callers.
Rename the function to `odb_find_source()`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In subsequent commits we'll get rid of our use of `the_repository` in
"odb.c" in favor of explicitly passing in a `struct object_database` or
a `struct odb_source`. In some cases though we'll need access to the
repository, for example to read a config value from it, but we don't
have a way to access the repository owning a specific object database.
Introduce parent pointers for `struct object_database` to its owning
repository as well as for `struct odb_source` to its owning object
database, which will allow us to adapt those use cases.
Note that this change requires us to pass through the object database to
`link_alt_odb_entry()` so that we can set up the parent pointers for any
source there. The callchain is adapted to pass through the object
database accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the preceding commits we have renamed the structures contained in
"object-store.h" to `struct object_database` and `struct odb_backend`.
As such, the code files "object-store.{c,h}" are confusingly named now.
Rename them to "odb.{c,h}" accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
