"git replay" (experimental) learned to perform ref updates itself
in a transaction by default, instead of emitting where each refs
should point at and leaving the actual update to another command.
* sa/replay-atomic-ref-updates:
replay: add replay.refAction config option
replay: make atomic ref updates the default behavior
replay: use die_for_incompatible_opt2() for option validation
"git maintenance" command learned "is-needed" subcommand to tell if
it is necessary to perform various maintenance tasks.
* kn/maintenance-is-needed:
maintenance: add 'is-needed' subcommand
maintenance: add checking logic in `pack_refs_condition()`
refs: add a `optimize_required` field to `struct ref_storage_be`
reftable/stack: add function to check if optimization is required
reftable/stack: return stack segments directly
The diff algorithm used in 'git-blame(1)' is set to 'myers',
without the possibility to change it aside from the `--minimal` option.
There has been long-standing interest in changing the default diff
algorithm to "histogram", and Git 3.0 was floated as a possible occasion
for taking some steps towards that:
https://lore.kernel.org/git/xmqqed873vgn.fsf@gitster.g/
As a preparation for this move, it is worth making sure that the diff
algorithm is configurable where useful.
Make it configurable in the `git-blame(1)` command by introducing the
`--diff-algorithm` option and make honor the `diff.algorithm` config
variable. Keep Myers diff as the default.
Signed-off-by: Antonin Delpeuch <antonin@delpeuch.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`--branch` and `--long` refer to git-status(1) options but they don’t tell us
what `short-format` and `long-format` are, respectively. And `--null`
mentions “status” but does not link to the command.
Refer to git-config(1) on `--branch` like `--short` does.
`long-format` is the git-status(1) output. So we can just say that
directly.
Replace “status” with a `linkgit` on `--null`.
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The build procedure based on meson learned to allow builders to
specify the directory to install HTML documents.
* dk/meson-html-dir:
meson: make GIT_HTML_PATH configurable
The 'git-maintenance(1)' command provides tooling to run maintenance
tasks over Git repositories. The 'run' subcommand, as the name suggests,
runs the maintenance tasks. When used with the '--auto' flag, it uses
heuristics to determine if the required thresholds are met for running
said maintenance tasks.
There is however a lack of insight into these heuristics. Meaning, the
checks are linked to the execution.
Add a new 'is-needed' subcommand to 'git-maintenance(1)' which allows
users to simply check if it is needed to run maintenance without
performing it.
This subcommand can check if it is needed to run maintenance without
actually running it. Ideally it should be used with the '--auto' flag,
which would allow users to check if the thresholds required are met. The
subcommand also supports the '--task' flag which can be used to check
specific maintenance tasks.
While adding the respective tests in 't/t7900-maintenance.sh', remove a
duplicate of the test: 'worktree-prune task with --auto honors
maintenance.worktree-prune.auto'.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Acked-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A recently added configuration variable and command line option
syntax ":(optional)" for values that are of filename type
inconsistently behaved on an empty file (configuration took it
happily, while the command line option pretended as if it did not
exist), which has been corrected.
* dk/parseopt-optional-filename-fixes:
parseopt: remove unreachable code
parseopt: restore const qualifier to parsed filename
config: use boolean type for a simple flag
parseopt: use boolean type for a simple flag
doc: clarify command equivalence comment
parseopt: fix :(optional) at command line to only ignore missing files
Makefile-based builds can configure Git's internal HTML_PATH by defining
htmldir, which is useful for packagers that put documentation in
different locations. Gentoo, for example, uses version-suffixed
directories like ${prefix}/share/doc/git-2.51 and puts the HTML
documentation in an 'html' subdirectory of the same.
Propagate the same configuration knob to Meson-based builds so that
"git --html-path" on such systems can be configured to output the
correct directory.
Signed-off-by: D. Ben Knoble <ben.knoble+github@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the documentation to clearly describe how the server responds when a
client sends an invalid or malformed `want` line during the HTTP protocol
exchange. The server includes the offending object name in its error message.
Signed-off-by: Queen Ediri Jessa <qjessa662@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The help text and manual page of "git bisect" command have been
made consistent with each other.
* rz/t0450-bisect-doc-update:
bisect: update usage and docs to match each other
Add a configuration variable to control the default behavior of git replay
for updating references. This allows users who prefer the traditional
pipeline output to set it once in their config instead of passing
--ref-action=print with every command.
The config variable uses string values that mirror the behavior modes:
* replay.refAction = update (default): atomic ref updates
* replay.refAction = print: output commands for pipeline
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Elijah Newren <newren@gmail.com>
Helped-by: Christian Couder <christian.couder@gmail.com>
Helped-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Siddharth Asthana <siddharthasthana31@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git replay command currently outputs update commands that can be
piped to update-ref to achieve a rebase, e.g.
git replay --onto main topic1..topic2 | git update-ref --stdin
This separation had advantages for three special cases:
* it made testing easy (when state isn't modified from one step to
the next, you don't need to make temporary branches or have undo
commands, or try to track the changes)
* it provided a natural can-it-rebase-cleanly (and what would it
rebase to) capability without automatically updating refs, similar
to a --dry-run
* it provided a natural low-level tool for the suite of hash-object,
mktree, commit-tree, mktag, merge-tree, and update-ref, allowing
users to have another building block for experimentation and making
new tools
However, it should be noted that all three of these are somewhat
special cases; users, whether on the client or server side, would
almost certainly find it more ergonomic to simply have the updating
of refs be the default.
For server-side operations in particular, the pipeline architecture
creates process coordination overhead. Server implementations that need
to perform rebases atomically must maintain additional code to:
1. Spawn and manage a pipeline between git-replay and git-update-ref
2. Coordinate stdout/stderr streams across the pipe boundary
3. Handle partial failure states if the pipeline breaks mid-execution
4. Parse and validate the update-ref command output
Change the default behavior to update refs directly, and atomically (at
least to the extent supported by the refs backend in use). This
eliminates the process coordination overhead for the common case.
For users needing the traditional pipeline workflow, add a new
--ref-action=<mode> option that preserves the original behavior:
git replay --ref-action=print --onto main topic1..topic2 | git update-ref --stdin
The mode can be:
* update (default): Update refs directly using an atomic transaction
* print: Output update-ref commands for pipeline use
Test suite changes:
All existing tests that expected command output now use
--ref-action=print to preserve their original behavior. This keeps
the tests valid while allowing them to verify that the pipeline workflow
still works correctly.
New tests were added to verify:
- Default atomic behavior (no output, refs updated directly)
- Bare repository support (server-side use case)
- Equivalence between traditional pipeline and atomic updates
- Real atomicity using a lock file to verify all-or-nothing guarantee
- Test isolation using test_when_finished to clean up state
- Reflog messages include replay mode and target
A following commit will add a replay.refAction configuration
option for users who prefer the traditional pipeline output as their
default behavior.
Helped-by: Elijah Newren <newren@gmail.com>
Helped-by: Patrick Steinhardt <ps@pks.im>
Helped-by: Christian Couder <christian.couder@gmail.com>
Helped-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Siddharth Asthana <siddharthasthana31@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The patterns used in the .gitignore files use backslash in the way
documented for fnmatch(3); document as such to reduce confusion.
* jk/doc-backslash-in-exclude:
doc: document backslash in gitignore patterns
The "MyFirstContribution" tutorial tells the reader how to send out
their patches; the section gained a hint to verify the message
reached the mailing list.
* qj/doc-my1stcontrib-email-verify:
MyFirstContribution: add note on confirming patches
* ps/ref-peeled-tags: (23 commits)
t7004: do not chdir around in the main process
ref-filter: fix stale parsed objects
ref-filter: parse objects on demand
ref-filter: detect broken tags when dereferencing them
refs: don't store peeled object IDs for invalid tags
object: add flag to `peel_object()` to verify object type
refs: drop infrastructure to peel via iterators
refs: drop `current_ref_iter` hack
builtin/show-ref: convert to use `reference_get_peeled_oid()`
ref-filter: propagate peeled object ID
upload-pack: convert to use `reference_get_peeled_oid()`
refs: expose peeled object ID via the iterator
refs: refactor reference status flags
refs: fully reset `struct ref_iterator::ref` on iteration
refs: introduce `.ref` field for the base iterator
refs: introduce wrapper struct for `each_ref_fn`
builtin/repo: add progress meter for structure stats
builtin/repo: add keyvalue and nul format for structure stats
builtin/repo: add object counts in structure output
builtin/repo: introduce structure subcommand
...
"git maintenance" command learns the "geometric" strategy where it
avoids doing maintenance tasks that rebuilds everything from
scratch.
* ps/maintenance-geometric:
t7900: fix a flaky test due to git-repack always regenerating MIDX
builtin/maintenance: introduce "geometric" strategy
builtin/maintenance: make "gc" strategy accessible
builtin/maintenance: extend "maintenance.strategy" to manual maintenance
builtin/maintenance: run maintenance tasks depending on type
builtin/maintenance: improve readability of strategies
builtin/maintenance: don't silently ignore invalid strategy
builtin/maintenance: make the geometric factor configurable
builtin/maintenance: introduce "geometric-repack" task
builtin/gc: make `too_many_loose_objects()` reusable without GC config
builtin/gc: remove global `repack` variable
"Symlink symref" has been added to the list of things that will
disappear at Git 3.0 boundary.
* ps/symlink-symref-deprecation:
refs/files: deprecate writing symrefs as symbolic links
A new configuration variable commitGraph.changedPaths allows to
turn "--changed-paths" on by default for "git commit-graph".
* ey/commit-graph-changed-paths-config:
commit-graph: add new config for changed-paths & recommend it in scalar
Because gitignore patterns are passed to fnmatch, the handling of
backslashes is the same as it is there: it can be used to escape
metacharacters. We do reference fnmatch(3) for more details, but it may
be friendlier to point out this implication explicitly (especially for
people who want to know about backslash handling and search the
documentation for that word). There are also two cases that I've seen
some other backslash-escaping systems handle differently, so let's
describe those:
1. A backslash before any character treats that character literally,
even if it's not otherwise a meta-character. As opposed to
including the backslash itself (like "foo\bar" in shell expands to
"foo\bar") or forbidding it ("foo\zar" is required to produce a
diagnostic in C).
2. A backslash at the end of the string is an invalid pattern (and not
a literal backslash).
This second one in particular was a point of confusion between our
implementation and the one in JGit. Our wildmatch behavior matches what
POSIX specifies for fnmatch, so the code and documentation are in line.
But let's add a test to cover this case. Note that the behavior here
differs between wildmatch itself (which is what gitignore will use) and
pathspec matching (which will only turn to wildmatch if a literal match
fails). So we match "foo\" to "foo\" in pathspecs, but not via
gitignore.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the usage string of `git bisect` and documentation to match each
other. While at it, also:
1. Move the synopsis of `git bisect` subcommands to the synopsis
section, so that the test `t0450-txt-doc-vs-help.sh` can pass.
2. Document the `git bisect next` subcommand, which exists in the code
but is missing from the documentation.
See also: [1].
[1]: https://lore.kernel.org/git/3DA38465-7636-4EEF-B074-53E4628F5355@gmail.com/
Suggested-by: Ben Knoble <ben.knoble@gmail.com>
Signed-off-by: Ruoyu Zhong <zhongruoyu@outlook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The placeholder markup is underscore (_), not backtick (`) as well.
The inline-verbatim markup (backticks) handle interior formatting. This
means in this case that it applies HTML `<code>` to the underscores and
`<em>` to the placeholder.
That is the effect, anyway; we can see from the rest of 042d6f34 (doc:
git-checkout: clarify `-b` and `-B`, 2025-09-10) that this was probably
an unintended mix-up.
Acked-by: Julia Evans <julia@jvns.ca>
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fast-import" is taught to handle signed tags, just like it
recently learned to handle signed commits, in different ways.
* cc/fast-import-strip-signed-tags:
fast-import: add '--signed-tags=<mode>' option
fast-export: handle all kinds of tag signatures
t9350: properly count annotated tags
lib-gpg: allow tests with GPGSM or GPGSSH prereq first
doc: git-tag: stop focusing on GPG signed tags
"git sparse-checkout" subcommand learned a new "clean" action to
prune otherwise unused working-tree files that are outside the
areas of interest.
* ds/sparse-checkout-clean:
sparse-index: improve advice message instructions
t: expand tests around sparse merges and clean
sparse-index: point users to new 'clean' action
sparse-checkout: add --verbose option to 'clean'
dir: add generic "walk all files" helper
sparse-checkout: match some 'clean' behavior
sparse-checkout: add basics of 'clean' command
sparse-checkout: remove use of the_repository
Add a note after the `git send-email` section explaining how
contributors can confirm that their patches reached the mailing
list by checking https://lore.kernel.org/git/. This helps
contributors verify that their emails were successfully delivered.
Signed-off-by: Queen Ediri Jessa <qjessa662@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
