mirror of
https://github.com/git/git.git
synced 2025-12-12 20:36:24 +01:00
e42667241d
Every once in a while, users report that editing the commit summaries
in the todo list does not get reflected in the rebase operation,
suggesting that users are (a) only using one-line commit messages, and
(b) not understanding that the commit summaries are merely helpful
comments to help them find the right hashes.
It may be difficult to correct users' poor commit messages, but we can
at least try to make it clearer that the commit summaries are not
directives of some sort by inserting a comment character. Hopefully
that leads to them looking a little further and noticing the hints at
the bottom to use 'reword' or 'edit' directives.
Yes, this change may look funny at first since it hardcodes '#' rather
than using comment_line_str. However:
* comment_line_str exists to allow disambiguation between lines in
a commit message and lines that are instructions to users editing
the commit message. No such disambiguation is needed for these
comments that occur on the same line after existing directives
* the exact "comment" character(s) on regular pick lines used aren't
actually important; I could have used anything, including completely
random variable length text for each line and it'd work because we
ignore everything after 'pick' and the hash.
* The whole point of this change is to signal to users that they
should NOT be editing any part of the line after the hash (and if
they do so, their edits will be ignored), while the whole point of
comment_line_str is to allow highly flexible editing. So making
it more general by using comment_line_str actually feels
counterproductive.
* The character for merge directives absolutely must be '#'; that
has been deeply hardcoded for a long time (see below), and will
break if some other comment character is used instead. In a
desire to have pick and merge directives be similar, I use the
same comment character for both.
* Perhaps merge directives could be fixed to not be inflexible about
the comment character used, if someone feels highly motivated, but
I think that should be done in a separate follow-on patch.
Here are (some of?) the locations where '#' has already been hardcoded
for a long time for merges:
1) In check_label_or_ref_arg():
case TODO_LABEL:
/*
* '#' is not a valid label as the merge command uses it to
* separate merge parents from the commit subject.
*/
2) In do_merge():
/*
* For octopus merges, the arg starts with the list of revisions to be
* merged. The list is optionally followed by '#' and the oneline.
*/
merge_arg_len = oneline_offset = arg_len;
for (p = arg; p - arg < arg_len; p += strspn(p, " \t\n")) {
if (!*p)
break;
if (*p == '#' && (!p[1] || isspace(p[1]))) {
3) In label_oid():
if ((buf->len == the_hash_algo->hexsz &&
!get_oid_hex(label, &dummy)) ||
(buf->len == 1 && *label == '#') ||
hashmap_get_from_hash(&state->labels,
strihash(label), label)) {
/*
* If the label already exists, or if the label is a
* valid full OID, or the label is a '#' (which we use
* as a separator between merge heads and oneline), we
* append a dash and a number to make it unique.
*/
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
1065 lines
35 KiB
Bash
Executable File
1065 lines
35 KiB
Bash
Executable File
#!/bin/sh
|
|
#
|
|
# Copyright (c) 2012 Valentin Duperray, Lucien Kong, Franck Jonas,
|
|
# Thomas Nguy, Khoi Nguyen
|
|
# Grenoble INP Ensimag
|
|
#
|
|
|
|
test_description='git status advice'
|
|
|
|
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main
|
|
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
|
|
|
|
. ./test-lib.sh
|
|
|
|
. "$TEST_DIRECTORY"/lib-rebase.sh
|
|
|
|
set_fake_editor
|
|
|
|
test_expect_success 'prepare for conflicts' '
|
|
git config --global advice.statusuoption false &&
|
|
test_commit init main.txt init &&
|
|
git branch conflicts &&
|
|
test_commit on_main main.txt on_main &&
|
|
git checkout conflicts &&
|
|
test_commit on_conflicts main.txt on_conflicts
|
|
'
|
|
|
|
|
|
test_expect_success 'status when conflicts unresolved' '
|
|
test_must_fail git merge main &&
|
|
cat >expected <<\EOF &&
|
|
On branch conflicts
|
|
You have unmerged paths.
|
|
(fix conflicts and run "git commit")
|
|
(use "git merge --abort" to abort the merge)
|
|
|
|
Unmerged paths:
|
|
(use "git add <file>..." to mark resolution)
|
|
both modified: main.txt
|
|
|
|
no changes added to commit (use "git add" and/or "git commit -a")
|
|
EOF
|
|
git status --untracked-files=no >actual &&
|
|
test_cmp expected actual
|
|
'
|
|
|
|
|
|
test_expect_success 'status when conflicts resolved before commit' '
|
|
git reset --hard conflicts &&
|
|
test_must_fail git merge main &&
|
|
echo one >main.txt &&
|
|
git add main.txt &&
|
|
cat >expected <<\EOF &&
|
|
On branch conflicts
|
|
All conflicts fixed but you are still merging.
|
|
(use "git commit" to conclude merge)
|
|
|
|
Changes to be committed:
|
|
modified: main.txt
|
|
|
|
Untracked files not listed (use -u option to show untracked files)
|
|
EOF
|
|
git status --untracked-files=no >actual &&
|
|
test_cmp expected actual
|
|
'
|
|
|
|
|
|
test_expect_success 'prepare for rebase conflicts' '
|
|
git reset --hard main &&
|
|
git checkout -b rebase_conflicts &&
|
|
test_commit one_rebase main.txt one &&
|
|
test_commit two_rebase main.txt two &&
|
|
test_commit three_rebase main.txt three
|
|
'
|
|
|
|
|
|
test_expect_success 'status when rebase --apply in progress before resolving conflicts' '
|
|
test_when_finished "git rebase --abort" &&
|
|
ONTO=$(git rev-parse --short HEAD^^) &&
|
|
test_must_fail git rebase --apply HEAD^ --onto HEAD^^ &&
|
|
cat >expected <<EOF &&
|
|
rebase in progress; onto $ONTO
|
|
You are currently rebasing branch '\''rebase_conflicts'\'' on '\''$ONTO'\''.
|
|
(fix conflicts and then run "git rebase --continue")
|
|
(use "git rebase --skip" to skip this patch)
|
|
(use "git rebase --abort" to check out the original branch)
|
|
|
|
Unmerged paths:
|
|
(use "git restore --staged <file>..." to unstage)
|
|
(use "git add <file>..." to mark resolution)
|
|
both modified: main.txt
|
|
|
|
no changes added to commit (use "git add" and/or "git commit -a")
|
|
EOF
|
|
git status --untracked-files=no >actual &&
|
|
test_cmp expected actual
|
|
'
|
|
|
|
|
|
test_expect_success 'status when rebase --apply in progress before rebase --continue' '
|
|
git reset --hard rebase_conflicts &&
|
|
test_when_finished "git rebase --abort" &&
|
|
ONTO=$(git rev-parse --short HEAD^^) &&
|
|
test_must_fail git rebase --apply HEAD^ --onto HEAD^^ &&
|
|
echo three >main.txt &&
|
|
git add main.txt &&
|
|
cat >expected <<EOF &&
|
|
rebase in progress; onto $ONTO
|
|
You are currently rebasing branch '\''rebase_conflicts'\'' on '\''$ONTO'\''.
|
|
(all conflicts fixed: run "git rebase --continue")
|
|
|
|
Changes to be committed:
|
|
(use "git restore --staged <file>..." to unstage)
|
|
modified: main.txt
|
|
|
|
Untracked files not listed (use -u option to show untracked files)
|
|
EOF
|
|
git status --untracked-files=no >actual &&
|
|
test_cmp expected actual
|
|
'
|
|
|
|
|
|
test_expect_success 'prepare for rebase_i_conflicts' '
|
|
git reset --hard main &&
|
|
git checkout -b rebase_i_conflicts &&
|
|
test_commit one_unmerge main.txt one_unmerge &&
|
|
git branch rebase_i_conflicts_second &&
|
|
test_commit one_main main.txt one_main &&
|
|
git checkout rebase_i_conflicts_second &&
|
|
test_commit one_second main.txt one_second
|
|
'
|
|
|
|
|
|
test_expect_success 'status during rebase -i when conflicts unresolved' '
|
|
test_when_finished "git rebase --abort" &&
|
|
ONTO=$(git rev-parse --short rebase_i_conflicts) &&
|
|
LAST_COMMIT=$(git rev-parse --short rebase_i_conflicts_second) &&
|
|
test_must_fail git rebase -i rebase_i_conflicts &&
|
|
cat >expected <<EOF &&
|
|
interactive rebase in progress; onto $ONTO
|
|
Last command done (1 command done):
|
|
pick $LAST_COMMIT # one_second
|
|
No commands remaining.
|
|
You are currently rebasing branch '\''rebase_i_conflicts_second'\'' on '\''$ONTO'\''.
|
|
(fix conflicts and then run "git rebase --continue")
|
|
(use "git rebase --skip" to skip this patch)
|
|
(use "git rebase --abort" to check out the original branch)
|
|
|
|
Unmerged paths:
|
|
(use "git restore --staged <file>..." to unstage)
|
|
(use "git add <file>..." to mark resolution)
|
|
both modified: main.txt
|
|
|
|
no changes added to commit (use "git add" and/or "git commit -a")
|
|
EOF
|
|
git status --untracked-files=no >actual &&
|
|
test_cmp expected actual
|
|
'
|
|
|
|
|
|
test_expect_success 'status during rebase -i after resolving conflicts' '
|
|
git reset --hard rebase_i_conflicts_second &&
|
|
test_when_finished "git rebase --abort" &&
|
|
ONTO=$(git rev-parse --short rebase_i_conflicts) &&
|
|
LAST_COMMIT=$(git rev-parse --short rebase_i_conflicts_second) &&
|
|
test_must_fail git rebase -i rebase_i_conflicts &&
|
|
git add main.txt &&
|
|
cat >expected <<EOF &&
|
|
interactive rebase in progress; onto $ONTO
|
|
Last command done (1 command done):
|
|
pick $LAST_COMMIT # one_second
|
|
No commands remaining.
|
|
You are currently rebasing branch '\''rebase_i_conflicts_second'\'' on '\''$ONTO'\''.
|
|
(all conflicts fixed: run "git rebase --continue")
|
|
|
|
Changes to be committed:
|
|
(use "git restore --staged <file>..." to unstage)
|
|
modified: main.txt
|
|
|
|
Untracked files not listed (use -u option to show untracked files)
|
|
EOF
|
|
git status --untracked-files=no >actual &&
|
|
test_cmp expected actual
|
|
'
|
|
|
|
|
|
test_expect_success 'status when rebasing -i in edit mode' '
|
|
git reset --hard main &&
|
|
git checkout -b rebase_i_edit &&
|
|
test_commit one_rebase_i main.txt one &&
|
|
test_commit two_rebase_i main.txt two &&
|
|
COMMIT2=$(git rev-parse --short rebase_i_edit) &&
|
|
test_commit three_rebase_i main.txt three &&
|
|
COMMIT3=$(git rev-parse --short rebase_i_edit) &&
|
|
FAKE_LINES="1 edit 2" &&
|
|
export FAKE_LINES &&
|
|
test_when_finished "git rebase --abort" &&
|
|
ONTO=$(git rev-parse --short HEAD~2) &&
|
|
git rebase -i HEAD~2 &&
|
|
cat >expected <<EOF &&
|
|
interactive rebase in progress; onto $ONTO
|
|
Last commands done (2 commands done):
|
|
pick $COMMIT2 # two_rebase_i
|
|
edit $COMMIT3 # three_rebase_i
|
|
No commands remaining.
|
|
You are currently editing a commit while rebasing branch '\''rebase_i_edit'\'' on '\''$ONTO'\''.
|
|
(use "git commit --amend" to amend the current commit)
|
|
(use "git rebase --continue" once you are satisfied with your changes)
|
|
|
|
nothing to commit (use -u to show untracked files)
|
|
EOF
|
|
git status --untracked-files=no >actual &&
|
|
test_cmp expected actual
|
|
'
|
|
|
|
|
|
test_expect_success 'status when splitting a commit' '
|
|
git reset --hard main &&
|
|
git checkout -b split_commit &&
|
|
test_commit one_split main.txt one &&
|
|
test_commit two_split main.txt two &&
|
|
COMMIT2=$(git rev-parse --short split_commit) &&
|
|
test_commit three_split main.txt three &&
|
|
COMMIT3=$(git rev-parse --short split_commit) &&
|
|
test_commit four_split main.txt four &&
|
|
COMMIT4=$(git rev-parse --short split_commit) &&
|
|
FAKE_LINES="1 edit 2 3" &&
|
|
export FAKE_LINES &&
|
|
test_when_finished "git rebase --abort" &&
|
|
ONTO=$(git rev-parse --short HEAD~3) &&
|
|
git rebase -i HEAD~3 &&
|
|
git reset HEAD^ &&
|
|
cat >expected <<EOF &&
|
|
interactive rebase in progress; onto $ONTO
|
|
Last commands done (2 commands done):
|
|
pick $COMMIT2 # two_split
|
|
edit $COMMIT3 # three_split
|
|
Next command to do (1 remaining command):
|
|
pick $COMMIT4 # four_split
|
|
(use "git rebase --edit-todo" to view and edit)
|
|
You are currently splitting a commit while rebasing branch '\''split_commit'\'' on '\''$ONTO'\''.
|
|
(Once your working directory is clean, run "git rebase --continue")
|
|
|
|
Changes not staged for commit:
|
|
(use "git add <file>..." to update what will be committed)
|
|
(use "git restore <file>..." to discard changes in working directory)
|
|
modified: main.txt
|
|
|
|
no changes added to commit (use "git add" and/or "git commit -a")
|
|
EOF
|
|
git status --untracked-files=no >actual &&
|
|
test_cmp expected actual
|
|
'
|
|
|
|
|
|
test_expect_success 'status after editing the last commit with --amend during a rebase -i' '
|
|
git reset --hard main &&
|
|
git checkout -b amend_last &&
|
|
test_commit one_amend main.txt one &&
|
|
test_commit two_amend main.txt two &&
|
|
test_commit three_amend main.txt three &&
|
|
COMMIT3=$(git rev-parse --short amend_last) &&
|
|
test_commit four_amend main.txt four &&
|
|
COMMIT4=$(git rev-parse --short amend_last) &&
|
|
FAKE_LINES="1 2 edit 3" &&
|
|
export FAKE_LINES &&
|
|
test_when_finished "git rebase --abort" &&
|
|
ONTO=$(git rev-parse --short HEAD~3) &&
|
|
git rebase -i HEAD~3 &&
|
|
git commit --amend -m "foo" &&
|
|
cat >expected <<EOF &&
|
|
interactive rebase in progress; onto $ONTO
|
|
Last commands done (3 commands done):
|
|
pick $COMMIT3 # three_amend
|
|
edit $COMMIT4 # four_amend
|
|
(see more in file .git/rebase-merge/done)
|
|
No commands remaining.
|
|
You are currently editing a commit while rebasing branch '\''amend_last'\'' on '\''$ONTO'\''.
|
|
(use "git commit --amend" to amend the current commit)
|
|
(use "git rebase --continue" once you are satisfied with your changes)
|
|
|
|
nothing to commit (use -u to show untracked files)
|
|
EOF
|
|
git status --untracked-files=no >actual &&
|
|
test_cmp expected actual
|
|
'
|
|
|
|
|
|
test_expect_success 'prepare for several edits' '
|
|
git reset --hard main &&
|
|
git checkout -b several_edits &&
|
|
test_commit one_edits main.txt one &&
|
|
test_commit two_edits main.txt two &&
|
|
test_commit three_edits main.txt three &&
|
|
test_commit four_edits main.txt four
|
|
'
|
|
|
|
|
|
test_expect_success 'status: (continue first edit) second edit' '
|
|
FAKE_LINES="edit 1 edit 2 3" &&
|
|
export FAKE_LINES &&
|
|
test_when_finished "git rebase --abort" &&
|
|
COMMIT2=$(git rev-parse --short several_edits^^) &&
|
|
COMMIT3=$(git rev-parse --short several_edits^) &&
|
|
COMMIT4=$(git rev-parse --short several_edits) &&
|
|
ONTO=$(git rev-parse --short HEAD~3) &&
|
|
git rebase -i HEAD~3 &&
|
|
git rebase --continue &&
|
|
cat >expected <<EOF &&
|
|
interactive rebase in progress; onto $ONTO
|
|
Last commands done (2 commands done):
|
|
edit $COMMIT2 # two_edits
|
|
edit $COMMIT3 # three_edits
|
|
Next command to do (1 remaining command):
|
|
pick $COMMIT4 # four_edits
|
|
(use "git rebase --edit-todo" to view and edit)
|
|
You are currently editing a commit while rebasing branch '\''several_edits'\'' on '\''$ONTO'\''.
|
|
(use "git commit --amend" to amend the current commit)
|
|
(use "git rebase --continue" once you are satisfied with your changes)
|
|
|
|
nothing to commit (use -u to show untracked files)
|
|
EOF
|
|
git status --untracked-files=no >actual &&
|
|
test_cmp expected actual
|
|
'
|
|
|
|
|
|
test_expect_success 'status: (continue first edit) second edit and split' '
|
|
git reset --hard several_edits &&
|
|
FAKE_LINES="edit 1 edit 2 3" &&
|
|
export FAKE_LINES &&
|
|
test_when_finished "git rebase --abort" &&
|
|
COMMIT2=$(git rev-parse --short several_edits^^) &&
|
|
COMMIT3=$(git rev-parse --short several_edits^) &&
|
|
COMMIT4=$(git rev-parse --short several_edits) &&
|
|
ONTO=$(git rev-parse --short HEAD~3) &&
|
|
git rebase -i HEAD~3 &&
|
|
git rebase --continue &&
|
|
git reset HEAD^ &&
|
|
cat >expected <<EOF &&
|
|
interactive rebase in progress; onto $ONTO
|
|
Last commands done (2 commands done):
|
|
edit $COMMIT2 # two_edits
|
|
edit $COMMIT3 # three_edits
|
|
Next command to do (1 remaining command):
|
|
pick $COMMIT4 # four_edits
|
|
(use "git rebase --edit-todo" to view and edit)
|
|
You are currently splitting a commit while rebasing branch '\''several_edits'\'' on '\''$ONTO'\''.
|
|
(Once your working directory is clean, run "git rebase --continue")
|
|
|
|
Changes not staged for commit:
|
|
(use "git add <file>..." to update what will be committed)
|
|
(use "git restore <file>..." to discard changes in working directory)
|
|
modified: main.txt
|
|
|
|
no changes added to commit (use "git add" and/or "git commit -a")
|
|
EOF
|
|
git status --untracked-files=no >actual &&
|
|
test_cmp expected actual
|
|
'
|
|
|
|
|
|
test_expect_success 'status: (continue first edit) second edit and amend' '
|
|
git reset --hard several_edits &&
|
|
FAKE_LINES="edit 1 edit 2 3" &&
|
|
export FAKE_LINES &&
|
|
test_when_finished "git rebase --abort" &&
|
|
COMMIT2=$(git rev-parse --short several_edits^^) &&
|
|
COMMIT3=$(git rev-parse --short several_edits^) &&
|
|
COMMIT4=$(git rev-parse --short several_edits) &&
|
|
ONTO=$(git rev-parse --short HEAD~3) &&
|
|
git rebase -i HEAD~3 &&
|
|
git rebase --continue &&
|
|
git commit --amend -m "foo" &&
|
|
cat >expected <<EOF &&
|
|
interactive rebase in progress; onto $ONTO
|
|
Last commands done (2 commands done):
|
|
edit $COMMIT2 # two_edits
|
|
edit $COMMIT3 # three_edits
|
|
Next command to do (1 remaining command):
|
|
pick $COMMIT4 # four_edits
|
|
(use "git rebase --edit-todo" to view and edit)
|
|
You are currently editing a commit while rebasing branch '\''several_edits'\'' on '\''$ONTO'\''.
|
|
(use "git commit --amend" to amend the current commit)
|
|
(use "git rebase --continue" once you are satisfied with your changes)
|
|
|
|
nothing to commit (use -u to show untracked files)
|
|
EOF
|
|
git status --untracked-files=no >actual &&
|
|
test_cmp expected actual
|
|
'
|
|
|
|
|
|
test_expect_success 'status: (amend first edit) second edit' '
|
|
git reset --hard several_edits &&
|
|
FAKE_LINES="edit 1 edit 2 3" &&
|
|
export FAKE_LINES &&
|
|
test_when_finished "git rebase --abort" &&
|
|
COMMIT2=$(git rev-parse --short several_edits^^) &&
|
|
COMMIT3=$(git rev-parse --short several_edits^) &&
|
|
COMMIT4=$(git rev-parse --short several_edits) &&
|
|
ONTO=$(git rev-parse --short HEAD~3) &&
|
|
git rebase -i HEAD~3 &&
|
|
git commit --amend -m "a" &&
|
|
git rebase --continue &&
|
|
cat >expected <<EOF &&
|
|
interactive rebase in progress; onto $ONTO
|
|
Last commands done (2 commands done):
|
|
edit $COMMIT2 # two_edits
|
|
edit $COMMIT3 # three_edits
|
|
Next command to do (1 remaining command):
|
|
pick $COMMIT4 # four_edits
|
|
(use "git rebase --edit-todo" to view and edit)
|
|
You are currently editing a commit while rebasing branch '\''several_edits'\'' on '\''$ONTO'\''.
|
|
(use "git commit --amend" to amend the current commit)
|
|
(use "git rebase --continue" once you are satisfied with your changes)
|
|
|
|
nothing to commit (use -u to show untracked files)
|
|
EOF
|
|
git status --untracked-files=no >actual &&
|
|
test_cmp expected actual
|
|
'
|
|
|
|
|
|
test_expect_success 'status: (amend first edit) second edit and split' '
|
|
git reset --hard several_edits &&
|
|
FAKE_LINES="edit 1 edit 2 3" &&
|
|
export FAKE_LINES &&
|
|
test_when_finished "git rebase --abort" &&
|
|
ONTO=$(git rev-parse --short HEAD~3) &&
|
|
COMMIT2=$(git rev-parse --short several_edits^^) &&
|
|
COMMIT3=$(git rev-parse --short several_edits^) &&
|
|
COMMIT4=$(git rev-parse --short several_edits) &&
|
|
git rebase -i HEAD~3 &&
|
|
git commit --amend -m "b" &&
|
|
git rebase --continue &&
|
|
git reset HEAD^ &&
|
|
cat >expected <<EOF &&
|
|
interactive rebase in progress; onto $ONTO
|
|
Last commands done (2 commands done):
|
|
edit $COMMIT2 # two_edits
|
|
edit $COMMIT3 # three_edits
|
|
Next command to do (1 remaining command):
|
|
pick $COMMIT4 # four_edits
|
|
(use "git rebase --edit-todo" to view and edit)
|
|
You are currently splitting a commit while rebasing branch '\''several_edits'\'' on '\''$ONTO'\''.
|
|
(Once your working directory is clean, run "git rebase --continue")
|
|
|
|
Changes not staged for commit:
|
|
(use "git add <file>..." to update what will be committed)
|
|
(use "git restore <file>..." to discard changes in working directory)
|
|
modified: main.txt
|
|
|
|
no changes added to commit (use "git add" and/or "git commit -a")
|
|
EOF
|
|
git status --untracked-files=no >actual &&
|
|
test_cmp expected actual
|
|
'
|
|
|
|
|
|
test_expect_success 'status: (amend first edit) second edit and amend' '
|
|
git reset --hard several_edits &&
|
|
FAKE_LINES="edit 1 edit 2 3" &&
|
|
export FAKE_LINES &&
|
|
test_when_finished "git rebase --abort" &&
|
|
COMMIT2=$(git rev-parse --short several_edits^^) &&
|
|
COMMIT3=$(git rev-parse --short several_edits^) &&
|
|
COMMIT4=$(git rev-parse --short several_edits) &&
|
|
ONTO=$(git rev-parse --short HEAD~3) &&
|
|
git rebase -i HEAD~3 &&
|
|
git commit --amend -m "c" &&
|
|
git rebase --continue &&
|
|
git commit --amend -m "d" &&
|
|
cat >expected <<EOF &&
|
|
interactive rebase in progress; onto $ONTO
|
|
Last commands done (2 commands done):
|
|
edit $COMMIT2 # two_edits
|
|
edit $COMMIT3 # three_edits
|
|
Next command to do (1 remaining command):
|
|
pick $COMMIT4 # four_edits
|
|
(use "git rebase --edit-todo" to view and edit)
|
|
You are currently editing a commit while rebasing branch '\''several_edits'\'' on '\''$ONTO'\''.
|
|
(use "git commit --amend" to amend the current commit)
|
|
(use "git rebase --continue" once you are satisfied with your changes)
|
|
|
|
nothing to commit (use -u to show untracked files)
|
|
EOF
|
|
git status --untracked-files=no >actual &&
|
|
test_cmp expected actual
|
|
'
|
|
|
|
|
|
test_expect_success 'status: (split first edit) second edit' '
|
|
git reset --hard several_edits &&
|
|
FAKE_LINES="edit 1 edit 2 3" &&
|
|
export FAKE_LINES &&
|
|
test_when_finished "git rebase --abort" &&
|
|
COMMIT2=$(git rev-parse --short several_edits^^) &&
|
|
COMMIT3=$(git rev-parse --short several_edits^) &&
|
|
COMMIT4=$(git rev-parse --short several_edits) &&
|
|
ONTO=$(git rev-parse --short HEAD~3) &&
|
|
git rebase -i HEAD~3 &&
|
|
git reset HEAD^ &&
|
|
git add main.txt &&
|
|
git commit -m "e" &&
|
|
git rebase --continue &&
|
|
cat >expected <<EOF &&
|
|
interactive rebase in progress; onto $ONTO
|
|
Last commands done (2 commands done):
|
|
edit $COMMIT2 # two_edits
|
|
edit $COMMIT3 # three_edits
|
|
Next command to do (1 remaining command):
|
|
pick $COMMIT4 # four_edits
|
|
(use "git rebase --edit-todo" to view and edit)
|
|
You are currently editing a commit while rebasing branch '\''several_edits'\'' on '\''$ONTO'\''.
|
|
(use "git commit --amend" to amend the current commit)
|
|
(use "git rebase --continue" once you are satisfied with your changes)
|
|
|
|
nothing to commit (use -u to show untracked files)
|
|
EOF
|
|
git status --untracked-files=no >actual &&
|
|
test_cmp expected actual
|
|
'
|
|
|
|
|
|
test_expect_success 'status: (split first edit) second edit and split' '
|
|
git reset --hard several_edits &&
|
|
FAKE_LINES="edit 1 edit 2 3" &&
|
|
export FAKE_LINES &&
|
|
test_when_finished "git rebase --abort" &&
|
|
COMMIT2=$(git rev-parse --short several_edits^^) &&
|
|
COMMIT3=$(git rev-parse --short several_edits^) &&
|
|
COMMIT4=$(git rev-parse --short several_edits) &&
|
|
ONTO=$(git rev-parse --short HEAD~3) &&
|
|
git rebase -i HEAD~3 &&
|
|
git reset HEAD^ &&
|
|
git add main.txt &&
|
|
git commit --amend -m "f" &&
|
|
git rebase --continue &&
|
|
git reset HEAD^ &&
|
|
cat >expected <<EOF &&
|
|
interactive rebase in progress; onto $ONTO
|
|
Last commands done (2 commands done):
|
|
edit $COMMIT2 # two_edits
|
|
edit $COMMIT3 # three_edits
|
|
Next command to do (1 remaining command):
|
|
pick $COMMIT4 # four_edits
|
|
(use "git rebase --edit-todo" to view and edit)
|
|
You are currently splitting a commit while rebasing branch '\''several_edits'\'' on '\''$ONTO'\''.
|
|
(Once your working directory is clean, run "git rebase --continue")
|
|
|
|
Changes not staged for commit:
|
|
(use "git add <file>..." to update what will be committed)
|
|
(use "git restore <file>..." to discard changes in working directory)
|
|
modified: main.txt
|
|
|
|
no changes added to commit (use "git add" and/or "git commit -a")
|
|
EOF
|
|
git status --untracked-files=no >actual &&
|
|
test_cmp expected actual
|
|
'
|
|
|
|
|
|
test_expect_success 'status: (split first edit) second edit and amend' '
|
|
git reset --hard several_edits &&
|
|
FAKE_LINES="edit 1 edit 2 3" &&
|
|
export FAKE_LINES &&
|
|
test_when_finished "git rebase --abort" &&
|
|
COMMIT2=$(git rev-parse --short several_edits^^) &&
|
|
COMMIT3=$(git rev-parse --short several_edits^) &&
|
|
COMMIT4=$(git rev-parse --short several_edits) &&
|
|
ONTO=$(git rev-parse --short HEAD~3) &&
|
|
git rebase -i HEAD~3 &&
|
|
git reset HEAD^ &&
|
|
git add main.txt &&
|
|
git commit --amend -m "g" &&
|
|
git rebase --continue &&
|
|
git commit --amend -m "h" &&
|
|
cat >expected <<EOF &&
|
|
interactive rebase in progress; onto $ONTO
|
|
Last commands done (2 commands done):
|
|
edit $COMMIT2 # two_edits
|
|
edit $COMMIT3 # three_edits
|
|
Next command to do (1 remaining command):
|
|
pick $COMMIT4 # four_edits
|
|
(use "git rebase --edit-todo" to view and edit)
|
|
You are currently editing a commit while rebasing branch '\''several_edits'\'' on '\''$ONTO'\''.
|
|
(use "git commit --amend" to amend the current commit)
|
|
(use "git rebase --continue" once you are satisfied with your changes)
|
|
|
|
nothing to commit (use -u to show untracked files)
|
|
EOF
|
|
git status --untracked-files=no >actual &&
|
|
test_cmp expected actual
|
|
'
|
|
|
|
|
|
test_expect_success 'prepare am_session' '
|
|
git reset --hard main &&
|
|
git checkout -b am_session &&
|
|
test_commit one_am one.txt "one" &&
|
|
test_commit two_am two.txt "two" &&
|
|
test_commit three_am three.txt "three"
|
|
'
|
|
|
|
|
|
test_expect_success 'status in an am session: file already exists' '
|
|
git checkout -b am_already_exists &&
|
|
test_when_finished "rm Maildir/* && git am --abort" &&
|
|
git format-patch -1 -oMaildir &&
|
|
test_must_fail git am Maildir/*.patch &&
|
|
cat >expected <<\EOF &&
|
|
On branch am_already_exists
|
|
You are in the middle of an am session.
|
|
(fix conflicts and then run "git am --continue")
|
|
(use "git am --skip" to skip this patch)
|
|
(use "git am --abort" to restore the original branch)
|
|
|
|
nothing to commit (use -u to show untracked files)
|
|
EOF
|
|
git status --untracked-files=no >actual &&
|
|
test_cmp expected actual
|
|
'
|
|
|
|
|
|
test_expect_success 'status in an am session: file does not exist' '
|
|
git reset --hard am_session &&
|
|
git checkout -b am_not_exists &&
|
|
git rm three.txt &&
|
|
git commit -m "delete three.txt" &&
|
|
test_when_finished "rm Maildir/* && git am --abort" &&
|
|
git format-patch -1 -oMaildir &&
|
|
test_must_fail git am Maildir/*.patch &&
|
|
cat >expected <<\EOF &&
|
|
On branch am_not_exists
|
|
You are in the middle of an am session.
|
|
(fix conflicts and then run "git am --continue")
|
|
(use "git am --skip" to skip this patch)
|
|
(use "git am --abort" to restore the original branch)
|
|
|
|
nothing to commit (use -u to show untracked files)
|
|
EOF
|
|
git status --untracked-files=no >actual &&
|
|
test_cmp expected actual
|
|
'
|
|
|
|
|
|
test_expect_success 'status in an am session: empty patch' '
|
|
git reset --hard am_session &&
|
|
git checkout -b am_empty &&
|
|
test_when_finished "rm Maildir/* && git am --abort" &&
|
|
git format-patch -3 -oMaildir &&
|
|
git rm one.txt two.txt three.txt &&
|
|
git commit -m "delete all am_empty" &&
|
|
echo error >Maildir/0002-two_am.patch &&
|
|
test_must_fail git am Maildir/*.patch &&
|
|
cat >expected <<\EOF &&
|
|
On branch am_empty
|
|
You are in the middle of an am session.
|
|
The current patch is empty.
|
|
(use "git am --skip" to skip this patch)
|
|
(use "git am --allow-empty" to record this patch as an empty commit)
|
|
(use "git am --abort" to restore the original branch)
|
|
|
|
nothing to commit (use -u to show untracked files)
|
|
EOF
|
|
git status --untracked-files=no >actual &&
|
|
test_cmp expected actual
|
|
'
|
|
|
|
|
|
test_expect_success 'status when bisecting' '
|
|
git reset --hard main &&
|
|
git checkout -b bisect &&
|
|
test_commit one_bisect main.txt one &&
|
|
test_commit two_bisect main.txt two &&
|
|
test_commit three_bisect main.txt three &&
|
|
test_when_finished "git bisect reset" &&
|
|
git bisect start &&
|
|
git bisect bad &&
|
|
git bisect good one_bisect &&
|
|
TGT=$(git rev-parse --short two_bisect) &&
|
|
cat >expected <<EOF &&
|
|
HEAD detached at $TGT
|
|
You are currently bisecting, started from branch '\''bisect'\''.
|
|
(use "git bisect reset" to get back to the original branch)
|
|
|
|
nothing to commit (use -u to show untracked files)
|
|
EOF
|
|
git status --untracked-files=no >actual &&
|
|
test_cmp expected actual
|
|
'
|
|
|
|
|
|
test_expect_success 'status when bisecting while rebasing' '
|
|
git reset --hard main &&
|
|
test_when_finished "git rebase --abort" &&
|
|
ONTO=$(git rev-parse --short HEAD^) &&
|
|
FAKE_LINES="break" git rebase -i HEAD^ &&
|
|
test_when_finished "git checkout -" &&
|
|
git checkout -b bisect_while_rebasing &&
|
|
test_when_finished "git bisect reset" &&
|
|
git bisect start &&
|
|
cat >expected <<EOF &&
|
|
On branch bisect_while_rebasing
|
|
Last command done (1 command done):
|
|
break
|
|
No commands remaining.
|
|
You are currently editing a commit while rebasing branch '\''bisect'\'' on '\''$ONTO'\''.
|
|
(use "git commit --amend" to amend the current commit)
|
|
(use "git rebase --continue" once you are satisfied with your changes)
|
|
|
|
You are currently bisecting, started from branch '\''bisect_while_rebasing'\''.
|
|
(use "git bisect reset" to get back to the original branch)
|
|
|
|
nothing to commit (use -u to show untracked files)
|
|
EOF
|
|
git status --untracked-files=no >actual &&
|
|
test_cmp expected actual
|
|
'
|
|
|
|
|
|
test_expect_success 'status when rebase --apply conflicts with statushints disabled' '
|
|
git reset --hard main &&
|
|
git checkout -b statushints_disabled &&
|
|
test_when_finished "git config --local advice.statushints true" &&
|
|
git config --local advice.statushints false &&
|
|
test_commit one_statushints main.txt one &&
|
|
test_commit two_statushints main.txt two &&
|
|
test_commit three_statushints main.txt three &&
|
|
test_when_finished "git rebase --abort" &&
|
|
ONTO=$(git rev-parse --short HEAD^^) &&
|
|
test_must_fail git rebase --apply HEAD^ --onto HEAD^^ &&
|
|
cat >expected <<EOF &&
|
|
rebase in progress; onto $ONTO
|
|
You are currently rebasing branch '\''statushints_disabled'\'' on '\''$ONTO'\''.
|
|
|
|
Unmerged paths:
|
|
both modified: main.txt
|
|
|
|
no changes added to commit
|
|
EOF
|
|
git status --untracked-files=no >actual &&
|
|
test_cmp expected actual
|
|
'
|
|
|
|
|
|
test_expect_success 'prepare for cherry-pick conflicts' '
|
|
git reset --hard main &&
|
|
git checkout -b cherry_branch &&
|
|
test_commit one_cherry main.txt one &&
|
|
test_commit two_cherries main.txt two &&
|
|
git checkout -b cherry_branch_second &&
|
|
test_commit second_cherry main.txt second &&
|
|
git checkout cherry_branch &&
|
|
test_commit three_cherries main.txt three
|
|
'
|
|
|
|
|
|
test_expect_success 'status when cherry-picking before resolving conflicts' '
|
|
test_when_finished "git cherry-pick --abort" &&
|
|
test_must_fail git cherry-pick cherry_branch_second &&
|
|
TO_CHERRY_PICK=$(git rev-parse --short CHERRY_PICK_HEAD) &&
|
|
cat >expected <<EOF &&
|
|
On branch cherry_branch
|
|
You are currently cherry-picking commit $TO_CHERRY_PICK.
|
|
(fix conflicts and run "git cherry-pick --continue")
|
|
(use "git cherry-pick --skip" to skip this patch)
|
|
(use "git cherry-pick --abort" to cancel the cherry-pick operation)
|
|
|
|
Unmerged paths:
|
|
(use "git add <file>..." to mark resolution)
|
|
both modified: main.txt
|
|
|
|
no changes added to commit (use "git add" and/or "git commit -a")
|
|
EOF
|
|
git status --untracked-files=no >actual &&
|
|
test_cmp expected actual
|
|
'
|
|
|
|
|
|
test_expect_success 'status when cherry-picking after resolving conflicts' '
|
|
git reset --hard cherry_branch &&
|
|
test_when_finished "git cherry-pick --abort" &&
|
|
test_must_fail git cherry-pick cherry_branch_second &&
|
|
TO_CHERRY_PICK=$(git rev-parse --short CHERRY_PICK_HEAD) &&
|
|
echo end >main.txt &&
|
|
git add main.txt &&
|
|
cat >expected <<EOF &&
|
|
On branch cherry_branch
|
|
You are currently cherry-picking commit $TO_CHERRY_PICK.
|
|
(all conflicts fixed: run "git cherry-pick --continue")
|
|
(use "git cherry-pick --skip" to skip this patch)
|
|
(use "git cherry-pick --abort" to cancel the cherry-pick operation)
|
|
|
|
Changes to be committed:
|
|
modified: main.txt
|
|
|
|
Untracked files not listed (use -u option to show untracked files)
|
|
EOF
|
|
git status --untracked-files=no >actual &&
|
|
test_cmp expected actual
|
|
'
|
|
|
|
test_expect_success 'status when cherry-picking multiple commits' '
|
|
git reset --hard cherry_branch &&
|
|
test_when_finished "git cherry-pick --abort" &&
|
|
test_must_fail git cherry-pick cherry_branch_second one_cherry &&
|
|
TO_CHERRY_PICK=$(git rev-parse --short CHERRY_PICK_HEAD) &&
|
|
cat >expected <<EOF &&
|
|
On branch cherry_branch
|
|
You are currently cherry-picking commit $TO_CHERRY_PICK.
|
|
(fix conflicts and run "git cherry-pick --continue")
|
|
(use "git cherry-pick --skip" to skip this patch)
|
|
(use "git cherry-pick --abort" to cancel the cherry-pick operation)
|
|
|
|
Unmerged paths:
|
|
(use "git add <file>..." to mark resolution)
|
|
both modified: main.txt
|
|
|
|
no changes added to commit (use "git add" and/or "git commit -a")
|
|
EOF
|
|
git status --untracked-files=no >actual &&
|
|
test_cmp expected actual
|
|
'
|
|
|
|
test_expect_success 'status when cherry-picking after committing conflict resolution' '
|
|
git reset --hard cherry_branch &&
|
|
test_when_finished "git cherry-pick --abort" &&
|
|
test_must_fail git cherry-pick cherry_branch_second one_cherry &&
|
|
echo end >main.txt &&
|
|
git commit -a &&
|
|
cat >expected <<EOF &&
|
|
On branch cherry_branch
|
|
Cherry-pick currently in progress.
|
|
(run "git cherry-pick --continue" to continue)
|
|
(use "git cherry-pick --skip" to skip this patch)
|
|
(use "git cherry-pick --abort" to cancel the cherry-pick operation)
|
|
|
|
nothing to commit (use -u to show untracked files)
|
|
EOF
|
|
git status --untracked-files=no >actual &&
|
|
test_cmp expected actual
|
|
'
|
|
|
|
test_expect_success 'status shows cherry-pick with invalid oid' '
|
|
mkdir .git/sequencer &&
|
|
test_write_lines "pick invalid-oid" >.git/sequencer/todo &&
|
|
git status --untracked-files=no >actual 2>err &&
|
|
git cherry-pick --quit &&
|
|
test_must_be_empty err &&
|
|
test_cmp expected actual
|
|
'
|
|
|
|
test_expect_success 'status does not show error if .git/sequencer is a file' '
|
|
test_when_finished "rm .git/sequencer" &&
|
|
test_write_lines hello >.git/sequencer &&
|
|
git status --untracked-files=no 2>err &&
|
|
test_must_be_empty err
|
|
'
|
|
|
|
test_expect_success 'status showing detached at and from a tag' '
|
|
test_commit atag tagging &&
|
|
git checkout atag &&
|
|
cat >expected <<\EOF &&
|
|
HEAD detached at atag
|
|
nothing to commit (use -u to show untracked files)
|
|
EOF
|
|
git status --untracked-files=no >actual &&
|
|
test_cmp expected actual &&
|
|
|
|
git reset --hard HEAD^ &&
|
|
cat >expected <<\EOF &&
|
|
HEAD detached from atag
|
|
nothing to commit (use -u to show untracked files)
|
|
EOF
|
|
git status --untracked-files=no >actual &&
|
|
test_cmp expected actual
|
|
'
|
|
|
|
test_expect_success 'status while reverting commit (conflicts)' '
|
|
git checkout main &&
|
|
echo before >to-revert.txt &&
|
|
test_commit before to-revert.txt &&
|
|
echo old >to-revert.txt &&
|
|
test_commit old to-revert.txt &&
|
|
echo new >to-revert.txt &&
|
|
test_commit new to-revert.txt &&
|
|
TO_REVERT=$(git rev-parse --short HEAD^) &&
|
|
test_must_fail git revert $TO_REVERT &&
|
|
cat >expected <<EOF &&
|
|
On branch main
|
|
You are currently reverting commit $TO_REVERT.
|
|
(fix conflicts and run "git revert --continue")
|
|
(use "git revert --skip" to skip this patch)
|
|
(use "git revert --abort" to cancel the revert operation)
|
|
|
|
Unmerged paths:
|
|
(use "git restore --staged <file>..." to unstage)
|
|
(use "git add <file>..." to mark resolution)
|
|
both modified: to-revert.txt
|
|
|
|
no changes added to commit (use "git add" and/or "git commit -a")
|
|
EOF
|
|
git status --untracked-files=no >actual &&
|
|
test_cmp expected actual
|
|
'
|
|
|
|
test_expect_success 'status while reverting commit (conflicts resolved)' '
|
|
echo reverted >to-revert.txt &&
|
|
git add to-revert.txt &&
|
|
cat >expected <<EOF &&
|
|
On branch main
|
|
You are currently reverting commit $TO_REVERT.
|
|
(all conflicts fixed: run "git revert --continue")
|
|
(use "git revert --skip" to skip this patch)
|
|
(use "git revert --abort" to cancel the revert operation)
|
|
|
|
Changes to be committed:
|
|
(use "git restore --staged <file>..." to unstage)
|
|
modified: to-revert.txt
|
|
|
|
Untracked files not listed (use -u option to show untracked files)
|
|
EOF
|
|
git status --untracked-files=no >actual &&
|
|
test_cmp expected actual
|
|
'
|
|
|
|
test_expect_success 'status after reverting commit' '
|
|
git revert --continue &&
|
|
cat >expected <<\EOF &&
|
|
On branch main
|
|
nothing to commit (use -u to show untracked files)
|
|
EOF
|
|
git status --untracked-files=no >actual &&
|
|
test_cmp expected actual
|
|
'
|
|
|
|
test_expect_success 'status while reverting after committing conflict resolution' '
|
|
test_when_finished "git revert --abort" &&
|
|
git reset --hard new &&
|
|
test_must_fail git revert old new &&
|
|
echo reverted >to-revert.txt &&
|
|
git commit -a &&
|
|
cat >expected <<EOF &&
|
|
On branch main
|
|
Revert currently in progress.
|
|
(run "git revert --continue" to continue)
|
|
(use "git revert --skip" to skip this patch)
|
|
(use "git revert --abort" to cancel the revert operation)
|
|
|
|
nothing to commit (use -u to show untracked files)
|
|
EOF
|
|
git status --untracked-files=no >actual &&
|
|
test_cmp expected actual
|
|
'
|
|
|
|
test_expect_success 'prepare for different number of commits rebased' '
|
|
git reset --hard main &&
|
|
git checkout -b several_commits &&
|
|
test_commit one_commit main.txt one &&
|
|
test_commit two_commit main.txt two &&
|
|
test_commit three_commit main.txt three &&
|
|
test_commit four_commit main.txt four
|
|
'
|
|
|
|
test_expect_success 'status: one command done nothing remaining' '
|
|
FAKE_LINES="exec_exit_15" &&
|
|
export FAKE_LINES &&
|
|
test_when_finished "git rebase --abort" &&
|
|
ONTO=$(git rev-parse --short HEAD~3) &&
|
|
test_must_fail git rebase -i HEAD~3 &&
|
|
cat >expected <<EOF &&
|
|
interactive rebase in progress; onto $ONTO
|
|
Last command done (1 command done):
|
|
exec exit 15
|
|
No commands remaining.
|
|
You are currently editing a commit while rebasing branch '\''several_commits'\'' on '\''$ONTO'\''.
|
|
(use "git commit --amend" to amend the current commit)
|
|
(use "git rebase --continue" once you are satisfied with your changes)
|
|
|
|
nothing to commit (use -u to show untracked files)
|
|
EOF
|
|
git status --untracked-files=no >actual &&
|
|
test_cmp expected actual
|
|
'
|
|
|
|
test_expect_success 'status: two commands done with some white lines in done file' '
|
|
FAKE_LINES="1 > exec_exit_15 2 3" &&
|
|
export FAKE_LINES &&
|
|
test_when_finished "git rebase --abort" &&
|
|
ONTO=$(git rev-parse --short HEAD~3) &&
|
|
COMMIT4=$(git rev-parse --short HEAD) &&
|
|
COMMIT3=$(git rev-parse --short HEAD^) &&
|
|
COMMIT2=$(git rev-parse --short HEAD^^) &&
|
|
test_must_fail git rebase -i HEAD~3 &&
|
|
cat >expected <<EOF &&
|
|
interactive rebase in progress; onto $ONTO
|
|
Last commands done (2 commands done):
|
|
pick $COMMIT2 # two_commit
|
|
exec exit 15
|
|
Next commands to do (2 remaining commands):
|
|
pick $COMMIT3 # three_commit
|
|
pick $COMMIT4 # four_commit
|
|
(use "git rebase --edit-todo" to view and edit)
|
|
You are currently editing a commit while rebasing branch '\''several_commits'\'' on '\''$ONTO'\''.
|
|
(use "git commit --amend" to amend the current commit)
|
|
(use "git rebase --continue" once you are satisfied with your changes)
|
|
|
|
nothing to commit (use -u to show untracked files)
|
|
EOF
|
|
git status --untracked-files=no >actual &&
|
|
test_cmp expected actual
|
|
'
|
|
|
|
test_expect_success 'status: two remaining commands with some white lines in todo file' '
|
|
FAKE_LINES="1 2 exec_exit_15 3 > 4" &&
|
|
export FAKE_LINES &&
|
|
test_when_finished "git rebase --abort" &&
|
|
ONTO=$(git rev-parse --short HEAD~4) &&
|
|
COMMIT4=$(git rev-parse --short HEAD) &&
|
|
COMMIT3=$(git rev-parse --short HEAD^) &&
|
|
COMMIT2=$(git rev-parse --short HEAD^^) &&
|
|
test_must_fail git rebase -i HEAD~4 &&
|
|
cat >expected <<EOF &&
|
|
interactive rebase in progress; onto $ONTO
|
|
Last commands done (3 commands done):
|
|
pick $COMMIT2 # two_commit
|
|
exec exit 15
|
|
(see more in file .git/rebase-merge/done)
|
|
Next commands to do (2 remaining commands):
|
|
pick $COMMIT3 # three_commit
|
|
pick $COMMIT4 # four_commit
|
|
(use "git rebase --edit-todo" to view and edit)
|
|
You are currently editing a commit while rebasing branch '\''several_commits'\'' on '\''$ONTO'\''.
|
|
(use "git commit --amend" to amend the current commit)
|
|
(use "git rebase --continue" once you are satisfied with your changes)
|
|
|
|
nothing to commit (use -u to show untracked files)
|
|
EOF
|
|
git status --untracked-files=no >actual &&
|
|
test_cmp expected actual
|
|
'
|
|
|
|
test_expect_success 'status: handle not-yet-started rebase -i gracefully' '
|
|
ONTO=$(git rev-parse --short HEAD^) &&
|
|
COMMIT=$(git rev-parse --short HEAD) &&
|
|
EDITOR="git status --untracked-files=no >actual" git rebase -i HEAD^ &&
|
|
cat >expected <<EOF &&
|
|
On branch several_commits
|
|
No commands done.
|
|
Next command to do (1 remaining command):
|
|
pick $COMMIT # four_commit
|
|
(use "git rebase --edit-todo" to view and edit)
|
|
You are currently editing a commit while rebasing branch '\''several_commits'\'' on '\''$ONTO'\''.
|
|
(use "git commit --amend" to amend the current commit)
|
|
(use "git rebase --continue" once you are satisfied with your changes)
|
|
|
|
nothing to commit (use -u to show untracked files)
|
|
EOF
|
|
test_cmp expected actual
|
|
'
|
|
|
|
test_done
|