Pull mailbox updates from Jassi Brar:
"Platform and core updates
PCC:
- Updates to transmission and interrupt handling, including dynamic
txdone configuration, ->last_tx_done() wiring, and SHMEM
initialization fixes. Reverted previous shared buffer patch
MediaTek
- Introduce mtk-vcp-mailbox driver and bindings for MT8196 VCP
- Expand mtk-cmdq for MT8196 with GCE virtualization, mminfra_offset,
and instruction generation data
Spreadtrum (SPRD)
- Add Mailbox Revision 2 support and UMS9230 bindings
- Fix unhandled interrupt masking and TX done delivery flags
Microchip
- Add pic64gx compatibility to MPFS
- Fix out-of-bounds access and smatch warnings in mchp-ipc-sbi
Core & Misc Platform Updates
- Prevent out-of-bounds access in fw_mbox_index_xlate()
- Add bindings for Qualcomm CPUCP (Kaanapali)
- Simplify mtk-cmdq and zynqmp-ipi with scoped OF child iterators
- Consolidate various minor fixes, dead code removal, and typo
corrections across Broadcom, NXP, Samsung, Xilinx, ARM, and core
headers"
* tag 'mailbox-v6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox: (34 commits)
mailbox: sprd: mask interrupts that are not handled
mailbox: sprd: add support for mailbox revision 2
mailbox: sprd: clear delivery flag before handling TX done
dt-bindings: mailbox: sprd: add compatible for UMS9230
mailbox: bcm-ferxrm-mailbox: Use default primary handler
mailbox: Remove mailbox_client.h from controller drivers
mailbox: zynqmp-ipi: Simplify with scoped for each OF child loop
mailbox: mtk-cmdq: Simplify with scoped for each OF child loop
dt-bindings: mailbox: xlnx,zynqmp-ipi-mailbox: Document msg region requirement
mailbox: Improve RISCV_SBI_MPXY_MBOX guidance
mailbox: mchp-ipc-sbi: fix uninitialized symbol and other smatch warnings
mailbox: arm_mhuv3: fix typo in comment
mailbox: cix: fix typo in error message
mailbox: imx: Skip the suspend flag for i.MX7ULP
mailbox: exynos: drop unneeded runtime pointer (pclk)
mailbox: pcc: Remove spurious IRQF_ONESHOT usage
mailbox: mtk-cmdq: Add driver data to support for MT8196
mailbox: mtk-cmdq: Add mminfra_offset configuration for DRAM transaction
mailbox: mtk-cmdq: Add GCE hardware virtualization configuration
mailbox: mtk-cmdq: Add cmdq private data to cmdq_pkt for generating instruction
...
Pull power management updates from Rafael Wysocki:
"By the number of commits, cpufreq is the leading party (again) and the
most visible change there is the removal of the omap-cpufreq driver
that has not been used for a long time (good riddance). There are also
quite a few changes in the cppc_cpufreq driver, mostly related to
fixing its frequency invariance engine in the case when the CPPC
registers used by it are not in PCC. In addition to that, support for
AM62L3 is added to the ti-cpufreq driver and the cpufreq-dt-platdev
list is updated for some platforms. The remaining cpufreq changes are
assorted fixes and cleanups.
Next up is cpuidle and the changes there are dominated by intel_idle
driver updates, mostly related to the new command line facility
allowing users to adjust the list of C-states used by the driver.
There are also a few updates of cpuidle governors, including two menu
governor fixes and some refinements of the teo governor, and a
MAINTAINERS update adding Christian Loehle as a cpuidle reviewer.
[Thanks for stepping up Christian!]
The most significant update related to system suspend and hibernation
is the one to stop freezing the PM runtime workqueue during system PM
transitions which allows some deadlocks to be avoided. There is also a
fix for possible concurrent bit field updates in the core device
suspend code and a few other minor fixes.
Apart from the above, several drivers are updated to discard the
return value of pm_runtime_put() which is going to be converted to a
void function as soon as everybody stops using its return value, PL4
support for Ice Lake is added to the Intel RAPL power capping driver,
and there are assorted cleanups, documentation fixes, and some
cpupower utility improvements.
Specifics:
- Remove the unused omap-cpufreq driver (Andreas Kemnade)
- Optimize error handling code in cpufreq_boost_trigger_state() and
make cpufreq_boost_trigger_state() return -EOPNOTSUPP if no policy
supports boost (Lifeng Zheng)
- Update cpufreq-dt-platdev list for tegra, qcom, TI (Aaron Kling,
Dhruva Gole, and Konrad Dybcio)
- Minor improvements to the cpufreq and cpumask rust implementation
(Alexandre Courbot, Alice Ryhl, Tamir Duberstein, and Yilin Chen)
- Add support for AM62L3 SoC to the ti-cpufreq driver (Dhruva Gole)
- Update arch_freq_scale in the CPPC cpufreq driver's frequency
invariance engine (FIE) in scheduler ticks if the related CPPC
registers are not in PCC (Jie Zhan)
- Assorted minor cleanups and improvements in ARM cpufreq drivers
(Juan Martinez, Felix Gu, Luca Weiss, and Sergey Shtylyov)
- Add generic helpers for sysfs show/store to cppc_cpufreq (Sumit
Gupta)
- Make the scaling_setspeed cpufreq sysfs attribute return the actual
requested frequency to avoid confusion (Pengjie Zhang)
- Simplify the idle CPU time granularity test in the ondemand cpufreq
governor (Frederic Weisbecker)
- Enable asym capacity in intel_pstate only when CPU SMT is not
possible (Yaxiong Tian)
- Update the description of rate_limit_us default value in cpufreq
documentation (Yaxiong Tian)
- Add a command line option to adjust the C-states table in the
intel_idle driver, remove the 'preferred_cstates' module parameter
from it, add C-states validation to it and clean it up (Artem
Bityutskiy)
- Make the menu cpuidle governor always check the time till the
closest timer event when the scheduler tick has been stopped to
prevent it from mistakenly selecting the deepest available idle
state (Rafael Wysocki)
- Update the teo cpuidle governor to avoid making suboptimal
decisions in certain corner cases and generally improve idle state
selection accuracy (Rafael Wysocki)
- Remove an unlikely() annotation on the early-return condition in
menu_select() that leads to branch misprediction 100% of the time
on systems with only 1 idle state enabled, like ARM64 servers
(Breno Leitao)
- Add Christian Loehle to MAINTAINERS as a cpuidle reviewer
(Christian Loehle)
- Stop flagging the PM runtime workqueue as freezable to avoid system
suspend and resume deadlocks in subsystems that assume asynchronous
runtime PM to work during system-wide PM transitions (Rafael
Wysocki)
- Drop redundant NULL pointer checks before acomp_request_free() from
the hibernation code handling image saving (Rafael Wysocki)
- Update wakeup_sources_walk_start() to handle empty lists of wakeup
sources as appropriate (Samuel Wu)
- Make dev_pm_clear_wake_irq() check the power.wakeirq value under
power.lock to avoid race conditions (Gui-Dong Han)
- Avoid bit field races related to power.work_in_progress in the core
device suspend code (Xuewen Yan)
- Make several drivers discard pm_runtime_put() return value in
preparation for converting that function to a void one (Rafael
Wysocki)
- Add PL4 support for Ice Lake to the Intel RAPL power capping driver
(Daniel Tang)
- Replace sprintf() with sysfs_emit() in power capping sysfs show
functions (Sumeet Pawnikar)
- Make dev_pm_opp_get_level() return value match the documentation
after a previous update of the latter (Aleks Todorov)
- Use scoped for each OF child loop in the OPP code (Krzysztof
Kozlowski)
- Fix a bug in an example code snippet and correct typos in the
energy model management documentation (Patrick Little)
- Fix miscellaneous problems in cpupower (Kaushlendra Kumar):
* idle_monitor: Fix incorrect value logged after stop
* Fix inverted APERF capability check
* Use strcspn() to strip trailing newline
* Reset errno before strtoull()
* Show C0 in idle-info dump
- Improve cpupower installation procedure by making the systemd step
optional and allowing users to disable the installation of
systemd's unit file (João Marcos Costa)"
* tag 'pm-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits)
PM: sleep: core: Avoid bit field races related to work_in_progress
PM: sleep: wakeirq: harden dev_pm_clear_wake_irq() against races
cpufreq: Documentation: Update description of rate_limit_us default value
cpufreq: intel_pstate: Enable asym capacity only when CPU SMT is not possible
PM: wakeup: Handle empty list in wakeup_sources_walk_start()
PM: EM: Documentation: Fix bug in example code snippet
Documentation: Fix typos in energy model documentation
cpuidle: governors: teo: Refine intercepts-based idle state lookup
cpuidle: governors: teo: Adjust the classification of wakeup events
cpufreq: ondemand: Simplify idle cputime granularity test
cpufreq: userspace: make scaling_setspeed return the actual requested frequency
PM: hibernate: Drop NULL pointer checks before acomp_request_free()
cpufreq: CPPC: Add generic helpers for sysfs show/store
cpufreq: scmi: Fix device_node reference leak in scmi_cpu_domain_id()
cpufreq: ti-cpufreq: add support for AM62L3 SoC
cpufreq: dt-platdev: Add ti,am62l3 to blocklist
cpufreq/amd-pstate: Add comment explaining nominal_perf usage for performance policy
cpufreq: scmi: correct SCMI explanation
cpufreq: dt-platdev: Block the driver from probing on more QC platforms
rust: cpumask: rename methods of Cpumask for clarity and consistency
...
Merge ACPI APEI support updates for 6.20-rc1/7.0-rc1:
- Make read-only array non_mmio_desc[] static const (Colin Ian King)
- Prevent the APEI GHES support code on ARM from accessing memory out
of bounds or going past the ARM processor CPER record buffer (Mauro
Carvalho Chehab)
- Prevent cper_print_fw_err() from dumping the entire memory on systems
with defective firmware (Mauro Carvalho Chehab)
- Improve ghes_notify_nmi() status check to avoid unnecessary overhead
in the NMI handler by carrying out all of the requisite preparations
and the NMI registration time (Tony Luck)
- Refactor the GHES driver by extracting common functionality into
reusable helper functions to reduce code duplication and improve
the ghes_notify_sea() status check in analogy with the previous
ghes_notify_nmi() status check improvement (Shuai Xue)
- Make ELOG and GHES log and trace consistently and support the CPER
CXL protocol analogously (Fabio De Francesco)
- Disable KASAN instrumentation in the APEI GHES driver when compile
testing with clang < 18 (Nathan Chancellor)
- Let ghes_edac be the preferred driver to load on __ZX__ and _BYO_
systems by extending the platform detection list in the APEI GHES
driver (Tony W Wang-oc)
* acpi-apei:
ACPI: APEI: GHES: Add ghes_edac support for __ZX__ and _BYO_ systems
ACPI: APEI: GHES: Disable KASAN instrumentation when compile testing with clang < 18
ACPI: extlog: Trace CPER CXL Protocol Error Section
ACPI: APEI: GHES: Add helper to copy CPER CXL protocol error info to work struct
ACPI: APEI: GHES: Add helper for CPER CXL protocol errors checks
ACPI: extlog: Trace CPER PCI Express Error Section
ACPI: extlog: Trace CPER Non-standard Section Body
ACPI: APEI: GHES: Improve ghes_notify_sea() status check
ACPI: APEI: GHES: Extract helper functions for error status handling
ACPI: APEI: GHES: Improve ghes_notify_nmi() status check
EFI/CPER: don't dump the entire memory region
APEI/GHES: ensure that won't go past CPER allocated record
EFI/CPER: don't go past the ARM processor CPER record buffer
APEI/GHES: ARM processor Error: don't go past allocated memory
ACPI: APEI: EINJ: make read-only array non_mmio_desc static const
Merge ACPI processor driver changes for 6.20-rc1/7.0-rc1:
- Rework the ACPI idle driver initialization to register it directly
from the common initialization code instead of doing that from a
CPU hotplug "online" callback and clean it up (Huisong Li, Rafael
Wysocki)
- Fix a possible NULL pointer dereference in
acpi_processor_errata_piix4() (Tuo Li)
* acpi-processor:
ACPI: processor: idle: Rework the handling of acpi_processor_ffh_lpi_probe()
ACPI: processor: idle: Convert acpi_processor_setup_cpuidle_dev() to void
ACPI: processor: idle: Convert acpi_processor_setup_cpuidle_states() to void
ACPI: processor: idle: Add debug log for states with invalid entry methods
ACPI: processor: Fix NULL-pointer dereference in acpi_processor_errata_piix4()
ACPI: processor: Do not expose global variable acpi_idle_driver
ACPI: processor: idle: Rearrange declarations in header file
ACPI: processor: idle: Redefine two functions as void
ACPI: processor: Update cpuidle driver check in __acpi_processor_start()
ACPI: processor: Remove unused empty stubs of some functions
ACPI: processor: idle: Optimize ACPI idle driver registration
Merge ACPICA changes for 6.20-rc1/7.0-rc1:
- Update the ACPICA code in the kernel to upstream version 20251212
which includes the following changes:
* Add support for new ACPI table DTPR (Michal Camacho Romero)
* Release objects with acpi_ut_delete_object_desc() (Zilin Guan)
* Add UUIDs for Microsoft fan extensions and UUIDs associated with
TPM 2.0 devices (Armin Wolf)
* Fix NULL pointer dereference in acpi_ev_address_space_dispatch()
(Alexey Simakov)
* Add KEYP ACPI table definition (Dave Jiang)
* Add support for the Microsoft display mux _OSI string (Armin Wolf)
* Add definitions for the IOVT ACPI table (Xianglai Li)
* Abort AML bytecode execution on AML_FATAL_OP (Armin Wolf)
* Include all fields in subtable type1 for PPTT (Ben Horgan)
* Add GICv5 MADT structures and Arm IORT IWB node definitions (Jose
Marinho)
* Update Parameter Block structure for RAS2 and add a new flag in
Memory Affinity Structure for SRAT (Pawel Chmielewski)
* Add _VDM (Voltage Domain) object (Pawel Chmielewski)
* acpica: (26 commits)
ACPICA: Refactor for TPR Base/Limit registers bitmasks
ACPICA: Replace TPRn Base and Limit registers
ACPICA: Logfile: Changes for version 20251212
ACPICA: Align comments in TPRn-related structures
ACPICA: Cleanup comments and DTPR Table handle functions
ACPICA: Verify DTPR and TPR Instance buffer pointers
ACPICA: Fix Segmentation Fault error related to DTPR
ACPICA: Create auxiliary ACPI_TPR_AUX_SR structure for iASL compiler
ACPICA: ACPI 6.6: Add _VDM (Voltage Domain) object
ACPICA: actbl3.h: ACPI 6.6: SRAT: New flag in Memory Affinity Structure
ACPICA: actbl2.h: ACPI 6.6: RAS2: Update Parameter Block structure
ACPICA: Add Arm IORT IWB node definitions
ACPICA: Add GICv5 MADT structures
ACPICA: Fix asltests using the Fatal() opcode
ACPICA: ACPI 6.4: PPTT: include all fields in subtable type1
ACPICA: Abort AML bytecode execution when executing AML_FATAL_OP
ACPICA: Define DTPR structure related info tables and data template
ACPICA: Add DTPR table support for the ASL compiler
ACPICA: iASL: Add definitions for the IOVT table
ACPICA: Add support for the Microsoft display mux _OSI string
...
Pull CPUFreq Arm updates for 7.0 from Viresh Kumar:
"- Update cpufreq-dt-platdev list for tegra, qcom, TI (Aaron Kling,
Dhruva Gole, and Konrad Dybcio).
- Minor improvements to the cpufreq / cpumask rust implementation
(Alexandre Courbot, Alice Ryhl, Tamir Duberstein, and Yilin Chen).
- Add support for AM62L3 SoC to ti-cpufreq driver (Dhruva Gole).
- Update FIE arch_freq_scale in ticks for non-PCC regs (Jie Zhan).
- Other minor cleanups / improvements (Felix Gu, Juan Martinez, Luca
Weiss, and Sergey Shtylyov)."
* tag 'cpufreq-arm-updates-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: scmi: Fix device_node reference leak in scmi_cpu_domain_id()
cpufreq: ti-cpufreq: add support for AM62L3 SoC
cpufreq: dt-platdev: Add ti,am62l3 to blocklist
cpufreq/amd-pstate: Add comment explaining nominal_perf usage for performance policy
cpufreq: scmi: correct SCMI explanation
cpufreq: dt-platdev: Block the driver from probing on more QC platforms
rust: cpumask: rename methods of Cpumask for clarity and consistency
cpufreq: CPPC: Update FIE arch_freq_scale in ticks for non-PCC regs
cpufreq: CPPC: Factor out cppc_fie_kworker_init()
ACPI: CPPC: Factor out and export per-cpu cppc_perf_ctrs_in_pcc_cpu()
rust: cpufreq: replace `kernel::c_str!` with C-Strings
cpufreq: Add Tegra186 and Tegra194 to cpufreq-dt-platdev blocklist
dt-bindings: cpufreq: qcom-hw: document Milos CPUFREQ Hardware
rust: cpufreq: add __rust_helper to helpers
rust: cpufreq: always inline functions using build_assert with arguments
This reverts commit 5378bdf6a6.
Commit 5378bdf6a6 ("mailbox/pcc: support mailbox management of the shared buffer")
attempted to introduce generic helpers for managing the PCC shared memory,
but it largely duplicates functionality already provided by the mailbox
core and leaves gaps:
1. TX preparation: The mailbox framework already supports this via
->tx_prepare callback for mailbox clients. The patch adds
pcc_write_to_buffer() and expects clients to toggle pchan->chan.manage_writes,
but no drivers set manage_writes, so pcc_write_to_buffer() has no users.
2. RX handling: Data reception is already delivered through
mbox_chan_received_data() and client ->rx_callback. The patch adds an
optional pchan->chan.rx_alloc, which again has no users and duplicates
the existing path.
3. Completion handling: While adding last_tx_done is directionally useful,
the implementation only covers Type 3/4 and fails to handle the absence
of a command_complete register, so it is incomplete for other types.
Given the duplication and incomplete coverage, revert this change. Any new
requirements should be addressed in focused follow-ups rather than bundling
multiple behavioral changes together.
Fixes: 5378bdf6a6 ("mailbox/pcc: support mailbox management of the shared buffer")
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
ghes_notify_nmi() is called for every NMI and must check whether the NMI was
generated because an error was signalled by platform firmware.
This check is very expensive as for each registered GHES NMI source it reads
from the acpi generic address attached to this error source to get the physical
address of the acpi_hest_generic_status block. It then checks the "block_status"
to see if an error was logged.
The ACPI/APEI code must create virtual mappings for each of those physical
addresses, and tear them down afterwards. On an Icelake system this takes around
15,000 TSC cycles. Enough to disturb efforts to profile system performance.
If that were not bad enough, there are some atomic accesses in the code path
that will cause cache line bounces between CPUs. A problem that gets worse as
the core count increases.
But BIOS changes neither the acpi generic address nor the physical address of
the acpi_hest_generic_status block. So this walk can be done once when the NMI is
registered to save the virtual address (unmapping if the NMI is ever unregistered).
The "block_status" can be checked directly in the NMI handler. This can be done
without any atomic accesses.
Resulting time to check that there is not an error record is around 900 cycles.
Reported-by: Andi Kleen <andi.kleen@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://patch.msgid.link/20260112032239.30023-2-xueshuai@linux.alibaba.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Notice that acpi_processor_power_init() and acpi_processor_power_exit()
don't need to return any values because their callers don't check them
anyway, so redefine those functions as void.
While at it, rearrange the code in acpi_processor_power_init() to
reduce the indentation level, get rid of a redundant local variable
in that function, and rephrase a code comment in it.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20251223100914.2407069-5-lihuisong@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Empty stubs are defined in processor.h for some functions provided by
the ACPI processor idle driver, but those functions are only used in
the main ACPI processor driver which requires the ACPI processor idle
driver to be present (selecting CONFIG_ACPI_PROCESSOR causes
CONFIG_ACPI_PROCESSOR_IDLE to be selected too automatically).
This means that the empty stubs in question are not really necessary and
if both CONFIG_ACPI_PROCESSOR and CONFIG_ACPI_PROCESSOR_IDLE are unset,
the compiler complains that they are defined, but not used. Drop them
to get rid of the compiler warning.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20251223100914.2407069-3-lihuisong@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently, the ACPI idle driver is registered from within a CPU
hotplug callback. Although this didn't cause any functional issues,
this is questionable and confusing. And it is better to register
the cpuidle driver when all of the CPUs have been brought up.
So add a new function to initialize acpi_idle_driver based on the
power management information of an available CPU and register cpuidle
driver in acpi_processor_driver_init().
This commit has four changes under the commit 7a8c994cbb (ACPI:
processor: idle: Optimize ACPI idle driver registration):
1) move acpi_processor_register_idle_driver() ahead of the
driver_register().
2) add acpi_processor_cstate_first_run_checks() before calling
acpi_processor_get_power_info().
3) squash the commit 9d68320b2b (ACPI: processor: idle: Fix
function defined but not used warning) into this change.
4) use for_each_possible_cpu(cpu) to scan all possible cpus.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
[ rjw: New comment edits, changelog tweak ]
Link: https://patch.msgid.link/20251223100914.2407069-2-lihuisong@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In ACPI Global System Interrupts (GSIs) are described using a 32-bit
value.
ACPI/PCI legacy interrupts (INTx) parsing code treats GSIs as 'int',
which poses issues if the GSI interrupt value is a 32-bit value with the
MSB set (as required in some interrupt configurations - eg ARM64 GICv5
systems) because acpi_pci_link_allocate_irq() treats a negative gsi
return value as a failed GSI allocation (and acpi_irq_get_penalty()
would trigger an out-of-bounds array dereference if the 'irq' param is
a negative value).
Fix ACPI/PCI legacy INTx parsing by converting variables representing
GSIs from 'int' to 'u32' bringing the code in line with the ACPI
specification and fixing the current parsing issue.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260105101705.36703-1-lpieralisi@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Revert commit 5020d05b34 ("ACPI: processor: Remove unused empty stubs
of some functions") because it depends on a problematic one.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Revert commit bdf780fbce ("ACPI: processor: idle: Rearrange declarations
in header file") because it depends on a problematic one.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Revert commit fbd401e95e ("ACPI: processor: idle: Redefine two
functions as void") because it depends on a problematic one.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Revert commit 559f2eacc8 ACPI: processor: Do not expose global variable
acpi_idle_driver" because it depends on a problematic one.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull more power management updates from Rafael Wysocki:
"These are cpufreq fixes and cleanups on top of the material merged
previously, a power management core code fix and updates of the
runtime PM framework including unit tests, documentation updates and
introduction of auto-cleanup macros for runtime PM "resume and get"
and "get without resuming" operations.
Specifics:
- Make cpufreq drivers setting the default CPU transition latency to
CPUFREQ_ETERNAL specify a proper default transition latency value
instead which addresses a regression introduced during the 6.6
cycle that broke CPUFREQ_ETERNAL handling (Rafael Wysocki)
- Make the cpufreq CPPC driver use a proper transition delay value
when CPUFREQ_ETERNAL is returned by cppc_get_transition_latency()
to indicate an error condition (Rafael Wysocki)
- Make cppc_get_transition_latency() return a negative error code to
indicate error conditions instead of using CPUFREQ_ETERNAL for this
purpose and drop CPUFREQ_ETERNAL that has no other users (Rafael
Wysocki, Gopi Krishna Menon)
- Fix device leak in the mediatek cpufreq driver (Johan Hovold)
- Set target frequency on all CPUs sharing a policy during frequency
updates in the tegra186 cpufreq driver and make it initialize all
cores to max frequencies (Aaron Kling)
- Rust cpufreq helper cleanup (Thorsten Blum)
- Make pm_runtime_put*() family of functions return 1 when the given
device is already suspended which is consistent with the
documentation (Brian Norris)
- Add basic kunit tests for runtime PM API contracts and update
return values in kerneldoc comments for the runtime PM API (Brian
Norris, Dan Carpenter)
- Add auto-cleanup macros for runtime PM "resume and get" and "get
without resume" operations, use one of them in the PCI core and
drop the existing "free" macro introduced for similar purpose, but
somewhat cumbersome to use (Rafael Wysocki)
- Make the core power management code avoid waiting on device links
marked as SYNC_STATE_ONLY which is consistent with the handling of
those device links elsewhere (Pin-yen Lin)"
* tag 'pm-6.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
docs/zh_CN: Fix malformed table
docs/zh_TW: Fix malformed table
PM: runtime: Fix error checking for kunit_device_register()
PM: runtime: Introduce one more usage counter guard
cpufreq: Drop unused symbol CPUFREQ_ETERNAL
ACPI: CPPC: Do not use CPUFREQ_ETERNAL as an error value
cpufreq: CPPC: Avoid using CPUFREQ_ETERNAL as transition delay
cpufreq: Make drivers using CPUFREQ_ETERNAL specify transition latency
PM: runtime: Drop DEFINE_FREE() for pm_runtime_put()
PCI/sysfs: Use runtime PM guard macro for auto-cleanup
PM: runtime: Add auto-cleanup macros for "resume and get" operations
cpufreq: tegra186: Initialize all cores to max frequencies
cpufreq: tegra186: Set target frequency for all cpus in policy
rust: cpufreq: streamline find_supply_names
cpufreq: mediatek: fix device leak on probe failure
PM: sleep: Do not wait on SYNC_STATE_ONLY device links
PM: runtime: Update kerneldoc return codes
PM: runtime: Make put{,_sync}() return 1 when already suspended
PM: runtime: Add basic kunit tests for API contracts
Pull CXL updates from Dave Jiang:
"The changes include adding poison injection support, fixing CXL access
coordinates when onlining CXL memory, and delaing the enumeration of
downstream switch ports for CXL hierarchy to ensure that the CXL link
is established at the time of enumeration to address a few issues
observed on AMD and Intel platforms.
Misc changes:
- Use str_plural() instead of open code for emitting strings.
- Use str_enabled_disabled() instead of ternary operator
- Fix emit of type resource_size_t argument for
validate_region_offset()
- Typo fixup in CXL driver-api documentation
- Rename CFMWS coherency restriction defines
- Add convention doc describe dealing with x86 low memory hole
and CXL
Poison Inject support:
- Move hpa_to_spa callback to new reoot decoder ops structure
- Define a SPA to HPA callback for interleave calculation with
XOR math
- Add support for SPA to DPA address translation with XOR
- Add locked variants of poison inject and clear functions
- Add inject and clear poison support by region offset
CXL access coordinates update fix:
- A comment update for hotplug memory callback prority defines
- Add node_update_perf_attrs() for updating perf attrs on a node
- Update cxl_access_coordinates() to use the new node update function
- Remove hmat_update_target_coordinates() and related code
CXL delayed downstream port enumeration and initialization:
- Add helper to detect top of CXL device topology and remove
open coding
- Add helper to delete single dport
- Add a cached copy of target_map to cxl_decoder
- Refactor decoder setup to reduce cxl_test burden
- Defer dport allocation for switch ports
- Add mock version of devm_cxl_add_dport_by_dev() for cxl_test
- Adjust the mock version of devm_cxl_switch_port_decoders_setup()
due to cxl core usage
- Setup target_map for cxl_test decoder initialization
- Change SSLBIS handler to handle single dport
- Move port register setup to when first dport appears"
* tag 'cxl-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (25 commits)
cxl: Move port register setup to when first dport appear
cxl: Change sslbis handler to only handle single dport
cxl/test: Setup target_map for cxl_test decoder initialization
cxl/test: Adjust the mock version of devm_cxl_switch_port_decoders_setup()
cxl/test: Add mock version of devm_cxl_add_dport_by_dev()
cxl: Defer dport allocation for switch ports
cxl/test: Refactor decoder setup to reduce cxl_test burden
cxl: Add a cached copy of target_map to cxl_decoder
cxl: Add helper to delete dport
cxl: Add helper to detect top of CXL device topology
cxl: Documentation/driver-api/cxl: Describe the x86 Low Memory Hole solution
cxl/acpi: Rename CFMW coherency restrictions
Documentation/driver-api: Fix typo error in cxl
acpi/hmat: Remove now unused hmat_update_target_coordinates()
cxl, acpi/hmat: Update CXL access coordinates directly instead of through HMAT
drivers/base/node: Add a helper function node_update_perf_attrs()
mm/memory_hotplug: Update comment for hotplug memory callback priorities
cxl: Fix emit of type resource_size_t argument for validate_region_offset()
cxl/region: Add inject and clear poison by region offset
cxl/core: Add locked variants of the poison inject and clear funcs
...
Instead of using CPUFREQ_ETERNAL for signaling an error condition
in cppc_get_transition_latency(), change the return value type of
that function to int and make it return a proper negative error
code on failures.
No intentional functional impact.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Jie Zhan <zhanjie9@hisilicon.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Qais Yousef <qyousef@layalina.io>
Merge an ACPI device enumeration update, ACPI processor driver updates,
and an ACPI sysfs-related code update for 6.18-rc1:
- Add Intel CVS ACPI HIDs to acpi_ignore_dep_ids[] so it is not
regarded as real dependency (Hans de Goede)
- Use ACPI_FREE() for freeing an ACPI object in description_show() in
the ACPI sysfs-related code (Kaushlendra Kumar)
- Fix memory leak in the ACPI processor idle driver registration error
code path and optimize ACPI idle driver registration (Huisong Li,
Rafael Wysocki)
- Add module import namespace to the ACPI processor idle driver (Rafael
Wysocki)
- Eliminate static variable flat_state_cnt from the ACPI processor idle
driver (Rafael Wysocki)
- Release cpufreq policy references using __free() in the ACPI
processor thremal driver (Zihuan Zhang)
- Remove unused empty stubs of some functions and rearrange function
declarations in a header file in the ACPI processor driver (Huisong
Li)
- Redefine two functions as void in the ACPI processor driver (Rafael
Wysocki)
- Do not expose global variable acpi_idle_driver in the ACPI processor
driver (Huisong Li)
* acpi-scan:
ACPI: scan: Add Intel CVS ACPI HIDs to acpi_ignore_dep_ids[]
* acpi-processor:
ACPI: processor: Do not expose global variable acpi_idle_driver
ACPI: processor: idle: Redefine two functions as void
ACPI: processor: Update cpuidle driver check in __acpi_processor_start()
ACPI: processor: idle: Rearrange declarations in header file
ACPI: processor: Remove unused empty stubs of some functions
ACPI: processor: thermal: Release policy references using __free()
ACPI: processor: idle: Fix function defined but not used warning
ACPI: processor: idle: Eliminate static variable flat_state_cnt
ACPI: processor: idle: Add module import namespace
ACPI: processor: idle: Optimize ACPI idle driver registration
ACPI: processor: idle: Fix memory leak when register cpuidle device failed
* acpi-sysfs:
ACPI: sysfs: Use ACPI_FREE() for freeing an ACPI object
Notice that acpi_processor_power_init() and acpi_processor_power_exit()
don't need to return any values because their callers don't check them
anyway, so redefine those functions as void.
While at it, rearrange the code in acpi_processor_power_init() to
reduce the indentation level, get rid of a redundant local variable
in that function, and rephrase a code comment in it.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
