When bnxt_init_one() fails during initialization (e.g.,
bnxt_init_int_mode returns -ENODEV), the error path calls
bnxt_free_hwrm_resources() which destroys the DMA pool and sets
bp->hwrm_dma_pool to NULL. Subsequently, bnxt_ptp_clear() is called,
which invokes ptp_clock_unregister().
Since commit a60fc3294a ("ptp: rework ptp_clock_unregister() to
disable events"), ptp_clock_unregister() now calls
ptp_disable_all_events(), which in turn invokes the driver's .enable()
callback (bnxt_ptp_enable()) to disable PTP events before completing the
unregistration.
bnxt_ptp_enable() attempts to send HWRM commands via bnxt_ptp_cfg_pin()
and bnxt_ptp_cfg_event(), both of which call hwrm_req_init(). This
function tries to allocate from bp->hwrm_dma_pool, causing a NULL
pointer dereference:
bnxt_en 0000:01:00.0 (unnamed net_device) (uninitialized): bnxt_init_int_mode err: ffffffed
KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
Call Trace:
__hwrm_req_init (drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c:72)
bnxt_ptp_enable (drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:323 drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:517)
ptp_disable_all_events (drivers/ptp/ptp_chardev.c:66)
ptp_clock_unregister (drivers/ptp/ptp_clock.c:518)
bnxt_ptp_clear (drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:1134)
bnxt_init_one (drivers/net/ethernet/broadcom/bnxt/bnxt.c:16889)
Lines are against commit f8f9c1f4d0 ("Linux 6.19-rc3")
Fix this by clearing and unregistering ptp (bnxt_ptp_clear()) before
freeing HWRM resources.
Suggested-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Fixes: a60fc3294a ("ptp: rework ptp_clock_unregister() to disable events")
Cc: stable@vger.kernel.org
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20260106-bnxt-v3-1-71f37e11446a@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rafael J. Wysocki says:
====================
net: Discard pm_runtime_put() return value
This is mostly was a resend of patches [10-12/23] from:
https://lore.kernel.org/linux-pm/6245770.lOV4Wx5bFT@rafael.j.wysocki/
as requested by Jakub, except for the last patch that has been fixed
while at it and so the version has been bumped up.
The patches are independent of each other and they are all requisite
for converting pm_runtime_put() into a void function.
====================
Link: https://patch.msgid.link/2816529.mvXUDI8C0e@rafael.j.wysocki
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The framer driver defines framer_pm_runtime_put() to return an int,
but that return value is never used. It also passes the return value
of pm_runtime_put() to the caller which is not very useful.
Returning an error code from pm_runtime_put() merely means that it has
not queued up a work item to check whether or not the device can be
suspended and there are many perfectly valid situations in which that
can happen, like after writing "on" to the devices' runtime PM "control"
attribute in sysfs for one example.
Modify phy_pm_runtime_put() to discard the pm_runtime_put() return
value and change its return type to void.
No intentional functional impact.
This will facilitate a planned change of the pm_runtime_put() return
type to void in the future.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3027916.e9J7NaK4W3@rafael.j.wysocki
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Passing pm_runtime_put() return value to the callers is not particularly
useful.
Returning an error code from pm_runtime_put() merely means that it has
not queued up a work item to check whether or not the device can be
suspended and there are many perfectly valid situations in which that
can happen, like after writing "on" to the devices' runtime PM "control"
attribute in sysfs for one example. It also happens when the kernel is
configured with CONFIG_PM unset.
Accordingly, update at91ether_close() to simply discard the return
value of pm_runtime_put() and always return success to the caller.
This will facilitate a planned change of the pm_runtime_put() return
type to void in the future.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://patch.msgid.link/2252292.irdbgypaU6@rafael.j.wysocki
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Printing error messages on pm_runtime_put() returning negative values
is not particularly useful.
Returning an error code from pm_runtime_put() merely means that it has
not queued up a work item to check whether or not the device can be
suspended and there are many perfectly valid situations in which that
can happen, like after writing "on" to the devices' runtime PM "control"
attribute in sysfs for one example.
Accordingly, update am65_cpsw_ethtool_op_begin() and cpsw_ethtool_op_begin()
to simply discard the return value of pm_runtime_put().
This will facilitate a planned change of the pm_runtime_put() return
type to void in the future.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/5042490.GXAFRqVoOG@rafael.j.wysocki
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull HID fixes from Jiri Kosina:
- build fix for HID-BPF (Benjamin Tissoires)
- fix for potential buffer overflow in i2c-hid (Kwok Kin Ming)
- a couple of selftests/hid fixes (Peter Hutterer)
- fix for handling pressure pads in hid-multitouch (Peter Hutterer)
- fix for potential NULL pointer dereference in intel-thc-hid (Even Xu)
- fix for interrupt delay control in intel-thc-hid (Even Xu)
- fix finger release detection on some VTL-class touchpads (DaytonCL)
- fix for correct enumeration on intel-ish-hid systems with no sensors
(Zhang Lixu)
- assorted device ID additions and device-specific quirks
* tag 'hid-for-linus-2026010801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (21 commits)
HID: logitech: add HID++ support for Logitech MX Anywhere 3S
HID: Elecom: Add support for ELECOM M-XT3DRBK (018C)
HID: quirks: work around VID/PID conflict for appledisplay
HID: Apply quirk HID_QUIRK_ALWAYS_POLL to Edifier QR30 (2d99:a101)
HID: i2c-hid: fix potential buffer overflow in i2c_hid_get_report()
selftests/hid: add a test for the Digitizer/Button Type pressurepad
selftests/hid: use a enum class for the different button types
selftests/hid: require hidtools 0.12
HID: multitouch: set INPUT_PROP_PRESSUREPAD based on Digitizer/Button Type
HID: quirks: Add another Chicony HP 5MP Cameras to hid_ignore_list
HID: Intel-thc-hid: Intel-thc: Add safety check for reading DMA buffer
hid: intel-thc-hid: Select SGL_ALLOC
selftests/hid: fix bpf compilations due to -fms-extensions
HID: bpf: fix bpf compilation with -fms-extensions
HID: Intel-thc-hid: Intel-thc: Fix wrong register reading
HID: multitouch: add MT_QUIRK_STICKY_FINGERS to MT_CLS_VTL
HID: intel-ish-hid: Reset enum_devices_done before enumeration
HID: intel-ish-hid: Update ishtp bus match to support device ID table
HID: Intel-thc-hid: Intel-thc: fix dma_unmap_sg() nents value
HID: playstation: Center initial joystick axes to prevent spurious events
...
Pull sound fixes from Takashi Iwai:
"A collection of small device-specific fixes:
- ASoC Intel topology fixes for conflicting Bluetooth bits
- Cleanups of ASoC drivers for superfluous NULL checks
- Fix for error handling in the AC97 bus
- A regression fix for TAS2781 speaker ID handling
- HD-audio quirks"
* tag 'sound-6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: add HP Laptop 15s-eq1xxx mute LED quirk
ALSA: hda/realtek: Add quirk for Acer Nitro AN517-55
ALSA: hda/tas2781: properly initialize speaker_id for TAS2563
ALSA: ac97: fix a double free in snd_ac97_controller_register()
ASoC: sun4i-spdif: Add missing kerneldoc fields for sun4i_spdif_quirks
ASoC: codecs: pm4125: clean up bind() device reference handling
ASoC: soc_sdw_utils: drop bogus container_of() error handling
ASoC: codecs: wcd937x: drop bogus container_of() error handling
ASoC: codecs: pm4125: drop bogus container_of() error handling
ASoC: SOF: Intel: add -bt tplg suffix if BT is present
ASoC: Intel: sof_sdw: shift SSP BT mask bits.
The interface specific workqueues are allocated with the interface name
as part of the workqueue name. However when they are allocated, the
interface name has not been allocated, thus the "name" is actually the
pattern for the name "mlan%d". This ends up pretty ugly and could
conflict if multiple interfaces were added.
Allocate the device name earlier and use that to allocate the
workqueues. Also tweak the workqueue name patterns to add a separator
between the prefix and the interface name parts for readability.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20260107092744.1131314-1-wenst@chromium.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Userspace may fail to connect to certain BSS that were initially
marked as unusable due to regulatory restrictions (use_for = 0,
e.g., 6 GHz power type mismatch). Even after these restrictions
are removed and the BSS becomes usable, connection attempts still
fail.
The issue occurs in cfg80211_update_known_bss() where the use_for
flag is updated using bitwise AND (&=) instead of direct assignment.
Once a BSS is marked with use_for = 0, the AND operation masks out
any subsequent non-zero values, permanently keeping the flag at 0.
This causes __cfg80211_get_bss(), invoked by nl80211_assoc_bss(), to
fail the check "(bss->pub.use_for & use_for) != use_for", thereby
blocking association.
Replace the bitwise AND operation with direct assignment so the use_for
flag accurately reflects the current BSS state.
Fixes: d02a12b8e4 ("wifi: cfg80211: add BSS usage reporting")
Signed-off-by: Huang Chenming <chenming.huang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251209025733.2098456-1-chenming.huang@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Correct or add kernel-doc comments for:
- an enum name typo
- missing struct member comments in struct vif_saved_ie and
struct brcmf_cfg80211_vif
fixing these warnings:
Warning: drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h:195
Enum value 'BRCMF_VIF_STATUS_EAP_SUCCESS' not described in enum
'brcmf_vif_status'
Warning: drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h:195
Excess enum value '@BRCMF_VIF_STATUS_EAP_SUCCUSS' description in
'brcmf_vif_status'
Warning: drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h:220
struct member 'assoc_req_ie' not described in 'vif_saved_ie'
Warning: drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h:220
struct member 'assoc_req_ie_len' not described in 'vif_saved_ie'
Warning: drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h:255
struct member 'saved_ie' not described in 'brcmf_cfg80211_vif'
Warning: drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h:255
struct member 'is_11d' not described in 'brcmf_cfg80211_vif'
kernel-doc warnings for missing struct member descriptions in struct
brcmf_cfg80211_info and struct brcmf_cfg80211_profile are still present.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20251129073803.1814384-1-rdunlap@infradead.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Daniel Golle says:
====================
net: phy: realtek: various improvements for 2.5GE PHYs
This series improves the RealTek PHY driver, mostly for 2.5GE PHYs.
It implements configuring SGMII and 2500Base-X in-band auto-negotiation
and improves using the PHYs in Clause-22-only mode.
Note that the rtl822x_serdes_write() function introduced by this series
is going to be reused to configure polarities of SerDes RX and TX lanes
once series "PHY polarity inversion via generic device tree properties"
has been applied.
Access to other registers on MDIO_MMD_VEND2 is important for more than
just configuring autonegotiation, it is also used to setup ALDPS or to
disable the PHY responding to the MDIO broadcast address 0. Both will be
implemented by follow-up patches.
The address translation function for registers on MDIO_MMD_VEND2 into
paged registers can potentially also be used to describe other paged
access in a more consistent way, but that mostly makes sense on PHYs
which also support Clause-45, so this series doesn't convert all the
existing paged access on RealTek's 1GE PHYs which do not support
Clause-45.
====================
Link: https://patch.msgid.link/cover.1767630451.git.daniel@makrotopia.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, whenever cfg80211_stop_iface() is called, the entire iface
is stopped. However, there could be a need in AP/P2P_GO mode, where
one would like to stop a single link in MLO operation instead of the
whole MLD interface.
Hence, introduce cfg80211_stop_link() to allow drivers to tear down
only a specified AP/P2P_GO link during MLO operation. Passing -1
preserves the existing behavior of stopping the whole interface. Make
cfg80211_stop_iface() call this function by passing -1 to keep the
default behavior the same, that is, to stop all links and use
cfg80211_stop_link() with the desired link_id for AP/P2P_GO mode, to
stop only that link.
This brings no behavioral change for single-link/non-MLO interfaces,
and enables drivers to stop an AP/P2P_GO link without disrupting other
links on the same interface.
Signed-off-by: Manish Dharanenthiran <manish.dharanenthiran@oss.qualcomm.com>
Link: https://patch.msgid.link/20251127-stop_link-v2-1-43745846c5fd@qti.qualcomm.com
[make cfg80211_stop_iface() inline]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Bastien Curutchet says:
====================
net: dsa: microchip: Adjust PTP handling to ease KSZ8463 integration
This series aims to make the PTP handling a bit more generic to ease the
addition of PTP support for the KSZ8463 in an upcoming series. It is not
intented to change any behaviour in the driver here.
Patches 1 & 2 focus on IRQ handling.
Patches 3 to 9 focus on register access.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
====================
Link: https://patch.msgid.link/20260105-ksz-rework-v1-0-a68df7f57375@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Timestamps are directly accessed through a register read in the
interrupt handler. KSZ8463's logic to access it will be a bit more
complex because the same interrupt can be triggered by two different
timestamps being ready.
Wrap the timestamp's reading in a dedicated function to ease the
KSZ8463's integration in upcoming patches.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260105-ksz-rework-v1-9-a68df7f57375@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Accesses to the PTP_MSG_CONF1 register are done through a hardcoded
address which doesn't match with the KSZ8463's register layout.
Add a new entry for the PTP_MSG_CONF1 register in the regs[] tables.
Use the regs[] table to retrieve the PTP_MSG_CONF1 register address
when accessing it.
Remove the macro defining the address to prevent further use.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260105-ksz-rework-v1-8-a68df7f57375@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Accesses to the PTP_SUBNANOSEC_RATE register are done through a
hardcoded address which doesn't match with the KSZ8463's register
layout.
Add a new entry for the PTP_SUBNANOSEC_RATE register in the regs[]
tables.
Use the regs[] table to retrieve the PTP_SUBNANOSEC_RATE register
address when accessing it.
Remove the macro defining the address to prevent further use.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260105-ksz-rework-v1-7-a68df7f57375@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Accesses to the PTP_RTC_SUB_NANOSEC register are done through a
hardcoded address which doesn't match with the KSZ8463's register
layout.
Add a new entry for the PTP_RTC_SUB_NANOSEC register in the regs[]
tables.
Use the regs[] table to retrieve the PTP_RTC_SUB_NANOSEC register
address when accessing it.
Remove the macro defining the address to prevent further use.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260105-ksz-rework-v1-6-a68df7f57375@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Accesses to the PTP_RTC_SEC register are done through a hardcoded
address which doesn't match with the KSZ8463's register layout.
Add a new entry for the PTP_RTC_SEC register in the regs[] tables.
Use the regs[] table to retrieve the PTP_RTC_SEC register address
when accessing it.
Remove the macro defining the address to prevent further use.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260105-ksz-rework-v1-5-a68df7f57375@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Accesses to the PTP_RTC_NANOSEC register are done through a hardcoded
address which doesn't match with the KSZ8463's register layout.
Add a new entry for the PTP_RTC_NANOSEC register in the regs[] tables.
Use the regs[] table to retrieve the PTP_RTC_NANOSEC register address
when accessing it.
Remove the macro defining the address to prevent further use.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260105-ksz-rework-v1-4-a68df7f57375@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Accesses to the PTP_CLK_CTRL register are done through a hardcoded
address which doesn't match with the KSZ8463's register layout.
Add a new entry for the PTP_CLK_CTRL register in the regs[] tables.
Use the regs[] table to retrieve the PTP_CLK_CTRL register address
when accessing it.
Remove the macro defining the address to prevent further use.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260105-ksz-rework-v1-3-a68df7f57375@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The IRQ logic of the KSZ8463 differs from that of other KSZ switches.
It doesn't have a 'mask' register but an 'enable' one instead. The
common IRQ framework can still be used though as soon as we reverse
the logic (using '1' to enable interrupts instead of '0') for KSZ8463
cases.
Move the initialization of the kirq->masked outside of
ksz_irq_common_setup() to keep this function truly common when
IRQ support for the KSZ8463 is added.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260105-ksz-rework-v1-1-a68df7f57375@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
I've acquired a Logitech MX Anywhere 3S mouse, which supports HID++ over
Bluetooth. Adding its PID 0xb037 to the allowlist enables the additional
features, such as high-resolution scrolling. Tested working across multiple
machines, with a mix of Intel and Mediatek Bluetooth chips.
[jkosina@suse.com: standardize shortlog]
Signed-off-by: Dennis Marttinen <twelho@welho.tech>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
airoha_ppe_deinit() runs airoha_npu_ppe_deinit() in atomic context.
airoha_npu_ppe_deinit routine allocates ppe_data buffer with GFP_KERNEL
flag. Rely on rcu_replace_pointer in airoha_ppe_deinit routine in order
to fix schedule while atomic issue in airoha_npu_ppe_deinit() since we
do not need atomic context there.
Fixes: 00a7678310 ("net: airoha: Introduce flowtable offload support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260105-airoha-fw-ethtool-v2-1-3b32b158cc31@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For years I wondered why the Apple Cinema Display driver would not
just work for me. Turns out the hidraw driver instantly takes it
over. Fix by adding appledisplay VID/PIDs to hid_have_special_driver.
Fixes: 069e8a65cd ("Driver for Apple Cinema Display")
Signed-off-by: René Rebe <rene@exactco.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The USB speaker has a bug that causes it to reboot when changing the
brightness using the physical knob.
Add a new vendor and product ID entry in hid-ids.h, and register
the corresponding device in hid-quirks.c with the required quirk.
Signed-off-by: Rodrigo Lugathe da Conceição Alves <lugathe2@gmail.com>
Reviewed-by: Terry Junge <linuxhid@cosmicgizmosystems.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
`i2c_hid_xfer` is used to read `recv_len + sizeof(__le16)` bytes of data
into `ihid->rawbuf`.
The former can come from the userspace in the hidraw driver and is only
bounded by HID_MAX_BUFFER_SIZE(16384) by default (unless we also set
`max_buffer_size` field of `struct hid_ll_driver` which we do not).
The latter has size determined at runtime by the maximum size of
different report types you could receive on any particular device and
can be a much smaller value.
Fix this by truncating `recv_len` to `ihid->bufsize - sizeof(__le16)`.
The impact is low since access to hidraw devices requires root.
Signed-off-by: Kwok Kin Ming <kenkinming2002@gmail.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
We have to resort to a bit of a hack: python-libevdev gets the
properties from libevdev at module init time. If libevdev hasn't been
rebuilt with the new property it won't be automatically populated. So we
hack around this by constructing the property manually.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Not all our tests really require it but since it's likely pip-installed
anyway it's trivial to require the new version, just in case we want to
start cleaning up other bits.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Breno Leitao
Petko Manolov
Thomas Fourier
Xiang Mei
Jakub Kicinski
Rafael J. Wysocki
Linus Torvalds
Szymon Wilczek
Chen-Yu Tsai
Baochen Qiang
Johannes Berg
Benjamin Berg
Miri Korenblit
Eric Dumazet
Uwe Kleine-König
Huang Chenming
Rafał Miłecki
Randy Dunlap
Paolo Abeni
Daniel Golle
Aditya Kumar Singh
Manish Dharanenthiran
Bastien Curutchet (Schneider Electric)
Dennis Marttinen
Lorenzo Bianconi
Arnoud Willemsen
René Rebe
Rodrigo Lugathe da Conceição Alves
Kwok Kin Ming
Peter Hutterer