[ Upstream commit 44295af501 ]
cpufreq_verify_current_freq checks() if the frequency returned by
the hardware has a slight delta with the valid frequency value
last set and returns "policy->cur" if the delta is within "1 MHz".
In the comparison, "policy->cur" is in "kHz" but it's compared
against HZ_PER_MHZ. So, the comparison range becomes "1 GHz".
Fix this by comparing against KHZ_PER_MHZ instead of HZ_PER_MHZ.
Fixes: f55ae08c89 ("cpufreq: Avoid unnecessary frequency updates due to mismatch")
Signed-off-by: Sanjay Chandrashekara <sanjayc@nvidia.com>
[ sumit gupta: Commit message update ]
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2b47e5859 ]
The OSM/EPSS hardware controls the frequency of each CPU cluster based
on requests from the OS and various throttling events in the system.
While throttling is in effect the related dcvs interrupt will be kept
high. The purpose of the code handling this interrupt is to
continuously report the thermal pressure based on the throttled
frequency.
The reasoning for adding QoS control to this mechanism is not entirely
clear, but the introduction of commit 'c4c0efb06f17 ("cpufreq:
qcom-cpufreq-hw: Add cpufreq qos for LMh")' causes the
scaling_max_frequncy to be set to the throttled frequency. On the next
iteration of polling, the throttled frequency is above or equal to the
newly requested frequency, so the polling is stopped.
With cpufreq limiting the max frequency, the hardware no longer report a
throttling state and no further updates to thermal pressure or qos
state are made.
The result of this is that scaling_max_frequency can only go down, and
the system becomes slower and slower every time a thermal throttling
event is reported by the hardware.
Even if the logic could be improved, there is no reason for software to
limit the max freqency in response to the hardware limiting the max
frequency. At best software will follow the reported hardware state, but
typically it will cause slower backoff of the throttling.
This reverts commit c4c0efb06f.
Fixes: c4c0efb06f ("cpufreq: qcom-cpufreq-hw: Add cpufreq qos for LMh")
Reported-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0883426fd0 ]
During the addition of SRAM voltage tracking for CCI scaling, this
driver got some voltage limits set for the vtrack algorithm: these
were moved to platform data first, then enforced in a later commit
6a17b3876b ("cpufreq: mediatek: Refine mtk_cpufreq_voltage_tracking()")
using these as max values for the regulator_set_voltage() calls.
In this case, the vsram/vproc constraints for MT7622 and MT7623
were supposed to be the same as MT2701 (and a number of other SoCs),
but that turned out to be a mistake because the aforementioned two
SoCs' maximum voltage for both VPROC and VPROC_SRAM is 1.36V.
Fix that by adding new platform data for MT7622/7623 declaring the
right {proc,sram}_max_volt parameter.
Fixes: ead858bd12 ("cpufreq: mediatek: Move voltage limits to platform data")
Fixes: 6a17b3876b ("cpufreq: mediatek: Refine mtk_cpufreq_voltage_tracking()")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jia-Wei Chang <jia-wei.chang@mediatek.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d3296bb4ca ]
Since the upper boundary of proc/sram voltage of MT8516 is 1300 mV,
which is greater than the value of MT2701 1150 mV, we fix it by adding
the corresponding platform data and specify proc/sram_max_volt to
support MT8516.
Signed-off-by: Jia-Wei Chang <jia-wei.chang@mediatek.com>
Fixes: ead858bd12 ("cpufreq: mediatek: Move voltage limits to platform data")
Fixes: 6a17b3876b ("cpufreq: mediatek: Refine mtk_cpufreq_voltage_tracking()")
Reported-by: Nick Hainke <vincent@systemli.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d51e106240 ]
Any kind of failure in mtk_cpu_dvfs_info_init() will lead to calling
regulator_put() or clk_put() and the KP will occur since the regulator/clk
handlers are used after released in mtk_cpu_dvfs_info_release().
To prevent the usage after regulator_put()/clk_put(), the regulator/clk
handlers are addressed in a way of "Free the Last Thing Style".
Signed-off-by: Jia-Wei Chang <jia-wei.chang@mediatek.com>
Fixes: 4b9ceb757b ("cpufreq: mediatek: Enable clocks and regulators")
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Suggested-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5d8f384a9b ]
The remove function first frees the clks and only then calls
cpufreq_unregister_driver(). If one of the cpufreq callbacks is called
just before cpufreq_unregister_driver() is run, the freed clks might be
used.
Fixes: 6601b8030d ("davinci: add generic CPUFreq driver for DaVinci")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 51be2fffd6 ]
On a sc7180-based Chromebook, when I go to
/sys/devices/system/cpu/cpu0/cpufreq I can see:
cpuinfo_cur_freq:2995200
cpuinfo_max_freq:1804800
scaling_available_frequencies:300000 576000 ... 1708800 1804800
scaling_cur_freq:1804800
scaling_max_freq:1804800
As you can see the `cpuinfo_cur_freq` is bogus. It turns out that this
bogus info started showing up as of commit c72cf0cb1d ("cpufreq:
qcom-hw: Fix the frequency returned by cpufreq_driver->get()"). That
commit seems to assume that everyone is on the LMH bandwagon, but
sc7180 isn't.
Let's go back to the old code in the case where LMH isn't used.
Fixes: c72cf0cb1d ("cpufreq: qcom-hw: Fix the frequency returned by cpufreq_driver->get()")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
[ Viresh: Fixed the 'fixes' tag ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 08f0adb193 ]
Use NULL for NULL pointer to fix the following sparse warning:
drivers/cpufreq/armada-37xx-cpufreq.c:448:32: sparse: warning: Using plain integer as NULL pointer
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit faf28e240d ]
The Qualcomm SM6375 platform uses the qcom-cpufreq-hw driver, so add
it to the cpufreq-dt-platdev driver's blocklist.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01c5bb0cc2 ]
Tegra234 platform uses the tegra194-cpufreq driver, so add it
to the blocklist in cpufreq-dt-platdev driver to avoid the cpufreq
driver registration from there.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f5f94b9c8b ]
The fields of the _CPC object are unsigned 32-bits values.
To avoid overflows while using _CPC's values, add 'u64' casts.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4f3085f87b upstream.
In the amd_pstate_adjust_perf(), there is one cpufreq_cpu_get() call to
increase increments the kobject reference count of policy and make it as
busy. Therefore, a corresponding call to cpufreq_cpu_put() is needed to
decrement the kobject reference count back, it will resolve the kernel
hang issue when unregistering the amd-pstate driver and register the
`amd_pstate_epp` driver instance.
Fixes: 1d215f0319 ("cpufreq: amd-pstate: Add fast switch function for AMD P-State")
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Cc: 5.17+ <stable@vger.kernel.org> # 5.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5c51054896 upstream.
In cpufreq_policy_alloc(), it will call uninitialed completion in
cpufreq_sysfs_release() when kobject_init_and_add() fails. And
that will cause a crash such as the following page fault in complete:
BUG: unable to handle page fault for address: fffffffffffffff8
[..]
RIP: 0010:complete+0x98/0x1f0
[..]
Call Trace:
kobject_put+0x1be/0x4c0
cpufreq_online.cold+0xee/0x1fd
cpufreq_add_dev+0x183/0x1e0
subsys_interface_register+0x3f5/0x4e0
cpufreq_register_driver+0x3b7/0x670
acpi_cpufreq_init+0x56c/0x1000 [acpi_cpufreq]
do_one_initcall+0x13d/0x780
do_init_module+0x1c3/0x630
load_module+0x6e67/0x73b0
__do_sys_finit_module+0x181/0x240
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: 4ebe36c94a ("cpufreq: Fix kobject memleak")
Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 5.2+ <stable@vger.kernel.org> # 5.2+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 91fda1f88c ]
pci_get_device() will increase the reference count for the returned
pci_dev. We need to use pci_dev_put() to decrease the reference count
after using pci_get_device(). Let's add it.
Fixes: 59a3b3a8db ("cpufreq: AMD: Ignore the check for ProcFeedback in ST/CZ")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c72cf0cb1d ]
The cpufreq_driver->get() callback is supposed to return the current
frequency of the CPU and not the one requested by the CPUFreq core.
Fix it by returning the frequency that gets supplied to the CPU after
the DCVS operation of EPSS/OSM.
Fixes: 2849dd8bc7 ("cpufreq: qcom-hw: Add support for QCOM cpufreq HW driver")
Reported-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9901c21bca ]
If "cpu_dev" fails to get opp table in qcom_cpufreq_hw_read_lut(),
the program will return, resulting in "table" resource is not released.
Fixes: 51c843cf77 ("cpufreq: qcom: Update the bandwidth levels on frequency change")
Signed-off-by: Chen Hui <judy.chenhui@huawei.com>
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
When the amd_pstate driver is built-in users still need a method to be
able enable or disable it depending upon their circumstance.
Add support for an early parameter to do this.
There is some performance degradation on a number of ASICs in the
passive mode. This performance issue was originally discovered in
shared memory systems but it has been proven that certain workloads
on MSR systems also suffer performance issues.
Set the amd-pstate driver as disabled by default to temporarily
mitigate the performance problem.
1) with `amd_pstate=disable`, pstate driver will be disabled to load at
kernel booting.
2) with `amd_pstate=passive`, pstate driver will be enabled and loaded
as non-autonomous working mode supported in the low-level power
management firmware.
3) If neither parameter is specified, the driver will be disabled by
default to avoid triggering performance regressions in certain ASICs
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently when the amd-pstate and acpi_cpufreq are both built into
kernel as module driver, amd-pstate will not be loaded by default
in this case.
Change amd-pstate driver as built-in type, it will resolve the loading
sequence problem to allow user to make amd-pstate driver as the default
cpufreq scaling driver.
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Fixes: ec437d71db ("cpufreq: amd-pstate: Introduce a new AMD P-State driver to support future processors")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
MSR_AMD_PERF_CTL is guaranteed to be 0 on a cold boot. However, on a
kexec boot, for instance, it may have a non-zero value (if the cpu was
in a non-P0 Pstate). In such cases, the cores with non-P0 Pstates at
boot will never be pushed to P0, let alone boost frequencies.
Kexec is a common workflow for reboot on Linux and this creates a
regression in performance. Fix it by explicitly setting the
MSR_AMD_PERF_CTL to 0 during amd_pstate driver init.
Cc: All applicable <stable@vger.kernel.org>
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 46573fd636 ("cpufreq: intel_pstate: hybrid: Rework HWP
calibration") attempted to use the information from CPPC (the nominal
performance in particular) to obtain the scaling factor allowing the
frequency to be computed if the HWP performance level of the given CPU
is known or vice versa.
However, it turns out that on some platforms this doesn't work, because
the CPPC information on them does not align with the contents of the
MSR_HWP_CAPABILITIES registers.
This basically means that the only way to make intel_pstate work on all
of the hybrid platforms to date is to use the observation that on all
of them the scaling factor between the HWP performance levels and
frequency for P-cores is 78741 (approximately 100000/1.27). For
E-cores it is 100000, which is the same as for all of the non-hybrid
"core" platforms and does not require any changes.
Accordingly, make intel_pstate use 78741 as the scaling factor between
HWP performance levels and frequency for P-cores on all hybrid platforms
and drop the dependency of the HWP calibration code on CPPC.
Fixes: 46573fd636 ("cpufreq: intel_pstate: hybrid: Rework HWP calibration")
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 5.15+ <stable@vger.kernel.org> # 5.15+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some of the MSR accesses in intel_pstate are carried out on the CPU
that is running the code, but the values coming from them are used
for the performance scaling of the other CPUs.
This is problematic, for example, on hybrid platforms where
MSR_TURBO_RATIO_LIMIT for P-cores and E-cores is different, so the
values read from it on a P-core are generally not applicable to E-cores
and the other way around.
For this reason, make the driver access all MSRs on the target CPU on
platforms using the "core" pstate_funcs callbacks which is the case for
all of the hybrid platforms released to date. For this purpose, pass
a CPU argument to the ->get_max(), ->get_max_physical(), ->get_min()
and ->get_turbo() pstate_funcs callbacks and from there pass it to
rdmsrl_on_cpu() or rdmsrl_safe_on_cpu() to access the MSR on the target
CPU.
Fixes: 46573fd636 ("cpufreq: intel_pstate: hybrid: Rework HWP calibration")
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 5.15+ <stable@vger.kernel.org> # 5.15+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In the probe path, convert pr_err() to dev_err_probe() which will
check if error code is -EPROBE_DEFER and prints the error name.
It also sets the defer probe reason which can be checked later
through debugfs. It's more simple in error path.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name. It also sets the defer probe reason which can be
checked later through debugfs. It's more simple in error path.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name. It also sets the defer probe reason which can be
checked later through debugfs. It's more simple in error path.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name. It also sets the defer probe reason which can be
checked later through debugfs. It's more simple in error path.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The speedbin_nvmem parameter is not used for
get_krait_bin_format_{a,b}. Let's remove the parameter to make the code
cleaner.
Signed-off-by: Fabien Parent <fabien.parent@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This commit fixes a kernel oops because of a write in some read-only memory:
[ 9.068287] Unable to handle kernel write to read-only memory at virtual address ffff800009240ad8
..snip..
[ 9.138790] Internal error: Oops: 9600004f [#1] PREEMPT SMP
..snip..
[ 9.269161] Call trace:
[ 9.276271] __memcpy+0x5c/0x230
[ 9.278531] snprintf+0x58/0x80
[ 9.282002] qcom_cpufreq_msm8939_name_version+0xb4/0x190
[ 9.284869] qcom_cpufreq_probe+0xc8/0x39c
..snip..
The following line defines a pointer that point to a char buffer stored
in read-only memory:
char *pvs_name = "speedXX-pvsXX-vXX";
This pointer is meant to hold a template "speedXX-pvsXX-vXX" where the
XX values get overridden by the qcom_cpufreq_krait_name_version function. Since
the template is actually stored in read-only memory, when the function
executes the following call we get an oops:
snprintf(*pvs_name, sizeof("speedXX-pvsXX-vXX"), "speed%d-pvs%d-v%d",
speed, pvs, pvs_ver);
To fix this issue, we instead store the template name onto the stack by
using the following syntax:
char pvs_name_buffer[] = "speedXX-pvsXX-vXX";
Because the `pvs_name` needs to be able to be assigned to NULL, the
template buffer is stored in the pvs_name_buffer and not under the
pvs_name variable.
Cc: v5.7+ <stable@vger.kernel.org> # v5.7+
Fixes: a8811ec764 ("cpufreq: qcom: Add support for krait based socs")
Signed-off-by: Fabien Parent <fabien.parent@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
If for some reason the speedbin length is incorrect, then there is a
memory leak in the error path because we never free the speedbin buffer.
This commit fixes the error path to always free the speedbin buffer.
Cc: v5.7+ <stable@vger.kernel.org> # v5.7+
Fixes: a8811ec764 ("cpufreq: qcom: Add support for krait based socs")
Signed-off-by: Fabien Parent <fabien.parent@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
When the Tegra194 CPUFREQ driver is built as a module it is not
automatically loaded as expected on Tegra194 devices. Populate the
MODULE_DEVICE_TABLE to fix this.
Cc: v5.9+ <stable@vger.kernel.org> # v5.9+
Fixes: df320f8935 ("cpufreq: Add Tegra194 cpufreq driver")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Pull char/misc and other driver updates from Greg KH:
"Here is the large set of char/misc and other small driver subsystem
changes for 6.1-rc1. Loads of different things in here:
- IIO driver updates, additions, and changes. Probably the largest
part of the diffstat
- habanalabs driver update with support for new hardware and
features, the second largest part of the diff.
- fpga subsystem driver updates and additions
- mhi subsystem updates
- Coresight driver updates
- gnss subsystem updates
- extcon driver updates
- icc subsystem updates
- fsi subsystem updates
- nvmem subsystem and driver updates
- misc driver updates
- speakup driver additions for new features
- lots of tiny driver updates and cleanups
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits)
w1: Split memcpy() of struct cn_msg flexible array
spmi: pmic-arb: increase SPMI transaction timeout delay
spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes
spmi: pmic-arb: correct duplicate APID to PPID mapping logic
spmi: pmic-arb: add support to dispatch interrupt based on IRQ status
spmi: pmic-arb: check apid against limits before calling irq handler
spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq
spmi: pmic-arb: handle spurious interrupt
spmi: pmic-arb: add a print in cleanup_irq
drivers: spmi: Directly use ida_alloc()/free()
MAINTAINERS: add TI ECAP driver info
counter: ti-ecap-capture: capture driver support for ECAP
Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items
dt-bindings: counter: add ti,am62-ecap-capture.yaml
counter: Introduce the COUNTER_COMP_ARRAY component type
counter: Consolidate Counter extension sysfs attribute creation
counter: Introduce the Count capture component
counter: 104-quad-8: Add Signal polarity component
counter: Introduce the Signal polarity component
counter: interrupt-cnt: Implement watch_validate callback
...
Pull Kselftest updates from Shuah Khan:
"Fixes and new tests:
- Add an amd-pstate-ut test module, used by kselftest to unit test
amd-pstate functionality
- Fixes and cleanups to to cpu-hotplug to delete the fault injection
test code
- Improvements to vm test to use top_srcdir for builds"
* tag 'linux-kselftest-next-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
docs:kselftest: fix kselftest_module.h path of example module
cpufreq: amd-pstate: Add explanation for X86_AMD_PSTATE_UT
selftests/cpu-hotplug: Add log info when test success
selftests/cpu-hotplug: Reserve one cpu online at least
selftests/cpu-hotplug: Delete fault injection related code
selftests/cpu-hotplug: Use return instead of exit
selftests/cpu-hotplug: Correct log info
cpufreq: amd-pstate: modify type in argument 2 for filp_open
Documentation: amd-pstate: Add unit test introduction
selftests: amd-pstate: Add test trigger for amd-pstate driver
cpufreq: amd-pstate: Add test module for amd-pstate driver
cpufreq: amd-pstate: Expose struct amd_cpudata
selftests/vm: use top_srcdir instead of recomputing relative paths
This kernel module is used for testing. It's safe to say M here.
It can also be built-in without X86_AMD_PSTATE enabled.
Currently, only tests for amd-pstate are supported. If X86_AMD_PSTATE
is set disabled, it can tell the users test can only run on amd-pstate
driver, please set X86_AMD_PSTATE enabled.
In the future, comparison tests will be added. It can set amd-pstate
disabled and set acpi-cpufreq enabled to run test cases, then compare
the test results.
Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Meng Li <li.meng@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add amd-pstate-ut test module, this module is used by kselftest
to unit test amd-pstate functionality. This module will be
expected by some of selftests to be present and loaded.
Signed-off-by: Meng Li <li.meng@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Expose struct amd_cpudata to AMD P-State unit test module.
This data struct will be used on the following AMD P-State unit test
(amd-pstate-ut) module. The amd-pstate-ut module can get some
AMD infomations by this data struct. For example: highest perf,
nominal perf, boost supported etc.
Signed-off-by: Meng Li <li.meng@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Pull power management updates from Rafael Wysocki:
"These add support for some new hardware, extend the existing hardware
support, fix some issues and clean up code
Specifics:
- Add isupport for Tiger Lake in no-HWP mode to intel_pstate (Doug
Smythies)
- Update the AMD P-state driver (Perry Yuan):
- Fix wrong lowest perf fetch
- Map desired perf into pstate scope for powersave governor
- Update pstate frequency transition delay time
- Fix initial highest_perf value
- Clean up
- Move max CPU capacity to sugov_policy in the schedutil cpufreq
governor (Lukasz Luba)
- Add SM6115 to cpufreq-dt blocklist (Adam Skladowski)
- Add support for Tegra239 and minor cleanups (Sumit Gupta, ye
xingchen, and Yang Yingliang)
- Add freq qos for qcom cpufreq driver and minor cleanups (Xuewen
Yan, and Viresh Kumar)
- Minor cleanups around functions called at module_init() (Xiu
Jianfeng)
- Use module_init and add module_exit for bmips driver (Zhang
Jianhua)
- Add AlderLake-N support to intel_idle (Zhang Rui)
- Replace strlcpy() with unused retval with strscpy() in intel_idle
(Wolfram Sang)
- Remove redundant check from cpuidle_switch_governor() (Yu Liao)
- Replace strlcpy() with unused retval with strscpy() in the powernv
cpuidle driver (Wolfram Sang)
- Drop duplicate word from a comment in the coupled cpuidle driver
(Jason Wang)
- Make rpm_resume() return -EINPROGRESS if RPM_NOWAIT is passed to it
in the flags and the device is about to resume (Rafael Wysocki)
- Add extra debugging statement for multiple active IRQs to system
wakeup handling code (Mario Limonciello)
- Replace strlcpy() with unused retval with strscpy() in the core
system suspend support code (Wolfram Sang)
- Update the intel_rapl power capping driver:
- Use standard Energy Unit for SPR Dram RAPL domain (Zhang Rui).
- Add support for RAPTORLAKE_S (Zhang Rui).
- Fix UBSAN shift-out-of-bounds issue (Chao Qin)
- Handle -EPROBE_DEFER when regulator is not probed on
mtk-ci-devfreq.c (AngeloGioacchino Del Regno)
- Fix message typo and use dev_err_probe() in rockchip-dfi.c
(Christophe JAILLET)"
* tag 'pm-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (29 commits)
cpufreq: qcom-cpufreq-hw: Add cpufreq qos for LMh
cpufreq: Add __init annotation to module init funcs
cpufreq: tegra194: change tegra239_cpufreq_soc to static
PM / devfreq: rockchip-dfi: Fix an error message
PM / devfreq: mtk-cci: Handle sram regulator probe deferral
powercap: intel_rapl: Use standard Energy Unit for SPR Dram RAPL domain
PM: runtime: Return -EINPROGRESS from rpm_resume() in the RPM_NOWAIT case
intel_idle: Add AlderLake-N support
powercap: intel_rapl: fix UBSAN shift-out-of-bounds issue
cpufreq: tegra194: Add support for Tegra239
cpufreq: qcom-cpufreq-hw: Fix uninitialized throttled_freq warning
cpufreq: intel_pstate: Add Tigerlake support in no-HWP mode
powercap: intel_rapl: Add support for RAPTORLAKE_S
cpufreq: amd-pstate: Fix initial highest_perf value
cpuidle: Remove redundant check in cpuidle_switch_governor()
PM: wakeup: Add extra debugging statement for multiple active IRQs
cpufreq: tegra194: Remove the unneeded result variable
PM: suspend: move from strlcpy() with unused retval to strscpy()
intel_idle: move from strlcpy() with unused retval to strscpy()
cpuidle: powernv: move from strlcpy() with unused retval to strscpy()
...
Merge new material related to CPPC, PCC, APEI and OSI strings handling
for 6.1-rc1:
- Disable frequency invariance in the CPPC library if registers used
by cppc_get_perf_ctrs() are accessed via PCC (Jeremy Linton).
- Add ACPI disabled check to acpi_cpc_valid() (Perry Yuan).
- Fix Tx acknowledge in the PCC address space handler (Huisong Li).
- Use wait_for_completion_timeout() for PCC mailbox operations (Huisong
Li).
- Release resources on PCC address space setup failure path (Rafael
Mendonca).
- Remove unneeded result variables from APEI code (ye xingchen).
- Print total number of records found during BERT log parsing (Dmitry
Monakhov).
- Drop support for 3 _OSI strings that should not be necessary any
more and update documentation on custom _OSI strings so that adding
new ones is not encouraged any more (Mario Limonciello).
* acpi-cppc:
ACPI: CPPC: Disable FIE if registers in PCC regions
ACPI: CPPC: Add ACPI disabled check to acpi_cpc_valid()
* acpi-pcc:
ACPI: PCC: Fix Tx acknowledge in the PCC address space handler
ACPI: PCC: replace wait_for_completion()
ACPI: PCC: Release resources on address space setup failure path
* acpi-apei:
ACPI: APEI: Remove unneeded result variables
ACPI: APEI: Add BERT error log footer
* acpi-osi:
ACPI: OSI: Update Documentation on custom _OSI strings
ACPI: OSI: Remove Linux-HPI-Hybrid-Graphics _OSI string
ACPI: OSI: Remove Linux-Lenovo-NV-HDMI-Audio _OSI string
ACPI: OSI: Remove Linux-Dell-Video _OSI string
Pull cpufreq/arm updates for 6.1-rc1 from Viresh Kumar:
"- Add SM6115 to cpufreq-dt blocklist (Adam Skladowski).
- Add support for Tegra239 and minor cleanups (Sumit Gupta, ye xingchen,
and Yang Yingliang).
- Add freq qos for qcom cpufreq driver and minor cleanups (Xuewen Yan,
and Viresh Kumar).
- Minor cleanups around functions called at module_init() (Xiu Jianfeng).
- Use module_init and add module_exit for bmips driver (Zhang
Jianhua)."
* tag 'cpufreq-arm-updates-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: qcom-cpufreq-hw: Add cpufreq qos for LMh
cpufreq: Add __init annotation to module init funcs
cpufreq: tegra194: change tegra239_cpufreq_soc to static
cpufreq: tegra194: Add support for Tegra239
cpufreq: qcom-cpufreq-hw: Fix uninitialized throttled_freq warning
cpufreq: tegra194: Remove the unneeded result variable
cpufreq: bmips-cpufreq: Use module_init and add module_exit
cpufreq: Add SM6115 to cpufreq-dt-platdev blocklist
Before update thermal pressure, the max cpufreq should be limited.
Add QOS control for Lmh throttle cpufreq.
Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
tegra239_cpufreq_soc is only used in tegra194-cpufreq.c now, change it
to static.
Fixes: 6768860107 ("cpufreq: tegra194: Add support for Tegra239")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
PCC regions utilize a mailbox to set/retrieve register values used by
the CPPC code. This is fine as long as the operations are
infrequent. With the FIE code enabled though the overhead can range
from 2-11% of system CPU overhead (ex: as measured by top) on Arm
based machines.
So, before enabling FIE assure none of the registers used by
cppc_get_perf_ctrs() are in the PCC region. Finally, add a module
parameter which can override the PCC region detection at boot or
module reload.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Adding support for Tegra239 SoC which has eight cores in
a single cluster. Also, moving num_clusters to SoC data
to avoid over allocating memory for four clusters always.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Commit 6240aaad75 was supposed to drop the reference count to the OPP,
instead it avoided more stuff if the OPP isn't found. This isn't
entirely correct. We already have a frequency value available, we just
couldn't align it with an OPP in case of IS_ERR(opp).
Lets continue with updating thermal pressure, etc, even if we aren't
able to find an OPP here.
This fixes warning generated by the 'smatch' tool.
Fixes: 6240aaad75 ("cpufreq: qcom-hw: fix the opp entries refcounting")
Cc: v5.18+ <stable@vger.kernel.org> # v5.18+
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Users may disable HWP in firmware, in which case intel_pstate wouldn't load
unless the CPU model is explicitly supported.
Add TIGERLAKE to the list of CPUs that can register intel_pstate while not
advertising the HWP capability. Without this change, an TIGERLAKE in no-HWP
mode could only use the acpi_cpufreq frequency scaling driver.
See also commits:
d8de7a44e1: cpufreq: intel_pstate: Add Skylake servers support
fbdc21e9b0: cpufreq: intel_pstate: Add Icelake servers support in no-HWP mode
706c532885: cpufreq: intel_pstate: Add Cometlake support in no-HWP mode
Reported by: M. Cargi Ari <cagriari@pm.me>
Signed-off-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
To avoid some new AMD processors use wrong highest perf when amd pstate
driver loaded, this fix will query the highest perf from MSR register
MSR_AMD_CPPC_CAP1 and cppc_acpi interface firstly, then compare with the
highest perf value got by calling amd_get_highest_perf() function.
The lower value will be the correct highest perf we need to use.
Otherwise the CPU max MHz will be incorrect if the
amd_get_highest_perf() did not cover the new process family and model ID.
Like this lscpu info, the max frequency is incorrect.
Vendor ID: AuthenticAMD
Socket(s): 1
Stepping: 2
CPU max MHz: 5410.0000
CPU min MHz: 400.0000
BogoMIPS: 5600.54
Fixes: 3743d55b28 (x86, sched: Fix the AMD CPPC maximum performance value on certain AMD Ryzen generations)
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Return the value returned by smp_call_function_single() directly instead
of storing it in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
[ Viresh: Minor update to commit log ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Change the default transition latency to be 20ms that is more
reasonable transition delay for AMD processors in non-EPP driver mode.
Update transition delay time to 1ms, in the AMD CPU autonomous mode and
non-autonomous mode, CPPC firmware will decide frequency at 1ms timescale
based on the workload utilization.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
