Renesas DTS updates for v6.9
- Add GPIO keys and watchdog support for the RZ/G3S SMARC development
board,
- Add GNSS support for Renesas ULCB development boards equipped with
the Shimafuji Kingfisher extension,
- Add support for the standalone White Hawk CPU board,
- Add support for the R-Car V4H ES2.0 (R8A779G2) SoC and the White
Hawk Single development board,
- Add initial support for the R-Car V4M (R8A779H0) SoC and the Gray
Hawk Single development board,
- Add camera support for the RZ/G2UL SoC,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (29 commits)
arm64: dts: renesas: gray-hawk-single: Enable watchdog timer
arm64: dts: renesas: r8a779h0: Add RWDT node
arm64: dts: renesas: Improve TMU interrupt descriptions
ARM: dts: renesas: Improve TMU interrupt descriptions
arm64: dts: renesas: r9a07g043u: Add CSI and CRU nodes
arm64: dts: renesas: Add Gray Hawk Single board support
arm64: dts: renesas: Add Renesas R8A779H0 SoC support
arm64: dts: renesas: rzg3s-smarc-som: Enable the watchdog interface
arm64: dts: renesas: r9a08g045: Add watchdog node
arm64: dts: renesas: r8a779g0: Add missing SCIF_CLK2
dt-bindings: clock: Add R8A779H0 V4M CPG Core Clock Definitions
dt-bindings: clock: renesas,cpg-mssr: Document R-Car V4M support
dt-bindings: power: Add r8a779h0 SYSC power domain definitions
dt-bindings: power: renesas,rcar-sysc: Document R-Car V4M support
arm64: dts: renesas: r8a779g2: Add White Hawk Single support
arm64: dts: renesas: Add Renesas R8A779G2 SoC support
arm64: dts: renesas: white-hawk: Factor out common parts
arm64: dts: renesas: white-hawk-cpu: Factor out common parts
arm64: dts: renesas: white-hawk: Add SoC name to top-level comment
arm64: dts: renesas: white-hawk: Drop SoC parts from sub boards
...
Link: https://lore.kernel.org/r/cover.1707487834.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Document CPU clock management unit compatibles and add corresponding
clock indices. Exynos850 has two CPU clusters (CL0 and CL1), each
containing 4 Cortex-A55 cores. CPU PLLs are generating main CPU clocks
for each cluster, and there are alternate ("switch") clocks that can be
used temporarily while re-configuring the PLL for the new rate. ACLK,
ATCLK, PCLKDBG and PERIPHCLK clocks are driving corresponding buses.
CLK_CLUSTERx_SCLK are actual leaf CPU clocks and should be used to
change CPU rates. Also some CoreSight clocks can be derived from
DBG_USER (debug clock).
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20240224202053.25313-2-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
dt-bindings for Google GS101 clock controllers for v6.9
The Devicetree binding headers for Samsung Exynos and Google GS101 clock
controllers, used by the Samsung clock controller drivers.
The servers for the @codeaurora domain are long retired and any messages
addressed there will bounce. Govind Singh has left the company which
appears to leave the Q6SSTOP clock controller binding unmaintained.
Move maintenance of the binding to the Qualcomm Clock Drivers maintainer
as suggested by Bjorn Andersson.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20240202171915.4101842-1-quic_jhugo@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
dt-bindings for Google GS101 clock controllers for v6.9
The Devicetree binding headers for Samsung Exynos and Google GS101 clock
controllers, used by the Samsung clock controller drivers.
Pull clk updates from Stephen Boyd:
"Only a couple new SoCs have support added this time, primarily for
Qualcomm SM8650 based on the diffstat. Otherwise this is a collection
of non-critical fixes and cleanups to various clk drivers and their DT
bindings.
Nothing is changed in the core clk framework this time, although
there's a patch to fix a basic clk type initialization function. In
general, this pile looks to be on the smaller side.
New Drivers:
- Global, display, gpu, tcsr, and rpmh clocks on Qualcomm SM8650
- Mediatek MT7988 SoC clocks
Updates:
- Update Zynqmp driver for Versal NET platforms
- Add clk driver for Versal clocking wizard IP
- Support for stm32mp25 clks
- Add glitch free PLL setting support to si5351 clk driver
- Add DSI clocks on Amlogic g12/sm1
- Add CSI and ISP clocks on Amlogic g12/sm1
- Document bindings for i.MX93 ANATOP clock driver
- Free clk_node in i.MX SCU driver for resource with different owner
- Update the LVDS clocks to be compatible with i.MX SCU firmware 1.15
- Fix the name of the fvco in i.MX pll14xx by renaming it to fout
- Add EtherNet TSN and PCIe clocks on the Renesas R-Car V4H SoC
- Add interrupt controller and Ethernet clocks and resets on Renesas
RZ/G3S
- Check reset monitor registers on Renesas RZ/G2L-alike SoCs
- Reuse reset functionality in the Renesas RZ/G2L clock driver
- Global and RPMh clock support for the Qualcomm X1E80100 SoC
- Support for the Stromer APCS PLL found in Qualcomm IPQ5018
- Add a new type of branch clock, with support for controlling
separate memory control bits, to the Qualcomm clk driver
- Use above new branch type in Qualcomm ECPRI clk driver for QDU1000
and QRU1000
- Add a number of missing clocks related to CSI2 on Qualcomm MSM8939
- Add support for the camera clock controller on Qualcomm SC8280XP
- Correct PLL configuration in GPU and video clock controllers for
Qualcomm SM8150
- Add runtime PM support and a few missing resets to Qualcomm SM8150
video clock controller
- Fix configuration of various GCC GDSCs on Qualcomm SM8550
- Mark shared RCGs appropriately in the Qualcomm SM8550 GCC driver
- Fix up GPU and display clock controllers PLL configuration settings
on Qualcomm SM8550
- Cleanup variable init in Allwinner nkm module
- Convert various DT bindings to YAML
- A few kernel-doc fixes for Samsung SoC clock controllers"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (93 commits)
clk: mediatek: add drivers for MT7988 SoC
clk: mediatek: add pcw_chg_bit control for PLLs of MT7988
dt-bindings: clock: mediatek: add clock controllers of MT7988
dt-bindings: reset: mediatek: add MT7988 ethwarp reset IDs
dt-bindings: clock: mediatek: add MT7988 clock IDs
clk: mediatek: mt8188-topckgen: Refactor parents for top_dp/edp muxes
clk: mediatek: mt8195-topckgen: Refactor parents for top_dp/edp muxes
clk: mediatek: clk-mux: Support custom parent indices for muxes
dt-bindings: clock: sophgo: Add clock controller of CV1800 series SoC
clk: starfive: jh7100: Add CLK_SET_RATE_PARENT to gmac_tx
clk: starfive: Add flags argument to JH71X0__MUX macro
clk: imx: pll14xx: change naming of fvco to fout
clk: imx: clk-imx8qxp: fix LVDS bypass, pixel and phy clocks
clk: imx: scu: Fix memory leak in __imx_clk_gpr_scu()
clk: fixed-rate: fix clk_hw_register_fixed_rate_with_accuracy_parent_hw
clk: qcom: dispcc-sm8650: Add test_ctl parameters to PLL config
clk: qcom: gpucc-sm8650: Add test_ctl parameters to PLL config
clk: qcom: dispcc-sm8550: Use the correct PLL configuration function
clk: qcom: dispcc-sm8550: Update disp PLL settings
clk: qcom: gpucc-sm8550: Update GPU PLL settings
...
* clk-rs9:
clk: rs9: Add support for 9FGV0841
clk: rs9: Replace model check with bitshift from chip data
clk: rs9: Limit check to vendor ID in VID register
dt-bindings: clk: rs9: Add 9FGV0841
Qualcomm ARM64 updates for v6.8
Support is added for the new Snapdragon 8 Gen 3 mobile platform, with
support for the MTP and QRD development devices, the new Snapdragon X
Elite compute platform with QCP and CRD development/references devices,
the QCS6590/QCM6490 platform with support for the IDP development device
and the Robotics RB3gen2 board, the Huawei Honor 5X/GR5 handset
built on MSM8939, and Xiaomi Pad 6 on SM8250.
On IPQ5018 and IPQ6018 platform support for CPUfreq, USB, and one
additional QUP SPI controller is added.
CPU OPP tables are selectively enabled based on fuses, for both IPQ5332
and IPQ6018. IPQ6018 gains description of a few more SPI and UART nodes.
Common elements of the IPQ9574 RDP boards are refactored into a common
include file. IPQ9574 also gains description of its LEDs and WPS
busttons.
MSM8916 finally gets the DSP-based audio described, and this is enabled
for a variety of boards. Acer Iconia Talk S and Loncheer L8910 gains
notification LED, battery and charger support is added to Loncheer
L8150, and GPU is enabled for Samsung Galaxy Tab A.
Similariy DSP-based audio is added on MSM8939, the BAM-DMUX support is
enabled as well. The Longcheer L9100 gains RGB notification LED support,
and the wireless subsystem is enabled.
Missing SPI controllers are described on MSM8953. On MSM8996 the MPM is
enabled, to allow using wakeup interrupts. Interconnect providers, MPM
and display are added to QCM2290.
UFS, remoteprocs and WiFi is enabled for Fairphone FP5.
On Fairphone FP3 audio, WiFi and Bluetooth are enabled.
On the Robotics RB1, HDMI and the CAN bus controller are added. On
Robotics RB2 Bluetooth, the modem remoteproc and WiFi are enabled.
Bluetooth is enabled on the Robotics RB5.
On SA8775P tsens and thermal is added, as well as the random number
generator.
Sound and RTC support is added for the Acer Aspire 1.
On SC7280 DeviceTree is refactored, in order to allow non-Chrome devices
to inherit the base dtsi. Support for UFS, crypto, TrustZone based
remoteprocs, the Camera Control Interface (CCI) and random number
generator support are added. Additionally a variety of smaller fixes are
introduced.
A variety of fixes are introduced for SC8180X, in particular missing
power-domains and interconnects.
On SC8280XP the camera clock controller is added, and a number of
smaller fixes are introduced.
The display subsystem in SDM670 is described.
On SDX75 interconnect providers are added, as is USB3 and the related
PHY, which is then enabled on the IDP device.
On SM6115 interconnect providers are added and existing clients are
wired up. A UART controller is added as well.
The MPM is added, to provide wakeup interrutps, on SM6375. The modem
subsystem, and WiFi are enabled on Sony Xperia 10 IV, a few regulator
supplies are corrected.
On SM8150 the DisplayPort controller is added, for USB Type-C output,
which together with the addition of HDMI is described on the HDK board.
GPU and random number generator support are added to SM8450, and enabled
on the HDK board.
On SM8550 GPU, IPA, random number generator, missing SoundWire ports are
added, and enabled on both MTP and QRD devices.
Additionally a large number of smaller functional and DeviceTree binding
validation issues are corrected across a variety of platforms.
* tag 'qcom-arm64-for-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (288 commits)
arm64: dts: qcom: sc8180x-primus: Allow UFS regulators load/mode setting
arm64: dts: qcom: sc8180x: Describe the GIC redistributor
arm64: dts: qcom: sc8180x: Add interconnects to UFS
arm64: dts: qcom: sc8180x: Add missing MDP clocks
arm64: dts: qcom: sc8180x: Add UFS GDSC
arm64: dts: qcom: sc7280*: move MPSS and WPSS memory to dtsi
arm64: dts: qcom: sc7280: Rename reserved-memory nodes
arm64: dts: qcom: sc7280: Remove unused second MPSS reg
arm64: dts: qcom: sdm670: add display subsystem
arm64: dts: qcom: sm8150-hdk: enable DisplayPort and USB-C altmode
arm64: dts: qcom: sm8150: add USB-C ports to the OTG USB host
arm64: dts: qcom: sm8150: add USB-C ports to the USB+DP QMP PHY
arm64: dts: qcom: sm8150: add DisplayPort controller
arm64: dts: qcom: sm8150-hdk: fix SS USB regulators
arm64: dts: qcom: sm8150-hdk: enable HDMI output
arm64: dts: qcom: sm8150: make dispcc cast minimal vote on MMCX
arm64: dts: qcom: sm8650: add fastrpc-compute-cb nodes
arm64: dts: qcom: sm8550-qrd: add PM8010 regulators
arm64: dts: qcom: sm8550-mtp: Add pm8010 regulators
arm64: dts: qcom: qcm2290: Hook up MPM
...
Link: https://lore.kernel.org/r/20231219145402.874161-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Samsung DTS ARM64 changes for v6.8
Two (and a half) major items are coming with this pull request:
1. Add specific compatibles to all Samsung Exynos and Tesla FSD blocks,
because that's what guidelines expect [1] and is generally
recommended practice. Existing compatibles are left untouched, thus
no driver changes are needed. The work only cleans things up, so any
future contributions will use recommended style: specific and
fallback compatibles.
Since no driver changes are needed in this work and the DTS is
directly affected by bindings change (running tests with `make
dtbs_check`), this pull includes all bindings changes, even though
usual practice is that bindings come via driver subsystem. Keeping
everything here makes review and testing easier. Also will allow us
to avoid conflicts related to new platforms (see below).
2. Add ExynosAutov920 SoC and SADK board (Samsung Automotive Development
Kit) with minimal support so far: serial console, GPIO-based keys and
PWM fan.
3. Add few bindings for upcoming Google GS101 SoC. This pull request
does not include its DTS yet, just few reviewed dependencies. DTS
will be coming soon.
[1] Documentation/devicetree/bindings/writing-bindings.rst
* tag 'samsung-dt64-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (38 commits)
arm64: dts: exynos: add minimal support for exynosautov920 sadk board
arm64: dts: exynos: add initial support for exynosautov920 SoC
dt-bindings: samsung: exynos-sysreg: combine exynosautov920 with other enum
dt-bindings: soc: google: exynos-sysreg: add dedicated SYSREG compatibles to GS101
dt-bindings: clock: Add Google gs101 clock management unit bindings
dt-bindings: soc: samsung: exynos-pmu: Add gs101 compatible
arm64: dts: fsd: add specific compatibles for Tesla FSD
dt-bindings: watchdog: samsung: add specific compatible for Tesla FSD
dt-bindings: samsung: exynos-pmu: add specific compatible for Tesla FSD
dt-bindings: serial: samsung: add specific compatible for Tesla FSD
dt-bindings: pwm: samsung: add specific compatible for Tesla FSD
dt-bindings: i2c: exynos5: add specific compatible for Tesla FSD
arm64: dts: exynosautov9: use Exynos7 fallbacks for pin wake-up controller
arm64: dts: exynos850: use Exynos7 fallbacks for pin wake-up controllers
dt-bindings: hwinfo: samsung,exynos-chipid: add exynosautov920 compatible
dt-bindings: arm: samsung: Document exynosautov920 SADK board binding
dt-bindings: pwm: samsung: add exynosautov920 compatible
dt-bindings: serial: samsung: add exynosautov920-uart compatible
dt-bindings: samsung: usi: add exynosautov920-usi compatible
dt-bindings: samsung: exynos-pmu: add exynosautov920 compatible
...
Link: https://lore.kernel.org/r/20231212093105.13938-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The following additional properties are described:
- clock-names
- clock-frequency of the clkout child nodes
In order to suppress warnings from the DT schema validator, the clkout
child nodes are prescribed names clkout@[0-7] rather than clkout[0-7].
The example is refined as follows:
- correct the usage of property pll-master -> silabs,pll-master
- give an example of how the silabs,pll-reset property can be used
I made myself maintainer of the file as I cannot presume that anybody
else wants the responsibility.
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Rabeeh Khoury <rabeeh@solid-run.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Link: https://lore.kernel.org/r/20231124-alvin-clk-si5351-no-pll-reset-v6-1-69b82311cb90@bang-olufsen.dk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Convert Broadcom Kona family clock controller unit (CCU) bindings
to DT schema.
Changes during conversion:
- remove "dmac" from clock-output-names for brcm,bcm11351-master-ccu,
such a clock doesn't exist
- remove "uartb4" from clock-output-names for brcm,bcm21664-slave-ccu,
such a clock doesn't exist
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/ZVED01t3+coBd44x@standask-GA-A55M-S2HP
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
For MT8188, VPPSYS0 and VPPSYS1 are 2 display pipes with
hardware differences in power domains, clocks and subsystem counts,
which should be probed from mtk-mmsys driver to populate device by
platform_device_register_data then start its own clock driver.
Signed-off-by: yu-chang.lee <yu-chang.lee@mediatek.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The hi3620-clock binding is simple and always a child of the
"hisilicon,sysctrl" node, so just add it into the hisilicon,sysctrl
binding and drop the old txt binding.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Arnd Bergmann
Sam Protsenko
Théo Lebrun
Rafał Miłecki
Dmitry Baryshkov
Krzysztof Kozlowski
André Draszik
Bjorn Andersson
Rajendra Nayak
Abel Vesa
Jeffrey Hugo
Geert Uytterhoeven
Bjorn Andersson
Varada Pavani
Tudor Ambarus
Konrad Dybcio
Linus Torvalds
Stephen Boyd
Daniel Golle
Inochi Amaoto
Alvin Šipraga
Gabriel Fernandez
Marek Vasut
Stanislav Jakubek
Shubhrajyoti Datta
yu-chang.lee
Peter Griffin
Rob Herring