Pull mailbox updates from Jassi Brar:
- fix kconfig dependencies (mhu-v3, omap2+)
- use devie name instead of genereic imx_mu_chan as interrupt name
(imx)
- enable sa8255p and qcs8300 ipc controllers (qcom)
- Fix timeout during suspend mode (bcm2835)
- convert to use use of_property_match_string (mailbox)
- enable mt8188 (mediatek)
- use devm_clk_get_enabled helpers (spreadtrum)
- fix device-id typo (rockchip)
* tag 'mailbox-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox, remoteproc: omap2+: fix compile testing
dt-bindings: mailbox: qcom-ipcc: Document QCS8300 IPCC
dt-bindings: mailbox: qcom-ipcc: document the support for SA8255p
dt-bindings: mailbox: mtk,adsp-mbox: Add compatible for MT8188
mailbox: Use of_property_match_string() instead of open-coding
mailbox: bcm2835: Fix timeout during suspend mode
mailbox: sprd: Use devm_clk_get_enabled() helpers
mailbox: rockchip: fix a typo in module autoloading
mailbox: imx: use device name in interrupt name
mailbox: ARM_MHU_V3 should depend on ARM64
Document the Inter-Processor Communication Controller on the Qualcomm
QCS8300 Platform, which will be used to route interrupts across various
subsystems found on the SoC.
Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Add mediatek,gce-props.yaml for common GCE properties that is used for
both mailbox providers and consumers. We place the common property
"mediatek,gce-events" in this binding currently.
The property "mediatek,gce-events" is used for GCE event ID corresponding
to a hardware event signal sent by the hardware or a software driver.
If the mailbox providers or consumers want to manipulate the value of
the event ID, they need to know the specific event ID.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Add i.MX95 Generic, Secure Enclave and V2X Message Unit compatible string.
And the MUs in AONMIX has internal RAMs for SCMI shared buffer usage.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Add documentation for AMD-Xilinx Versal platform Inter Processor Interrupt
controller. Versal IPI controller contains buffer-less IPI which do not
have buffers for message passing. For such IPI channels message buffers
are not expected and only notification to/from remote agent is expected.
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
"xlnx,ipi-id" is handled as required property but is
missing from binding doc required list of mailbox child node.
Add that to required list. This does not break backward
compatibility but bug in bindings document.
Fixes: 4a855a9579 ("dt-bindings: mailbox: zynqmp_ipi: convert to yaml")
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Rework the compatibles and group devices which have similar interface
(same from Linux driver point of view) as compatible. This allows
smaller of_device_id table in the Linux driver and smaller
allOf:if:then: constraints.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
qcom,ipq8074-apcs-apps-global compatible is listed in two places: with
and without fallback. Drop the second case to match DTS.
Fixes: 34d8775a0e ("dt-bindings: mailbox: qcom,apcs-kpss-global: use fallbacks for few variants")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Current dt-bindings does not contain compatible property
for child mailbox node. Child mailbox nodes are used
to represent destination (remote) IPI agents. The compatible
property for all destination mailboxes must be required to
identify the node.
This addition of new required property does not break ABI
as current driver does not use this compatible property
but, new features in driver should use this property.
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Documentation/process/license-rules.rst and checkpatch expect the SPDX
identifier syntax for multiple licenses to use capital "OR". Correct it
to keep consistent format and avoid copy-paste issues.
Correct also the format // -> .* in few Allwinner binding headers as
pointed out by checkpatch:
WARNING: Improper SPDX comment style for 'include/dt-bindings/reset/sun50i-h6-ccu.h', please use '/*' instead
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20230823084540.112602-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Pull mailbox updates from Jassi Brar:
- tegra: support for Tegra264
- broadcom: convert bcm2835 bindings from txt to yaml bcm2835
- qcom: support for IPQ5018
- ti: always zero TX data fields
* tag 'mailbox-v6.5' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
mailbox: ti-msgmgr: Fill non-message tx data fields with 0x0
mailbox: tegra: add support for Tegra264
dt-bindings: mailbox: tegra: Document Tegra264 HSP
dt-bindings: mailbox: convert bcm2835-mbox bindings to YAML
dt-bindings: mailbox: qcom: Add IPQ5018 APCS compatible
Add the compatible string for the HSP block found on the Tegra264 SoC.
The HSP block in Tegra264 is not register compatible with the one in
Tegra194 or Tegra234 hence there is no fallback compatibility string.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Pull mailbox updates from Jassi Brar:
- mailbox api: allow direct registration to a channel and convert omap
and pcc to use mbox_bind_client
- omap and hi6220 : use of_property_read_bool
- test: fix double-free and use spinlock header
- rockchip and bcm-pdc: drop of_match_ptr
- mpfs: change config symbol
- mediatek gce: support MT6795
- qcom apcs: consolidate of_device_id and support IPQ9574
* tag 'mailbox-v6.4' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
dt-bindings: mailbox: qcom: add compatible for IPQ9574 SoC
mailbox: qcom-apcs-ipc: do not grow the of_device_id
dt-bindings: mailbox: qcom,apcs-kpss-global: use fallbacks for few variants
dt-bindings: mailbox: mediatek,gce-mailbox: Add support for MT6795
mailbox: mpfs: convert SOC_MICROCHIP_POLARFIRE to ARCH_MICROCHIP_POLARFIRE
mailbox: bcm-pdc: drop of_match_ptr for ID table
mailbox: rockchip: drop of_match_ptr for ID table
mailbox: mailbox-test: Fix potential double-free in mbox_test_message_write()
mailbox: mailbox-test: Explicitly include header for spinlock support
mailbox: Use of_property_read_bool() for boolean properties
mailbox: pcc: Use mbox_bind_client
mailbox: omap: Use mbox_bind_client
mailbox: Allow direct registration to a channel
Rework the compatibles of IPQ8074, SC7180, SC8180X and SM8150 as
compatible devices (same from Linux driver point of view). This allows
smaller of_device_id table in the Linux driver and smaller
allOf:if:then: constraints.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Pull clk updates from Stephen Boyd:
"Nothing looks out of the ordinary in this batch of clk driver updates.
There are a couple patches to the core clk framework, but they're all
basically cleanups or debugging aids. The driver updates and new
additions are dominated in the diffstat by Qualcomm and MediaTek
drivers. Qualcomm gained a handful of new drivers for various SoCs,
and MediaTek gained a bunch of drivers for MT8188. The MediaTek
drivers are being modernized as well, so there are updates all over
that vendor's clk drivers. There's also a couple other new clk drivers
in here, for example the Starfive JH7110 SoC support is added.
Outside of the two major SoC vendors though, we have the usual
collection of non-critical fixes and cleanups to various clk drivers.
It's good to see that we're getting more cleanups and modernization
patches. Maybe one day we'll be able to properly split clk providers
from clk consumers.
Core:
- Print an informational message before disabling unused clks
New Drivers:
- BCM63268 timer clock and reset controller
- Frequency Hopping (FHCTL) on MediaTek MT6795, MT8173, MT8192 and
MT8195 SoCs
- Mediatek MT8188 SoC clk drivers
- Clock driver for Sunplus SP7021 SoC
- Clk driver support for Loongson-2 SoCs
- Clock driver for Skyworks Si521xx I2C PCIe clock generators
- Initial Starfive JH7110 clk/reset support
- Global clock controller drivers for Qualcomm SM7150, IPQ9574,
MSM8917 and IPQ5332 SoCs
- GPU clock controller drivers for SM6115, SM6125, SM6375 and SA8775P
SoCs
Updates:
- Shrink size of clk_fractional_divider a little
- Convert various clk drivers to devm_of_clk_add_hw_provider()
- Convert platform clk drivers to remove_new()
- Converted most Mediatek clock drivers to struct platform_driver
- MediaTek clock drivers can be built as modules
- Reimplement Loongson-1 clk driver with DT support
- Migrate socfpga clk driver to of_clk_add_hw_provider()
- Support for i3c clks on Aspeed ast2600 SoCs
- Add clock generic devm_clk_hw_register_gate_parent_data
- Add audiomix block control for i.MX8MP
- Add support for determine_rate to i.MX composite-8m
- Let the LCDIF Pixel clock of i.MX8MM and i.MX8MN set parent rate
- Provide clock name in error message for clk-gpr-mux on get parent
failure
- Drop duplicate imx_clk_mux_flags macro
- Register the i.MX8MP Media Disp2 Pix clock as bus clock
- Add Media LDB root clock to i.MX8MP
- Make i.MX8MP nand_usdhc_bus clock as non-critical
- Fix the rate table for i.MX fracn-gppll
- Disable HW control for the fracn-gppll in order to be controlled by
register write
- Add support for interger PLL in fracn-gppll
- Add mcore_booted module parameter to i.MX93 provider
- Add NIC, A55 and ARM PLL clocks to i.MX93
- Fix i.MX8ULP XBAR_DIVBUS and AD_SLOW clock parents
- Use "divider closest" clock type for PLL4_PFD dividers on i.MX8ULP
to get more accurate clock rates
- Mark the MU0_Bi and TPM5 clocks on i.MX8ULP as critical
- Update some of the i.MX critical clocks flags to allow glitchless
on-the-fly rate change.
- Add I2C5 clock on Renesas R-Car V3H
- Exynos850: Add CMU_G3D clock controller for the Mali GPU
- Extract Exynos5433 (ARM64) clock controller power management code
to common driver parts
- Exynos850: make PMU_ALIVE_PCLK clock critical
- Add Audio, thermal, camera (CSI-2), Image Signal Processor/Channel
Selector (ISPCS), and video capture (VIN) clocks on Renesas R-Car
V4H
- Add video capture (VIN) clocks on Renesas R-Car V3H
- Add Cortex-A53 System CPU (Z2) clocks on Renesas R-Car V3M and V3H
- Support for Stromer Plus PLL on Qualcomm IPQ5332
- Add a missing reset to Qualcomm QCM2290
- Migrate Qualcomm IPQ4019 to clk_parent_data
- Make USB GDSCs enter retention state when disabled on Qualcomm
SM6375, MSM8996 and MSM8998 SoCs
- Set floor rounding clk_ops for Qualcomm QCM2290 SDCC2 clk
- Add two EMAC GDSCs on Qualcomm SC8280XP
- Use shared rcg clk ops in Qualcomm SM6115 GCC
- Park Qualcomm SM8350 PCIe PIPE clks when disabled
- Add GDSCs to Qualcomm SC7280 LPASS audio clock controller
- Add missing XO clocks to Qualcomm MSM8226 and MSM8974
- Convert some Qualcomm clk DT bindings to YAML
- Reparenting fix for the clock supplying camera modules on Rockchip
rk3399
- Mark more critical (bus-)clocks on Rockchip rk3588"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (290 commits)
clk: qcom: gcc-sc8280xp: Add EMAC GDSCs
clk: starfive: Delete the redundant dev_set_drvdata() in JH7110 clock drivers
clk: rockchip: rk3588: make gate linked clocks critical
clk: qcom: dispcc-qcm2290: Remove inexistent DSI1PHY clk
clk: qcom: add the GPUCC driver for sa8775p
dt-bindings: clock: qcom: describe the GPUCC clock for SA8775P
clk: qcom: gcc-sm8350: fix PCIe PIPE clocks handling
clk: qcom: lpassaudiocc-sc7280: Add required gdsc power domain clks in lpass_cc_sc7280_desc
clk: qcom: lpasscc-sc7280: Skip qdsp6ss clock registration
dt-bindings: clock: qcom,sc7280-lpasscc: Add qcom,adsp-pil-mode property
clk: starfive: Avoid casting iomem pointers
clk: microchip: fix potential UAF in auxdev release callback
clk: qcom: rpm: Use managed `of_clk_add_hw_provider()`
clk: mediatek: fhctl: Mark local variables static
clk: sifive: make SiFive clk drivers depend on ARCH_ symbols
clk: uniphier: Use managed `of_clk_add_hw_provider()`
clk: si5351: Use managed `of_clk_add_hw_provider()`
clk: si570: Use managed `of_clk_add_hw_provider()`
clk: si514: Use managed `of_clk_add_hw_provider()`
clk: lmk04832: Use managed `of_clk_add_hw_provider()`
...
The mailbox hardware remains unchanged on M2 SoCs so just add its
per-SoC compatible.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Hector Martin <marcan@marcan.st>
Pull remoteproc updates from Bjorn Andersson:
- Support for PRU clients to acquire a control reference to the PRU
instances is introduced, and the PRU now allows specifying
firmware-name in Devicetree. sysfs is requested to be read-only when
the remoteproc instance is consumed by another kernel driver
- Support for the C7xv DSP on AM62A SoC is introduced
- The Devicetree binding for the Qualcomm PAS devices are split up in
multiple files, to better account for the differences in resources
between them. A number of missing Devicetree bindings are added, and
the Qualcomm WCNSS binding is converted to YAML
- A few cleanups are introduced for the Mediatek SCP driver. And a
sanity check of the firmware image is introduced in the Mediatek
driver
- For Qualcomm SC7280 ADSP support is added, MSM8953 gains ADSP and
modem support, SM6115 and SM8550 gains ADSP, CDSP and modem support,
and support for pronto v3 support (used on e.g. MSM8953) is added
- The Qualcomm modem remoteproc driver is modified to use a no-map
reserved-memory region for it's authentication metadata, in order to
avoid fatal security violations caused by accesses from Linux during
the authentication process
- Support for separate loading of a Devicetree blob is added to the PAS
driver, and support for the PAS driver to carve out DSM memory for
the modem is added as well
- The Qualcomm ADSP remoteproc driver gains support for mapping memory
into specific range using the IOMMU. The sysmon driver is
transitioned to strlcpy()
* tag 'rproc-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (69 commits)
dt-bindings: mailbox: qcom,apcs-kpss-global: drop mbox-names from example
dt-bindings: remoteproc: qcom,glink-edge: correct label description
dt-bindings: remoteproc: qcom,glink-rpm-edge: convert to DT schema
dt-bindings: remoteproc: qcom,sm8550-pas: correct power domains
remoteproc: qcom_q6v5_pas: enable sm8550 adsp & cdsp autoboot
dt-bindings: remoteproc: qcom: Add sm6115 pas yaml file
remoteproc: qcom: pas: Add sm6115 remoteprocs
remoteproc: qcom: pas: Adjust the phys addr wrt the mem region
remoteproc: qcom: fix sparse warnings
remoteproc: qcom: replace kstrdup with kstrndup
remoteproc: mediatek: Check the SCP image format
remoteproc: qcom_q6v5_mss: Use a carveout to authenticate modem headers
Revert "remoteproc: qcom_q6v5_mss: map/unmap metadata region before/after use"
dt-bindings: remoteproc: qcom,sc7280-mss-pil: Update memory-region
dt-bindings: remoteproc: qcom,sc7180-mss-pil: Update memory-region
dt-bindings: remoteproc: qcom,msm8996-mss-pil: Update memory region
dt-bindings: remoteproc: qcom,q6v5: Move MSM8996 to schema
remoteproc: qcom_q6v5_pas: add sm8550 adsp, cdsp & mpss compatible & data
remoteproc: qcom_q6v5_pas: add support for assigning memory to firmware
remoteproc: qcom_q6v5_pas: add support for dtb co-firmware loading
...
Add the mailbox compatible for the IPQ5332 SoC.
Since the IPQ5332 mailbox is compatible with the IPQ6018, lets create the
fallback to ipq6018 compatible, so that we don't bloat the of_device_id
table in the driver.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The schema incorrectly lists some of the platforms in the statement
requiring clocks/clock-names. Correct this by moving platforms not
requiring additional clocks to the separate clause.
Fixes: 0d17014e91 ("dt-bindings: mailbox: Add binding for SDX55 APCS")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
On msm8976 platform APCS also uses syscon compatible, so move it to the
block of compatibles using SoC-compat together with syscon.
Fixes: 6054546618 ("dt-bindings: mailbox: qcom,apcs-kpss-global: Add syscon const for relevant entries")
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The commit 0d17014e91 ("dt-bindings: mailbox: Add binding for SDX55
APCS") added SDX55 compatible string to one of clock-selection
conditions, but failed to add one to the main schema's compatible list.
Fix this omission.
Fixes: 0d17014e91 ("dt-bindings: mailbox: Add binding for SDX55 APCS")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Pull mailbox updates from Jassi Brar:
- qcom: enable sc8280xp, sm8550 and sm4250 support
- ti: default to ARCH_K3 for msg manager
- mediatek:
- add mt8188 and mt8186 support
- request irq only after got ready
- zynq-ipi: fix error handling after device_register
- mpfs: check sys-con status
- rockchip: simplify by using device_get_match_data
* tag 'mailbox-v6.2' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
dt-bindings: mailbox: qcom-ipcc: Add compatible for SM8550
mailbox: mtk-cmdq: Do not request irq until we are ready
mailbox: zynq-ipi: fix error handling while device_register() fails
mailbox: mtk-cmdq-mailbox: Use platform data directly instead of copying
mailbox: arm_mhuv2: Fix return value check in mhuv2_probe()
dt-bindings: mailbox: mediatek,gce-mailbox: add mt8188 compatible name
dt-bindings: mailbox: add GCE header file for mt8188
mailbox: mpfs: read the system controller's status
mailbox: mtk-cmdq: add MT8186 support
mailbox: mtk-cmdq: add gce ddr enable support flow
mailbox: mtk-cmdq: add gce software ddr enable private data
mailbox: mtk-cmdq: Use GCE_CTRL_BY_SW definition instead of number
mailbox: rockchip: Use device_get_match_data() to simplify the code
dt-bindings: mailbox: qcom-ipcc: Add sc8280xp compatible
mailbox: config: ti-msgmgr: Default set to ARCH_K3 for TI msg manager
mailbox: qcom-apcs-ipc: Add SM4250 APCS IPC support
dt-bindings: mailbox: qcom: Add SM4250 APCS compatible
