[ Upstream commit aa280a08e7 ]
array_index_nospec() is no use if the result gets spilled to the stack, as
it makes the believed safe-under-speculation value subject to memory
predictions.
For all practical purposes, this means array_index_nospec() must be used in
the expression that accesses the array.
As the code currently stands, it's the wrong side of irqentry_enter(), and
'index' is put into %ebp across the function call.
Remove the index variable and reposition array_index_nospec(), so it's
calculated immediately before the array access.
Fixes: 14619d912b ("x86/fred: FRED entry/exit and dispatch code")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260106131504.679932-1-andrew.cooper3@citrix.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3da01ffe1a upstream.
The FRED specification has been changed in v9.0 to state that there
is no need for FRED event handlers to begin with ENDBR64, because
in the presence of supervisor indirect branch tracking, FRED event
delivery does not enter the WAIT_FOR_ENDBRANCH state.
As a result, remove ENDBR64 from FRED entry points.
Then add ANNOTATE_NOENDBR to indicate that FRED entry points will
never be used for indirect calls to suppress an objtool warning.
This change implies that any indirect CALL/JMP to FRED entry points
causes #CP in the presence of supervisor indirect branch tracking.
Credit goes to Jennifer Miller <jmill@asu.edu> and other contributors
from Arizona State University whose research shows that placing ENDBR
at entry points has negative value thus led to this change.
Note: This is obviously an incompatible change to the FRED
architecture. But, it's OK because there no FRED systems out in the
wild today. All production hardware and late pre-production hardware
will follow the FRED v9 spec and be compatible with this approach.
[ dhansen: add note to changelog about incompatibility ]
Fixes: 14619d912b ("x86/fred: FRED entry/exit and dispatch code")
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Link: https://lore.kernel.org/linux-hardening/Z60NwR4w%2F28Z7XUa@ubun/
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250716063320.1337818-1-xin%40zytor.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f0cd7091cc upstream.
The software mitigation for BHI is to execute BHB clear sequence at syscall
entry, and possibly after a cBPF program. ITS mitigation thunks RETs in the
lower half of the cacheline. This causes the RETs in the BHB clear sequence
to be thunked as well, adding unnecessary branches to the BHB clear
sequence.
Since the sequence is in hot path, align the RET instructions in the
sequence to avoid thunking.
This is how disassembly clear_bhb_loop() looks like after this change:
0x44 <+4>: mov $0x5,%ecx
0x49 <+9>: call 0xffffffff81001d9b <clear_bhb_loop+91>
0x4e <+14>: jmp 0xffffffff81001de5 <clear_bhb_loop+165>
0x53 <+19>: int3
...
0x9b <+91>: call 0xffffffff81001dce <clear_bhb_loop+142>
0xa0 <+96>: ret
0xa1 <+97>: int3
...
0xce <+142>: mov $0x5,%eax
0xd3 <+147>: jmp 0xffffffff81001dd6 <clear_bhb_loop+150>
0xd5 <+149>: nop
0xd6 <+150>: sub $0x1,%eax
0xd9 <+153>: jne 0xffffffff81001dd3 <clear_bhb_loop+147>
0xdb <+155>: sub $0x1,%ecx
0xde <+158>: jne 0xffffffff81001d9b <clear_bhb_loop+91>
0xe0 <+160>: ret
0xe1 <+161>: int3
0xe2 <+162>: int3
0xe3 <+163>: int3
0xe4 <+164>: int3
0xe5 <+165>: lfence
0xe8 <+168>: pop %rbp
0xe9 <+169>: ret
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fc9fd3f984 ]
write_ibpb() does IBPB, which (among other things) flushes branch type
predictions on AMD. If the CPU has SRSO_NO, or if the SRSO mitigation
has been disabled, branch type flushing isn't needed, in which case the
lighter-weight SBPB can be used.
The 'x86_pred_cmd' variable already keeps track of whether IBPB or SBPB
should be used. Use that instead of hardcoding IBPB.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/17c5dcd14b29199b75199d67ff7758de9d9a4928.1744148254.git.jpoimboe@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 57e2428f8d ]
PUSH_REGS with save_ret=1 is used by interrupt entry helper functions that
initially start with a UNWIND_HINT_FUNC ORC state.
However, save_ret=1 means that we clobber the helper function's return
address (and then later restore the return address further down on the
stack); after that point, the only thing on the stack we can unwind through
is the IRET frame, so use UNWIND_HINT_IRET_REGS until we have a full
pt_regs frame.
( An alternate approach would be to move the pt_regs->di overwrite down
such that it is the final step of pt_regs setup; but I don't want to
rearrange entry code just to make unwinding a tiny bit more elegant. )
Fixes: 9e809d15d6 ("x86/entry: Reduce the code footprint of the 'idtentry' macro")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20250325-2025-03-unwind-fixes-v1-1-acd774364768@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
GCC and Clang both implement stack protector support based on Thread Local
Storage (TLS) variables, and this is used in the kernel to implement per-task
stack cookies, by copying a task's stack cookie into a per-CPU variable every
time it is scheduled in.
Both now also implement -mstack-protector-guard-symbol=, which permits the TLS
variable to be specified directly. This is useful because it will allow to
move away from using a fixed offset of 40 bytes into the per-CPU area on
x86_64, which requires a lot of special handling in the per-CPU code and the
runtime relocation code.
However, while GCC is rather lax in its implementation of this command line
option, Clang actually requires that the provided symbol name refers to a TLS
variable (i.e., one declared with __thread), although it also permits the
variable to be undeclared entirely, in which case it will use an implicit
declaration of the right type.
The upshot of this is that Clang will emit the correct references to the stack
cookie variable in most cases, e.g.,
10d: 64 a1 00 00 00 00 mov %fs:0x0,%eax
10f: R_386_32 __stack_chk_guard
However, if a non-TLS definition of the symbol in question is visible in the
same compilation unit (which amounts to the whole of vmlinux if LTO is
enabled), it will drop the per-CPU prefix and emit a load from a bogus
address.
Work around this by using a symbol name that never occurs in C code, and emit
it as an alias in the linker script.
Fixes: 3fb0fdb3bb ("x86/stackprotector/32: Make the canary into a regular percpu variable")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Cc: stable@vger.kernel.org
Link: https://github.com/ClangBuiltLinux/linux/issues/1854
Link: https://lore.kernel.org/r/20241105155801.1779119-2-brgerst@gmail.com
Pull x86 fixes from Borislav Petkov:
- Explicitly disable the TSC deadline timer when going idle to address
some CPU errata in that area
- Do not apply the Zenbleed fix on anything else except AMD Zen2 on the
late microcode loading path
- Clear CPU buffers later in the NMI exit path on 32-bit to avoid
register clearing while they still contain sensitive data, for the
RDFS mitigation
- Do not clobber EFLAGS.ZF with VERW on the opportunistic SYSRET exit
path on 32-bit
- Fix parsing issues of memory bandwidth specification in sysfs for
resctrl's memory bandwidth allocation feature
- Other small cleanups and improvements
* tag 'x86_urgent_for_v6.12_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Always explicitly disarm TSC-deadline timer
x86/CPU/AMD: Only apply Zenbleed fix for Zen2 during late microcode load
x86/bugs: Use code segment selector for VERW operand
x86/entry_32: Clear CPU buffers after register restore in NMI return
x86/entry_32: Do not clobber user EFLAGS.ZF
x86/resctrl: Annotate get_mem_config() functions as __init
x86/resctrl: Avoid overflow in MB settings in bw_validate()
x86/amd_nb: Add new PCI ID for AMD family 1Ah model 20h
entry_ibpb() should invalidate all indirect predictions, including return
target predictions. Not all IBPB implementations do this, in which case the
fallback is RSB filling.
Prevent SRSO-style hijacks of return predictions following IBPB, as the return
target predictor can be corrupted before the IBPB completes.
[ bp: Massage. ]
Signed-off-by: Johannes Wikner <kwikner@ethz.ch>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Pull random number generator updates from Jason Donenfeld:
"Originally I'd planned on sending each of the vDSO getrandom()
architecture ports to their respective arch trees. But as we started
to work on this, we found lots of interesting issues in the shared
code and infrastructure, the fixes for which the various archs needed
to base their work.
So in the end, this turned into a nice collaborative effort fixing up
issues and porting to 5 new architectures -- arm64, powerpc64,
powerpc32, s390x, and loongarch64 -- with everybody pitching in and
commenting on each other's code. It was a fun development cycle.
This contains:
- Numerous fixups to the vDSO selftest infrastructure, getting it
running successfully on more platforms, and fixing bugs in it.
- Additions to the vDSO getrandom & chacha selftests. Basically every
time manual review unearthed a bug in a revision of an arch patch,
or an ambiguity, the tests were augmented.
By the time the last arch was submitted for review, s390x, v1 of
the series was essentially fine right out of the gate.
- Fixes to the the generic C implementation of vDSO getrandom, to
build and run successfully on all archs, decoupling it from
assumptions we had (unintentionally) made on x86_64 that didn't
carry through to the other architectures.
- Port of vDSO getrandom to LoongArch64, from Xi Ruoyao and acked by
Huacai Chen.
- Port of vDSO getrandom to ARM64, from Adhemerval Zanella and acked
by Will Deacon.
- Port of vDSO getrandom to PowerPC, in both 32-bit and 64-bit
varieties, from Christophe Leroy and acked by Michael Ellerman.
- Port of vDSO getrandom to S390X from Heiko Carstens, the arch
maintainer.
While it'd be natural for there to be things to fix up over the course
of the development cycle, these patches got a decent amount of review
from a fairly diverse crew of folks on the mailing lists, and, for the
most part, they've been cooking in linux-next, which has been helpful
for ironing out build issues.
In terms of architectures, I think that mostly takes care of the
important 64-bit archs with hardware still being produced and running
production loads in settings where vDSO getrandom is likely to help.
Arguably there's still RISC-V left, and we'll see for 6.13 whether
they find it useful and submit a port"
* tag 'random-6.12-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (47 commits)
selftests: vDSO: check cpu caps before running chacha test
s390/vdso: Wire up getrandom() vdso implementation
s390/vdso: Move vdso symbol handling to separate header file
s390/vdso: Allow alternatives in vdso code
s390/module: Provide find_section() helper
s390/facility: Let test_facility() generate static branch if possible
s390/alternatives: Remove ALT_FACILITY_EARLY
s390/facility: Disable compile time optimization for decompressor code
selftests: vDSO: fix vdso_config for s390
selftests: vDSO: fix ELF hash table entry size for s390x
powerpc/vdso: Wire up getrandom() vDSO implementation on VDSO64
powerpc/vdso: Wire up getrandom() vDSO implementation on VDSO32
powerpc/vdso: Refactor CFLAGS for CVDSO build
powerpc/vdso32: Add crtsavres
mm: Define VM_DROPPABLE for powerpc/32
powerpc/vdso: Fix VDSO data access when running in a non-root time namespace
selftests: vDSO: don't include generated headers for chacha test
arm64: vDSO: Wire up getrandom() vDSO implementation
arm64: alternative: make alternative_has_cap_likely() VDSO compatible
selftests: vDSO: also test counter in vdso_test_chacha
...
Pull RCU updates from Neeraj Upadhyay:
"Context tracking:
- rename context tracking state related symbols and remove references
to "dynticks" in various context tracking state variables and
related helpers
- force context_tracking_enabled_this_cpu() to be inlined to avoid
leaving a noinstr section
CSD lock:
- enhance CSD-lock diagnostic reports
- add an API to provide an indication of ongoing CSD-lock stall
nocb:
- update and simplify RCU nocb code to handle (de-)offloading of
callbacks only for offline CPUs
- fix RT throttling hrtimer being armed from offline CPU
rcutorture:
- remove redundant rcu_torture_ops get_gp_completed fields
- add SRCU ->same_gp_state and ->get_comp_state functions
- add generic test for NUM_ACTIVE_*RCU_POLL* for testing RCU and SRCU
polled grace periods
- add CFcommon.arch for arch-specific Kconfig options
- print number of update types in rcu_torture_write_types()
- add rcutree.nohz_full_patience_delay testing to the TREE07 scenario
- add a stall_cpu_repeat module parameter to test repeated CPU stalls
- add argument to limit number of CPUs a guest OS can use in
torture.sh
rcustall:
- abbreviate RCU CPU stall warnings during CSD-lock stalls
- Allow dump_cpu_task() to be called without disabling preemption
- defer printing stall-warning backtrace when holding rcu_node lock
srcu:
- make SRCU gp seq wrap-around faster
- add KCSAN checks for concurrent updates to ->srcu_n_exp_nodelay and
->reschedule_count which are used in heuristics governing
auto-expediting of normal SRCU grace periods and
grace-period-state-machine delays
- mark idle SRCU-barrier callbacks to help identify stuck
SRCU-barrier callback
rcu tasks:
- remove RCU Tasks Rude asynchronous APIs as they are no longer used
- stop testing RCU Tasks Rude asynchronous APIs
- fix access to non-existent percpu regions
- check processor-ID assumptions during chosen CPU calculation for
callback enqueuing
- update description of rtp->tasks_gp_seq grace-period sequence
number
- add rcu_barrier_cb_is_done() to identify whether a given
rcu_barrier callback is stuck
- mark idle Tasks-RCU-barrier callbacks
- add *torture_stats_print() functions to print detailed diagnostics
for Tasks-RCU variants
- capture start time of rcu_barrier_tasks*() operation to help
distinguish a hung barrier operation from a long series of barrier
operations
refscale:
- add a TINY scenario to support tests of Tiny RCU and Tiny
SRCU
- optimize process_durations() operation
rcuscale:
- dump stacks of stalled rcu_scale_writer() instances and
grace-period statistics when rcu_scale_writer() stalls
- mark idle RCU-barrier callbacks to identify stuck RCU-barrier
callbacks
- print detailed grace-period and barrier diagnostics on
rcu_scale_writer() hangs for Tasks-RCU variants
- warn if async module parameter is specified for RCU implementations
that do not have async primitives such as RCU Tasks Rude
- make all writer tasks report upon hang
- tolerate repeated GFP_KERNEL failure in rcu_scale_writer()
- use special allocator for rcu_scale_writer()
- NULL out top-level pointers to heap memory to avoid double-free
bugs on modprobe failures
- maintain per-task instead of per-CPU callbacks count to avoid any
issues with migration of either tasks or callbacks
- constify struct ref_scale_ops
Fixes:
- use system_unbound_wq for kfree_rcu work to avoid disturbing
isolated CPUs
Misc:
- warn on unexpected rcu_state.srs_done_tail state
- better define "atomic" for list_replace_rcu() and
hlist_replace_rcu() routines
- annotate struct kvfree_rcu_bulk_data with __counted_by()"
* tag 'rcu.release.v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (90 commits)
rcu: Defer printing stall-warning backtrace when holding rcu_node lock
rcu/nocb: Remove superfluous memory barrier after bypass enqueue
rcu/nocb: Conditionally wake up rcuo if not already waiting on GP
rcu/nocb: Fix RT throttling hrtimer armed from offline CPU
rcu/nocb: Simplify (de-)offloading state machine
context_tracking: Tag context_tracking_enabled_this_cpu() __always_inline
context_tracking, rcu: Rename rcu_dyntick trace event into rcu_watching
rcu: Update stray documentation references to rcu_dynticks_eqs_{enter, exit}()
rcu: Rename rcu_momentary_dyntick_idle() into rcu_momentary_eqs()
rcu: Rename rcu_implicit_dynticks_qs() into rcu_watching_snap_recheck()
rcu: Rename dyntick_save_progress_counter() into rcu_watching_snap_save()
rcu: Rename struct rcu_data .exp_dynticks_snap into .exp_watching_snap
rcu: Rename struct rcu_data .dynticks_snap into .watching_snap
rcu: Rename rcu_dynticks_zero_in_eqs() into rcu_watching_zero_in_eqs()
rcu: Rename rcu_dynticks_in_eqs_since() into rcu_watching_snap_stopped_since()
rcu: Rename rcu_dynticks_in_eqs() into rcu_watching_snap_in_eqs()
rcu: Rename rcu_dynticks_eqs_online() into rcu_watching_online()
context_tracking, rcu: Rename rcu_dynticks_curr_cpu_in_eqs() into rcu_is_watching_curr_cpu()
context_tracking, rcu: Rename rcu_dynticks_task*() into rcu_task*()
refscale: Constify struct ref_scale_ops
...
Without a prototype, we'll have to add a prototype for each architecture
implementing vDSO getrandom. As most architectures will likely have the
vDSO getrandom implemented in a near future, and we'd like to keep the
declarations compatible everywhere (to ease the libc implementor work),
we should really just have one copy of the prototype.
This also is what's already done inside of include/vdso/gettime.h for
those vDSO functions, so this continues that convention.
Suggested-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Acked-by: Huacai Chen <chenhuacai@kernel.org>
[Jason: rewrite docbook comment for prototype.]
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
_vdso_data is specific to x86 and __arch_get_k_vdso_data() is provided
so that all architectures can provide the requested pointer.
Do the same with _vdso_rng_data, provide __arch_get_k_vdso_rng_data()
and don't use x86 _vdso_rng_data directly.
Until now vdso/vsyscall.h was only included by time/vsyscall.c but now
it will also be included in char/random.c, leading to a duplicate
declaration of _vdso_data and _vdso_rng_data.
To fix this issue, move the declaration in a C file. vma.c looks like
the most appropriate candidate. We don't need to replace the definitions
in vsyscall.h by declarations as declarations are already in asm/vvar.h.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Despite multiple attempts to get the syscall number assignment right
for the newly added uretprobe syscall, we ended up with a bit of a mess:
- The number is defined as 467 based on the assumption that the
xattrat family of syscalls would use 463 through 466, but those
did not make it into 6.11.
- The include/uapi/asm-generic/unistd.h file still lists the number
463, but the new scripts/syscall.tbl that was supposed to have the
same data lists 467 instead as the number for arc, arm64, csky,
hexagon, loongarch, nios2, openrisc and riscv. None of these
architectures actually provide a uretprobe syscall.
- All the other architectures (powerpc, arm, mips, ...) don't list
this syscall at all.
There are two ways to make it consistent again: either list it with
the same syscall number on all architectures, or only list it on x86
but not in scripts/syscall.tbl and asm-generic/unistd.h.
Based on the most recent discussion, it seems like we won't need it
anywhere else, so just remove the inconsistent assignment and instead
move the x86 number to the next available one in the architecture
specific range, which is 335.
Fixes: 5c28424e9a ("syscalls: Fix to add sys_uretprobe to syscall.tbl")
Fixes: 190fec72df ("uprobe: Wire up uretprobe system call")
Fixes: 63ded11097 ("uprobe: Change uretprobe syscall scope and number")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Context tracking state related symbols currently use a mix of the
CONTEXT_ (e.g. CONTEXT_KERNEL) and CT_SATE_ (e.g. CT_STATE_MASK) prefixes.
Clean up the naming and make the ctx_state enum use the CT_STATE_ prefix.
Suggested-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
Pull random number generator updates from Jason Donenfeld:
"This adds getrandom() support to the vDSO.
First, it adds a new kind of mapping to mmap(2), MAP_DROPPABLE, which
lets the kernel zero out pages anytime under memory pressure, which
enables allocating memory that never gets swapped to disk but also
doesn't count as being mlocked.
Then, the vDSO implementation of getrandom() is introduced in a
generic manner and hooked into random.c.
Next, this is implemented on x86. (Also, though it's not ready for
this pull, somebody has begun an arm64 implementation already)
Finally, two vDSO selftests are added.
There are also two housekeeping cleanup commits"
* tag 'random-6.11-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
MAINTAINERS: add random.h headers to RNG subsection
random: note that RNDGETPOOL was removed in 2.6.9-rc2
selftests/vDSO: add tests for vgetrandom
x86: vdso: Wire up getrandom() vDSO implementation
random: introduce generic vDSO getrandom() implementation
mm: add MAP_DROPPABLE for designating always lazily freeable mappings
Hook up the generic vDSO implementation to the x86 vDSO data page. Since
the existing vDSO infrastructure is heavily based on the timekeeping
functionality, which works over arrays of bases, a new macro is
introduced for vvars that are not arrays.
The vDSO function requires a ChaCha20 implementation that does not write
to the stack, yet can still do an entire ChaCha20 permutation, so
provide this using SSE2, since this is userland code that must work on
all x86-64 processors.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Samuel Neves <sneves@dei.uc.pt> # for vgetrandom-chacha.S
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Pull probes updates from Masami Hiramatsu:
"Uprobes:
- x86/shstk: Make return uprobe work with shadow stack
- Add uretprobe syscall which speeds up the uretprobe 10-30% faster.
This syscall is automatically used from user-space trampolines
which are generated by the uretprobe. If this syscall is used by
normal user program, it will cause SIGILL. Note that this is
currently only implemented on x86_64.
(This also has two fixes for adjusting the syscall number to avoid
conflict with new *attrat syscalls.)
- uprobes/perf: fix user stack traces in the presence of pending
uretprobe. This corrects the uretprobe's trampoline address in the
stacktrace with correct return address
- selftests/x86: Add a return uprobe with shadow stack test
- selftests/bpf: Add uretprobe syscall related tests.
- test case for register integrity check
- test case with register changing case
- test case for uretprobe syscall without uprobes (expected to fail)
- test case for uretprobe with shadow stack
- selftests/bpf: add test validating uprobe/uretprobe stack traces
- MAINTAINERS: Add uprobes entry. This does not specify the tree but
to clarify who maintains and reviews the uprobes
Kprobes:
- tracing/kprobes: Test case cleanups.
Replace redundant WARN_ON_ONCE() + pr_warn() with WARN_ONCE() and
remove unnecessary code from selftest
- tracing/kprobes: Add symbol counting check when module loads.
This checks the uniqueness of the probed symbol on modules. The
same check has already done for kernel symbols
(This also has a fix for build error with CONFIG_MODULES=n)
Cleanup:
- Add MODULE_DESCRIPTION() macros for fprobe and kprobe examples"
* tag 'probes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
MAINTAINERS: Add uprobes entry
selftests/bpf: Change uretprobe syscall number in uprobe_syscall test
uprobe: Change uretprobe syscall scope and number
tracing/kprobes: Fix build error when find_module() is not available
tracing/kprobes: Add symbol counting check when module loads
selftests/bpf: add test validating uprobe/uretprobe stack traces
perf,uprobes: fix user stack traces in the presence of pending uretprobes
tracing/kprobe: Remove cleanup code unrelated to selftest
tracing/kprobe: Integrate test warnings into WARN_ONCE
selftests/bpf: Add uretprobe shadow stack test
selftests/bpf: Add uretprobe syscall call from user space test
selftests/bpf: Add uretprobe syscall test for regs changes
selftests/bpf: Add uretprobe syscall test for regs integrity
selftests/x86: Add return uprobe shadow stack test
uprobe: Add uretprobe syscall to speed up return probe
uprobe: Wire up uretprobe system call
x86/shstk: Make return uprobe work with shadow stack
samples: kprobes: add missing MODULE_DESCRIPTION() macros
fprobe: add missing MODULE_DESCRIPTION() macro
Pull x86 cpu mitigation updates from Borislav Petkov:
- Add a spectre_bhi=vmexit mitigation option aimed at cloud
environments
- Remove duplicated Spectre cmdline option documentation
- Add separate macro definitions for syscall handlers which do not
return in order to address objtool warnings
* tag 'x86_bugs_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Add 'spectre_bhi=vmexit' cmdline option
x86/bugs: Remove duplicate Spectre cmdline option descriptions
x86/syscall: Mark exit[_group] syscall handlers __noreturn
Pull misc x86 updates from Borislav Petkov:
- Make error checking of AMD SMN accesses more robust in the callers as
they're the only ones who can interpret the results properly
- The usual cleanups and fixes, left and right
* tag 'x86_misc_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kmsan: Fix hook for unaligned accesses
x86/platform/iosf_mbi: Convert PCIBIOS_* return codes to errnos
x86/pci/xen: Fix PCIBIOS_* return code handling
x86/pci/intel_mid_pci: Fix PCIBIOS_* return code handling
x86/of: Return consistent error type from x86_of_pci_irq_enable()
hwmon: (k10temp) Rename _data variable
hwmon: (k10temp) Remove unused HAVE_TDIE() macro
hwmon: (k10temp) Reduce k10temp_get_ccd_support() parameters
hwmon: (k10temp) Define a helper function to read CCD temperature
x86/amd_nb: Enhance SMN access error checking
hwmon: (k10temp) Check return value of amd_smn_read()
EDAC/amd64: Check return value of amd_smn_read()
EDAC/amd64: Remove unused register accesses
tools/x86/kcpuid: Add missing dir via Makefile
x86, arm: Add missing license tag to syscall tables files
When BHI mitigation is enabled, if SYSENTER is invoked with the TF flag set
then entry_SYSENTER_compat() uses CLEAR_BRANCH_HISTORY and calls the
clear_bhb_loop() before the TF flag is cleared. This causes the #DB handler
(exc_debug_kernel()) to issue a warning because single-step is used outside the
entry_SYSENTER_compat() function.
To address this issue, entry_SYSENTER_compat() should use CLEAR_BRANCH_HISTORY
after making sure the TF flag is cleared.
The problem can be reproduced with the following sequence:
$ cat sysenter_step.c
int main()
{ asm("pushf; pop %ax; bts $8,%ax; push %ax; popf; sysenter"); }
$ gcc -o sysenter_step sysenter_step.c
$ ./sysenter_step
Segmentation fault (core dumped)
The program is expected to crash, and the #DB handler will issue a warning.
Kernel log:
WARNING: CPU: 27 PID: 7000 at arch/x86/kernel/traps.c:1009 exc_debug_kernel+0xd2/0x160
...
RIP: 0010:exc_debug_kernel+0xd2/0x160
...
Call Trace:
<#DB>
? show_regs+0x68/0x80
? __warn+0x8c/0x140
? exc_debug_kernel+0xd2/0x160
? report_bug+0x175/0x1a0
? handle_bug+0x44/0x90
? exc_invalid_op+0x1c/0x70
? asm_exc_invalid_op+0x1f/0x30
? exc_debug_kernel+0xd2/0x160
exc_debug+0x43/0x50
asm_exc_debug+0x1e/0x40
RIP: 0010:clear_bhb_loop+0x0/0xb0
...
</#DB>
<TASK>
? entry_SYSENTER_compat_after_hwframe+0x6e/0x8d
</TASK>
[ bp: Massage commit message. ]
Fixes: 7390db8aea ("x86/bhi: Add support for clearing branch history at syscall entry")
Reported-by: Suman Maity <suman.m.maity@oracle.com>
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20240524070459.3674025-1-alexandre.chartre@oracle.com
Using sys_io_pgetevents() as the entry point for compat mode tasks
works almost correctly, but misses the sign extension for the min_nr
and nr arguments.
This was addressed on parisc by switching to
compat_sys_io_pgetevents_time64() in commit 6431e92fc8 ("parisc:
io_pgetevents_time64() needs compat syscall in 32-bit compat mode"),
as well as by using more sophisticated system call wrappers on x86 and
s390. However, arm64, mips, powerpc, sparc and riscv still have the
same bug.
Change all of them over to use compat_sys_io_pgetevents_time64()
like parisc already does. This was clearly the intention when the
function was originally added, but it got hooked up incorrectly in
the tables.
Cc: stable@vger.kernel.org
Fixes: 48166e6ea4 ("y2038: add 64-bit time_t syscalls to all 32-bit architectures")
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Patch series "Introduce mseal", v10.
This patchset proposes a new mseal() syscall for the Linux kernel.
In a nutshell, mseal() protects the VMAs of a given virtual memory range
against modifications, such as changes to their permission bits.
Modern CPUs support memory permissions, such as the read/write (RW) and
no-execute (NX) bits. Linux has supported NX since the release of kernel
version 2.6.8 in August 2004 [1]. The memory permission feature improves
the security stance on memory corruption bugs, as an attacker cannot
simply write to arbitrary memory and point the code to it. The memory
must be marked with the X bit, or else an exception will occur.
Internally, the kernel maintains the memory permissions in a data
structure called VMA (vm_area_struct). mseal() additionally protects the
VMA itself against modifications of the selected seal type.
Memory sealing is useful to mitigate memory corruption issues where a
corrupted pointer is passed to a memory management system. For example,
such an attacker primitive can break control-flow integrity guarantees
since read-only memory that is supposed to be trusted can become writable
or .text pages can get remapped. Memory sealing can automatically be
applied by the runtime loader to seal .text and .rodata pages and
applications can additionally seal security critical data at runtime. A
similar feature already exists in the XNU kernel with the
VM_FLAGS_PERMANENT [3] flag and on OpenBSD with the mimmutable syscall
[4]. Also, Chrome wants to adopt this feature for their CFI work [2] and
this patchset has been designed to be compatible with the Chrome use case.
Two system calls are involved in sealing the map: mmap() and mseal().
The new mseal() is an syscall on 64 bit CPU, and with following signature:
int mseal(void addr, size_t len, unsigned long flags)
addr/len: memory range.
flags: reserved.
mseal() blocks following operations for the given memory range.
1> Unmapping, moving to another location, and shrinking the size,
via munmap() and mremap(), can leave an empty space, therefore can
be replaced with a VMA with a new set of attributes.
2> Moving or expanding a different VMA into the current location,
via mremap().
3> Modifying a VMA via mmap(MAP_FIXED).
4> Size expansion, via mremap(), does not appear to pose any specific
risks to sealed VMAs. It is included anyway because the use case is
unclear. In any case, users can rely on merging to expand a sealed VMA.
5> mprotect() and pkey_mprotect().
6> Some destructive madvice() behaviors (e.g. MADV_DONTNEED) for anonymous
memory, when users don't have write permission to the memory. Those
behaviors can alter region contents by discarding pages, effectively a
memset(0) for anonymous memory.
The idea that inspired this patch comes from Stephen Röttger’s work in
V8 CFI [5]. Chrome browser in ChromeOS will be the first user of this
API.
Indeed, the Chrome browser has very specific requirements for sealing,
which are distinct from those of most applications. For example, in the
case of libc, sealing is only applied to read-only (RO) or read-execute
(RX) memory segments (such as .text and .RELRO) to prevent them from
becoming writable, the lifetime of those mappings are tied to the lifetime
of the process.
Chrome wants to seal two large address space reservations that are managed
by different allocators. The memory is mapped RW- and RWX respectively
but write access to it is restricted using pkeys (or in the future ARM
permission overlay extensions). The lifetime of those mappings are not
tied to the lifetime of the process, therefore, while the memory is
sealed, the allocators still need to free or discard the unused memory.
For example, with madvise(DONTNEED).
However, always allowing madvise(DONTNEED) on this range poses a security
risk. For example if a jump instruction crosses a page boundary and the
second page gets discarded, it will overwrite the target bytes with zeros
and change the control flow. Checking write-permission before the discard
operation allows us to control when the operation is valid. In this case,
the madvise will only succeed if the executing thread has PKEY write
permissions and PKRU changes are protected in software by control-flow
integrity.
Although the initial version of this patch series is targeting the Chrome
browser as its first user, it became evident during upstream discussions
that we would also want to ensure that the patch set eventually is a
complete solution for memory sealing and compatible with other use cases.
The specific scenario currently in mind is glibc's use case of loading and
sealing ELF executables. To this end, Stephen is working on a change to
glibc to add sealing support to the dynamic linker, which will seal all
non-writable segments at startup. Once this work is completed, all
applications will be able to automatically benefit from these new
protections.
In closing, I would like to formally acknowledge the valuable
contributions received during the RFC process, which were instrumental in
shaping this patch:
Jann Horn: raising awareness and providing valuable insights on the
destructive madvise operations.
Liam R. Howlett: perf optimization.
Linus Torvalds: assisting in defining system call signature and scope.
Theo de Raadt: sharing the experiences and insight gained from
implementing mimmutable() in OpenBSD.
MM perf benchmarks
==================
This patch adds a loop in the mprotect/munmap/madvise(DONTNEED) to
check the VMAs’ sealing flag, so that no partial update can be made,
when any segment within the given memory range is sealed.
To measure the performance impact of this loop, two tests are developed.
[8]
The first is measuring the time taken for a particular system call,
by using clock_gettime(CLOCK_MONOTONIC). The second is using
PERF_COUNT_HW_REF_CPU_CYCLES (exclude user space). Both tests have
similar results.
The tests have roughly below sequence:
for (i = 0; i < 1000, i++)
create 1000 mappings (1 page per VMA)
start the sampling
for (j = 0; j < 1000, j++)
mprotect one mapping
stop and save the sample
delete 1000 mappings
calculates all samples.
Below tests are performed on Intel(R) Pentium(R) Gold 7505 @ 2.00GHz,
4G memory, Chromebook.
Based on the latest upstream code:
The first test (measuring time)
syscall__ vmas t t_mseal delta_ns per_vma %
munmap__ 1 909 944 35 35 104%
munmap__ 2 1398 1502 104 52 107%
munmap__ 4 2444 2594 149 37 106%
munmap__ 8 4029 4323 293 37 107%
munmap__ 16 6647 6935 288 18 104%
munmap__ 32 11811 12398 587 18 105%
mprotect 1 439 465 26 26 106%
mprotect 2 1659 1745 86 43 105%
mprotect 4 3747 3889 142 36 104%
mprotect 8 6755 6969 215 27 103%
mprotect 16 13748 14144 396 25 103%
mprotect 32 27827 28969 1142 36 104%
madvise_ 1 240 262 22 22 109%
madvise_ 2 366 442 76 38 121%
madvise_ 4 623 751 128 32 121%
madvise_ 8 1110 1324 215 27 119%
madvise_ 16 2127 2451 324 20 115%
madvise_ 32 4109 4642 534 17 113%
The second test (measuring cpu cycle)
syscall__ vmas cpu cmseal delta_cpu per_vma %
munmap__ 1 1790 1890 100 100 106%
munmap__ 2 2819 3033 214 107 108%
munmap__ 4 4959 5271 312 78 106%
munmap__ 8 8262 8745 483 60 106%
munmap__ 16 13099 14116 1017 64 108%
munmap__ 32 23221 24785 1565 49 107%
mprotect 1 906 967 62 62 107%
mprotect 2 3019 3203 184 92 106%
mprotect 4 6149 6569 420 105 107%
mprotect 8 9978 10524 545 68 105%
mprotect 16 20448 21427 979 61 105%
mprotect 32 40972 42935 1963 61 105%
madvise_ 1 434 497 63 63 115%
madvise_ 2 752 899 147 74 120%
madvise_ 4 1313 1513 200 50 115%
madvise_ 8 2271 2627 356 44 116%
madvise_ 16 4312 4883 571 36 113%
madvise_ 32 8376 9319 943 29 111%
Based on the result, for 6.8 kernel, sealing check adds
20-40 nano seconds, or around 50-100 CPU cycles, per VMA.
In addition, I applied the sealing to 5.10 kernel:
The first test (measuring time)
syscall__ vmas t tmseal delta_ns per_vma %
munmap__ 1 357 390 33 33 109%
munmap__ 2 442 463 21 11 105%
munmap__ 4 614 634 20 5 103%
munmap__ 8 1017 1137 120 15 112%
munmap__ 16 1889 2153 263 16 114%
munmap__ 32 4109 4088 -21 -1 99%
mprotect 1 235 227 -7 -7 97%
mprotect 2 495 464 -30 -15 94%
mprotect 4 741 764 24 6 103%
mprotect 8 1434 1437 2 0 100%
mprotect 16 2958 2991 33 2 101%
mprotect 32 6431 6608 177 6 103%
madvise_ 1 191 208 16 16 109%
madvise_ 2 300 324 24 12 108%
madvise_ 4 450 473 23 6 105%
madvise_ 8 753 806 53 7 107%
madvise_ 16 1467 1592 125 8 108%
madvise_ 32 2795 3405 610 19 122%
The second test (measuring cpu cycle)
syscall__ nbr_vma cpu cmseal delta_cpu per_vma %
munmap__ 1 684 715 31 31 105%
munmap__ 2 861 898 38 19 104%
munmap__ 4 1183 1235 51 13 104%
munmap__ 8 1999 2045 46 6 102%
munmap__ 16 3839 3816 -23 -1 99%
munmap__ 32 7672 7887 216 7 103%
mprotect 1 397 443 46 46 112%
mprotect 2 738 788 50 25 107%
mprotect 4 1221 1256 35 9 103%
mprotect 8 2356 2429 72 9 103%
mprotect 16 4961 4935 -26 -2 99%
mprotect 32 9882 10172 291 9 103%
madvise_ 1 351 380 29 29 108%
madvise_ 2 565 615 49 25 109%
madvise_ 4 872 933 61 15 107%
madvise_ 8 1508 1640 132 16 109%
madvise_ 16 3078 3323 245 15 108%
madvise_ 32 5893 6704 811 25 114%
For 5.10 kernel, sealing check adds 0-15 ns in time, or 10-30
CPU cycles, there is even decrease in some cases.
It might be interesting to compare 5.10 and 6.8 kernel
The first test (measuring time)
syscall__ vmas t_5_10 t_6_8 delta_ns per_vma %
munmap__ 1 357 909 552 552 254%
munmap__ 2 442 1398 956 478 316%
munmap__ 4 614 2444 1830 458 398%
munmap__ 8 1017 4029 3012 377 396%
munmap__ 16 1889 6647 4758 297 352%
munmap__ 32 4109 11811 7702 241 287%
mprotect 1 235 439 204 204 187%
mprotect 2 495 1659 1164 582 335%
mprotect 4 741 3747 3006 752 506%
mprotect 8 1434 6755 5320 665 471%
mprotect 16 2958 13748 10790 674 465%
mprotect 32 6431 27827 21397 669 433%
madvise_ 1 191 240 49 49 125%
madvise_ 2 300 366 67 33 122%
madvise_ 4 450 623 173 43 138%
madvise_ 8 753 1110 357 45 147%
madvise_ 16 1467 2127 660 41 145%
madvise_ 32 2795 4109 1314 41 147%
The second test (measuring cpu cycle)
syscall__ vmas cpu_5_10 c_6_8 delta_cpu per_vma %
munmap__ 1 684 1790 1106 1106 262%
munmap__ 2 861 2819 1958 979 327%
munmap__ 4 1183 4959 3776 944 419%
munmap__ 8 1999 8262 6263 783 413%
munmap__ 16 3839 13099 9260 579 341%
munmap__ 32 7672 23221 15549 486 303%
mprotect 1 397 906 509 509 228%
mprotect 2 738 3019 2281 1140 409%
mprotect 4 1221 6149 4929 1232 504%
mprotect 8 2356 9978 7622 953 423%
mprotect 16 4961 20448 15487 968 412%
mprotect 32 9882 40972 31091 972 415%
madvise_ 1 351 434 82 82 123%
madvise_ 2 565 752 186 93 133%
madvise_ 4 872 1313 442 110 151%
madvise_ 8 1508 2271 763 95 151%
madvise_ 16 3078 4312 1234 77 140%
madvise_ 32 5893 8376 2483 78 142%
From 5.10 to 6.8
munmap: added 250-550 ns in time, or 500-1100 in cpu cycle, per vma.
mprotect: added 200-750 ns in time, or 500-1200 in cpu cycle, per vma.
madvise: added 33-50 ns in time, or 70-110 in cpu cycle, per vma.
In comparison to mseal, which adds 20-40 ns or 50-100 CPU cycles, the
increase from 5.10 to 6.8 is significantly larger, approximately ten times
greater for munmap and mprotect.
When I discuss the mm performance with Brian Makin, an engineer who worked
on performance, it was brought to my attention that such performance
benchmarks, which measuring millions of mm syscall in a tight loop, may
not accurately reflect real-world scenarios, such as that of a database
service. Also this is tested using a single HW and ChromeOS, the data
from another HW or distribution might be different. It might be best to
take this data with a grain of salt.
This patch (of 5):
Wire up mseal syscall for all architectures.
Link: https://lkml.kernel.org/r/20240415163527.626541-1-jeffxu@chromium.org
Link: https://lkml.kernel.org/r/20240415163527.626541-2-jeffxu@chromium.org
Signed-off-by: Jeff Xu <jeffxu@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Jann Horn <jannh@google.com> [Bug #2]
Cc: Jeff Xu <jeffxu@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Jorge Lucangeli Obes <jorgelo@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Cc: Stephen Röttger <sroettger@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Amer Al Shanawany <amer.shanawany@gmail.com>
Cc: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull Kbuild updates from Masahiro Yamada:
- Avoid 'constexpr', which is a keyword in C23
- Allow 'dtbs_check' and 'dt_compatible_check' run independently of
'dt_binding_check'
- Fix weak references to avoid GOT entries in position-independent code
generation
- Convert the last use of 'optional' property in arch/sh/Kconfig
- Remove support for the 'optional' property in Kconfig
- Remove support for Clang's ThinLTO caching, which does not work with
the .incbin directive
- Change the semantics of $(src) so it always points to the source
directory, which fixes Makefile inconsistencies between upstream and
downstream
- Fix 'make tar-pkg' for RISC-V to produce a consistent package
- Provide reasonable default coverage for objtool, sanitizers, and
profilers
- Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc.
- Remove the last use of tristate choice in drivers/rapidio/Kconfig
- Various cleanups and fixes in Kconfig
* tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (46 commits)
kconfig: use sym_get_choice_menu() in sym_check_prop()
rapidio: remove choice for enumeration
kconfig: lxdialog: remove initialization with A_NORMAL
kconfig: m/nconf: merge two item_add_str() calls
kconfig: m/nconf: remove dead code to display value of bool choice
kconfig: m/nconf: remove dead code to display children of choice members
kconfig: gconf: show checkbox for choice correctly
kbuild: use GCOV_PROFILE and KCSAN_SANITIZE in scripts/Makefile.modfinal
Makefile: remove redundant tool coverage variables
kbuild: provide reasonable defaults for tool coverage
modules: Drop the .export_symbol section from the final modules
kconfig: use menu_list_for_each_sym() in sym_check_choice_deps()
kconfig: use sym_get_choice_menu() in conf_write_defconfig()
kconfig: add sym_get_choice_menu() helper
kconfig: turn defaults and additional prompt for choice members into error
kconfig: turn missing prompt for choice members into error
kconfig: turn conf_choice() into void function
kconfig: use linked list in sym_set_changed()
kconfig: gconf: use MENU_CHANGED instead of SYMBOL_CHANGED
kconfig: gconf: remove debug code
...
Pull x86 interrupt handling updates from Thomas Gleixner:
"Add support for posted interrupts on bare metal.
Posted interrupts is a virtualization feature which allows to inject
interrupts directly into a guest without host interaction. The VT-d
interrupt remapping hardware sets the bit which corresponds to the
interrupt vector in a vector bitmap which is either used to inject the
interrupt directly into the guest via a virtualized APIC or in case
that the guest is scheduled out provides a host side notification
interrupt which informs the host that an interrupt has been marked
pending in the bitmap.
This can be utilized on bare metal for scenarios where multiple
devices, e.g. NVME storage, raise interrupts with a high frequency. In
the default mode these interrupts are handles independently and
therefore require a full roundtrip of interrupt entry/exit.
Utilizing posted interrupts this roundtrip overhead can be avoided by
coalescing these interrupt entries to a single entry for the posted
interrupt notification. The notification interrupt then demultiplexes
the pending bits in a memory based bitmap and invokes the
corresponding device specific handlers.
Depending on the usage scenario and device utilization throughput
improvements between 10% and 130% have been measured.
As this is only relevant for high end servers with multiple device
queues per CPU attached and counterproductive for situations where
interrupts are arriving at distinct times, the functionality is opt-in
via a kernel command line parameter"
* tag 'x86-irq-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/irq: Use existing helper for pending vector check
iommu/vt-d: Enable posted mode for device MSIs
iommu/vt-d: Make posted MSI an opt-in command line option
x86/irq: Extend checks for pending vectors to posted interrupts
x86/irq: Factor out common code for checking pending interrupts
x86/irq: Install posted MSI notification handler
x86/irq: Factor out handler invocation from common_interrupt()
x86/irq: Set up per host CPU posted interrupt descriptors
x86/irq: Reserve a per CPU IDT vector for posted MSIs
x86/irq: Add a Kconfig option for posted MSI
x86/irq: Remove bitfields in posted interrupt descriptor
x86/irq: Unionize PID.PIR for 64bit access w/o casting
KVM: VMX: Move posted interrupt descriptor out of VMX code
Now Kbuild provides reasonable defaults for objtool, sanitizers, and
profilers.
Remove redundant variables.
Note:
This commit changes the coverage for some objects:
- include arch/mips/vdso/vdso-image.o into UBSAN, GCOV, KCOV
- include arch/sparc/vdso/vdso-image-*.o into UBSAN
- include arch/sparc/vdso/vma.o into UBSAN
- include arch/x86/entry/vdso/extable.o into KASAN, KCSAN, UBSAN, GCOV, KCOV
- include arch/x86/entry/vdso/vdso-image-*.o into KASAN, KCSAN, UBSAN, GCOV, KCOV
- include arch/x86/entry/vdso/vdso32-setup.o into KASAN, KCSAN, UBSAN, GCOV, KCOV
- include arch/x86/entry/vdso/vma.o into GCOV, KCOV
- include arch/x86/um/vdso/vma.o into KASAN, GCOV, KCOV
I believe these are positive effects because all of them are kernel
space objects.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Roberto Sassu <roberto.sassu@huawei.com>
Pull x86 shadow stacks from Ingo Molnar:
"Enable shadow stacks for x32.
While we normally don't do such feature-enabling for 32-bit anymore,
this change is small, straightforward & tested on upstream glibc"
* tag 'x86-shstk-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/shstk: Enable shadow stacks for x32
Pull x86 entry cleanup from Ingo Molnar:
- Merge thunk_64.S and thunk_32.S into thunk.S
* tag 'x86-entry-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry: Merge thunk_64.S and thunk_32.S into thunk.S
Pull x86 cleanups from Ingo Molnar:
- Fix function prototypes to address clang function type cast
warnings in the math-emu code
- Reorder definitions in <asm/msr-index.h>
- Remove unused code
- Fix typos
- Simplify #include sections
* tag 'x86-cleanups-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/pci/ce4100: Remove unused 'struct sim_reg_op'
x86/msr: Move ARCH_CAP_XAPIC_DISABLE bit definition to its rightful place
x86/math-emu: Fix function cast warnings
x86/extable: Remove unused fixup type EX_TYPE_COPY
x86/rtc: Remove unused intel-mid.h
x86/32: Remove unused IA32_STACK_TOP and two externs
x86/head: Simplify relative include path to xen-head.S
x86/fred: Fix typo in Kconfig description
x86/syscall/compat: Remove ia32_unistd.h
x86/syscall/compat: Remove unused macro __SYSCALL_ia32_NR
x86/virt/tdx: Remove duplicate include
x86/xen: Remove duplicate #include
Kbuild conventionally uses $(obj)/ for generated files, and $(src)/ for
checked-in source files. It is merely a convention without any functional
difference. In fact, $(obj) and $(src) are exactly the same, as defined
in scripts/Makefile.build:
src := $(obj)
When the kernel is built in a separate output directory, $(src) does
not accurately reflect the source directory location. While Kbuild
resolves this discrepancy by specifying VPATH=$(srctree) to search for
source files, it does not cover all cases. For example, when adding a
header search path for local headers, -I$(srctree)/$(src) is typically
passed to the compiler.
This introduces inconsistency between upstream and downstream Makefiles
because $(src) is used instead of $(srctree)/$(src) for the latter.
To address this inconsistency, this commit changes the semantics of
$(src) so that it always points to the directory in the source tree.
Going forward, the variables used in Makefiles will have the following
meanings:
$(obj) - directory in the object tree
$(src) - directory in the source tree (changed by this commit)
$(objtree) - the top of the kernel object tree
$(srctree) - the top of the kernel source tree
Consequently, $(srctree)/$(src) in upstream Makefiles need to be replaced
with $(src).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
The syzbot-reported stack trace from hell in this discussion thread
actually has three nested page faults:
https://lore.kernel.org/r/000000000000d5f4fc0616e816d4@google.com
... and I think that's actually the important thing here:
- the first page fault is from user space, and triggers the vsyscall
emulation.
- the second page fault is from __do_sys_gettimeofday(), and that should
just have caused the exception that then sets the return value to
-EFAULT
- the third nested page fault is due to _raw_spin_unlock_irqrestore() ->
preempt_schedule() -> trace_sched_switch(), which then causes a BPF
trace program to run, which does that bpf_probe_read_compat(), which
causes that page fault under pagefault_disable().
It's quite the nasty backtrace, and there's a lot going on.
The problem is literally the vsyscall emulation, which sets
current->thread.sig_on_uaccess_err = 1;
and that causes the fixup_exception() code to send the signal *despite* the
exception being caught.
And I think that is in fact completely bogus. It's completely bogus
exactly because it sends that signal even when it *shouldn't* be sent -
like for the BPF user mode trace gathering.
In other words, I think the whole "sig_on_uaccess_err" thing is entirely
broken, because it makes any nested page-faults do all the wrong things.
Now, arguably, I don't think anybody should enable vsyscall emulation any
more, but this test case clearly does.
I think we should just make the "send SIGSEGV" be something that the
vsyscall emulation does on its own, not this broken per-thread state for
something that isn't actually per thread.
The x86 page fault code actually tried to deal with the "incorrect nesting"
by having that:
if (in_interrupt())
return;
which ignores the sig_on_uaccess_err case when it happens in interrupts,
but as shown by this example, these nested page faults do not need to be
about interrupts at all.
IOW, I think the only right thing is to remove that horrendously broken
code.
The attached patch looks like the ObviouslyCorrect(tm) thing to do.
NOTE! This broken code goes back to this commit in 2011:
4fc3490114 ("x86-64: Set siginfo and context on vsyscall emulation faults")
... and back then the reason was to get all the siginfo details right.
Honestly, I do not for a moment believe that it's worth getting the siginfo
details right here, but part of the commit says:
This fixes issues with UML when vsyscall=emulate.
... and so my patch to remove this garbage will probably break UML in this
situation.
I do not believe that anybody should be running with vsyscall=emulate in
2024 in the first place, much less if you are doing things like UML. But
let's see if somebody screams.
Reported-and-tested-by: syzbot+83e7f982ca045ab4405c@syzkaller.appspotmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/CAHk-=wh9D6f7HUkDgZHKmDCHUQmp+Co89GP+b8+z+G56BKeyNg@mail.gmail.com
All MSI vectors are multiplexed into a single notification vector when
posted MSI is enabled. It is the responsibility of the notification vector
handler to demultiplex MSI vectors. In the handler the MSI vector handlers
are dispatched without IDT delivery for each pending MSI interrupt.
For example, the interrupt flow will change as follows:
(3 MSIs of different vectors arrive in a a high frequency burst)
BEFORE:
interrupt(MSI)
irq_enter()
handler() /* EOI */
irq_exit()
process_softirq()
interrupt(MSI)
irq_enter()
handler() /* EOI */
irq_exit()
process_softirq()
interrupt(MSI)
irq_enter()
handler() /* EOI */
irq_exit()
process_softirq()
AFTER:
interrupt /* Posted MSI notification vector */
irq_enter()
atomic_xchg(PIR)
handler()
handler()
handler()
pi_clear_on()
apic_eoi()
irq_exit()
process_softirq()
Except for the leading MSI, CPU notifications are skipped/coalesced.
For MSIs which arrive at a low frequency, the demultiplexing loop does not
wait for more interrupts to coalesce. Therefore, there's no additional
latency other than the processing time.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240423174114.526704-9-jacob.jun.pan@linux.intel.com
Add a FRED-specific INT80 handler and document why it differs from the
current one. Eventually, the common bits will be unified once FRED hw is
available and it turns out that no further changes are needed but for
now, keep the handlers separate for everyone's sanity's sake.
[ bp: Zap duplicated commit message, massage. ]
Fixes: 55617fb991 ("x86/entry: Do not allow external 0x80 interrupts")
Suggested-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240417174731.4189592-1-xin@zytor.com
Branch History Injection (BHI) attacks may allow a malicious application to
influence indirect branch prediction in kernel by poisoning the branch
history. eIBRS isolates indirect branch targets in ring0. The BHB can
still influence the choice of indirect branch predictor entry, and although
branch predictor entries are isolated between modes when eIBRS is enabled,
the BHB itself is not isolated between modes.
Alder Lake and new processors supports a hardware control BHI_DIS_S to
mitigate BHI. For older processors Intel has released a software sequence
to clear the branch history on parts that don't support BHI_DIS_S. Add
support to execute the software sequence at syscall entry and VMexit to
overwrite the branch history.
For now, branch history is not cleared at interrupt entry, as malicious
applications are not believed to have sufficient control over the
registers, since previous register state is cleared at interrupt
entry. Researchers continue to poke at this area and it may become
necessary to clear at interrupt entry as well in the future.
This mitigation is only defined here. It is enabled later.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Co-developed-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Make <asm/syscall.h> build a switch statement instead, and the compiler can
either decide to generate an indirect jump, or - more likely these days due
to mitigations - just a series of conditional branches.
Yes, the conditional branches also have branch prediction, but the branch
prediction is much more controlled, in that it just causes speculatively
running the wrong system call (harmless), rather than speculatively running
possibly wrong random less controlled code gadgets.
This doesn't mitigate other indirect calls, but the system call indirection
is the first and most easily triggered case.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
