[ Upstream commit da61439c63 ]
Make sure to drop the reference taken when looking up the EMC device and
its driver data on first set_rate().
Note that holding a reference to a device does not prevent its driver
data from going away so there is no point in keeping the reference.
Fixes: 2db04f16b5 ("clk: tegra: Add EMC clock driver")
Fixes: 6d6ef58c24 ("clk: tegra: tegra124-emc: Fix missing put_device() call in emc_ensure_emc_driver")
Cc: stable@vger.kernel.org # 4.2: 6d6ef58c24
Cc: Mikko Perttunen <mperttunen@nvidia.com>
Cc: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ec820fc28 ]
The 9FGV0841 has 8 outputs and registers 8 struct clk_hw, make sure
there are 8 slots for those newly registered clk_hw pointers, else
there is going to be out of bounds write when pointers 4..7 are set
into struct rs9_driver_data .clk_dif[4..7] field.
Since there are other structure members past this struct clk_hw
pointer array, writing to .clk_dif[4..7] fields corrupts both
the struct rs9_driver_data content and data around it, sometimes
without crashing the kernel. However, the kernel does surely
crash when the driver is unbound or during suspend.
Fix this, increase the struct clk_hw pointer array size to the
maximum output count of 9FGV0841, which is the biggest chip that
is supported by this driver.
Cc: stable@vger.kernel.org
Fixes: f0e5e18002 ("clk: rs9: Add support for 9FGV0841")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Closes: https://lore.kernel.org/CAMuHMdVyQpOBT+Ho+mXY07fndFN9bKJdaaWGn91WOFnnYErLyg@mail.gmail.com
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa2ad19210 ]
devm_pm_runtime_enable() can fail due to memory allocation. The current
code ignores its return value, and when pm_runtime_resume_and_get() fails,
it returns directly without unmapping the shared_io region.
Add error handling for devm_pm_runtime_enable(). Reorder cleanup labels
to properly unmap shared_io on pm_runtime_resume_and_get() failure.
Fixes: 2f7b1d8b55 ("clk: mediatek: Do a runtime PM get on controllers during probe")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5b1a43950f ]
GXBB has the HDMI PLL OD in the HHI_HDMI_PLL_CNTL2 register while for
GXL/GXM the OD has moved to HHI_HDMI_PLL_CNTL3. At first glance the rest
of the OD setup seems identical.
However, looking at the downstream kernel sources as well as testing
shows that GXL only supports three OD values:
- register value 0 means: divide by 1
- register value 1 means: divide by 2
- register value 2 means: divide by 4
Using register value 3 (which on GXBB means: divide by 8) still divides
by 4 as verified using meson-clk-measure. Downstream sources are also
only using OD register values 0, 1 and 2 for GXL (while for GXBB the
downstream kernel sources are also using value 3).
Add clk_div_table and have it replace the CLK_DIVIDER_POWER_OF_TWO flag
to make the kernel's view of this register match with how the hardware
actually works.
Fixes: 69d9229327 ("clk: meson: add the gxl hdmi pll")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20260105204710.447779-2-martin.blumenstingl@googlemail.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d6205a1878 ]
The duty-cycle calculation in clk_rcg2_set_duty_cycle() currently
derives an intermediate percentage `duty_per = (num * 100) / den` and
then computes:
d = DIV_ROUND_CLOSEST(n * duty_per * 2, 100);
This introduces integer truncation at the percentage step (division by
`den`) and a redundant scaling by 100, which can reduce precision for
large `den` and skew the final rounding.
Compute `2d` directly from the duty fraction to preserve precision and
avoid the unnecessary scaling:
d = DIV_ROUND_CLOSEST(n * duty->num * 2, duty->den);
This keeps the intended formula `d ≈ n * 2 * (num/den)` while performing
a single, final rounded division, improving accuracy especially for small
duty cycles or large denominators. It also removes the unused `duty_per`
variable, simplifying the code.
There is no functional changes beyond improved numerical accuracy.
Fixes: 7f891faf59 ("clk: qcom: clk-rcg2: Add support for duty-cycle for RCG")
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-duty_cycle_precision-v2-1-d1d466a6330a@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit cf33f0b7df upstream.
Commit f316cdff8d ("clk: Annotate struct clk_hw_onecell_data with
__counted_by") annotated the hws member of 'struct clk_hw_onecell_data'
with __counted_by, which informs the bounds sanitizer (UBSAN_BOUNDS)
about the number of elements in .hws[], so that it can warn when .hws[]
is accessed out of bounds. As noted in that change, the __counted_by
member must be initialized with the number of elements before the first
array access happens, otherwise there will be a warning from each access
prior to the initialization because the number of elements is zero. This
occurs in exynos_clkout_probe() due to .num being assigned after .hws[]
has been accessed:
UBSAN: array-index-out-of-bounds in drivers/clk/samsung/clk-exynos-clkout.c:178:18
index 0 is out of range for type 'clk_hw *[*]'
Move the .num initialization to before the first access of .hws[],
clearing up the warning.
Cc: stable@vger.kernel.org
Fixes: f316cdff8d ("clk: Annotate struct clk_hw_onecell_data with __counted_by")
Reported-by: Jochen Sprickerhof <jochen@sprickerhof.de>
Closes: https://lore.kernel.org/aSIYDN5eyKFKoXKL@eldamar.lan/
Tested-by: Jochen Sprickerhof <jochen@sprickerhof.de>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f0e6bc0c3e ]
CP110 based platforms rely on the bootloader for pci port
initialization.
TF-A actively prevents non-uboot re-configuration of pci lanes, and many
boards do not have software control over the pci card reset.
If a pci port had link at boot-time and the clock is stopped at a later
point, the link fails and can not be recovered.
PCI controller driver probe - and by extension ownership of a driver for
the pci clocks - may be delayed especially on large modular kernels,
causing the clock core to start disabling unused clocks.
Add the CLK_IGNORE_UNUSED flag to the three pci port's clocks to ensure
they are not stopped before the pci controller driver has taken
ownership and tested for an existing link.
This fixes failed pci link detection when controller driver probes late,
e.g. with arm64 defconfig and CONFIG_PHY_MVEBU_CP110_COMPHY=m.
Closes: https://lore.kernel.org/r/b71596c7-461b-44b6-89ab-3cfbd492639f@solid-run.com
Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b276445e98 ]
Some keystone clock drivers can be selected when COMPILE_TEST is
enabled but since commit b745c0794e ("clk: keystone: Add sci-clk
driver support") they are never actually built.
Enable compile testing by allowing the build system to process the
keystone drivers.
Fixes: b745c0794e ("clk: keystone: Add sci-clk driver support")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8def051bb ]
The current code uses of_iomap() to map registers but never calls
iounmap() on any error path after the mapping. This causes a memory
leak when probe fails after successful ioremap, for example when
of_clk_add_provider() or r9a06g032_add_clk_domain() fails.
Replace of_iomap() with devm_of_iomap() to automatically unmap the
region on probe failure. Update the error check accordingly to use
IS_ERR() and PTR_ERR() since devm_of_iomap() returns ERR_PTR on error.
Fixes: 4c3d88526e ("clk: renesas: Renesas R9A06G032 clock driver")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251030061603.1954-1-vulab@iscas.ac.cn
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a76ce61d72 ]
When a consumer turns on/off a power domain dependent on another power
domain in hardware, the parent power domain shall be turned on/off by
the power domain provider as well, and to get it the power domain hardware
hierarchy shall be described in the CAMCC driver.
Establish the power domain hierarchy with a Titan GDSC set as a parent of
all other GDSC power domains provided by the SM6350 camera clock controller
to enforce a correct sequence of enabling and disabling power domains by
the consumers, this fixes the CAMCC as a supplier of power domains to CAMSS
IP and its driver.
Fixes: 80f5451d9a ("clk: qcom: Add camera clock controller driver for SM6350")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20251021234450.2271279-3-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8f1121ebf ]
When a consumer turns on/off a power domain dependent on another power
domain in hardware, the parent power domain shall be turned on/off by
the power domain provider as well, and to get it the power domain hardware
hierarchy shall be described in the CAMCC driver.
Establish the power domain hierarchy with a Titan GDSC set as a parent of
all other GDSC power domains provided by the SM8550 camera clock controller
to enforce a correct sequence of enabling and disabling power domains by
the consumers, this fixes the CAMCC as a supplier of power domains to CAMSS
IP and its driver.
Fixes: ccc4e6a061 ("clk: qcom: camcc-sm8550: Add camera clock controller driver for SM8550")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20251021234450.2271279-2-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b91401af6c ]
On R-Car V4H, the PCIEC controller DBI read would generate an SError in
case the controller reset is released by writing SRSTCLR register first,
and immediately afterward reading some PCIEC controller DBI register.
The issue triggers in rcar_gen4_pcie_additional_common_init() on
dw_pcie_readl_dbi(dw, PCIE_PORT_LANE_SKEW), which on V4H is the first
read after reset_control_deassert(dw->core_rsts[DW_PCIE_PWR_RST].rstc).
The reset controller which contains the SRSTCLR register and the PCIEC
controller which contains the DBI register share the same root access
bus, but the bus then splits into separate segments before reaching each
IP. Even if the SRSTCLR write access was posted on the bus before the
DBI read access, it seems the DBI read access may reach the PCIEC
controller before the SRSTCLR write completed, and trigger the SError.
Mitigate the issue by adding a dummy SRSTCLR read, which assures the
SRSTCLR write completes fully and is latched into the reset controller,
before the PCIEC DBI read access can occur.
Fixes: 0ab55cf183 ("clk: renesas: cpg-mssr: Add support for R-Car V4H")
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250922162113.113223-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d37ca1482 ]
In a subsequent patch, the registration callback will need more parameters
from cpg_mssr_priv (like another base address with clock controllers
with double register block, and also, notifiers and rmw_lock).
Instead of adding more parameters, move the needed parameters to a public
sub-struct.
Instead moving clks to this structure, which would have implied to add
an allocation (and cleanup) for it, keep the way the allocation is done
and just have a copy of the pointer in the public structure.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thierry Bultel <thierry.bultel.yh@bp.renesas.com>
Link: https://lore.kernel.org/20250515141828.43444-5-thierry.bultel.yh@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Stable-dep-of: b91401af6c ("clk: renesas: cpg-mssr: Read back reset registers to assure values latched")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62abfd7bed ]
R-Car V4H Reference Manual R19UH0186EJ0130 Rev.1.30 Apr. 21, 2025 page
583 Figure 9.3.1(a) Software Reset flow (A) as well as flow (B) / (C)
indicate after reset has been asserted by writing a matching reset bit
into register SRCR, it is mandatory to wait 1ms.
This 1ms delay is documented on R-Car V4H and V4M, it is currently
unclear whether S4 is affected as well. This patch does apply the extra
delay on R-Car S4 as well.
Fix the reset driver to respect the additional delay when toggling
resets. Drivers which use separate reset_control_(de)assert() must
assure matching delay in their driver code.
Fixes: 0ab55cf183 ("clk: renesas: cpg-mssr: Add support for R-Car V4H")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250918030552.331389-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7c2e86f7b5 ]
The output clock register offset used in clk_wzrd_register_output_clocks
was incorrectly referencing 0x3C instead of 0x38, which caused
misconfiguration of output dividers on Versal platforms.
Correcting the off-by-one error ensures proper configuration of output
clocks.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 18db1ff2de ]
For some of the SCMI based platforms, the oem extended config may be
supported, but not for duty cycle purpose. Skip the duty cycle ops if
err return when trying to get duty cycle info.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e0d75258b ]
As described in AM335x Errata Advisory 1.0.42, WKUP_DEBUGSS_CLKCTRL
can't be disabled - the clock module will just be stuck in transitioning
state forever, resulting in the following warning message after the wait
loop times out:
l3-aon-clkctrl:0000:0: failed to disable
Just add the clock to enable_init_clks, so no attempt is made to disable
it.
Signed-off-by: Matthias Schiffer <matthias.schiffer@tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af98caeaa7 ]
This register is important for sequencing the commands to PLLs, so
actually write the update bits with regmap_write_bits() instead of
relying on a read/modify/write regmap command that could skip the actual
hardware write if the value is identical to the one read.
It's changed when modification is needed to the PLL, when
read-only operation is done, we could keep the call to
regmap_update_bits().
Add a comment to the sam9x60_div_pll_set_div() function that uses this
PLL_UPDT register so that it's used consistently, according to the
product's datasheet.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Tested-by: Ryan Wanner <ryan.wanner@microchip.com> # on sama7d65 and sam9x75
Link: https://lore.kernel.org/r/20250827150811.82496-1-nicolas.ferre@microchip.com
[claudiu.beznea: fix "Alignment should match open parenthesis"
checkpatch.pl check]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0237f5635 ]
A potential divider for the master clock is div/3. The register
configuration for div/3 is MASTER_PRES_MAX. The current bit shifting
method does not work for this case. Checking for MASTER_PRES_MAX will
ensure the correct decimal value is stored in the system.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7aa8781f37 ]
The A523's RTC block is backward compatible with the R329's, but it also
has a calibration function for its internal oscillator, which would
allow it to provide a clock rate closer to the desired 32.768 KHz. This
is useful on the Radxa Cubie A5E, which does not have an external 32.768
KHz crystal.
Add new compatible-specific data for it.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250909170947.2221611-1-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 49ef649110 ]
struct tegra_bpmp::clocks is a pointer to a dynamically allocated array
of pointers to 'struct tegra_bpmp_clk'.
But the size of the allocated area is calculated like it is an array
containing actual 'struct tegra_bpmp_clk' objects - it's not true, there
are just pointers.
Found by Linux Verification Center (linuxtesting.org) with Svace static
analysis tool.
Fixes: 2db12b15c6 ("clk: tegra: Register clocks from root to leaf")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1624dead9a ]
The conditional check for the PLL0 multiplier 'm' used a logical AND
instead of OR, making the range check ineffective. This patch replaces
&& with || to correctly reject invalid values of 'm' that are either
less than or equal to 0 or greater than LPC18XX_PLL0_MSEL_MAX.
This ensures proper bounds checking during clk rate setting and rounding.
Fixes: b04e0b8fd5 ("clk: add lpc18xx cgu clk driver")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
[sboyd@kernel.org: 'm' is unsigned so remove < condition]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b46a3d323a ]
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Stable-dep-of: 1624dead9a ("clk: nxp: Fix pll0 rate check condition in LPC18xx CGU driver")
Signed-off-by: Sasha Levin <sashal@kernel.org>
