commit 295f58fdcc upstream.
As like other SDX SoCs, SDX75 SoC's QPIC BCM resource was modeled as a
RPMh clock in clk-rpmh driver. However, for SDX75, this resource was also
described as an interconnect and BCM node mistakenly. It is incorrect to
describe the same resource in two different providers, as it will lead to
votes from clients overriding each other.
Hence, drop the QPIC interconnect and BCM nodes and let the clients use
clk-rpmh driver to vote for this resource.
Without this change, the NAND driver fails to probe on SDX75, as the
interconnect sync state disables the QPIC nodes as there were no clients
voting for this ICC resource. However, the NAND driver had already voted
for this BCM resource through the clk-rpmh driver. Since both votes come
from Linux, RPMh was unable to distinguish between these two and ends up
disabling the QPIC resource during sync state.
Cc: stable@vger.kernel.org
Fixes: 3642b4e5cb ("interconnect: qcom: Add SDX75 interconnect provider driver")
Signed-off-by: Raviteja Laggyshetty <quic_rlaggysh@quicinc.com>
[mani: dropped the reference to bcm_qp0, reworded description]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Lakshmi Sowjanya D <quic_laksd@quicinc.com> # on SDX75
Link: https://lore.kernel.org/r/20250926-sdx75-icc-v2-1-20d6820e455c@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This series adds QoS support for QNOC type device which can be found on
SC7280 platform. It adds support for programming priority,
priority forward disable and urgency forwarding. This helps in
priortizing the traffic originating from different interconnect masters
at NOC (Network On Chip).
* icc-rpmh-qos
dt-bindings: interconnect: add clock property to enable QOS on SC7280
interconnect: qcom: icc-rpmh: Add QoS configuration support
interconnect: qcom: sc7280: enable QoS configuration
interconnect: qcom: Fix DT backwards compatibility for QoS
Link: https://lore.kernel.org/r/20240607173927.26321-1-quic_okukatla@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Georgi writes:
interconnect changes for 6.10
This pull request contains the interconnect changes for the 6.10-rc1 merge
window. It contains some small driver changes listed below:
Driver changes:
- Cleanup sm6115 QoS port numbering.
- Fix incorrect port value in qcm2290 driver.
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: qcom: qcm2290: Fix mas_snoc_bimc QoS port assignment
interconnect: qcom: sm6115: Unspaghettify SNoC QoS port numbering
Georgi writes:
interconnect fixes for v6.9-rc
Here are fixes for two reported issues. One of them is a fix for
a driver that tries to access a non-existent resource which prints
a warning message during boot. The other one is fixing a race
condition in the core framework where one struct member has been
left unprotected by mutex.
- interconnect: qcom: x1e80100: Remove inexistent ACV_PERF BCM
- interconnect: Don't access req_list while it's being manipulated
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: Don't access req_list while it's being manipulated
interconnect: qcom: x1e80100: Remove inexistent ACV_PERF BCM
The downstream kernel has infrastructure for passing votes from different
interconnect nodes onto different RPMh RSCs. This neither implemented, not
is going to be implemented upstream (in favor of a different solution
using ICC tags through the same node).
Unfortunately, as it happens, meaningless (in the upstream context) parts
of the vendor driver were copied, ending up causing havoc - since all
"per-RSC" (in quotes because they all point to the main APPS one) BCMs
defined within the driver overwrite the value in RPMh on every
aggregation.
To both avoid keeping bogus code around and possibly introducing
impossible-to-track-down bugs (busses shutting down for no reason), get
rid of the duplicated BCMs and their associated ICC nodes.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Link: https://lore.kernel.org/r/20240102-topic-x1e_fixes-v1-1-70723e08d5f6@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The downstream kernel has infrastructure for passing votes from different
interconnect nodes onto different RPMh RSCs. This neither implemented, not
is going to be implemented upstream (in favor of a different solution
using ICC tags through the same node).
Unfortunately, as it happens, meaningless (in the upstream context) parts
of the vendor driver were copied, ending up causing havoc - since all
"per-RSC" (in quotes because they all point to the main APPS one) BCMs
defined within the driver overwrite the value in RPMh on every
aggregation.
To both avoid keeping bogus code around and possibly introducing
impossible-to-track-down bugs (busses shutting down for no reason), get
rid of the duplicated BCMs and their associated ICC nodes.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20231218-topic-8550_fixes-v1-1-ce1272d77540@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Add driver for interconnect busses found in MSM8909 based platforms.
The topology consists of three NoCs that are partially controlled by
a RPM processor.
In the downstream/vendor kernel from Qualcomm there is an additional
"mm-snoc". However, it actually ends up using the same RPM "snoc_clk"
as the normal "snoc". It looks like this is actually the same NoC
in hardware and the "mm-snoc" was only defined to assign a different
"qcom,util-fact" to increase bandwidth requests by a static margin.
In mainline we can represent this by assigning the equivalent "ab_coeff"
to all the nodes that are part of "mm-snoc" downstream.
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
[Stephan: Drop separate mm-snoc that exists downstream since it's
actually the same NoC as SNoC in hardware, add qos_offset for BIMC,
add ab_coeff for mm-snoc nodes and BIMC]
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231220-icc-msm8909-v2-2-3b68bbed2891@kernkonzept.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Pull char/misc and other driver updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem changes
for 6.8-rc1.
Other than lots of binder driver changes (as you can see by the merge
conflicts) included in here are:
- lots of iio driver updates and additions
- spmi driver updates
- eeprom driver updates
- firmware driver updates
- ocxl driver updates
- mhi driver updates
- w1 driver updates
- nvmem driver updates
- coresight driver updates
- platform driver remove callback api changes
- tags.sh script updates
- bus_type constant marking cleanups
- lots of other small driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (341 commits)
android: removed duplicate linux/errno
uio: Fix use-after-free in uio_open
drivers: soc: xilinx: add check for platform
firmware: xilinx: Export function to use in other module
scripts/tags.sh: remove find_sources
scripts/tags.sh: use -n to test archinclude
scripts/tags.sh: add local annotation
scripts/tags.sh: use more portable -path instead of -wholename
scripts/tags.sh: Update comment (addition of gtags)
firmware: zynqmp: Convert to platform remove callback returning void
firmware: turris-mox-rwtm: Convert to platform remove callback returning void
firmware: stratix10-svc: Convert to platform remove callback returning void
firmware: stratix10-rsu: Convert to platform remove callback returning void
firmware: raspberrypi: Convert to platform remove callback returning void
firmware: qemu_fw_cfg: Convert to platform remove callback returning void
firmware: mtk-adsp-ipc: Convert to platform remove callback returning void
firmware: imx-dsp: Convert to platform remove callback returning void
firmware: coreboot_table: Convert to platform remove callback returning void
firmware: arm_scpi: Convert to platform remove callback returning void
firmware: arm_scmi: Convert to platform remove callback returning void
...
