[ Upstream commit fcd7f96c78 ]
Although it is guided that `#mbox-cells` must be at least 1, there are
many instances of `#mbox-cells = <0>;` in the device tree. If that is
the case and the corresponding mailbox controller does not provide
`fw_xlate` and of_xlate` function pointers, `fw_mbox_index_xlate()` will
be used by default and out-of-bounds accesses could occur due to lack of
bounds check in that function.
Cc: stable@vger.kernel.org
Signed-off-by: Joonwon Kang <joonwonkang@google.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8da4988b6e ]
Use dev_err to show the error log instead of using dev_dbg.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Stable-dep-of: fcd7f96c78 ("mailbox: Prevent out-of-bounds access in fw_mbox_index_xlate()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db824c1119 ]
Sorting headers alphabetically helps locating duplicates,
and makes it easier to figure out where to insert new headers.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Stable-dep-of: fcd7f96c78 ("mailbox: Prevent out-of-bounds access in fw_mbox_index_xlate()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c71c61fc6 ]
There are no concurrency problems if multiple consumers parse the
phandle, don't gratuiously protect the parsing with the mutex used
for the controllers list.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Stable-dep-of: fcd7f96c78 ("mailbox: Prevent out-of-bounds access in fw_mbox_index_xlate()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c77661d60d ]
If there are any pending messages in the mailbox queue, they are sent
as soon as a TX done event arrives from the driver. This may trigger a
new delivery interrupt while the previous one is still being handled.
If the delivery status is cleared after this, the interrupt is lost.
To prevent this from happening, clear the delivery status immediately
after checking it and before any new messages are sent.
Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 673b570825 ]
In current imx-mailbox driver, the MU IRQ is configured with
'IRQF_NO_SUSPEND' flag set. So during linux suspend/resume flow,
the MU IRQ is always enabled. With commit 892cb524ae ("mailbox: imx:
fix wakeup failure from freeze mode"), if the MU IRQ is triggered after
the priv->suspended flag has been set, the system suspend will be
aborted.
On i.MX7ULP platform, certain drivers that depend on rpmsg may need
to send rpmsg request and receive an acknowledgment from the remote
core during the late_suspend stage. Early suspend abort is not
expected, and the i.MX7ULP already has additional hardware and
software to make sure the system can be wakeup from freeze mode
correctly when MU IRQ is trigger.
Skip the 'suspend' flag handling logic on i.MX7ULP to avoid the
early abort when doing suspend.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 673327028c ]
The PCC code currently specifies IRQF_ONESHOT if the interrupt could
potentially be shared but doesn't actually use request_threaded_irq() and
the interrupt handler does not use IRQ_WAKE_THREAD so IRQF_ONESHOT is
never relevant. Since commit aef30c8d56 ("genirq: Warn about using
IRQF_ONESHOT without a threaded handler") specifying it has resulted in a
WARN_ON(), fix this by removing IRQF_ONESHOT.
Reported-by: Aishwarya TCV <Aishwarya.TCV@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03843d95a4 ]
request_threaded_irq() is invoked with a primary and a secondary handler
and no flags are passed. The primary handler is the same as
irq_default_primary_handler() so there is no need to have an identical
copy.
The lack of the IRQF_ONESHOT flag can be dangerous because the interrupt
source is not masked while the threaded handler is active. This means,
especially on LEVEL typed interrupt lines, the interrupt can fire again
before the threaded handler had a chance to run.
Use the default primary interrupt handler by specifying NULL and set
IRQF_ONESHOT so the interrupt source is masked until the secondary handler
is done.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260128095540.863589-5-bigeasy@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ff0e4d4c97 ]
The error status mask for a type 3/4 subspace is used for reading the
error status, and the bitwise inverse is used for clearing the error
with the intent being to preserve any of the non-error bits. However,
we were previously applying the mask to extract the status and then
applying the inverse to the result which ended up clearing all bits.
Instead, store the inverse mask in the preserve mask and then use that
on the original value read from the error status so that only the error
is cleared.
Fixes: c45ded7e11 ("mailbox: pcc: Add support for PCCT extended PCC subspaces(type 3/4)")
Signed-off-by: Jamie Iles <jamie.iles@oss.qualcomm.com>
Signed-off-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a675f5041 ]
The existing error handling logic in pcc_mbox_irq() is intermixed with the
main flow of the function. The command complete check and the complete
complete update/acknowledgment are nicely factored into separate functions.
Moves error detection and clearing logic into a separate function called:
pcc_mbox_error_check_and_clear() by extracting error-handling logic from
pcc_mbox_irq().
This ensures error checking and clearing are handled separately and it
improves maintainability by keeping the IRQ handler focused on processing
events.
Acked-by: Huisong Li <lihuisong@huawei.com>
Tested-by: Huisong Li <lihuisong@huawei.com>
Tested-by: Adam Young <admiyo@os.amperecomputing.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Stable-dep-of: ff0e4d4c97 ("mailbox: pcc: don't zero error register")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a195c7ccfb ]
GCE can only fetch the command buffer address from a 32-bit register.
Some SoCs support a 35-bit command buffer address for GCE, which
requires a right shift of 3 bits before setting the address into
the 32-bit register. A comment has been added to the header of
cmdq_get_shift_pa() to explain this requirement.
To prevent the GCE command buffer address from being DMA mapped beyond
its supported bit range, the DMA bit mask for the device is set during
initialization.
Additionally, to ensure the correct shift is applied when setting or
reading the register that stores the GCE command buffer address,
new APIs, cmdq_convert_gce_addr() and cmdq_revert_gce_addr(), have
been introduced for consistent operations on this register.
The variable type for the command buffer address has been standardized
to dma_addr_t to prevent handling issues caused by type mismatches.
Fixes: 0858fde496 ("mailbox: cmdq: variablize address shift in platform")
Signed-off-by: Jason-JH Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3acf1028f5 ]
The debugfs_create_dir() function returns ERR_PTR() on error, not NULL.
The current null-check fails to catch errors.
Use IS_ERR() to correctly check for errors.
Fixes: 8ea4484d0c ("mailbox: Add generic mechanism for testing Mailbox Controllers")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f39f56520 ]
pm_runtime_get_sync() and pm_runtime_put_autosuspend() were previously
called in cmdq_mbox_send_data(), which is under a spinlock in msg_submit()
(mailbox.c). This caused lockdep warnings such as "sleeping function
called from invalid context" when running with lockdebug enabled.
The BUG report:
BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:1164
in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 3616, name: kworker/u17:3
preempt_count: 1, expected: 0
RCU nest depth: 0, expected: 0
INFO: lockdep is turned off.
irq event stamp: 0
CPU: 1 PID: 3616 Comm: kworker/u17:3 Not tainted 6.1.87-lockdep-14133-g26e933aca785 #1
Hardware name: Google Ciri sku0/unprovisioned board (DT)
Workqueue: imgsys_runner imgsys_runner_func
Call trace:
dump_backtrace+0x100/0x120
show_stack+0x20/0x2c
dump_stack_lvl+0x84/0xb4
dump_stack+0x18/0x48
__might_resched+0x354/0x4c0
__might_sleep+0x98/0xe4
__pm_runtime_resume+0x70/0x124
cmdq_mbox_send_data+0xe4/0xb1c
msg_submit+0x194/0x2dc
mbox_send_message+0x190/0x330
imgsys_cmdq_sendtask+0x1618/0x2224
imgsys_runner_func+0xac/0x11c
process_one_work+0x638/0xf84
worker_thread+0x808/0xcd0
kthread+0x24c/0x324
ret_from_fork+0x10/0x20
Additionally, pm_runtime_put_autosuspend() should be invoked from the
GCE IRQ handler to ensure the hardware has actually completed its work.
To resolve these issues, remove the pm_runtime calls from
cmdq_mbox_send_data() and delegate power management responsibilities
to the client driver.
Fixes: 8afe816b0c ("mailbox: mtk-cmdq-mailbox: Implement Runtime PM with autosuspend")
Signed-off-by: Jason-JH Lin <jason-jh.lin@mediatek.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 472f8a3fcc ]
__pm_runtime_put_autosuspend() was meant to be used by callers that needed
to put the Runtime PM usage_count without marking the device's last busy
timestamp. It was however seen that the Runtime PM autosuspend related
functions should include that call. Thus switch the driver to
use pm_runtime_put_autosuspend().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Stable-dep-of: 3f39f56520 ("mailbox: mtk-cmdq: Remove pm_runtime APIs from cmdq_mbox_send_data()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 08fb6d8ff9 ]
pm_runtime_put_autosuspend() will soon be changed to include a call to
pm_runtime_mark_last_busy(). This patch switches the current users to
__pm_runtime_put_autosuspend() which will continue to have the
functionality of old pm_runtime_put_autosuspend().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Stable-dep-of: 3f39f56520 ("mailbox: mtk-cmdq: Remove pm_runtime APIs from cmdq_mbox_send_data()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb160e791a ]
The driver incorrectly determines SGI vs SPI interrupts by checking IRQ
number < 16, which fails with dynamic IRQ allocation. During unbind,
this causes improper SGI cleanup leading to kernel crash.
Add explicit irq_type field to pdata for reliable identification of SGI
interrupts (type-2) and only clean up SGI resources when appropriate.
Fixes: 6ffb163534 ("mailbox: zynqmp: handle SGI for shared IPI")
Signed-off-by: Harini T <harini.t@amd.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0aead8197f ]
The cleanup loop was starting at the wrong array index, causing
out-of-bounds access.
Start the loop at the correct index for zero-indexed arrays to prevent
accessing memory beyond the allocated array bounds.
Fixes: 4981b82ba2 ("mailbox: ZynqMP IPI mailbox controller")
Signed-off-by: Harini T <harini.t@amd.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 019e3f4550 ]
The ipi_mbox->dev.parent check is unreliable proxy for registration
status as it fails to protect against probe failures that occur after
the parent is assigned but before device_register() completes.
device_is_registered() is the canonical and robust method to verify the
registration status.
Remove ipi_mbox->dev.parent check in zynqmp_ipi_free_mboxes().
Fixes: 4981b82ba2 ("mailbox: ZynqMP IPI mailbox controller")
Signed-off-by: Harini T <harini.t@amd.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 341867f730 ]
The controller is registered using the device-managed function
'devm_mbox_controller_register()'. As documented in mailbox.c, this
ensures the devres framework automatically calls
mbox_controller_unregister() when device_unregister() is invoked, making
the explicit call unnecessary.
Remove redundant mbox_controller_unregister() call as
device_unregister() handles controller cleanup.
Fixes: 4981b82ba2 ("mailbox: ZynqMP IPI mailbox controller")
Signed-off-by: Harini T <harini.t@amd.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dddbd233e6 ]
&chan->lock is not supposed to protect 'chan->mbox'.
And in __mbox_bind_client, try_module_get is also not protected
by &chan->lock. So move module_put out of the lock protected
region.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9fcebcb37c ]
Add cmdq_gctl_value_toggle() to configure GCE_CTRL_BY_SW and GCE_DDR_EN
together in the same GCE_GCTL_VALUE register.
For the SoCs whose GCE is located in MMINFRA and uses MMINFRA_AO power,
this allows it to be written without enabling the clocks. Otherwise, all
GCE registers should be written after the GCE clocks are enabled.
Move this function into cmdq_runtime_resume() and cmdq_runtime_suspend()
to ensure it is called when the GCE clock is enabled.
Fixes: 7abd037aa5 ("mailbox: mtk-cmdq: add gce ddr enable support flow")
Signed-off-by: Jason-JH Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f5cb07ec6a ]
i.MX95 features several processing domains, Cortex-M7, Cortex-A55
secure, Cortex-A55 non-secure. Each domain could communicate with
SCMI firmware with a dedicated MU. But the current NXP SCMI firmware
is not a RTOS, all processing logic codes are in interrupt context.
So if high priority Cortex-M7 is communicating with SCMI firmware and
requires a bit more time to handle the SCMI call, Linux MU TXDB_V2
will be timeout with high possiblity in 1000us(the current value in
imx-mailbox.c). Per NXP SCMI firmware design, if timeout, there is
no recover logic, so SCMI agents should never timeout and always
wait until the check condition met.
Based on the upper reason, enlarge the timeout value to 10ms which
is less chance to timeout, and retry if timeout really happends.
Fixes: 5bfe4067d3 ("mailbox: imx: support channel type tx doorbell v2")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24fdd5074b ]
In case of error, of_parse_phandle_with_args() returns -EINVAL when the
passed index is negative, or -ENOENT when the index is for an empty
phandle. The mailbox core overwrote the error return code with a less
precise -ENODEV. Use the error returned code from
of_parse_phandle_with_args().
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d181acea5b ]
The Platform Communication Channel (PCC) mailbox driver currently uses
ioremap() to map channel shared memory regions. However it is preferred
to use acpi_os_ioremap(), which is mapping function specific to EFI/ACPI
defined memory regions. It ensures that the correct memory attributes
are applied when mapping ACPI-provided regions.
While at it, also add checks for handling any errors with the mapping.
Acked-by: Huisong Li <lihuisong@huawei.com>
Tested-by: Huisong Li <lihuisong@huawei.com>
Tested-by: Adam Young <admiyo@os.amperecomputing.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf1338c0e0 ]
The PCC mailbox interrupt handler (pcc_mbox_irq()) currently checks
for command completion flags and any error status before clearing the
interrupt.
The below sequence highlights an issue in the handling of PCC mailbox
interrupts, specifically when dealing with doorbell notifications and
acknowledgment between the OSPM and the platform where type3 and type4
channels are sharing the interrupt.
-------------------------------------------------------------------------
| T | Platform Firmware | OSPM/Linux PCC driver |
|---|---------------------------------|---------------------------------|
| 1 | | Build message in shmem |
| 2 | | Ring Type3 chan doorbell |
| 3 | Receives the doorbell interrupt | |
| 4 | Process the message from OSPM | |
| 5 | Build response for the message | |
| 6 | Ring Platform ACK interrupt on | |
| | Type3 chan to OSPM | Received the interrupt |
| 7 | Build Notification in Type4 Chan| |
| 8 | | Start processing interrupt in |
| | | pcc_mbox_irq() handler |
| 9 | | Enter PCC handler for Type4 chan|
|10 | | Check command complete cleared |
|11 | | Read the notification |
|12 | | Clear Platform ACK interrupt |
| | No effect from the previous step yet as the Platform ACK |
| | interrupt has not yet been triggered for this channel |
|13 | Ring Platform ACK interrupt on | |
| | Type4 chan to OSPM | |
|14 | | Enter PCC handler for Type3 chan|
|15 | | Command complete is set. |
|16 | | Read the response. |
|17 | | Clear Platform ACK interrupt |
|18 | | Leave PCC handler for Type3 |
|19 | | Leave pcc_mbox_irq() handler |
|20 | | Re-enter pcc_mbox_irq() handler |
|21 | | Enter PCC handler for Type4 chan|
|22 | | Leave PCC handler for Type4 chan|
|23 | | Enter PCC handler for Type3 chan|
|24 | | Leave PCC handler for Type3 chan|
|25 | | Leave pcc_mbox_irq() handler |
-------------------------------------------------------------------------
The key issue occurs when OSPM tries to acknowledge platform ack
interrupt for a notification which is ready to be read and processed
but the interrupt itself is not yet triggered by the platform.
This ineffective acknowledgment leads to an issue later in time where
the interrupt remains pending as we exit the interrupt handler without
clearing the platform ack interrupt as there is no pending response or
notification. The interrupt acknowledgment order is incorrect.
To resolve this issue, the platform acknowledgment interrupt should
always be cleared before processing the interrupt for any notifications
or response.
Reported-by: Robbie King <robbiek@xsightlabs.com>
Reviewed-by: Huisong Li <lihuisong@huawei.com>
Tested-by: Huisong Li <lihuisong@huawei.com>
Tested-by: Adam Young <admiyo@os.amperecomputing.com>
Tested-by: Robbie King <robbiek@xsightlabs.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9779d45c74 ]
The function mbox_chan_received_data() calls the Rx callback of the
mailbox client driver. The callback might set chan_in_use flag from
pcc_send_data(). This flag's status determines whether the PCC channel
is in use.
However, there is a potential race condition where chan_in_use is
updated incorrectly due to concurrency between the interrupt handler
(pcc_mbox_irq()) and the command sender(pcc_send_data()).
The 'chan_in_use' flag of a channel is set to true after sending a
command. And the flag of the new command may be cleared erroneous by
the interrupt handler afer mbox_chan_received_data() returns,
As a result, the interrupt being level triggered can't be cleared in
pcc_mbox_irq() and it will be disabled after the number of handled times
exceeds the specified value. The error log is as follows:
| kunpeng_hccs HISI04B2:00: PCC command executed timeout!
| kunpeng_hccs HISI04B2:00: get port link status info failed, ret = -110
| irq 13: nobody cared (try booting with the "irqpoll" option)
| Call trace:
| dump_backtrace+0x0/0x210
| show_stack+0x1c/0x2c
| dump_stack+0xec/0x130
| __report_bad_irq+0x50/0x190
| note_interrupt+0x1e4/0x260
| handle_irq_event+0x144/0x17c
| handle_fasteoi_irq+0xd0/0x240
| __handle_domain_irq+0x80/0xf0
| gic_handle_irq+0x74/0x2d0
| el1_irq+0xbc/0x140
| mnt_clone_write+0x0/0x70
| file_update_time+0xcc/0x160
| fault_dirty_shared_page+0xe8/0x150
| do_shared_fault+0x80/0x1d0
| do_fault+0x118/0x1a4
| handle_pte_fault+0x154/0x230
| __handle_mm_fault+0x1ac/0x390
| handle_mm_fault+0xf0/0x250
| do_page_fault+0x184/0x454
| do_translation_fault+0xac/0xd4
| do_mem_abort+0x44/0xb4
| el0_da+0x40/0x74
| el0_sync_handler+0x60/0xb4
| el0_sync+0x168/0x180
| handlers:
| pcc_mbox_irq
| Disabling IRQ #13
To solve this issue, pcc_mbox_irq() must clear 'chan_in_use' flag before
the call to mbox_chan_received_data().
Tested-by: Adam Young <admiyo@os.amperecomputing.com>
Tested-by: Robbie King <robbiek@xsightlabs.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
(sudeep.holla: Minor updates to the subject, commit message and comment)
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit bf0c9fb462 upstream.
Tegra264 has updated HSP_INT_DIMENSIONING register as follows:
* nSI is now BIT17:BIT21.
* nDB is now BIT12:BIT16.
Currently, we are using a static macro HSP_nINT_MASK to get the values
from HSP_INT_DIMENSIONING register. This results in wrong values for nSI
for HSP instances that supports 16 shared interrupts.
Define dimensioning masks in soc data and use them to parse nSI, nDB,
nAS, nSS & nSM values.
Fixes: 602dbbacc3 ("mailbox: tegra: add support for Tegra264")
Cc: stable@vger.kernel.org
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 170a264d26 upstream.
struct zynqmp_ipi_pdata __percpu *pdata is not a per-cpu variable,
so it should not be annotated with __percpu annotation.
Remove invalid __percpu annotation to fix several
zynqmp-ipi-mailbox.c:920:15: warning: incorrect type in assignment (different address spaces)
zynqmp-ipi-mailbox.c:920:15: expected struct zynqmp_ipi_pdata [noderef] __percpu *pdata
zynqmp-ipi-mailbox.c:920:15: got void *
zynqmp-ipi-mailbox.c:927:56: warning: incorrect type in argument 3 (different address spaces)
zynqmp-ipi-mailbox.c:927:56: expected unsigned int [usertype] *out_value
zynqmp-ipi-mailbox.c:927:56: got unsigned int [noderef] __percpu *
...
and several
drivers/mailbox/zynqmp-ipi-mailbox.c:924:9: warning: dereference of noderef expression
...
sparse warnings.
There were no changes in the resulting object file.
Cc: stable@vger.kernel.org
Fixes: 6ffb163534 ("mailbox: zynqmp: handle SGI for shared IPI")
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Tanmay Shah <tanmay.shah@amd.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0b7f8328f9 upstream.
The Tegra RCE (Camera) driver expects the mailbox to be empty before
processing the IVC messages. On RT kernel, the threads processing the
IVC messages (which are invoked after `mbox_chan_received_data()` is
called) may be on a different CPU or running with a higher priority
than the HSP interrupt handler thread. This can cause it to act on the
message before the mailbox gets cleared in the HSP interrupt handler
resulting in a loss of IVC notification.
Fix this by clearing the mailbox data register before calling
`mbox_chan_received_data()`.
Fixes: 8f585d1403 ("mailbox: tegra-hsp: Add tegra_hsp_sm_ops")
Fixes: 74c20dd0f8 ("mailbox: tegra-hsp: Add 128-bit shared mailbox support")
Cc: stable@vger.kernel.org
Signed-off-by: Pekka Pessi <ppessi@nvidia.com>
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7f9e19f207 ]
Type 4 PCC channels have an option to send back a response
to the platform when they are done processing the request.
The flag to indicate whether or not to respond is inside
the message body, and thus is not available to the pcc
mailbox.
If the flag is not set, still set command completion
bit after processing message.
In order to read the flag, this patch maps the shared
buffer to virtual memory. To avoid duplication of mapping
the shared buffer is then made available to be used by
the driver that uses the mailbox.
Signed-off-by: Adam Young <admiyo@os.amperecomputing.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 44059790a5 ]
Nothing in kfifo.h directly needs dma-mapping.h, only two macros
use DMA_MAPPING_ERROR when actually instantiated. Drop the
dma-mapping.h include to reduce include bloat.
Add an explicity <linux/io.h> include to drivers/mailbox/omap-mailbox.c
as that file uses __raw_readl and __raw_writel through a complicated
include chain involving <linux/dma-mapping.h>
Fixes: d52b761e4b ("kfifo: add kfifo_dma_out_prepare_mapped()")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241023055317.313234-1-hch@lst.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 192a16a343 ]
Both the inner and outer loops in this code use the "i" iterator.
The inner loop should really use a different iterator.
It doesn't affect things in practice because the data comes from the
device tree. The "protocol" and "windows" variables are going to be
zero. That means we're always going to hit the "return &chans[channel];"
statement and we're not going to want to iterate through the outer
loop again.
Still it's worth fixing this for future use cases.
Fixes: 5a6338cce9 ("mailbox: arm_mhuv2: Add driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 271ee263cc ]
It should be size of the struct clk_bulk_data, not data pointer pass to
devm_kcalloc().
Fixes: aa1609f571 ("mailbox: mtk-cmdq: Dynamically allocate clk_bulk_data structure")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Selecting CONFIG_OMAP2PLUS_MBOX while compile testing
causes a build failure:
WARNING: unmet direct dependencies detected for OMAP2PLUS_MBOX
Depends on [n]: MAILBOX [=y] && (ARCH_OMAP2PLUS || ARCH_K3)
Selected by [m]:
- TI_K3_M4_REMOTEPROC [=m] && REMOTEPROC [=y] && (ARCH_K3 || COMPILE_TEST [=y])
Using 'select' to force-enable another subsystem is generally
a mistake and causes problems such as this one, so change the
three drivers that link against this driver to use 'depends on'
instead, and ensure the driver itself can be compile tested
regardless of the platform.
When compile-testing without CONFIG_TI_SCI_PROTOCOL=m, there
is a chance for a link failure, so add a careful dependency
on that.
arm-linux-gnueabi-ld: drivers/remoteproc/ti_k3_m4_remoteproc.o: in function `k3_m4_rproc_probe':
ti_k3_m4_remoteproc.c:(.text.k3_m4_rproc_probe+0x76): undefined reference to `devm_ti_sci_get_by_phandle'
Fixes: ebcf9008a8 ("remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Andrew Davis <afd@ti.com>
Reviewed-by: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Use of_property_match_string() instead of open-coding the search. With
this, of_get_property() can be removed as there is no need to check for
"mbox-names" presence first.
This is part of a larger effort to remove callers of of_get_property()
and similar functions. of_get_property() leaks the DT property data
pointer which is a problem for dynamically allocated nodes which may
be freed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
During noirq suspend phase the Raspberry Pi power driver suffer of
firmware property timeouts. The reason is that the IRQ of the underlying
BCM2835 mailbox is disabled and rpi_firmware_property_list() will always
run into a timeout [1].
Since the VideoCore side isn't consider as a wakeup source, set the
IRQF_NO_SUSPEND flag for the mailbox IRQ in order to keep it enabled
during suspend-resume cycle.
[1]
PM: late suspend of devices complete after 1.754 msecs
WARNING: CPU: 0 PID: 438 at drivers/firmware/raspberrypi.c:128
rpi_firmware_property_list+0x204/0x22c
Firmware transaction 0x00028001 timeout
Modules linked in:
CPU: 0 PID: 438 Comm: bash Tainted: G C 6.9.3-dirty #17
Hardware name: BCM2835
Call trace:
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x34/0x44
dump_stack_lvl from __warn+0x88/0xec
__warn from warn_slowpath_fmt+0x7c/0xb0
warn_slowpath_fmt from rpi_firmware_property_list+0x204/0x22c
rpi_firmware_property_list from rpi_firmware_property+0x68/0x8c
rpi_firmware_property from rpi_firmware_set_power+0x54/0xc0
rpi_firmware_set_power from _genpd_power_off+0xe4/0x148
_genpd_power_off from genpd_sync_power_off+0x7c/0x11c
genpd_sync_power_off from genpd_finish_suspend+0xcc/0xe0
genpd_finish_suspend from dpm_run_callback+0x78/0xd0
dpm_run_callback from device_suspend_noirq+0xc0/0x238
device_suspend_noirq from dpm_suspend_noirq+0xb0/0x168
dpm_suspend_noirq from suspend_devices_and_enter+0x1b8/0x5ac
suspend_devices_and_enter from pm_suspend+0x254/0x2e4
pm_suspend from state_store+0xa8/0xd4
state_store from kernfs_fop_write_iter+0x154/0x1a0
kernfs_fop_write_iter from vfs_write+0x12c/0x184
vfs_write from ksys_write+0x78/0xc0
ksys_write from ret_fast_syscall+0x0/0x54
Exception stack(0xcc93dfa8 to 0xcc93dff0)
[...]
PM: noirq suspend of devices complete after 3095.584 msecs
Link: https://github.com/raspberrypi/firmware/issues/1894
Fixes: 0bae6af6d7 ("mailbox: Enable BCM2835 mailbox support")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The devm_clk_get_enabled() helpers:
- call devm_clk_get()
- call clk_prepare_enable() and register what is needed in order to
call clk_disable_unprepare() when needed, as a managed resource.
This simplifies the code and avoids the calls to clk_disable_unprepare().
Due to clk only used in probe, not in suspend\resume, this pointer can
remove from sprd_mbox_priv to save a little memory.
Signed-off-by: Huan Yang <link@vivo.com>
Reviewed-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
MODULE_DEVICE_TABLE(of, rockchip_mbox_of_match) could let the module
properly autoloaded based on the alias from of_device_id table. It
should be 'rockchip_mbox_of_match' instead of 'rockchp_mbox_of_match',
just fix it.
Fixes: f70ed3b5dc ("mailbox: rockchip: Add Rockchip mailbox driver")
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
There are several MUs for different usage, SCMI MU, ELE MU, RemotePROC
MU. Using "imx_mu_chan" in interrupt name would be hard to identify
which MU triggers interrupt, so use device name to make it easy to know
which MU triggers which interrupt.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The ARM MHUv3 controller is only present on ARM64 SoCs. Hence add a
dependency on ARM64, to prevent asking the user about this driver when
configuring a kernel for a different architecture than ARM64.
Fixes: ca1a8680b1 ("mailbox: arm_mhuv3: Add driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
When mtk-cmdq unbinds, a WARN_ON message with condition
pm_runtime_get_sync() < 0 occurs.
According to the call tracei below:
cmdq_mbox_shutdown
mbox_free_channel
mbox_controller_unregister
__devm_mbox_controller_unregister
...
The root cause can be deduced to be calling pm_runtime_get_sync() after
calling pm_runtime_disable() as observed below:
1. CMDQ driver uses devm_mbox_controller_register() in cmdq_probe()
to bind the cmdq device to the mbox_controller, so
devm_mbox_controller_unregister() will automatically unregister
the device bound to the mailbox controller when the device-managed
resource is removed. That means devm_mbox_controller_unregister()
and cmdq_mbox_shoutdown() will be called after cmdq_remove().
2. CMDQ driver also uses devm_pm_runtime_enable() in cmdq_probe() after
devm_mbox_controller_register(), so that devm_pm_runtime_disable()
will be called after cmdq_remove(), but before
devm_mbox_controller_unregister().
To fix this problem, cmdq_probe() needs to move
devm_mbox_controller_register() after devm_pm_runtime_enable() to make
devm_pm_runtime_disable() be called after
devm_mbox_controller_unregister().
Fixes: 623a6143a8 ("mailbox: mediatek: Add Mediatek CMDQ driver")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
There are cases where remote that is acking mailbox message can take longer
than the default tx_poll_period value. Therefore, enable this to be mutable.
Added tx_poll_period field while inserting the module to set the
poll period for ack after sending mailbox message.
Signed-off-by: Ben Levinsky <ben.levinsky@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
This newly added driver fails compile testing on 32-bit architectures
because it relies on 64-bit MMIO register access:
drivers/mailbox/qcom-cpucp-mbox.c: In function 'qcom_cpucp_mbox_irq_fn':
drivers/mailbox/qcom-cpucp-mbox.c:54:18: error: implicit declaration of function 'readq'; did you mean 'readb'? [-Wimplicit-function-declaration]
54 | status = readq(cpucp->rx_base + APSS_CPUCP_RX_MBOX_STAT);
| ^~~~~
| readb
drivers/mailbox/qcom-cpucp-mbox.c:65:17: error: implicit declaration of function 'writeq'; did you mean 'writeb'? [-Wimplicit-function-declaration]
65 | writeq(BIT(i), cpucp->rx_base + APSS_CPUCP_RX_MBOX_CLEAR);
| ^~~~~~
| writeb
Change the Kconfig dependency to disallow that configuration as well.
Fixes: 0e2a9a0310 ("mailbox: Add support for QTI CPUCP mailbox controller")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mailbox/mtk-cmdq-mailbox.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
