[ Upstream commit 4dd1dda652 ]
il3945_store_measurement() calls il3945_get_measurement() which internally
calls il_send_cmd_sync() without holding il->mutex. However,
il_send_cmd_sync() has lockdep_assert_held(&il->mutex) indicating that
callers must hold this lock.
Other sysfs store functions in the same file properly acquire the mutex:
- il3945_store_flags() acquires mutex at 3945-mac.c:3110
- il3945_store_filter_flags() acquires mutex at 3945-mac.c:3144
Add mutex_lock()/mutex_unlock() around the il3945_get_measurement() call
in the sysfs store function to fix the missing lock protection.
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Link: https://patch.msgid.link/20260125193005.1090429-1-n7l8m4@u.northwestern.edu
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e31fa691d0 ]
il4965_store_tx_power() calls il_set_tx_power() without holding il->mutex.
However, il_set_tx_power() has lockdep_assert_held(&il->mutex) indicating
that callers must hold this lock.
All other callers of il_set_tx_power() properly acquire the mutex:
- il_bg_scan_completed() acquires mutex at common.c:1683
- il_mac_config() acquires mutex at common.c:5006
- il3945_commit_rxon() and il4965_commit_rxon() are called via work
queues that hold the mutex (like il4965_bg_alive_start)
Add mutex_lock()/mutex_unlock() around the il_set_tx_power() call in
the sysfs store function to fix the missing lock protection.
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Link: https://patch.msgid.link/20260125194039.1196488-1-n7l8m4@u.northwestern.edu
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e3ad987e9d ]
The 'index' variable in the rs_fill_link_cmd() function can reach
LINK_QUAL_MAX_RETRY_NUM during the execution of the inner loop. This
variable is used as an index for the lq_cmd->rs_table array, which has a
size of LINK_QUAL_MAX_RETRY_NUM, without proper validation.
Modify the condition of the inner loop to ensure that the 'index' variable
does not exceed LINK_QUAL_MAX_RETRY_NUM - 1, thereby preventing any
potential overflow issues.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Rand Deeb <rand.sec96@gmail.com>
Link: https://patch.msgid.link/20240313101755.269209-1-rand.sec96@gmail.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 422850b29e ]
If no frames are received on a queue for a while, the reorder buffer
head_sn may be an old one. When the next frame that is received on
that queue and buffered is a subframe of an AMSDU but not the last
subframe, it will not update the buffer's head_sn. When the frame
release notification arrives, it will not release the buffered frame
because it will look like the notification's NSSN is lower than the
buffer's head_sn (because of a wraparound).
Fix it by updating the head_sn when the first frame is buffered.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Reviewed-by: Daniel Gabay <daniel.gabay@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250723094230.795ec0cb8817.I9ec9a3508e7935e8d1833ea3e086066fdefee644@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b2e709805c ]
The FW is now responsible of determining the SMPS mode.
If the user disabled power save in a certain vif, we send the vif-level
power command to clear out the POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK bit
for that vif.
But erroneously, the FW checks DEVICE_POWER_FLAGS_POWER_SAVE_ENA_MSK in
the device-level command to determine the SMPS mode.
To W/A this, send also the device-level command when the power save of a
vif changes, and disable power save if there is any vif that has power
save disabled.
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250308231427.7bf205efa027.I2c793ff1fc2a6779a95faaee1ded348100fd97f1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7774e39200 ]
The firmware dumps can be pretty big, and since we use single
pages for each SG table entry, even the table itself may end
up being an order-5 allocation. Build chained tables so that
we need not allocate a higher-order table here.
This could be improved and cleaned up, e.g. by using the SG
pool code or simply kvmalloc(), but all of that would require
also updating the devcoredump first since that frees it all,
so we need to be more careful. SG pool might also run against
the CONFIG_ARCH_NO_SG_CHAIN limitation, which is irrelevant
here.
Also use _devcd_free_sgtable() for the error paths now, much
simpler especially since it's in two places now.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250209143303.697c7a465ac9.Iea982df46b5c075bfb77ade36f187d99a70c63db@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b8c8a03e9b ]
When MSI-X is not enabled, we mask all the interrupts in the interrupt
handler and re-enable them when the interrupt thread runs. If
STATUS_INT_ENABLED is not set, we won't re-enable in the thread.
In order to get the ALIVE interrupt, we allow the ALIVE interrupt
itself, and RX as well in order to receive the ALIVE notification (which
is received as an RX from the firmware.
The problem is that STATUS_INT_ENABLED is clear until the op_mode calls
trans_fw_alive which means that until trans_fw_alive is called, any
notification from the firmware will not be received.
This became a problem when we inserted the pnvm_load exactly between the
ALIVE and trans_fw_alive.
Fix that by calling trans_fw_alive before loading the PNVM. This will
allow to get the notification from the firmware about PNVM load being
complete and continue the flow normally.
This didn't happen on MSI-X because we don't disable the interrupts in
the ISR when MSI-X is available.
The error in the log looks like this:
iwlwifi 0000:00:03.0: Timeout waiting for PNVM load!
iwlwifi 0000:00:03.0: Failed to start RT ucode: -110
iwlwifi 0000:00:03.0: WRT: Collecting data: ini trigger 13 fired (delay=0ms).
Fixes: 70d3ca86b0 ("iwlwifi: mvm: ring the doorbell and wait for PNVM load completion")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250306122425.0f2cf207aae1.I025d8f724b44f52eadf6c19069352eb9275613a8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f9751163bf ]
If the firmware fails to start the session protection, then we
do call iwl_mvm_roc_finished() here, but that won't do anything
at all because IWL_MVM_STATUS_ROC_P2P_RUNNING was never set.
Set IWL_MVM_STATUS_ROC_P2P_RUNNING in the failure/stop path.
If it started successfully before, it's already set, so that
doesn't matter, and if it didn't start it needs to be set to
clean up.
Not doing so will lead to a WARN_ON() later on a fresh remain-
on-channel, since the link is already active when activated as
it was never deactivated.
Fixes: 35c1bbd93c ("wifi: iwlwifi: mvm: remove IWL_MVM_STATUS_NEED_FLUSH_P2P")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250209143303.0fe36c291068.I67f5dac742170dd937f11e4d4f937f45f71b7cb4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80e96206a3 ]
A caller of iwl_acpi_get_dsm_object must free the returned object.
iwl_acpi_get_dsm_integer returns immediately without freeing
it if the expected size is more than 8 bytes. Fix that.
Note that with the current code this will never happen, since the caller
of iwl_acpi_get_dsm_integer already checks that the expected size if
either 1 or 4 bytes, so it can't exceed 8 bytes.
While at it, print the DSM value instead of the return value, as this
was the intention in the first place.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241228223206.bf61eaab99f8.Ibdc5df02f885208c222456d42c889c43b7e3b2f7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit cc0c53f4fa upstream.
Both struct cfg80211_wowlan_nd_match and struct cfg80211_wowlan_nd_info
pre-allocate space for channels and matches, but then may end up using
fewer that the full allocation. Shrink the associated counter
(n_channels and n_matches) after counting the results. This avoids
compile-time (and run-time) warnings from __counted_by. (The counter
member needs to be updated _before_ accessing the array index.)
Seen with coming GCC 15:
drivers/net/wireless/intel/iwlwifi/mvm/d3.c: In function 'iwl_mvm_query_set_freqs':
drivers/net/wireless/intel/iwlwifi/mvm/d3.c:2877:66: warning: operation on 'match->n_channels' may be undefined [-Wsequence-point]
2877 | match->channels[match->n_channels++] =
| ~~~~~~~~~~~~~~~~~^~
drivers/net/wireless/intel/iwlwifi/mvm/d3.c:2885:66: warning: operation on 'match->n_channels' may be undefined [-Wsequence-point]
2885 | match->channels[match->n_channels++] =
| ~~~~~~~~~~~~~~~~~^~
drivers/net/wireless/intel/iwlwifi/mvm/d3.c: In function 'iwl_mvm_query_netdetect_reasons':
drivers/net/wireless/intel/iwlwifi/mvm/d3.c:2982:58: warning: operation on 'net_detect->n_matches' may be undefined [-Wsequence-point]
2982 | net_detect->matches[net_detect->n_matches++] = match;
| ~~~~~~~~~~~~~~~~~~~~~^~
Cc: stable@vger.kernel.org
Fixes: aa4ec06c45 ("wifi: cfg80211: use __counted_by where appropriate")
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/20240619211233.work.355-kees@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
