[ Upstream commit 080e5563f8 ]
The len parameter in dlm_dump_rsb_name() is not validated and comes
from network messages. When it exceeds DLM_RESNAME_MAXLEN, it can
cause out-of-bounds write in dlm_search_rsb_tree().
Add length validation to prevent potential buffer overflow.
Signed-off-by: Ezrak1e <ezrakiez@gmail.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03d2b62208 ]
This patch bypasses multi-link errors in TCP mode, allowing dlm
to operate on the first tcp link.
Signed-off-by: Heming Zhao <heming.zhao@suse.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a3672304ab upstream.
If an active rsb is not hashed anymore and this could occur because we
releases and acquired locks we need to signal the followed code that
the lookup failed. Since the lookup was successful, but it isn't part of
the rsb hash anymore we need to signal it by setting error to -EBADR as
dlm_search_rsb_tree() does it.
Cc: stable@vger.kernel.org
Fixes: 5be323b0c6 ("dlm: move dlm_search_rsb_tree() out of lock")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 94e6e889a7 upstream.
If an inactive rsb is not hashed anymore and this could occur because we
releases and acquired locks we need to signal the followed code that the
lookup failed. Since the lookup was successful, but it isn't part of the
rsb hash anymore we need to signal it by setting error to -EBADR as
dlm_search_rsb_tree() does it.
Cc: stable@vger.kernel.org
Fixes: 01fdeca1cc ("dlm: use rcu to avoid an extra rsb struct lookup")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 57cdd1a1cf ]
The return type of srcu_read_lock() is int and not bool. Whereas we
using the ret variable only to evaluate a bool type of
dlm_lowcomms_con_has_addr() to check if an address is already being set.
Fixes: 6f0b0b5d7a ("fs: dlm: remove dlm_node_addrs lookup list")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 134129520b ]
An rsb struct was not being removed in the case where it
was both the master and the dir record. This case (master
and dir node) was missed in the condition for doing add_scan()
from deactivate_rsb(). Fixing this triggers a related WARN_ON
that needs to be fixed, and requires adjusting where two
del_scan() calls are made.
Fixes: c217adfc8c ("dlm: fix add_scan and del_scan usage")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b98333c67d ]
This patch fixes a possible null pointer dereference when this function is
called from request_lock() as lkb->lkb_resource is not assigned yet,
only after validate_lock_args() by calling attach_lkb(). Another issue
is that a resource name could be a non printable bytearray and we cannot
assume to be ASCII coded.
The log functionality is probably never being hit when DLM is used in
normal way and no debug logging is enabled. The null pointer dereference
can only occur on a new created lkb that does not have the resource
assigned yet, it probably never hits the null pointer dereference but we
should be sure that other changes might not change this behaviour and we
actually can hit the mentioned null pointer dereference.
In this patch we just drop the printout of the resource name, the lkb id
is enough to make a possible connection to a resource name if this
exists.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 200b977ebb ]
If dlm_recover_members() fails we don't drop the references of the
previous created root_list that holds and keep all rsbs alive during the
recovery. It might be not an unlikely event because ping_members() could
run into an -EINTR if another recovery progress was triggered again.
Fixes: 3a747f4a2e ("dlm: move rsb root_list to ls_recover() stack")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d59f2fbfb ]
The arguments got swapped by commit 986ae3c2a8 ("dlm: fix race between
final callback and remove") fixing this now.
Fixes: 986ae3c2a8 ("dlm: fix race between final callback and remove")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
no_llseek had been defined to NULL two years ago, in commit 868941b144
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To avoid -EINPROGRESS cases on connect that just ends in a retry we just
call connect in a synchronized way to wait until its done. Since commit
dbb751ffab ("fs: dlm: parallelize lowcomms socket handling") we have a
non ordered workqueue running for serving the DLM sockets that allows us
to call send/recv for each DLM socket connection in parallel. Before
each worker needed to wait until the previous worker was done and
probably the reason why connect() was called in an asynchronous way to
not block other workers. This is however not necessary anymore as other
socket handling workers don't need to wait.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch moves the xarray lookup functionality for the lkb out of the
ls_lkbxa_lock read lock handling. We can do that as the xarray should be
possible to access lockless in case of reader like xa_load(). We confirm
under ls_lkbxa_lock that the lkb is still part of the data structure and
take a reference when its still part of ls_lkbxa to avoid being freed
after doing the lookup. To do a check if the lkb is still part of the
ls_lkbxa data structure we use a kref_read() as the last put will remove
it from the ls_lkbxa data structure and any reference taken means it is
still part of ls_lkbxa.
A similar approach was done with the DLM rsb rhashtable just with a flag
instead of the refcounter because the refcounter has a slightly
different meaning.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
The rhashtable structure is lockless for readers such as
rhashtable_lookup_fast(). It should be save to call this lookup
functionality out of holding ls_rsbtbl_lock to get the rsb pointer out
of the hash. This reduce the contention time of ls_rsbtbl_lock in some
cases. We still need to check if the rsb is part of the check as this
state can be changed while ls_rsbtbl_lock is not held. If its part of
the rhashtable data structure we take a reference to be sure it will not
be freed after we drop the ls_rsbtbl_lock read lock.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Since commit 01fdeca1cc ("dlm: use rcu to avoid an extra rsb struct
lookup") _dlm_master_lookup() is called under rcu lock that prevents
that the rsb structure is being freed. There was a missing change to
avoid an additional lookup and just check that the rsb is still part of
the ls_rsbtbl structure. This patch is doing such check instead of
lookup the rsb structure again.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch handles freeing of lockspace resources asynchronously besides
the release_lockspace() context. The release_lockspace() context is
sometimes called in a time critical context, e.g. umount syscall. Most
every user space init system will timeout if it takes too long. To
reduce the potential waiting time we deregister in release_lockspace()
the lockspace from the DLM subsystem and do the actual releasing of
lockspace resource in a worker of a workqueue following recommendation
of:
https://lore.kernel.org/all/49925af7-78a8-a3dd-bce6-cfc02e1a9236@I-love.SAKURA.ne.jp/T/#u
as flushing of system workqueues are not allowed. The most time to
release the DLM resources are spent to release the data structures
"ls->ls_lkbxa" and "ls->ls_rsbtbl" as they iterate over each entries and
those data structures can contain millions of entries. This patch handles
for now only freeing of those data structures as those operations are
the most reason why release_lockspace() blocking of being returned.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch removes the releasing of the "struct dlm ls" resource out of
the kobject handling. Instead we run kfree() after kobject_put() of the
lockspace kobject structure that should always being the last put call.
This prepares to split the releasing of all lockspace resources
asynchronously in the background and just deregister everything in
release_lockspace().
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds a warn on if is_master() and dlm_is_removed() checks on
invalid nodeid states that are probably not what the caller wants to do
here. The is_master() function checking on r->res_nodeid is invalid when
it is set to -1, whereas the dlm_is_removed() has a different meaning
as "nodeid member" and also 0 is invalid.
We run into these cases and this patch changes those cases as we never
will run into them. There should be no functional changes as the
condition should return the same result. However this patch signals now
on caller level that there might be an "extra" case to handle here.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will remote the return of an invalid nodeid value when
local_comm is not set. This case should never happen as the DLM stack
tries to compare valid nodeids with an invalid nodeid returned by
dlm_our_nodeid(). Instead we let it crash to getting at least recognized
if we running into such state.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch removes unnecessary refcounts that are obviously not
necessary because either when the pointer is passed as parameter or it
is part of a list we should already hold a reference to it.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch removes a unnecessary parameter from DLM memory allocation
helpers and reduce some functions by just directly reply the pointer
address of the allocated memory.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
In the case we trigger dlm_free_rsb() that does a call_rcu() and the
responding kfree() of res_lvbptr and a kmem_cache_free() of the rsb
pointer we need to wait until this pending operation is done before
calling kmem_cache_destroy(). We doing that by using rcu_barrier() that
waits until all pending call_rcu() are done. This avoids that
kmem_cache_destroy() complains about active objects around that are not
being freed yet by call_rcu().
There is currently more discussions about to make this behaviour better,
see:
https://lore.kernel.org/netdev/20240609082726.32742-1-Julia.Lawall@inria.fr/
However this is only for call_rcu() if the callback calls
kmem_cache_destroy() only to replace it by kfree_rcu() call which has
currently some issue. This isn't our case because we also free the
res_lvbptr if being set.
For our case, to avoid the above race rcu_barrier() should be used before
calling kmem_cache_destroy() to be sure that there are no active objects
around. This is exactly what net/batman-adv is also doing before calling their
kmem_cache_destroy() in module unloading.
Fixes: 01fdeca1cc ("dlm: use rcu to avoid an extra rsb struct lookup")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
The DLM rcom handling has a check that all exflags are the same for the
whole lockspace membership nodes. There are some flags that requires
such handling, however DLM_LSFL_SOFTIRQ does not require this handling
and it should be backwards compatibility with other lockspaces that does
not set this flag.
Fixes: f328a26eeb ("dlm: introduce DLM_LSFL_SOFTIRQ_SAFE")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
The last use of 'dlm_processed_nodes' was removed in
commit 1696c75f18 ("fs: dlm: add send ack threshold and append acks to
msgs").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: David Teigland <teigland@redhat.com>
When a lockspace user allows it, run callback functions directly from
softirq context, instead of queueing callbacks to be run from the
dlm_callback workqueue context.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Introduce a new external lockspace flag DLM_LSFL_SOFTIRQ_SAFE. A
lockspace user will set this flag if it can handle dlm running the
callback functions from softirq context. When not set, dlm will
continue to run callback functions from the dlm_callback workqueue.
The new lockspace flag cannot be used for user space lockspaces, so
a uapi placeholder definition is used for the new flag value.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
The existing external lockspace flag DLM_LSFL_FS is now also
saved as an internal flag LSFL_FS, so it can be checked from
other code locations which want to know if a lockspace is
used from the kernel or user space.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Use rcu to free rsb structs, and hold the rcu read lock
while looking up rsb structs. This allows us to avoid an
extra hash table lookup for an rsb. A new rsb flag HASHED
is added which is set while the rsb is in the hash table.
This flag is checked in place of repeating the hash table
lookup.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Remove a few calls to add_scan() and del_scan() in cases where
the rsb is a dir record, so the rsb should never be placed on
the scan list at all. Add WARN_ON to catch cases where this
is done.
Signed-off-by: David Teigland <teigland@redhat.com>
The old terminology of "toss" and "keep" is no longer an
accurate description of the rsb states and lists, so change
the names to "inactive" and "active". The old names had
also been copied into the scanning code, which is changed
back to use the "scan" name.
- "active" rsb structs have lkb's attached, and are ref counted.
- "inactive" rsb structs have no lkb's attached, are not ref counted.
- "scan" list is for rsb's that can be freed after a timeout period.
- "slow" lists are for infrequent iterations through active or
inactive rsb structs.
- inactive rsb structs that are directory records will not be put
on the scan list, since they are not freed based on timeouts.
- inactive rsb structs that are not directory records will be
put on the scan list to be freed, since they are not longer needed.
Signed-off-by: David Teigland <teigland@redhat.com>
According to kdoc idr is deprecated and xarrays should be used nowadays.
This patch is moving the recover idr implementation to xarray
datastructure.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
According to kernel doc idr is deprecated and xarrays should be used
nowadays. This patch is moving the lkb idr implementation to xarrays.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch drops the own written rsb pre allocation mechanism as this is
already done by using kmem caches, we don't need another layer on top of
that to running some pre allocation scheme.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch removes ls_local_handle from struct dlm_ls as it stores the
ls pointer of the top level structure itesef and this isn't necessary.
There is a lookup functionality to lookup the lockspace in
dlm_find_lockspace_local() but the given input parameter is the pointer
already. This might be more safe to lookup a lockspace but given a wrong
lockspace pointer is a bug in the code and we save the additional lookup
here. The dlm_ls structure can be still hidden by using dlm_lockspace_t
handle pointer.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch removes an parameter which is currently not used by
dlm_midcomms_addr().
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch removes a kref_init() that isn't necessary because the rsb is
created for toss list. Under toss list the rsb should not have any
reference counting logic. If in theory the rsb gets to into keep list
then a kref_init() for res_ref will be initiated.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch removes some leftover related code from dlm_scand that was
dropped in commit b1f2381c1a ("dlm: drop dlm_scand kthread and use
timers").
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch changes the orphans mutex to a spinlock since commit
c288745f1d ("dlm: avoid blocking receive at the end of recovery") is
using a rwlock_t to lock the DLM message receive path and do_purge() can
be called while this lock is held that forbids to sleep.
We need to use spin_lock_bh() because also a user context that calls
dlm_user_purge() can call do_purge() and since commit 92d59adfaf
("dlm: do message processing in softirq context") the DLM message
receive path is done under softirq context.
Fixes: c288745f1d ("dlm: avoid blocking receive at the end of recovery")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/gfs2/9ad928eb-2ece-4ad9-a79c-d2bce228e4bc@moroto.mountain/
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Convert the lock for lkbidr to an rwlock. Most idr lookups will use
the read lock.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
The conversion to rhashtable introduced a hash table lock per lockspace,
in place of per bucket locks. To make this more scalable, switch to
using a rwlock for hash table access. The common case fast path uses
it as a read lock.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Currently the scand kthread acts like a garbage collection for expired
rsbs on toss list, to clean them up after a certain timeout. It triggers
every couple of seconds and iterates over the toss list while holding
ls_rsbtbl_lock for the whole hash bucket iteration.
To reduce the amount of time holding ls_rsbtbl_lock, we now handle the
disposal of expired rsbs using a per-lockspace timer that expires for the
earliest tossed rsb on the lockspace toss queue. This toss queue is
ordered according to the rsb res_toss_time with the earliest tossed rsb
as the first entry. The toss timer will only trylock() necessary locks,
since it is low priority garbage collection, and will rearm the timer
if trylock() fails. If the timer function does not find any expired
rsb's, it rearms the timer with the next earliest expired rsb.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
In the past we had problems when an rsb had a reference counter greater
than one while in the toss state. An rsb in the toss state is not
actively used for locking, and should not have any other references
apart from the single ref keeping it on the rsb hash. Shift to freeing
rsb's directly rather than using kref_put to free them, since the ref
counting is not meant to be used in this state. Add warnings if ref
counting is seen while an rsb is in the toss state.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Replace our own hash table with the more advanced rhashtable
for keeping rsb structs.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
To prepare for using rhashtable, add two rsb lists for iterating
through rsb's in two uncommon cases where this is necesssary:
- when dumping rsb state from debugfs, now using seq_list.
- when looking at all rsb's during recovery.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
There are several places where lock processing can perform two hash table
lookups, first in the "keep" list, and if not found, in the "toss" list.
This patch introduces a new rsb state flag "RSB_TOSS" to represent the
difference between the state of being on keep vs toss list, so that the
two lists can be combined. This avoids cases of two lookups.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Prepare to replace our own hash table with rhashtable by replacing
the per-bucket locks in our own hash table with a single lock.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Increment the ls_count value while dlm_scand is processing a
lockspace so that release_lockspace()/remove_lockspace() will
wait for dlm_scand to finish.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Move dlm message processing from an ordered workqueue context to an
ordered softirq context. Handling dlm messages in softirq will allow
requests to be cleared more quickly and efficiently, and should avoid
longer queues of incomplete requests. Later patches are expected to
run completion/blocking callbacks directly from this message processing
context, further reducing context switches required to complete a request.
In the longer term, concurrent message processing could be implemented.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
