[ Upstream commit e411d74cc5 ]
In gfs2_fiemap(), we are calling iomap_fiemap() while holding the inode
glock. This can lead to recursive glock taking if the fiemap buffer is
memory mapped to the same inode and accessing it triggers a page fault.
Fix by disabling page faults for iomap_fiemap() and faulting in the
buffer by hand if necessary.
Fixes xfstest generic/742.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit faddeb8483 ]
The inline data buffer head (dibh) is being released prematurely in
gfs2_iomap_begin() via release_metapath() while iomap->inline_data
still points to dibh->b_data. This causes a use-after-free when
iomap_write_end_inline() later attempts to write to the inline data
area.
The bug sequence:
1. gfs2_iomap_begin() calls gfs2_meta_inode_buffer() to read inode
metadata into dibh
2. Sets iomap->inline_data = dibh->b_data + sizeof(struct gfs2_dinode)
3. Calls release_metapath() which calls brelse(dibh), dropping refcount
to 0
4. kswapd reclaims the page (~39ms later in the syzbot report)
5. iomap_write_end_inline() tries to memcpy() to iomap->inline_data
6. KASAN detects use-after-free write to freed memory
Fix by storing dibh in iomap->private and incrementing its refcount
with get_bh() in gfs2_iomap_begin(). The buffer is then properly
released in gfs2_iomap_end() after the inline write completes,
ensuring the page stays alive for the entire iomap operation.
Note: A C reproducer is not available for this issue. The fix is based
on analysis of the KASAN report and code review showing the buffer head
is freed before use.
[agruenba: Take buffer head reference in gfs2_iomap_begin() to avoid
leaks in gfs2_iomap_get() and gfs2_iomap_alloc().]
Reported-by: syzbot+ea1cd4aa4d1e98458a55@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=ea1cd4aa4d1e98458a55
Fixes: d0a22a4b03 ("gfs2: Fix iomap write page reclaim deadlock")
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 22150a7d40 ]
Commit a475c5dd16 ("gfs2: Free quota data objects synchronously")
started freeing quota data objects during filesystem shutdown instead of
putting them back onto the LRU list, but it failed to remove these
objects from the LRU list, causing LRU list corruption. This caused
use-after-free when the shrinker (gfs2_qd_shrink_scan) tried to access
already-freed objects on the LRU list.
Fix this by removing qd objects from the LRU list before freeing them in
qd_put().
Initial fix from Deepanshu Kartikey <kartikey406@gmail.com>.
Fixes: a475c5dd16 ("gfs2: Free quota data objects synchronously")
Reported-by: syzbot+046b605f01802054bff0@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=046b605f01802054bff0
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 11d763f0b0 ]
Fix a bug in gfs2's asynchronous glock handling for rename and exchange
operations. The original async implementation from commit ad26967b9a
("gfs2: Use async glocks for rename") mentioned that retries were needed
but never implemented them, causing operations to fail with -ESTALE
instead of retrying on timeout.
Also makes the waiting interruptible.
In addition, the timeouts used were too high for situations in which
timing out is a rare but expected scenario. Switch to shorter timeouts
with randomization and exponentional backoff.
Fixes: ad26967b9a ("gfs2: Use async glocks for rename")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 469d71512d upstream.
This reverts commit 8a157e0a0a.
That commit incorrectly assumed that the bio_chain() arguments were
swapped in gfs2. However, gfs2 intentionally constructs bio chains so
that the first bio's bi_end_io callback is invoked when all bios in the
chain have completed, unlike bio chains where the last bio's callback is
invoked.
Fixes: 8a157e0a0a ("gfs2: Fix use of bio_chain")
Cc: stable@vger.kernel.org
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4cfc7d5a4a ]
After commit b77b4a4815 ("gfs2: Rework freeze / thaw logic"),
the freeze error handling is broken because gfs2_do_thaw()
overwrites the 'error' variable, causing incorrect processing
of the original freeze error.
Fix this by calling gfs2_do_thaw() when gfs2_lock_fs_check_clean()
fails but ignoring its return value to preserve the original
freeze error for proper reporting.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: b77b4a4815 ("gfs2: Rework freeze / thaw logic")
Cc: stable@vger.kernel.org # v6.5+
Signed-off-by: Alexey Velichayshiy <a.velichayshiy@ispras.ru>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
[ gfs2_do_thaw() only takes 2 params ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8a157e0a0a ]
In gfs2_chain_bio(), the call to bio_chain() has its arguments swapped.
The result is leaked bios and incorrect synchronization (only the last
bio will actually be waited for). This code is only used during mount
and filesystem thaw, so the bug normally won't be noticeable.
Reported-by: Stephen Zhang <starzhangzsd@gmail.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dff1fb6d8b ]
Commit e4a8b5481c ("gfs2: Switch to wait_event in gfs2_quotad") broke
cyclic statfs syncing, so the numbers reported by "df" could easily get
completely out of sync with reality. Fix this by reverting part of
commit e4a8b5481c for now.
A follow-up commit will clean this code up later.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64c10ed927 ]
When a node tries to delete an inode, it first requests exclusive access
to the iopen glock. This triggers demote requests on all remote nodes
currently holding the iopen glock. To satisfy those requests, the
remote nodes evict the inode in question, or they poke the corresponding
inode glock to signal that the inode is still in active use.
This behavior doesn't depend on whether or not a filesystem is
read-only, so remove the incorrect read-only check.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c5f4a5347 ]
Function new_inode() returns a new inode with inode->i_mapping->gfp_mask
set to GFP_HIGHUSER_MOVABLE. This value includes the __GFP_FS flag, so
allocations in that address space can recurse into filesystem memory
reclaim. We don't want that to happen because it can consume a
significant amount of stack memory.
Worse than that is that it can also deadlock: for example, in several
places, gfs2_unstuff_dinode() is called inside filesystem transactions.
This calls filemap_grab_folio(), which can allocate a new folio, which
can trigger memory reclaim. If memory reclaim recurses into the
filesystem and starts another transaction, a deadlock will ensue.
To fix these kinds of problems, prevent memory reclaim from recursing
into filesystem code by making sure that the gfp_mask of inode address
spaces doesn't include __GFP_FS.
The "meta" and resource group address spaces were already using GFP_NOFS
as their gfp_mask (which doesn't include __GFP_FS). The default value
of GFP_HIGHUSER_MOVABLE is less restrictive than GFP_NOFS, though. To
avoid being overly limiting, use the default value and only knock off
the __GFP_FS flag. I'm not sure if this will actually make a
difference, but it also shouldn't hurt.
This patch is loosely based on commit ad22c7a043 ("xfs: prevent stack
overflows from page cache allocation").
Fixes xfstest generic/273.
Fixes: dc0b943523 ("gfs: Don't use GFP_NOFS in gfs2_unstuff_dinode")
Reviewed-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 28c4d9bc07 ]
In gdlm_put_lock(), there is a small window of time in which the
DFL_UNMOUNT flag has been set but the lockspace hasn't been released,
yet. In that window, dlm may still call gdlm_ast() and gdlm_bast().
To prevent it from dereferencing freed glock objects, only free the
glock if the lockspace has actually been released.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 061df28b82 ]
Commit 865cc3e9cc ("gfs2: fix a deadlock on withdraw-during-mount")
added a statement to do_xmote() to clear the GLF_INVALIDATE_IN_PROGRESS
flag a second time after it has already been cleared. Fix that.
Fixes: 865cc3e9cc ("gfs2: fix a deadlock on withdraw-during-mount")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5c8f12cf1e ]
Clears up the warning added in 7ee3647243 ("migrate: Remove call to
->writepage") that occurs in various xfstests, causing "something found
in dmesg" failures.
[ 341.136573] gfs2_meta_aops does not implement migrate_folio
[ 341.136953] WARNING: CPU: 1 PID: 36 at mm/migrate.c:944 move_to_new_folio+0x2f8/0x300
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 557c024ca7 ]
A fuzzer test introduced corruption that ends up with a depth of 0 in
dir_e_read(), causing an undefined shift by 32 at:
index = hash >> (32 - dip->i_depth);
As calculated in an open-coded way in dir_make_exhash(), the minimum
depth for an exhash directory is ilog2(sdp->sd_hash_ptrs) and 0 is
invalid as sdp->sd_hash_ptrs is fixed as sdp->bsize / 16 at mount time.
So we can avoid the undefined behaviour by checking for depth values
lower than the minimum in gfs2_dinode_in(). Values greater than the
maximum are already being checked for there.
Also switch the calculation in dir_make_exhash() to use ilog2() to
clarify how the depth is calculated.
Tested with the syzkaller repro.c and xfstests '-g quick'.
Reported-by: syzbot+4708579bb230a0582a57@syzkaller.appspotmail.com
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit deb016c166 ]
When a node withdraws and it turns out that it is the only node that has
the filesystem mounted, gfs2 currently tries to replay the local journal
to bring the filesystem back into a consistent state. Not only is that
a very bad idea, it has also never worked because gfs2_recover_func()
will refuse to do anything during a withdraw.
However, before even getting to this point, gfs2_recover_func()
dereferences sdp->sd_jdesc->jd_inode. This was a use-after-free before
commit 04133b607a ("gfs2: Prevent double iput for journal on error")
and is a NULL pointer dereference since then.
Simply get rid of self recovery to fix that.
Fixes: 601ef0d52e ("gfs2: Force withdraw to replay journals and wait for it to finish")
Reported-by: Chunjie Zhu <chunjie.zhu@cloud.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a90f8d499 ]
Commit 8d391972ae ("gfs2: Remove __gfs2_writepage()") changed the log
flush code in gfs2_ail1_start_one() to call aops->writepages() instead
of aops->writepage(). For jdata inodes, this means that we will now try
to reserve log space and start a transaction before we can determine
that the pages in question have already been journaled. When this
happens in the context of gfs2_logd(), it can now appear that not enough
log space is available for freeing up log space, and we will lock up.
Fix that by issuing journal writes directly instead of going through
aops->writepages() in the log flush code.
Fixes: 8d391972ae ("gfs2: Remove __gfs2_writepage()")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d50a64e3c5 ]
Move gfs2_trans_add_databufs() to trans.c. Pass in a glock instead of
a gfs2_inode.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Stable-dep-of: 5a90f8d499 ("gfs2: Don't start unnecessary transactions during log flush")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c63986dd3 ]
When creating and destroying inodes, we are relying on the inode hash
table to make sure that for a given inode number, only a single inode
will exist. We then link that inode to its inode and iopen glock and
let those glocks point back at the inode. However, when iget_failed()
is called, the inode is removed from the inode hash table before
gfs_evict_inode() is called, and uniqueness is no longer guaranteed.
Commit f1046a472b70 ("gfs2: gl_object races fix") was trying to work
around that problem by detaching the inode glock from the inode before
calling iget_failed(), but that broke the inode deallocation code in
gfs_evict_inode().
To fix that, deallocate partially created inodes in gfs2_create_inode()
instead of relying on gfs_evict_inode() for doing that.
This means that gfs2_evict_inode() and its helper functions will no
longer see partially created inodes, and so some simplifications are
possible there.
Fixes: 9ffa18884c ("gfs2: gl_object races fix")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0cc617a54d ]
Don't check for the GIF_ALLOC_FAILED flag in gfs2_ea_dealloc() and pass
that information explicitly instead. This allows for a cleaner
follow-up patch.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Stable-dep-of: 2c63986dd3 ("gfs2: deallocate inodes in gfs2_create_inode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bcd18105fb ]
Move gfs2_dinode_dealloc() and its helper gfs2_final_release_pages()
from super.c to inode.c.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Stable-dep-of: 2c63986dd3 ("gfs2: deallocate inodes in gfs2_create_inode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3774f53d7f ]
Having this flag attached to the iopen glock instead of the inode is
much simpler; it eliminates a protential weird race in gfs2_try_evict().
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Stable-dep-of: 2c63986dd3 ("gfs2: deallocate inodes in gfs2_create_inode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8bbfde0875 ]
Introduce a new GLF_PENDING_REPLY flag to indicate that a reply from DLM
is expected. Include that flag in glock dumps to show more clearly
what's going on. (When the GLF_PENDING_REPLY flag is set, the GLF_LOCK
flag will also be set but the GLF_LOCK flag alone isn't sufficient to
tell that we are waiting for a DLM reply.)
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Stable-dep-of: 2c63986dd3 ("gfs2: deallocate inodes in gfs2_create_inode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5788253392 ]
Add a number of glock flags are currently not shown in the text form of
glock tracepoints.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Stable-dep-of: 2c63986dd3 ("gfs2: deallocate inodes in gfs2_create_inode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ffd1cf0443 ]
When a request to evict an inode comes in over the network, we are
trying to grab an inode reference via the iopen glock's gl_object
pointer. There is a very small probability that by the time such a
request comes in, inode creation hasn't completed and the I_NEW flag is
still set. To deal with that, wait for the inode and then check if
inode creation was successful.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Stable-dep-of: 2c63986dd3 ("gfs2: deallocate inodes in gfs2_create_inode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c79ba4be35 ]
Rename enum dinode_demise to evict_behavior and its items
SHOULD_DELETE_DINODE to EVICT_SHOULD_DELETE,
SHOULD_NOT_DELETE_DINODE to EVICT_SHOULD_SKIP_DELETE, and
SHOULD_DEFER_EVICTION to EVICT_SHOULD_DEFER_DELETE.
In gfs2_evict_inode(), add a separate variable of type enum
evict_behavior instead of implicitly casting to int.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Stable-dep-of: 2c63986dd3 ("gfs2: deallocate inodes in gfs2_create_inode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9fb794aac6 ]
The GIF_DEFERRED_DELETE flag indicates an action that gfs2_evict_inode()
should take, so rename the flag to GIF_DEFER_DELETE to clarify.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Stable-dep-of: 2c63986dd3 ("gfs2: deallocate inodes in gfs2_create_inode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1072b3aa68 ]
Set gl_no_formal_ino of the iopen glock to the generation of the
associated inode (ip->i_no_formal_ino) as soon as that value is known.
This saves us from setting it later, possibly repeatedly, when queuing
GLF_VERIFY_DELETE work.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Stable-dep-of: 2c63986dd3 ("gfs2: deallocate inodes in gfs2_create_inode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ac5ee087d3 upstream.
This patch moves the msleep_interruptible() out of the non-sleepable
context by moving the ls->ls_recover_spin spinlock around so
msleep_interruptible() will be called in a sleepable context.
Cc: stable@vger.kernel.org
Fixes: 4a7727725d ("GFS2: Fix recovery issues for spectators")
Suggested-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9126d2754c upstream.
When gfs2_sys_fs_add() fails, it sets sb->s_fs_info to NULL on its error
path (see commit 0d515210b6 ("GFS2: Add kobject release method")).
The intention seems to be to prevent dereferencing sb->s_fs_info once
the object pointed to has been deallocated, but that would be better
achieved by setting the pointer to NULL in free_sbd().
As a consequence, when the call to gfs2_sys_fs_add() fails in
gfs2_fill_super(), sdp = GFS2_SB(inode) will evaluate to NULL in iput()
-> gfs2_drop_inode(), and accessing sdp->sd_flags will be a NULL pointer
dereference.
Fix that by only setting sb->s_fs_info to NULL when actually freeing the
object pointed to in free_sbd().
Fixes: ae9f3bd825 ("gfs2: replace sd_aspace with sd_inode")
Reported-by: syzbot+b12826218502df019f9d@syzkaller.appspotmail.com
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 62a2175ddf ]
The filesystem's freeze/thaw functions can be called from contexts where
the holder isn't userspace but the kernel, e.g., during systemd
suspend/hibernate. So pass through the freeze/thaw flags from the VFS
instead of hard-coding them.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af4044fd0b ]
When gfs2_create_inode() finds a directory, make sure to return -EISDIR.
Fixes: 571a4b5797 ("GFS2: bugger off early if O_CREAT open finds a directory")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae9f3bd825 ]
Currently, sdp->sd_aspace and the per-inode metadata address spaces use
sb->s_bdev->bd_mapping->host as their ->host; folios in those address
spaces will thus appear to be on bdev rather than on gfs2 filesystems.
This is a problem because gfs2 doesn't support cgroup writeback
(SB_I_CGROUPWB), but bdev does.
Fix that by using a "dummy" gfs2 inode as ->host in those address
spaces. When coming from a folio, folio->mapping->host->i_sb will then
be a gfs2 super block and the SB_I_CGROUPWB flag will not be set in
sb->s_iflags.
Based on a previous version from Bob Peterson from several years ago.
Thanks to Tetsuo Handa, Jan Kara, and Rafael Aquini for helping figure
this out.
Fixes: aaa2cacf81 ("writeback: add lockdep annotation to inode_to_wb()")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d838605fea ]
In run_queue(), check if the queue of pending requests is empty instead
of blindly assuming that it won't be.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7c9d922380 upstream.
Truncate an inode's address space when flipping the GFS2_DIF_JDATA flag:
depending on that flag, the pages in the address space will either use
buffer heads or iomap_folio_state structs, and we cannot mix the two.
Reported-by: Kun Hu <huk23@m.fudan.edu.cn>, Jiaji Qin <jjtan24@m.fudan.edu.cn>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7c6f714d88 ]
Before commit f0e56edc2e ("gfs2: Split the two kinds of glock "delete"
work"), function delete_work_func() was used to trigger the eviction of
in-memory inodes from remote as well as deleting unlinked inodes at a
later point. These two kinds of work were then split into two kinds of
work, and the two places in the code were deferred deletion of inodes is
required accidentally ended up queuing the wrong kind of work. This
caused unlinked inodes to be left behind, which could in the worst case
fill up filesystems and require a filesystem check to recover.
Fix that by queuing the right kind of work in try_rgrp_unlink() and
gfs2_drop_inode().
Fixes: f0e56edc2e ("gfs2: Split the two kinds of glock "delete" work")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 160bc9555d ]
Add an argument to gfs2_queue_verify_delete() that allows it to queue
GLF_VERIFY_DELETE work for immediate execution. This is used in the
next patch.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Stable-dep-of: 7c6f714d88 ("gfs2: Fix unlinked inode cleanup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 820ce8ed53 ]
Rename the GLF_VERIFY_EVICT flag to GLF_VERIFY_DELETE: that flag
indicates that we want to delete an inode / verify that it has been
deleted.
To match, rename gfs2_queue_verify_evict() to
gfs2_queue_verify_delete().
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Stable-dep-of: 7c6f714d88 ("gfs2: Fix unlinked inode cleanup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pull gfs2 update from Andreas Gruenbacher:
- Convert the writepage address space operation to writepages (Matthew
Wilcox)
- A syzkaller fix (by Julian Sun) and a minor cleanup (Andreas
Gruenbacher)
* tag 'gfs2-v6.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Remove gfs2_aspace_writepage()
gfs2: Remove gfs2_jdata_writepage()
gfs2: Remove __gfs2_writepage()
gfs2: Add gfs2_aspace_writepages()
gfs2: fix double destroy_workqueue error
gfs2: Minor gfs2_glock_cb cleanup
In order to switch fuse over to using iomap for buffered writes we need
to be able to have the struct file for the original write, in case we
have to read in the page to make it uptodate. Handle this by using the
existing private field in the iomap_iter, and add the argument to
iomap_file_buffered_write. This will allow us to pass the file in
through the iomap buffered write path, and is flexible for any other
file systems needs.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/7f55c7c32275004ba00cddf862d970e6e633f750.1724755651.git.josef@toxicpanda.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
There are no remaining callers of gfs2_aspace_writepage() other than
vmscan, which is known to do more harm than good.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
There are no remaining callers of gfs2_jdata_writepage() other than
vmscan, which is known to do more harm than good.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Call aops->writepages() instead of using write_cache_pages() to call
aops->writepage. Change the handling of -ENODATA to not set the
persistent error on the block device.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
This saves one indirect function call per folio and gets us closer to
removing aops->writepage.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
In gfs2_glock_cb(), we only need to calculate the glock hold time for
inode glocks; the value is unused otherwise.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
The logic for determining when to demote a glock in glock_work_func(),
introduced in commit 7cf8dcd3b6 ("GFS2: Automatically adjust glock min
hold time"), doesn't make sense: inode glocks have a minimum hold time
that delays demotion, while all other glocks are expected to be demoted
immediately. Instead of demoting non-inode glocks immediately,
glock_work_func() schedules glock work for them to be demoted, however.
Get rid of that unnecessary indirection.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Since the previous commit, function gfs2_quota_sync() will not cause the
sync generation to creep forward by one every time the function is
called; this helps keep things a but more tidy. We also don't care that
this function allocates a page of memory every time it is called, so no
good reason for keeping qd_changed() anymore, which just duplicates
qd_grab_sync().
This reverts commit 06aa6fd31a.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
The quota sync generation is only ever updated under sd_quota_sync_mutex
by gfs2_quota_sync(), but its current value is fetched ouside of that
mutex, so use WRITE_ONCE() and READ_ONCE() when accessing it without
holding that mutex.
Pass the current sync generation to do_sync() from its callers to ensure
that we're not recording the wrong generation when the syncing is
done. Also, make sure that qd->qd_sync_gen only ever moves forward.
In gfs2_quota_sync(), only write the new sync generation when we know
that there are changes. This eliminates the need for function
sd_changed(), which we will remove in the next commit.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
With the locking the previous patch has introduced for each struct
gfs2_quota_data object, sd_quota_mutex has become largely irrelevant.
By waiting on the buffer head instead of waiting on the mutex in
get_bh(), it becomes completely irrelevant and can be removed.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
