mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2026-04-03 12:05:13 +02:00
0da170b9e600da6930cfb8352e4cc036db3b6159
516 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Andrey Ryabinin
|
0e338c4a3e |
mm/kasan: fix KASAN poisoning in vrealloc()
commit |
||
Maciej Wieczor-Retman
|
365178de51 |
kasan: unpoison vms[area] addresses with a common tag
commit |
||
|
Maciej Wieczor-Retman
|
c00ca876e0 |
kasan: refactor pcpu kasan vmalloc unpoison
commit |
||
Jiayuan Chen
|
69676792c2 |
mm/kasan: fix incorrect unpoisoning in vrealloc for KASAN
commit |
||
Harry Yoo
|
e3253bab3c |
mm: introduce and use {pgd,p4d}_populate_kernel()
commit |
||
Yeoreum Yun
|
464a33c29c |
kunit: kasan_test: disable fortify string checker on kasan_strings() test
commit |
||
|
Yeoreum Yun
|
a7f7d4223f |
kunit: kasan_test: disable fortify string checker on kasan_strings() test
Similar to commit |
||
Marco Elver
|
27e740614d |
kasan: use vmalloc_dump_obj() for vmalloc error reports
commit |
||
|
Yeoreum Yun
|
2d89dab1ea |
kasan: remove kasan_find_vm_area() to prevent possible deadlock
commit |
||
Danilo Krummrich
|
e64a79b9a5 |
rust: treewide: switch to the kernel Vec type
commit
|
||
Miguel Ojeda
|
4e7072490d |
rust: enable clippy::undocumented_unsafe_blocks lint
commit
|
||
Jared Kangas
|
835ca042df |
kasan: make report_lock a raw spinlock
commit |
||
Adrian Huang
|
f9a18889aa |
mm/vmalloc: combine all TLB flush operations of KASAN shadow virtual address into one operation
commit |
||
Andrey Konovalov
|
330d8df81f |
kasan: remove vmalloc_percpu test
Commit |
||
Bibo Mao
|
d2f8671045 |
LoongArch: Set initial pte entry with PAGE_GLOBAL for kernel space
There are two pages in one TLB entry on LoongArch system. For kernel space, it requires both two pte entries (buddies) with PAGE_GLOBAL bit set, otherwise HW treats it as non-global tlb, there will be potential problems if tlb entry for kernel space is not global. Such as fail to flush kernel tlb with the function local_flush_tlb_kernel_range() which supposed only flush tlb with global bit. Kernel address space areas include percpu, vmalloc, vmemmap, fixmap and kasan areas. For these areas both two consecutive page table entries should be enabled with PAGE_GLOBAL bit. So with function set_pte() and pte_clear(), pte buddy entry is checked and set besides its own pte entry. However it is not atomic operation to set both two pte entries, there is problem with test_vmalloc test case. So function kernel_pte_init() is added to init a pte table when it is created for kernel address space, and the default initial pte value is PAGE_GLOBAL rather than zero at beginning. Then only its own pte entry need update with function set_pte() and pte_clear(), nothing to do with the pte buddy entry. Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
Linus Torvalds
|
5701725692 |
Merge tag 'rust-6.12' of https://github.com/Rust-for-Linux/linux
Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Support 'MITIGATION_{RETHUNK,RETPOLINE,SLS}' (which cleans up
objtool warnings), teach objtool about 'noreturn' Rust symbols and
mimic '___ADDRESSABLE()' for 'module_{init,exit}'. With that, we
should be objtool-warning-free, so enable it to run for all Rust
object files.
- KASAN (no 'SW_TAGS'), KCFI and shadow call sanitizer support.
- Support 'RUSTC_VERSION', including re-config and re-build on
change.
- Split helpers file into several files in a folder, to avoid
conflicts in it. Eventually those files will be moved to the right
places with the new build system. In addition, remove the need to
manually export the symbols defined there, reusing existing
machinery for that.
- Relax restriction on configurations with Rust + GCC plugins to just
the RANDSTRUCT plugin.
'kernel' crate:
- New 'list' module: doubly-linked linked list for use with reference
counted values, which is heavily used by the upcoming Rust Binder.
This includes 'ListArc' (a wrapper around 'Arc' that is guaranteed
unique for the given ID), 'AtomicTracker' (tracks whether a
'ListArc' exists using an atomic), 'ListLinks' (the prev/next
pointers for an item in a linked list), 'List' (the linked list
itself), 'Iter' (an iterator over a 'List'), 'Cursor' (a cursor
into a 'List' that allows to remove elements), 'ListArcField' (a
field exclusively owned by a 'ListArc'), as well as support for
heterogeneous lists.
- New 'rbtree' module: red-black tree abstractions used by the
upcoming Rust Binder.
This includes 'RBTree' (the red-black tree itself), 'RBTreeNode' (a
node), 'RBTreeNodeReservation' (a memory reservation for a node),
'Iter' and 'IterMut' (immutable and mutable iterators), 'Cursor'
(bidirectional cursor that allows to remove elements), as well as
an entry API similar to the Rust standard library one.
- 'init' module: add 'write_[pin_]init' methods and the
'InPlaceWrite' trait. Add the 'assert_pinned!' macro.
- 'sync' module: implement the 'InPlaceInit' trait for 'Arc' by
introducing an associated type in the trait.
- 'alloc' module: add 'drop_contents' method to 'BoxExt'.
- 'types' module: implement the 'ForeignOwnable' trait for
'Pin<Box<T>>' and improve the trait's documentation. In addition,
add the 'into_raw' method to the 'ARef' type.
- 'error' module: in preparation for the upcoming Rust support for
32-bit architectures, like arm, locally allow Clippy lint for
those.
Documentation:
- https://rust.docs.kernel.org has been announced, so link to it.
- Enable rustdoc's "jump to definition" feature, making its output a
bit closer to the experience in a cross-referencer.
- Debian Testing now also provides recent Rust releases (outside of
the freeze period), so add it to the list.
MAINTAINERS:
- Trevor is joining as reviewer of the "RUST" entry.
And a few other small bits"
* tag 'rust-6.12' of https://github.com/Rust-for-Linux/linux: (54 commits)
kasan: rust: Add KASAN smoke test via UAF
kbuild: rust: Enable KASAN support
rust: kasan: Rust does not support KHWASAN
kbuild: rust: Define probing macros for rustc
kasan: simplify and clarify Makefile
rust: cfi: add support for CFI_CLANG with Rust
cfi: add CONFIG_CFI_ICALL_NORMALIZE_INTEGERS
rust: support for shadow call stack sanitizer
docs: rust: include other expressions in conditional compilation section
kbuild: rust: replace proc macros dependency on `core.o` with the version text
kbuild: rust: rebuild if the version text changes
kbuild: rust: re-run Kconfig if the version text changes
kbuild: rust: add `CONFIG_RUSTC_VERSION`
rust: avoid `box_uninit_write` feature
MAINTAINERS: add Trevor Gross as Rust reviewer
rust: rbtree: add `RBTree::entry`
rust: rbtree: add cursor
rust: rbtree: add mutable iterator
rust: rbtree: add iterator
rust: rbtree: add red-black tree implementation backed by the C version
...
|
||
Matthew Maurer
|
a2f1154705 |
kasan: rust: Add KASAN smoke test via UAF
Adds a smoke test to ensure that KASAN in Rust is actually detecting a Rust-native UAF. There is significant room to expand this test suite, but this will at least ensure that flags are having the intended effect. The rename from kasan_test.c to kasan_test_c.c is in order to allow the single kasan_test.ko test suite to contain both a .o file produced by the C compiler and one produced by rustc. Signed-off-by: Matthew Maurer <mmaurer@google.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Link: https://lore.kernel.org/r/20240820194910.187826-5-mmaurer@google.com [ Applied empty line nit, removed double empty line, applied `rustfmt` and formatted crate comment. - Miguel ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
Jann Horn
|
b8c8ba73c6 |
slub: Introduce CONFIG_SLUB_RCU_DEBUG
Currently, KASAN is unable to catch use-after-free in SLAB_TYPESAFE_BY_RCU slabs because use-after-free is allowed within the RCU grace period by design. Add a SLUB debugging feature which RCU-delays every individual kmem_cache_free() before either actually freeing the object or handing it off to KASAN, and change KASAN to poison freed objects as normal when this option is enabled. For now I've configured Kconfig.debug to default-enable this feature in the KASAN GENERIC and SW_TAGS modes; I'm not enabling it by default in HW_TAGS mode because I'm not sure if it might have unwanted performance degradation effects there. Note that this is mostly useful with KASAN in the quarantine-based GENERIC mode; SLAB_TYPESAFE_BY_RCU slabs are basically always also slabs with a ->ctor, and KASAN's assign_tag() currently has to assign fixed tags for those, reducing the effectiveness of SW_TAGS/HW_TAGS mode. (A possible future extension of this work would be to also let SLUB call the ->ctor() on every allocation instead of only when the slab page is allocated; then tag-based modes would be able to assign new tags on every reallocation.) Tested-by: syzbot+263726e59eab6b442723@syzkaller.appspotmail.com Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Acked-by: Marco Elver <elver@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> #slab Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> |
||
|
Jann Horn
|
b3c3424575 |
kasan: catch invalid free before SLUB reinitializes the object
Currently, when KASAN is combined with init-on-free behavior, the initialization happens before KASAN's "invalid free" checks. More importantly, a subsequent commit will want to RCU-delay the actual SLUB freeing of an object, and we'd like KASAN to still validate synchronously that freeing the object is permitted. (Otherwise this change will make the existing testcase kmem_cache_invalid_free fail.) So add a new KASAN hook that allows KASAN to pre-validate a kmem_cache_free() operation before SLUB actually starts modifying the object or its metadata. Inside KASAN, this: - moves checks from poison_slab_object() into check_slab_allocation() - moves kasan_arch_is_ready() up into callers of poison_slab_object() - removes "ip" argument of poison_slab_object() and __kasan_slab_free() (since those functions no longer do any reporting) Acked-by: Vlastimil Babka <vbabka@suse.cz> #slub Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> |
||
|
Andrey Konovalov
|
1c61990d37 |
kasan: fix bad call to unpoison_slab_object
Commit |
||
Kent Overstreet
|
0069455bcb |
fix missing vmalloc.h includes
Patch series "Memory allocation profiling", v6.
Overview:
Low overhead [1] per-callsite memory allocation profiling. Not just for
debug kernels, overhead low enough to be deployed in production.
Example output:
root@moria-kvm:~# sort -rn /proc/allocinfo
127664128 31168 mm/page_ext.c:270 func:alloc_page_ext
56373248 4737 mm/slub.c:2259 func:alloc_slab_page
14880768 3633 mm/readahead.c:247 func:page_cache_ra_unbounded
14417920 3520 mm/mm_init.c:2530 func:alloc_large_system_hash
13377536 234 block/blk-mq.c:3421 func:blk_mq_alloc_rqs
11718656 2861 mm/filemap.c:1919 func:__filemap_get_folio
9192960 2800 kernel/fork.c:307 func:alloc_thread_stack_node
4206592 4 net/netfilter/nf_conntrack_core.c:2567 func:nf_ct_alloc_hashtable
4136960 1010 drivers/staging/ctagmod/ctagmod.c:20 [ctagmod] func:ctagmod_start
3940352 962 mm/memory.c:4214 func:alloc_anon_folio
2894464 22613 fs/kernfs/dir.c:615 func:__kernfs_new_node
...
Usage:
kconfig options:
- CONFIG_MEM_ALLOC_PROFILING
- CONFIG_MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT
- CONFIG_MEM_ALLOC_PROFILING_DEBUG
adds warnings for allocations that weren't accounted because of a
missing annotation
sysctl:
/proc/sys/vm/mem_profiling
Runtime info:
/proc/allocinfo
Notes:
[1]: Overhead
To measure the overhead we are comparing the following configurations:
(1) Baseline with CONFIG_MEMCG_KMEM=n
(2) Disabled by default (CONFIG_MEM_ALLOC_PROFILING=y &&
CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=n)
(3) Enabled by default (CONFIG_MEM_ALLOC_PROFILING=y &&
CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=y)
(4) Enabled at runtime (CONFIG_MEM_ALLOC_PROFILING=y &&
CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=n && /proc/sys/vm/mem_profiling=1)
(5) Baseline with CONFIG_MEMCG_KMEM=y && allocating with __GFP_ACCOUNT
(6) Disabled by default (CONFIG_MEM_ALLOC_PROFILING=y &&
CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=n) && CONFIG_MEMCG_KMEM=y
(7) Enabled by default (CONFIG_MEM_ALLOC_PROFILING=y &&
CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=y) && CONFIG_MEMCG_KMEM=y
Performance overhead:
To evaluate performance we implemented an in-kernel test executing
multiple get_free_page/free_page and kmalloc/kfree calls with allocation
sizes growing from 8 to 240 bytes with CPU frequency set to max and CPU
affinity set to a specific CPU to minimize the noise. Below are results
from running the test on Ubuntu 22.04.2 LTS with 6.8.0-rc1 kernel on
56 core Intel Xeon:
kmalloc pgalloc
(1 baseline) 6.764s 16.902s
(2 default disabled) 6.793s (+0.43%) 17.007s (+0.62%)
(3 default enabled) 7.197s (+6.40%) 23.666s (+40.02%)
(4 runtime enabled) 7.405s (+9.48%) 23.901s (+41.41%)
(5 memcg) 13.388s (+97.94%) 48.460s (+186.71%)
(6 def disabled+memcg) 13.332s (+97.10%) 48.105s (+184.61%)
(7 def enabled+memcg) 13.446s (+98.78%) 54.963s (+225.18%)
Memory overhead:
Kernel size:
text data bss dec diff
(1) 26515311 18890222 17018880 62424413
(2) 26524728 19423818 16740352 62688898 264485
(3) 26524724 19423818 16740352 62688894 264481
(4) 26524728 19423818 16740352 62688898 264485
(5) 26541782 18964374 16957440 62463596 39183
Memory consumption on a 56 core Intel CPU with 125GB of memory:
Code tags: 192 kB
PageExts: 262144 kB (256MB)
SlabExts: 9876 kB (9.6MB)
PcpuExts: 512 kB (0.5MB)
Total overhead is 0.2% of total memory.
Benchmarks:
Hackbench tests run 100 times:
hackbench -s 512 -l 200 -g 15 -f 25 -P
baseline disabled profiling enabled profiling
avg 0.3543 0.3559 (+0.0016) 0.3566 (+0.0023)
stdev 0.0137 0.0188 0.0077
hackbench -l 10000
baseline disabled profiling enabled profiling
avg 6.4218 6.4306 (+0.0088) 6.5077 (+0.0859)
stdev 0.0933 0.0286 0.0489
stress-ng tests:
stress-ng --class memory --seq 4 -t 60
stress-ng --class cpu --seq 4 -t 60
Results posted at: https://evilpiepirate.org/~kent/memalloc_prof_v4_stress-ng/
[2] https://lore.kernel.org/all/20240306182440.2003814-1-surenb@google.com/
This patch (of 37):
The next patch drops vmalloc.h from a system header in order to fix a
circular dependency; this adds it to all the files that were pulling it in
implicitly.
[kent.overstreet@linux.dev: fix arch/alpha/lib/memcpy.c]
Link: https://lkml.kernel.org/r/20240327002152.3339937-1-kent.overstreet@linux.dev
[surenb@google.com: fix arch/x86/mm/numa_32.c]
Link: https://lkml.kernel.org/r/20240402180933.1663992-1-surenb@google.com
[kent.overstreet@linux.dev: a few places were depending on sizes.h]
Link: https://lkml.kernel.org/r/20240404034744.1664840-1-kent.overstreet@linux.dev
[arnd@arndb.de: fix mm/kasan/hw_tags.c]
Link: https://lkml.kernel.org/r/20240404124435.3121534-1-arnd@kernel.org
[surenb@google.com: fix arc build]
Link: https://lkml.kernel.org/r/20240405225115.431056-1-surenb@google.com
Link: https://lkml.kernel.org/r/20240321163705.3067592-1-surenb@google.com
Link: https://lkml.kernel.org/r/20240321163705.3067592-2-surenb@google.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Tested-by: Kees Cook <keescook@chromium.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andreas Hindborg <a.hindborg@samsung.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: "Björn Roy Baron" <bjorn3_gh@protonmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Gary Guo <gary@garyguo.net>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wedson Almeida Filho <wedsonaf@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
Linus Torvalds
|
902861e34c |
Merge tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Sumanth Korikkar has taught s390 to allocate hotplug-time page frames
from hotplugged memory rather than only from main memory. Series
"implement "memmap on memory" feature on s390".
- More folio conversions from Matthew Wilcox in the series
"Convert memcontrol charge moving to use folios"
"mm: convert mm counter to take a folio"
- Chengming Zhou has optimized zswap's rbtree locking, providing
significant reductions in system time and modest but measurable
reductions in overall runtimes. The series is "mm/zswap: optimize the
scalability of zswap rb-tree".
- Chengming Zhou has also provided the series "mm/zswap: optimize zswap
lru list" which provides measurable runtime benefits in some
swap-intensive situations.
- And Chengming Zhou further optimizes zswap in the series "mm/zswap:
optimize for dynamic zswap_pools". Measured improvements are modest.
- zswap cleanups and simplifications from Yosry Ahmed in the series
"mm: zswap: simplify zswap_swapoff()".
- In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has
contributed several DAX cleanups as well as adding a sysfs tunable to
control the memmap_on_memory setting when the dax device is
hotplugged as system memory.
- Johannes Weiner has added the large series "mm: zswap: cleanups",
which does that.
- More DAMON work from SeongJae Park in the series
"mm/damon: make DAMON debugfs interface deprecation unignorable"
"selftests/damon: add more tests for core functionalities and corner cases"
"Docs/mm/damon: misc readability improvements"
"mm/damon: let DAMOS feeds and tame/auto-tune itself"
- In the series "mm/mempolicy: weighted interleave mempolicy and sysfs
extension" Rakie Kim has developed a new mempolicy interleaving
policy wherein we allocate memory across nodes in a weighted fashion
rather than uniformly. This is beneficial in heterogeneous memory
environments appearing with CXL.
- Christophe Leroy has contributed some cleanup and consolidation work
against the ARM pagetable dumping code in the series "mm: ptdump:
Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute".
- Luis Chamberlain has added some additional xarray selftesting in the
series "test_xarray: advanced API multi-index tests".
- Muhammad Usama Anjum has reworked the selftest code to make its
human-readable output conform to the TAP ("Test Anything Protocol")
format. Amongst other things, this opens up the use of third-party
tools to parse and process out selftesting results.
- Ryan Roberts has added fork()-time PTE batching of THP ptes in the
series "mm/memory: optimize fork() with PTE-mapped THP". Mainly
targeted at arm64, this significantly speeds up fork() when the
process has a large number of pte-mapped folios.
- David Hildenbrand also gets in on the THP pte batching game in his
series "mm/memory: optimize unmap/zap with PTE-mapped THP". It
implements batching during munmap() and other pte teardown
situations. The microbenchmark improvements are nice.
- And in the series "Transparent Contiguous PTEs for User Mappings"
Ryan Roberts further utilizes arm's pte's contiguous bit ("contpte
mappings"). Kernel build times on arm64 improved nicely. Ryan's
series "Address some contpte nits" provides some followup work.
- In the series "mm/hugetlb: Restore the reservation" Breno Leitao has
fixed an obscure hugetlb race which was causing unnecessary page
faults. He has also added a reproducer under the selftest code.
- In the series "selftests/mm: Output cleanups for the compaction
test", Mark Brown did what the title claims.
- Kinsey Ho has added the series "mm/mglru: code cleanup and
refactoring".
- Even more zswap material from Nhat Pham. The series "fix and extend
zswap kselftests" does as claimed.
- In the series "Introduce cpu_dcache_is_aliasing() to fix DAX
regression" Mathieu Desnoyers has cleaned up and fixed rather a mess
in our handling of DAX on archiecctures which have virtually aliasing
data caches. The arm architecture is the main beneficiary.
- Lokesh Gidra's series "per-vma locks in userfaultfd" provides
dramatic improvements in worst-case mmap_lock hold times during
certain userfaultfd operations.
- Some page_owner enhancements and maintenance work from Oscar Salvador
in his series
"page_owner: print stacks and their outstanding allocations"
"page_owner: Fixup and cleanup"
- Uladzislau Rezki has contributed some vmalloc scalability
improvements in his series "Mitigate a vmap lock contention". It
realizes a 12x improvement for a certain microbenchmark.
- Some kexec/crash cleanup work from Baoquan He in the series "Split
crash out from kexec and clean up related config items".
- Some zsmalloc maintenance work from Chengming Zhou in the series
"mm/zsmalloc: fix and optimize objects/page migration"
"mm/zsmalloc: some cleanup for get/set_zspage_mapping()"
- Zi Yan has taught the MM to perform compaction on folios larger than
order=0. This a step along the path to implementaton of the merging
of large anonymous folios. The series is named "Enable >0 order folio
memory compaction".
- Christoph Hellwig has done quite a lot of cleanup work in the
pagecache writeback code in his series "convert write_cache_pages()
to an iterator".
- Some modest hugetlb cleanups and speedups in Vishal Moola's series
"Handle hugetlb faults under the VMA lock".
- Zi Yan has changed the page splitting code so we can split huge pages
into sizes other than order-0 to better utilize large folios. The
series is named "Split a folio to any lower order folios".
- David Hildenbrand has contributed the series "mm: remove
total_mapcount()", a cleanup.
- Matthew Wilcox has sought to improve the performance of bulk memory
freeing in his series "Rearrange batched folio freeing".
- Gang Li's series "hugetlb: parallelize hugetlb page init on boot"
provides large improvements in bootup times on large machines which
are configured to use large numbers of hugetlb pages.
- Matthew Wilcox's series "PageFlags cleanups" does that.
- Qi Zheng's series "minor fixes and supplement for ptdesc" does that
also. S390 is affected.
- Cleanups to our pagemap utility functions from Peter Xu in his series
"mm/treewide: Replace pXd_large() with pXd_leaf()".
- Nico Pache has fixed a few things with our hugepage selftests in his
series "selftests/mm: Improve Hugepage Test Handling in MM
Selftests".
- Also, of course, many singleton patches to many things. Please see
the individual changelogs for details.
* tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (435 commits)
mm/zswap: remove the memcpy if acomp is not sleepable
crypto: introduce: acomp_is_async to expose if comp drivers might sleep
memtest: use {READ,WRITE}_ONCE in memory scanning
mm: prohibit the last subpage from reusing the entire large folio
mm: recover pud_leaf() definitions in nopmd case
selftests/mm: skip the hugetlb-madvise tests on unmet hugepage requirements
selftests/mm: skip uffd hugetlb tests with insufficient hugepages
selftests/mm: dont fail testsuite due to a lack of hugepages
mm/huge_memory: skip invalid debugfs new_order input for folio split
mm/huge_memory: check new folio order when split a folio
mm, vmscan: retry kswapd's priority loop with cache_trim_mode off on failure
mm: add an explicit smp_wmb() to UFFDIO_CONTINUE
mm: fix list corruption in put_pages_list
mm: remove folio from deferred split list before uncharging it
filemap: avoid unnecessary major faults in filemap_fault()
mm,page_owner: drop unnecessary check
mm,page_owner: check for null stack_record before bumping its refcount
mm: swap: fix race between free_swap_and_cache() and swapoff()
mm/treewide: align up pXd_leaf() retval across archs
mm/treewide: drop pXd_large()
...
|
||
|
Linus Torvalds
|
0ea680eda6 |
Merge tag 'slab-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka: - Freelist loading optimization (Chengming Zhou) When the per-cpu slab is depleted and a new one loaded from the cpu partial list, optimize the loading to avoid an irq enable/disable cycle. This results in a 3.5% performance improvement on the "perf bench sched messaging" test. - Kernel boot parameters cleanup after SLAB removal (Xiongwei Song) Due to two different main slab implementations we've had boot parameters prefixed either slab_ and slub_ with some later becoming an alias as both implementations gained the same functionality (i.e. slab_nomerge vs slub_nomerge). In order to eventually get rid of the implementation-specific names, the canonical and documented parameters are now all prefixed slab_ and the slub_ variants become deprecated but still working aliases. - SLAB_ kmem_cache creation flags cleanup (Vlastimil Babka) The flags had hardcoded #define values which became tedious and error-prone when adding new ones. Assign the values via an enum that takes care of providing unique bit numbers. Also deprecate SLAB_MEM_SPREAD which was only used by SLAB, so it's a no-op since SLAB removal. Assign it an explicit zero value. The removals of the flag usage are handled independently in the respective subsystems, with a final removal of any leftover usage planned for the next release. - Misc cleanups and fixes (Chengming Zhou, Xiaolei Wang, Zheng Yejian) Includes removal of unused code or function parameters and a fix of a memleak. * tag 'slab-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: slab: remove PARTIAL_NODE slab_state mm, slab: remove memcg_from_slab_obj() mm, slab: remove the corner case of inc_slabs_node() mm/slab: Fix a kmemleak in kmem_cache_destroy() mm, slab, kasan: replace kasan_never_merge() with SLAB_NO_MERGE mm, slab: use an enum to define SLAB_ cache creation flags mm, slab: deprecate SLAB_MEM_SPREAD flag mm, slab: fix the comment of cpu partial list mm, slab: remove unused object_size parameter in kmem_cache_flags() mm/slub: remove parameter 'flags' in create_kmalloc_caches() mm/slub: remove unused parameter in next_freelist_entry() mm/slub: remove full list manipulation for non-debug slab mm/slub: directly load freelist from cpu partial slab in the likely case mm/slub: make the description of slab_min_objects helpful in doc mm/slub: replace slub_$params with slab_$params in slub.rst mm/slub: unify all sl[au]b parameters with "slab_$param" Documentation: kernel-parameters: remove noaliencache |
||
Peter Xu
|
b6c9d5a93b |
mm/kasan: use pXd_leaf() in shadow_mapped()
There is an old trick in shadow_mapped() to use pXd_bad() to detect huge
pages. After commit
|
||
Paul Heidekrüger
|
8cc92a6793 |
kasan: fix a2 allocation and remove explicit cast in atomic tests
Address the additional feedback since |
||
Vlastimil Babka
|
96d8dbb6f6 |
mm, slab, kasan: replace kasan_never_merge() with SLAB_NO_MERGE
The SLAB_KASAN flag prevents merging of caches in some configurations, which is handled in a rather complicated way via kasan_never_merge(). Since we now have a generic SLAB_NO_MERGE flag, we can instead use it for KASAN caches in addition to SLAB_KASAN in those configurations, and simplify the SLAB_NEVER_MERGE handling. Tested-by: Xiongwei Song <xiongwei.song@windriver.com> Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Tested-by: David Rientjes <rientjes@google.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> |
||
Andrew Morton
|
1f1183c4c0 | merge mm-hotfixes-stable into mm-nonmm-stable to pick up stackdepot changes | ||
|
Marco Elver
|
711d349174 |
kasan: revert eviction of stack traces in generic mode
This partially reverts commits |
||
Juntong Deng
|
952237b5a9 |
kasan: increase the number of bits to shift when recording extra timestamps
In |
||
Arnd Bergmann
|
e10aea105e |
kasan/test: avoid gcc warning for intentional overflow
The out-of-bounds test allocates an object that is three bytes too short
in order to validate the bounds checking. Starting with gcc-14, this
causes a compile-time warning as gcc has grown smart enough to understand
the sizeof() logic:
mm/kasan/kasan_test.c: In function 'kmalloc_oob_16':
mm/kasan/kasan_test.c:443:14: error: allocation of insufficient size '13' for type 'struct <anonymous>' with size '16' [-Werror=alloc-size]
443 | ptr1 = kmalloc(sizeof(*ptr1) - 3, GFP_KERNEL);
| ^
Hide the actual computation behind a RELOC_HIDE() that ensures
the compiler misses the intentional bug.
Link: https://lkml.kernel.org/r/20240212111609.869266-1-arnd@kernel.org
Fixes:
|
||
Tiezhu Yang
|
be142b8080 |
kasan: rename test_kasan_module_init to kasan_test_module_init
After commit
|
||
|
Paul Heidekrüger
|
4e76c8cc33 |
kasan: add atomic tests
Test that KASan can detect some unsafe atomic accesses. As discussed in the linked thread below, these tests attempt to cover the most common uses of atomics and, therefore, aren't exhaustive. Link: https://lkml.kernel.org/r/20240202113259.3045705-1-paul.heidekrueger@tum.de Link: https://lore.kernel.org/all/20240131210041.686657-1-paul.heidekrueger@tum.de/T/#u Signed-off-by: Paul Heidekrüger <paul.heidekrueger@tum.de> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=214055 Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: Marco Elver <elver@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Benjamin Gray
|
2597c9947b |
kasan: guard release_free_meta() shadow access with kasan_arch_is_ready()
release_free_meta() accesses the shadow directly through the path
kasan_slab_free
__kasan_slab_free
kasan_release_object_meta
release_free_meta
kasan_mem_to_shadow
There are no kasan_arch_is_ready() guards here, allowing an oops when the
shadow is not initialized. The oops can be seen on a Power8 KVM guest.
This patch adds the guard to release_free_meta(), as it's the first level
that specifically requires the shadow.
It is safe to put the guard at the start of this function, before the
stack put: only kasan_save_free_info() can initialize the saved stack,
which itself is guarded with kasan_arch_is_ready() by its caller
poison_slab_object(). If the arch becomes ready before
release_free_meta() then we will not observe KASAN_SLAB_FREE_META in the
object's shadow, so we will not put an uninitialized stack either.
Link: https://lkml.kernel.org/r/20240213033958.139383-1-bgray@linux.ibm.com
Fixes:
|
||
|
Andrey Konovalov
|
cc478e0b6b |
kasan: avoid resetting aux_lock
With commit |
||
|
Linus Torvalds
|
fb46e22a9e |
Merge tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Peng Zhang has done some mapletree maintainance work in the series
'maple_tree: add mt_free_one() and mt_attr() helpers'
'Some cleanups of maple tree'
- In the series 'mm: use memmap_on_memory semantics for dax/kmem'
Vishal Verma has altered the interworking between memory-hotplug
and dax/kmem so that newly added 'device memory' can more easily
have its memmap placed within that newly added memory.
- Matthew Wilcox continues folio-related work (including a few fixes)
in the patch series
'Add folio_zero_tail() and folio_fill_tail()'
'Make folio_start_writeback return void'
'Fix fault handler's handling of poisoned tail pages'
'Convert aops->error_remove_page to ->error_remove_folio'
'Finish two folio conversions'
'More swap folio conversions'
- Kefeng Wang has also contributed folio-related work in the series
'mm: cleanup and use more folio in page fault'
- Jim Cromie has improved the kmemleak reporting output in the series
'tweak kmemleak report format'.
- In the series 'stackdepot: allow evicting stack traces' Andrey
Konovalov to permits clients (in this case KASAN) to cause eviction
of no longer needed stack traces.
- Charan Teja Kalla has fixed some accounting issues in the page
allocator's atomic reserve calculations in the series 'mm:
page_alloc: fixes for high atomic reserve caluculations'.
- Dmitry Rokosov has added to the samples/ dorectory some sample code
for a userspace memcg event listener application. See the series
'samples: introduce cgroup events listeners'.
- Some mapletree maintanance work from Liam Howlett in the series
'maple_tree: iterator state changes'.
- Nhat Pham has improved zswap's approach to writeback in the series
'workload-specific and memory pressure-driven zswap writeback'.
- DAMON/DAMOS feature and maintenance work from SeongJae Park in the
series
'mm/damon: let users feed and tame/auto-tune DAMOS'
'selftests/damon: add Python-written DAMON functionality tests'
'mm/damon: misc updates for 6.8'
- Yosry Ahmed has improved memcg's stats flushing in the series 'mm:
memcg: subtree stats flushing and thresholds'.
- In the series 'Multi-size THP for anonymous memory' Ryan Roberts
has added a runtime opt-in feature to transparent hugepages which
improves performance by allocating larger chunks of memory during
anonymous page faults.
- Matthew Wilcox has also contributed some cleanup and maintenance
work against eh buffer_head code int he series 'More buffer_head
cleanups'.
- Suren Baghdasaryan has done work on Andrea Arcangeli's series
'userfaultfd move option'. UFFDIO_MOVE permits userspace heap
compaction algorithms to move userspace's pages around rather than
UFFDIO_COPY'a alloc/copy/free.
- Stefan Roesch has developed a 'KSM Advisor', in the series 'mm/ksm:
Add ksm advisor'. This is a governor which tunes KSM's scanning
aggressiveness in response to userspace's current needs.
- Chengming Zhou has optimized zswap's temporary working memory use
in the series 'mm/zswap: dstmem reuse optimizations and cleanups'.
- Matthew Wilcox has performed some maintenance work on the writeback
code, both code and within filesystems. The series is 'Clean up the
writeback paths'.
- Andrey Konovalov has optimized KASAN's handling of alloc and free
stack traces for secondary-level allocators, in the series 'kasan:
save mempool stack traces'.
- Andrey also performed some KASAN maintenance work in the series
'kasan: assorted clean-ups'.
- David Hildenbrand has gone to town on the rmap code. Cleanups, more
pte batching, folio conversions and more. See the series 'mm/rmap:
interface overhaul'.
- Kinsey Ho has contributed some maintenance work on the MGLRU code
in the series 'mm/mglru: Kconfig cleanup'.
- Matthew Wilcox has contributed lruvec page accounting code cleanups
in the series 'Remove some lruvec page accounting functions'"
* tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (361 commits)
mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDER
mm, treewide: introduce NR_PAGE_ORDERS
selftests/mm: add separate UFFDIO_MOVE test for PMD splitting
selftests/mm: skip test if application doesn't has root privileges
selftests/mm: conform test to TAP format output
selftests: mm: hugepage-mmap: conform to TAP format output
selftests/mm: gup_test: conform test to TAP format output
mm/selftests: hugepage-mremap: conform test to TAP format output
mm/vmstat: move pgdemote_* out of CONFIG_NUMA_BALANCING
mm: zsmalloc: return -ENOSPC rather than -EINVAL in zs_malloc while size is too large
mm/memcontrol: remove __mod_lruvec_page_state()
mm/khugepaged: use a folio more in collapse_file()
slub: use a folio in __kmalloc_large_node
slub: use folio APIs in free_large_kmalloc()
slub: use alloc_pages_node() in alloc_slab_page()
mm: remove inc/dec lruvec page state functions
mm: ratelimit stat flush from workingset shrinker
kasan: stop leaking stack trace handles
mm/mglru: remove CONFIG_TRANSPARENT_HUGEPAGE
mm/mglru: add dummy pmd_dirty()
...
|
||
|
Linus Torvalds
|
d30e51aa7b |
Merge tag 'slab-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- SLUB: delayed freezing of CPU partial slabs (Chengming Zhou)
Freezing is an operation involving double_cmpxchg() that makes a slab
exclusive for a particular CPU. Chengming noticed that we use it also
in situations where we are not yet installing the slab as the CPU
slab, because freezing also indicates that the slab is not on the
shared list. This results in redundant freeze/unfreeze operation and
can be avoided by marking separately the shared list presence by
reusing the PG_workingset flag.
This approach neatly avoids the issues described in
|
||
Andrey Konovalov
|
63b85ac56a |
kasan: stop leaking stack trace handles
Commit |
||
|
Andrey Konovalov
|
a3fbe303ec |
kasan: simplify kasan_complete_mode_report_info for tag-based modes
memcpy the alloc/free tracks when collecting the information about a bad
access instead of copying fields one by one.
Link: https://lkml.kernel.org/r/20231221183540.168428-4-andrey.konovalov@linux.dev
Fixes:
|
||
|
Andrey Konovalov
|
fd4064f697 |
kasan: simplify saving extra info into tracks
Avoid duplicating code for saving extra info into tracks: reuse the common
function for this.
Link: https://lkml.kernel.org/r/20231221183540.168428-3-andrey.konovalov@linux.dev
Fixes:
|
||
|
Andrey Konovalov
|
04afc540e5 |
kasan: reuse kasan_track in kasan_stack_ring_entry
Avoid duplicating fields of kasan_track in kasan_stack_ring_entry: reuse
the structure.
Link: https://lkml.kernel.org/r/20231221183540.168428-2-andrey.konovalov@linux.dev
Fixes:
|
||
|
Andrey Konovalov
|
f6940e8adc |
kasan: clean up kasan_cache_create
Reorganize the code to avoid nested if/else checks to improve the
readability.
Also drop the confusing comments about KMALLOC_MAX_SIZE checks: they are
relevant for both SLUB and SLAB (originally, the comments likely confused
KMALLOC_MAX_SIZE with KMALLOC_MAX_CACHE_SIZE).
Link: https://lkml.kernel.org/r/20231221183540.168428-1-andrey.konovalov@linux.dev
Fixes:
|
||
|
Andrey Konovalov
|
4e397274e1 |
kasan: speed up match_all_mem_tag test for SW_TAGS
Checking all 256 possible tag values in the match_all_mem_tag KASAN test is slow and produces 256 reports. Instead, just check the first 8 and the last 8. Link: https://lkml.kernel.org/r/6fe51262defd80cdc1150c42404977aafd1b6167.1703188911.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Andrey Konovalov
|
3ab9304db6 |
kasan: remove SLUB checks for page_alloc fallbacks in tests
A number of KASAN tests rely on the fact that calling kmalloc with a size
larger than an order-1 page falls back onto page_alloc.
This fallback was originally only implemented for SLUB, but since commit
|
||
|
Andrey Konovalov
|
f2fffc0cfc |
kasan: export kasan_poison as GPL
KASAN uses EXPORT_SYMBOL_GPL for symbols whose exporting is only required for KASAN tests when they are built as a module. kasan_poison is one on those symbols, so export it as GPL. Link: https://lkml.kernel.org/r/171d0b8b2e807d04cca74f973830f9b169e06fb8.1703188911.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Andrey Konovalov
|
14c99b990c |
kasan: check kasan_vmalloc_enabled in vmalloc tests
Check that vmalloc poisoning is not disabled via command line when running the vmalloc-related KASAN tests. Skip the tests otherwise. Link: https://lkml.kernel.org/r/954456e50ac98519910c3e24a479a18eae62f8dd.1703188911.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Andrey Konovalov
|
58ee788cb2 |
kasan: respect CONFIG_KASAN_VMALLOC for kasan_flag_vmalloc
Never enable the kasan_flag_vmalloc static branch unless CONFIG_KASAN_VMALLOC is enabled. This does not fix any observable bugs (vmalloc annotations for the HW_TAGS mode are no-op with CONFIG_KASAN_VMALLOC disabled) but rather just cleans up the code. Link: https://lkml.kernel.org/r/3e5c933c8f6b59bd587efb05c407964be951772c.1703188911.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Andrey Konovalov
|
99f3fe416c |
kasan: clean up is_kfence_address checks
1. Do not untag addresses that are passed to is_kfence_address: it tolerates tagged addresses. 2. Move is_kfence_address checks from internal KASAN functions (kasan_poison/unpoison, etc.) to external-facing ones. Note that kasan_poison/unpoison are never called outside of KASAN/slab code anymore; the comment is wrong, so drop it. 3. Simplify/reorganize the code around the updated checks. Link: https://lkml.kernel.org/r/1065732315ef4e141b6177d8f612232d4d5bc0ab.1703188911.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Andrey Konovalov
|
1a55836a1b |
kasan: update kasan_poison documentation comment
The comment for kasan_poison says that the size argument gets aligned by the function to KASAN_GRANULE_SIZE, which is wrong: the argument must be already aligned when it is passed to the function. Remove the invalid part of the comment. Link: https://lkml.kernel.org/r/992a302542059fc40d86ea560eac413ecb31b6a1.1703188911.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Andrey Konovalov
|
3067b919ed |
kasan: clean up kasan_requires_meta
Currently, for Generic KASAN mode, kasan_requires_meta is defined to return kasan_stack_collection_enabled. Even though the Generic mode does not support disabling stack trace collection, kasan_requires_meta was implemented in this way to make it easier to implement the disabling for the Generic mode in the future. However, for the Generic mode, the per-object metadata also stores the quarantine link. So even if disabling stack collection is implemented, the per-object metadata will still be required. Fix kasan_requires_meta to return true for the Generic mode and update the related comments. This change does not fix any observable bugs but rather just brings the code to a cleaner state. Link: https://lkml.kernel.org/r/8086623407095ac1c82377a2107dcc5845f99cfa.1703188911.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Andrey Konovalov
|
c20e3feadd |
kasan: improve kasan_non_canonical_hook
Make kasan_non_canonical_hook to be more sure in its report (i.e. say "probably" instead of "maybe") if the address belongs to the shadow memory region for kernel addresses. Also use the kasan_shadow_to_mem helper to calculate the original address. Also improve the comments in kasan_non_canonical_hook. Link: https://lkml.kernel.org/r/af94ef3cb26f8c065048b3158d9f20f6102bfaaa.1703188911.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |