[ Upstream commit 70274765fe ]
MPTCP initialize the receive buffer stamp in mptcp_rcv_space_init(),
using the provided subflow stamp. Such helper is invoked in several
places; for passive sockets, space init happened at clone time.
In such scenario, MPTCP ends-up accesses the subflow stamp before
its initialization, leading to quite randomic timing for the first
receive buffer auto-tune event, as the timestamp for newly created
subflow is not refreshed there.
Fix the issue moving the stamp initialization out of the mentioned helper,
at the data transfer start, and always using a fresh timestamp.
Fixes: 013e3179db ("mptcp: fix rcv space initialization")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260203-net-next-mptcp-misc-feat-6-20-v1-2-31ec8bfc56d1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 280d654324 ]
In case of subflow disconnect(), which can also happen with the first
subflow in case of errors like timeout or reset, mptcp_subflow_ctx_reset
will reset most fields from the mptcp_subflow_context structure,
including close_event_done. Then, when another subflow is closed, yet
another SUB_CLOSED event for the disconnected initial subflow is sent.
Because of the previous reset, there are no source address and
destination port.
A solution is then to also check the subflow's local id: it shouldn't be
negative anyway.
Another solution would be not to reset subflow->close_event_done at
disconnect time, but when reused. But then, probably the whole reset
could be done when being reused. Let's not change this logic, similar
to TCP with tcp_disconnect().
Fixes: d82809b6c5 ("mptcp: avoid duplicated SUB_CLOSED events")
Cc: stable@vger.kernel.org
Reported-by: Marco Angaroni <marco.angaroni@italtel.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/603
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260127-net-mptcp-dup-nl-events-v1-1-7f71e1bc4feb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dccf46179d upstream.
Some subflow socket errors need to be reported to the MPTCP socket: the
initial subflow connect (MP_CAPABLE), and the ones from the fallback
sockets. The others are not propagated.
The issue is that sock_error() was used to retrieve the error, which was
also resetting the sk_err field. Because of that, when notifying the
userspace about subflow close events later on from the MPTCP worker, the
ssk->sk_err field was always 0.
Now, the error (sk_err) is only reset when propagating it to the msk.
Fixes: 15cc104533 ("mptcp: deliver ssk errors to msk")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260127-net-mptcp-dup-nl-events-v1-3-7f71e1bc4feb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 71154bbe49 ]
Syzkaller reports a simult-connect race leading to inconsistent fallback
status:
WARNING: CPU: 3 PID: 33 at net/mptcp/subflow.c:1515 subflow_data_ready+0x40b/0x7c0 net/mptcp/subflow.c:1515
Modules linked in:
CPU: 3 UID: 0 PID: 33 Comm: ksoftirqd/3 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:subflow_data_ready+0x40b/0x7c0 net/mptcp/subflow.c:1515
Code: 89 ee e8 78 61 3c f6 40 84 ed 75 21 e8 8e 66 3c f6 44 89 fe bf 07 00 00 00 e8 c1 61 3c f6 41 83 ff 07 74 09 e8 76 66 3c f6 90 <0f> 0b 90 e8 6d 66 3c f6 48 89 df e8 e5 ad ff ff 31 ff 89 c5 89 c6
RSP: 0018:ffffc900006cf338 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff888031acd100 RCX: ffffffff8b7f2abf
RDX: ffff88801e6ea440 RSI: ffffffff8b7f2aca RDI: 0000000000000005
RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000007
R10: 0000000000000004 R11: 0000000000002c10 R12: ffff88802ba69900
R13: 1ffff920000d9e67 R14: ffff888046f81800 R15: 0000000000000004
FS: 0000000000000000(0000) GS:ffff8880d69bc000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000560fc0ca1670 CR3: 0000000032c3a000 CR4: 0000000000352ef0
Call Trace:
<TASK>
tcp_data_queue+0x13b0/0x4f90 net/ipv4/tcp_input.c:5197
tcp_rcv_state_process+0xfdf/0x4ec0 net/ipv4/tcp_input.c:6922
tcp_v6_do_rcv+0x492/0x1740 net/ipv6/tcp_ipv6.c:1672
tcp_v6_rcv+0x2976/0x41e0 net/ipv6/tcp_ipv6.c:1918
ip6_protocol_deliver_rcu+0x188/0x1520 net/ipv6/ip6_input.c:438
ip6_input_finish+0x1e4/0x4b0 net/ipv6/ip6_input.c:489
NF_HOOK include/linux/netfilter.h:318 [inline]
NF_HOOK include/linux/netfilter.h:312 [inline]
ip6_input+0x105/0x2f0 net/ipv6/ip6_input.c:500
dst_input include/net/dst.h:471 [inline]
ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline]
NF_HOOK include/linux/netfilter.h:318 [inline]
NF_HOOK include/linux/netfilter.h:312 [inline]
ipv6_rcv+0x264/0x650 net/ipv6/ip6_input.c:311
__netif_receive_skb_one_core+0x12d/0x1e0 net/core/dev.c:5979
__netif_receive_skb+0x1d/0x160 net/core/dev.c:6092
process_backlog+0x442/0x15e0 net/core/dev.c:6444
__napi_poll.constprop.0+0xba/0x550 net/core/dev.c:7494
napi_poll net/core/dev.c:7557 [inline]
net_rx_action+0xa9f/0xfe0 net/core/dev.c:7684
handle_softirqs+0x216/0x8e0 kernel/softirq.c:579
run_ksoftirqd kernel/softirq.c:968 [inline]
run_ksoftirqd+0x3a/0x60 kernel/softirq.c:960
smpboot_thread_fn+0x3f7/0xae0 kernel/smpboot.c:160
kthread+0x3c2/0x780 kernel/kthread.c:463
ret_from_fork+0x5d7/0x6f0 arch/x86/kernel/process.c:148
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
The TCP subflow can process the simult-connect syn-ack packet after
transitioning to TCP_FIN1 state, bypassing the MPTCP fallback check,
as the sk_state_change() callback is not invoked for * -> FIN_WAIT1
transitions.
That will move the msk socket to an inconsistent status and the next
incoming data will hit the reported splat.
Close the race moving the simult-fallback check at the earliest possible
stage - that is at syn-ack generation time.
About the fixes tags: [2] was supposed to also fix this issue introduced
by [3]. [1] is required as a dependence: it was not explicitly marked as
a fix, but it is one and it has already been backported before [3]. In
other words, this commit should be backported up to [3], including [2]
and [1] if that's not already there.
Fixes: 23e89e8ee7 ("tcp: Don't drop SYN+ACK for simultaneous connect().") [1]
Fixes: 4fd19a3070 ("mptcp: fix inconsistent state on fastopen race") [2]
Fixes: 1e777f39b4 ("mptcp: add MSG_FASTOPEN sendmsg flag support") [3]
Cc: stable@vger.kernel.org
Reported-by: syzbot+0ff6b771b4f7a5bce83b@syzkaller.appspotmail.com
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/586
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251212-net-mptcp-subflow_data_ready-warn-v1-1-d1f9fd1c36c8@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
[ adapted mptcp_try_fallback() call ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0ace3297a7 ]
Before this patch, the kernel was saving any flags set by the userspace,
even unknown ones. This doesn't cause critical issues because the kernel
is only looking at specific ones. But on the other hand, endpoints dumps
could tell the userspace some recent flags seem to be supported on older
kernel versions.
Instead, ignore all unknown flags when parsing them. By doing that, the
userspace can continue to set unsupported flags, but it has a way to
verify what is supported by the kernel.
Note that it sounds better to continue accepting unsupported flags not
to change the behaviour, but also that eases things on the userspace
side by adding "optional" endpoint types only supported by newer kernel
versions without having to deal with the different kernel versions.
A note for the backports: there will be conflicts in mptcp.h on older
versions not having the mentioned flags, the new line should still be
added last, and the '5' needs to be adapted to have the same value as
the last entry.
Fixes: 01cacb00b3 ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251205-net-mptcp-misc-fixes-6-19-rc1-v1-1-9e4781a6c1b8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ GENMASK(5, 0) => GENMASK(4, 0) + context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fff0c87996 upstream.
With the current fastclose implementation, the mptcp_do_fastclose()
helper is in charge of two distinct actions: send the fastclose reset
and cleanup the subflows.
Formally decouple the two steps, ensuring that mptcp explicitly closes
all the subflows after the mentioned helper.
This will make the upcoming fix simpler, and allows dropping the 2nd
argument from mptcp_destroy_common(). The Fixes tag is then the same as
in the next commit to help with the backports.
Fixes: d21f834855 ("mptcp: use fastclose on more edge scenarios")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-5-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4f102d747c upstream.
The rcv window is shared among all the subflows. Currently, MPTCP sync
the TCP-level rcv window with the MPTCP one at tcp_transmit_skb() time.
The above means that incoming data may sporadically observe outdated
TCP-level rcv window and being wrongly dropped by TCP.
Address the issue checking for the edge condition before queuing the
data at TCP level, and eventually syncing the rcv window as needed.
Note that the issue is actually present from the very first MPTCP
implementation, but backports older than the blamed commit below will
range from impossible to useless.
Before:
$ nstat -n; sleep 1; nstat -z TcpExtBeyondWindow
TcpExtBeyondWindow 14 0.0
After:
$ nstat -n; sleep 1; nstat -z TcpExtBeyondWindow
TcpExtBeyondWindow 0 0.0
Fixes: fa3fe2b150 ("mptcp: track window announced to peer")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-2-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 17393fa7b7 upstream.
I'm observing very frequent self-tests failures in case of fallback when
running on a CONFIG_PREEMPT kernel.
The root cause is that subflow_sched_work_if_closed() closes any subflow
as soon as it is half-closed and has no incoming data pending.
That works well for regular subflows - MPTCP needs bi-directional
connectivity to operate on a given subflow - but for fallback socket is
race prone.
When TCP peer closes the connection before the MPTCP one,
subflow_sched_work_if_closed() will schedule the MPTCP worker to
gracefully close the subflow, and shortly after will do another schedule
to inject and process a dummy incoming DATA_FIN.
On CONFIG_PREEMPT kernel, the MPTCP worker can kick-in and close the
fallback subflow before subflow_sched_work_if_closed() is able to create
the dummy DATA_FIN, unexpectedly interrupting the transfer.
Address the issue explicitly avoiding closing fallback subflows on when
the peer is only half-closed.
Note that, when the subflow is able to create the DATA_FIN before the
worker invocation, the worker will change the msk state before trying to
close the subflow and will skip the latter operation as the msk will not
match anymore the precondition in __mptcp_close_subflow().
Fixes: f09b0ad55a ("mptcp: close subflow when receiving TCP+FIN")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-3-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ae15506024 upstream.
The CI reports sporadic failures of the fastclose self-tests. The root
cause is a duplicate reset, not carrying the relevant MPTCP option.
In the failing scenario the bad reset is received by the peer before
the fastclose one, preventing the reception of the latter.
Indeed there is window of opportunity at fastclose time for the
following race:
mptcp_do_fastclose
__mptcp_close_ssk
__tcp_close()
tcp_set_state() [1]
tcp_send_active_reset() [2]
After [1] the stack will send reset to in-flight data reaching the now
closed port. Such reset may race with [2].
Address the issue explicitly sending a single reset on fastclose before
explicitly moving the subflow to close status.
Fixes: d21f834855 ("mptcp: use fastclose on more edge scenarios")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/596
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-6-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5e15395f6d upstream.
mptcp_cleanup_rbuf() needs to know the last most recent, mptcp-level
rcv_wnd sent, and such information is tracked into the msk->old_wspace
field, updated at ack transmission time by mptcp_write_options().
Fallback socket do not add any mptcp options, such helper is never
invoked, and msk->old_wspace value remain stale. That in turn makes
ack generation at recvmsg() time quite random.
Address the issue ensuring mptcp_write_options() is invoked even for
fallback sockets, and just update the needed info in such a case.
The issue went unnoticed for a long time, as mptcp currently overshots
the fallback socket receive buffer autotune significantly. It is going
to change in the near future.
Fixes: e3859603ba ("mptcp: better msk receive window updates")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/594
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-1-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 035bca3f01 upstream.
syzbot reported use-after-free in mptcp_schedule_work() [1]
Issue here is that mptcp_schedule_work() schedules a work,
then gets a refcount on sk->sk_refcnt if the work was scheduled.
This refcount will be released by mptcp_worker().
[A] if (schedule_work(...)) {
[B] sock_hold(sk);
return true;
}
Problem is that mptcp_worker() can run immediately and complete before [B]
We need instead :
sock_hold(sk);
if (schedule_work(...))
return true;
sock_put(sk);
[1]
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 1 PID: 29 at lib/refcount.c:25 refcount_warn_saturate+0xfa/0x1d0 lib/refcount.c:25
Call Trace:
<TASK>
__refcount_add include/linux/refcount.h:-1 [inline]
__refcount_inc include/linux/refcount.h:366 [inline]
refcount_inc include/linux/refcount.h:383 [inline]
sock_hold include/net/sock.h:816 [inline]
mptcp_schedule_work+0x164/0x1a0 net/mptcp/protocol.c:943
mptcp_tout_timer+0x21/0xa0 net/mptcp/protocol.c:2316
call_timer_fn+0x17e/0x5f0 kernel/time/timer.c:1747
expire_timers kernel/time/timer.c:1798 [inline]
__run_timers kernel/time/timer.c:2372 [inline]
__run_timer_base+0x648/0x970 kernel/time/timer.c:2384
run_timer_base kernel/time/timer.c:2393 [inline]
run_timer_softirq+0xb7/0x180 kernel/time/timer.c:2403
handle_softirqs+0x22f/0x710 kernel/softirq.c:622
__do_softirq kernel/softirq.c:656 [inline]
run_ktimerd+0xcf/0x190 kernel/softirq.c:1138
smpboot_thread_fn+0x542/0xa60 kernel/smpboot.c:160
kthread+0x711/0x8a0 kernel/kthread.c:463
ret_from_fork+0x4bc/0x870 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
Cc: stable@vger.kernel.org
Fixes: 3b1d6210a9 ("mptcp: implement and use MPTCP-level retransmission")
Reported-by: syzbot+355158e7e301548a1424@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6915b46f.050a0220.3565dc.0028.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251113103924.3737425-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c77b3b79a9 upstream.
The sockmap feature allows bpf syscall from userspace, or based
on bpf sockops, replacing the sk_prot of sockets during protocol stack
processing with sockmap's custom read/write interfaces.
'''
tcp_rcv_state_process()
syn_recv_sock()/subflow_syn_recv_sock()
tcp_init_transfer(BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB)
bpf_skops_established <== sockops
bpf_sock_map_update(sk) <== call bpf helper
tcp_bpf_update_proto() <== update sk_prot
'''
When the server has MPTCP enabled but the client sends a TCP SYN
without MPTCP, subflow_syn_recv_sock() performs a fallback on the
subflow, replacing the subflow sk's sk_prot with the native sk_prot.
'''
subflow_syn_recv_sock()
subflow_ulp_fallback()
subflow_drop_ctx()
mptcp_subflow_ops_undo_override()
'''
Then, this subflow can be normally used by sockmap, which replaces the
native sk_prot with sockmap's custom sk_prot. The issue occurs when the
user executes accept::mptcp_stream_accept::mptcp_fallback_tcp_ops().
Here, it uses sk->sk_prot to compare with the native sk_prot, but this
is incorrect when sockmap is used, as we may incorrectly set
sk->sk_socket->ops.
This fix uses the more generic sk_family for the comparison instead.
Additionally, this also prevents a WARNING from occurring:
result from ./scripts/decode_stacktrace.sh:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 337 at net/mptcp/protocol.c:68 mptcp_stream_accept \
(net/mptcp/protocol.c:4005)
Modules linked in:
...
PKRU: 55555554
Call Trace:
<TASK>
do_accept (net/socket.c:1989)
__sys_accept4 (net/socket.c:2028 net/socket.c:2057)
__x64_sys_accept (net/socket.c:2067)
x64_sys_call (arch/x86/entry/syscall_64.c:41)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
RIP: 0033:0x7f87ac92b83d
---[ end trace 0000000000000000 ]---
Fixes: 0b4f33def7 ("mptcp: fix tcp fallback crash")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20251111060307.194196-3-jiayuan.chen@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fbade4bd08 upstream.
The sockmap feature allows bpf syscall from userspace, or based on bpf
sockops, replacing the sk_prot of sockets during protocol stack processing
with sockmap's custom read/write interfaces.
'''
tcp_rcv_state_process()
subflow_syn_recv_sock()
tcp_init_transfer(BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB)
bpf_skops_established <== sockops
bpf_sock_map_update(sk) <== call bpf helper
tcp_bpf_update_proto() <== update sk_prot
'''
Consider two scenarios:
1. When the server has MPTCP enabled and the client also requests MPTCP,
the sk passed to the BPF program is a subflow sk. Since subflows only
handle partial data, replacing their sk_prot is meaningless and will
cause traffic disruption.
2. When the server has MPTCP enabled but the client sends a TCP SYN
without MPTCP, subflow_syn_recv_sock() performs a fallback on the
subflow, replacing the subflow sk's sk_prot with the native sk_prot.
'''
subflow_ulp_fallback()
subflow_drop_ctx()
mptcp_subflow_ops_undo_override()
'''
Subsequently, accept::mptcp_stream_accept::mptcp_fallback_tcp_ops()
converts the subflow to plain TCP.
For the first case, we should prevent it from being combined with sockmap
by setting sk_prot->psock_update_sk_prot to NULL, which will be blocked by
sockmap's own flow.
For the second case, since subflow_syn_recv_sock() has already restored
sk_prot to native tcp_prot/tcpv6_prot, no further action is needed.
Fixes: cec37a6e41 ("mptcp: Handle MP_CAPABLE options for outgoing connections")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20251111060307.194196-2-jiayuan.chen@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 27b0e701d3 upstream.
Accessing the transmit queue without owning the msk socket lock is
inherently racy, hence __mptcp_check_push() could actually quit early
even when there is pending data.
That in turn could cause unexpected tx lock and timeout.
Dropping the early check avoids the race, implicitly relaying on later
tests under the relevant lock. With such change, all the other
mptcp_send_head() call sites are now under the msk socket lock and we
can additionally drop the now unneeded annotation on the transmit head
pointer accesses.
Fixes: 6e628cd3a8 ("mptcp: use mptcp release_cb for delayed tasks")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Tested-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251028-net-mptcp-send-timeout-v1-1-38ffff5a9ec8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e84cb860ac ]
The special C-flag case expects the ADD_ADDR to be received when
switching to 'fully-established'. But for various reasons, the ADD_ADDR
could be sent after the "4th ACK", and the special case doesn't work.
On NIPA, the new test validating this special case for the C-flag failed
a few times, e.g.
102 default limits, server deny join id 0
syn rx [FAIL] got 0 JOIN[s] syn rx expected 2
Server ns stats
(...)
MPTcpExtAddAddrTx 1
MPTcpExtEchoAdd 1
Client ns stats
(...)
MPTcpExtAddAddr 1
MPTcpExtEchoAddTx 1
synack rx [FAIL] got 0 JOIN[s] synack rx expected 2
ack rx [FAIL] got 0 JOIN[s] ack rx expected 2
join Rx [FAIL] see above
syn tx [FAIL] got 0 JOIN[s] syn tx expected 2
join Tx [FAIL] see above
I had a suspicion about what the issue could be: the ADD_ADDR might have
been received after the switch to the 'fully-established' state. The
issue was not easy to reproduce. The packet capture shown that the
ADD_ADDR can indeed be sent with a delay, and the client would not try
to establish subflows to it as expected.
A simple fix is not to mark the endpoints as 'used' in the C-flag case,
when looking at creating subflows to the remote initial IP address and
port. In this case, there is no need to try.
Note: newly added fullmesh endpoints will still continue to be used as
expected, thanks to the conditions behind mptcp_pm_add_addr_c_flag_case.
Fixes: 4b1ff850e0 ("mptcp: pm: in-kernel: usable client side with C-flag")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251020-net-mptcp-c-flag-late-add-addr-v1-1-8207030cb0e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ applied to pm_netlink.c instead of pm_kernel.c ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4b1ff850e0 upstream.
When servers set the C-flag in their MP_CAPABLE to tell clients not to
create subflows to the initial address and port, clients will likely not
use their other endpoints. That's because the in-kernel path-manager
uses the 'subflow' endpoints to create subflows only to the initial
address and port.
If the limits have not been modified to accept ADD_ADDR, the client
doesn't try to establish new subflows. If the limits accept ADD_ADDR,
the routing routes will be used to select the source IP.
The C-flag is typically set when the server is operating behind a legacy
Layer 4 load balancer, or using anycast IP address. Clients having their
different 'subflow' endpoints setup, don't end up creating multiple
subflows as expected, and causing some deployment issues.
A special case is then added here: when servers set the C-flag in the
MPC and directly sends an ADD_ADDR, this single ADD_ADDR is accepted.
The 'subflows' endpoints will then be used with this new remote IP and
port. This exception is only allowed when the ADD_ADDR is sent
immediately after the 3WHS, and makes the client switching to the 'fully
established' mode. After that, 'select_local_address()' will not be able
to find any subflows, because 'id_avail_bitmap' will be filled in
mptcp_pm_create_subflow_or_signal_addr(), when switching to 'fully
established' mode.
Fixes: df377be387 ("mptcp: add deny_join_id0 in mptcp_options_received")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/536
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-1-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Conflict in pm.c, because commit 498d7d8b75 ("mptcp: pm: remove
'_nl' from mptcp_pm_nl_is_init_remote_addr") renamed an helper in the
context, and it is not in this version. The same new code can be
applied at the same place.
Conflict in pm_kernel.c, because the modified code has been moved from
pm_netlink.c to pm_kernel.c in commit 8617e85e04 ("mptcp: pm: split
in-kernel PM specific code"), which is not in this version. The
resolution is easy: simply by applying the patch where 'pm_kernel.c'
has been replaced 'pm_netlink.c'. 'patch --merge' managed to apply
this modified patch without creating any conflicts. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2293c57484 upstream.
During the connection establishment, a peer can tell the other one that
it cannot establish new subflows to the initial IP address and port by
setting the 'C' flag [1]. Doing so makes sense when the sender is behind
a strict NAT, operating behind a legacy Layer 4 load balancer, or using
anycast IP address for example.
When this 'C' flag is set, the path-managers must then not try to
establish new subflows to the other peer's initial IP address and port.
The in-kernel PM has access to this info, but the userspace PM didn't.
The RFC8684 [1] is strict about that:
(...) therefore the receiver MUST NOT try to open any additional
subflows toward this address and port.
So it is important to tell the userspace about that as it is responsible
for the respect of this flag.
When a new connection is created and established, the Netlink events
now contain the existing but not currently used 'flags' attribute. When
MPTCP_PM_EV_FLAG_DENY_JOIN_ID0 is set, it means no other subflows
to the initial IP address and port -- info that are also part of the
event -- can be established.
Link: https://datatracker.ietf.org/doc/html/rfc8684#section-3.1-20.6 [1]
Fixes: 702c2f646d ("mptcp: netlink: allow userspace-driven subflow establishment")
Reported-by: Marek Majkowski <marek@cloudflare.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/532
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-pm-uspace-deny_join_id0-v1-2-40171884ade8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Conflicts in mptcp_pm.yaml, because the indentation has been modified
in commit ec362192aa ("netlink: specs: fix up indentation errors"),
which is not in this version. Applying the same modifications, but at
a different level. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f755be0b1f upstream.
When the MPTCP DATA FIN have been ACKed, there is no more MPTCP related
metadata to exchange, and all subflows can be safely shutdown.
Before this patch, the subflows were actually terminated at 'close()'
time. That's certainly fine most of the time, but not when the userspace
'shutdown()' a connection, without close()ing it. When doing so, the
subflows were staying in LAST_ACK state on one side -- and consequently
in FIN_WAIT2 on the other side -- until the 'close()' of the MPTCP
socket.
Now, when the DATA FIN have been ACKed, all subflows are shutdown. A
consequence of this is that the TCP 'FIN' flag can be set earlier now,
but the end result is the same. This affects the packetdrill tests
looking at the end of the MPTCP connections, but for a good reason.
Note that tcp_shutdown() will check the subflow state, so no need to do
that again before calling it.
Fixes: 3721b9b646 ("mptcp: Track received DATA_FIN sequence number and add related helpers")
Cc: stable@vger.kernel.org
Fixes: 16a9a9da17 ("mptcp: Add helper to process acks of DATA_FIN")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-fix-sft-connect-v1-1-d40e77cbbf02@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 96939cec99 ]
When a SYN containing the 'C' flag (deny join id0) was received, this
piece of information was not propagated to the path-manager.
Even if this flag is mainly set on the server side, a client can also
tell the server it cannot try to establish new subflows to the client's
initial IP address and port. The server's PM should then record such
info when received, and before sending events about the new connection.
Fixes: df377be387 ("mptcp: add deny_join_id0 in mptcp_options_received")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-pm-uspace-deny_join_id0-v1-1-40171884ade8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 648de37416 upstream.
Users reported a scenario where MPTCP connections that were configured
with SO_KEEPALIVE prior to connect would fail to enable their keepalives
if MTPCP fell back to TCP mode.
After investigating, this affects keepalives for any connection where
sync_socket_options is called on a socket that is in the closed or
listening state. Joins are handled properly. For connects,
sync_socket_options is called when the socket is still in the closed
state. The tcp_set_keepalive() function does not act on sockets that
are closed or listening, hence keepalive is not immediately enabled.
Since the SO_KEEPOPEN flag is absent, it is not enabled later in the
connect sequence via tcp_finish_connect. Setting the keepalive via
sockopt after connect does work, but would not address any subsequently
created flows.
Fortunately, the fix here is straight-forward: set SOCK_KEEPOPEN on the
subflow when calling sync_socket_options.
The fix was valdidated both by using tcpdump to observe keepalive
packets not being sent before the fix, and being sent after the fix. It
was also possible to observe via ss that the keepalive timer was not
enabled on these sockets before the fix, but was enabled afterwards.
Fixes: 1b3e7ede13 ("mptcp: setsockopt: handle SO_KEEPALIVE and SO_PRIORITY")
Cc: stable@vger.kernel.org
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/aL8dYfPZrwedCIh9@templeofstupid.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ccab044697 upstream.
When skb_ext_add(skb, SKB_EXT_MPTCP) fails in mptcp_incoming_options(),
we used to return true, letting the segment proceed through the TCP
receive path without a DSS mapping. Such segments can leave inconsistent
mapping state and trigger a mid-stream fallback to TCP, which in testing
collapsed (by artificially forcing failures in skb_ext_add) throughput
to zero.
Return false instead so the TCP input path drops the skb (see
tcp_data_queue() and step-7 processing). This is the safer choice
under memory pressure: it preserves MPTCP correctness and provides
backpressure to the sender.
Control packets remain unaffected: ACK updates and DATA_FIN handling
happen before attempting the extension allocation, and tcp_reset()
continues to ignore the return value.
With this change, MPTCP continues to work at high throughput if we
artificially inject failures into skb_ext_add.
Fixes: 6787b7e350 ("mptcp: avoid processing packet if a subflow reset")
Cc: stable@vger.kernel.org
Signed-off-by: Christoph Paasch <cpaasch@openai.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-1-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit def5b7b264 upstream.
We have races similar to the one addressed by the previous patch between
subflow failing and additional subflow creation. They are just harder to
trigger.
The solution is similar. Use a separate flag to track the condition
'socket state prevent any additional subflow creation' protected by the
fallback lock.
The socket fallback makes such flag true, and also receiving or sending
an MP_FAIL option.
The field 'allow_infinite_fallback' is now always touched under the
relevant lock, we can drop the ONCE annotation on write.
Fixes: 478d770008 ("mptcp: send out MP_FAIL when data checksum fails")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250714-net-mptcp-fallback-races-v1-2-391aff963322@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 58b21309f9 ]
Since its introduction in commit 892f396c8e ("mptcp: netlink: issue
MP_PRIO signals from userspace PMs"), it was mandatory to specify the
remote address, because of the 'if (rem->addr.family == AF_UNSPEC)'
check done later one.
In theory, this attribute can be optional, but it sounds better to be
precise to avoid sending the MP_PRIO on the wrong subflow, e.g. if there
are multiple subflows attached to the same local ID. This can be relaxed
later on if there is a need to act on multiple subflows with one
command.
For the moment, the check to see if attr_rem is NULL can be removed,
because mptcp_pm_parse_entry() will do this check as well, no need to do
that differently here.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 443041deb5 upstream.
When testing valkey benchmark tool with MPTCP, the kernel panics in
'mptcp_can_accept_new_subflow' because subflow_req->msk is NULL.
Call trace:
mptcp_can_accept_new_subflow (./net/mptcp/subflow.c:63 (discriminator 4)) (P)
subflow_syn_recv_sock (./net/mptcp/subflow.c:854)
tcp_check_req (./net/ipv4/tcp_minisocks.c:863)
tcp_v4_rcv (./net/ipv4/tcp_ipv4.c:2268)
ip_protocol_deliver_rcu (./net/ipv4/ip_input.c:207)
ip_local_deliver_finish (./net/ipv4/ip_input.c:234)
ip_local_deliver (./net/ipv4/ip_input.c:254)
ip_rcv_finish (./net/ipv4/ip_input.c:449)
...
According to the debug log, the same req received two SYN-ACK in a very
short time, very likely because the client retransmits the syn ack due
to multiple reasons.
Even if the packets are transmitted with a relevant time interval, they
can be processed by the server on different CPUs concurrently). The
'subflow_req->msk' ownership is transferred to the subflow the first,
and there will be a risk of a null pointer dereference here.
This patch fixes this issue by moving the 'subflow_req->msk' under the
`own_req == true` conditional.
Note that the !msk check in subflow_hmac_valid() can be dropped, because
the same check already exists under the own_req mpj branch where the
code has been moved to.
Fixes: 9466a1cceb ("mptcp: enable JOIN requests even if cookies are in use")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250328-net-mptcp-misc-fixes-6-15-v1-1-34161a482a7f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e2f4ac7bab upstream.
When adding a socket option support in MPTCP, both the get and set parts
are supposed to be implemented.
IP(V6)_FREEBIND and IP(V6)_TRANSPARENT support for the setsockopt part
has been added a while ago, but it looks like the get part got
forgotten. It should have been present as a way to verify a setting has
been set as expected, and not to act differently from TCP or any other
socket types.
Everything was in place to expose it, just the last step was missing.
Only new code is added to cover these specific getsockopt(), that seems
safe.
Fixes: c9406a23c1 ("mptcp: sockopt: add SOL_IP freebind & transparent options")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250314-net-mptcp-fix-data-stream-corr-sockopt-v1-3-122dbb249db3@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8c39633759 upstream.
When adding a socket option support in MPTCP, both the get and set parts
are supposed to be implemented.
IPV6_V6ONLY support for the setsockopt part has been added a while ago,
but it looks like the get part got forgotten. It should have been
present as a way to verify a setting has been set as expected, and not
to act differently from TCP or any other socket types.
Not supporting this getsockopt(IPV6_V6ONLY) blocks some apps which want
to check the default value, before doing extra actions. On Linux, the
default value is 0, but this can be changed with the net.ipv6.bindv6only
sysctl knob. On Windows, it is set to 1 by default. So supporting the
get part, like for all other socket options, is important.
Everything was in place to expose it, just the last step was missing.
Only new code is added to cover this specific getsockopt(), that seems
safe.
Fixes: c9b95a1359 ("mptcp: support IPV6_V6ONLY setsockopt")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/550
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250314-net-mptcp-fix-data-stream-corr-sockopt-v1-2-122dbb249db3@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2c1f97a52c upstream.
Because of the size restriction in the TCP options space, the MPTCP
ADD_ADDR option is exclusive and cannot be sent with other MPTCP ones.
For this reason, in the linked mptcp_out_options structure, group of
fields linked to different options are part of the same union.
There is a case where the mptcp_pm_add_addr_signal() function can modify
opts->addr, but not ended up sending an ADD_ADDR. Later on, back in
mptcp_established_options, other options will be sent, but with
unexpected data written in other fields due to the union, e.g. in
opts->ext_copy. This could lead to a data stream corruption in the next
packet.
Using an intermediate variable, prevents from corrupting previously
established DSS option. The assignment of the ADD_ADDR option
parameters is now done once we are sure this ADD_ADDR option can be set
in the packet, e.g. after having dropped other suboptions.
Fixes: 1bff1e43a3 ("mptcp: optimize out option generation")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Arthur Mongodin <amongodin@randorisec.fr>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
[ Matt: the commit message has been updated: long lines splits and some
clarifications. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250314-net-mptcp-fix-data-stream-corr-sockopt-v1-1-122dbb249db3@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 022bfe24aa upstream.
If multiple connection requests attempt to create an implicit mptcp
endpoint in parallel, more than one caller may end up in
mptcp_pm_nl_append_new_local_addr because none found the address in
local_addr_list during their call to mptcp_pm_nl_get_local_id. In this
case, the concurrent new_local_addr calls may delete the address entry
created by the previous caller. These deletes use synchronize_rcu, but
this is not permitted in some of the contexts where this function may be
called. During packet recv, the caller may be in a rcu read critical
section and have preemption disabled.
An example stack:
BUG: scheduling while atomic: swapper/2/0/0x00000302
Call Trace:
<IRQ>
dump_stack_lvl (lib/dump_stack.c:117 (discriminator 1))
dump_stack (lib/dump_stack.c:124)
__schedule_bug (kernel/sched/core.c:5943)
schedule_debug.constprop.0 (arch/x86/include/asm/preempt.h:33 kernel/sched/core.c:5970)
__schedule (arch/x86/include/asm/jump_label.h:27 include/linux/jump_label.h:207 kernel/sched/features.h:29 kernel/sched/core.c:6621)
schedule (arch/x86/include/asm/preempt.h:84 kernel/sched/core.c:6804 kernel/sched/core.c:6818)
schedule_timeout (kernel/time/timer.c:2160)
wait_for_completion (kernel/sched/completion.c:96 kernel/sched/completion.c:116 kernel/sched/completion.c:127 kernel/sched/completion.c:148)
__wait_rcu_gp (include/linux/rcupdate.h:311 kernel/rcu/update.c:444)
synchronize_rcu (kernel/rcu/tree.c:3609)
mptcp_pm_nl_append_new_local_addr (net/mptcp/pm_netlink.c:966 net/mptcp/pm_netlink.c:1061)
mptcp_pm_nl_get_local_id (net/mptcp/pm_netlink.c:1164)
mptcp_pm_get_local_id (net/mptcp/pm.c:420)
subflow_check_req (net/mptcp/subflow.c:98 net/mptcp/subflow.c:213)
subflow_v4_route_req (net/mptcp/subflow.c:305)
tcp_conn_request (net/ipv4/tcp_input.c:7216)
subflow_v4_conn_request (net/mptcp/subflow.c:651)
tcp_rcv_state_process (net/ipv4/tcp_input.c:6709)
tcp_v4_do_rcv (net/ipv4/tcp_ipv4.c:1934)
tcp_v4_rcv (net/ipv4/tcp_ipv4.c:2334)
ip_protocol_deliver_rcu (net/ipv4/ip_input.c:205 (discriminator 1))
ip_local_deliver_finish (include/linux/rcupdate.h:813 net/ipv4/ip_input.c:234)
ip_local_deliver (include/linux/netfilter.h:314 include/linux/netfilter.h:308 net/ipv4/ip_input.c:254)
ip_sublist_rcv_finish (include/net/dst.h:461 net/ipv4/ip_input.c:580)
ip_sublist_rcv (net/ipv4/ip_input.c:640)
ip_list_rcv (net/ipv4/ip_input.c:675)
__netif_receive_skb_list_core (net/core/dev.c:5583 net/core/dev.c:5631)
netif_receive_skb_list_internal (net/core/dev.c:5685 net/core/dev.c:5774)
napi_complete_done (include/linux/list.h:37 include/net/gro.h:449 include/net/gro.h:444 net/core/dev.c:6114)
igb_poll (drivers/net/ethernet/intel/igb/igb_main.c:8244) igb
__napi_poll (net/core/dev.c:6582)
net_rx_action (net/core/dev.c:6653 net/core/dev.c:6787)
handle_softirqs (kernel/softirq.c:553)
__irq_exit_rcu (kernel/softirq.c:588 kernel/softirq.c:427 kernel/softirq.c:636)
irq_exit_rcu (kernel/softirq.c:651)
common_interrupt (arch/x86/kernel/irq.c:247 (discriminator 14))
</IRQ>
This problem seems particularly prevalent if the user advertises an
endpoint that has a different external vs internal address. In the case
where the external address is advertised and multiple connections
already exist, multiple subflow SYNs arrive in parallel which tends to
trigger the race during creation of the first local_addr_list entries
which have the internal address instead.
Fix by skipping the replacement of an existing implicit local address if
called via mptcp_pm_nl_get_local_id.
Fixes: d045b9eb95 ("mptcp: introduce implicit endpoints")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250303-net-mptcp-fix-sched-while-atomic-v1-1-f6a216c5a74c@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Abeni
Eric Dumazet
Matthieu Baerts (NGI0)
Kuniyuki Iwashima
Jiayuan Chen
Krister Johansen
Geliang Tang
Christoph Paasch
Gang Yan
Arthur Mongodin