commit 8e135b8aee upstream.
AppArmor was putting the reference to i_private data on its end after
removing the original entry from the file system. However the inode
can aand does live beyond that point and it is possible that some of
the fs call back functions will be invoked after the reference has
been put, which results in a race between freeing the data and
accessing it through the fs.
While the rawdata/loaddata is the most likely candidate to fail the
race, as it has the fewest references. If properly crafted it might be
possible to trigger a race for the other types stored in i_private.
Fix this by moving the put of i_private referenced data to the correct
place which is during inode eviction.
Fixes: c961ee5f21 ("apparmor: convert from securityfs to apparmorfs for policy ns files")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Reviewed-by: Maxime Bélair <maxime.belair@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a0b7091c4d upstream.
There is a race condition that leads to a use-after-free situation:
because the rawdata inodes are not refcounted, an attacker can start
open()ing one of the rawdata files, and at the same time remove the
last reference to this rawdata (by removing the corresponding profile,
for example), which frees its struct aa_loaddata; as a result, when
seq_rawdata_open() is reached, i_private is a dangling pointer and
freed memory is accessed.
The rawdata inodes weren't refcounted to avoid a circular refcount and
were supposed to be held by the profile rawdata reference. However
during profile removal there is a window where the vfs and profile
destruction race, resulting in the use after free.
Fix this by moving to a double refcount scheme. Where the profile
refcount on rawdata is used to break the circular dependency. Allowing
for freeing of the rawdata once all inode references to the rawdata
are put.
Fixes: 5d5182cae4 ("apparmor: move to per loaddata files, instead of replicating in profiles")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Reviewed-by: Maxime Bélair <maxime.belair@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 39440b1375 upstream.
Differential encoding allows loops to be created if it is abused. To
prevent this the unpack should verify that a diff-encode chain
terminates.
Unfortunately the differential encode verification had two bugs.
1. it conflated states that had gone through check and already been
marked, with states that were currently being checked and marked.
This means that loops in the current chain being verified are treated
as a chain that has already been verified.
2. the order bailout on already checked states compared current chain
check iterators j,k instead of using the outer loop iterator i.
Meaning a step backwards in states in the current chain verification
was being mistaken for moving to an already verified state.
Move to a double mark scheme where already verified states get a
different mark, than the current chain being kept. This enables us
to also drop the backwards verification check that was the cause of
the second error as any already verified state is already marked.
Fixes: 031dcc8f4e ("apparmor: dfa add support for state differential encoding")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6601e13e82 upstream.
An unprivileged local user can load, replace, and remove profiles by
opening the apparmorfs interfaces, via a confused deputy attack, by
passing the opened fd to a privileged process, and getting the
privileged process to write to the interface.
This does require a privileged target that can be manipulated to do
the write for the unprivileged process, but once such access is
achieved full policy management is possible and all the possible
implications that implies: removing confinement, DoS of system or
target applications by denying all execution, by-passing the
unprivileged user namespace restriction, to exploiting kernel bugs for
a local privilege escalation.
The policy management interface can not have its permissions simply
changed from 0666 to 0600 because non-root processes need to be able
to load policy to different policy namespaces.
Instead ensure the task writing the interface has privileges that
are a subset of the task that opened the interface. This is already
done via policy for confined processes, but unconfined can delegate
access to the opened fd, by-passing the usual policy check.
Fixes: b7fd2c0340 ("apparmor: add per policy ns .load, .replace, .remove interface files")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5df0c44e8f upstream.
if ns_name is NULL after
1071 error = aa_unpack(udata, &lh, &ns_name);
and if ent->ns_name contains an ns_name in
1089 } else if (ent->ns_name) {
then ns_name is assigned the ent->ns_name
1095 ns_name = ent->ns_name;
however ent->ns_name is freed at
1262 aa_load_ent_free(ent);
and then again when freeing ns_name at
1270 kfree(ns_name);
Fix this by NULLing out ent->ns_name after it is transferred to ns_name
Fixes: 145a0ef21c ("apparmor: fix blob compression when ns is forced on a policy load")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3060394149 upstream.
Currently the number of policy namespaces is not bounded relying on
the user namespace limit. However policy namespaces aren't strictly
tied to user namespaces and it is possible to create them and nest
them arbitrarily deep which can be used to exhaust system resource.
Hard cap policy namespaces to the same depth as user namespaces.
Fixes: c88d4c7b04 ("AppArmor: core policy routines")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Reviewed-by: Ryan Lee <ryan.lee@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ab09264660 upstream.
The profile removal code uses recursion when removing nested profiles,
which can lead to kernel stack exhaustion and system crashes.
Reproducer:
$ pf='a'; for ((i=0; i<1024; i++)); do
echo -e "profile $pf { \n }" | apparmor_parser -K -a;
pf="$pf//x";
done
$ echo -n a > /sys/kernel/security/apparmor/.remove
Replace the recursive __aa_profile_list_release() approach with an
iterative approach in __remove_profile(). The function repeatedly
finds and removes leaf profiles until the entire subtree is removed,
maintaining the same removal semantic without recursion.
Fixes: c88d4c7b04 ("AppArmor: core policy routines")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Signed-off-by: Massimiliano Pellizzer <massimiliano.pellizzer@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e38c55d9f8 upstream.
The function sets `*ns = NULL` on every call, leaking the namespace
string allocated in previous iterations when multiple profiles are
unpacked. This also breaks namespace consistency checking since *ns
is always NULL when the comparison is made.
Remove the incorrect assignment.
The caller (aa_unpack) initializes *ns to NULL once before the loop,
which is sufficient.
Fixes: dd51c84857 ("apparmor: provide base for multiple profiles to be replaced at once")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Signed-off-by: Massimiliano Pellizzer <massimiliano.pellizzer@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9063d7e261 upstream.
Start states are read from untrusted data and used as indexes into the
DFA state tables. The aa_dfa_next() function call in unpack_pdb() will
access dfa->tables[YYTD_ID_BASE][start], and if the start state exceeds
the number of states in the DFA, this results in an out-of-bound read.
==================================================================
BUG: KASAN: slab-out-of-bounds in aa_dfa_next+0x2a1/0x360
Read of size 4 at addr ffff88811956fb90 by task su/1097
...
Reject policies with out-of-bounds start states during unpacking
to prevent the issue.
Fixes: ad5ff3db53 ("AppArmor: Add ability to load extended policy")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Signed-off-by: Massimiliano Pellizzer <massimiliano.pellizzer@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f18e502db6 ]
The IMA log is currently copied to the new kernel during kexec 'load'
using ima_dump_measurement_list(). However, the log copied at kexec
'load' may result in loss of IMA measurements that only occurred after
kexec "load'. Setup the needed infrastructure to move the IMA log copy
from kexec 'load' to 'execute'.
Define a new IMA hook ima_update_kexec_buffer() as a stub function.
It will be used to call ima_dump_measurement_list() during kexec 'execute'.
Implement ima_kexec_post_load() function to be invoked after the new
Kernel image has been loaded for kexec. ima_kexec_post_load() maps the
IMA buffer to a segment in the newly loaded Kernel. It also registers
the reboot notifier_block to trigger ima_update_kexec_buffer() at
kexec 'execute'.
Set the priority of register_reboot_notifier to INT_MIN to ensure that the
IMA log copy operation will happen at the end of the operation chain, so
that all the IMA measurement records extended into the TPM are copied
Co-developed-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Signed-off-by: Steven Chen <chenste@linux.microsoft.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com> # ppc64/kvm
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Stable-dep-of: 10d1c75ed4 ("ima: verify the previous kernel's IMA buffer lies in addressable RAM")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c95e1acb6d ]
In the current implementation, the ima_dump_measurement_list() API is
called during the kexec "load" phase, where a buffer is allocated and
the measurement records are copied. Due to this, new events added after
kexec load but before kexec execute are not carried over to the new kernel
during kexec operation
Carrying the IMA measurement list across kexec requires allocating a
buffer and copying the measurement records. Separate allocating the
buffer and copying the measurement records into separate functions in
order to allocate the buffer at kexec 'load' and copy the measurements
at kexec 'execute'.
After moving the vfree() here at this stage in the patch set, the IMA
measurement list fails to verify when doing two consecutive "kexec -s -l"
with/without a "kexec -s -u" in between. Only after "ima: kexec: move
IMA log copy from kexec load to execute" the IMA measurement list verifies
properly with the vfree() here.
Co-developed-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Steven Chen <chenste@linux.microsoft.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com> # ppc64/kvm
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Stable-dep-of: 10d1c75ed4 ("ima: verify the previous kernel's IMA buffer lies in addressable RAM")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cb5052282c ]
Before making the function local seq_file "file" variable file static
global, rename it to "ima_kexec_file".
Signed-off-by: Steven Chen <chenste@linux.microsoft.com>
Acked-by: Baoquan He <bhe@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com> # ppc64/kvm
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Stable-dep-of: 10d1c75ed4 ("ima: verify the previous kernel's IMA buffer lies in addressable RAM")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 68af44a719 ]
The ima_measurements list is append-only and doesn't require
rcu_read_lock() protection. However, lockdep issues a warning when
traversing RCU lists without the read lock:
security/integrity/ima/ima_kexec.c:40 RCU-list traversed in non-reader section!!
Fix this by using the variant of list_for_each_entry_rcu() with the last
argument set to true. This tells the RCU subsystem that traversing this
append-only list without the read lock is intentional and safe.
This change silences the lockdep warning while maintaining the correct
semantics for the append-only list traversal.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Stable-dep-of: 10d1c75ed4 ("ima: verify the previous kernel's IMA buffer lies in addressable RAM")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 640cf2f095 ]
When aa_get_buffer() pulls from the per-cpu list it unconditionally
decrements cache->hold. If hold reaches 0 while count is still non-zero,
the unsigned decrement wraps to UINT_MAX. This keeps hold non-zero for a
very long time, so aa_put_buffer() never returns buffers to the global
list, which can starve other CPUs and force repeated kmalloc(aa_g_path_max)
allocations.
Guard the decrement so hold never underflows.
Fixes: ea9bae12d0 ("apparmor: cache buffers on percpu list if there is lock contention")
Signed-off-by: Zhengmian Hu <huzhengmian@gmail.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a4c9efa4db ]
compound match is inconsistent in returning a state or an integer error
this is problemati if the error is ever used as a state in the state
machine
Fixes: f1bd904175 ("apparmor: add the base fns() for domain labels")
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b2e27be294 ]
The modes shouldn't be applied at the point of label match, it just
results in them being applied multiple times. Instead they should be
applied after which is already being done by all callers so it can
just be dropped from label_match.
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Stable-dep-of: a4c9efa4db ("apparmor: make label_match return a consistent value")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ca56813f4 ]
Posix cpu timers requires an additional step beyond setting the rlimit.
Refactor the code so its clear when what code is setting the
limit and conditionally update the posix cpu timers when appropriate.
Fixes: baa73d9e47 ("posix-timers: Make them configurable")
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 74b7105e53 ]
In policy_unpack.c:unpack_perms_table, the perms struct is allocated via
kcalloc, with the position being reset if the allocation fails. However,
the error path results in -EPROTO being retured instead of -ENOMEM. Fix
this to return the correct error code.
Reported-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
Fixes: fd1b2b95a2 ("apparmor: add the ability for policy to specify a permission table")
Reviewed-by: Tyler Hicks <code@tyhicks.com>
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6fc367bfd4 ]
Source blob may come from userspace and might be unaligned.
Try to optize the copying process by avoiding unaligned memory accesses.
- Added Fixes tag
- Added "Fix &" to description as this doesn't just optimize but fixes
a potential unaligned memory access
Fixes: e6e8bf4188 ("apparmor: fix restricted endian type warnings for dfa unpack")
Signed-off-by: Helge Deller <deller@gmx.de>
[jj: remove duplicate word "convert" in comment trigger checkpatch warning]
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00b6765753 ]
Deal with the potential that sock and sock-sk can be NULL during
socket setup or teardown. This could lead to an oops. The fix for NULL
pointer dereference in __unix_needs_revalidation shows this is at
least possible for af_unix sockets. While the fix for af_unix sockets
applies for newer mediation this is still the fall back path for older
af_unix mediation and other sockets, so ensure it is covered.
Fixes: 56974a6fcf ("apparmor: add base infastructure for socket mediation")
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0496fc9cdc ]
Commit 8e5d9f916a ("smack: deduplicate xattr setting in
smack_inode_init_security()") introduced xattr_dupval() to simplify setting
the xattrs to be provided by the SMACK LSM on inode creation, in the
smack_inode_init_security().
Unfortunately, moving lsm_get_xattr_slot() caused the SMACK64TRANSMUTE
xattr be added in the array of new xattrs before SMACK64. This causes the
HMAC of xattrs calculated by evm_init_hmac() for new files to diverge from
the one calculated by both evm_calc_hmac_or_hash() and evmctl.
evm_init_hmac() calculates the HMAC of the xattrs of new files based on the
order LSMs provide them, while evm_calc_hmac_or_hash() and evmctl calculate
the HMAC based on an ordered xattrs list.
Fix the issue by making evm_init_hmac() calculate the HMAC of new files
based on the ordered xattrs list too.
Fixes: 8e5d9f916a ("smack: deduplicate xattr setting in smack_inode_init_security()")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 33d589ed60 ]
Writing to /smack/doi a value that has ever been
written there in the past disables networking for
non-ambient labels.
E.g.
# cat /smack/doi
3
# netlabelctl -p cipso list
Configured CIPSO mappings (1)
DOI value : 3
mapping type : PASS_THROUGH
# netlabelctl -p map list
Configured NetLabel domain mappings (3)
domain: "_" (IPv4)
protocol: UNLABELED
domain: DEFAULT (IPv4)
protocol: CIPSO, DOI = 3
domain: DEFAULT (IPv6)
protocol: UNLABELED
# cat /smack/ambient
_
# cat /proc/$$/attr/smack/current
_
# ping -c1 10.1.95.12
64 bytes from 10.1.95.12: icmp_seq=1 ttl=64 time=0.964 ms
# echo foo >/proc/$$/attr/smack/current
# ping -c1 10.1.95.12
64 bytes from 10.1.95.12: icmp_seq=1 ttl=64 time=0.956 ms
unknown option 86
# echo 4 >/smack/doi
# echo 3 >/smack/doi
!> [ 214.050395] smk_cipso_doi:691 cipso add rc = -17
# echo 3 >/smack/doi
!> [ 249.402261] smk_cipso_doi:678 remove rc = -2
!> [ 249.402261] smk_cipso_doi:691 cipso add rc = -17
# ping -c1 10.1.95.12
!!> ping: 10.1.95.12: Address family for hostname not supported
# echo _ >/proc/$$/attr/smack/current
# ping -c1 10.1.95.12
64 bytes from 10.1.95.12: icmp_seq=1 ttl=64 time=0.617 ms
This happens because Smack keeps decommissioned DOIs,
fails to re-add them, and consequently refuses to add
the “default” domain map:
# netlabelctl -p cipso list
Configured CIPSO mappings (2)
DOI value : 3
mapping type : PASS_THROUGH
DOI value : 4
mapping type : PASS_THROUGH
# netlabelctl -p map list
Configured NetLabel domain mappings (2)
domain: "_" (IPv4)
protocol: UNLABELED
!> (no ipv4 map for default domain here)
domain: DEFAULT (IPv6)
protocol: UNLABELED
Fix by clearing decommissioned DOI definitions and
serializing concurrent DOI updates with a new lock.
Also:
- allow /smack/doi to live unconfigured, since
adding a map (netlbl_cfg_cipsov4_map_add) may fail.
CIPSO_V4_DOI_UNKNOWN(0) indicates the unconfigured DOI
- add new DOI before removing the old default map,
so the old map remains if the add fails
(2008-02-04, Casey Schaufler)
Fixes: e114e47377 ("Smack: Simplified Mandatory Access Control Kernel")
Signed-off-by: Konstantin Andreev <andreev@swemel.ru>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6342969daf ]
TPM2_Unseal[1] expects the handle of a loaded data object, and not the
handle of the parent key. But the tpm2_unseal_cmd provides the parent
keyhandle instead of blob_handle for the session HMAC calculation. This
causes unseal to fail.
Fix this by passing blob_handle to tpm_buf_append_name().
References:
[1] trustedcomputinggroup.org/wp-content/uploads/
Trusted-Platform-Module-2.0-Library-Part-3-Version-184_pub.pdf
Fixes: 6e9722e9a7 ("tpm2-sessions: Fix out of range indexing in name_size")
Signed-off-by: Srish Srinivasan <ssrish@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 6e9722e9a7 upstream.
'name_size' does not have any range checks, and it just directly indexes
with TPM_ALG_ID, which could lead into memory corruption at worst.
Address the issue by only processing known values and returning -EINVAL for
unrecognized values.
Make also 'tpm_buf_append_name' and 'tpm_buf_fill_hmac_session' fallible so
that errors are detected before causing any spurious TPM traffic.
End also the authorization session on failure in both of the functions, as
the session state would be then by definition corrupted.
Cc: stable@vger.kernel.org # v6.10+
Fixes: 1085b8276b ("tpm: Add the rest of the session HMAC API")
Reviewed-by: Jonathan McDowell <noodles@meta.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 62cd5d480b upstream.
'tpm2_load_cmd' allocates a tempoary blob indirectly via 'tpm2_key_decode'
but it is not freed in the failure paths. Address this by wrapping the blob
into with a cleanup helper.
Cc: stable@vger.kernel.org # v5.13+
Fixes: f221974525 ("security: keys: trusted: use ASN.1 TPM2 key format for the blobs")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 738c9738e6 ]
In ima_match_rules(), if ima_filter_rule_match() returns -ENOENT due to
the rule being NULL, the function incorrectly skips the 'if (!rc)' check
and sets 'result = true'. The LSM rule is considered a match, causing
extra files to be measured by IMA.
This issue can be reproduced in the following scenario:
After unloading the SELinux policy module via 'semodule -d', if an IMA
measurement is triggered before ima_lsm_rules is updated,
in ima_match_rules(), the first call to ima_filter_rule_match() returns
-ESTALE. This causes the code to enter the 'if (rc == -ESTALE &&
!rule_reinitialized)' block, perform ima_lsm_copy_rule() and retry. In
ima_lsm_copy_rule(), since the SELinux module has been removed, the rule
becomes NULL, and the second call to ima_filter_rule_match() returns
-ENOENT. This bypasses the 'if (!rc)' check and results in a false match.
Call trace:
selinux_audit_rule_match+0x310/0x3b8
security_audit_rule_match+0x60/0xa0
ima_match_rules+0x2e4/0x4a0
ima_match_policy+0x9c/0x1e8
ima_get_action+0x48/0x60
process_measurement+0xf8/0xa98
ima_bprm_check+0x98/0xd8
security_bprm_check+0x5c/0x78
search_binary_handler+0x6c/0x318
exec_binprm+0x58/0x1b8
bprm_execve+0xb8/0x130
do_execveat_common.isra.0+0x1a8/0x258
__arm64_sys_execve+0x48/0x68
invoke_syscall+0x50/0x128
el0_svc_common.constprop.0+0xc8/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x44/0x200
el0t_64_sync_handler+0x100/0x130
el0t_64_sync+0x3c8/0x3d0
Fix this by changing 'if (!rc)' to 'if (rc <= 0)' to ensure that error
codes like -ENOENT do not bypass the check and accidentally result in a
successful match.
Fixes: 4af4662fa4 ("integrity: IMA policy")
Signed-off-by: Zhao Yipeng <zhaoyipeng5@huawei.com>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 674e2b2479 ]
This command:
# echo foo/bar >/proc/$$/attr/smack/current
gives the task a label 'foo' w/o indication
that label does not match input.
Setting the label with lsm_set_self_attr() syscall
behaves identically.
This occures because:
1) smk_parse_smack() is used to convert input to a label
2) smk_parse_smack() takes only that part from the
beginning of the input that looks like a label.
3) `/' is prohibited in labels, so only "foo" is taken.
(2) is by design, because smk_parse_smack() is used
for parsing strings which are more than just a label.
Silent failure is not a good thing, and there are two
indicators that this was not done intentionally:
(size >= SMK_LONGLABEL) ~> invalid
clause at the beginning of the do_setattr() and the
"Returns the length of the smack label" claim
in the do_setattr() description.
So I fixed this by adding one tiny check:
the taken label length == input length.
Since input length is now strictly controlled,
I changed the two ways of setting label
smack_setselfattr(): lsm_set_self_attr() syscall
smack_setprocattr(): > /proc/.../current
to accommodate the divergence in
what they understand by "input length":
smack_setselfattr counts mandatory \0 into input length,
smack_setprocattr does not.
smack_setprocattr allows various trailers after label
Related changes:
* fixed description for smk_parse_smack
* allow unprivileged tasks validate label syntax.
* extract smk_parse_label_len() from smk_parse_smack()
so parsing may be done w/o string allocation.
* extract smk_import_valid_label() from smk_import_entry()
to avoid repeated parsing.
* smk_parse_smack(): scan null-terminated strings
for no more than SMK_LONGLABEL(256) characters
* smack_setselfattr(): require struct lsm_ctx . flags == 0
to reserve them for future.
Fixes: e114e47377 ("Smack: Simplified Mandatory Access Control Kernel")
Signed-off-by: Konstantin Andreev <andreev@swemel.ru>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c147e13ea7 ]
If an unprivileged task is allowed to relabel itself
(/smack/relabel-self is not empty),
it can freely create new labels by writing their
names into own /proc/PID/attr/smack/current
This occurs because do_setattr() imports
the provided label in advance,
before checking "relabel-self" list.
This change ensures that the "relabel-self" list
is checked before importing the label.
Fixes: 38416e5393 ("Smack: limited capability for changing process label")
Signed-off-by: Konstantin Andreev <andreev@swemel.ru>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 78fc6a94be ]
According to [1], the label of a UNIX domain socket (UDS)
file (i.e., the filesystem object representing the socket)
is not supposed to participate in Smack security.
To achieve this, [1] labels UDS files with "*"
in smack_d_instantiate().
Before [2], smack_d_instantiate() was responsible
for initializing Smack security for all inodes,
except ones under /proc
[2] imposed the sole responsibility for initializing
inode security for newly created filesystem objects
on smack_inode_init_security().
However, smack_inode_init_security() lacks some logic
present in smack_d_instantiate().
In particular, it does not label UDS files with "*".
This patch adds the missing labeling of UDS files
with "*" to smack_inode_init_security().
Labeling UDS files with "*" in smack_d_instantiate()
still works for stale UDS files that already exist on
disk. Stale UDS files are useless, but I keep labeling
them for consistency and maybe to make easier for user
to delete them.
Compared to [1], this version introduces the following
improvements:
* UDS file label is held inside inode only
and not saved to xattrs.
* relabeling UDS files (setxattr, removexattr, etc.)
is blocked.
[1] 2010-11-24 Casey Schaufler
commit b4e0d5f079 ("Smack: UDS revision")
[2] 2023-11-16 roberto.sassu
Fixes: e63d86b8b7 ("smack: Initialize the in-memory inode in smack_inode_init_security()")
Link: https://lore.kernel.org/linux-security-module/20231116090125.187209-5-roberto.sassu@huaweicloud.com/
Signed-off-by: Konstantin Andreev <andreev@swemel.ru>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 69204f6cdb ]
If memory allocation for the SMACK64TRANSMUTE
xattr value fails in smack_inode_init_security(),
the SMK_INODE_INSTANT flag is not set in
(struct inode_smack *issp)->smk_flags,
leaving the inode as not "instantiated".
It does not matter if fs frees the inode
after failed smack_inode_init_security() call,
but there is no guarantee for this.
To be safe, mark the inode as "instantiated",
even if allocation of xattr values fails.
Signed-off-by: Konstantin Andreev <andreev@swemel.ru>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Stable-dep-of: 78fc6a94be ("smack: fix bug: invalid label of unix socket file")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 195da3ff24 ]
When a new file system object is created
and the conditions for label transmutation are met,
the SMACK64TRANSMUTE extended attribute is set
on the object regardless of its type:
file, pipe, socket, symlink, or directory.
However,
SMACK64TRANSMUTE may only be set on directories.
This bug is a combined effect of the commits [1] and [2]
which both transfer functionality
from smack_d_instantiate() to smack_inode_init_security(),
but only in part.
Commit [1] set blank SMACK64TRANSMUTE on improper object types.
Commit [2] set "TRUE" SMACK64TRANSMUTE on improper object types.
[1] 2023-06-10,
Fixes: baed456a6a ("smack: Set the SMACK64TRANSMUTE xattr in smack_inode_init_security()")
Link: https://lore.kernel.org/linux-security-module/20230610075738.3273764-3-roberto.sassu@huaweicloud.com/
[2] 2023-11-16,
Fixes: e63d86b8b7 ("smack: Initialize the in-memory inode in smack_inode_init_security()")
Link: https://lore.kernel.org/linux-security-module/20231116090125.187209-5-roberto.sassu@huaweicloud.com/
Signed-off-by: Konstantin Andreev <andreev@swemel.ru>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Stable-dep-of: 78fc6a94be ("smack: fix bug: invalid label of unix socket file")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88b4cbcf6b ]
Currently when both IMA and EVM are in fix mode, the IMA signature will
be reset to IMA hash if a program first stores IMA signature in
security.ima and then writes/removes some other security xattr for the
file.
For example, on Fedora, after booting the kernel with "ima_appraise=fix
evm=fix ima_policy=appraise_tcb" and installing rpm-plugin-ima,
installing/reinstalling a package will not make good reference IMA
signature generated. Instead IMA hash is generated,
# getfattr -m - -d -e hex /usr/bin/bash
# file: usr/bin/bash
security.ima=0x0404...
This happens because when setting security.selinux, the IMA_DIGSIG flag
that had been set early was cleared. As a result, IMA hash is generated
when the file is closed.
Similarly, IMA signature can be cleared on file close after removing
security xattr like security.evm or setting/removing ACL.
Prevent replacing the IMA file signature with a file hash, by preventing
the IMA_DIGSIG flag from being reset.
Here's a minimal C reproducer which sets security.selinux as the last
step which can also replaced by removing security.evm or setting ACL,
#include <stdio.h>
#include <sys/xattr.h>
#include <fcntl.h>
#include <unistd.h>
#include <string.h>
#include <stdlib.h>
int main() {
const char* file_path = "/usr/sbin/test_binary";
const char* hex_string = "030204d33204490066306402304";
int length = strlen(hex_string);
char* ima_attr_value;
int fd;
fd = open(file_path, O_WRONLY|O_CREAT|O_EXCL, 0644);
if (fd == -1) {
perror("Error opening file");
return 1;
}
ima_attr_value = (char*)malloc(length / 2 );
for (int i = 0, j = 0; i < length; i += 2, j++) {
sscanf(hex_string + i, "%2hhx", &ima_attr_value[j]);
}
if (fsetxattr(fd, "security.ima", ima_attr_value, length/2, 0) == -1) {
perror("Error setting extended attribute");
close(fd);
return 1;
}
const char* selinux_value= "system_u:object_r:bin_t:s0";
if (fsetxattr(fd, "security.selinux", selinux_value, strlen(selinux_value), 0) == -1) {
perror("Error setting extended attribute");
close(fd);
return 1;
}
close(fd);
return 0;
}
Signed-off-by: Coiby Xu <coxu@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit eed0e3d305 upstream.
To prevent timing attacks, HMAC value comparison needs to be constant
time. Replace the memcmp() with the correct function, crypto_memneq().
[For the Fixes commit I used the commit that introduced the memcmp().
It predates the introduction of crypto_memneq(), but it was still a bug
at the time even though a helper function didn't exist yet.]
Fixes: d00a1c72f7 ("keys: add new trusted key-type")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 54d94c422f ]
When CONFIG_SECURITY is not set, CONFIG_LSM (builtin_lsm_order) does
not need to be visible and settable since builtin_lsm_order is defined in
security.o, which is only built when CONFIG_SECURITY=y.
So make CONFIG_LSM depend on CONFIG_SECURITY.
Fixes: 13e735c0e9 ("LSM: Introduce CONFIG_LSM")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
[PM: subj tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c567de2c4f upstream.
The dfa blob stream for the aa_dfa_unpack() function is expected to be aligned
on a 8 byte boundary.
The static nulldfa_src[] and stacksplitdfa_src[] arrays store the initial
apparmor dfa blob streams, but since they are declared as an array-of-chars
the compiler and linker will only ensure a "char" (1-byte) alignment.
Add an __aligned(8) annotation to the arrays to tell the linker to always
align them on a 8-byte boundary. This avoids runtime warnings at startup on
alignment-sensitive platforms like parisc such as:
Kernel: unaligned access to 0x7f2a584a in aa_dfa_unpack+0x124/0x788 (iir 0xca0109f)
Kernel: unaligned access to 0x7f2a584e in aa_dfa_unpack+0x210/0x788 (iir 0xca8109c)
Kernel: unaligned access to 0x7f2a586a in aa_dfa_unpack+0x278/0x788 (iir 0xcb01090)
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Fixes: 98b824ff89 ("apparmor: refcount the pdb")
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a9eb185be8 ]
x_table_lookup currently does stacking during label_parse() if the
target specifies a stack but its only caller ensures that it will
never be used with stacking.
Refactor to slightly simplify the code in x_to_label(), this
also fixes a long standing problem where x_to_labels check on stacking
is only on the first element to the table option list, instead of
the element that is found and used.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5bf96d20f ]
When using AppArmor profiles inside an unprivileged container,
the link operation observes an unshifted ouid.
(tested with LXD and Incus)
For example, root inside container and uid 1000000 outside, with
`owner /root/link l,` profile entry for ln:
/root$ touch chain && ln chain link
==> dmesg
apparmor="DENIED" operation="link" class="file"
namespace="root//lxd-feet_<var-snap-lxd-common-lxd>" profile="linkit"
name="/root/link" pid=1655 comm="ln" requested_mask="l" denied_mask="l"
fsuid=1000000 ouid=0 [<== should be 1000000] target="/root/chain"
Fix by mapping inode uid of old_dentry in aa_path_link() rather than
using it directly, similarly to how it's mapped in __file_path_perm()
later in the file.
Signed-off-by: Gabriel Totev <gabriel.totev@zetier.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27cd1bf124 ]
incidentally, securityfs_recursive_remove() is broken without that -
it leaks dentries, since simple_recursive_removal() does not expect
anything of that sort. It could be worked around by dput() in
remove_one() callback, but it's easier to just drop that double-get
stuff.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c68804199d ]
The testcase triggers some unnecessary unaligned memory accesses on the
parisc architecture:
Kernel: unaligned access to 0x12f28e27 in policy_unpack_test_init+0x180/0x374 (iir 0x0cdc1280)
Kernel: unaligned access to 0x12f28e67 in policy_unpack_test_init+0x270/0x374 (iir 0x64dc00ce)
Use the existing helper functions put_unaligned_le32() and
put_unaligned_le16() to avoid such warnings on architectures which
prefer aligned memory accesses.
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: 98c0cc48e2 ("apparmor: fix policy_unpack_test on big endian systems")
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a88db916b8 ]
Conflicting attachment resolution is based on the number of states
traversed to reach an accepting state in the attachment DFA, accounting
for DFA loops traversed during the matching process. However, the loop
counting logic had multiple bugs:
- The inc_wb_pos macro increments both position and length, but length
is supposed to saturate upon hitting buffer capacity, instead of
wrapping around.
- If no revisited state is found when traversing the history, is_loop
would still return true, as if there was a loop found the length of
the history buffer, instead of returning false and signalling that
no loop was found. As a result, the adjustment step of
aa_dfa_leftmatch would sometimes produce negative counts with loop-
free DFAs that traversed enough states.
- The iteration in the is_loop for loop is supposed to stop before
i = wb->len, so the conditional should be < instead of <=.
This patch fixes the above bugs as well as the following nits:
- The count and size fields in struct match_workbuf were not used,
so they can be removed.
- The history buffer in match_workbuf semantically stores aa_state_t
and not unsigned ints, even if aa_state_t is currently unsigned int.
- The local variables in is_loop are counters, and thus should be
unsigned ints instead of aa_state_t's.
Fixes: 21f6066105 ("apparmor: improve overlapping domain attachment resolution")
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Co-developed-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
