[ Upstream commit f18e502db6 ]
The IMA log is currently copied to the new kernel during kexec 'load'
using ima_dump_measurement_list(). However, the log copied at kexec
'load' may result in loss of IMA measurements that only occurred after
kexec "load'. Setup the needed infrastructure to move the IMA log copy
from kexec 'load' to 'execute'.
Define a new IMA hook ima_update_kexec_buffer() as a stub function.
It will be used to call ima_dump_measurement_list() during kexec 'execute'.
Implement ima_kexec_post_load() function to be invoked after the new
Kernel image has been loaded for kexec. ima_kexec_post_load() maps the
IMA buffer to a segment in the newly loaded Kernel. It also registers
the reboot notifier_block to trigger ima_update_kexec_buffer() at
kexec 'execute'.
Set the priority of register_reboot_notifier to INT_MIN to ensure that the
IMA log copy operation will happen at the end of the operation chain, so
that all the IMA measurement records extended into the TPM are copied
Co-developed-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Signed-off-by: Steven Chen <chenste@linux.microsoft.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com> # ppc64/kvm
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Stable-dep-of: 10d1c75ed4 ("ima: verify the previous kernel's IMA buffer lies in addressable RAM")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c95e1acb6d ]
In the current implementation, the ima_dump_measurement_list() API is
called during the kexec "load" phase, where a buffer is allocated and
the measurement records are copied. Due to this, new events added after
kexec load but before kexec execute are not carried over to the new kernel
during kexec operation
Carrying the IMA measurement list across kexec requires allocating a
buffer and copying the measurement records. Separate allocating the
buffer and copying the measurement records into separate functions in
order to allocate the buffer at kexec 'load' and copy the measurements
at kexec 'execute'.
After moving the vfree() here at this stage in the patch set, the IMA
measurement list fails to verify when doing two consecutive "kexec -s -l"
with/without a "kexec -s -u" in between. Only after "ima: kexec: move
IMA log copy from kexec load to execute" the IMA measurement list verifies
properly with the vfree() here.
Co-developed-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Steven Chen <chenste@linux.microsoft.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com> # ppc64/kvm
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Stable-dep-of: 10d1c75ed4 ("ima: verify the previous kernel's IMA buffer lies in addressable RAM")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cb5052282c ]
Before making the function local seq_file "file" variable file static
global, rename it to "ima_kexec_file".
Signed-off-by: Steven Chen <chenste@linux.microsoft.com>
Acked-by: Baoquan He <bhe@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com> # ppc64/kvm
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Stable-dep-of: 10d1c75ed4 ("ima: verify the previous kernel's IMA buffer lies in addressable RAM")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 68af44a719 ]
The ima_measurements list is append-only and doesn't require
rcu_read_lock() protection. However, lockdep issues a warning when
traversing RCU lists without the read lock:
security/integrity/ima/ima_kexec.c:40 RCU-list traversed in non-reader section!!
Fix this by using the variant of list_for_each_entry_rcu() with the last
argument set to true. This tells the RCU subsystem that traversing this
append-only list without the read lock is intentional and safe.
This change silences the lockdep warning while maintaining the correct
semantics for the append-only list traversal.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Stable-dep-of: 10d1c75ed4 ("ima: verify the previous kernel's IMA buffer lies in addressable RAM")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0496fc9cdc ]
Commit 8e5d9f916a ("smack: deduplicate xattr setting in
smack_inode_init_security()") introduced xattr_dupval() to simplify setting
the xattrs to be provided by the SMACK LSM on inode creation, in the
smack_inode_init_security().
Unfortunately, moving lsm_get_xattr_slot() caused the SMACK64TRANSMUTE
xattr be added in the array of new xattrs before SMACK64. This causes the
HMAC of xattrs calculated by evm_init_hmac() for new files to diverge from
the one calculated by both evm_calc_hmac_or_hash() and evmctl.
evm_init_hmac() calculates the HMAC of the xattrs of new files based on the
order LSMs provide them, while evm_calc_hmac_or_hash() and evmctl calculate
the HMAC based on an ordered xattrs list.
Fix the issue by making evm_init_hmac() calculate the HMAC of new files
based on the ordered xattrs list too.
Fixes: 8e5d9f916a ("smack: deduplicate xattr setting in smack_inode_init_security()")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 738c9738e6 ]
In ima_match_rules(), if ima_filter_rule_match() returns -ENOENT due to
the rule being NULL, the function incorrectly skips the 'if (!rc)' check
and sets 'result = true'. The LSM rule is considered a match, causing
extra files to be measured by IMA.
This issue can be reproduced in the following scenario:
After unloading the SELinux policy module via 'semodule -d', if an IMA
measurement is triggered before ima_lsm_rules is updated,
in ima_match_rules(), the first call to ima_filter_rule_match() returns
-ESTALE. This causes the code to enter the 'if (rc == -ESTALE &&
!rule_reinitialized)' block, perform ima_lsm_copy_rule() and retry. In
ima_lsm_copy_rule(), since the SELinux module has been removed, the rule
becomes NULL, and the second call to ima_filter_rule_match() returns
-ENOENT. This bypasses the 'if (!rc)' check and results in a false match.
Call trace:
selinux_audit_rule_match+0x310/0x3b8
security_audit_rule_match+0x60/0xa0
ima_match_rules+0x2e4/0x4a0
ima_match_policy+0x9c/0x1e8
ima_get_action+0x48/0x60
process_measurement+0xf8/0xa98
ima_bprm_check+0x98/0xd8
security_bprm_check+0x5c/0x78
search_binary_handler+0x6c/0x318
exec_binprm+0x58/0x1b8
bprm_execve+0xb8/0x130
do_execveat_common.isra.0+0x1a8/0x258
__arm64_sys_execve+0x48/0x68
invoke_syscall+0x50/0x128
el0_svc_common.constprop.0+0xc8/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x44/0x200
el0t_64_sync_handler+0x100/0x130
el0t_64_sync+0x3c8/0x3d0
Fix this by changing 'if (!rc)' to 'if (rc <= 0)' to ensure that error
codes like -ENOENT do not bypass the check and accidentally result in a
successful match.
Fixes: 4af4662fa4 ("integrity: IMA policy")
Signed-off-by: Zhao Yipeng <zhaoyipeng5@huawei.com>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88b4cbcf6b ]
Currently when both IMA and EVM are in fix mode, the IMA signature will
be reset to IMA hash if a program first stores IMA signature in
security.ima and then writes/removes some other security xattr for the
file.
For example, on Fedora, after booting the kernel with "ima_appraise=fix
evm=fix ima_policy=appraise_tcb" and installing rpm-plugin-ima,
installing/reinstalling a package will not make good reference IMA
signature generated. Instead IMA hash is generated,
# getfattr -m - -d -e hex /usr/bin/bash
# file: usr/bin/bash
security.ima=0x0404...
This happens because when setting security.selinux, the IMA_DIGSIG flag
that had been set early was cleared. As a result, IMA hash is generated
when the file is closed.
Similarly, IMA signature can be cleared on file close after removing
security xattr like security.evm or setting/removing ACL.
Prevent replacing the IMA file signature with a file hash, by preventing
the IMA_DIGSIG flag from being reset.
Here's a minimal C reproducer which sets security.selinux as the last
step which can also replaced by removing security.evm or setting ACL,
#include <stdio.h>
#include <sys/xattr.h>
#include <fcntl.h>
#include <unistd.h>
#include <string.h>
#include <stdlib.h>
int main() {
const char* file_path = "/usr/sbin/test_binary";
const char* hex_string = "030204d33204490066306402304";
int length = strlen(hex_string);
char* ima_attr_value;
int fd;
fd = open(file_path, O_WRONLY|O_CREAT|O_EXCL, 0644);
if (fd == -1) {
perror("Error opening file");
return 1;
}
ima_attr_value = (char*)malloc(length / 2 );
for (int i = 0, j = 0; i < length; i += 2, j++) {
sscanf(hex_string + i, "%2hhx", &ima_attr_value[j]);
}
if (fsetxattr(fd, "security.ima", ima_attr_value, length/2, 0) == -1) {
perror("Error setting extended attribute");
close(fd);
return 1;
}
const char* selinux_value= "system_u:object_r:bin_t:s0";
if (fsetxattr(fd, "security.selinux", selinux_value, strlen(selinux_value), 0) == -1) {
perror("Error setting extended attribute");
close(fd);
return 1;
}
close(fd);
return 0;
}
Signed-off-by: Coiby Xu <coxu@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 30d68cb0c3 ]
On IMA policy update, if a measure rule exists in the policy,
IMA_MEASURE is set for ima_policy_flags which makes the violation_check
variable always true. Coupled with a no-action on MAY_READ for a
FILE_CHECK call, we're always taking the inode_lock().
This becomes a performance problem for extremely heavy read-only workloads.
Therefore, prevent this only in the case there's no action to be taken.
Signed-off-by: Frederick Lawler <fred@cloudflare.com>
Acked-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a414016218 upstream.
Each time a file in policy, that is already opened for read, is opened
for write, a Time-of-Measure-Time-of-Use (ToMToU) integrity violation
audit message is emitted and a violation record is added to the IMA
measurement list. This occurs even if a ToMToU violation has already
been recorded.
Limit the number of ToMToU integrity violations per file open for read.
Note: The IMA_MAY_EMIT_TOMTOU atomic flag must be set from the reader
side based on policy. This may result in a per file open for read
ToMToU violation.
Since IMA_MUST_MEASURE is only used for violations, rename the atomic
IMA_MUST_MEASURE flag to IMA_MAY_EMIT_TOMTOU.
Cc: stable@vger.kernel.org # applies cleanly up to linux-6.6
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Tested-by: Petr Vorel <pvorel@suse.cz>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5b3cd80115 upstream.
Each time a file in policy, that is already opened for write, is opened
for read, an open-writers integrity violation audit message is emitted
and a violation record is added to the IMA measurement list. This
occurs even if an open-writers violation has already been recorded.
Limit the number of open-writers integrity violations for an existing
file open for write to one. After the existing file open for write
closes (__fput), subsequent open-writers integrity violations may be
emitted.
Cc: stable@vger.kernel.org # applies cleanly up to linux-6.6
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Tested-by: Petr Vorel <pvorel@suse.cz>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 57a0ef02fe upstream.
Commit 0d73a55208 ("ima: re-introduce own integrity cache lock")
mistakenly reverted the performance improvement introduced in commit
42a4c60319 ("ima: fix ima_inode_post_setattr"). The unused bit mask was
subsequently removed by commit 11c60f23ed ("integrity: Remove unused
macro IMA_ACTION_RULE_FLAGS").
Restore the performance improvement by introducing the new mask
IMA_NONACTION_RULE_FLAGS, equal to IMA_NONACTION_FLAGS without
IMA_NEW_FILE, which is not a rule-specific flag.
Finally, reset IMA_NONACTION_RULE_FLAGS instead of IMA_NONACTION_FLAGS in
process_measurement(), if the IMA_CHANGE_ATTR atomic flag is set (after
file metadata modification).
With this patch, new files for which metadata were modified while they are
still open, can be reopened before the last file close (when security.ima
is written), since the IMA_NEW_FILE flag is not cleared anymore. Otherwise,
appraisal fails because security.ima is missing (files with IMA_NEW_FILE
set are an exception).
Cc: stable@vger.kernel.org # v4.16.x
Fixes: 0d73a55208 ("ima: re-introduce own integrity cache lock")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 38aa3f5ac6 ("integrity: Avoid -Wflex-array-member-not-at-end
warnings") introduced tagged `struct evm_ima_xattr_data_hdr` and
`struct ima_digest_data_hdr`. We want to ensure that when new members
need to be added to the flexible structures, they are always included
within these tagged structs.
So, we use `static_assert()` to ensure that the memory layout for
both the flexible structure and the tagged struct is the same after
any changes.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Tested-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The EVM_NEW_FILE flag is unset if the file already existed at the time
of open and this can be checked without looking at i_writecount.
Not accessing it reduces traffic on the cacheline during parallel open
of the same file and drop the evm_file_release routine from second place
to bottom of the profile.
Fixes: 75a323e604 ("evm: Make it independent from 'integrity' LSM")
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Cc: stable@vger.kernel.org # 6.9+
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Function ima_eventdigest_init() calls ima_eventdigest_init_common()
with HASH_ALGO__LAST which is then used to access the array
hash_digest_size[] leading to buffer overrun. Have a conditional
statement to handle this.
Fixes: 9fab303a2c ("ima: fix violation measurement list record")
Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com>
Tested-by: Enrico Bravi (PhD at polito.it) <enrico.bravi@huawei.com>
Cc: stable@vger.kernel.org # 5.19+
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Pull 'struct fd' updates from Al Viro:
"Just the 'struct fd' layout change, with conversion to accessor
helpers"
* tag 'pull-stable-struct_fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
add struct fd constructors, get rid of __to_fd()
struct fd: representation change
introduce fd_file(), convert all accessors to it.
For any changes of struct fd representation we need to
turn existing accesses to fields into calls of wrappers.
Accesses to struct fd::flags are very few (3 in linux/file.h,
1 in net/socket.c, 3 in fs/overlayfs/file.c and 3 more in
explicit initializers).
Those can be dealt with in the commit converting to
new layout; accesses to struct fd::file are too many for that.
This commit converts (almost) all of f.file to
fd_file(f). It's not entirely mechanical ('file' is used as
a member name more than just in struct fd) and it does not
even attempt to distinguish the uses in pointer context from
those in boolean context; the latter will be eventually turned
into a separate helper (fd_empty()).
NOTE: mass conversion to fd_empty(), tempting as it
might be, is a bad idea; better do that piecewise in commit
that convert from fdget...() to CLASS(...).
[conflicts in fs/fhandle.c, kernel/bpf/syscall.c, mm/memcontrol.c
caught by git; fs/stat.c one got caught by git grep]
[fs/xattr.c conflict]
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The LSM framework has an existing inode_free_security() hook which
is used by LSMs that manage state associated with an inode, but
due to the use of RCU to protect the inode, special care must be
taken to ensure that the LSMs do not fully release the inode state
until it is safe from a RCU perspective.
This patch implements a new inode_free_security_rcu() implementation
hook which is called when it is safe to free the LSM's internal inode
state. Unfortunately, this new hook does not have access to the inode
itself as it may already be released, so the existing
inode_free_security() hook is retained for those LSMs which require
access to the inode.
Cc: stable@vger.kernel.org
Reported-by: syzbot+5446fbf332b0602ede0b@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/00000000000076ba3b0617f65cc8@google.com
Signed-off-by: Paul Moore <paul@paul-moore.com>
To be consistent with most LSM hooks, convert the return value of
hook inode_copy_up_xattr to 0 or a negative error code.
Before:
- Hook inode_copy_up_xattr returns 0 when accepting xattr, 1 when
discarding xattr, -EOPNOTSUPP if it does not know xattr, or any
other negative error code otherwise.
After:
- Hook inode_copy_up_xattr returns 0 when accepting xattr, *-ECANCELED*
when discarding xattr, -EOPNOTSUPP if it does not know xattr, or
any other negative error code otherwise.
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Pull crypto update from Herbert Xu:
"API:
- Test setkey in no-SIMD context
- Add skcipher speed test for user-specified algorithm
Algorithms:
- Add x25519 support on ppc64le
- Add VAES and AVX512 / AVX10 optimized AES-GCM on x86
- Remove sm2 algorithm
Drivers:
- Add Allwinner H616 support to sun8i-ce
- Use DMA in stm32
- Add Exynos850 hwrng support to exynos"
* tag 'v6.11-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (81 commits)
hwrng: core - remove (un)register_miscdev()
crypto: lib/mpi - delete unnecessary condition
crypto: testmgr - generate power-of-2 lengths more often
crypto: mxs-dcp - Ensure payload is zero when using key slot
hwrng: Kconfig - Do not enable by default CN10K driver
crypto: starfive - Fix nent assignment in rsa dec
crypto: starfive - Align rsa input data to 32-bit
crypto: qat - fix unintentional re-enabling of error interrupts
crypto: qat - extend scope of lock in adf_cfg_add_key_value_param()
Documentation: qat: fix auto_reset attribute details
crypto: sun8i-ce - add Allwinner H616 support
crypto: sun8i-ce - wrap accesses to descriptor address fields
dt-bindings: crypto: sun8i-ce: Add compatible for H616
hwrng: core - Fix wrong quality calculation at hw rng registration
hwrng: exynos - Enable Exynos850 support
hwrng: exynos - Add SMC based TRNG operation
hwrng: exynos - Implement bus clock control
hwrng: exynos - Use devm_clk_get_enabled() to get the clock
hwrng: exynos - Improve coding style
dt-bindings: rng: Add Exynos850 support to exynos-trng
...
Pull integrity fix from Mimi Zohar:
"A single bug fix to properly remove all of the securityfs IMA
measurement lists"
* tag 'integrity-v6.10-fix' of ssh://ra.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: fix wrong zero-assignment during securityfs dentry remove
The SM2 algorithm has a single user in the kernel. However, it's
never been integrated properly with that user: asymmetric_keys.
The crux of the issue is that the way it computes its digest with
sm3 does not fit into the architecture of asymmetric_keys. As no
solution has been proposed, remove this algorithm.
It can be resubmitted when it is integrated properly into the
asymmetric_keys subsystem.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In case of error during ima_fs_init() all the dentry already created
are removed. {ascii, binary}_securityfs_measurement_lists are freed
calling for each array the remove_securityfs_measurement_lists(). This
function, at the end, assigns to zero the securityfs_measurement_list_count.
This causes during the second call of remove_securityfs_measurement_lists()
to leave the dentry of the array pending, not removing them correctly,
because the securityfs_measurement_list_count is already zero.
Move the securityfs_measurement_list_count = 0 after the two
remove_securityfs_measurement_lists() calls to correctly remove all the
dentry already allocated.
Fixes: 9fa8e76250 ("ima: add crypto agility support for template-hash algorithm")
Signed-off-by: Enrico Bravi <enrico.bravi@polito.it>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The template hash showed by the ascii_runtime_measurements and
binary_runtime_measurements is the one calculated using sha1 and there is
no possibility to change this value, despite the fact that the template
hash is calculated using the hash algorithms corresponding to all the PCR
banks configured in the TPM.
Add the support to retrieve the ima log with the template data hash
calculated with a specific hash algorithm.
Add a new file in the securityfs ima directory for each hash algo
configured in a PCR bank of the TPM. Each new file has the name with
the following structure:
{binary, ascii}_runtime_measurements_<hash_algo_name>
Legacy files are kept, to avoid breaking existing applications, but as
symbolic links which point to {binary, ascii}_runtime_measurements_sha1
files. These two files are created even if a TPM chip is not detected or
the sha1 bank is not configured in the TPM.
As example, in the case a TPM chip is present and sha256 is the only
configured PCR bank, the listing of the securityfs ima directory is the
following:
lr--r--r-- [...] ascii_runtime_measurements -> ascii_runtime_measurements_sha1
-r--r----- [...] ascii_runtime_measurements_sha1
-r--r----- [...] ascii_runtime_measurements_sha256
lr--r--r-- [...] binary_runtime_measurements -> binary_runtime_measurements_sha1
-r--r----- [...] binary_runtime_measurements_sha1
-r--r----- [...] binary_runtime_measurements_sha256
--w------- [...] policy
-r--r----- [...] runtime_measurements_count
-r--r----- [...] violations
Signed-off-by: Enrico Bravi <enrico.bravi@polito.it>
Signed-off-by: Silvia Sisinni <silvia.sisinni@polito.it>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Rename is_unsupported_fs to is_unsupported_hmac_fs since now only HMAC is
unsupported.
Co-developed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Now that EVM supports RSA signatures for previously completely
unsupported filesystems rename the flag SB_I_EVM_UNSUPPORTED to
SB_I_EVM_HMAC_UNSUPPORTED to reflect that only HMAC is not supported.
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Suggested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Unsupported filesystems currently do not enforce any signatures. Add
support for signature enforcement of the "original" and "portable &
immutable" signatures when EVM_INIT_X509 is enabled.
The "original" signature type contains filesystem specific metadata.
Thus it cannot be copied up and verified. However with EVM_INIT_X509
and EVM_ALLOW_METADATA_WRITES enabled, the "original" file signature
may be written.
When EVM_ALLOW_METADATA_WRITES is not set or once it is removed from
/sys/kernel/security/evm by setting EVM_INIT_HMAC for example, it is not
possible to write or remove xattrs on the overlay filesystem.
This change still prevents EVM from writing HMAC signatures on
unsupported filesystem when EVM_INIT_HMAC is enabled.
Co-developed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Force a file's integrity to be re-evaluated on file metadata change by
resetting both the IMA and EVM status flags.
Co-developed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
On stacked filesystem the metadata inode may be different than the one
file data inode and therefore changes to it need to be detected
independently. Therefore, store the i_version, device number, and inode
number associated with the file metadata inode.
Implement a function to detect changes to the inode and if a change is
detected reset the evm_status. This function will be called by IMA when
IMA detects that the metadata inode is different from the file's inode.
Co-developed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Move all the variables used for file change detection into a structure
that can be used by IMA and EVM. Implement an inline function for storing
the identification of an inode and one for detecting changes to an inode
based on this new structure.
Co-developed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Changes to file attributes (mode bits, uid, gid) on the lower layer are
not taken into account when d_backing_inode() is used when a file is
accessed on the overlay layer and this file has not yet been copied up.
This is because d_backing_inode() does not return the real inode of the
lower layer but instead returns the backing inode which in this case
holds wrong file attributes. Further, when CONFIG_OVERLAY_FS_METACOPY is
enabled and a copy-up is triggered due to file metadata changes, then
the metadata are held by the backing inode while the data are still held
by the real inode. Therefore, use d_inode(d_real(dentry, D_REAL_METADATA))
to get to the file's metadata inode and use it to calculate the metadata
hash with.
Co-developed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
To support "portable and immutable signatures" on otherwise unsupported
filesystems, determine the EVM signature type by the content of a file's
xattr. If the file has the appropriate signature type then allow it to be
copied up. All other signature types are discarded as before.
"Portable and immutable" EVM signatures can be copied up by stacked file-
system since the metadata their signature covers does not include file-
system-specific data such as a file's inode number, generation, and UUID.
Co-developed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Copying up xattrs is solely based on the security xattr name. For finer
granularity add a dentry parameter to the security_inode_copy_up_xattr
hook definition, allowing decisions to be based on the xattr content as
well.
Co-developed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Paul Moore <paul@paul-moore.com> (LSM,SELinux)
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
-Wflex-array-member-not-at-end is coming in GCC-14, and we are getting
ready to enable it globally.
There is currently an object (`hdr)` in `struct ima_max_digest_data`
that contains a flexible structure (`struct ima_digest_data`):
struct ima_max_digest_data {
struct ima_digest_data hdr;
u8 digest[HASH_MAX_DIGESTSIZE];
} __packed;
So, in order to avoid ending up with a flexible-array member in the
middle of a struct, we use the `__struct_group()` helper to separate
the flexible array from the rest of the members in the flexible
structure:
struct ima_digest_data {
__struct_group(ima_digest_data_hdr, hdr, __packed,
... the rest of the members
);
u8 digest[];
} __packed;
And similarly for `struct evm_ima_xattr_data`.
With the change described above, we can now declare an object of the
type of the tagged `struct ima_digest_data_hdr`, without embedding the
flexible array in the middle of another struct:
struct ima_max_digest_data {
struct ima_digest_data_hdr hdr;
u8 digest[HASH_MAX_DIGESTSIZE];
} __packed;
And similarly for `struct evm_digest` and `struct evm_xattr`.
We also use `container_of()` whenever we need to retrieve a pointer to
the flexible structure.
So, with these changes, fix the following warnings:
security/integrity/evm/evm.h:64:32: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
security/integrity/evm/../integrity.h:40:35: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
security/integrity/evm/../integrity.h:68:32: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
security/integrity/ima/../integrity.h:40:35: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
security/integrity/ima/../integrity.h:68:32: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
security/integrity/integrity.h:40:35: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
security/integrity/integrity.h:68:32: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
security/integrity/platform_certs/../integrity.h:40:35: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
security/integrity/platform_certs/../integrity.h:68:32: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Link: https://github.com/KSPP/linux/issues/202
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The init_module syscall loads an ELF image into kernel space without
measuring the buffer containing the ELF image. To close this kernel
module integrity gap, define a new critical-data record which includes
the hash of the ELF image.
Instead of including the buffer data in the IMA measurement list,
include the hash of the buffer data to avoid large IMA measurement
list records. The buffer data hash would be the same value as the
finit_module syscall file hash.
To enable measuring the init_module buffer and other critical data from
boot, define "ima_policy=critical_data" on the boot command line. Since
builtin policies are not persistent, a custom IMA policy must include
the rule as well: measure func=CRITICAL_DATA label=modules
To verify the template data hash value, first convert the buffer data
hash to binary:
grep "init_module" \
/sys/kernel/security/integrity/ima/ascii_runtime_measurements | \
tail -1 | cut -d' ' -f 6 | xxd -r -p | sha256sum
Reported-by: Ken Goldman <kgold@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
->d_name.name can change on rename and the earlier value can be freed;
there are conditions sufficient to stabilize it (->d_lock on dentry,
->d_lock on its parent, ->i_rwsem exclusive on the parent's inode,
rename_lock), but none of those are met at any of the sites. Take a stable
snapshot of the name instead.
Link: https://lore.kernel.org/all/20240202182732.GE2087318@ZenIV/
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Pull lsm updates from Paul Moore:
- Promote IMA/EVM to a proper LSM
This is the bulk of the diffstat, and the source of all the changes
in the VFS code. Prior to the start of the LSM stacking work it was
important that IMA/EVM were separate from the rest of the LSMs,
complete with their own hooks, infrastructure, etc. as it was the
only way to enable IMA/EVM at the same time as a LSM.
However, now that the bulk of the LSM infrastructure supports
multiple simultaneous LSMs, we can simplify things greatly by
bringing IMA/EVM into the LSM infrastructure as proper LSMs. This is
something I've wanted to see happen for quite some time and Roberto
was kind enough to put in the work to make it happen.
- Use the LSM hook default values to simplify the call_int_hook() macro
Previously the call_int_hook() macro required callers to supply a
default return value, despite a default value being specified when
the LSM hook was defined.
This simplifies the macro by using the defined default return value
which makes life easier for callers and should also reduce the number
of return value bugs in the future (we've had a few pop up recently,
hence this work).
- Use the KMEM_CACHE() macro instead of kmem_cache_create()
The guidance appears to be to use the KMEM_CACHE() macro when
possible and there is no reason why we can't use the macro, so let's
use it.
- Fix a number of comment typos in the LSM hook comment blocks
Not much to say here, we fixed some questionable grammar decisions in
the LSM hook comment blocks.
* tag 'lsm-pr-20240312' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: (28 commits)
cred: Use KMEM_CACHE() instead of kmem_cache_create()
lsm: use default hook return value in call_int_hook()
lsm: fix typos in security/security.c comment headers
integrity: Remove LSM
ima: Make it independent from 'integrity' LSM
evm: Make it independent from 'integrity' LSM
evm: Move to LSM infrastructure
ima: Move IMA-Appraisal to LSM infrastructure
ima: Move to LSM infrastructure
integrity: Move integrity_kernel_module_request() to IMA
security: Introduce key_post_create_or_update hook
security: Introduce inode_post_remove_acl hook
security: Introduce inode_post_set_acl hook
security: Introduce inode_post_create_tmpfile hook
security: Introduce path_post_mknod hook
security: Introduce file_release hook
security: Introduce file_post_open hook
security: Introduce inode_post_removexattr hook
security: Introduce inode_post_setattr hook
security: Align inode_setattr hook definition with EVM
...
Currently when the kernel fails to add a cert to the .machine keyring,
it will throw an error immediately in the function integrity_add_key.
Since the kernel will try adding to the .platform keyring next or throw
an error (in the caller of integrity_add_key i.e. add_to_machine_keyring),
so there is no need to throw an error immediately in integrity_add_key.
Reported-by: itrymybest80@protonmail.com
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2239331
Fixes: d19967764b ("integrity: Introduce a Linux keyring called machine")
Reviewed-by: Eric Snowberg <eric.snowberg@oracle.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Since now IMA and EVM use their own integrity metadata, it is safe to
remove the 'integrity' LSM, with its management of integrity metadata.
Keep the iint.c file only for loading IMA and EVM keys at boot, and for
creating the integrity directory in securityfs (we need to keep it for
retrocompatibility reasons).
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Make the 'ima' LSM independent from the 'integrity' LSM by introducing IMA
own integrity metadata (ima_iint_cache structure, with IMA-specific fields
from the integrity_iint_cache structure), and by managing it directly from
the 'ima' LSM.
Create ima_iint.c and introduce the same integrity metadata management
functions found in iint.c (renamed with ima_). However, instead of putting
metadata in an rbtree, reserve space from IMA in the inode security blob
for a pointer, and introduce the ima_inode_set_iint()/ima_inode_get_iint()
primitives to store/retrieve that pointer. This improves search time from
logarithmic to constant.
Consequently, don't include the inode pointer as field in the
ima_iint_cache structure, since the association with the inode is clear.
Since the inode field is missing in ima_iint_cache, pass the extra inode
parameter to ima_get_verity_digest().
Prefer storing the pointer instead of the entire ima_iint_cache structure,
to avoid too much memory pressure. Use the same mechanism as before, a
cache named ima_iint_cache (renamed from iint_cache), to quickly allocate
a new ima_iint_cache structure when requested by the IMA policy.
Create the new ima_iint_cache in ima_iintcache_init(),
called by init_ima_lsm(), during the initialization of the 'ima' LSM. And,
register ima_inode_free_security() to free the ima_iint_cache structure, if
exists.
Replace integrity_iint_cache with ima_iint_cache in various places of the
IMA code. Also, replace integrity_inode_get() and integrity_iint_find(),
respectively with ima_inode_get() and ima_iint_find().
Finally, move the remaining IMA-specific flags
to security/integrity/ima/ima.h, since they are now unnecessary in the
common integrity layer.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Define a new structure for EVM-specific metadata, called evm_iint_cache,
and embed it in the inode security blob. Introduce evm_iint_inode() to
retrieve metadata, and register evm_inode_alloc_security() for the
inode_alloc_security LSM hook, to initialize the structure (before
splitting metadata, this task was done by iint_init_always()).
Keep the non-NULL checks after calling evm_iint_inode() except in
evm_inode_alloc_security(), to take into account inodes for which
security_inode_alloc() was not called. When using shared metadata,
obtaining a NULL pointer from integrity_iint_find() meant that the file
wasn't in the IMA policy. Now, because IMA and EVM use disjoint metadata,
the EVM status has to be stored for every inode regardless of the IMA
policy.
Given that from now on EVM relies on its own metadata, remove the iint
parameter from evm_verifyxattr(). Also, directly retrieve the iint in
evm_verify_hmac(), called by both evm_verifyxattr() and
evm_verify_current_integrity(), since now there is no performance penalty
in retrieving EVM metadata (constant time).
Replicate the management of the IMA_NEW_FILE flag, by introducing
evm_post_path_mknod() and evm_file_release() to respectively set and clear
the newly introduced flag EVM_NEW_FILE, at the same time IMA does. Like for
IMA, select CONFIG_SECURITY_PATH when EVM is enabled, to ensure that files
are marked as new.
Unlike ima_post_path_mknod(), evm_post_path_mknod() cannot check if a file
must be appraised. Thus, it marks all affected files. Also, it does not
clear EVM_NEW_FILE depending on i_version, but that is not a problem
because IMA_NEW_FILE is always cleared when set in ima_check_last_writer().
Move the EVM-specific flag EVM_IMMUTABLE_DIGSIG to
security/integrity/evm/evm.h, since that definition is now unnecessary in
the common integrity layer.
Finally, switch to the LSM reservation mechanism for the EVM xattr, and
consequently decrement by one the number of xattrs to allocate in
security_inode_init_security().
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
As for IMA, move hardcoded EVM function calls from various places in the
kernel to the LSM infrastructure, by introducing a new LSM named 'evm'
(last and always enabled like 'ima'). The order in the Makefile ensures
that 'evm' hooks are executed after 'ima' ones.
Make EVM functions as static (except for evm_inode_init_security(), which
is exported), and register them as hook implementations in init_evm_lsm().
Also move the inline functions evm_inode_remove_acl(),
evm_inode_post_remove_acl(), and evm_inode_post_set_acl() from the public
evm.h header to evm_main.c.
Unlike before (see commit to move IMA to the LSM infrastructure),
evm_inode_post_setattr(), evm_inode_post_set_acl(),
evm_inode_post_remove_acl(), and evm_inode_post_removexattr() are not
executed for private inodes.
Finally, add the LSM_ID_EVM case in lsm_list_modules_test.c
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
A few additional IMA hooks are needed to reset the cached appraisal
status, causing the file's integrity to be re-evaluated on next access.
Register these IMA-appraisal only functions separately from the rest of IMA
functions, as appraisal is a separate feature not necessarily enabled in
the kernel configuration.
Reuse the same approach as for other IMA functions, move hardcoded calls
from various places in the kernel to the LSM infrastructure. Declare the
functions as static and register them as hook implementations in
init_ima_appraise_lsm(), called by init_ima_lsm().
Also move the inline function ima_inode_remove_acl() from the public ima.h
header to ima_appraise.c.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Move hardcoded IMA function calls (not appraisal-specific functions) from
various places in the kernel to the LSM infrastructure, by introducing a
new LSM named 'ima' (at the end of the LSM list and always enabled like
'integrity').
Having IMA before EVM in the Makefile is sufficient to preserve the
relative order of the new 'ima' LSM in respect to the upcoming 'evm' LSM,
and thus the order of IMA and EVM function calls as when they were
hardcoded.
Make moved functions as static (except ima_post_key_create_or_update(),
which is not in ima_main.c), and register them as implementation of the
respective hooks in the new function init_ima_lsm().
Select CONFIG_SECURITY_PATH, to ensure that the path-based LSM hook
path_post_mknod is always available and ima_post_path_mknod() is always
executed to mark files as new, as before the move.
A slight difference is that IMA and EVM functions registered for the
inode_post_setattr, inode_post_removexattr, path_post_mknod,
inode_post_create_tmpfile, inode_post_set_acl and inode_post_remove_acl
won't be executed for private inodes. Since those inodes are supposed to be
fs-internal, they should not be of interest to IMA or EVM. The S_PRIVATE
flag is used for anonymous inodes, hugetlbfs, reiserfs xattrs, XFS scrub
and kernel-internal tmpfs files.
Conditionally register ima_post_key_create_or_update() if
CONFIG_IMA_MEASURE_ASYMMETRIC_KEYS is enabled. Also, conditionally register
ima_kernel_module_request() if CONFIG_INTEGRITY_ASYMMETRIC_KEYS is enabled.
Finally, add the LSM_ID_IMA case in lsm_list_modules_test.c.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
In preparation for removing the 'integrity' LSM, move
integrity_kernel_module_request() to IMA, and rename it to
ima_kernel_module_request(). Rewrite the function documentation, to explain
better what the problem is.
Compile it conditionally if CONFIG_INTEGRITY_ASYMMETRIC_KEYS is enabled,
and call it from security.c (removed afterwards with the move of IMA to the
LSM infrastructure).
Adding this hook cannot be avoided, since IMA has no control on the flags
passed to crypto_alloc_sig() in public_key_verify_signature(), and thus
cannot pass CRYPTO_NOLOAD, which solved the problem for EVM hashing with
commit e2861fa716 ("evm: Don't deadlock if a crypto algorithm is
unavailable").
EVM alone does not need to implement this hook, first because there is no
mutex to deadlock, and second because even if it had it, there should be a
recursive call. However, since verification from EVM can be initiated only
by setting inode metadata, deadlock would occur if modprobe would do the
same while loading a kernel module (which is unlikely).
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
