[ Upstream commit ce9f6aec0f ]
The test generates VXLAN traffic using mausezahn, where the encapsulated
inner IPv6 packet has an incorrect payload length set in the IPv6 header.
After VXLAN decapsulation, such packets do not pass sanity checks in
br_netfilter and are dropped, which causes the test to fail.
Fix this by setting the correct IPv6 payload length for the encapsulated
packet generated by mausezahn, so that the packet is accepted
by br_netfilter.
tools/testing/selftests/net/forwarding/vxlan_bridge_1d_ipv6.sh
lines 698-706
)"00:03:"$( : Payload length
)"3a:"$( : Next header
)"04:"$( : Hop limit
)"$saddr:"$( : IP saddr
)"$daddr:"$( : IP daddr
)"80:"$( : ICMPv6.type
)"00:"$( : ICMPv6.code
)"00:"$( : ICMPv6.checksum
)
Data after IPv6 header:
• 80: — 1 byte (ICMPv6 type)
• 00: — 1 byte (ICMPv6 code)
• 00: — 1 byte (ICMPv6 checksum, truncated)
Total: 3 bytes → 00:03 is correct. The old value 00:08 did not match
the actual payload size.
Fixes: b07e9957f2 ("selftests: forwarding: Add VxLAN tests with a VLAN-unaware bridge for IPv6")
Signed-off-by: Aleksei Oladko <aleksey.oladko@virtuozzo.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260213131907.43351-3-aleksey.oladko@virtuozzo.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02cb2e6bac ]
The test generates VXLAN traffic using mausezahn, where the encapsulated
inner IPv4 packet contains a zero IP header checksum. After VXLAN
decapsulation, such packets do not pass sanity checks in br_netfilter
and are dropped, which causes the test to fail.
Fix this by calculating and setting a valid IPv4 header checksum for the
encapsulated packet generated by mausezahn, so that the packet is accepted
by br_netfilter. Fixed by using the payload_template_calc_checksum() /
payload_template_expand_checksum() helpers that are only available
in v6.3 and newer kernels.
Fixes: a0b61f3d8e ("selftests: forwarding: vxlan_bridge_1d: Add an ECN decap test")
Signed-off-by: Aleksei Oladko <aleksey.oladko@virtuozzo.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260213131907.43351-2-aleksey.oladko@virtuozzo.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bed22c7b90 ]
ret_set_ksft_status() calls ksft_status_merge() with the current return
status and the last one. It treats a non-zero return code from
ksft_status_merge() as an indication that the return status was
overwritten by the last one and therefore overwrites the return message
with the last one.
Currently, ksft_status_merge() returns a non-zero return code even if
the current return status and the last one are equal. This results in
return messages being overwritten which is counter-productive since we
are more interested in the first failure message and not the last one.
Fix by changing ksft_status_merge() to only return a non-zero return
code if the current return status was actually changed.
Add a test case which checks that the first error message is not
overwritten.
Before:
# ./lib_sh_test.sh
[...]
TEST: RET tfail2 tfail -> fail [FAIL]
retmsg=tfail expected tfail2
[...]
# echo $?
1
After:
# ./lib_sh_test.sh
[...]
TEST: RET tfail2 tfail -> fail [ OK ]
[...]
# echo $?
0
Fixes: 596c8819cb ("selftests: forwarding: Have RET track kselftest framework constants")
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20251116081029.69112-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 57531b3416 ]
It seems that most of the tests prepare the interfaces once before the test
run (setup_prepare()), rely on setup_wait() to wait for link and only then
run the test(s).
local_termination brings the physical interfaces down and up during test
run but never wait for them to come up. If the auto-negotiation takes
some seconds, first test packets are being lost, which leads to
false-negative test results.
Use setup_wait() in run_test() to make sure auto-negotiation has been
completed after all simple_if_init() calls on physical interfaces and test
packets will not be lost because of the race against link establishment.
Fixes: 90b9566aa5 ("selftests: forwarding: add a test for local_termination.sh")
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://patch.msgid.link/20251106161213.459501-1-alexander.sverdlin@siemens.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 50d51cef55 ]
Quoted from musl wiki:
GNU getopt permutes argv to pull options to the front, ahead of
non-option arguments. musl and the POSIX standard getopt stop
processing options at the first non-option argument with no
permutation.
Thus these scripts stop working on musl since non-option arguments for
tools using getopt() (in this case, (ar)ping) do not always come last.
Fix it by reordering arguments.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250919053538.1106753-1-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b219bcfcc9 ]
Many net selftests invent their own logging helpers. These really should be
in a library sourced by these tests. Currently forwarding/lib.sh has a
suite of perfectly fine logging helpers, but sourcing a forwarding/ library
from a higher-level directory smells of layering violation. In this patch,
move the logging helpers to net/lib.sh so that every net test can use them.
Together with the logging helpers, it's also necessary to move
pause_on_fail(), and EXIT_STATUS and RET.
Existing lib.sh users might be using these same names for their functions
or variables. However lib.sh is always sourced near the top of the
file (checked), and whatever new definitions will simply override the ones
provided by lib.sh.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://patch.msgid.link/edd3785a3bd72ffbe1409300989e993ee50ae98b.1731589511.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 47c84997c6 ("selftests: net: lib: fix shift count out of range")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9e9f6d7b7 ]
Attempts to replace an MDB group membership of the host itself are
currently bounced:
# ip link add name br up type bridge vlan_filtering 1
# bridge mdb replace dev br port br grp 239.0.0.1 vid 2
# bridge mdb replace dev br port br grp 239.0.0.1 vid 2
Error: bridge: Group is already joined by host.
A similar operation done on a member port would succeed. Ignore the check
for replacement of host group memberships as well.
The bit of code that this enables is br_multicast_host_join(), which, for
already-joined groups only refreshes the MC group expiration timer, which
is desirable; and a userspace notification, also desirable.
Change a selftest that exercises this code path from expecting a rejection
to expecting a pass. The rest of MDB selftests pass without modification.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/e5c5188b9787ae806609e7ca3aa2a0a501b9b5c4.1738685648.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, the second bridge command overwrites the first one.
Fix this by adding this VID to the interface behind $swp2.
The one_bridge_two_pvids() test intends to check that there is no
leakage of traffic between bridge ports which have a single VLAN - the
PVID VLAN.
Because of a typo, port $swp1 is configured with a PVID twice (second
command overwrites first), and $swp2 isn't configured at all (and since
the bridge vlan_default_pvid property is set to 0, this port will not
have a PVID at all, so it will drop all untagged and priority-tagged
traffic).
So, instead of testing the configuration that was intended, we are
testing a different one, where one port has PVID 2 and the other has
no PVID. This incorrect version of the test should also pass, but is
ineffective for its purpose, so fix the typo.
This typo has an impact on results of the test,
potentially leading to wrong conclusions regarding
the functionality of a network device.
The tests results:
TEST: Switch ports in VLAN-aware bridge with different PVIDs:
Unicast non-IP untagged [ OK ]
Multicast non-IP untagged [ OK ]
Broadcast non-IP untagged [ OK ]
Unicast IPv4 untagged [ OK ]
Multicast IPv4 untagged [ OK ]
Unicast IPv6 untagged [ OK ]
Multicast IPv6 untagged [ OK ]
Unicast non-IP VID 1 [ OK ]
Multicast non-IP VID 1 [ OK ]
Broadcast non-IP VID 1 [ OK ]
Unicast IPv4 VID 1 [ OK ]
Multicast IPv4 VID 1 [ OK ]
Unicast IPv6 VID 1 [ OK ]
Multicast IPv6 VID 1 [ OK ]
Unicast non-IP VID 4094 [ OK ]
Multicast non-IP VID 4094 [ OK ]
Broadcast non-IP VID 4094 [ OK ]
Unicast IPv4 VID 4094 [ OK ]
Multicast IPv4 VID 4094 [ OK ]
Unicast IPv6 VID 4094 [ OK ]
Multicast IPv6 VID 4094 [ OK ]
Fixes: 476a4f05d9 ("selftests: forwarding: add a no_forwarding.sh test")
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Kacper Ludwinski <kac.ludwinski@icloud.com>
Link: https://patch.msgid.link/20241002051016.849-1-kac.ludwinski@icloud.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
"Interface can't change network namespaces" is rather an attribute,
not a feature, and it can't be changed via Ethtool.
Make it a "cold" private flag instead of a netdev_feature and free
one more bit.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add new test checking the correctness of inner vlan flushing to the skb
data when outer vlan tag is added through act_vlan on egress.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add new test checking the correctness of inner vlan flushing to the skb
data when outer vlan tag is added through act_vlan on ingress.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Looking at timestamped output of netdev CI reveals that
most of the time in forwarding tests for custom route
hashing is spent on a single case, namely the test which
uses ping (mausezahn does not support flow labels).
On a non-debug kernel we spend 714 of 730 total test
runtime (97%) on this test case. While having flow label
support in a traffic gen tool / mausezahn would be best,
we can significantly speed up the loop by putting ip vrf exec
outside of the iteration.
In a test of 1000 pings using a normal loop takes 50 seconds
to finish. While using:
ip vrf exec $vrf sh -c "$loop-body"
takes 12 seconds (1/4 of the time).
Some of the slowness is likely due to our inefficient virtualization
setup, but even on my laptop running "ip link help" 16k times takes
25-30 seconds, so I think it's worth optimizing even for fastest
setups.
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20240817203659.712085-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The bridge VLAN implementation w.r.t. VLAN protocol is described in
merge commit 1a0b20b257 ("Merge branch 'bridge-next'"). We are only
sensitive to those VLAN tags whose TPID is equal to the bridge's
vlan_protocol. Thus, an 802.1ad VLAN should be treated as 802.1Q-untagged.
Add 3 tests which validate that:
- 802.1ad-tagged traffic is learned into the PVID of an 802.1Q-aware
bridge
- Double-tagged traffic is forwarded when just the PVID of the port is
present in the VLAN group of the ports
- Double-tagged traffic is not forwarded when the PVID of the port is
absent from the VLAN group of the ports
The test passes with both veth and ocelot.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A breakage in the felix DSA driver shows we do not have enough test
coverage. More generally, it is sufficiently special that it is likely
drivers will treat it differently.
This is not meant to be a full PTP test, it just makes sure that PTP
packets sent to the different addresses corresponding to their profiles
are received correctly. The local_termination selftest seemed like the
most appropriate place for this addition.
PTP RX/TX in some cases makes no sense (over a bridge) and this is why
$skip_ptp exists. And in others - PTP over a bridge port - the IP stack
needs convincing through the available bridge netfilter hooks to leave
the PTP packets alone and not stolen by the bridge rx_handler. It is
safe to assume that users have that figured out already. This is a
driver level test, and by using tcpdump, all that extra setup is out of
scope here.
send_non_ip() was an unfinished idea; written but never used.
Replace it with a more generic send_raw(), and send 3 PTP packet types
times 3 transports.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
xfail_on_veth() for this test is an incorrect approximation which gives
false positives and false negatives.
When local_termination fails with "reception succeeded, but should have failed",
it is because the DUT ($h2) accepts packets even when not configured as
promiscuous. This is not something specific to veth; even the bridge
behaves that way, but this is not captured by the xfail_on_veth test.
The IFF_UNICAST_FLT flag is not explicitly exported to user space, but
it can somewhat be determined from the interface's behavior. We have to
create a macvlan upper with a different MAC address. This forces a
dev_uc_add() call in the kernel. When the unicast filtering list is
not empty, but the device doesn't support IFF_UNICAST_FLT,
__dev_set_rx_mode() force-enables promiscuity on the interface, to
ensure correct behavior (that the requested address is received).
We can monitor the change in the promiscuity flag and infer from it
whether the device supports unicast filtering.
There is no equivalent thing for allmulti, unfortunately. We never know
what's hiding behind a device which has allmulti=off. Whether it will
actually perform RX multicast filtering of unknown traffic is a strong
"maybe". The bridge driver, for example, completely ignores the flag.
We'll have to keep the xfail behavior, but instead of XFAIL on just
veth, always XFAIL.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add more coverage to the local termination selftest as follows:
- 8021q upper of $h2
- 8021q upper of $h2, where $h2 is a port of a VLAN-unaware bridge
- 8021q upper of $h2, where $h2 is a port of a VLAN-aware bridge
- 8021q upper of VLAN-unaware br0, which is the upper of $h2
- 8021q upper of VLAN-aware br0, which is the upper of $h2
Especially the cases with traffic sent through the VLAN upper of a
VLAN-aware bridge port will be immediately relevant when we will start
transmitting PTP packets as an additional kind of traffic.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current bridge() test is for packet reception on a VLAN-unaware
bridge. Some things are different enough with VLAN-aware bridges that
it's worth renaming this test into vlan_unaware_bridge(), and add a new
vlan_aware_bridge() test.
The two will share the same implementation: bridge() becomes a common
function, which receives $vlan_filtering as an argument. Rename it to
test_bridge() at the same time, because just bridge() pollutes the
global namespace and we cannot invoke the binary with the same name from
the iproute2 package currently.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are upcoming tests which verify the RX filtering of a bridge
(or bridge port), but under differing vlan_filtering conditions.
Since we currently print $h2 (the DUT) in the log_test() output, it
becomes necessary to make a further distinction between tests, to not
give the user the impression that the exact same thing is run twice.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In future changes we will want to subject the DUT, $h2, to additional
VLAN-tagged traffic. For that, we need to run the tests using $h1.100 as
a sending interface, rather than the currently hardcoded $h1.
Add a parameter to run_test() and modify its 2 callers to explicitly
pass $h1, as was implicit before.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This will be used in other subtests as well; make new macvlan_create()
and macvlan_destroy() functions.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the testing kernel doesn't support setting fdb_max_learned or show
fdb_n_learned, just skip it. Or we will get errors like
./bridge_fdb_learning_limit.sh: line 218: [: null: integer expression expected
./bridge_fdb_learning_limit.sh: line 225: [: null: integer expression expected
Fixes: 6f84090333 ("selftests: forwarding: bridge_fdb_learning_limit: Add a new selftest")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Johannes Nixdorf <jnixdorf-oss@avm.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lately, an additional locking was added by commit c0a40097f0
("drivers: core: synchronize really_probe() and dev_uevent()"). The
locking protects dev_uevent() calling. This function is used to send
messages from the kernel to user space. Uevent messages notify user space
about changes in device states, such as when a device is added, removed,
or changed. These messages are used by udev (or other similar user-space
tools) to apply device-specific rules.
After reloading devlink instance, udev events should be processed. This
locking causes a short delay of udev events handling.
One example for useful udev rule is renaming ports. 'forwading.config'
can be configured to use names after udev rules are applied. Some tests run
devlink_reload() and immediately use the updated names. This worked before
the above mentioned commit was pushed, but now the delay of uevent messages
causes that devlink_reload() returns before udev events are handled and
tests fail.
Adjust devlink_reload() to not assume that udev events are already
processed when devlink reload is done, instead, wait for udev events to
ensure they are processed before returning from the function.
Without this patch:
TESTS='rif_mac_profile' ./resource_scale.sh
TEST: 'rif_mac_profile' 4 [ OK ]
sysctl: cannot stat /proc/sys/net/ipv6/conf/swp1/disable_ipv6: No such file or directory
sysctl: cannot stat /proc/sys/net/ipv6/conf/swp1/disable_ipv6: No such file or directory
sysctl: cannot stat /proc/sys/net/ipv6/conf/swp2/disable_ipv6: No such file or directory
sysctl: cannot stat /proc/sys/net/ipv6/conf/swp2/disable_ipv6: No such file or directory
Cannot find device "swp1"
Cannot find device "swp2"
TEST: setup_wait_dev (: Interface swp1 does not come up.) [FAIL]
With this patch:
$ TESTS='rif_mac_profile' ./resource_scale.sh
TEST: 'rif_mac_profile' 4 [ OK ]
TEST: 'rif_mac_profile' overflow 5 [ OK ]
This is relevant not only for this test.
Fixes: bc7cbb1e9f ("selftests: forwarding: Add devlink_lib.sh")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/89367666e04b38a8993027f1526801ca327ab96a.1720709333.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ageing time used by the test is too short for debug kernels and
results in entries being aged out prematurely [1].
Fix by increasing the ageing time.
The same change was done for the VLAN-aware version of the test in
commit dfbab74044 ("selftests: forwarding: Make vxlan-bridge-1q pass
on debug kernels").
[1]
# ./vxlan_bridge_1d.sh
[...]
# TEST: VXLAN: flood before learning [ OK ]
# TEST: VXLAN: show learned FDB entry [ OK ]
# TEST: VXLAN: learned FDB entry [FAIL]
# veth3: Expected to capture 0 packets, got 4.
# RTNETLINK answers: No such file or directory
# TEST: VXLAN: deletion of learned FDB entry [ OK ]
# TEST: VXLAN: Ageing of learned FDB entry [FAIL]
# veth3: Expected to capture 0 packets, got 2.
[...]
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240707095458.2870260-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The selftest does not use functions from mirror_gre_lib, ditch the import.
It does not use arping either, so drop the require_command as well.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mirroring tests are currently run in a skip_hw and optionally a skip_sw
mode. The former tests the SW datapath, the latter the HW datapath, if
available. In order to be able to test SW datapath on HW loopbacks, traps
are installed on ingress to get traffic from the HW datapath to the SW one.
This adds an unnecessary complexity when it would be much simpler to just
use a veth-based topology to test the SW datapath. Thus drop all the code
that supports this dual testing.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mirroring selftests work by sending ICMP traffic between two hosts.
Along the way, this traffic is mirrored to a gretap netdevice, and counter
taps are then installed strategically along the path of the mirrored
traffic to verify the mirroring took place.
The problem with this is that besides mirroring the primary traffic, any
other service traffic is mirrored as well. At the same time, because the
tests need to work in HW-offloaded scenarios, the ability of the device to
do arbitrary packet inspection should not be taken for granted. Most tests
therefore simply use matchall, one uses flower to match on IP address.
As a result, the selftests are noisy, because besides the primary ICMP
traffic, any amount of other service traffic is mirrored as well.
mirror_test() accommodated this noisiness by giving the counters an
allowance of several packets. But in the previous patch, where possible,
counter taps were changed to match only on an exact ICMP message. At least
in those cases, we can demand an exact number of packets to match.
Where the tap is installed on a connective netdevice, the exact matching is
not practical (though with u32, anything is possible). In those places,
there should still be some leeway -- and probably bigger than before,
because experience shows that these tests are very noisy.
To that end, change mirror_test() so that it can be either called with an
exact number to expect, or with an expression. Where leeway is needed,
adjust callers to pass a ">= 10" instead of mere 10.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mirroring selftests work by sending ICMP traffic between two hosts.
Along the way, this traffic is mirrored to a gretap netdevice, and counter
taps are then installed strategically along the path of the mirrored
traffic to verify the mirroring took place.
The problem with this is that besides mirroring the primary traffic, any
other service traffic is mirrored as well. At the same time, because the
tests need to work in HW-offloaded scenarios, the ability of the device to
do arbitrary packet inspection should not be taken for granted. Most tests
therefore simply use matchall, one uses flower to match on IP address.
As a result, the selftests are noisy, because besides the primary ICMP
traffic, any amount of other service traffic is mirrored as well.
However, often the counter tap is installed at the remote end of the gretap
tunnel. Since this is a SW-datapath scenario anyway, we can make the filter
arbitrarily accurate.
Thus in this patch, add parameters forward_type and backward_type to
several mirroring test helpers, as some other helpers already have. Then
change do_test_span_dir_ips() to instead of installing one generic tap and
using it for test in both directions, install the tap for each direction
separately, matching on the ICMP type given by these parameters.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The test works by sending packets through a tunnel, whence they are
forwarded to a LAG. One of the LAG children is removed from the LAG prior
to the exercise, and the test then counts how many packets pass through the
other one. The issue with this is that it counts all packets, not just the
encapsulated ones.
So instead add a second gretap endpoint to receive the sent packets, and
check reception counters there.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The argument is not used by these functions except to propagate it for
ultimately no purpose.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In some functions, argument-forwarding through "$@" without listing the
individual arguments explicitly is fundamental to the operation of a
function. E.g. xfail_on_veth() should be able to run various tests in the
fail-to-xfail regime, and usage of "$@" is appropriate as an abstraction
mechanism. For functions such as simple_if_init(), $@ is a handy way to
pass an array.
In other functions, it's merely a mechanism to save some typing, which
however ends up obscuring the real arguments and makes life hard for those
that end up reading the code.
This patch adds some of the implicit function arguments and correspondingly
expands $@'s. In several cases this will come in handy as following patches
adjust the parameter lists.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add cases to check minimum and maximum MTU which are exposed via
"ip -d link show". Test configuration and traffic. Use VLAN devices as
usually VLAN header (4 bytes) is not included in the MTU, and drivers
should configure hardware correctly to send maximum MTU payload size
in VLAN tagged packets.
$ ./min_max_mtu.sh
TEST: ping [ OK ]
TEST: ping6 [ OK ]
TEST: Test maximum MTU configuration [ OK ]
TEST: Test traffic, packet size is maximum MTU [ OK ]
TEST: Test minimum MTU configuration [ OK ]
TEST: Test traffic, packet size is minimum MTU [ OK ]
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/89de8be8989db7a97f3b39e3c9da695673e78d2e.1718275854.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test arp_ndisc_untracked_subnets use tcpdump to filter the unsolicited
and untracked na messages. It set -e before calling tcpdump. But if
tcpdump filters 0 packet, it will return none zero, and cause the script
to exit.
Instead of using slow tcpdump to capture packets, let's using tc rule
to filter out the na message.
At the same time, fix function setup_v6 which only needs one parameter.
Move all the related helpers from forwarding lib.sh to net lib.sh.
Fixes: 0ea7b0a454 ("selftests: net: arp_ndisc_untracked_subnets: test for arp_accept and accept_untracked_na")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240517010327.2631319-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Vladimir said when adding this test:
The bridge driver fares particularly badly [...] mainly because
it does not implement IFF_UNICAST_FLT.
See commit 90b9566aa5 ("selftests: forwarding: add a test for
local_termination.sh").
We don't want to hide the known gaps, but having a test which
always fails prevents us from catching regressions. Report
the cases we know may fail as XFAIL.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20240516152513.1115270-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When running the bridge IGMP/MLD selftests on debug kernels we can get
spurious errors when setting up the IGMP/MLD exclude timeout tests
because the membership interval is just 3 seconds and the setup has 2
seconds of sleep plus various validations, the one second that is left
is not enough. Increase the membership interval from 3 to 5 seconds to
make room for the setup validation and 2 seconds of sleep.
Fixes: 34d7ecb3d4 ("selftests: net: bridge: update IGMP/MLD membership interval value")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
