[ Upstream commit 35c3f72a2d ]
Prior to commit d935187cfb ("remoteproc: mediatek: Break lock
dependency to prepare_lock"), `scp->clk` was prepared and enabled only
when it needs to communicate with the SCP. The commit d935187cfb
moved the prepare operation to remoteproc's prepare(), keeping the clock
prepared as long as the SCP is running.
The power consumption due to the prolonged clock preparation can be
negligible when the system is running, as SCP is designed to be a very
power efficient processor.
However, the clock remains prepared even when the system enters system
suspend. This prevents the underlying clock controller (and potentially
the parent PLLs) from shutting down, which increases power consumption
and may block the system from entering deep sleep states.
Add suspend and resume callbacks. Unprepare the clock in suspend() if
it was active and re-prepare it in resume() to ensure the clock is
properly disabled during system suspend, while maintaining the "always
prepared" semantics while the system is active. The driver doesn't
implement .attach() callback, hence it only checks for RPROC_RUNNING.
Fixes: d935187cfb ("remoteproc: mediatek: Break lock dependency to prepare_lock")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20260206033034.3031781-1-tzungbi@kernel.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit da994db94e ]
The QMI message encoder has up until recently read a single byte (as
elem_size == 1), but with the introduction of big endian support it's
become apparent that this field is expected to be a full u32 -
regardless of the size of the length in the encoded message (which is
what elem_size specifies).
The result is that the encoder now reads past the length byte and
rejects the unreasonably large length formed when including the
following 3 bytes from the subsys_name array.
Fix this by changing to the expected type.
Fixes: 1fb82ee806 ("remoteproc: qcom: Introduce sysmon")
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Reviewed-by: Chris Lew <christopher.lew@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260220-qmi-encode-invalid-length-v2-1-5674be35ab29@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 04e707cb77 ]
With crash hotplug support enabled, additional memory is allocated to
the elfcorehdr kexec segment to accommodate resources added during
memory hotplug events. However, the kdump FDT is not updated with the
same size, which can result in elfcorehdr corruption in the kdump
kernel.
Update elf_headers_sz (the kimage member representing the size of the
elfcorehdr kexec segment) to reflect the total memory allocated for the
elfcorehdr segment instead of the elfcorehdr buffer size at the time of
kdump load. This allows of_kexec_alloc_and_setup_fdt() to reserve the
full elfcorehdr memory in the kdump FDT and prevents elfcorehdr
corruption.
Fixes: 849599b702 ("powerpc/crash: add crash memory hotplug support")
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260227171801.2238847-1-sourabhjain@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bad6722e47 ]
Consolidate the machine_kexec_mask_interrupts implementation into a common
function located in a new file: kernel/irq/kexec.c. This removes duplicate
implementations from architecture-specific files in arch/arm, arch/arm64,
arch/powerpc, and arch/riscv, reducing code duplication and improving
maintainability.
The new implementation retains architecture-specific behavior for
CONFIG_GENERIC_IRQ_KEXEC_CLEAR_VM_FORWARD, which was previously implemented
for ARM64. When enabled (currently for ARM64), it clears the active state
of interrupts forwarded to virtual machines (VMs) before handling other
interrupt masking operations.
Signed-off-by: Eliav Farber <farbere@amazon.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241204142003.32859-2-farbere@amazon.com
Stable-dep-of: 20197b967a ("powerpc/kexec/core: use big-endian types for crash variables")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ee95a1d45 ]
Test robot reports the following error with clang-16.0.6:
In file included from kernel/rseq.c:75:
include/linux/rseq_entry.h:141:3: error: invalid operand for instruction
unsafe_get_user(offset, &ucs->post_commit_offset, efault);
^
include/linux/uaccess.h:608:2: note: expanded from macro 'unsafe_get_user'
arch_unsafe_get_user(x, ptr, local_label); \
^
arch/powerpc/include/asm/uaccess.h:518:2: note: expanded from macro 'arch_unsafe_get_user'
__get_user_size_goto(__gu_val, __gu_addr, sizeof(*(p)), e); \
^
arch/powerpc/include/asm/uaccess.h:284:2: note: expanded from macro '__get_user_size_goto'
__get_user_size_allowed(x, ptr, size, __gus_retval); \
^
arch/powerpc/include/asm/uaccess.h:275:10: note: expanded from macro '__get_user_size_allowed'
case 8: __get_user_asm2(x, (u64 __user *)ptr, retval); break; \
^
arch/powerpc/include/asm/uaccess.h:258:4: note: expanded from macro '__get_user_asm2'
" li %1+1,0\n" \
^
<inline asm>:7:5: note: instantiated into assembly here
li 31+1,0
^
1 error generated.
On PPC32, for 64 bits vars a pair of registers is used. Usually the
lower register in the pair is the high part and the higher register is
the low part. GCC uses r3/r4 ... r11/r12 ... r14/r15 ... r30/r31
In older kernel code inline assembly was using %1 and %1+1 to represent
64 bits values. However here it looks like clang uses r31 as high part,
allthough r32 doesn't exist hence the error.
Allthoug %1+1 should work, most places now use %L1 instead of %1+1, so
let's do the same here.
With that change, the build doesn't fail anymore and a disassembly shows
clang uses r17/r18 and r31/r14 pair when GCC would have used r16/r17 and
r30/r31:
Disassembly of section .fixup:
00000000 <.fixup>:
0: 38 a0 ff f2 li r5,-14
4: 3a 20 00 00 li r17,0
8: 3a 40 00 00 li r18,0
c: 48 00 00 00 b c <.fixup+0xc>
c: R_PPC_REL24 .text+0xbc
10: 38 a0 ff f2 li r5,-14
14: 3b e0 00 00 li r31,0
18: 39 c0 00 00 li r14,0
1c: 48 00 00 00 b 1c <.fixup+0x1c>
1c: R_PPC_REL24 .text+0x144
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202602021825.otcItxGi-lkp@intel.com/
Fixes: c20beffeec ("powerpc/uaccess: Use flexible addressing with __put_user()/__get_user()")
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Acked-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/8ca3a657a650e497a96bfe7acde2f637dadab344.1770103646.git.chleroy@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5fe1a5451 ]
This will set AMDGPU_VCN_SMU_DPM_INTERFACE_* smu_type
based on soc type and fixing ring timeout issue seen
for DPM enabled case.
Signed-off-by: sguttula <suresh.guttula@amd.com>
Reviewed-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f0f23c315b38c55e8ce9484cf59b65811f350630)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5bf24c8ab ]
Although DIYINHK USB Audio 2.0 (ID 20b1:2009) shows the implicit
feedback source for the capture stream, this would cause several
problems for the playback. Namely, the device can get wMaxPackSize
1024 for 24/32 bit format with 6 channels, and when a high sample rate
like 352.8kHz or 384kHz is played, the packet size overflows the max
limit. Also, the device has another two playback altsets, and those
aren't properly handled with the implicit feedback.
Since the device has been working well even before introducing the
implicit feedback, we can assume that it works fine in the async mode.
This patch adds the explicit skip of the implicit fb detection to make
the playback running in the async mode.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221076
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260225085233.316306-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 32fc4168fa ]
The ASUS ExpertBook BM1503CDA (Ryzen 5 7535U, Barcelo-R) has an
internal DMIC connected through the AMD ACP (Audio CoProcessor)
but is missing from the DMI quirk table, so the acp6x machine
driver probe returns -ENODEV and no DMIC capture device is created.
Add the DMI entry so the internal microphone works out of the box.
Signed-off-by: Azamat Almazbek uulu <almazbek1608@gmail.com>
Reviewed-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20260221114813.5610-1-almazbek1608@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 70ca8caa96 ]
On a multipath SAS system some devices don't end up with correct symlinks
from the SCSI device to its enclosure. Some devices even have enclosure
links pointing to enclosures attached to different SCSI hosts.
ses_match_to_enclosure() calls enclosure_for_each_device() which iterates
over all enclosures on the system, not just enclosures attached to the
current SCSI host.
Replace the iteration with a direct call to ses_enclosure_find_by_addr().
Reviewed-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Link: https://patch.msgid.link/20260210191850.36784-1-thenzl@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ede902062 ]
The screen backlight turns off during boot (specifically during udev device
initialization) when returning true for _OSI("Windows 2009").
Analyzing the device's DSDT reveals that the firmware takes a different
code path when Windows 7 is reported, which leads to the backlight shutoff.
Add a DMI quirk to invoke dmi_disable_osi_win7 for this model.
Signed-off-by: Sofia Schneider <sofia@schn.dev>
Link: https://patch.msgid.link/20260223025240.518509-1-sofia@schn.dev
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2259d14499 ]
Currently, mac80211 only initializes default WMM parameters
on the deflink during do_open(). For MLO cases, this
leaves the additional links without proper WMM defaults
if hostapd does not supply per-link WMM parameters, leading
to inconsistent QoS behavior across links.
Set default WMM parameters for each link during
ieee80211_vif_update_links(), because this ensures all
individual links in an MLD have valid WMM settings during
bring-up and behave consistently across different BSS.
Signed-off-by: Ramanathan Choodamani <quic_rchoodam@quicinc.com>
Signed-off-by: Aishwarya R <aishwarya.r@oss.qualcomm.com>
Link: https://patch.msgid.link/20260205094216.3093542-1-aishwarya.r@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c4b2243cb ]
There's an unpleasant corner case in unshare(2), when we have a
CLONE_NEWNS in flags and current->fs hadn't been shared at all; in that
case copy_mnt_ns() gets passed current->fs instead of a private copy,
which causes interesting warts in proof of correctness]
> I guess if private means fs->users == 1, the condition could still be true.
Unfortunately, it's worse than just a convoluted proof of correctness.
Consider the case when we have CLONE_NEWCGROUP in addition to CLONE_NEWNS
(and current->fs->users == 1).
We pass current->fs to copy_mnt_ns(), all right. Suppose it succeeds and
flips current->fs->{pwd,root} to corresponding locations in the new namespace.
Now we proceed to copy_cgroup_ns(), which fails (e.g. with -ENOMEM).
We call put_mnt_ns() on the namespace created by copy_mnt_ns(), it's
destroyed and its mount tree is dissolved, but... current->fs->root and
current->fs->pwd are both left pointing to now detached mounts.
They are pinning those, so it's not a UAF, but it leaves the calling
process with unshare(2) failing with -ENOMEM _and_ leaving it with
pwd and root on detached isolated mounts. The last part is clearly a bug.
There is other fun related to that mess (races with pivot_root(), including
the one between pivot_root() and fork(), of all things), but this one
is easy to isolate and fix - treat CLONE_NEWNS as "allocate a new
fs_struct even if it hadn't been shared in the first place". Sure, we could
go for something like "if both CLONE_NEWNS *and* one of the things that might
end up failing after copy_mnt_ns() call in create_new_namespaces() are set,
force allocation of new fs_struct", but let's keep it simple - the cost
of copy_fs_struct() is trivial.
Another benefit is that copy_mnt_ns() with CLONE_NEWNS *always* gets
a freshly allocated fs_struct, yet to be attached to anything. That
seriously simplifies the analysis...
FWIW, that bug had been there since the introduction of unshare(2) ;-/
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://patch.msgid.link/20260207082524.GE3183987@ZenIV
Tested-by: Waiman Long <longman@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1cb3c20688 ]
On Star Labs StarFighter (Realtek ALC233/235), the internal speakers can
emit an audible pop when entering or leaving runtime suspend.
Mute the speaker output paths via snd_hda_gen_shutup_speakers() in the
Realtek shutup callback before the codec is powered down.
This is enough to avoid the pop without special EAPD handling.
Test results:
- runtime PM pop fixed
- still reaches D3 (PCI 0000:00:1f.3 power_state=D3hot)
- does not address pops on cold boot (G3 exit) or around display manager
start/shutdown
journalctl -k (boot):
- snd_hda_codec_alc269 hdaudioC0D0: ALC233: picked fixup for PCI SSID
7017:2014
- snd_hda_codec_alc269 hdaudioC0D0: autoconfig for ALC233: line_outs=1
(0x1b/0x0/0x0/0x0/0x0) type:speaker
Suggested-by: Takashi Iwai <tiwai@suse.com>
Tested-by: Sean Rhodes <sean@starlabs.systems>
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Link: https://patch.msgid.link/4d5fb71b132bb283fd41c622b8413770b2065242.1771532060.git.sean@starlabs.systems
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa96392ebe ]
The driver encountered a crash during resource cleanup when the reply and
request queues were NULL due to freed memory. This issue occurred when the
creation of reply or request queues failed, and the driver freed the memory
first, but attempted to mem set the content of the freed memory, leading to
a system crash.
Add NULL pointer checks for reply and request queues before accessing the
reply/request memory during cleanup
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://patch.msgid.link/20260212070026.30263-1-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ee0e6e69a7 upstream.
If the ata_qc_for_each_raw() loop finishes without finding a matching SCSI
command for any QC, the variable qc will hold a pointer to the last element
examined, which has the tag i == ATA_MAX_QUEUE - 1. This qc can match the
port deferred QC (ap->deferred_qc).
If that happens, the condition qc == ap->deferred_qc evaluates to true
despite the loop not breaking with a match on the SCSI command for this QC.
In that case, the error handler mistakenly intercepts a command that has
not been issued yet and that has not timed out, and thus erroneously
returning a timeout error.
Fix the problem by checking for i < ATA_MAX_QUEUE in addition to
qc == ap->deferred_qc.
The problem was found by an experimental code review agent based on
gemini-3.1-pro while reviewing backports into v6.18.y.
Assisted-by: Gemini:gemini-3.1-pro
Fixes: eddb98ad93 ("ata: libata-eh: correctly handle deferred qc timeouts")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[cassel: modified commit log as suggested by Damien]
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aac9b27f7c upstream.
Syzbot reported a WARN_ON() in ata_scsi_deferred_qc_work(), caused by
ap->ops->qc_defer() returning non-zero before issuing the deferred qc.
ata_scsi_schedule_deferred_qc() is called during each command completion.
This function will check if there is a deferred QC, and if
ap->ops->qc_defer() returns zero, meaning that it is possible to queue the
deferred qc at this time (without being deferred), then it will queue the
work which will issue the deferred qc.
Once the work get to run, which can potentially be a very long time after
the work was scheduled, there is a WARN_ON() if ap->ops->qc_defer() returns
non-zero.
While we hold the ap->lock both when assigning and clearing deferred_qc,
and the work itself holds the ap->lock, the code currently does not cancel
the work after clearing the deferred qc.
This means that the following scenario can happen:
1) One or several NCQ commands are queued.
2) A non-NCQ command is queued, gets stored in ap->deferred_qc.
3) Last NCQ command gets completed, work is queued to issue the deferred
qc.
4) Timeout or error happens, ap->deferred_qc is cleared. The queued work is
currently NOT canceled.
5) Port is reset.
6) One or several NCQ commands are queued.
7) A non-NCQ command is queued, gets stored in ap->deferred_qc.
8) Work is finally run. Yet at this time, there is still NCQ commands in
flight.
The work in 8) really belongs to the non-NCQ command in 2), not to the
non-NCQ command in 7). The reason why the work is executed when it is not
supposed to, is because it was never canceled when ap->deferred_qc was
cleared in 4). Thus, ensure that we always cancel the work after clearing
ap->deferred_qc.
Another potential fix would have been to let ata_scsi_deferred_qc_work() do
nothing if ap->ops->qc_defer() returns non-zero. However, canceling the
work when clearing ap->deferred_qc seems slightly more logical, as we hold
the ap->lock when clearing ap->deferred_qc, so we know that the work cannot
be holding the lock. (The function could be waiting for the lock, but that
is okay since it will do nothing if ap->deferred_qc is not set.)
Reported-by: syzbot+bcaf842a1e8ead8dfb89@syzkaller.appspotmail.com
Fixes: 0ea84089db ("ata: libata-scsi: avoid Non-NCQ command starvation")
Fixes: eddb98ad93 ("ata: libata-eh: correctly handle deferred qc timeouts")
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eddb98ad93 upstream.
A deferred qc may timeout while waiting for the device queue to drain
to be submitted. In such case, since the qc is not active,
ata_scsi_cmd_error_handler() ends up calling scsi_eh_finish_cmd(),
which frees the qc. But as the port deferred_qc field still references
this finished/freed qc, the deferred qc work may eventually attempt to
call ata_qc_issue() against this invalid qc, leading to errors such as
reported by UBSAN (syzbot run):
UBSAN: shift-out-of-bounds in drivers/ata/libata-core.c:5166:24
shift exponent 4210818301 is too large for 64-bit type 'long long unsigned int'
...
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x100/0x190 lib/dump_stack.c:120
ubsan_epilogue+0xa/0x30 lib/ubsan.c:233
__ubsan_handle_shift_out_of_bounds+0x279/0x2a0 lib/ubsan.c:494
ata_qc_issue.cold+0x38/0x9f drivers/ata/libata-core.c:5166
ata_scsi_deferred_qc_work+0x154/0x1f0 drivers/ata/libata-scsi.c:1679
process_one_work+0x9d7/0x1920 kernel/workqueue.c:3275
process_scheduled_works kernel/workqueue.c:3358 [inline]
worker_thread+0x5da/0xe40 kernel/workqueue.c:3439
kthread+0x370/0x450 kernel/kthread.c:467
ret_from_fork+0x754/0xd80 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
Fix this by checking if the qc of a timed out SCSI command is a deferred
one, and in such case, clear the port deferred_qc field and finish the
SCSI command with DID_TIME_OUT.
Reported-by: syzbot+1f77b8ca15336fff21ff@syzkaller.appspotmail.com
Fixes: 0ea84089db ("ata: libata-scsi: avoid Non-NCQ command starvation")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 55db009926 upstream.
cancel_work_sync() is a sleeping function so it cannot be called with
the spin lock of a port being held. Move the call to this function in
ata_port_detach() after EH completes, with the port lock released,
together with other work cancellation calls.
Fixes: 0ea84089db ("ata: libata-scsi: avoid Non-NCQ command starvation")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8e135b8aee upstream.
AppArmor was putting the reference to i_private data on its end after
removing the original entry from the file system. However the inode
can aand does live beyond that point and it is possible that some of
the fs call back functions will be invoked after the reference has
been put, which results in a race between freeing the data and
accessing it through the fs.
While the rawdata/loaddata is the most likely candidate to fail the
race, as it has the fewest references. If properly crafted it might be
possible to trigger a race for the other types stored in i_private.
Fix this by moving the put of i_private referenced data to the correct
place which is during inode eviction.
Fixes: c961ee5f21 ("apparmor: convert from securityfs to apparmorfs for policy ns files")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Reviewed-by: Maxime Bélair <maxime.belair@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a0b7091c4d upstream.
There is a race condition that leads to a use-after-free situation:
because the rawdata inodes are not refcounted, an attacker can start
open()ing one of the rawdata files, and at the same time remove the
last reference to this rawdata (by removing the corresponding profile,
for example), which frees its struct aa_loaddata; as a result, when
seq_rawdata_open() is reached, i_private is a dangling pointer and
freed memory is accessed.
The rawdata inodes weren't refcounted to avoid a circular refcount and
were supposed to be held by the profile rawdata reference. However
during profile removal there is a window where the vfs and profile
destruction race, resulting in the use after free.
Fix this by moving to a double refcount scheme. Where the profile
refcount on rawdata is used to break the circular dependency. Allowing
for freeing of the rawdata once all inode references to the rawdata
are put.
Fixes: 5d5182cae4 ("apparmor: move to per loaddata files, instead of replicating in profiles")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Reviewed-by: Maxime Bélair <maxime.belair@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 39440b1375 upstream.
Differential encoding allows loops to be created if it is abused. To
prevent this the unpack should verify that a diff-encode chain
terminates.
Unfortunately the differential encode verification had two bugs.
1. it conflated states that had gone through check and already been
marked, with states that were currently being checked and marked.
This means that loops in the current chain being verified are treated
as a chain that has already been verified.
2. the order bailout on already checked states compared current chain
check iterators j,k instead of using the outer loop iterator i.
Meaning a step backwards in states in the current chain verification
was being mistaken for moving to an already verified state.
Move to a double mark scheme where already verified states get a
different mark, than the current chain being kept. This enables us
to also drop the backwards verification check that was the cause of
the second error as any already verified state is already marked.
Fixes: 031dcc8f4e ("apparmor: dfa add support for state differential encoding")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6601e13e82 upstream.
An unprivileged local user can load, replace, and remove profiles by
opening the apparmorfs interfaces, via a confused deputy attack, by
passing the opened fd to a privileged process, and getting the
privileged process to write to the interface.
This does require a privileged target that can be manipulated to do
the write for the unprivileged process, but once such access is
achieved full policy management is possible and all the possible
implications that implies: removing confinement, DoS of system or
target applications by denying all execution, by-passing the
unprivileged user namespace restriction, to exploiting kernel bugs for
a local privilege escalation.
The policy management interface can not have its permissions simply
changed from 0666 to 0600 because non-root processes need to be able
to load policy to different policy namespaces.
Instead ensure the task writing the interface has privileges that
are a subset of the task that opened the interface. This is already
done via policy for confined processes, but unconfined can delegate
access to the opened fd, by-passing the usual policy check.
Fixes: b7fd2c0340 ("apparmor: add per policy ns .load, .replace, .remove interface files")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5df0c44e8f upstream.
if ns_name is NULL after
1071 error = aa_unpack(udata, &lh, &ns_name);
and if ent->ns_name contains an ns_name in
1089 } else if (ent->ns_name) {
then ns_name is assigned the ent->ns_name
1095 ns_name = ent->ns_name;
however ent->ns_name is freed at
1262 aa_load_ent_free(ent);
and then again when freeing ns_name at
1270 kfree(ns_name);
Fix this by NULLing out ent->ns_name after it is transferred to ns_name
Fixes: 145a0ef21c ("apparmor: fix blob compression when ns is forced on a policy load")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3060394149 upstream.
Currently the number of policy namespaces is not bounded relying on
the user namespace limit. However policy namespaces aren't strictly
tied to user namespaces and it is possible to create them and nest
them arbitrarily deep which can be used to exhaust system resource.
Hard cap policy namespaces to the same depth as user namespaces.
Fixes: c88d4c7b04 ("AppArmor: core policy routines")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Reviewed-by: Ryan Lee <ryan.lee@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ab09264660 upstream.
The profile removal code uses recursion when removing nested profiles,
which can lead to kernel stack exhaustion and system crashes.
Reproducer:
$ pf='a'; for ((i=0; i<1024; i++)); do
echo -e "profile $pf { \n }" | apparmor_parser -K -a;
pf="$pf//x";
done
$ echo -n a > /sys/kernel/security/apparmor/.remove
Replace the recursive __aa_profile_list_release() approach with an
iterative approach in __remove_profile(). The function repeatedly
finds and removes leaf profiles until the entire subtree is removed,
maintaining the same removal semantic without recursion.
Fixes: c88d4c7b04 ("AppArmor: core policy routines")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Signed-off-by: Massimiliano Pellizzer <massimiliano.pellizzer@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e38c55d9f8 upstream.
The function sets `*ns = NULL` on every call, leaking the namespace
string allocated in previous iterations when multiple profiles are
unpacked. This also breaks namespace consistency checking since *ns
is always NULL when the comparison is made.
Remove the incorrect assignment.
The caller (aa_unpack) initializes *ns to NULL once before the loop,
which is sufficient.
Fixes: dd51c84857 ("apparmor: provide base for multiple profiles to be replaced at once")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Signed-off-by: Massimiliano Pellizzer <massimiliano.pellizzer@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9063d7e261 upstream.
Start states are read from untrusted data and used as indexes into the
DFA state tables. The aa_dfa_next() function call in unpack_pdb() will
access dfa->tables[YYTD_ID_BASE][start], and if the start state exceeds
the number of states in the DFA, this results in an out-of-bound read.
==================================================================
BUG: KASAN: slab-out-of-bounds in aa_dfa_next+0x2a1/0x360
Read of size 4 at addr ffff88811956fb90 by task su/1097
...
Reject policies with out-of-bounds start states during unpacking
to prevent the issue.
Fixes: ad5ff3db53 ("AppArmor: Add ability to load extended policy")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Signed-off-by: Massimiliano Pellizzer <massimiliano.pellizzer@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 457965c13f ]
If trigger_data_alloc() fails and returns NULL, event_hist_trigger_parse()
jumps to the out_free error path. While kfree() safely handles a NULL
pointer, trigger_data_free() does not. This causes a NULL pointer
dereference in trigger_data_free() when evaluating
data->cmd_ops->set_filter.
Fix the problem by adding a NULL pointer check to trigger_data_free().
The problem was found by an experimental code review agent based on
gemini-3.1-pro while reviewing backports into v6.18.y.
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://patch.msgid.link/20260305193339.2810953-1-linux@roeck-us.net
Fixes: 0550069cc2 ("tracing: Properly process error handling in event_hist_trigger_parse()")
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d87c828daa ]
The FEAT_SVE2p1 is indicated by ID_AA64ZFR0_EL1.SVEver. However,
the BFADD requires the FEAT_SVE_B16B16, which is indicated by
ID_AA64ZFR0_EL1.B16B16. This could cause the test to incorrectly
fail on a CPU that supports FEAT_SVE2.1 but not FEAT_SVE_B16B16.
LD1Q Gather load quadwords which is decoded from SVE encodings and
implied by FEAT_SVE2p1.
Fixes: c5195b027d ("kselftest/arm64: Add SVE 2.1 to hwcap test")
Signed-off-by: Yifan Wu <wuyifan50@huawei.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c69d22c6c4 ]
The only user of frag_size field in XDP RxQ info is
bpf_xdp_frags_increase_tail(). It clearly expects whole buffer size instead
of DMA write size. Different assumptions in i40e driver configuration lead
to negative tailroom.
Set frag_size to the same value as frame_sz in shared pages mode, use new
helper to set frag_size when AF_XDP ZC is active.
Fixes: a045d2f2d0 ("i40e: set xdp_rxq_info::frag_size")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20260305111253.2317394-7-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88b6b7f7b2 ]
The current formula for calculating XDP tailroom in mbuf packets works only
if each frag has its own page (if rxq->frag_size is PAGE_SIZE), this
defeats the purpose of the parameter overall and without any indication
leads to negative calculated tailroom on at least half of frags, if shared
pages are used.
There are not many drivers that set rxq->frag_size. Among them:
* i40e and enetc always split page uniformly between frags, use shared
pages
* ice uses page_pool frags via libeth, those are power-of-2 and uniformly
distributed across page
* idpf has variable frag_size with XDP on, so current API is not applicable
* mlx5, mtk and mvneta use PAGE_SIZE or 0 as frag_size for page_pool
As for AF_XDP ZC, only ice, i40e and idpf declare frag_size for it. Modulo
operation yields good results for aligned chunks, they are all power-of-2,
between 2K and PAGE_SIZE. Formula without modulo fails when chunk_size is
2K. Buffers in unaligned mode are not distributed uniformly, so modulo
operation would not work.
To accommodate unaligned buffers, we could define frag_size as
data + tailroom, and hence do not subtract offset when calculating
tailroom, but this would necessitate more changes in the drivers.
Define rxq->frag_size as an even portion of a page that fully belongs to a
single frag. When calculating tailroom, locate the data start within such
portion by performing a modulo operation on page offset.
Fixes: bf25146a55 ("bpf: add frags support to the bpf_xdp_adjust_tail() API")
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20260305111253.2317394-2-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21ec92774d ]
When a standalone IPv6 nexthop object is created with a loopback device
(e.g., "ip -6 nexthop add id 100 dev lo"), fib6_nh_init() misclassifies
it as a reject route. This is because nexthop objects have no destination
prefix (fc_dst=::), causing fib6_is_reject() to match any loopback
nexthop. The reject path skips fib_nh_common_init(), leaving
nhc_pcpu_rth_output unallocated. If an IPv4 route later references this
nexthop, __mkroute_output() dereferences NULL nhc_pcpu_rth_output and
panics.
Simplify the check in fib6_nh_init() to only match explicit reject
routes (RTF_REJECT) instead of using fib6_is_reject(). The loopback
promotion heuristic in fib6_is_reject() is handled separately by
ip6_route_info_create_nh(). After this change, the three cases behave
as follows:
1. Explicit reject route ("ip -6 route add unreachable 2001:db8::/64"):
RTF_REJECT is set, enters reject path, skips fib_nh_common_init().
No behavior change.
2. Implicit loopback reject route ("ip -6 route add 2001:db8::/32 dev lo"):
RTF_REJECT is not set, takes normal path, fib_nh_common_init() is
called. ip6_route_info_create_nh() still promotes it to reject
afterward. nhc_pcpu_rth_output is allocated but unused, which is
harmless.
3. Standalone nexthop object ("ip -6 nexthop add id 100 dev lo"):
RTF_REJECT is not set, takes normal path, fib_nh_common_init() is
called. nhc_pcpu_rth_output is properly allocated, fixing the crash
when IPv4 routes reference this nexthop.
Suggested-by: Ido Schimmel <idosch@nvidia.com>
Fixes: 493ced1ac4 ("ipv4: Allow routes to use nexthop objects")
Reported-by: syzbot+334190e097a98a1b81bb@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/698f8482.a70a0220.2c38d7.00ca.GAE@google.com/T/
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260304113817.294966-2-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 168ff39e47 ]
When booting with the 'ipv6.disable=1' parameter, the nd_tbl is never
initialized because inet6_init() exits before ndisc_init() is called
which initializes it. If an IPv6 packet is injected into the interface,
route_shortcircuit() is called and a NULL pointer dereference happens on
neigh_lookup().
BUG: kernel NULL pointer dereference, address: 0000000000000380
Oops: Oops: 0000 [#1] SMP NOPTI
[...]
RIP: 0010:neigh_lookup+0x20/0x270
[...]
Call Trace:
<TASK>
vxlan_xmit+0x638/0x1ef0 [vxlan]
dev_hard_start_xmit+0x9e/0x2e0
__dev_queue_xmit+0xbee/0x14e0
packet_sendmsg+0x116f/0x1930
__sys_sendto+0x1f5/0x200
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x12f/0x1590
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fix this by adding an early check on route_shortcircuit() when protocol
is ETH_P_IPV6. Note that ipv6_mod_enabled() cannot be used here because
VXLAN can be built-in even when IPv6 is built as a module.
Fixes: e15a00aafa ("vxlan: add ipv6 route short circuit support")
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260304120357.9778-2-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
