[ Upstream commit be054cc66f ]
Commit 38a6f08657 ("net: sched: support hash selecting tx queue")
added SKBEDIT_F_TXQ_SKBHASH support. The inclusive range size is
computed as:
mapping_mod = queue_mapping_max - queue_mapping + 1;
The range size can be 65536 when the requested range covers all possible
u16 queue IDs (e.g. queue_mapping=0 and queue_mapping_max=U16_MAX).
That value cannot be represented in a u16 and previously wrapped to 0,
so tcf_skbedit_hash() could trigger a divide-by-zero:
queue_mapping += skb_get_hash(skb) % params->mapping_mod;
Compute mapping_mod in a wider type and reject ranges larger than U16_MAX
to prevent params->mapping_mod from becoming 0 and avoid the crash.
Fixes: 38a6f08657 ("net: sched: support hash selecting tx queue")
Cc: stable@vger.kernel.org # 6.12+
Signed-off-by: Ruitong Liu <cnitlrt@gmail.com>
Link: https://patch.msgid.link/20260213175948.1505257-1-cnitlrt@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 14f66f4464 ]
In several places in the code, we have a label to signify
the start of the code where a request can be replayed if
necessary. However, some of these places were missing the
necessary reinitializations of certain local variables
before replay.
This change makes sure that these variables get initialized
after the label.
Cc: stable@vger.kernel.org
Reported-by: Yuchan Nam <entropy1110@gmail.com>
Tested-by: Yuchan Nam <entropy1110@gmail.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b28da0d092 ]
Fix Sun FFB1 corrupted video out ([1] and [2]) by disabling overlay and
initializing window mode to a known state. The issue never appeared on
my FFB2+/vertical nor Elite3D/M6. It could also depend on the PROM
version.
/SUNW,ffb@1e,0: FFB at 000001fc00000000, type 11, DAC pnum[236c] rev[10] manuf_rev[4]
X (II) /dev/fb0: Detected FFB1, Z-buffer, Single-buffered.
X (II) /dev/fb0: BT9068 (PAC1) ramdac detected (with normal cursor control)
X (II) /dev/fb0: Detected Creator/Creator3D
[1] https://www.instagram.com/p/DUTcSmSjSem/
[2] https://chaos.social/@ReneRebe/116023241660154102
Signed-off-by: René Rebe <rene@exactco.de>
Cc: stable@kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eacf9840ae ]
of_parse_phandle() returns a device_node with refcount incremented,
which is stored in 'entry' and then copied to 'native_mode'. When the
error paths at lines 184 or 192 jump to 'entryfail', native_mode's
refcount is not decremented, causing a refcount leak.
Fix this by changing the goto target from 'entryfail' to 'timingfail',
which properly calls of_node_put(native_mode) before cleanup.
Fixes: cc3f414cf2 ("video: add of helper for display timings/videomode")
Cc: stable@vger.kernel.org
Signed-off-by: Weigang He <geoffreyhe2@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88b3b99243 ]
fbi->fb.screen_buffer is allocated with dma_alloc_coherent() but is not
freed if the error path is reached.
Fixes: e7b995371f ("video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 011a050280 ]
If fbcon_open() fails when called from con2fb_acquire_newinfo() then
info->fbcon_par pointer remains NULL which is later dereferenced.
Add check for return value of the function con2fb_acquire_newinfo() to
avoid it.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: d1baa4ffa6 ("fbcon: set_con2fb_map fixes")
Cc: stable@vger.kernel.org
Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f043a93fff ]
In some physical memory layout designs, the address space of CFMW (CXL
Fixed Memory Window) resides between multiple segments of system memory
belonging to the same NUMA node. In numa_cleanup_meminfo, these multiple
segments of system memory are merged into a larger numa_memblk. When
identifying which NUMA node the CFMW belongs to, it may be incorrectly
assigned to the NUMA node of the merged system memory.
When a CXL RAM region is created in userspace, the memory capacity of
the newly created region is not added to the CFMW-dedicated NUMA node.
Instead, it is accumulated into an existing NUMA node (e.g., NUMA0
containing RAM). This makes it impossible to clearly distinguish
between the two types of memory, which may affect memory-tiering
applications.
Example memory layout:
Physical address space:
0x00000000 - 0x1FFFFFFF System RAM (node0)
0x20000000 - 0x2FFFFFFF CXL CFMW (node2)
0x40000000 - 0x5FFFFFFF System RAM (node0)
0x60000000 - 0x7FFFFFFF System RAM (node1)
After numa_cleanup_meminfo, the two node0 segments are merged into one:
0x00000000 - 0x5FFFFFFF System RAM (node0) // CFMW is inside the range
0x60000000 - 0x7FFFFFFF System RAM (node1)
So the CFMW (0x20000000-0x2FFFFFFF) will be incorrectly assigned to node0.
To address this scenario, accurately identifying the correct NUMA node
can be achieved by checking whether the region belongs to both
numa_meminfo and numa_reserved_meminfo.
While this issue is only observed in a QEMU configuration, and no known
end users are impacted by this problem, it is likely that some firmware
implementation is leaving memory map holes in a CXL Fixed Memory Window.
CXL hotplug depends on mapping free window capacity, and it seems to be
only a coincidence to have not hit this problem yet.
Fixes: 779dd20cfb ("cxl/region: Add region creation support")
Signed-off-by: Cui Chao <cuichao1753@phytium.com.cn>
Cc: stable@vger.kernel.org
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20260213060347.2389818-2-cuichao1753@phytium.com.cn
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6db8b56eed ]
On the receive path, __ioam6_fill_trace_data() uses trace->nodelen
to decide how much data to write for each node. It trusts this field
as-is from the incoming packet, with no consistency check against
trace->type (the 24-bit field that tells which data items are
present). A crafted packet can set nodelen=0 while setting type bits
0-21, causing the function to write ~100 bytes past the allocated
region (into skb_shared_info), which corrupts adjacent heap memory
and leads to a kernel panic.
Add a shared helper ioam6_trace_compute_nodelen() in ioam6.c to
derive the expected nodelen from the type field, and use it:
- in ioam6_iptunnel.c (send path, existing validation) to replace
the open-coded computation;
- in exthdrs.c (receive path, ipv6_hop_ioam) to drop packets whose
nodelen is inconsistent with the type field, before any data is
written.
Per RFC 9197, bits 12-21 are each short (4-octet) fields, so they
are included in IOAM6_MASK_SHORT_FIELDS (changed from 0xff100000 to
0xff1ffc00).
Fixes: 9ee11f0fff ("ipv6: ioam: Data plane support for Pre-allocated Trace")
Cc: stable@vger.kernel.org
Signed-off-by: Junxi Qian <qjx1298677004@gmail.com>
Reviewed-by: Justin Iurman <justin.iurman@gmail.com>
Link: https://patch.msgid.link/20260211040412.86195-1-qjx1298677004@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53b2fae90f ]
When registering a second fgraph callback, direct path is disabled and
array loop is used instead. When ftrace_graph_active falls back to one,
we try to re-enable direct mode via ftrace_graph_enable_direct(true, ...).
But ftrace_graph_enable_direct() incorrectly disables the static key
rather than enabling it. This leaves fgraph_do_direct permanently off
after first multi-callback transition, so direct fast mode is never
restored.
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260213142932519cuWSpEXeS4-UnCvNXnK2P@zte.com.cn
Fixes: cc60ee813b ("function_graph: Use static_call and branch to optimize entry function")
Signed-off-by: Shengming Hu <hu.shengming@zte.com.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8930878101 ]
When the PCA-200E or SBA-200E adapter is being detached, the fore200e
is deallocated. However, the tx_tasklet or rx_tasklet may still be running
or pending, leading to use-after-free bug when the already freed fore200e
is accessed again in fore200e_tx_tasklet() or fore200e_rx_tasklet().
One of the race conditions can occur as follows:
CPU 0 (cleanup) | CPU 1 (tasklet)
fore200e_pca_remove_one() | fore200e_interrupt()
fore200e_shutdown() | tasklet_schedule()
kfree(fore200e) | fore200e_tx_tasklet()
| fore200e-> // UAF
Fix this by ensuring tx_tasklet or rx_tasklet is properly canceled before
the fore200e is released. Add tasklet_kill() in fore200e_shutdown() to
synchronize with any pending or running tasklets. Moreover, since
fore200e_reset() could prevent further interrupts or data transfers,
the tasklet_kill() should be placed after fore200e_reset() to prevent
the tasklet from being rescheduled in fore200e_interrupt(). Finally,
it only needs to do tasklet_kill() when the fore200e state is greater
than or equal to FORE200E_STATE_IRQ, since tasklets are uninitialized
in earlier states. In a word, the tasklet_kill() should be placed in
the FORE200E_STATE_IRQ branch within the switch...case structure.
This bug was identified through static analysis.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@kernel.org
Suggested-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260210094537.9767-1-duoming@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b18fc0ab83 ]
Invalidating a dmabuf will impact other users of the shared BO.
In the scenario where process A moves the BO, it needs to inform
process B about the move and process B will need to update its
page table.
The commit fixes a synchronisation bug caused by the use of the
ticket: it made amdgpu_vm_handle_moved behave as if updating
the page table immediately was correct but in this case it's not.
An example is the following scenario, with 2 GPUs and glxgears
running on GPU0 and Xorg running on GPU1, on a system where P2P
PCI isn't supported:
glxgears:
export linear buffer from GPU0 and import using GPU1
submit frame rendering to GPU0
submit tiled->linear blit
Xorg:
copy of linear buffer
The sequence of jobs would be:
drm_sched_job_run # GPU0, frame rendering
drm_sched_job_queue # GPU0, blit
drm_sched_job_done # GPU0, frame rendering
drm_sched_job_run # GPU0, blit
move linear buffer for GPU1 access #
amdgpu_dma_buf_move_notify -> update pt # GPU0
It this point the blit job on GPU0 is still running and would
likely produce a page fault.
Cc: stable@vger.kernel.org
Fixes: a448cb003e ("drm/amdgpu: implement amdgpu_gem_prime_move_notify v2")
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6bded921e ]
Explicit fixed file install/remove operations on slots outside the
configured alloc range can corrupt alloc_hint via io_file_bitmap_set()
and io_file_bitmap_clear(), which unconditionally update alloc_hint to
the bit position. This causes subsequent auto-allocations to fall
outside the configured range.
For example, if the alloc range is [10, 20) and a file is removed at
slot 2, alloc_hint gets set to 2. The next auto-alloc then starts
searching from slot 2, potentially returning a slot below the range.
Fix this by clamping alloc_hint to [file_alloc_start, file_alloc_end)
at the top of io_file_bitmap_get() before starting the search.
Cc: stable@vger.kernel.org
Fixes: 6e73dffbb9 ("io_uring: let to set a range for file slot allocation")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf9cf80cab ]
In commit 99537d5c47 ("net: macb: Relocate mog_init_rings() callback
from macb_mac_link_up() to macb_open()"), the mog_init_rings() callback
was moved from macb_mac_link_up() to macb_open() to resolve a deadlock
issue. However, this change introduced a tx/rx malfunction following
phy link down and up events. The issue arises from a mismatch between
the software queue->tx_head, queue->tx_tail, queue->rx_prepared_head,
and queue->rx_tail values and the hardware's internal tx/rx queue
pointers.
According to the Zynq UltraScale TRM [1], when tx/rx is disabled, the
internal tx queue pointer resets to the value in the tx queue base
address register, while the internal rx queue pointer remains unchanged.
The following is quoted from the Zynq UltraScale TRM:
When transmit is disabled, with bit [3] of the network control register
set low, the transmit-buffer queue pointer resets to point to the address
indicated by the transmit-buffer queue base address register. Disabling
receive does not have the same effect on the receive-buffer queue
pointer.
Additionally, there is no need to reset the RBQP and TBQP registers in a
phy event callback. Therefore, move macb_init_buffers() to macb_open().
In a phy link up event, the only required action is to reset the tx
software head and tail pointers to align with the hardware's behavior.
[1] https://docs.amd.com/v/u/en-US/ug1085-zynq-ultrascale-trm
Fixes: 99537d5c47 ("net: macb: Relocate mog_init_rings() callback from macb_mac_link_up() to macb_open()")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260208-macb-init-ring-v1-1-939a32c14635@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e3998b6e90 ]
Commit 95540ad674 ("net: ti: icssg-prueth: Add support for HSR frame
forward offload") introduced support for offloading HSR frame forwarding,
which relies on functions such as is_hsr_master() provided by the HSR
module. Although HSR provides stubs for configurations with HSR
disabled, this driver still requires an optional dependency on HSR.
Otherwise, build failures will occur when icssg-prueth is built-in
while HSR is configured as a module.
ld.lld: error: undefined symbol: is_hsr_master
>>> referenced by icssg_prueth.c:710 (drivers/net/ethernet/ti/icssg/icssg_prueth.c:710)
>>> drivers/net/ethernet/ti/icssg/icssg_prueth.o:(icssg_prueth_hsr_del_mcast) in archive vmlinux.a
>>> referenced by icssg_prueth.c:681 (drivers/net/ethernet/ti/icssg/icssg_prueth.c:681)
>>> drivers/net/ethernet/ti/icssg/icssg_prueth.o:(icssg_prueth_hsr_add_mcast) in archive vmlinux.a
>>> referenced by icssg_prueth.c:1812 (drivers/net/ethernet/ti/icssg/icssg_prueth.c:1812)
>>> drivers/net/ethernet/ti/icssg/icssg_prueth.o:(prueth_netdevice_event) in archive vmlinux.a
ld.lld: error: undefined symbol: hsr_get_port_ndev
>>> referenced by icssg_prueth.c:712 (drivers/net/ethernet/ti/icssg/icssg_prueth.c:712)
>>> drivers/net/ethernet/ti/icssg/icssg_prueth.o:(icssg_prueth_hsr_del_mcast) in archive vmlinux.a
>>> referenced by icssg_prueth.c:712 (drivers/net/ethernet/ti/icssg/icssg_prueth.c:712)
>>> drivers/net/etherneteth_hsr_del_mcast) in archive vmlinux.a
>>> referenced by icssg_prueth.c:683 (drivers/net/ethernet/ti/icssg/icssg_prueth.c:683)
>>> drivers/net/ethernet/ti/icssg/icssg_prueth.o:(icssg_prueth_hsr_add_mcast) in archive vmlinux.a
>>> referenced 1 more times
Fixes: 95540ad674 ("net: ti: icssg-prueth: Add support for HSR frame forward offload")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260207-icssg-dep-v3-1-8c47c1937f81@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d01103fdcb ]
The ID 1186:4302 is matched by both r8169 and skge. The same device ID
should not be in more than one driver, because in that case, which
driver is used is unpredictable. I downloaded the latest drivers for
all hardware revisions of the D-Link DGE-530T from D-Link's website,
and the only drivers which contain this ID are Realtek drivers.
Therefore, remove this device ID from skge.
In the kernel bug report which requested addition of this device ID,
someone created a patch to add the ID to skge. Then, it was pointed
out that this device is an "r8169 in disguise", and a patch was created
to add it to r8169. Somehow, both of these patches got merged. See the
link below.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=38862
Fixes: c074304c2b ("add pci-id for DGE-530T")
Cc: stable@vger.kernel.org
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260206071724.15268-1-enelsonmoore@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7cb37af61f ]
According to Documentation/dev-tools/kasan.rst, software KASAN modes use
compiler instrumentation to insert validity checks. Such instrumentation
might be incompatible with some parts of the kernel, and therefore needs
to be disabled, just use the attribute __no_sanitize_address to disable
instrumentation for the low level function setup_ptwalker().
Otherwise bringing up the secondary CPUs failed when CONFIG_KASAN is set
(especially when PTW is enabled), here are the call chains:
smpboot_entry()
start_secondary()
cpu_probe()
per_cpu_trap_init()
tlb_init()
setup_tlb_handler()
setup_ptwalker()
The reason is the PGD registers are configured in setup_ptwalker(), but
KASAN instrumentation may cause TLB exceptions before that.
Cc: stable@vger.kernel.org
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77403a06d8 ]
Currently, use %p to prevent leaking information about the kernel memory
layout when printing the PC address, but the kernel log messages are not
useful to debug problem if bt_address() returns 0. Given that the type of
"pc" variable is unsigned long, it should use %px to print the unmodified
unwinding address.
Cc: stable@vger.kernel.org
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2172d6ebac ]
Currently we use bottom-up allocation after sparse_init(), the reason is
sparse_init() need a lot of memory, and bottom-up allocation may exhaust
precious low memory (below 4GB). On the other hand, SWIOTLB and CMA need
low memories for DMA32, so swiotlb_init() and dma_contiguous_reserve()
need bottom-up allocation.
Since swiotlb_init() and dma_contiguous_reserve() are both called in
arch_mem_init(), we no longer need bottom-up allocation after that. So
we set the allocation policy to top-down at the end of arch_mem_init(),
in order to avoid later memory allocations (such as KASAN) exhaust low
memory.
This solve at least two problems:
1. Some buggy BIOSes use 0xfd000000~0xfe000000 for secondary CPUs, but
didn't reserve this range, which causes smpboot failures.
2. Some DMA32 devices, such as Loongson-DRM and OHCI, cannot work with
KASAN enabled.
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a9be83e57 ]
Custom target specifications are unstable, but starting with Rust 1.95.0,
`rustc` requires to explicitly pass `-Zunstable-options` to use them [1]:
error: error loading target specification: custom targets are unstable and require `-Zunstable-options`
|
= help: run `rustc --print target-list` for a list of built-in targets
David (Rust compiler team lead), writes:
"We're destabilising custom targets to allow us to move forward with
build-std without accidentally exposing functionality that we'd like
to revisit prior to committing to. I'll start a thread on Zulip to
discuss with the RfL team how we can come up with an alternative
for them."
Thus pass it.
Cc: David Wood <david@davidtw.co>
Cc: Wesley Wiser <wwiser@gmail.com>
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Link: https://github.com/rust-lang/rust/pull/151534 [1]
Reviewed-by: Gary Guo <gary@garyguo.net>
Tested-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260206204535.39431-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 96c4af4185 ]
We used to use the cifs_tcp_ses_lock to protect a lot of objects
that are not just the server, ses or tcon lists. We later introduced
srv_lock, ses_lock and tc_lock to protect fields within the
corresponding structs. This was done to provide a more granular
protection and avoid unnecessary serialization.
There were still a couple of uses of cifs_tcp_ses_lock to provide
tcon fields. In this patch, I've replaced them with tc_lock.
Cc: stable@vger.kernel.org
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9368d1ee62 ]
Commit a4e772898f ("PCI: Add missing bridge lock to pci_bus_lock()")
delegates the bridge device's pci_dev_trylock() to pci_bus_trylock() in
pci_slot_trylock(), but it forgets to remove the corresponding
pci_dev_unlock() when pci_bus_trylock() fails.
Before a4e772898f, the code did:
if (!pci_dev_trylock(dev)) /* <- lock bridge device */
goto unlock;
if (dev->subordinate) {
if (!pci_bus_trylock(dev->subordinate)) {
pci_dev_unlock(dev); /* <- unlock bridge device */
goto unlock;
}
}
After a4e772898f the bridge-device lock is no longer taken, but the
pci_dev_unlock(dev) on the failure path was left in place, leading to the
bug.
This yields one of two errors:
1. A warning that the lock is being unlocked when no one holds it.
2. An incorrect unlock of a lock that belongs to another thread.
Fix it by removing the now-redundant pci_dev_unlock(dev) on the failure
path.
[Same patch later posted by Keith at
https://patch.msgid.link/20260116184150.3013258-1-kbusch@meta.com]
Fixes: a4e772898f ("PCI: Add missing bridge lock to pci_bus_lock()")
Signed-off-by: Jinhui Guo <guojinhui.liam@bytedance.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251212145528.2555-1-guojinhui.liam@bytedance.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a70a26c9f ]
The kfd_event_page_set() function writes KFD_SIGNAL_EVENT_LIMIT * 8
bytes via memset without checking the buffer size parameter. This allows
unprivileged userspace to trigger an out-of bounds kernel memory write
by passing a small buffer, leading to potential privilege
escalation.
Signed-off-by: Sunday Clement <Sunday.Clement@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 89b831ebda ]
We need to set also write_page_raw in ecc structure to allow
choosing SW ECC instead of HW one, otherwise write operation fail.
Fixes: 08d8c62164 ("mtd: rawnand: pl353: Add support for the ARM PL353 SMC NAND controller")
Signed-off-by: Andrea Scian <andrea.scian@dave.eu>
Cc: stable@kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a52e4f2dff ]
commit 13b1f8e25b ("usb: dwc2: Force mode optimizations") removed the
dwc2_force_mode(hsotg, true) in dwc2_force_dr_mode() if dr_mode is host.
But this brings a bug: the controller fails to resume back as host,
further debugging shows that the controller is resumed as peripheral.
The reason is dwc2_force_dr_mode() missed the host mode forcing, and
when resuming from s2ram, GINTSTS is 0 by default, dwc2_is_device_mode
in dwc2_resume() misreads this as the controller is in peripheral mode.
Fix the resume failure by adding back the dwc2_force_mode(hsotg, true).
Then an obvious question is: why this bug hasn't been observed and fixed
for about six years? There are two resons: most dwc2 platforms set the
dr_mode as otg; Some platforms don't have suspend & resume support yet.
Fixes: 13b1f8e25b ("usb: dwc2: Force mode optimizations")
Cc: stable <stable@kernel.org>
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260129021534.10411-1-jszhang@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 58fbf08935 ]
When dw_pcie_iatu_setup() configures outbound address translation for both
type PCIE_ATU_TYPE_MEM and PCIE_ATU_TYPE_IO, the iATU index to use is
incremented before calling dw_pcie_prog_outbound_atu().
However for msg_atu_index, the index is not incremented before use,
causing the iATU index to be the same as the last configured iATU index,
which means that it will incorrectly use the same iATU index that is
already in use, breaking outbound address translation.
In total there are three problems with this code:
-It assigns msg_atu_index the same index that was used for the last
outbound address translation window, rather than incrementing the index
before assignment.
-The index should only be incremented (and msg_atu_index assigned) if the
use_atu_msg feature is actually requested/in use (pp->use_atu_msg is set).
-If the use_atu_msg feature is requested/in use, and there are no outbound
iATUs available, the code should return an error, as otherwise when this
this feature is used, it will use an iATU index that is out of bounds.
Fixes: e1a4ec1a95 ("PCI: dwc: Add generic MSG TLP support for sending PME_Turn_Off when system suspend")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hans Zhang <zhanghuabing@ecosda.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260127151038.1484881-6-cassel@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b85f369b81 ]
When both KASAN and SLAB_STORE_USER are enabled, accesses to
struct kasan_alloc_meta fields can be misaligned on 64-bit architectures.
This occurs because orig_size is currently defined as unsigned int,
which only guarantees 4-byte alignment. When struct kasan_alloc_meta is
placed after orig_size, it may end up at a 4-byte boundary rather than
the required 8-byte boundary on 64-bit systems.
Note that 64-bit architectures without HAVE_EFFICIENT_UNALIGNED_ACCESS
are assumed to require 64-bit accesses to be 64-bit aligned.
See HAVE_64BIT_ALIGNED_ACCESS and commit adab66b71a ("Revert:
"ring-buffer: Remove HAVE_64BIT_ALIGNED_ACCESS"") for more details.
Change orig_size from unsigned int to unsigned long to ensure proper
alignment for any subsequent metadata. This should not waste additional
memory because kmalloc objects are already aligned to at least
ARCH_KMALLOC_MINALIGN.
Closes: https://lore.kernel.org/all/aPrLF0OUK651M4dk@hyeyoo
Suggested-by: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: stable@vger.kernel.org
Fixes: 6edf2576a6 ("mm/slub: enable debugging memory wasting of kmalloc")
Signed-off-by: Harry Yoo <harry.yoo@oracle.com>
Closes: https://lore.kernel.org/all/aPrLF0OUK651M4dk@hyeyoo/
Link: https://patch.msgid.link/20260113061845.159790-2-harry.yoo@oracle.com
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8ef441811 ]
Ensure that the exception event handling work is explicitly flushed during
suspend when the runtime power management level is set to UFS_PM_LVL_0.
When the RPM level is zero, the device power mode and link state both
remain active. Previously, the UFS core driver bypassed flushing exception
event handling jobs in this configuration. This created a race condition
where the driver could attempt to access the host controller to handle an
exception after the system had already entered a deep power-down state,
resulting in a system crash.
Explicitly flush this work and disable auto BKOPs before the suspend
callback proceeds. This guarantees that pending exception tasks complete
and prevents illegal hardware access during the power-down sequence.
Fixes: 57d104c153 ("ufs: add UFS power management support")
Signed-off-by: Thomas Yen <thomasyen@google.com>
Cc: Stable Tree <stable@vger.kernel.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260129165156.956601-1-thomasyen@google.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 36c0de0257 ]
So far we've been fairly lax about accepting both unknown CMN models
(at least with a warning), and unknown revisions of those which we
do know, as although things do frequently change between releases,
typically enough remains the same to be somewhat useful for at least
some basic bringup checks. However, we also make assumptions of the
maximum supported sizes and numbers of things in various places, and
there's no guarantee that something new might not be bigger and lead
to nasty array overflows. Make sure we only try to run on things that
actually match our assumptions and so will not risk memory corruption.
We have at least always failed on completely unknown node types, so
update that error message for clarity and consistency too.
Cc: stable@vger.kernel.org
Fixes: 7819e05a0d ("perf/arm-cmn: Revamp model detection")
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 26aa529501 ]
imx_rproc_elf_find_loaded_rsc_table() may incorrectly report a loaded
resource table even when the current firmware does not provide one.
When the device tree contains a "rsc-table" entry, priv->rsc_table is
non-NULL and denotes where a resource table would be located if one is
present in memory. However, when the current firmware has no resource
table, rproc->table_ptr is NULL. The function still returns
priv->rsc_table, and the remoteproc core interprets this as a valid loaded
resource table.
Fix this by returning NULL from imx_rproc_elf_find_loaded_rsc_table() when
there is no resource table for the current firmware (i.e. when
rproc->table_ptr is NULL). This aligns the function's semantics with the
remoteproc core: a loaded resource table is only reported when a valid
table_ptr exists.
With this change, starting firmware without a resource table no longer
triggers a crash.
Fixes: e954a1bd16 ("remoteproc: imx_rproc: Use imx specific hook for find_loaded_rsc_table")
Cc: stable@vger.kernel.org
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20260129-imx-rproc-fix-v3-1-fc4e41e6e750@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 912d1c6680 ]
Commit 93bba24d4b ("btrfs: Enhance btrfs_trim_fs function to handle
error better") intended to make device trimming continue even if one
device fails, tracking failures and reporting them at the end. However,
it used 'break' instead of 'continue', causing the loop to exit on the
first device failure.
Fix this by replacing 'break' with 'continue'.
Fixes: 93bba24d4b ("btrfs: Enhance btrfs_trim_fs function to handle error better")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Robbie Ko <robbieko@synology.com>
Signed-off-by: jinbaohong <jinbaohong@synology.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
