mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2026-07-25 16:19:48 +02:00
119dcafe36795a15ae53351cbbd6177aaf94ffef
2517
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  Guillaume NaultandGreg Kroah-Hartman
|
661c63cb34 |
ipv4: Convert ip_route_input() to dscp_t.
[ Upstream commit |
||
 Kuniyuki IwashimaandGreg Kroah-Hartman
|
60bfd345cc |
bridge: Handle error of rtnl_register_module().
[ Upstream commit |
||
 Andy RoulinandGreg Kroah-Hartman
|
3453f58394 |
netfilter: br_netfilter: fix panic with metadata_dst skb
[ Upstream commit |
||
 Jonas GorskiandGreg Kroah-Hartman
|
c6c535a444 |
net: bridge: br_fdb_external_learn_add(): always set EXT_LEARN
[ Upstream commit |
||
 Florian WestphalandGreg Kroah-Hartman
|
74e6eb7fd2 |
netfilter: nf_queue: drop packets with cloned unconfirmed conntracks
[ Upstream commit |
||
 Nikolay AleksandrovandGreg Kroah-Hartman
|
e3145ca904 |
net: bridge: mcast: wait for previous gc cycles when removing port
[ Upstream commit |
||
 Elliot AyreyandGreg Kroah-Hartman
|
c43046d7e7 |
net: bridge: mst: Check vlan state for egress decision
[ Upstream commit |
||
|
Nikolay AleksandrovandGreg Kroah-Hartman
|
7caefa2771 |
net: bridge: mst: fix suspicious rcu usage in br_mst_set_state
[ Upstream commit |
||
|
Nikolay AleksandrovandGreg Kroah-Hartman
|
a6cc9e9a65 |
net: bridge: mst: pass vlan group directly to br_mst_vlan_set_state
[ Upstream commit |
||
|
Nikolay AleksandrovandGreg Kroah-Hartman
|
4488617e5e |
net: bridge: mst: fix vlan use-after-free
[ Upstream commit |
||
|
Nikolay AleksandrovandGreg Kroah-Hartman
|
1abb371147 |
net: bridge: xmit: make sure we have at least eth header len bytes
[ Upstream commit |
||
 Eric DumazetandGreg Kroah-Hartman
|
1c2b0f0823 |
net-sysfs: convert dev->operstate reads to lockless ones
[ Upstream commit |
||
 Felix FietkauandGreg Kroah-Hartman
|
1ce60741d7 |
net: bridge: fix corrupted ethernet header on multicast-to-unicast
[ Upstream commit |
||
|
Felix FietkauandGreg Kroah-Hartman
|
65fbc7a11d |
net: bridge: fix multicast-to-unicast with fraglist GSO
[ Upstream commit |
||
 Hangbin LiuandGreg Kroah-Hartman
|
7e8e0e0ea4 |
bridge/br_netlink.c: no need to return void function
[ Upstream commit |
||
 Pablo Neira AyusoandGreg Kroah-Hartman
|
3f59ac29de |
netfilter: br_netfilter: skip conntrack input hook for promisc packets
[ Upstream commit |
||
|
Eric DumazetandGreg Kroah-Hartman
|
81d51b9b7c |
netfilter: validate user input for expected length
commit |
||
|
Florian WestphalandGreg Kroah-Hartman
|
80cd0487f6 |
netfilter: bridge: confirm multicast packets before passing them up the stack
[ Upstream commit |
||
 Tobias WaldekranzandGreg Kroah-Hartman
|
a83856bd0c |
net: bridge: switchdev: Ensure deferred event delivery on unoffload
[ Upstream commit |
||
|
Tobias WaldekranzandGreg Kroah-Hartman
|
603be95437 |
net: bridge: switchdev: Skip MDB replays of deferred events on offload
[ Upstream commit |
||
 Linus LüssingandGreg Kroah-Hartman
|
d99971ec1b |
bridge: mcast: fix disabled snooping after long uptime
[ Upstream commit |
||
 Lin MaandGreg Kroah-Hartman
|
daa24d2065 |
bridge: cfm: fix enum typo in br_cc_ccm_tx_parse
[ Upstream commit |
||
 Pavel TikhomirovandGreg Kroah-Hartman
|
9325e3188a |
netfilter: bridge: replace physindev with physinif in nf_bridge_info
[ Upstream commit |
||
 Linkui XiaoandGreg Kroah-Hartman
|
5772b73098 |
netfilter: nf_conntrack_bridge: initialize err to 0
[ Upstream commit |
||
 Eric DumazetandDavid S. Miller
|
5baa0433a1 |
neighbour: fix data-races around n->output
n->output field can be read locklessly, while a writer
might change the pointer concurrently.
Add missing annotations to prevent load-store tearing.
Fixes:
|
||
 Eric DumazetandPaolo Abeni
|
44bdb313da |
net: bridge: use DEV_STATS_INC()
syzbot/KCSAN reported data-races in br_handle_frame_finish() [1]
This function can run from multiple cpus without mutual exclusion.
Adopt SMP safe DEV_STATS_INC() to update dev->stats fields.
Handles updates to dev->stats.tx_dropped while we are at it.
[1]
BUG: KCSAN: data-race in br_handle_frame_finish / br_handle_frame_finish
read-write to 0xffff8881374b2178 of 8 bytes by interrupt on cpu 1:
br_handle_frame_finish+0xd4f/0xef0 net/bridge/br_input.c:189
br_nf_hook_thresh+0x1ed/0x220
br_nf_pre_routing_finish_ipv6+0x50f/0x540
NF_HOOK include/linux/netfilter.h:304 [inline]
br_nf_pre_routing_ipv6+0x1e3/0x2a0 net/bridge/br_netfilter_ipv6.c:178
br_nf_pre_routing+0x526/0xba0 net/bridge/br_netfilter_hooks.c:508
nf_hook_entry_hookfn include/linux/netfilter.h:144 [inline]
nf_hook_bridge_pre net/bridge/br_input.c:272 [inline]
br_handle_frame+0x4c9/0x940 net/bridge/br_input.c:417
__netif_receive_skb_core+0xa8a/0x21e0 net/core/dev.c:5417
__netif_receive_skb_one_core net/core/dev.c:5521 [inline]
__netif_receive_skb+0x57/0x1b0 net/core/dev.c:5637
process_backlog+0x21f/0x380 net/core/dev.c:5965
__napi_poll+0x60/0x3b0 net/core/dev.c:6527
napi_poll net/core/dev.c:6594 [inline]
net_rx_action+0x32b/0x750 net/core/dev.c:6727
__do_softirq+0xc1/0x265 kernel/softirq.c:553
run_ksoftirqd+0x17/0x20 kernel/softirq.c:921
smpboot_thread_fn+0x30a/0x4a0 kernel/smpboot.c:164
kthread+0x1d7/0x210 kernel/kthread.c:388
ret_from_fork+0x48/0x60 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304
read-write to 0xffff8881374b2178 of 8 bytes by interrupt on cpu 0:
br_handle_frame_finish+0xd4f/0xef0 net/bridge/br_input.c:189
br_nf_hook_thresh+0x1ed/0x220
br_nf_pre_routing_finish_ipv6+0x50f/0x540
NF_HOOK include/linux/netfilter.h:304 [inline]
br_nf_pre_routing_ipv6+0x1e3/0x2a0 net/bridge/br_netfilter_ipv6.c:178
br_nf_pre_routing+0x526/0xba0 net/bridge/br_netfilter_hooks.c:508
nf_hook_entry_hookfn include/linux/netfilter.h:144 [inline]
nf_hook_bridge_pre net/bridge/br_input.c:272 [inline]
br_handle_frame+0x4c9/0x940 net/bridge/br_input.c:417
__netif_receive_skb_core+0xa8a/0x21e0 net/core/dev.c:5417
__netif_receive_skb_one_core net/core/dev.c:5521 [inline]
__netif_receive_skb+0x57/0x1b0 net/core/dev.c:5637
process_backlog+0x21f/0x380 net/core/dev.c:5965
__napi_poll+0x60/0x3b0 net/core/dev.c:6527
napi_poll net/core/dev.c:6594 [inline]
net_rx_action+0x32b/0x750 net/core/dev.c:6727
__do_softirq+0xc1/0x265 kernel/softirq.c:553
do_softirq+0x5e/0x90 kernel/softirq.c:454
__local_bh_enable_ip+0x64/0x70 kernel/softirq.c:381
__raw_spin_unlock_bh include/linux/spinlock_api_smp.h:167 [inline]
_raw_spin_unlock_bh+0x36/0x40 kernel/locking/spinlock.c:210
spin_unlock_bh include/linux/spinlock.h:396 [inline]
batadv_tt_local_purge+0x1a8/0x1f0 net/batman-adv/translation-table.c:1356
batadv_tt_purge+0x2b/0x630 net/batman-adv/translation-table.c:3560
process_one_work kernel/workqueue.c:2630 [inline]
process_scheduled_works+0x5b8/0xa30 kernel/workqueue.c:2703
worker_thread+0x525/0x730 kernel/workqueue.c:2784
kthread+0x1d7/0x210 kernel/kthread.c:388
ret_from_fork+0x48/0x60 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304
value changed: 0x00000000000d7190 -> 0x00000000000d7191
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 14848 Comm: kworker/u4:11 Not tainted 6.6.0-rc1-syzkaller-00236-gad8a69f361b9 #0
Fixes:
|
||
 Linus Torvalds
|
adfd671676 |
Merge tag 'sysctl-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull sysctl updates from Luis Chamberlain: "Long ago we set out to remove the kitchen sink on kernel/sysctl.c arrays and placings sysctls to their own sybsystem or file to help avoid merge conflicts. Matthew Wilcox pointed out though that if we're going to do that we might as well also *save* space while at it and try to remove the extra last sysctl entry added at the end of each array, a sentintel, instead of bloating the kernel by adding a new sentinel with each array moved. Doing that was not so trivial, and has required slowing down the moves of kernel/sysctl.c arrays and measuring the impact on size by each new move. The complex part of the effort to help reduce the size of each sysctl is being done by the patient work of el señor Don Joel Granados. A lot of this is truly painful code refactoring and testing and then trying to measure the savings of each move and removing the sentinels. Although Joel already has code which does most of this work, experience with sysctl moves in the past shows is we need to be careful due to the slew of odd build failures that are possible due to the amount of random Kconfig options sysctls use. To that end Joel's work is split by first addressing the major housekeeping needed to remove the sentinels, which is part of this merge request. The rest of the work to actually remove the sentinels will be done later in future kernel releases. The preliminary math is showing this will all help reduce the overall build time size of the kernel and run time memory consumed by the kernel by about ~64 bytes per array where we are able to remove each sentinel in the future. That also means there is no more bloating the kernel with the extra ~64 bytes per array moved as no new sentinels are created" * tag 'sysctl-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: sysctl: Use ctl_table_size as stopping criteria for list macro sysctl: SIZE_MAX->ARRAY_SIZE in register_net_sysctl vrf: Update to register_net_sysctl_sz networking: Update to register_net_sysctl_sz netfilter: Update to register_net_sysctl_sz ax.25: Update to register_net_sysctl_sz sysctl: Add size to register_net_sysctl function sysctl: Add size arg to __register_sysctl_init sysctl: Add size to register_sysctl sysctl: Add a size arg to __register_sysctl_table sysctl: Add size argument to init_header sysctl: Add ctl_table_size to ctl_table_header sysctl: Use ctl_table_header in list_for_each_table_entry sysctl: Prefer ctl_table_header in proc_sysctl |
||
 GONG, RuiqiandFlorian Westphal
|
a7ed3465da |
netfilter: ebtables: fix fortify warnings in size_entry_mwt()
When compiling with gcc 13 and CONFIG_FORTIFY_SOURCE=y, the following
warning appears:
In function ‘fortify_memcpy_chk’,
inlined from ‘size_entry_mwt’ at net/bridge/netfilter/ebtables.c:2118:2:
./include/linux/fortify-string.h:592:25: error: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Werror=attribute-warning]
592 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The compiler is complaining:
memcpy(&offsets[1], &entry->watchers_offset,
sizeof(offsets) - sizeof(offsets[0]));
where memcpy reads beyong &entry->watchers_offset to copy
{watchers,target,next}_offset altogether into offsets[]. Silence the
warning by wrapping these three up via struct_group().
Signed-off-by: GONG, Ruiqi <gongruiqi1@huawei.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
||
  Joel GranadosandLuis Chamberlain
|
385a5dc9e5 |
netfilter: Update to register_net_sysctl_sz
Move from register_net_sysctl to register_net_sysctl_sz for all the netfilter related files. Do this while making sure to mirror the NULL assignments with a table_size of zero for the unprivileged users. We need to move to the new function in preparation for when we change SIZE_MAX to ARRAY_SIZE() in the register_net_sysctl macro. Failing to do so would erroneously allow ARRAY_SIZE() to be called on a pointer. We hold off the SIZE_MAX to ARRAY_SIZE change until we have migrated all the relevant net sysctl registering functions to register_net_sysctl_sz in subsequent commits. Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Joel Granados <j.granados@samsung.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> |
||
  YueHaibingandJakub Kicinski
|
4d66f235c7 |
bridge: Remove unused declaration br_multicast_set_hash_max()
Since commit
|
||
 Petr MachataandDavid S. Miller
|
f2e2857b35 |
net: switchdev: Add a helper to replay objects on a bridge port
When a front panel joins a bridge via another netdevice (typically a LAG), the driver needs to learn about the objects configured on the bridge port. When the bridge port is offloaded by the driver for the first time, this can be achieved by passing a notifier to switchdev_bridge_port_offload(). The notifier is then invoked for the individual objects (such as VLANs) configured on the bridge, and can look for the interesting ones. Calling switchdev_bridge_port_offload() when the second port joins the bridge lower is unnecessary, but the replay is still needed. To that end, add a new function, switchdev_bridge_port_replay(), which does only the replay part of the _offload() function in exactly the same way as that function. Cc: Jiri Pirko <jiri@resnulli.us> Cc: Ivan Vecera <ivecera@redhat.com> Cc: Roopa Prabhu <roopa@nvidia.com> Cc: Nikolay Aleksandrov <razor@blackwall.org> Cc: bridge@lists.linux-foundation.org Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Petr MachataandDavid S. Miller
|
989280d6ea |
net: bridge: br_switchdev: Tolerate -EOPNOTSUPP when replaying MDB
There are two kinds of MDB entries to be replayed: port MDB entries, and host MDB entries. They are both replayed by br_switchdev_mdb_replay(). If the driver supports one kind, but lacks the other, the first -EOPNOTSUPP returned terminates the whole replay, including any further still-supported objects in the list. For this to cause issues, there must be MDB entries for both the host and the port being replayed. In that case, if the driver bails out from handling the host entry, the port entries are never replayed. However, the replay is currently only done when a switchdev port joins a bridge. There would be no port memberships at that point. Thus despite being erroneous, the code does not cause observable bugs. This is not an issue with other object kinds either, because there, each function replays one object kind. If a driver does not support that kind, it makes sense to bail out early. -EOPNOTSUPP is then ignored in nbp_switchdev_sync_objs(). For MDB, suppress the -EOPNOTSUPP error code in br_switchdev_mdb_replay() already, so that the whole list gets replayed. The reason we need this patch is that a future patch will introduce a replay that should be used when a front-panel port netdevice is enslaved to a bridge lower, in particular a LAG. The LAG netdevice can already have both host and port MDB entries. The port entries need to be replayed so that they are offloaded on the port that joins the LAG. Cc: Jiri Pirko <jiri@resnulli.us> Cc: Ivan Vecera <ivecera@redhat.com> Cc: Roopa Prabhu <roopa@nvidia.com> Cc: Nikolay Aleksandrov <razor@blackwall.org> Cc: bridge@lists.linux-foundation.org Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
 Ido SchimmelandDavid S. Miller
|
29cfb2aaa4 |
bridge: Add backup nexthop ID support
Add a new bridge port attribute that allows attaching a nexthop object
ID to an skb that is redirected to a backup bridge port with VLAN
tunneling enabled.
Specifically, when redirecting a known unicast packet, read the backup
nexthop ID from the bridge port that lost its carrier and set it in the
bridge control block of the skb before forwarding it via the backup
port. Note that reading the ID from the bridge port should not result in
a cache miss as the ID is added next to the 'backup_port' field that was
already accessed. After this change, the 'state' field still stays on
the first cache line, together with other data path related fields such
as 'flags and 'vlgrp':
struct net_bridge_port {
struct net_bridge * br; /* 0 8 */
struct net_device * dev; /* 8 8 */
netdevice_tracker dev_tracker; /* 16 0 */
struct list_head list; /* 16 16 */
long unsigned int flags; /* 32 8 */
struct net_bridge_vlan_group * vlgrp; /* 40 8 */
struct net_bridge_port * backup_port; /* 48 8 */
u32 backup_nhid; /* 56 4 */
u8 priority; /* 60 1 */
u8 state; /* 61 1 */
u16 port_no; /* 62 2 */
/* --- cacheline 1 boundary (64 bytes) --- */
[...]
} __attribute__((__aligned__(8)));
When forwarding an skb via a bridge port that has VLAN tunneling
enabled, check if the backup nexthop ID stored in the bridge control
block is valid (i.e., not zero). If so, instead of attaching the
pre-allocated metadata (that only has the tunnel key set), allocate a
new metadata, set both the tunnel key and the nexthop object ID and
attach it to the skb.
By default, do not dump the new attribute to user space as a value of
zero is an invalid nexthop object ID.
The above is useful for EVPN multihoming. When one of the links
composing an Ethernet Segment (ES) fails, traffic needs to be redirected
towards the host via one of the other ES peers. For example, if a host
is multihomed to three different VTEPs, the backup port of each ES link
needs to be set to the VXLAN device and the backup nexthop ID needs to
point to an FDB nexthop group that includes the IP addresses of the
other two VTEPs. The VXLAN driver will extract the ID from the metadata
of the redirected skb, calculate its flow hash and forward it towards
one of the other VTEPs. If the ID does not exist, or represents an
invalid nexthop object, the VXLAN driver will drop the skb. This
relieves the bridge driver from the need to validate the ID.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
||
 Vladimir OlteanandDavid S. Miller
|
6ca3c005d0 |
net: bridge: keep ports without IFF_UNICAST_FLT in BR_PROMISC mode
According to the synchronization rules for .ndo_get_stats() as seen in
Documentation/networking/netdevices.rst, acquiring a plain spin_lock()
should not be illegal, but the bridge driver implementation makes it so.
After running these commands, I am being faced with the following
lockdep splat:
$ ip link add link swp0 name macsec0 type macsec encrypt on && ip link set swp0 up
$ ip link add dev br0 type bridge vlan_filtering 1 && ip link set br0 up
$ ip link set macsec0 master br0 && ip link set macsec0 up
========================================================
WARNING: possible irq lock inversion dependency detected
6.4.0-04295-g31b577b4bd4a #603 Not tainted
--------------------------------------------------------
swapper/1/0 just changed the state of lock:
ffff6bd348724cd8 (&br->lock){+.-.}-{3:3}, at: br_forward_delay_timer_expired+0x34/0x198
but this lock took another, SOFTIRQ-unsafe lock in the past:
(&ocelot->stats_lock){+.+.}-{3:3}
and interrupts could create inverse lock ordering between them.
other info that might help us debug this:
Chain exists of:
&br->lock --> &br->hash_lock --> &ocelot->stats_lock
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&ocelot->stats_lock);
local_irq_disable();
lock(&br->lock);
lock(&br->hash_lock);
<Interrupt>
lock(&br->lock);
*** DEADLOCK ***
(details about the 3 locks skipped)
swp0 is instantiated by drivers/net/dsa/ocelot/felix.c, and this
only matters to the extent that its .ndo_get_stats64() method calls
spin_lock(&ocelot->stats_lock).
Documentation/locking/lockdep-design.rst says:
| A lock is irq-safe means it was ever used in an irq context, while a lock
| is irq-unsafe means it was ever acquired with irq enabled.
(...)
| Furthermore, the following usage based lock dependencies are not allowed
| between any two lock-classes::
|
| <hardirq-safe> -> <hardirq-unsafe>
| <softirq-safe> -> <softirq-unsafe>
Lockdep marks br->hash_lock as softirq-safe, because it is sometimes
taken in softirq context (for example br_fdb_update() which runs in
NET_RX softirq), and when it's not in softirq context it blocks softirqs
by using spin_lock_bh().
Lockdep marks ocelot->stats_lock as softirq-unsafe, because it never
blocks softirqs from running, and it is never taken from softirq
context. So it can always be interrupted by softirqs.
There is a call path through which a function that holds br->hash_lock:
fdb_add_hw_addr() will call a function that acquires ocelot->stats_lock:
ocelot_port_get_stats64(). This can be seen below:
ocelot_port_get_stats64+0x3c/0x1e0
felix_get_stats64+0x20/0x38
dsa_slave_get_stats64+0x3c/0x60
dev_get_stats+0x74/0x2c8
rtnl_fill_stats+0x4c/0x150
rtnl_fill_ifinfo+0x5cc/0x7b8
rtmsg_ifinfo_build_skb+0xe4/0x150
rtmsg_ifinfo+0x5c/0xb0
__dev_notify_flags+0x58/0x200
__dev_set_promiscuity+0xa0/0x1f8
dev_set_promiscuity+0x30/0x70
macsec_dev_change_rx_flags+0x68/0x88
__dev_set_promiscuity+0x1a8/0x1f8
__dev_set_rx_mode+0x74/0xa8
dev_uc_add+0x74/0xa0
fdb_add_hw_addr+0x68/0xd8
fdb_add_local+0xc4/0x110
br_fdb_add_local+0x54/0x88
br_add_if+0x338/0x4a0
br_add_slave+0x20/0x38
do_setlink+0x3a4/0xcb8
rtnl_newlink+0x758/0x9d0
rtnetlink_rcv_msg+0x2f0/0x550
netlink_rcv_skb+0x128/0x148
rtnetlink_rcv+0x24/0x38
the plain English explanation for it is:
The macsec0 bridge port is created without p->flags & BR_PROMISC,
because it is what br_manage_promisc() decides for a VLAN filtering
bridge with a single auto port.
As part of the br_add_if() procedure, br_fdb_add_local() is called for
the MAC address of the device, and this results in a call to
dev_uc_add() for macsec0 while the softirq-safe br->hash_lock is taken.
Because macsec0 does not have IFF_UNICAST_FLT, dev_uc_add() ends up
calling __dev_set_promiscuity() for macsec0, which is propagated by its
implementation, macsec_dev_change_rx_flags(), to the lower device: swp0.
This triggers the call path:
dev_set_promiscuity(swp0)
-> rtmsg_ifinfo()
-> dev_get_stats()
-> ocelot_port_get_stats64()
with a calling context that lockdep doesn't like (br->hash_lock held).
Normally we don't see this, because even though many drivers that can be
bridge ports don't support IFF_UNICAST_FLT, we need a driver that
(a) doesn't support IFF_UNICAST_FLT, *and*
(b) it forwards the IFF_PROMISC flag to another driver, and
(c) *that* driver implements ndo_get_stats64() using a softirq-unsafe
spinlock.
Condition (b) is necessary because the first __dev_set_rx_mode() calls
__dev_set_promiscuity() with "bool notify=false", and thus, the
rtmsg_ifinfo() code path won't be entered.
The same criteria also hold true for DSA switches which don't report
IFF_UNICAST_FLT. When the DSA master uses a spin_lock() in its
ndo_get_stats64() method, the same lockdep splat can be seen.
I think the deadlock possibility is real, even though I didn't reproduce
it, and I'm thinking of the following situation to support that claim:
fdb_add_hw_addr() runs on a CPU A, in a context with softirqs locally
disabled and br->hash_lock held, and may end up attempting to acquire
ocelot->stats_lock.
In parallel, ocelot->stats_lock is currently held by a thread B (say,
ocelot_check_stats_work()), which is interrupted while holding it by a
softirq which attempts to lock br->hash_lock.
Thread B cannot make progress because br->hash_lock is held by A. Whereas
thread A cannot make progress because ocelot->stats_lock is held by B.
When taking the issue at face value, the bridge can avoid that problem
by simply making the ports promiscuous from a code path with a saner
calling context (br->hash_lock not held). A bridge port without
IFF_UNICAST_FLT is going to become promiscuous as soon as we call
dev_uc_add() on it (which we do unconditionally), so why not be
preemptive and make it promiscuous right from the beginning, so as to
not be taken by surprise.
With this, we've broken the links between code that holds br->hash_lock
or br->lock and code that calls into the ndo_change_rx_flags() or
ndo_get_stats64() ops of the bridge port.
Fixes:
|
||
|
Ido SchimmelandJakub Kicinski
|
7b4858df3b |
skbuff: bridge: Add layer 2 miss indication
For EVPN non-DF (Designated Forwarder) filtering we need to be able to
prevent decapsulated traffic from being flooded to a multi-homed host.
Filtering of multicast and broadcast traffic can be achieved using the
following flower filter:
# tc filter add dev bond0 egress pref 1 proto all flower indev vxlan0 dst_mac 01:00:00:00:00:00/01:00:00:00:00:00 action drop
Unlike broadcast and multicast traffic, it is not currently possible to
filter unknown unicast traffic. The classification into unknown unicast
is performed by the bridge driver, but is not visible to other layers
such as tc.
Solve this by adding a new 'l2_miss' bit to the tc skb extension. Clear
the bit whenever a packet enters the bridge (received from a bridge port
or transmitted via the bridge) and set it if the packet did not match an
FDB or MDB entry. If there is no skb extension and the bit needs to be
cleared, then do not allocate one as no extension is equivalent to the
bit being cleared. The bit is not set for broadcast packets as they
never perform a lookup and therefore never incur a miss.
A bit that is set for every flooded packet would also work for the
current use case, but it does not allow us to differentiate between
registered and unregistered multicast traffic, which might be useful in
the future.
To keep the performance impact to a minimum, the marking of packets is
guarded by the 'tc_skb_ext_tc' static key. When 'false', the skb is not
touched and an skb extension is not allocated. Instead, only a
5 bytes nop is executed, as demonstrated below for the call site in
br_handle_frame().
Before the patch:
```
memset(skb->cb, 0, sizeof(struct br_input_skb_cb));
c37b09: 49 c7 44 24 28 00 00 movq $0x0,0x28(%r12)
c37b10: 00 00
p = br_port_get_rcu(skb->dev);
c37b12: 49 8b 44 24 10 mov 0x10(%r12),%rax
memset(skb->cb, 0, sizeof(struct br_input_skb_cb));
c37b17: 49 c7 44 24 30 00 00 movq $0x0,0x30(%r12)
c37b1e: 00 00
c37b20: 49 c7 44 24 38 00 00 movq $0x0,0x38(%r12)
c37b27: 00 00
```
After the patch (when static key is disabled):
```
memset(skb->cb, 0, sizeof(struct br_input_skb_cb));
c37c29: 49 c7 44 24 28 00 00 movq $0x0,0x28(%r12)
c37c30: 00 00
c37c32: 49 8d 44 24 28 lea 0x28(%r12),%rax
c37c37: 48 c7 40 08 00 00 00 movq $0x0,0x8(%rax)
c37c3e: 00
c37c3f: 48 c7 40 10 00 00 00 movq $0x0,0x10(%rax)
c37c46: 00
#ifdef CONFIG_HAVE_JUMP_LABEL_HACK
static __always_inline bool arch_static_branch(struct static_key *key, bool branch)
{
asm_volatile_goto("1:"
c37c47: 0f 1f 44 00 00 nopl 0x0(%rax,%rax,1)
br_tc_skb_miss_set(skb, false);
p = br_port_get_rcu(skb->dev);
c37c4c: 49 8b 44 24 10 mov 0x10(%r12),%rax
```
Subsequent patches will extend the flower classifier to be able to match
on the new 'l2_miss' bit and enable / disable the static key when
filters that match on it are added / deleted.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
 Arnd BergmannandJakub Kicinski
|
89dcd87ce5 |
bridge: always declare tunnel functions
When CONFIG_BRIDGE_VLAN_FILTERING is disabled, two functions are still defined but have no prototype or caller. This causes a W=1 warning for the missing prototypes: net/bridge/br_netlink_tunnel.c:29:6: error: no previous prototype for 'vlan_tunid_inrange' [-Werror=missing-prototypes] net/bridge/br_netlink_tunnel.c:199:5: error: no previous prototype for 'br_vlan_tunnel_info' [-Werror=missing-prototypes] The functions are already contitional on CONFIG_BRIDGE_VLAN_FILTERING, and I coulnd't easily figure out the right set of #ifdefs, so just move the declarations out of the #ifdef to avoid the warning, at a small cost in code size over a more elaborate fix. Fixes: |
||
|
Eric DumazetandDavid S. Miller
|
4063384ef7 |
net: add vlan_get_protocol_and_depth() helper
Before blamed commit, pskb_may_pull() was used instead of skb_header_pointer() in __vlan_get_protocol() and friends. Few callers depended on skb->head being populated with MAC header, syzbot caught one of them (skb_mac_gso_segment()) Add vlan_get_protocol_and_depth() to make the intent clearer and use it where sensible. This is a more generic fix than commit |
||
|
Ido SchimmelandDavid S. Miller
|
160656d720 |
bridge: Allow setting per-{Port, VLAN} neighbor suppression state
Add a new bridge port attribute that allows user space to enable
per-{Port, VLAN} neighbor suppression. Example:
# bridge -d -j -p link show dev swp1 | jq '.[]["neigh_vlan_suppress"]'
false
# bridge link set dev swp1 neigh_vlan_suppress on
# bridge -d -j -p link show dev swp1 | jq '.[]["neigh_vlan_suppress"]'
true
# bridge link set dev swp1 neigh_vlan_suppress off
# bridge -d -j -p link show dev swp1 | jq '.[]["neigh_vlan_suppress"]'
false
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
||
|
Ido SchimmelandDavid S. Miller
|
83f6d60079 |
bridge: vlan: Allow setting VLAN neighbor suppression state
Add a new VLAN attribute that allows user space to set the neighbor suppression state of the port VLAN. Example: # bridge -d -j -p vlan show dev swp1 vid 10 | jq '.[]["vlans"][]["neigh_suppress"]' false # bridge vlan set vid 10 dev swp1 neigh_suppress on # bridge -d -j -p vlan show dev swp1 vid 10 | jq '.[]["vlans"][]["neigh_suppress"]' true # bridge vlan set vid 10 dev swp1 neigh_suppress off # bridge -d -j -p vlan show dev swp1 vid 10 | jq '.[]["vlans"][]["neigh_suppress"]' false # bridge vlan set vid 10 dev br0 neigh_suppress on Error: bridge: Can't set neigh_suppress for non-port vlans. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Ido SchimmelandDavid S. Miller
|
412614b145 |
bridge: Add per-{Port, VLAN} neighbor suppression data path support
When the bridge is not VLAN-aware (i.e., VLAN ID is 0), determine if
neighbor suppression is enabled on a given bridge port solely based on
the existing 'BR_NEIGH_SUPPRESS' flag.
Otherwise, if the bridge is VLAN-aware, first check if per-{Port, VLAN}
neighbor suppression is enabled on the given bridge port using the
'BR_NEIGH_VLAN_SUPPRESS' flag. If so, look up the VLAN and check whether
it has neighbor suppression enabled based on the per-VLAN
'BR_VLFLAG_NEIGH_SUPPRESS_ENABLED' flag.
If the bridge is VLAN-aware, but the bridge port does not have
per-{Port, VLAN} neighbor suppression enabled, then fallback to
determine neighbor suppression based on the 'BR_NEIGH_SUPPRESS' flag.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
||
|
Ido SchimmelandDavid S. Miller
|
3aca683e06 |
bridge: Encapsulate data path neighbor suppression logic
Currently, there are various places in the bridge data path that check
whether neighbor suppression is enabled on a given bridge port.
As a preparation for per-{Port, VLAN} neighbor suppression, encapsulate
this logic in a function and pass the VLAN ID of the packet as an
argument.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
||
|
Ido SchimmelandDavid S. Miller
|
6be42ed0a5 |
bridge: Take per-{Port, VLAN} neighbor suppression into account
The bridge driver gates the neighbor suppression code behind an internal
per-bridge flag called 'BROPT_NEIGH_SUPPRESS_ENABLED'. The flag is set
when at least one bridge port has neighbor suppression enabled.
As a preparation for per-{Port, VLAN} neighbor suppression, make sure
the global flag is also set if per-{Port, VLAN} neighbor suppression is
enabled. That is, when the 'BR_NEIGH_VLAN_SUPPRESS' flag is set on at
least one bridge port.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
||
|
Ido SchimmelandDavid S. Miller
|
a714e3ec23 |
bridge: Add internal flags for per-{Port, VLAN} neighbor suppression
Add two internal flags that will be used to enable / disable per-{Port,
VLAN} neighbor suppression:
1. 'BR_NEIGH_VLAN_SUPPRESS': A per-port flag used to indicate that
per-{Port, VLAN} neighbor suppression is enabled on the bridge port.
When set, 'BR_NEIGH_SUPPRESS' has no effect.
2. 'BR_VLFLAG_NEIGH_SUPPRESS_ENABLED': A per-VLAN flag used to indicate
that neighbor suppression is enabled on the given VLAN.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
||
|
Ido SchimmelandDavid S. Miller
|
e408336a69 |
bridge: Pass VLAN ID to br_flood()
Subsequent patches are going to add per-{Port, VLAN} neighbor
suppression, which will require br_flood() to potentially suppress ARP /
NS packets on a per-{Port, VLAN} basis.
As a preparation, pass the VLAN ID of the packet as another argument to
br_flood().
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
||
|
Ido SchimmelandDavid S. Miller
|
013a7ce81d |
bridge: Reorder neighbor suppression check when flooding
The bridge does not flood ARP / NS packets for which a reply was sent to
bridge ports that have neighbor suppression enabled.
Subsequent patches are going to add per-{Port, VLAN} neighbor
suppression, which is going to make it more expensive to check whether
neighbor suppression is enabled since a VLAN lookup will be required.
Therefore, instead of unnecessarily performing this lookup for every
packet, only perform it for ARP / NS packets for which a reply was sent.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
||
|
Jakub Kicinski
|
681c5b51dc |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Adjacent changes: net/mptcp/protocol.h |
||
|
Vladimir OlteanandPaolo Abeni
|
927cdea5d2 |
net: bridge: switchdev: don't notify FDB entries with "master dynamic"
There is a structural problem in switchdev, where the flag bits in
struct switchdev_notifier_fdb_info (added_by_user, is_local etc) only
represent a simplified / denatured view of what's in struct
net_bridge_fdb_entry :: flags (BR_FDB_ADDED_BY_USER, BR_FDB_LOCAL etc).
Each time we want to pass more information about struct
net_bridge_fdb_entry :: flags to struct switchdev_notifier_fdb_info
(here, BR_FDB_STATIC), we find that FDB entries were already notified to
switchdev with no regard to this flag, and thus, switchdev drivers had
no indication whether the notified entries were static or not.
For example, this command:
ip link add br0 type bridge && ip link set swp0 master br0
bridge fdb add dev swp0 00:01:02:03:04:05 master dynamic
has never worked as intended with switchdev. It causes a struct
net_bridge_fdb_entry to be passed to br_switchdev_fdb_notify() which has
a single flag set: BR_FDB_ADDED_BY_USER.
This is further passed to the switchdev notifier chain, where interested
drivers have no choice but to assume this is a static (does not age) and
sticky (does not migrate) FDB entry. So currently, all drivers offload
it to hardware as such, as can be seen below ("offload" is set).
bridge fdb get 00:01:02:03:04:05 dev swp0 master
00:01:02:03:04:05 dev swp0 offload master br0
The software FDB entry expires $ageing_time centiseconds after the
kernel last sees a packet with this MAC SA, and the bridge notifies its
deletion as well, so it eventually disappears from hardware too.
This is a problem, because it is actually desirable to start offloading
"master dynamic" FDB entries correctly - they should expire $ageing_time
centiseconds after the *hardware* port last sees a packet with this
MAC SA - and this is how the current incorrect behavior was discovered.
With an offloaded data plane, it can be expected that software only sees
exception path packets, so an otherwise active dynamic FDB entry would
be aged out by software sooner than it should.
With the change in place, these FDB entries are no longer offloaded:
bridge fdb get 00:01:02:03:04:05 dev swp0 master
00:01:02:03:04:05 dev swp0 master br0
and this also constitutes a better way (assuming a backport to stable
kernels) for user space to determine whether the kernel has the
capability of doing something sane with these or not.
As opposed to "master dynamic" FDB entries, on the current behavior of
which no one currently depends on (which can be deduced from the lack of
kselftests), Ido Schimmel explains that entries with the "extern_learn"
flag (BR_FDB_ADDED_BY_EXT_LEARN) should still be notified to switchdev,
since the spectrum driver listens to them (and this is kind of okay,
because although they are treated identically to "static", they are
expected to not age, and to roam).
Fixes:
|
||
|
Florian WestphalandPablo Neira Ayuso
|
94623f579c |
netfilter: br_netfilter: fix recent physdev match breakage
Recent attempt to ensure PREROUTING hook is executed again when a
decrypted ipsec packet received on a bridge passes through the network
stack a second time broke the physdev match in INPUT hook.
We can't discard the nf_bridge info strct from sabotage_in hook, as
this is needed by the physdev match.
Keep the struct around and handle this with another conditional instead.
Fixes:
|
||
 Thomas GleixnerandJakub Kicinski
|
bc9d3a9f2a |
net: dst: Switch to rcuref_t reference counting
Under high contention dst_entry::__refcnt becomes a significant bottleneck. atomic_inc_not_zero() is implemented with a cmpxchg() loop, which goes into high retry rates on contention. Switch the reference count to rcuref_t which results in a significant performance gain. Rename the reference count member to __rcuref to reflect the change. The gain depends on the micro-architecture and the number of concurrent operations and has been measured in the range of +25% to +130% with a localhost memtier/memcached benchmark which amplifies the problem massively. Running the memtier/memcached benchmark over a real (1Gb) network connection the conversion on top of the false sharing fix for struct dst_entry::__refcnt results in a total gain in the 2%-5% range over the upstream baseline. Reported-by: Wangyang Guo <wangyang.guo@intel.com> Reported-by: Arjan Van De Ven <arjan.van.de.ven@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20230307125538.989175656@linutronix.de Link: https://lore.kernel.org/r/20230323102800.215027837@linutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Ido SchimmelandDavid S. Miller
|
da654c80a0 |
rtnetlink: bridge: mcast: Relax group address validation in common code
In the upcoming VXLAN MDB implementation, the 0.0.0.0 and :: MDB entries will act as catchall entries for unregistered IP multicast traffic in a similar fashion to the 00:00:00:00:00:00 VXLAN FDB entry that is used to transmit BUM traffic. In deployments where inter-subnet multicast forwarding is used, not all the VTEPs in a tenant domain are members in all the broadcast domains. It is therefore advantageous to transmit BULL (broadcast, unknown unicast and link-local multicast) and unregistered IP multicast traffic on different tunnels. If the same tunnel was used, a VTEP only interested in IP multicast traffic would also pull all the BULL traffic and drop it as it is not a member in the originating broadcast domain [1]. Prepare for this change by allowing the 0.0.0.0 group address in the common rtnetlink MDB code and forbid it in the bridge driver. A similar change is not needed for IPv6 because the common code only validates that the group address is not the all-nodes address. [1] https://datatracker.ietf.org/doc/html/draft-ietf-bess-evpn-irb-mcast#section-2.6 Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net> |