The IT66122 is a pin compatible replacement for the IT66122. Based on
empirical testing, the new device looks to be compatible with IT66121.
However due to a lack of public data sheet at this time beyond overall
feature list[1] (which seems to add additional features vs ITT66121),
it is hard to determine that additional register operations required
to enable additional features.
So, introduce the device as a new compatible that we will detect based
on vid/pid match, with explicit id that can be used to extend the
driver capability as information becomes available later on.
[1] https://www.ite.com.tw/en/product/cate1/IT66122
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251029150636.3118628-6-nm@ti.com
The driver knows exactly which version of the chip is present since
the vid/pid is used to enforce a compatibility. Given that some
devices like IT66121 has potentially been replaced with IT66122 mid
production for many platforms, it makes no sense to use the vid/pid
as an enforcement for compatibility. Instead, detect the ID of the
actual chip in use by matching the corresponding vid/pid and drop the
compatible specific lookup table.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251029150636.3118628-5-nm@ti.com
drm-misc-next for v6.19:
UAPI Changes:
Cross-subsystem Changes:
- fbcon cleanups.
- Make drivers depend on FB_TILEBLITTING instead of selecting it,
and hide FB_MODE_HELPERS.
Core Changes:
- More preparations for rust.
- Throttle dirty worker with vblank
- Use drm_for_each_bridge_in_chain_scoped in drm's bridge code and
assorted fixes.
- Ensure drm_client_modeset tests are enabled in UML.
- Rename ttm_bo_put to ttm_bo_fini, as a further step in removing the
TTM bo refcount.
- Add POST_LT_ADJ_REQ training sequence.
- Show list of removed but still allocated bridges.
- Add a simulated vblank interrupt for hardware without it,
and add some helpers to use them in vkms and hypervdrm.
Driver Changes:
- Assorted small fixes, cleanups and updates to host1x, tegra,
panthor, amdxdna, gud, vc4, ssd130x, ivpu, panfrost, panthor,
sysfb, bridge/sn65dsi86, solomon, ast, tidss.
- Convert drivers from using .round_rate() to .determine_rate()
- Add support for KD116N3730A07/A12, chromebook mt8189, JT101TM023,
LQ079L1SX01, raspberrypi 5" panels.
- Improve reclocking on tegra186+ with nouveau.
- Improve runtime pm in amdxdna.
- Add support for HTX_PAI in imx.
- Use a helper to calculate dumb buffer sizes in most drivers.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/b412fb91-8545-466a-8102-d89c0f2758a7@linux.intel.com
Currently the TIMER_BASE_CONFIG0 register gets initialized to a fixed
value as initially found in vendor driver code supporting the RK3588
SoC. As a matter of fact the value matches the rate of the HDMI TX
reference clock, which is roughly 428.57 MHz.
However, on RK3576 SoC that rate is slightly lower, i.e. 396.00 MHz, and
the incorrect register configuration breaks CEC functionality.
Set the timer base according to the actual reference clock rate that
shall be provided by the platform driver. Otherwise fallback to the
vendor default.
While at it, also drop the unnecessary empty lines in
dw_hdmi_qp_init_hw().
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250903-rk3588-hdmi-cec-v4-2-fa25163c4b08@collabora.com
There is now a new LT9211 rev. U5, which reports chip ID 0x18 0x01 0xe4 .
The previous LT9211 reported chip ID 0x18 0x01 0xe3 , which is what the
driver checks for right now. Since there is a possibility there will be
yet another revision of the LT9211 in the future, drop the last version
nibble check to allow all future revisions of the chip to work with this
driver.
This fix makes LT9211 rev. U5 work with this driver.
Fixes: 8ce4129e3d ("drm/bridge: lt9211: Add Lontium LT9211 bridge driver")
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251011110017.12521-1-marek.vasut@mailbox.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Pull drm updates from Dave Airlie:
"cross-subsystem:
- i2c-hid: Make elan touch controllers power on after panel is
enabled
- dt bindings for STM32MP25 SoC
- pci vgaarb: use screen_info helpers
- rust pin-init updates
- add MEI driver for late binding firmware update/load
uapi:
- add ioctl for reassigning GEM handles
- provide boot_display attribute on boot-up devices
core:
- document DRM_MODE_PAGE_FLIP_EVENT
- add vendor specific recovery method to drm device wedged uevent
gem:
- Simplify gpuvm locking
ttm:
- add interface to populate buffers
sched:
- Fix race condition in trace code
atomic:
- Reallow no-op async page flips
display:
- dp: Fix command length
video:
- Improve pixel-format handling for struct screen_info
rust:
- drop Opaque<> from ioctl args
- Alloc:
- BorrowedPage type and AsPageIter traits
- Implement Vmalloc::to_page() and VmallocPageIter
- DMA/Scatterlist:
- Add dma::DataDirection and type alias for dma_addr_t
- Abstraction for struct scatterlist and sg_table
- DRM:
- simplify use of generics
- add DriverFile type alias
- drop Object::SIZE
- Rust:
- pin-init tree merge
- Various methods for AsBytes and FromBytes traits
gpuvm:
- Support madvice in Xe driver
gpusvm:
- fix hmm_pfn_to_map_order usage in gpusvm
bridge:
- Improve and fix ref counting on bridge management
- cdns-dsi: Various improvements to mode setting
- Support Solomon SSD2825 plus DT bindings
- Support Waveshare DSI2DPI plus DT bindings
- Support Content Protection property
- display-connector: Improve DP display detection
- Add support for Radxa Ra620 plus DT bindings
- adv7511: Provide SPD and HDMI infoframes
- it6505: Replace crypto_shash with sha()
- synopsys: Add support for DW DPTX Controller plus DT bindings
- adv7511: Write full Audio infoframe
- ite6263: Support vendor-specific infoframes
- simple: Add support for Realtek RTD2171 DP-to-HDMI plus DT bindings
panel:
- panel-edp: Support mt8189 Chromebooks; Support BOE NV140WUM-N64;
Support SHP LQ134Z1; Fixes
- panel-simple: Support Olimex LCD-OLinuXino-5CTS plus DT bindings
- Support Samsung AMS561RA01
- Support Hydis HV101HD1 plus DT bindings
- ilitek-ili9881c: Refactor mode setting; Add support for Bestar
BSD1218-A101KL68 LCD plus DT bindings
- lvds: Add support for Ampire AMP19201200B5TZQW-T03 to DT bindings
- edp: Add support for additonal mt8189 Chromebook panels
- lvds: Add DT bindings for EDT ETML0700Z8DHA
amdgpu:
- add CRIU support for gem objects
- RAS updates
- VCN SRAM load fixes
- EDID read fixes
- eDP ALPM support
- Documentation updates
- Rework PTE flag generation
- DCE6 fixes
- VCN devcoredump cleanup
- MMHUB client id fixes
- VCN 5.0.1 RAS support
- SMU 13.0.x updates
- Expanded PCIe DPC support
- Expanded VCN reset support
- VPE per queue reset support
- give kernel jobs unique id for tracing
- pre-populate exported buffers
- cyan skillfish updates
- make vbios build number available in sysfs
- userq updates
- HDCP updates
- support MMIO remap page as ttm pool
- JPEG parser updates
- DCE6 DC updates
- use devm for i2c buses
- GPUVM locking updates
- Drop non-DC DCE11 code
- improve fallback handling for pixel encoding
amdkfd:
- SVM/page migration fixes
- debugfs fixes
- add CRIO support for gem objects
- SVM updates
radeon:
- use dev_warn_once in CS parsers
xe:
- add madvise interface
- add DRM_IOCTL_XE_VM_QUERY_MEMORY_RANGE_ATTRS to query VMA count
and memory attributes
- drop L# bank mask reporting from media GT3 on Xe3+.
- add SLPC power_profile sysfs interface
- add configs attribs to add post/mid context-switch commands
- handle firmware reported hardware errors notifying userspace with
device wedged uevent
- use same dir structure across sysfs/debugfs
- cleanup and future proof vram region init
- add G-states and PCI link states to debugfs
- Add SRIOV support for CCS surfaces on Xe2+
- Enable SRIOV PF mode by default on supported platforms
- move flush to common code
- extended core workarounds for Xe2/3
- use DRM scheduler for delayed GT TLB invalidations
- configs improvements and allow VF device enablement
- prep work to expose mmio regions to userspace
- VF migration support added
- prepare GPU SVM for THP migration
- start fixing XE_PAGE_SIZE vs PAGE_SIZE
- add PSMI support for hw validation
- resize VF bars to max possible size according to number of VFs
- Ensure GT is in C0 during resume
- pre-populate exported buffers
- replace xe_hmm with gpusvm
- add more SVM GT stats to debugfs
- improve fake pci and WA kunnit handle for new platform testing
- Test GuC to GuC comms to add debugging
- use attribute groups to simplify sysfs registration
- add Late Binding firmware code to interact with MEI
i915:
- apply multiple JSL/EHL/Gen7/Gen6 workarounds properly
- protect against overflow in active_engine()
- Use try_cmpxchg64() in __active_lookup()
- include GuC registers in error state
- get rid of dev->struct_mutex
- iopoll: generalize read_poll_timout
- lots more display refactoring
- Reject HBR3 in any eDP Panel
- Prune modes for YUV420
- Display Wa fix, additions, and updates
- DP: Fix 2.7 Gbps link training on g4x
- DP: Adjust the idle pattern handling
- DP: Shuffle the link training code a bit
- Don't set/read the DSI C clock divider on GLK
- Enable_psr kernel parameter changes
- Type-C enabled/disconnected dp-alt sink
- Wildcat Lake enabling
- DP HDR updates
- DRAM detection
- wait PSR idle on dsb commit
- Remove FBC modulo 4 restriction for ADL-P+
- panic: refactor framebuffer allocation
habanalabs:
- debug/visibility improvements
- vmalloc-backed coherent mmap support
- HLDIO infrastructure
nova-core:
- various register!() macro improvements
- minor vbios/firmware fixes/refactoring
- advance firmware boot stages; process Booter and patch signatures
- process GSP and GSP bootloader
- Add r570.144 firmware bindings and update to it
- Move GSP boot code to own module
- Use new pin-init features to store driver's private data in a
single allocation
- Update ARef import from sync::aref
nova-drm:
- Update ARef import from sync::aref
tyr:
- initial driver skeleton for a rust driver for ARM Mali GPUs
- capable of powering up, query metadata and provide it to userspace.
msm:
- GPU and Core:
- in DT bindings describe clocks per GPU type
- GMU bandwidth voting for x1-85
- a623/a663 speedbins
- cleanup some remaining no-iommu leftovers after VM_BIND conversion
- fix GEM obj 32b size truncation
- add missing VM_BIND param validation
- IFPC for x1-85 and a750
- register xml and gen_header.py sync from mesa
- Display:
- add missing bindings for display on SC8180X
- added DisplayPort MST bindings
- conversion from round_rate() to determine_rate()
amdxdna:
- add IOCTL_AMDXDNA_GET_ARRAY
- support user space allocated buffers
- streamline PM interfaces
- Refactoring wrt. hardware contexts
- improve error reporting
nouveau:
- use GSP firmware by default
- improve error reporting
- Pre-populate exported buffers
ast:
- Clean up detection of DRAM config
exynos:
- add DSIM bridge driver support for Exynos7870
- Document Exynos7870 DSIM compatible in dt-binding
panthor:
- Print task/pid on errors
- Add support for Mali G710, G510, G310, Gx15, Gx20, Gx25
- Improve cache flushing
- Fail VM bind if BO has offset
renesas:
- convert to RUNTIME_PM_OPS
rcar-du:
- Make number of lanes configurable
- Use RUNTIME_PM_OPS
- Add support for DSI commands
rocket:
- Add driver for Rockchip NPU plus DT bindings
- Use kfree() and sizeof() correctly
- Test DMA status
rockchip:
- dsi2: Add support for RK3576 plus DT bindings
- Add support for RK3588 DPTX output
tidss:
- Use crtc_ fields for programming display mode
- Remove other drivers from aperture
pixpaper:
- Add support for Mayqueen Pixpaper plus DT bindings
v3d:
- Support querying nubmer of GPU resets for KHR_robustness
stm:
- Clean up logging
- ltdc: Add support support for STM32MP257F-EV1 plus DT bindings
sitronix:
- st7571-i2c: Add support for inverted displays and 2-bit grayscale
tidss:
- Convert to kernel's FIELD_ macros
vesadrm:
- Support 8-bit palette mode
imagination:
- Improve power management
- Add support for TH1520 GPU
- Support Risc-V architectures
v3d:
- Improve job management and locking
vkms:
- Support variants of ARGB8888, ARGB16161616, RGB565, RGB888 and P01x
- Spport YUV with 16-bit components"
* tag 'drm-next-2025-10-01' of https://gitlab.freedesktop.org/drm/kernel: (1455 commits)
drm/amd: Add name to modes from amdgpu_connector_add_common_modes()
drm/amd: Drop some common modes from amdgpu_connector_add_common_modes()
drm/amdgpu: update MODULE_PARM_DESC for freesync_video
drm/amd: Use dynamic array size declaration for amdgpu_connector_add_common_modes()
drm/amd/display: Share dce100_validate_global with DCE6-8
drm/amd/display: Share dce100_validate_bandwidth with DCE6-8
drm/amdgpu: Fix fence signaling race condition in userqueue
amd/amdkfd: enhance kfd process check in switch partition
amd/amdkfd: resolve a race in amdgpu_amdkfd_device_fini_sw
drm/amd/display: Reject modes with too high pixel clock on DCE6-10
drm/amd: Drop unnecessary check in amdgpu_connector_add_common_modes()
drm/amd/display: Only enable common modes for eDP and LVDS
drm/amdgpu: remove the redeclaration of variable i
drm/amdgpu/userq: assign an error code for invalid userq va
drm/amdgpu: revert "rework reserved VMID handling" v2
drm/amdgpu: remove leftover from enforcing isolation by VMID
drm/amdgpu: Add fallback to pipe reset if KCQ ring reset fails
accel/habanalabs: add Infineon version check
accel/habanalabs/gaudi2: read preboot status after recovering from dirty state
accel/habanalabs: add HL_GET_P_STATE passthrough type
...
The HDMI TX Parallel Audio Interface (HTX_PAI) is a digital module that
acts as the bridge between the Audio Subsystem to the HDMI TX Controller.
This IP block is found in the HDMI subsystem of the i.MX8MP SoC.
Data received from the audio subsystem can have an arbitrary component
ordering. The HTX_PAI block has integrated muxing options to select which
sections of the 32-bit input data word will be mapped to each IEC60958
field. The HTX_PAI_FIELD_CTRL register contains mux selects to
individually select P,C,U,V,Data, and Preamble.
Use component helper so that imx8mp-hdmi-tx will be aggregate driver,
imx8mp-hdmi-pai will be component driver, then imx8mp-hdmi-pai can use
bind() ops to get the plat_data from imx8mp-hdmi-tx device.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://lore.kernel.org/r/20250923053001.2678596-6-shengjiu.wang@nxp.com
Add support for Exynos7870's DSIM IP block in the bridge driver.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Presently, all devices refer to clock names from a single array. The
only controlling parameter is the number of clocks (num_clks field of
samsung_dsim_driver_data) which uses the first n clocks of that array.
As new devices are added, this approach turns out to be cumbersome.
Separate the clock names in individual arrays required by each variant,
in a struct clk_bulk_data. Add a pointer field to the driver data struct
which points to their respective clock names, and rework the clock usage
code to use the clk_bulk_* API instead.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Exynos7870's DSIM requires more time to stabilize its PLL. The current
timeout value, 1000, doesn't suffice. Increase the value to 3000, which
is just about enough as observed experimentally.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The PLL_STABLE bit of DSIM_DPHY_STATUS is hardcoded to BIT(31), but
Exynos7870's DSIM has it in BIT(24) as per downstream kernel sources.
In order to support both, move this bit value to the driver data struct
and define it for every driver compatible. Reference the value from
there instead, in functions wherever required.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Currently, PLL_P offset of DSIM_PLLCTRL is configurable in the driver
data, while PLL_M and PLL_S offsets are hardcoded as 4-bit and 1-bit
offsets respectively, but Exynos7870's DSIM have them at 3-bit and 0-bit
offsets as per downstream kernel sources.
In order to support both, move both offset values to the driver data
struct and define it for every driver compatible. Reference the values
from there instead, in functions wherever required.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The VIDEO_MODE bit of DSIM_CONFIG is hardcoded to BIT(25), but
Exynos7870's DSIM has it in BIT(18) as per downstream kernel sources.
In order to support both, move this bit value to the driver data struct
and define it for every driver compatible. Reference the value from
there instead, in functions wherever required.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The MAIN_VSA offset of DSIM_MSYNC is hardcoded to a 22-bit offset, but
Exynos7870's DSIM has it in a 16-bit offset as per the downstream kernel
sources.
In order to support both, move this offset value to the driver data
struct and define it for every driver compatible. Reference the value
from there instead, in functions wherever required.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
DSIM_CLKCTRL bit and offset values hardcoded in the driver:
name | bit/offset value
--------------------------+-----------------
DSIM_LANE_ESC_CLK_EN_CLK | 19
DSIM_LANE_ESC_CLK_EN_DATA | 20
DSIM_BYTE_CLKEN | 24
DSIM_ESC_CLKEN | 28
DSIM_TX_REQUEST_HSCLK | 31
DSIM_CLKCTRL bit and offset values in Exynos7870 DSIM as per downstream
kernel sources:
name | bit/offset value
--------------------------+-----------------
DSIM_LANE_ESC_CLK_EN_CLK | 8
DSIM_LANE_ESC_CLK_EN_DATA | 9
DSIM_BYTE_CLKEN | 17
DSIM_ESC_CLKEN | 16
DSIM_TX_REQUEST_HSCLK | 20
In order to support both, move all values to the driver data struct and
define it for every driver compatible. Reference the values from there
instead, in functions wherever required.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Exynos7870's DSIM device doesn't require waiting for the header FIFO
during a MIPI DSI transfer. Add a flag in the driver data in order to
control said behavior.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com
On Exynos7870 devices, enabling the display requires disabling
standby by writing to the SFRCTRL register. Add the register and related
bit values. Since this behavior isn't available on other SoCs, implement
a flag in the driver data struct indicating the availability of this
feature.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Exynos7870's DSIM has separate registers for LINK and DPHY status. This
is in contrast to older variants in the driver which use a single
register for both.
Add a driver data flag which indicates that the device variant supports
the legacy status register. Change the register read calls
appropriately.
Suggested-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The bridge has three bootstrap pins which are sampled to determine the
frequency of the external reference clock. The driver will also
(over)write that setting. But it seems this is racy after the bridge is
enabled. It was observed that although the driver write the correct
value (by sniffing on the I2C bus), the register has the wrong value.
The datasheet states that the GPIO lines have to be stable for at least
5us after asserting the EN signal. Thus, there seems to be some logic
which samples the GPIO lines and this logic appears to overwrite the
register value which was set by the driver. Waiting 20us after
asserting the EN line resolves this issue.
Fixes: a095f15c00 ("drm/bridge: add support for sn65dsi86 bridge driver")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250821122341.1257286-1-mwalle@kernel.org
The DW DP TX Controller is compliant with the DisplayPort Specification
Version 1.4 with the following features:
* DisplayPort 1.4a
* Main Link: 1/2/4 lanes
* Main Link Support 1.62Gbps, 2.7Gbps, 5.4Gbps and 8.1Gbps
* AUX channel 1Mbps
* Single Stream Transport(SST)
* Multistream Transport (MST)
* Type-C support (alternate mode)
* HDCP 2.2, HDCP 1.3
* Supports up to 8/10 bits per color component
* Supports RBG, YCbCr4:4:4, YCbCr4:2:2, YCbCr4:2:0
* Pixel clock up to 594MHz
* I2S, SPDIF audio interface
Add library with common helpers to make it can be shared with
other SoC.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250822063959.692098-3-andyshrk@163.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Ettore Chimenti
Nishanth Menon
Maud Spierings
Cristian Ciocaltea
Luca Ceresoli
Simona Vetter
Thomas Zimmermann
Marek Vasut
Linus Torvalds
Shengjiu Wang
Dave Airlie
John Ripple
Liu Ying
Qi Xi
Loic Poulain
Kaustabh Chakraborty
Geert Uytterhoeven
Dmitry Baryshkov
Neil Armstrong
Nathan Chancellor
Eric Biggers
Michael Walle
Andy Yan
Hsin-Yi Wang