[ Upstream commit 896880ff30 ]
Replace deprecated 0-length array in struct bpf_lpm_trie_key with
flexible array. Found with GCC 13:
../kernel/bpf/lpm_trie.c:207:51: warning: array subscript i is outside array bounds of 'const __u8[0]' {aka 'const unsigned char[]'} [-Warray-bounds=]
207 | *(__be16 *)&key->data[i]);
| ^~~~~~~~~~~~~
../include/uapi/linux/swab.h:102:54: note: in definition of macro '__swab16'
102 | #define __swab16(x) (__u16)__builtin_bswap16((__u16)(x))
| ^
../include/linux/byteorder/generic.h:97:21: note: in expansion of macro '__be16_to_cpu'
97 | #define be16_to_cpu __be16_to_cpu
| ^~~~~~~~~~~~~
../kernel/bpf/lpm_trie.c:206:28: note: in expansion of macro 'be16_to_cpu'
206 | u16 diff = be16_to_cpu(*(__be16 *)&node->data[i]
^
| ^~~~~~~~~~~
In file included from ../include/linux/bpf.h:7:
../include/uapi/linux/bpf.h:82:17: note: while referencing 'data'
82 | __u8 data[0]; /* Arbitrary size */
| ^~~~
And found at run-time under CONFIG_FORTIFY_SOURCE:
UBSAN: array-index-out-of-bounds in kernel/bpf/lpm_trie.c:218:49
index 0 is out of range for type '__u8 [*]'
Changing struct bpf_lpm_trie_key is difficult since has been used by
userspace. For example, in Cilium:
struct egress_gw_policy_key {
struct bpf_lpm_trie_key lpm_key;
__u32 saddr;
__u32 daddr;
};
While direct references to the "data" member haven't been found, there
are static initializers what include the final member. For example,
the "{}" here:
struct egress_gw_policy_key in_key = {
.lpm_key = { 32 + 24, {} },
.saddr = CLIENT_IP,
.daddr = EXTERNAL_SVC_IP & 0Xffffff,
};
To avoid the build time and run time warnings seen with a 0-sized
trailing array for struct bpf_lpm_trie_key, introduce a new struct
that correctly uses a flexible array for the trailing bytes,
struct bpf_lpm_trie_key_u8. As part of this, include the "header"
portion (which is just the "prefixlen" member), so it can be used
by anything building a bpf_lpr_trie_key that has trailing members that
aren't a u8 flexible array (like the self-test[1]), which is named
struct bpf_lpm_trie_key_hdr.
Unfortunately, C++ refuses to parse the __struct_group() helper, so
it is not possible to define struct bpf_lpm_trie_key_hdr directly in
struct bpf_lpm_trie_key_u8, so we must open-code the union directly.
Adjust the kernel code to use struct bpf_lpm_trie_key_u8 through-out,
and for the selftest to use struct bpf_lpm_trie_key_hdr. Add a comment
to the UAPI header directing folks to the two new options.
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Closes: https://paste.debian.net/hidden/ca500597/
Link: https://lore.kernel.org/all/202206281009.4332AA33@keescook/ [1]
Link: https://lore.kernel.org/bpf/20240222155612.it.533-kees@kernel.org
Stable-dep-of: 59f2f84117 ("bpf: Avoid kfree_rcu() under lock in bpf_lpm_trie.")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 9a2fa14720 upstream.
copy_fd_bitmaps(new, old, count) is expected to copy the first
count/BITS_PER_LONG bits from old->full_fds_bits[] and fill
the rest with zeroes. What it does is copying enough words
(BITS_TO_LONGS(count/BITS_PER_LONG)), then memsets the rest.
That works fine, *if* all bits past the cutoff point are
clear. Otherwise we are risking garbage from the last word
we'd copied.
For most of the callers that is true - expand_fdtable() has
count equal to old->max_fds, so there's no open descriptors
past count, let alone fully occupied words in ->open_fds[],
which is what bits in ->full_fds_bits[] correspond to.
The other caller (dup_fd()) passes sane_fdtable_size(old_fdt, max_fds),
which is the smallest multiple of BITS_PER_LONG that covers all
opened descriptors below max_fds. In the common case (copying on
fork()) max_fds is ~0U, so all opened descriptors will be below
it and we are fine, by the same reasons why the call in expand_fdtable()
is safe.
Unfortunately, there is a case where max_fds is less than that
and where we might, indeed, end up with junk in ->full_fds_bits[] -
close_range(from, to, CLOSE_RANGE_UNSHARE) with
* descriptor table being currently shared
* 'to' being above the current capacity of descriptor table
* 'from' being just under some chunk of opened descriptors.
In that case we end up with observably wrong behaviour - e.g. spawn
a child with CLONE_FILES, get all descriptors in range 0..127 open,
then close_range(64, ~0U, CLOSE_RANGE_UNSHARE) and watch dup(0) ending
up with descriptor #128, despite #64 being observably not open.
The minimally invasive fix would be to deal with that in dup_fd().
If this proves to add measurable overhead, we can go that way, but
let's try to fix copy_fd_bitmaps() first.
* new helper: bitmap_copy_and_expand(to, from, bits_to_copy, size).
* make copy_fd_bitmaps() take the bitmap size in words, rather than
bits; it's 'count' argument is always a multiple of BITS_PER_LONG,
so we are not losing any information, and that way we can use the
same helper for all three bitmaps - compiler will see that count
is a multiple of BITS_PER_LONG for the large ones, so it'll generate
plain memcpy()+memset().
Reproducer added to tools/testing/selftests/core/close_range_test.c
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4d2868b5d1 upstream.
It should be quite uncommon to set both the subflow and the signal
flags: the initiator of the connection is typically the one creating new
subflows, not the other peer, then no need to announce additional local
addresses, and use it to create subflows.
But some people might be confused about the flags, and set both "just to
be sure at least the right one is set". To verify the previous fix, and
avoid future regressions, this specific case is now validated: the
client announces a new address, and initiates a new subflow from the
same address.
While working on this, another bug has been noticed, where the client
reset the new subflow because an ADD_ADDR echo got received as the 3rd
ACK: this new test also explicitly checks that no RST have been sent by
the client and server.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 86e39e0448 ("mptcp: keep track of local endpoint still available for each msk")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-7-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ No conflicts, but not using 'chk_add_nr 1 1 0 invert': in this
version, 'chk_add_nr' cannot be used with 'invert': d73bb9d3957b
("selftests: mptcp: join: ability to invert ADD_ADDR check") is not in
this version, and backporting it causes a lot of conflicts. That's
fine, checking that there is an additional subflow should be enough. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f833470c27 upstream.
Before the previous commit, 'signal' endpoints with the 'backup' flag
were ignored when sending the MP_JOIN.
The MPTCP Join selftest has then been modified to validate this case:
the "single address, backup" test, is now validating the MP_JOIN with a
backup flag as it is what we expect it to do with such name. The
previous version has been kept, but renamed to "single address, switch
to backup" to avoid confusions.
The "single address with port, backup" test is also now validating the
MPJ with a backup flag, which makes more sense than checking the switch
to backup with an MP_PRIO.
The "mpc backup both sides" test is now validating that the backup flag
is also set in MP_JOIN from and to the addresses used in the initial
subflow, using the special ID 0.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 4596a2c1b7 ("mptcp: allow creating non-backup subflows")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
[ Conflicts in mptcp_join.sh because 'run_tests' helper has been
modified in multiple commits that are not in this version, e.g. commit
e571fb09c8 ("selftests: mptcp: add speed env var"). Adaptations
have been made to use the old way, similar to what is done around. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 935ff5bb8a upstream.
A peer can notify the other one that a subflow has to be treated as
"backup" by two different ways: either by sending a dedicated MP_PRIO
notification, or by setting the backup flag in the MP_JOIN handshake.
The selftests were previously monitoring the former, but not the latter.
This is what is now done here by looking at these new MIB counters when
validating the 'backup' cases:
MPTcpExtMPJoinSynBackupRx
MPTcpExtMPJoinSynAckBackupRx
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it will help to validate a new fix for an issue introduced by this
commit ID.
Fixes: 4596a2c1b7 ("mptcp: allow creating non-backup subflows")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
[ Conflicts in mptcp_join.sh because the check are done has changed,
e.g. in commit 03668c65d1 ("selftests: mptcp: join: rework detailed
report"), or commit 985de45923 ("selftests: mptcp: centralize stats
dumping"), etc. Adaptations have been made to use the old way, similar
to what is done just above. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2ed08e4bc5 ]
On a 8-socket server the TSC is wrongly marked as 'unstable' and disabled
during boot time on about one out of 120 boot attempts:
clocksource: timekeeping watchdog on CPU227: wd-tsc-wd excessive read-back delay of 153560ns vs. limit of 125000ns,
wd-wd read-back delay only 11440ns, attempt 3, marking tsc unstable
tsc: Marking TSC unstable due to clocksource watchdog
TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'.
sched_clock: Marking unstable (119294969739, 159204297)<-(125446229205, -5992055152)
clocksource: Checking clocksource tsc synchronization from CPU 319 to CPUs 0,99,136,180,210,542,601,896.
clocksource: Switched to clocksource hpet
The reason is that for platform with a large number of CPUs, there are
sporadic big or huge read latencies while reading the watchog/clocksource
during boot or when system is under stress work load, and the frequency and
maximum value of the latency goes up with the number of online CPUs.
The cCurrent code already has logic to detect and filter such high latency
case by reading the watchdog twice and checking the two deltas. Due to the
randomness of the latency, there is a low probabilty that the first delta
(latency) is big, but the second delta is small and looks valid. The
watchdog code retries the readouts by default twice, which is not
necessarily sufficient for systems with a large number of CPUs.
There is a command line parameter 'max_cswd_read_retries' which allows to
increase the number of retries, but that's not user friendly as it needs to
be tweaked per system. As the number of required retries is proportional to
the number of online CPUs, this parameter can be calculated at runtime.
Scale and enlarge the number of retries according to the number of online
CPUs and remove the command line parameter completely.
[ tglx: Massaged change log and comments ]
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jin Wang <jin1.wang@intel.com>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20240221060859.1027450-1-feng.tang@intel.com
Stable-dep-of: f2655ac2c0 ("clocksource: Fix brown-bag boolean thinko in cs_watchdog_read()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 189f1a976e ]
For all these years libbpf's BTF dumper has been emitting not strictly
valid syntax for function prototypes that have no input arguments.
Instead of `int (*blah)()` we should emit `int (*blah)(void)`.
This is not normally a problem, but it manifests when we get kfuncs in
vmlinux.h that have no input arguments. Due to compiler internal
specifics, we get no BTF information for such kfuncs, if they are not
declared with proper `(void)`.
The fix is trivial. We also need to adjust a few ancient tests that
happily assumed `()` is correct.
Fixes: 351131b51c ("libbpf: add btf_dump API for BTF-to-C conversion")
Reported-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/bpf/20240712224442.282823-1-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 17c743b9da upstream.
Building the sigaltstack test with GCC on 64-bit powerpc errors with:
gcc -Wall sas.c -o /home/michael/linux/.build/kselftest/sigaltstack/sas
In file included from sas.c:23:
current_stack_pointer.h:22:2: error: #error "implement current_stack_pointer equivalent"
22 | #error "implement current_stack_pointer equivalent"
| ^~~~~
sas.c: In function ‘my_usr1’:
sas.c:50:13: error: ‘sp’ undeclared (first use in this function); did you mean ‘p’?
50 | if (sp < (unsigned long)sstack ||
| ^~
This happens because GCC doesn't define __ppc__ for 64-bit builds, only
32-bit builds. Instead use __powerpc__ to detect powerpc builds, which
is defined by clang and GCC for 64-bit and 32-bit builds.
Fixes: 05107edc91 ("selftests: sigaltstack: fix -Wuninitialized")
Cc: stable@vger.kernel.org # v6.3+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240520062647.688667-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f036e68212 ]
The TOS value that is returned to user space in the route get reply is
the one with which the lookup was performed ('fl4->flowi4_tos'). This is
fine when the matched route is configured with a TOS as it would not
match if its TOS value did not match the one with which the lookup was
performed.
However, matching on TOS is only performed when the route's TOS is not
zero. It is therefore possible to have the kernel incorrectly return a
non-zero TOS:
# ip link add name dummy1 up type dummy
# ip address add 192.0.2.1/24 dev dummy1
# ip route get fibmatch 192.0.2.2 tos 0xfc
192.0.2.0/24 tos 0x1c dev dummy1 proto kernel scope link src 192.0.2.1
Fix by instead returning the DSCP field from the FIB result structure
which was populated during the route lookup.
Output after the patch:
# ip link add name dummy1 up type dummy
# ip address add 192.0.2.1/24 dev dummy1
# ip route get fibmatch 192.0.2.2 tos 0xfc
192.0.2.0/24 dev dummy1 proto kernel scope link src 192.0.2.1
Extend the existing selftests to not only verify that the correct route
is returned, but that it is also returned with correct "tos" value (or
without it).
Fixes: b61798130f ("net: ipv4: RTM_GETROUTE: return matched fib result when requested")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f67a90a0c8 ]
Lately, an additional locking was added by commit c0a40097f0
("drivers: core: synchronize really_probe() and dev_uevent()"). The
locking protects dev_uevent() calling. This function is used to send
messages from the kernel to user space. Uevent messages notify user space
about changes in device states, such as when a device is added, removed,
or changed. These messages are used by udev (or other similar user-space
tools) to apply device-specific rules.
After reloading devlink instance, udev events should be processed. This
locking causes a short delay of udev events handling.
One example for useful udev rule is renaming ports. 'forwading.config'
can be configured to use names after udev rules are applied. Some tests run
devlink_reload() and immediately use the updated names. This worked before
the above mentioned commit was pushed, but now the delay of uevent messages
causes that devlink_reload() returns before udev events are handled and
tests fail.
Adjust devlink_reload() to not assume that udev events are already
processed when devlink reload is done, instead, wait for udev events to
ensure they are processed before returning from the function.
Without this patch:
TESTS='rif_mac_profile' ./resource_scale.sh
TEST: 'rif_mac_profile' 4 [ OK ]
sysctl: cannot stat /proc/sys/net/ipv6/conf/swp1/disable_ipv6: No such file or directory
sysctl: cannot stat /proc/sys/net/ipv6/conf/swp1/disable_ipv6: No such file or directory
sysctl: cannot stat /proc/sys/net/ipv6/conf/swp2/disable_ipv6: No such file or directory
sysctl: cannot stat /proc/sys/net/ipv6/conf/swp2/disable_ipv6: No such file or directory
Cannot find device "swp1"
Cannot find device "swp2"
TEST: setup_wait_dev (: Interface swp1 does not come up.) [FAIL]
With this patch:
$ TESTS='rif_mac_profile' ./resource_scale.sh
TEST: 'rif_mac_profile' 4 [ OK ]
TEST: 'rif_mac_profile' overflow 5 [ OK ]
This is relevant not only for this test.
Fixes: bc7cbb1e9f ("selftests: forwarding: Add devlink_lib.sh")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/89367666e04b38a8993027f1526801ca327ab96a.1720709333.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 75d8d7a630 ]
ACLs that reside in the algorithmic TCAM (A-TCAM) in Spectrum-2 and
newer ASICs can share the same mask if their masks only differ in up to
8 consecutive bits. For example, consider the following filters:
# tc filter add dev swp1 ingress pref 1 proto ip flower dst_ip 192.0.2.0/24 action drop
# tc filter add dev swp1 ingress pref 1 proto ip flower dst_ip 198.51.100.128/25 action drop
The second filter can use the same mask as the first (dst_ip/24) with a
delta of 1 bit.
However, the above only works because the two filters have different
values in the common unmasked part (dst_ip/24). When entries have the
same value in the common unmasked part they create undesired collisions
in the device since many entries now have the same key. This leads to
firmware errors such as [1] and to a reduced scale.
Fix by adjusting the hash table key to only include the value in the
common unmasked part. That is, without including the delta bits. That
way the driver will detect the collision during filter insertion and
spill the filter into the circuit TCAM (C-TCAM).
Add a test case that fails without the fix and adjust existing cases
that check C-TCAM spillage according to the above limitation.
[1]
mlxsw_spectrum2 0000:06:00.0: EMAD reg access failed (tid=3379b18a00003394,reg_id=3027(ptce3),type=write,status=8(resource not available))
Fixes: c22291f7cf ("mlxsw: spectrum: acl: Implement delta for ERP")
Reported-by: Alexander Zubkov <green@qrator.net>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Tested-by: Alexander Zubkov <green@qrator.net>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c8d7598df ]
bpf_prog5 and bpf_prog7 are removed from progs/test_sockmap_kern.h in
commit d79a32129b ("bpf: Selftests, remove prints from sockmap tests"),
now there are only 9 progs in it, not 11:
SEC("sk_skb1")
int bpf_prog1(struct __sk_buff *skb)
SEC("sk_skb2")
int bpf_prog2(struct __sk_buff *skb)
SEC("sk_skb3")
int bpf_prog3(struct __sk_buff *skb)
SEC("sockops")
int bpf_sockmap(struct bpf_sock_ops *skops)
SEC("sk_msg1")
int bpf_prog4(struct sk_msg_md *msg)
SEC("sk_msg2")
int bpf_prog6(struct sk_msg_md *msg)
SEC("sk_msg3")
int bpf_prog8(struct sk_msg_md *msg)
SEC("sk_msg4")
int bpf_prog9(struct sk_msg_md *msg)
SEC("sk_msg5")
int bpf_prog10(struct sk_msg_md *msg)
This patch updates the array sizes of prog_fd[], prog_attach_type[] and
prog_type[] from 11 to 9 accordingly.
Fixes: d79a32129b ("bpf: Selftests, remove prints from sockmap tests")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/9c10d9f974f07fcb354a43a8eca67acb2fafc587.1715926605.git.tanggeliang@kylinos.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73810cd45b ]
When building with clang, via:
make LLVM=1 -C tools/testing/selftests
...there are several warnings, and an error. This fixes all of those and
allows these tests to run and pass.
1. Fix linker error (undefined reference to memcpy) by providing a local
version of memcpy.
2. clang complains about using this form:
if (g = h & 0xf0000000)
...so factor out the assignment into a separate step.
3. The code is passing a signed const char* to elf_hash(), which expects
a const unsigned char *. There are several callers, so fix this at
the source by allowing the function to accept a signed argument, and
then converting to unsigned operations, once inside the function.
4. clang doesn't have __attribute__((externally_visible)) and generates
a warning to that effect. Fortunately, gcc 12 and gcc 13 do not seem
to require that attribute in order to build, run and pass tests here,
so remove it.
Reviewed-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Edward Liaw <edliaw@google.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cb708ab9f5 ]
It's slightly better to set _GNU_SOURCE in the source code, but if one
must do it via the compiler invocation, then the best way to do so is
this:
$(CC) -D_GNU_SOURCE=
...because otherwise, if this form is used:
$(CC) -D_GNU_SOURCE
...then that leads the compiler to set a value, as if you had passed in:
$(CC) -D_GNU_SOURCE=1
That, in turn, leads to warnings under both gcc and clang, like this:
futex_requeue_pi.c:20: warning: "_GNU_SOURCE" redefined
Fix this by using the "-D_GNU_SOURCE=" form.
Reviewed-by: Edward Liaw <edliaw@google.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84b6df4c49 ]
Fix warnings like:
openat2_test.c: In function ‘test_openat2_flags’:
openat2_test.c:303:73: warning: format ‘%llX’ expects argument of type
‘long long unsigned int’, but argument 5 has type ‘__u64’ {aka ‘long
unsigned int’} [-Wformat=]
By switching to unsigned long long for u64 for ppc64 builds.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 6715df8d5d upstream.
This commits updates the following functions to allow reads from
uninitialized stack locations when env->allow_uninit_stack option is
enabled:
- check_stack_read_fixed_off()
- check_stack_range_initialized(), called from:
- check_stack_read_var_off()
- check_helper_mem_access()
Such change allows to relax logic in stacksafe() to treat STACK_MISC
and STACK_INVALID in a same way and make the following stack slot
configurations equivalent:
| Cached state | Current state |
| stack slot | stack slot |
|------------------+------------------|
| STACK_INVALID or | STACK_INVALID or |
| STACK_MISC | STACK_SPILL or |
| | STACK_MISC or |
| | STACK_ZERO or |
| | STACK_DYNPTR |
This leads to significant verification speed gains (see below).
The idea was suggested by Andrii Nakryiko [1] and initial patch was
created by Alexei Starovoitov [2].
Currently the env->allow_uninit_stack is allowed for programs loaded
by users with CAP_PERFMON or CAP_SYS_ADMIN capabilities.
A number of test cases from verifier/*.c were expecting uninitialized
stack access to be an error. These test cases were updated to execute
in unprivileged mode (thus preserving the tests).
The test progs/test_global_func10.c expected "invalid indirect read
from stack" error message because of the access to uninitialized
memory region. This error is no longer possible in privileged mode.
The test is updated to provoke an error "invalid indirect access to
stack" because of access to invalid stack address (such error is not
verified by progs/test_global_func*.c series of tests).
The following tests had to be removed because these can't be made
unprivileged:
- verifier/sock.c:
- "sk_storage_get(map, skb->sk, &stack_value, 1): partially init
stack_value"
BPF_PROG_TYPE_SCHED_CLS programs are not executed in unprivileged mode.
- verifier/var_off.c:
- "indirect variable-offset stack access, max_off+size > max_initialized"
- "indirect variable-offset stack access, uninitialized"
These tests verify that access to uninitialized stack values is
detected when stack offset is not a constant. However, variable
stack access is prohibited in unprivileged mode, thus these tests
are no longer valid.
* * *
Here is veristat log comparing this patch with current master on a
set of selftest binaries listed in tools/testing/selftests/bpf/veristat.cfg
and cilium BPF binaries (see [3]):
$ ./veristat -e file,prog,states -C -f 'states_pct<-30' master.log current.log
File Program States (A) States (B) States (DIFF)
-------------------------- -------------------------- ---------- ---------- ----------------
bpf_host.o tail_handle_ipv6_from_host 349 244 -105 (-30.09%)
bpf_host.o tail_handle_nat_fwd_ipv4 1320 895 -425 (-32.20%)
bpf_lxc.o tail_handle_nat_fwd_ipv4 1320 895 -425 (-32.20%)
bpf_sock.o cil_sock4_connect 70 48 -22 (-31.43%)
bpf_sock.o cil_sock4_sendmsg 68 46 -22 (-32.35%)
bpf_xdp.o tail_handle_nat_fwd_ipv4 1554 803 -751 (-48.33%)
bpf_xdp.o tail_lb_ipv4 6457 2473 -3984 (-61.70%)
bpf_xdp.o tail_lb_ipv6 7249 3908 -3341 (-46.09%)
pyperf600_bpf_loop.bpf.o on_event 287 145 -142 (-49.48%)
strobemeta.bpf.o on_event 15915 4772 -11143 (-70.02%)
strobemeta_nounroll2.bpf.o on_event 17087 3820 -13267 (-77.64%)
xdp_synproxy_kern.bpf.o syncookie_tc 21271 6635 -14636 (-68.81%)
xdp_synproxy_kern.bpf.o syncookie_xdp 23122 6024 -17098 (-73.95%)
-------------------------- -------------------------- ---------- ---------- ----------------
Note: I limited selection by states_pct<-30%.
Inspection of differences in pyperf600_bpf_loop behavior shows that
the following patch for the test removes almost all differences:
- a/tools/testing/selftests/bpf/progs/pyperf.h
+ b/tools/testing/selftests/bpf/progs/pyperf.h
@ -266,8 +266,8 @ int __on_event(struct bpf_raw_tracepoint_args *ctx)
}
if (event->pthread_match || !pidData->use_tls) {
- void* frame_ptr;
- FrameData frame;
+ void* frame_ptr = 0;
+ FrameData frame = {};
Symbol sym = {};
int cur_cpu = bpf_get_smp_processor_id();
W/o this patch the difference comes from the following pattern
(for different variables):
static bool get_frame_data(... FrameData *frame ...)
{
...
bpf_probe_read_user(&frame->f_code, ...);
if (!frame->f_code)
return false;
...
bpf_probe_read_user(&frame->co_name, ...);
if (frame->co_name)
...;
}
int __on_event(struct bpf_raw_tracepoint_args *ctx)
{
FrameData frame;
...
get_frame_data(... &frame ...) // indirectly via a bpf_loop & callback
...
}
SEC("raw_tracepoint/kfree_skb")
int on_event(struct bpf_raw_tracepoint_args* ctx)
{
...
ret |= __on_event(ctx);
ret |= __on_event(ctx);
...
}
With regards to value `frame->co_name` the following is important:
- Because of the conditional `if (!frame->f_code)` each call to
__on_event() produces two states, one with `frame->co_name` marked
as STACK_MISC, another with it as is (and marked STACK_INVALID on a
first call).
- The call to bpf_probe_read_user() does not mark stack slots
corresponding to `&frame->co_name` as REG_LIVE_WRITTEN but it marks
these slots as BPF_MISC, this happens because of the following loop
in the check_helper_call():
for (i = 0; i < meta.access_size; i++) {
err = check_mem_access(env, insn_idx, meta.regno, i, BPF_B,
BPF_WRITE, -1, false);
if (err)
return err;
}
Note the size of the write, it is a one byte write for each byte
touched by a helper. The BPF_B write does not lead to write marks
for the target stack slot.
- Which means that w/o this patch when second __on_event() call is
verified `if (frame->co_name)` will propagate read marks first to a
stack slot with STACK_MISC marks and second to a stack slot with
STACK_INVALID marks and these states would be considered different.
[1] https://lore.kernel.org/bpf/CAEf4BzY3e+ZuC6HUa8dCiUovQRg2SzEk7M-dSkqNZyn=xEmnPA@mail.gmail.com/
[2] https://lore.kernel.org/bpf/CAADnVQKs2i1iuZ5SUGuJtxWVfGYR9kDgYKhq3rNV+kBLQCu7rA@mail.gmail.com/
[3] git@github.com:anakryiko/cilium.git
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Co-developed-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230219200427.606541-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Maxim Mikityanskiy <maxim@isovalent.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit af2b7e5b74 ]
In selftests/net/msg_zerocopy.c, it has a while loop keeps calling sendmsg
on a socket with MSG_ZEROCOPY flag, and it will recv the notifications
until the socket is not writable. Typically, it will start the receiving
process after around 30+ sendmsgs. However, as the introduction of commit
dfa2f04833 ("tcp: get rid of sysctl_tcp_adv_win_scale"), the sender is
always writable and does not get any chance to run recv notifications.
The selftest always exits with OUT_OF_MEMORY because the memory used by
opt_skb exceeds the net.core.optmem_max. Meanwhile, it could be set to a
different value to trigger OOM on older kernels too.
Thus, we introduce "cfg_notification_limit" to force sender to receive
notifications after some number of sendmsgs.
Fixes: 07b65c5b31 ("test: add msg_zerocopy test")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Signed-off-by: Xiaochun Lu <xiaochun.lu@bytedance.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240701225349.3395580-2-zijianzhang@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 14bb1e8c8d ]
Recently, I frequently hit the following test failure:
[root@arch-fb-vm1 bpf]# ./test_progs -n 33/1
test_lookup_update:PASS:skel_open 0 nsec
[...]
test_lookup_update:PASS:sync_rcu 0 nsec
test_lookup_update:FAIL:map1_leak inner_map1 leaked!
#33/1 btf_map_in_map/lookup_update:FAIL
#33 btf_map_in_map:FAIL
In the test, after map is closed and then after two rcu grace periods,
it is assumed that map_id is not available to user space.
But the above assumption cannot be guaranteed. After zero or one
or two rcu grace periods in different siturations, the actual
freeing-map-work is put into a workqueue. Later on, when the work
is dequeued, the map will be actually freed.
See bpf_map_put() in kernel/bpf/syscall.c.
By using workqueue, there is no ganrantee that map will be actually
freed after a couple of rcu grace periods. This patch removed
such map leak detection and then the test can pass consistently.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240322061353.632136-1-yonghong.song@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f803bcf920 ]
In some systems, the netcat server can incur in delay to start listening.
When this happens, the test can randomly fail in various points.
This is an example error message:
# ip gre none gso
# encap 192.168.1.1 to 192.168.1.2, type gre, mac none len 2000
# test basic connectivity
# Ncat: Connection refused.
The issue stems from a race condition between the netcat client and server.
The test author had addressed this problem by implementing a sleep, which
I have removed in this patch.
This patch introduces a function capable of sleeping for up to two seconds.
However, it can terminate the waiting period early if the port is reported
to be listening.
Signed-off-by: Alessandro Carminati (Red Hat) <alessandro.carminati@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240314105911.213411-1-alessandro.carminati@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 40eec1795c upstream.
The creation of new subflows can fail for different reasons. If no
subflow have been created using the received ADD_ADDR, the related
counters should not be updated, otherwise they will never be decremented
for events related to this ID later on.
For the moment, the number of accepted ADD_ADDR is only decremented upon
the reception of a related RM_ADDR, and only if the remote address ID is
currently being used by at least one subflow. In other words, if no
subflow can be created with the received address, the counter will not
be decremented. In this case, it is then important not to increment
pm.add_addr_accepted counter, and not to modify pm.accept_addr bit.
Note that this patch does not modify the behaviour in case of failures
later on, e.g. if the MP Join is dropped or rejected.
The "remove invalid addresses" MP Join subtest has been modified to
validate this case. The broadcast IP address is added before the "valid"
address that will be used to successfully create a subflow, and the
limit is decreased by one: without this patch, it was not possible to
create the last subflow, because:
- the broadcast address would have been accepted even if it was not
usable: the creation of a subflow to this address results in an error,
- the limit of 2 accepted ADD_ADDR would have then been reached.
Fixes: 01cacb00b3 ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: YonglongLi <liyonglong@chinatelecom.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-3-1ab9ddfa3d00@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Conflicts in the selftests, in the same context, because the next line
with 'run_tests' has been updated later by a few commits like commit
e571fb09c8 ("selftests: mptcp: add speed env var"). We don't need to
touch this line, nor to backport the long refactoring series. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 23a4b108ac upstream.
The kprobe_eventname.tc test checks if a function with .isra. can have a
kprobe attached to it. It loops through the kallsyms file for all the
functions that have the .isra. name, and checks if it exists in the
available_filter_functions file, and if it does, it uses it to attach a
kprobe to it.
The issue is that kprobes can not attach to functions that are listed more
than once in available_filter_functions. With the latest kernel, the
function that is found is: rapl_event_update.isra.0
# grep rapl_event_update.isra.0 /sys/kernel/tracing/available_filter_functions
rapl_event_update.isra.0
rapl_event_update.isra.0
It is listed twice. This causes the attached kprobe to it to fail which in
turn fails the test. Instead of just picking the function function that is
found in available_filter_functions, pick the first one that is listed
only once in available_filter_functions.
Cc: stable@vger.kernel.org
Fixes: 604e354823 ("selftests/ftrace: Select an existing function in kprobe_eventname test")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6a09788c1a upstream.
The RmAddr MIB counter is supposed to be incremented once when a valid
RM_ADDR has been received. Before this patch, it could have been
incremented as many times as the number of subflows connected to the
linked address ID, so it could have been 0, 1 or more than 1.
The "RmSubflow" is incremented after a local operation. In this case,
it is normal to tied it with the number of subflows that have been
actually removed.
The "remove invalid addresses" MP Join subtest has been modified to
validate this case. A broadcast IP address is now used instead: the
client will not be able to create a subflow to this address. The
consequence is that when receiving the RM_ADDR with the ID attached to
this broadcast IP address, no subflow linked to this ID will be found.
Fixes: 7a7e52e38a ("mptcp: add RM_ADDR related mibs")
Cc: stable@vger.kernel.org
Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: YonglongLi <liyonglong@chinatelecom.cn>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-2-1ab9ddfa3d00@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f6c3c83db1 ]
The dynevent/test_duplicates.tc test case uses `syscalls/sys_enter_openat`
event for defining eprobe on it. Since this `syscalls` events depend on
CONFIG_FTRACE_SYSCALLS=y, if it is not set, the test will fail.
Add the event file to `required` line so that the test will return
`unsupported` result.
Fixes: 297e1dcdca ("selftests/ftrace: Add selftest for testing duplicate eprobes and kprobes")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d555105271 ]
tools/testing/cxl/test/mem.c uses vmalloc() and vfree() but does not
include linux/vmalloc.h. Kernel v6.10 made changes that causes the
currently included headers not depend on vmalloc.h and therefore
mem.c can no longer compile. Add linux/vmalloc.h to fix compile
issue.
CC [M] tools/testing/cxl/test/mem.o
tools/testing/cxl/test/mem.c: In function ‘label_area_release’:
tools/testing/cxl/test/mem.c:1428:9: error: implicit declaration of function ‘vfree’; did you mean ‘kvfree’? [-Werror=implicit-function-declaration]
1428 | vfree(lsa);
| ^~~~~
| kvfree
tools/testing/cxl/test/mem.c: In function ‘cxl_mock_mem_probe’:
tools/testing/cxl/test/mem.c:1466:22: error: implicit declaration of function ‘vmalloc’; did you mean ‘kmalloc’? [-Werror=implicit-function-declaration]
1466 | mdata->lsa = vmalloc(LSA_SIZE);
| ^~~~~~~
| kmalloc
Fixes: 7d3eb23c4c ("tools/testing/cxl: Introduce a mock memory device + driver")
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/20240528225551.1025977-1-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d4202e66a4 ]
Patch series "Fixes for compaction_test", v2.
The compaction_test memory selftest introduces fragmentation in memory
and then tries to allocate as many hugepages as possible. This series
addresses some problems.
On Aarch64, if nr_hugepages == 0, then the test trivially succeeds since
compaction_index becomes 0, which is less than 3, due to no division by
zero exception being raised. We fix that by checking for division by
zero.
Secondly, correctly set the number of hugepages to zero before trying
to set a large number of them.
Now, consider a situation in which, at the start of the test, a non-zero
number of hugepages have been already set (while running the entire
selftests/mm suite, or manually by the admin). The test operates on 80%
of memory to avoid OOM-killer invocation, and because some memory is
already blocked by hugepages, it would increase the chance of OOM-killing.
Also, since mem_free used in check_compaction() is the value before we
set nr_hugepages to zero, the chance that the compaction_index will
be small is very high if the preset nr_hugepages was high, leading to a
bogus test success.
This patch (of 3):
Currently, if at runtime we are not able to allocate a huge page, the test
will trivially pass on Aarch64 due to no exception being raised on
division by zero while computing compaction_index. Fix that by checking
for nr_hugepages == 0. Anyways, in general, avoid a division by zero by
exiting the program beforehand. While at it, fix a typo, and handle the
case where the number of hugepages may overflow an integer.
Link: https://lkml.kernel.org/r/20240521074358.675031-1-dev.jain@arm.com
Link: https://lkml.kernel.org/r/20240521074358.675031-2-dev.jain@arm.com
Fixes: bd67d5c15c ("Test compaction of mlocked memory")
Signed-off-by: Dev Jain <dev.jain@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Sri Jayaramappa <sjayaram@akamai.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f3b7568c49 ]
Every test result report in the compaction test prints a distinct log
messae, and some of the reports print a name that varies at runtime. This
causes problems for automation since a lot of automation software uses the
printed string as the name of the test, if the name varies from run to run
and from pass to fail then the automation software can't identify that a
test changed result or that the same tests are being run.
Refactor the logging to use a consistent name when printing the result of
the test, printing the existing messages as diagnostic information instead
so they are still available for people trying to interpret the results.
Link: https://lkml.kernel.org/r/20240209-kselftest-mm-cleanup-v1-2-a3c0386496b5@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: d4202e66a4 ("selftests/mm: compaction_test: fix bogus test success on Aarch64")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc563e7498 ]
The amt.sh requires smcrouted for multicasting routing.
So, it starts smcrouted before forwarding tests.
It must be stopped after all tests, but it isn't.
To fix this issue, it kills smcrouted in the cleanup logic.
Fixes: c08e8baea7 ("selftests: add amt interface selftest script")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 06080ea230 ]
When running the bridge IGMP/MLD selftests on debug kernels we can get
spurious errors when setting up the IGMP/MLD exclude timeout tests
because the membership interval is just 3 seconds and the setup has 2
seconds of sleep plus various validations, the one second that is left
is not enough. Increase the membership interval from 3 to 5 seconds to
make room for the setup validation and 2 seconds of sleep.
Fixes: 34d7ecb3d4 ("selftests: net: bridge: update IGMP/MLD membership interval value")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4c639b6a7b ]
The test seems to expect that nc will exit after the first
received message. This is not the case with Ncat 7.94.
There are multiple versions of nc out there, switch
to socat for better compatibility.
Tell socat to exit after 128 bytes and pad the message.
Since the test sets -e make sure we don't set exit code
(|| true) and print the pass / fail rather then silently
moving over the test and just setting non-zero exit code
with no output indicating what failed.
Fixes: c08e8baea7 ("selftests: add amt interface selftest script")
Acked-by: Paolo Abeni<pabeni@redhat.com>
Tested-by: Taehee Yoo <ap420073@gmail.com>
Link: https://lore.kernel.org/r/20240509161952.3940476-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d4e6fbd245 ]
Align the behavior for gcc and clang builds by interpreting unset
`ARCH` and `CROSS_COMPILE` variables in `LLVM` builds as a sign that the
user wants to build for the host architecture.
This patch preserves the properties that setting the `ARCH` variable to an
unknown value will trigger an error that complains about insufficient
information, and that a set `CROSS_COMPILE` variable will override the
target triple that is determined based on presence/absence of `ARCH`.
When compiling with clang, i.e., `LLVM` is set, an unset `ARCH` variable in
combination with an unset `CROSS_COMPILE` variable, i.e., compiling for
the host architecture, leads to compilation failures since `lib.mk` can
not determine the clang target triple. In this case, the following error
message is displayed for each subsystem that does not set `ARCH` in its
own Makefile before including `lib.mk` (lines wrapped at 75 chrs):
make[1]: Entering directory '/mnt/build/linux/tools/testing/selftests/
sysctl'
../lib.mk:33: *** Specify CROSS_COMPILE or add '--target=' option to
lib.mk. Stop.
make[1]: Leaving directory '/mnt/build/linux/tools/testing/selftests/
sysctl'
In the same scenario a gcc build would default to the host architecture,
i.e., it would use plain `gcc`.
Fixes: 795285ef24 ("selftests: Fix clang cross compilation")
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Valentin Obst <kernel@valentinobst.de>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8171aa4ca ]
First of all, in order to build with clang at all, one must first apply
Valentin Obst's build fix for LLVM [1]. Once that is done, then when
building with clang, via:
make LLVM=1 -C tools/testing/selftests
...the following error occurs:
clang: error: cannot specify -o when generating multiple output files
This is because clang, unlike gcc, won't accept invocations of this
form:
clang file1.c header2.h
Fix this by using selftests/lib.mk facilities for tracking local header
file dependencies: add them to LOCAL_HDRS, leaving only the .c files to
be passed to the compiler.
[1] https://lore.kernel.org/all/20240329-selftests-libmk-llvm-rfc-v1-1-2f9ed7d1c49f@valentinobst.de/
Fixes: 8e289f4542 ("selftests/resctrl: Add resctrl.h into build deps")
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 019baf635e ]
First of all, in order to build with clang at all, one must first apply
Valentin Obst's build fix for LLVM [1]. Once that is done, then when
building with clang, via:
make LLVM=1 -C tools/testing/selftests
...the following error occurs:
clang: error: cannot specify -o when generating multiple output files
This is because clang, unlike gcc, won't accept invocations of this
form:
clang file1.c header2.h
While trying to fix this, I noticed that:
a) selftests/lib.mk already avoids the problem, and
b) The binderfs Makefile indavertently bypasses the selftests/lib.mk
build system, and quitely uses Make's implicit build rules for .c files
instead.
The Makefile attempts to set up both a dependency and a source file,
neither of which was needed, because lib.mk is able to automatically
handle both. This line:
binderfs_test: binderfs_test.c
...causes Make's implicit rules to run, which builds binderfs_test
without ever looking at lib.mk.
Fix this by simply deleting the "binderfs_test:" Makefile target and
letting lib.mk handle it instead.
[1] https://lore.kernel.org/all/20240329-selftests-libmk-llvm-rfc-v1-1-2f9ed7d1c49f@valentinobst.de/
Fixes: 6e29225af9 ("binderfs: port tests to test harness infrastructure")
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 160933e330 ]
Assert that accesses to a non-existent vgic-v2 CPU interface
consistently fail across the various KVM device attr ioctls. This also
serves as a regression test for a bug wherein KVM hits a NULL
dereference when the CPUID specified in the ioctl is invalid.
Note that there is no need to print the observed errno, as TEST_ASSERT()
will take care of it.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240424173959.3776798-3-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17c67ed752 ]
Currently, the sud_test expects the emulated syscall to return the
emulated syscall number. This assumption only works on architectures
were the syscall calling convention use the same register for syscall
number/syscall return value. This is not the case for RISC-V and thus
the return value must be also emulated using the provided ucontext.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20231206134438.473166-1-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0763613621 ]
The struct adjtimex freq field takes a signed value who's units are in
shifted (<<16) parts-per-million.
Unfortunately for negative adjustments, the straightforward use of:
freq = ppm << 16 trips undefined behavior warnings with clang:
valid-adjtimex.c:66:6: warning: shifting a negative signed value is undefined [-Wshift-negative-value]
-499<<16,
~~~~^
valid-adjtimex.c:67:6: warning: shifting a negative signed value is undefined [-Wshift-negative-value]
-450<<16,
~~~~^
..
Fix it by using a multiply by (1 << 16) instead of shifting negative values
in the valid-adjtimex test case. Align the values for better readability.
Reported-by: Lee Jones <joneslee@google.com>
Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20240409202222.2830476-1-jstultz@google.com
Link: https://lore.kernel.org/lkml/0c6d4f0d-2064-4444-986b-1d1ed782135f@collabora.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kees Cook
Al Viro
Matthieu Baerts (NGI0)
Feng Tang
Paul E. McKenney
Yonghong Song
Liu Jing
Andrii Nakryiko
Michael Ellerman
Mickaël Salaün
Ido Schimmel
Amit Cohen
Geliang Tang
John Hubbard
Eduard Zingerman
Jason A. Donenfeld
Zijian Zhang
Kunwu Chan
Alessandro Carminati (Red Hat)
YonglongLi
Steven Rostedt (Google)
Masami Hiramatsu (Google)
Dave Jiang
Dev Jain
Mark Brown
Muhammad Usama Anjum
Taehee Yoo
Nikolay Aleksandrov
Edward Liaw
Jakub Kicinski
Valentin Obst
Oliver Upton
Clément Léger
John Stultz