commit 737bb912eb upstream.
This patch is a mitigation to prevent the A-MSDU spoofing vulnerability
for mesh networks. The initial update to the IEEE 802.11 standard, in
response to the FragAttacks, missed this case (CVE-2025-27558). It can
be considered a variant of CVE-2020-24588 but for mesh networks.
This patch tries to detect if a standard MSDU was turned into an A-MSDU
by an adversary. This is done by parsing a received A-MSDU as a standard
MSDU, calculating the length of the Mesh Control header, and seeing if
the 6 bytes after this header equal the start of an rfc1042 header. If
equal, this is a strong indication of an ongoing attack attempt.
This defense was tested with mac80211_hwsim against a mesh network that
uses an empty Mesh Address Extension field, i.e., when four addresses
are used, and when using a 12-byte Mesh Address Extension field, i.e.,
when six addresses are used. Functionality of normal MSDUs and A-MSDUs
was also tested, and confirmed working, when using both an empty and
12-byte Mesh Address Extension field.
It was also tested with mac80211_hwsim that A-MSDU attacks in non-mesh
networks keep being detected and prevented.
Note that the vulnerability being patched, and the defense being
implemented, was also discussed in the following paper and in the
following IEEE 802.11 presentation:
https://papers.mathyvanhoef.com/wisec2025.pdfhttps://mentor.ieee.org/802.11/dcn/25/11-25-0949-00-000m-a-msdu-mesh-spoof-protection.docx
Cc: stable@vger.kernel.org
Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
Link: https://patch.msgid.link/20250616004635.224344-1-Mathy.Vanhoef@kuleuven.be
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1e1f706fc2 ]
S1G beacons are not traditional beacons but a type of extension frame.
Extension frames contain the frame control and duration fields, followed
by zero or more optional fields before the frame body. These optional
fields are distinct from the variable length elements.
The presence of optional fields is indicated in the frame control field.
To correctly locate the elements offset, the frame control must be parsed
to identify which optional fields are present. Currently, mac80211 parses
S1G beacons based on fixed assumptions about the frame layout, without
inspecting the frame control field. This can result in incorrect offsets
to the "variable" portion of the frame.
Properly parse S1G beacon frames by using the field lengths defined in
IEEE 802.11-2024, section 9.3.4.3, ensuring that the elements offset is
calculated accurately.
Fixes: 9eaffe5078 ("cfg80211: convert S1G beacon to scan results")
Fixes: cd418ba63f ("mac80211: convert S1G beacon to scan results")
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250603053538.468562-1-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 023c1f2f06 upstream.
Currently during the multi-link element defragmentation process, the
multi-link element length added to the total IEs length when calculating
the length of remaining IEs after the multi-link element in
cfg80211_defrag_mle(). This could lead to out-of-bounds access if the
multi-link element or its corresponding fragment elements are the last
elements in the IEs buffer.
To address this issue, correctly calculate the remaining IEs length by
deducting the multi-link element end offset from total IEs end offset.
Cc: stable@vger.kernel.org
Fixes: 2481b5da9c ("wifi: cfg80211: handle BSS data contained in ML probe responses")
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://patch.msgid.link/20250424-fix_mle_defragmentation_oob_access-v1-1-84412a1743fa@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 59b348be75 upstream.
Syzbot keeps reporting an issue [1] that occurs when erroneous symbols
sent from userspace get through into user_alpha2[] via
regulatory_hint_user() call. Such invalid regulatory hints should be
rejected.
While a sanity check from commit 47caf685a6 ("cfg80211: regulatory:
reject invalid hints") looks to be enough to deter these very cases,
there is a way to get around it due to 2 reasons.
1) The way isalpha() works, symbols other than latin lower and
upper letters may be used to determine a country/domain.
For instance, greek letters will also be considered upper/lower
letters and for such characters isalpha() will return true as well.
However, ISO-3166-1 alpha2 codes should only hold latin
characters.
2) While processing a user regulatory request, between
reg_process_hint_user() and regulatory_hint_user() there happens to
be a call to queue_regulatory_request() which modifies letters in
request->alpha2[] with toupper(). This works fine for latin symbols,
less so for weird letter characters from the second part of _ctype[].
Syzbot triggers a warning in is_user_regdom_saved() by first sending
over an unexpected non-latin letter that gets malformed by toupper()
into a character that ends up failing isalpha() check.
Prevent this by enhancing is_an_alpha2() to ensure that incoming
symbols are latin letters and nothing else.
[1] Syzbot report:
------------[ cut here ]------------
Unexpected user alpha2: A�
WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 is_user_regdom_saved net/wireless/reg.c:440 [inline]
WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 restore_alpha2 net/wireless/reg.c:3424 [inline]
WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 restore_regulatory_settings+0x3c0/0x1e50 net/wireless/reg.c:3516
Modules linked in:
CPU: 1 UID: 0 PID: 964 Comm: kworker/1:2 Not tainted 6.12.0-rc5-syzkaller-00044-gc1e939a21eb1 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Workqueue: events_power_efficient crda_timeout_work
RIP: 0010:is_user_regdom_saved net/wireless/reg.c:440 [inline]
RIP: 0010:restore_alpha2 net/wireless/reg.c:3424 [inline]
RIP: 0010:restore_regulatory_settings+0x3c0/0x1e50 net/wireless/reg.c:3516
...
Call Trace:
<TASK>
crda_timeout_work+0x27/0x50 net/wireless/reg.c:542
process_one_work kernel/workqueue.c:3229 [inline]
process_scheduled_works+0xa65/0x1850 kernel/workqueue.c:3310
worker_thread+0x870/0xd30 kernel/workqueue.c:3391
kthread+0x2f2/0x390 kernel/kthread.c:389
ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Reported-by: syzbot+e10709ac3c44f3d4e800@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e10709ac3c44f3d4e800
Fixes: 09d989d179 ("cfg80211: add regulatory hint disconnect support")
Cc: stable@kernel.org
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://patch.msgid.link/20250228134659.1577656-1-n.zhandarovich@fintech.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b5c32ff6a3 ]
Currently, during link deletion, the link ID is first removed from the
valid_links bitmap before performing any clean-up operations. However, some
functions require the link ID to remain in the valid_links bitmap. One
such example is cfg80211_cac_event(). The flow is -
nl80211_remove_link()
cfg80211_remove_link()
ieee80211_del_intf_link()
ieee80211_vif_set_links()
ieee80211_vif_update_links()
ieee80211_link_stop()
cfg80211_cac_event()
cfg80211_cac_event() requires link ID to be present but it is cleared
already in cfg80211_remove_link(). Ultimately, WARN_ON() is hit.
Therefore, clear the link ID from the bitmap only after completing the link
clean-up.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20241121-mlo_dfs_fix-v2-1-92c3bf7ab551@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f1d3334d60 ]
With the __counted_by annocation in cfg80211_scan_request struct,
the "n_channels" struct member must be set before accessing the
"channels" array. Failing to do so will trigger a runtime warning
when enabling CONFIG_UBSAN_BOUNDS and CONFIG_FORTIFY_SOURCE.
Fixes: e3eac9f32e ("wifi: cfg80211: Annotate struct cfg80211_scan_request with __counted_by")
Signed-off-by: Haoyu Li <lihaoyu499@gmail.com>
Link: https://patch.msgid.link/20241203152049.348806-1-lihaoyu499@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4ebb58cb9 ]
Currently, when the driver attempts to connect to an AP MLD with multiple
APs, the cfg80211_mlme_check_mlo_compat() function requires the Medium
Synchronization Delay values from different APs of the same AP MLD to be
equal, which may result in connection failures.
This is because when the driver receives a multi-link probe response from
an AP MLD with multiple APs, cfg80211 updates the Elements for each AP
based on the multi-link probe response. If the Medium Synchronization Delay
is set in the multi-link probe response, the Elements for each AP belonging
to the same AP MLD will have the Medium Synchronization Delay set
simultaneously. If non-multi-link probe responses are received from
different APs of the same MLD AP, cfg80211 will still update the Elements
based on the non-multi-link probe response. Since the non-multi-link probe
response does not set the Medium Synchronization Delay
(IEEE 802.11be-2024-35.3.4.4), if the Elements from a non-multi-link probe
response overwrite those from a multi-link probe response that has set the
Medium Synchronization Delay, the Medium Synchronization Delay values for
APs belonging to the same AP MLD will not be equal. This discrepancy causes
the cfg80211_mlme_check_mlo_compat() function to fail, leading to
connection failures. Commit ccb964b4ab
("wifi: cfg80211: validate MLO connections better") did not take this into
account.
To address this issue, remove this validity check.
Fixes: ccb964b4ab ("wifi: cfg80211: validate MLO connections better")
Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com>
Link: https://patch.msgid.link/20241031134223.970-1-quic_lingbok@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd9813d13b ]
Currently, wiphy_verify_combinations() fails for the multi-radio per wiphy
due to the condition check on new global interface combination that DFS
only works on one channel. In a multi-radio scenario, new global interface
combination encompasses the capabilities of all radio combinations, so it
supports more than one channel with DFS. For multi-radio per wiphy,
interface combination verification needs to be performed for radio specific
interface combinations. This is necessary as the new global interface
combination combines the capabilities of all radio combinations.
Fixes: a01b1e9f99 ("wifi: mac80211: add support for DFS with multiple radios")
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Link: https://patch.msgid.link/20240917140239.886083-1-quic_periyasa@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
wireless fixes for v6.12-rc5
The first set of wireless fixes for v6.12. We have been busy and have
not been able to send this earlier, so there are more fixes than
usual. The fixes are all over, both in stack and in drivers, but
nothing special really standing out.
Currently, in cfg80211_parse_ml_elem_sta_data(), when RNR element
indicates a BSS that operates in a channel that current regulatory
domain doesn't support, a NULL value is returned by
ieee80211_get_channel_khz() and assigned to this BSS entry's channel
field. Later in cfg80211_inform_single_bss_data(), the reported
BSS entry's channel will be wrongly overridden by transmitted BSS's.
This could result in connection failure that when wpa_supplicant
tries to select this reported BSS entry while it actually resides in
an unsupported channel.
Since this channel is not supported, it is reasonable to skip such
entries instead of reporting wrong information.
Signed-off-by: Chenming Huang <quic_chenhuan@quicinc.com>
Link: https://patch.msgid.link/20240923021644.12885-1-quic_chenhuan@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
Currently, during starting a radar detection, no link id information is
parsed and passed down. In order to support starting radar detection
during Multi Link Operation, it is required to pass link id as well.
Add changes to first parse and then pass link id in the start radar
detection path.
Additionally, update notification APIs to allow drivers/mac80211 to
pass the link ID.
However, everything is handled at link 0 only until all API's are ready to
handle it per link.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20240906064426.2101315-6-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
A few members related to DFS handling are currently under per wireless
device data structure. However, in order to support DFS with MLO, there is
a need to have them on a per-link manner.
Hence, as a preliminary step, move members cac_started, cac_start_time
and cac_time_ms to be on a per-link basis.
Since currently, link ID is not known at all places, use default value of
0 for now.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20240906064426.2101315-5-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
rdev_end_cac trace event is linked with wiphy_netdev_evt event class.
There is no option to pass link ID currently to wiphy_netdev_evt class.
A subsequent change would pass link ID to rdev_end_cac event and hence
it can no longer derive the event class from wiphy_netdev_evt.
Therefore, unlink rdev_end_cac event from wiphy_netdev_evt and define it's
own independent trace event. Link ID would be passed in subsequent change.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20240906064426.2101315-4-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Looking at https://syzkaller.appspot.com/bug?extid=1a3986bbd3169c307819
and running reproducer with CONFIG_UBSAN_BOUNDS, I've noticed the
following:
[ T4985] UBSAN: array-index-out-of-bounds in net/wireless/scan.c:3479:25
[ T4985] index 164 is out of range for type 'struct ieee80211_channel *[]'
<...skipped...>
[ T4985] Call Trace:
[ T4985] <TASK>
[ T4985] dump_stack_lvl+0x1c2/0x2a0
[ T4985] ? __pfx_dump_stack_lvl+0x10/0x10
[ T4985] ? __pfx__printk+0x10/0x10
[ T4985] __ubsan_handle_out_of_bounds+0x127/0x150
[ T4985] cfg80211_wext_siwscan+0x11a4/0x1260
<...the rest is not too useful...>
Even if we do 'creq->n_channels = n_channels' before 'creq->ssids =
(void *)&creq->channels[n_channels]', UBSAN treats the latter as
off-by-one error. Fix this by using pointer arithmetic rather than
an expression with explicit array indexing and use convenient
'struct_size()' to simplify the math here and in 'kzalloc()' above.
Fixes: 5ba63533bb ("cfg80211: fix alignment problem in scan request")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20240905150400.126386-1-dmantipov@yandex.ru
[fix coding style for multi-line calculation]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
"Interface can't change network namespaces" is rather an attribute,
not a feature, and it can't be changed via Ethtool.
Make it a "cold" private flag instead of a netdev_feature and free
one more bit.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When starting CAC in a mode other than AP mode, it return a
"WARNING: CPU: 0 PID: 63 at cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211]"
caused by the chandef.chan being null at the end of CAC.
Solution: Ensure the channel definition is set for the different modes
when starting CAC to avoid getting a NULL 'chan' at the end of CAC.
Call Trace:
? show_regs.part.0+0x14/0x16
? __warn+0x67/0xc0
? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211]
? report_bug+0xa7/0x130
? exc_overflow+0x30/0x30
? handle_bug+0x27/0x50
? exc_invalid_op+0x18/0x60
? handle_exception+0xf6/0xf6
? exc_overflow+0x30/0x30
? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211]
? exc_overflow+0x30/0x30
? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211]
? regulatory_propagate_dfs_state.cold+0x1b/0x4c [cfg80211]
? cfg80211_propagate_cac_done_wk+0x1a/0x30 [cfg80211]
? process_one_work+0x165/0x280
? worker_thread+0x120/0x3f0
? kthread+0xc2/0xf0
? process_one_work+0x280/0x280
? kthread_complete_and_exit+0x20/0x20
? ret_from_fork+0x19/0x24
Reported-by: Kretschmer Mathias <mathias.kretschmer@fit.fraunhofer.de>
Signed-off-by: Issam Hamdi <ih@simonwunderlich.de>
Link: https://patch.msgid.link/20240816142418.3381951-1-ih@simonwunderlich.de
[shorten subject, remove OCB, reorder cases to match previous list]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
According to RFC8325 4.3, Multimedia Streaming: AF31(011010, 26),
AF32(011100, 28), AF33(011110, 30) maps to User Priority = 4
and AC_VI (Video).
However, the original code remain the default three Most Significant
Bits (MSBs) of the DSCP, which makes AF3x map to User Priority = 3
and AC_BE (Best Effort).
Fixes: 6fdb8b8781 ("wifi: cfg80211: Update the default DSCP-to-UP mapping")
Signed-off-by: hhorace <hhoracehsu@gmail.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20240807082205.1369-1-hhoracehsu@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Individual MLO links connection status is not copied to
EVENT_CONNECT_RESULT data while processing the connect response
information in cfg80211_connect_done(). Due to this failed links
are wrongly indicated with success status in EVENT_CONNECT_RESULT.
To fix this, copy the individual MLO links status to the
EVENT_CONNECT_RESULT data.
Fixes: 53ad07e982 ("wifi: cfg80211: support reporting failed links")
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Reviewed-by: Carlos Llamas <cmllamas@google.com>
Link: https://patch.msgid.link/20240724125327.3495874-1-quic_vjakkam@quicinc.com
[commit message editorial changes]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The prerequisite for MLO support in cfg80211/mac80211 is that all the links
participating in MLO must be from the same wiphy/ieee80211_hw. To meet this
expectation, some drivers may need to group multiple discrete hardware each
acting as a link in MLO under single wiphy.
With this change, supported frequencies and interface combinations of each
individual radio are reported to user space. This allows user space to figure
out the limitations of what combination of channels can be used concurrently.
Even for non-MLO devices, this improves support for devices capable of
running on multiple channels at the same time.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/18a88f9ce82b1c9f7c12f1672430eaf2bb0be295.1720514221.git-series.nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
e3f02f32a0 ("ionic: fix kernel panic due to multi-buffer handling")
d9c0420999 ("ionic: Mark error paths in the data path as unlikely")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
