commit 2cdde91c14 upstream.
The tb_dp_port_set_hops() function was incorrectly clearing
ADP_DP_CS_1_AUX_RX_HOPID_MASK twice. According to the function's
purpose, it should clear both TX and RX AUX HopID fields. Replace the
first instance with ADP_DP_CS_1_AUX_TX_HOPID_MASK to ensure proper
configuration of both AUX directions.
Fixes: 98176380cb ("thunderbolt: Convert DP adapter register names to follow the USB4 spec")
Cc: stable@vger.kernel.org
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 58d71d4242 upstream.
commit 1a760d10de ("thunderbolt: Fix a logic error in wake on connect")
fixated on the USB4 port sysfs wakeup file not working properly to control
policy, but it had an unintended side effect that the sysfs file controls
policy both at runtime and at suspend time. The sysfs file is supposed to
only control behavior while system is suspended.
Pass whether programming a port for runtime into usb4_switch_set_wake()
and if runtime then ignore the value in the sysfs file.
Cc: stable@vger.kernel.org
Reported-by: Alexander Kovacs <Alexander.Kovacs@amd.com>
Tested-by: Alexander Kovacs <Alexander.Kovacs@amd.com>
Fixes: 1a760d10de ("thunderbolt: Fix a logic error in wake on connect")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1a760d10de ]
commit a5cfc9d658 ("thunderbolt: Add wake on connect/disconnect
on USB4 ports") introduced a sysfs file to control wake up policy
for a given USB4 port that defaulted to disabled.
However when testing commit 4bfeea6ec1 ("thunderbolt: Use wake
on connect and disconnect over suspend") I found that it was working
even without making changes to the power/wakeup file (which defaults
to disabled). This is because of a logic error doing a bitwise or
of the wake-on-connect flag with device_may_wakeup() which should
have been a logical AND.
Adjust the logic so that policy is only applied when wakeup is
actually enabled.
Fixes: a5cfc9d658 ("thunderbolt: Add wake on connect/disconnect on USB4 ports")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 0f73628e9d upstream.
Some of our devices crash in tb_cfg_request_dequeue():
general protection fault, probably for non-canonical address 0xdead000000000122
CPU: 6 PID: 91007 Comm: kworker/6:2 Tainted: G U W 6.6.65
RIP: 0010:tb_cfg_request_dequeue+0x2d/0xa0
Call Trace:
<TASK>
? tb_cfg_request_dequeue+0x2d/0xa0
tb_cfg_request_work+0x33/0x80
worker_thread+0x386/0x8f0
kthread+0xed/0x110
ret_from_fork+0x38/0x50
ret_from_fork_asm+0x1b/0x30
The circumstances are unclear, however, the theory is that
tb_cfg_request_work() can be scheduled twice for a request:
first time via frame.callback from ring_work() and second
time from tb_cfg_request(). Both times kworkers will execute
tb_cfg_request_dequeue(), which results in double list_del()
from the ctl->request_queue (the list poison deference hints
at it: 0xdead000000000122).
Do not dequeue requests that don't have TB_CFG_REQUEST_ACTIVE
bit set.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ad79c278e4 ]
This is only used to write a new NVM in order to upgrade the retimer
firmware. It does not make sense to expose it if upgrade is disabled.
This also makes it consistent with the router NVM upgrade.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 75749d2c1d ]
Thomas reported connection issues on AMD system with Pluggable UD-4VPD
dock. After some experiments it looks like the device has some sort of
internal timeout that triggers reconnect. This is completely against the
USB4 spec, as there is no requirement for the host to enumerate the
device right away or even at all.
In Linux case the delay is caused by scanning of retimers on the link so
we can work this around by doing the scanning after the device router
has been enumerated.
Reported-by: Thomas Lynema <lyz27@yahoo.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219748
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 24740385cb upstream.
When USB-C monitor is connected directly to Intel Barlow Ridge host, it
goes into "redrive" mode that basically routes the DisplayPort signals
directly from the GPU to the USB-C monitor without any tunneling needed.
However, the host router must be powered on for this to work. Aaron
reported that there are a couple of cases where this will not work with
the current code:
- Booting with USB-C monitor plugged in.
- Plugging in USB-C monitor when the host router is in sleep state
(runtime suspended).
- Plugging in USB-C device while the system is in system sleep state.
In all these cases once the host router is runtime suspended the picture
on the connected USB-C display disappears too. This is certainly not
what the user expected.
For this reason improve the redrive mode handling to keep the host
router from runtime suspending when detect that any of the above cases
is happening.
Fixes: a75e0684ef ("thunderbolt: Keep the domain powered when USB4 port is in redrive mode")
Reported-by: Aaron Rainbolt <arainbolt@kfocus.org>
Closes: https://lore.kernel.org/linux-usb/20241009220118.70bfedd0@kf-ir16/
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
thunderbolt: Fixes for v6.12-rc7
This includes following USB4/Thunderbolt fixes for v6.12-rc7:
- Fix for retimer enumeration.
- Fix connection issue with Pluggable UD-4VPD USB4 dock.
Both have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v6.12-rc7' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Fix connection issue with Pluggable UD-4VPD dock
thunderbolt: Add only on-board retimers when !CONFIG_USB4_DEBUGFS_MARGINING
Rick reported that his Pluggable USB4 dock does not work anymore after
upgrading to v6.10 kernel.
It looks like commit c6ca1ac9f4 ("thunderbolt: Increase sideband
access polling delay") makes the device router enumeration happen later
than what might be expected by the dock (although there is no such limit
in the USB4 spec) which probably makes it assume there is something
wrong with the high-speed link and reset it. After the link is reset the
same issue happens again and again.
For this reason lower the sideband access delay from 5ms to 1ms. This
seems to work fine according to Rick's testing.
Reported-by: Rick Lahaye <rick@581238.xyz>
Closes: https://lore.kernel.org/linux-usb/000f01db247b$d10e1520$732a3f60$@581238.xyz/
Tested-by: Rick Lahaye <rick@581238.xyz>
Fixes: c6ca1ac9f4 ("thunderbolt: Increase sideband access polling delay")
Cc: stable@vger.kernel.org
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Normally there is no need to enumerate retimers on the other side of the
cable. This is only needed in special cases where user wants to run
receiver lane margining against the downstream facing port of a retimer.
Furthermore this might confuse the userspace tools such as fwupd because
it cannot read the information it expects from these retimers.
Fix this by changing the retimer enumeration code to add only on-board
retimers when CONFIG_USB4_DEBUGFS_MARGINING is not enabled.
Reported-by: AceLan Kao <acelan.kao@canonical.com>
Tested-by: AceLan Kao <acelan.kao@canonical.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219420
Cc: stable@vger.kernel.org
Fixes: ff6ab055e0 ("thunderbolt: Add receiver lane margining support for retimers")
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Currently, when configuring TMU (Time Management Unit) mode of a given
router, we take into account only its own TMU requirements ignoring
other routers in the domain. This is problematic if the router we are
configuring has lower TMU requirements than what is already configured
in the domain.
In the scenario below, we have a host router with two USB4 ports: A and
B. Port A connected to device router #1 (which supports CL states) and
existing DisplayPort tunnel, thus, the TMU mode is HiFi uni-directional.
1. Initial topology
[Host]
A/
/
[Device #1]
/
Monitor
2. Plug in device #2 (that supports CL states) to downstream port B of
the host router
[Host]
A/ B\
/ \
[Device #1] [Device #2]
/
Monitor
The TMU mode on port B and port A will be configured to LowRes which is
not what we want and will cause monitor to start flickering.
To address this we first scan the domain and search for any router
configured to HiFi uni-directional mode, and if found, configure TMU
mode of the given router to HiFi uni-directional as well.
Cc: stable@vger.kernel.org
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
KASAN reported following issue:
BUG: KASAN: stack-out-of-bounds in tb_retimer_scan+0xffe/0x1550 [thunderbolt]
Read of size 4 at addr ffff88810111fc1c by task kworker/u56:0/11
CPU: 0 UID: 0 PID: 11 Comm: kworker/u56:0 Tainted: G U 6.11.0+ #1387
Tainted: [U]=USER
Workqueue: thunderbolt0 tb_handle_hotplug [thunderbolt]
Call Trace:
<TASK>
dump_stack_lvl+0x6c/0x90
print_report+0xd1/0x630
kasan_report+0xdb/0x110
__asan_report_load4_noabort+0x14/0x20
tb_retimer_scan+0xffe/0x1550 [thunderbolt]
tb_scan_port+0xa6f/0x2060 [thunderbolt]
tb_handle_hotplug+0x17b1/0x3080 [thunderbolt]
process_one_work+0x626/0x1100
worker_thread+0x6c8/0xfa0
kthread+0x2c8/0x3a0
ret_from_fork+0x3a/0x80
ret_from_fork_asm+0x1a/0x30
This happens because the loop variable still gets incremented by one so
max becomes 3 instead of 2, and this makes the second loop read past the
the array declared on the stack.
Fix this by assigning to max directly in the loop body.
Fixes: ff6ab055e0 ("thunderbolt: Add receiver lane margining support for retimers")
CC: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Mika writes:
thunderbolt: Changes for v6.12 merge window
This includes following USB4/Thunderbolt changes for the v6.12 merge
window:
- Improvements for software receiver lane margining
- Enable support for optional voltage offset range for receiver lane
margining.
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v6.12-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Improve software receiver lane margining
thunderbolt: Add optional voltage offset range for receiver lane margining
thunderbolt: Consolidate margining parameters into a structure
thunderbolt: Add missing usb4_port_sb_read() to usb4_port_sw_margin()
USB4 specification defines the metadata needed to perform software
margining, as well as the necessary steps which include waiting for
dwell time.
- Add dwell_time attribute to set the wait time while performing
margining and checking for link errors.
- Add error_counter attribute to configure error counter prior to
margining test.
- Add voltage_time_offset attribute to set the voltage or time offset
steps before performing the software margining test.
- Perform software margining test for dwell duration, break if there are
link errors, stop the clocks and provide results.
Below is a minimalistic example how this can be used. Note these values
are just examples. The exact values in practice depend on host specific
capabilities and the type of measurement to be performed.
# cd /sys/kernel/debug/thunderbolt/ROUTER/portX/margining/
# echo software > mode
# echo 400 > dwell_time
# echo 1 > run
As usual the results attribute contains the results of a succesfull run.
Signed-off-by: R Kannappan <r.kannappan@intel.com>
Co-developed-by: Rene Sapiens <rene.sapiens@intel.com>
Signed-off-by: Rene Sapiens <rene.sapiens@intel.com>
Co-developed-by: Aapo Vienamo <aapo.vienamo@linux.intel.com>
Signed-off-by: Aapo Vienamo <aapo.vienamo@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Add optional extended voltage offset range support for software and
hardware margining as defined by the USB4 specification.
If supported, it can be enabled like below:
# cd /sys/kernel/debug/thunderbolt/ROUTER/portX/margining/
# echo Y > optional_voltage_offset
Signed-off-by: Rene Sapiens <rene.sapiens@intel.com>
Co-developed-by: R Kannappan <r.kannappan@intel.com>
Signed-off-by: R Kannappan <r.kannappan@intel.com>
Co-developed-by: Aapo Vienamo <aapo.vienamo@linux.intel.com>
Signed-off-by: Aapo Vienamo <aapo.vienamo@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
I noticed that when we do discrete host router NVM upgrade and it gets
hot-removed from the PCIe side as a result of NVM firmware authentication,
if there is another host connected with enabled paths we hang in tearing
them down. This is due to fact that the Thunderbolt networking driver
also tries to cleanup the paths and ends up blocking in
tb_disconnect_xdomain_paths() waiting for the domain lock.
However, at this point we already cleaned the paths in tb_stop() so
there is really no need for tb_disconnect_xdomain_paths() to do that
anymore. Furthermore it already checks if the XDomain is unplugged and
bails out early so take advantage of that and mark the XDomain as
unplugged when we remove the parent router.
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases
to get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions.
It's not all that useful for a "write a whole driver in rust" type
of thing, but the firmware bindings do help out the phy rust
drivers, and the driver core bindings give a solid base on which
others can start their work.
There is still a long way to go here before we have a multitude of
rust drivers being added, but it's a great first step.
- driver core const api changes.
This reached across all bus types, and there are some fix-ups for
some not-common bus types that linux-next and 0-day testing shook
out.
This work is being done to help make the rust bindings more safe,
as well as the C code, moving toward the end-goal of allowing us to
put driver structures into read-only memory. We aren't there yet,
but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
ARM: sa1100: make match function take a const pointer
sysfs/cpu: Make crash_hotplug attribute world-readable
dio: Have dio_bus_match() callback take a const *
zorro: make match function take a const pointer
driver core: module: make module_[add|remove]_driver take a const *
driver core: make driver_find_device() take a const *
driver core: make driver_[create|remove]_file take a const *
firmware_loader: fix soundness issue in `request_internal`
firmware_loader: annotate doctests as `no_run`
devres: Correct code style for functions that return a pointer type
devres: Initialize an uninitialized struct member
devres: Fix memory leakage caused by driver API devm_free_percpu()
devres: Fix devm_krealloc() wasting memory
driver core: platform: Switch to use kmemdup_array()
driver core: have match() callback in struct bus_type take a const *
MAINTAINERS: add Rust device abstractions to DRIVER CORE
device: rust: improve safety comments
MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer
MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER
firmware: rust: improve safety comments
...
In the match() callback, the struct device_driver * should not be
changed, so change the function callback to be a const *. This is one
step of many towards making the driver core safe to have struct
device_driver in read-only memory.
Because the match() callback is in all busses, all busses are modified
to handle this properly. This does entail switching some container_of()
calls to container_of_const() to properly handle the constant *.
For some busses, like PCI and USB and HV, the const * is cast away in
the match callback as those busses do want to modify those structures at
this point in time (they have a local lock in the driver structure.)
That will have to be changed in the future if they wish to have their
struct device * in read-only-memory.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Alex Elder <elder@kernel.org>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/2024070136-wrongdoer-busily-01e8@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Retimers support lane margining as well so make this available through
debugfs in the same way as we do for the USB4 ports. When this is
enabled we also expose retimers on the other side of the cable because
typically margining is implemented only on direction towards the cable.
However, for the retimers on the other side of the cable we do not allow
NVM upgrade to avoid confusing the existing userspace (the same retimer
may now appear twice with different name) and is probably not a good
idea anyway.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
In order to add lane margining support for retimers make the margining
functions take sideband target and retimer index as parameters. This
makes it possible to access both router and retimer sideband using the
same functions.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
We are going to expand lane margining support for retimers too so split
out the generic margining functionality out of being specific to USB4
ports.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
This makes it possible to read and write USB4 port and retimer sideband
registers through debugfs which is useful for debugging and manufacturing
purposes. We add "sb_regs" debugfs attribute under each USB4 port and
retimer that is used to access the sideband.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
It is supposed to be close with the other lane margining functions so
move it there. No functional changes.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
This allows the interested parties to find the Thunderbolt/USB4
debugging tools (aka tbtools) easier in case they need to look at the
information under debugfs entries.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
The margin debugfs node controls the "Enable Margin Test" field of the
lane margining operations. This field selects between either low or high
voltage margin values for voltage margin test or left or right timing
margin values for timing margin test.
According to the USB4 specification, whether or not the "Enable Margin
Test" control applies, depends on the values of the "Independent
High/Low Voltage Margin" or "Independent Left/Right Timing Margin"
capability fields for voltage and timing margin tests respectively. The
pre-existing condition enabled the debugfs node also in the case where
both low/high or left/right margins are returned, which is incorrect.
This change only enables the debugfs node in question, if the specific
required capability values are met.
Signed-off-by: Aapo Vienamo <aapo.vienamo@linux.intel.com>
Fixes: d0f1e0c2a6 ("thunderbolt: Add support for receiver lane margining")
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Mika writes:
thunderbolt: Changes for v6.10 merge window
This includes following USB4/Thunderbolt changes for the v6.10 merge
window:
- Enable NVM firmare upgrade on Intel Maple Ridge Thunderbolt 4
controller
- Improve USB3 tunnel bandwidth calculation
- Improve sideband access
- Minor cleanups and fixes.
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Correct trace output of firmware connection manager packets
thunderbolt: Fix kernel-doc for tb_tunnel_alloc_dp()
thunderbolt: Fix uninitialized variable in tb_tunnel_alloc_usb3()
thunderbolt: There are only 5 basic router registers in pre-USB4 routers
thunderbolt: No need to loop over all retimers if access fails
thunderbolt: Increase sideband access polling delay
thunderbolt: Get rid of TB_CFG_PKG_PREPARE_TO_SLEEP
thunderbolt: Use correct error code with ERROR_NOT_SUPPORTED
thunderbolt: Allow USB3 bandwidth to be lower than maximum supported
thunderbolt: Fix calculation of consumed USB3 bandwidth on a path
thunderbolt: Enable NVM upgrade support on Intel Maple Ridge
These are special packets that the drivers sends directly to the
firmware connection manager (ICM). These do not have route string
because they are always consumed by the firmware connection manager
running on the host router, so hard-code that in the output accordingly.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
In case of no bandwidth available for DP tunnel, the function get the arguments
@max_up and @max_down set to zero. Fix the kernel-doc to describe more
accurately the purpose of the function.
No functional changes.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Intel pre-USB4 routers only have ROUTER_CS_0 up to ROUTER_CS_4 and it
immediately follows the TMU router registers. Correct this accordingly.
Reported-by: Rajaram Regupathy <rajaram.regupathy@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
When we read the NVM authentication status or unsetting the inbound SBTX
there is no point to continue the loop after first access to a retimer
fails because there won't be any more retimers after this anyway so bail
out from the loops early.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
The USB4 sideband access is slow compared to the high-speed link and the
access timing parameters are tens of milliseconds according the spec. To
avoid too much unnecessary polling for the sideband pass the wait delay
to usb4_port_wait_for_bit() and use larger (5ms) value compared to the
high-speed access.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
We check for -EOPNOTSUPP but tb_xdp_handle_error() translated it to
-ENOTSUPP instead which is dealt as "transient" error and retried after
a while. Fix this so that we bail out early when the other side clearly
tells us it is does not support this.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Currently USB3 tunnel setup fails if USB4 link available bandwidth is too low
to allow USB3 Maximum Supported Link Rate. In reality, this limitation is not
needed, and may cause failure of USB3 tunnel establishment, if USB4 link
available bandwidth is lower than USB3 Maximum Supported Link Rate. E.g. if we
connect to USB4 v1 host router, a USB4 v1 device router, via 10 Gb/s cable.
Hence, here we discard this limitation, and now we only limit USB3 bandwidth
allocation to be not higher than 90% of USB3 Max Supported Link Rate (for first
USB3 tunnel only).
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Currently, when setup a new USB3 tunnel that is starting from downstream USB3
adapter of first depth router (or deeper), to upstream USB3 adapter of a second
depth router (or deeper), we calculate consumed bandwidth. For this calculation
we take into account first USB3 tunnel consumed bandwidth while we shouldn't,
because we just recalculating the first USB3 tunnel allocated bandwidth.
Fix that, so that more bandwidth is available for the new USB3 tunnel being
setup.
While there, fix the kernel-doc to decribe more accurately the purpose of the
function.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Currently we notify PM core about occurred wakes after any resume. This
is not actually needed after resume from runtime suspend. Hence, notify
PM core about occurred wakes only after resume from system sleep. Also,
if the wake occurred in USB4 router upstream port, we don't notify the
PM core about it since it is not actually needed and can cause
unexpected autowake (e.g. if /sys/power/wakeup_count is used).
While there add the missing kernel-doc for tb_switch_resume().
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Currently we don't configure correctly the wake events after unplug of device
router. What can happen is that the downstream ports of host router will be
configured to wake on: USB4-wake and wake-on-disconnect, but not on
wake-on-connect. This may cause the later plugged device not to wake the
domain and fail in enumeration. Fix this by clearing downstream port's "USB4
Port is Configured" bit, after unplug of a device router.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Intel Maple Ridge supports NVM firmware upgrade with the same flows used
on previous discrete Thunderbolt contollers from Intel (such as Titan
Ridge). Advertise NVM upgrade support for Maple Ridge in icm_probe() to
expose the corresponding files in /sys/bus/thunderbolt. The NVM firmware
process was successfully tested on a system with a JHL8540 controller
(ASUS ProArt Z790-CREATOR).
Signed-off-by: Alex James <git@alextjam.es>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Probably due to a firmware bug Dell TB16 dock announces that one of its
DisplayPort adapters is actually DP IN. Now this is possible and used
with some external GPUs but not likely in this case as we are dealing
with a dock. Anyways the problem is that the driver tries to create a
DisplayPort tunnel between adapters of the same router which then shows
to user that there is no picture on the display (because there are no
available DP OUT adapters on the dock anymore).
Fix this by not creating DisplayPort tunnels between adapters that are
on the same router.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10265
Fixes: 274baf695b ("thunderbolt: Add DP IN added last in the head of the list of DP resources")
Cc: Gil Fine <gil.fine@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.9-rc1. Lots
of tiny changes and forward progress to support new hardware and
better support for existing devices. Included in here are:
- Thunderbolt (i.e. USB4) updates for newer hardware and uses as more
people start to use the hardware
- default USB authentication mode Kconfig and documentation update to
make it more obvious what is going on
- USB typec updates and enhancements
- usual dwc3 driver updates
- usual xhci driver updates
- function USB (i.e. gadget) driver updates and additions
- new device ids for lots of drivers
- loads of other small updates, full details in the shortlog
All of these, including a "last minute regression fix" have been in
linux-next with no reported issues"
* tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (185 commits)
usb: usb-acpi: Fix oops due to freeing uninitialized pld pointer
usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin
usb: gadget: tegra-xudc: Fix USB3 PHY retrieval logic
phy: tegra: xusb: Add API to retrieve the port number of phy
USB: gadget: pxa27x_udc: Remove unused of_gpio.h
usb: gadget/snps_udc_plat: Remove unused of_gpio.h
usb: ohci-pxa27x: Remove unused of_gpio.h
usb: sl811-hcd: only defined function checkdone if QUIRK2 is defined
usb: Clarify expected behavior of dev_bin_attrs_are_visible()
xhci: Allow RPM on the USB controller (1022:43f7) by default
usb: isp1760: remove SLAB_MEM_SPREAD flag usage
usb: misc: onboard_hub: use pointer consistently in the probe function
usb: gadget: fsl: Increase size of name buffer for endpoints
usb: gadget: fsl: Add of device table to enable module autoloading
usb: typec: tcpm: add support to set tcpc connector orientatition
usb: typec: tcpci: add generic tcpci fallback compatible
dt-bindings: usb: typec-tcpci: add tcpci fallback binding
usb: gadget: fsl-udc: Replace custom log wrappers by dev_{err,warn,dbg,vdbg}
usb: core: Set connect_type of ports based on DT node
dt-bindings: usb: Add downstream facing ports to realtek binding
...
Mika writes:
thunderbolt: Changes for v6.9 merge window
This includes following USB4/Thunderbolt changes for the v6.9 merge
window:
- Reset the topology also for USB4 v1 routers on driver load
- DisplayPort tunneling and bandwidth allocation mode improvements
- Tracepoint support for the control channel
- Couple of minor fixes and cleanups.
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: (23 commits)
thunderbolt: Constify the struct device_type usage
thunderbolt: Add trace events support for the control channel
thunderbolt: Keep the domain powered when USB4 port is in redrive mode
thunderbolt: Improve DisplayPort tunnel setup process to be more robust
thunderbolt: Calculate DisplayPort tunnel bandwidth after DPRX capabilities read
thunderbolt: Reserve released DisplayPort bandwidth for a group for 10 seconds
thunderbolt: Introduce tb_tunnel_direction_downstream()
thunderbolt: Re-order bandwidth group functions
thunderbolt: Fail the failed bandwidth request properly
thunderbolt: Log an error if DPTX request is not cleared
thunderbolt: Handle bandwidth allocation mode disable request
thunderbolt: Re-calculate estimated bandwidth when allocation mode is enabled
thunderbolt: Use DP_LOCAL_CAP for maximum bandwidth calculation
thunderbolt: Correct typo in host_reset parameter
thunderbolt: Skip discovery also in USB4 v2 host
thunderbolt: Reset only non-USB4 host routers in resume
thunderbolt: Remove usage of the deprecated ida_simple_xx() API
thunderbolt: Fix rollback in tb_port_lane_bonding_enable() for lane 1
thunderbolt: Fix XDomain rx_lanes_show and tx_lanes_show
thunderbolt: Reset topology created by the boot firmware
...
