[ Upstream commit c5fd399a24 ]
mac80211 identifies a short beacon by the presence of the next
TBTT field, however the standard actually doesn't explicitly state that
the next TBTT can't be in a long beacon or even that it is required in
a short beacon - and as a result this validation does not work for all
vendor implementations.
The standard explicitly states that an S1G long beacon shall contain
the S1G beacon compatibility element as the first element in a beacon
transmitted at a TBTT that is not a TSBTT (Target Short Beacon
Transmission Time) as per IEEE80211-2024 11.1.3.10.1. This is validated
by 9.3.4.3 Table 9-76 which states that the S1G beacon compatibility
element is only allowed in the full set and is not allowed in the
minimum set of elements permitted for use within short beacons.
Correctly identify short beacons by the lack of an S1G beacon
compatibility element as the first element in an S1G beacon frame.
Fixes: 9eaffe5078 ("cfg80211: convert S1G beacon to scan results")
Signed-off-by: Simon Wadsworth <simon@morsemicro.com>
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250701075541.162619-1-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e1f706fc2 ]
S1G beacons are not traditional beacons but a type of extension frame.
Extension frames contain the frame control and duration fields, followed
by zero or more optional fields before the frame body. These optional
fields are distinct from the variable length elements.
The presence of optional fields is indicated in the frame control field.
To correctly locate the elements offset, the frame control must be parsed
to identify which optional fields are present. Currently, mac80211 parses
S1G beacons based on fixed assumptions about the frame layout, without
inspecting the frame control field. This can result in incorrect offsets
to the "variable" portion of the frame.
Properly parse S1G beacon frames by using the field lengths defined in
IEEE 802.11-2024, section 9.3.4.3, ensuring that the elements offset is
calculated accurately.
Fixes: 9eaffe5078 ("cfg80211: convert S1G beacon to scan results")
Fixes: cd418ba63f ("mac80211: convert S1G beacon to scan results")
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250603053538.468562-1-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
Instead of passing the full TPE elements, in all their glory
and mixed up data formats for HE backward compatibility, parse
them fully into the right values, and pass that to the drivers.
Also introduce proper validation already in mac80211, so that
drivers don't need to do it, and parse the EHT portions.
The code now passes the values in the right order according to
the channel used by an interface, which could also be a subset
of the data advertised by the AP, if we couldn't connect with
the full bandwidth (for whatever reason.)
Also add kunit tests for the more complicated bits of it.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240506214536.2aa839969b60.I265b28209e0b29772b2f125f7f83de44a4da877b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The define IEEE80211_MAX_NUM_PWR_LEVEL doesn't make much
sense. Yes, that table has a maximum value of 8, and the
table will actually remain that way, but EHT introduced
a way to encode more levels for 320 MHz channels.
Remove IEEE80211_MAX_NUM_PWR_LEVEL and, for ath11k being
the only user, add ATH11K_NUM_PWR_LEVELS, where it makes
sense since it cannot support 320 MHz channels.
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240506214536.9818e5471055.Icece7e47e963d6b68e0d97ba13c102b37fbaa689@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For selecting what link(s) out of the usable ones
to activate, calculate a grade for a given link.
Calculation of a link grade is done as follows:
1. get the estimated throughput according to the RSSI of the link, this
will be the base grade
2. get the channel load from the BSS Load Element, subtracting the load
caused by us. Apply the factor on the grade.
3. puncturing factor: calculate the percentage of the punctured
subchannels (out of the total subchannels). Apply this on the grade.
The link grading will be used by the link selection mechanism in a later
patch.
Also add KUnit tests for it.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240416134215.a6799dbd5643.If137ca6dc443606c7d8c99ec1fc38b325003a7c1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If intending to associate with a lower bandwidth, remove capabilities
related to 320 MHz from the EHT capabilities element. Also change the
EHT MCS-NSS set accordingly: if just reducing 320->160 or similar the
format doesn't change, just cut off the last bytes. If changing from
higher bandwidth to 20 MHz only EHT STA, adjust the format.
Note that this also requires adjusting the caller in mlme.c since the
data written can now be shorter than it determined. We need to clean
all that up. Since the other callers pass NULL for the conn limit, we
don't need to change things there.
Link: https://msgid.link/20240129202041.b5f6df108c77.I0d8ea04079c61cb3744cc88625eeaf0d4776dc2b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Kalle Valo says:
====================
wireless-next patches for v6.8
The third "new features" pull request for v6.8. This is a smaller one
to clear up our tree before the break and nothing really noteworthy
this time.
Major changes:
stack
* cfg80211: introduce cfg80211_ssid_eq() for SSID matching
* cfg80211: support P2P operation on DFS channels
* mac80211: allow 64-bit radiotap timestamps
iwlwifi
* AX210: allow concurrent P2P operation on DFS channels
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
For vendor action frames, whether a protected one should be
used or not is clearly up to the individual vendor and frame,
so even though a protected dual is defined, it may not get
used. Thus, don't require protection for vendor action frames
when they're used in a connection.
Since we obviously don't process frames unknown to the kernel
in the kernel, it may makes sense to invert this list to have
all the ones the kernel processes and knows to be requiring
protection, but that'd be a different change.
Fixes: 91535613b6 ("wifi: mac80211: don't drop all unprotected public action frames")
Reported-by: Jouni Malinen <j@w1.fi>
Link: https://msgid.link/20231206223801.f6a2cf4e67ec.Ifa6acc774bd67801d3dafb405278f297683187aa@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Kalle Valo says:
====================
wireless-next patches for v6.7
The third, and most likely the last, features pull request for v6.7.
Fixes all over and only few small new features.
Major changes:
iwlwifi
- more Multi-Link Operation (MLO) work
ath12k
- QCN9274: mesh support
ath11k
- firmware-2.bin container file format support
* tag 'wireless-next-2023-10-26' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (155 commits)
wifi: ray_cs: Remove unnecessary (void*) conversions
Revert "wifi: ath11k: call ath11k_mac_fils_discovery() without condition"
wifi: ath12k: Introduce and use ath12k_sta_to_arsta()
wifi: ath12k: fix htt mlo-offset event locking
wifi: ath12k: fix dfs-radar and temperature event locking
wifi: ath11k: fix gtk offload status event locking
wifi: ath11k: fix htt pktlog locking
wifi: ath11k: fix dfs radar event locking
wifi: ath11k: fix temperature event locking
wifi: ath12k: rename the sc naming convention to ab
wifi: ath12k: rename the wmi_sc naming convention to wmi_ab
wifi: ath11k: add firmware-2.bin support
wifi: ath11k: qmi: refactor ath11k_qmi_m3_load()
wifi: rtw89: cleanup firmware elements parsing
wifi: rt2x00: rework MT7620 PA/LNA RF calibration
wifi: rt2x00: rework MT7620 channel config function
wifi: rt2x00: improve MT7620 register initialization
MAINTAINERS: wifi: rt2x00: drop Helmut Schaa
wifi: wlcore: main: replace deprecated strncpy with strscpy
wifi: wlcore: boot: replace deprecated strncpy with strscpy
...
====================
Link: https://lore.kernel.org/r/20231026090411.B2426C433CB@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support antenna control for injection by parsing the antenna
radiotap field (which may be presented multiple times) and
telling the driver about the resulting antenna bitmap. Of
course there's no guarantee the driver will actually honour
this, just like any other injection control.
If misconfigured, i.e. the injected HT/VHT MCS needs more
chains than antennas are configured, the bitmap is reset to
zero, indicating no selection.
For now this is only set up for two anntenas so we keep more
free bits, but that can be trivially extended if any driver
implements support for it that can deal with hardware with
more antennas.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230920211508.f71001aa4da9.I00ccb762a806ea62bc3d728fa3a0d29f4f285eeb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The kernel-doc script identified multiple issues in ieee80211.h, so
fix them. In the process update some references to the latest
applicable specification.
include/linux/ieee80211.h:848: warning: Function parameter or member 'count' not described in 'ieee80211_quiet_ie'
include/linux/ieee80211.h:848: warning: Function parameter or member 'period' not described in 'ieee80211_quiet_ie'
include/linux/ieee80211.h:848: warning: Function parameter or member 'duration' not described in 'ieee80211_quiet_ie'
include/linux/ieee80211.h:848: warning: Function parameter or member 'offset' not described in 'ieee80211_quiet_ie'
include/linux/ieee80211.h:860: warning: Function parameter or member 'token' not described in 'ieee80211_msrment_ie'
include/linux/ieee80211.h:860: warning: Function parameter or member 'mode' not described in 'ieee80211_msrment_ie'
include/linux/ieee80211.h:860: warning: Function parameter or member 'type' not described in 'ieee80211_msrment_ie'
include/linux/ieee80211.h:860: warning: Function parameter or member 'request' not described in 'ieee80211_msrment_ie'
include/linux/ieee80211.h:871: warning: Function parameter or member 'mode' not described in 'ieee80211_channel_sw_ie'
include/linux/ieee80211.h:871: warning: Function parameter or member 'new_ch_num' not described in 'ieee80211_channel_sw_ie'
include/linux/ieee80211.h:871: warning: Function parameter or member 'count' not described in 'ieee80211_channel_sw_ie'
include/linux/ieee80211.h:883: warning: Function parameter or member 'mode' not described in 'ieee80211_ext_chansw_ie'
include/linux/ieee80211.h:883: warning: Function parameter or member 'new_operating_class' not described in 'ieee80211_ext_chansw_ie'
include/linux/ieee80211.h:883: warning: Function parameter or member 'new_ch_num' not described in 'ieee80211_ext_chansw_ie'
include/linux/ieee80211.h:883: warning: Function parameter or member 'count' not described in 'ieee80211_ext_chansw_ie'
include/linux/ieee80211.h:905: warning: Function parameter or member 'mesh_ttl' not described in 'ieee80211_mesh_chansw_params_ie'
include/linux/ieee80211.h:905: warning: Function parameter or member 'mesh_flags' not described in 'ieee80211_mesh_chansw_params_ie'
include/linux/ieee80211.h:905: warning: Function parameter or member 'mesh_reason' not described in 'ieee80211_mesh_chansw_params_ie'
include/linux/ieee80211.h:905: warning: Function parameter or member 'mesh_pre_value' not described in 'ieee80211_mesh_chansw_params_ie'
include/linux/ieee80211.h:913: warning: Function parameter or member 'new_channel_width' not described in 'ieee80211_wide_bw_chansw_ie'
include/linux/ieee80211.h:913: warning: Function parameter or member 'new_center_freq_seg0' not described in 'ieee80211_wide_bw_chansw_ie'
include/linux/ieee80211.h:913: warning: Function parameter or member 'new_center_freq_seg1' not described in 'ieee80211_wide_bw_chansw_ie'
include/linux/ieee80211.h:926: warning: expecting prototype for struct ieee80211_tim. Prototype was for struct ieee80211_tim_ie instead
include/linux/ieee80211.h:941: warning: Function parameter or member 'meshconf_psel' not described in 'ieee80211_meshconf_ie'
include/linux/ieee80211.h:941: warning: Function parameter or member 'meshconf_pmetric' not described in 'ieee80211_meshconf_ie'
include/linux/ieee80211.h:941: warning: Function parameter or member 'meshconf_congest' not described in 'ieee80211_meshconf_ie'
include/linux/ieee80211.h:941: warning: Function parameter or member 'meshconf_synch' not described in 'ieee80211_meshconf_ie'
include/linux/ieee80211.h:941: warning: Function parameter or member 'meshconf_auth' not described in 'ieee80211_meshconf_ie'
include/linux/ieee80211.h:941: warning: Function parameter or member 'meshconf_form' not described in 'ieee80211_meshconf_ie'
include/linux/ieee80211.h:941: warning: Function parameter or member 'meshconf_cap' not described in 'ieee80211_meshconf_ie'
include/linux/ieee80211.h:964: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* mesh channel switch parameters element's flag indicator
include/linux/ieee80211.h:984: warning: Function parameter or member 'rann_flags' not described in 'ieee80211_rann_ie'
include/linux/ieee80211.h:984: warning: Function parameter or member 'rann_hopcount' not described in 'ieee80211_rann_ie'
include/linux/ieee80211.h:984: warning: Function parameter or member 'rann_ttl' not described in 'ieee80211_rann_ie'
include/linux/ieee80211.h:984: warning: Function parameter or member 'rann_addr' not described in 'ieee80211_rann_ie'
include/linux/ieee80211.h:984: warning: Function parameter or member 'rann_seq' not described in 'ieee80211_rann_ie'
include/linux/ieee80211.h:984: warning: Function parameter or member 'rann_interval' not described in 'ieee80211_rann_ie'
include/linux/ieee80211.h:984: warning: Function parameter or member 'rann_metric' not described in 'ieee80211_rann_ie'
include/linux/ieee80211.h:1019: warning: expecting prototype for enum ieee80211_opmode_bits. Prototype was for enum ieee80211_vht_opmode_bits instead
include/linux/ieee80211.h:1052: warning: Function parameter or member 'tx_power' not described in 'ieee80211_tpc_report_ie'
include/linux/ieee80211.h:1052: warning: Function parameter or member 'link_margin' not described in 'ieee80211_tpc_report_ie'
include/linux/ieee80211.h:1073: warning: Function parameter or member 'compat_info' not described in 'ieee80211_s1g_bcn_compat_ie'
include/linux/ieee80211.h:1073: warning: Function parameter or member 'beacon_int' not described in 'ieee80211_s1g_bcn_compat_ie'
include/linux/ieee80211.h:1073: warning: Function parameter or member 'tsf_completion' not described in 'ieee80211_s1g_bcn_compat_ie'
include/linux/ieee80211.h:1086: warning: Function parameter or member 'ch_width' not described in 'ieee80211_s1g_oper_ie'
include/linux/ieee80211.h:1086: warning: Function parameter or member 'oper_class' not described in 'ieee80211_s1g_oper_ie'
include/linux/ieee80211.h:1086: warning: Function parameter or member 'primary_ch' not described in 'ieee80211_s1g_oper_ie'
include/linux/ieee80211.h:1086: warning: Function parameter or member 'oper_ch' not described in 'ieee80211_s1g_oper_ie'
include/linux/ieee80211.h:1086: warning: Function parameter or member 'basic_mcs_nss' not described in 'ieee80211_s1g_oper_ie'
include/linux/ieee80211.h:1097: warning: Function parameter or member 'aid' not described in 'ieee80211_aid_response_ie'
include/linux/ieee80211.h:1097: warning: Function parameter or member 'switch_count' not described in 'ieee80211_aid_response_ie'
include/linux/ieee80211.h:1097: warning: Function parameter or member 'response_int' not described in 'ieee80211_aid_response_ie'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_STATUS' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_MINOR_REASON' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_CAPABILITY' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_DEVICE_ID' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_GO_INTENT' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_GO_CONFIG_TIMEOUT' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_LISTEN_CHANNEL' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_GROUP_BSSID' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_EXT_LISTEN_TIMING' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_INTENDED_IFACE_ADDR' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_MANAGABILITY' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_CHANNEL_LIST' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_ABSENCE_NOTICE' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_DEVICE_INFO' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_GROUP_INFO' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_GROUP_ID' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_INTERFACE' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_OPER_CHANNEL' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_INVITE_FLAGS' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_VENDOR_SPECIFIC' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_MAX' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1554: warning: Function parameter or member 'frame_control' not described in 'ieee80211_bar'
include/linux/ieee80211.h:1554: warning: Function parameter or member 'duration' not described in 'ieee80211_bar'
include/linux/ieee80211.h:1554: warning: Function parameter or member 'ra' not described in 'ieee80211_bar'
include/linux/ieee80211.h:1554: warning: Function parameter or member 'ta' not described in 'ieee80211_bar'
include/linux/ieee80211.h:1554: warning: Function parameter or member 'control' not described in 'ieee80211_bar'
include/linux/ieee80211.h:1554: warning: Function parameter or member 'start_seq_num' not described in 'ieee80211_bar'
include/linux/ieee80211.h:1579: warning: Function parameter or member 'reserved' not described in 'ieee80211_mcs_info'
include/linux/ieee80211.h:1618: warning: Function parameter or member 'cap_info' not described in 'ieee80211_ht_cap'
include/linux/ieee80211.h:1618: warning: Function parameter or member 'ampdu_params_info' not described in 'ieee80211_ht_cap'
include/linux/ieee80211.h:1618: warning: Function parameter or member 'mcs' not described in 'ieee80211_ht_cap'
include/linux/ieee80211.h:1618: warning: Function parameter or member 'extended_ht_cap_info' not described in 'ieee80211_ht_cap'
include/linux/ieee80211.h:1618: warning: Function parameter or member 'tx_BF_cap_info' not described in 'ieee80211_ht_cap'
include/linux/ieee80211.h:1618: warning: Function parameter or member 'antenna_selection_info' not described in 'ieee80211_ht_cap'
include/linux/ieee80211.h:1704: warning: Function parameter or member 'primary_chan' not described in 'ieee80211_ht_operation'
include/linux/ieee80211.h:1704: warning: Function parameter or member 'ht_param' not described in 'ieee80211_ht_operation'
include/linux/ieee80211.h:1704: warning: Function parameter or member 'operation_mode' not described in 'ieee80211_ht_operation'
include/linux/ieee80211.h:1704: warning: Function parameter or member 'stbc_param' not described in 'ieee80211_ht_operation'
include/linux/ieee80211.h:1704: warning: Function parameter or member 'basic_set' not described in 'ieee80211_ht_operation'
include/linux/ieee80211.h:1872: warning: Function parameter or member 'mac_cap_info' not described in 'ieee80211_he_cap_elem'
include/linux/ieee80211.h:1872: warning: Function parameter or member 'phy_cap_info' not described in 'ieee80211_he_cap_elem'
include/linux/ieee80211.h:1936: warning: Function parameter or member 'he_oper_params' not described in 'ieee80211_he_operation'
include/linux/ieee80211.h:1936: warning: Function parameter or member 'he_mcs_nss_set' not described in 'ieee80211_he_operation'
include/linux/ieee80211.h:1936: warning: Function parameter or member 'optional' not described in 'ieee80211_he_operation'
include/linux/ieee80211.h:1948: warning: Function parameter or member 'he_sr_control' not described in 'ieee80211_he_spr'
include/linux/ieee80211.h:1948: warning: Function parameter or member 'optional' not described in 'ieee80211_he_spr'
include/linux/ieee80211.h:1960: warning: Function parameter or member 'aifsn' not described in 'ieee80211_he_mu_edca_param_ac_rec'
include/linux/ieee80211.h:1960: warning: Function parameter or member 'ecw_min_max' not described in 'ieee80211_he_mu_edca_param_ac_rec'
include/linux/ieee80211.h:1960: warning: Function parameter or member 'mu_edca_timer' not described in 'ieee80211_he_mu_edca_param_ac_rec'
include/linux/ieee80211.h:1974: warning: Function parameter or member 'mu_qos_info' not described in 'ieee80211_mu_edca_param_set'
include/linux/ieee80211.h:1974: warning: Function parameter or member 'ac_be' not described in 'ieee80211_mu_edca_param_set'
include/linux/ieee80211.h:1974: warning: Function parameter or member 'ac_bk' not described in 'ieee80211_mu_edca_param_set'
include/linux/ieee80211.h:1974: warning: Function parameter or member 'ac_vi' not described in 'ieee80211_mu_edca_param_set'
include/linux/ieee80211.h:1974: warning: Function parameter or member 'ac_vo' not described in 'ieee80211_mu_edca_param_set'
include/linux/ieee80211.h:2194: warning: Enum value 'IEEE80211_REG_LPI_AP' not described in enum 'ieee80211_ap_reg_power'
include/linux/ieee80211.h:2194: warning: Enum value 'IEEE80211_REG_SP_AP' not described in enum 'ieee80211_ap_reg_power'
include/linux/ieee80211.h:2194: warning: Enum value 'IEEE80211_REG_VLP_AP' not described in enum 'ieee80211_ap_reg_power'
include/linux/ieee80211.h:2194: warning: Excess enum value 'IEEE80211_REG_SP' description in 'ieee80211_ap_reg_power'
include/linux/ieee80211.h:2194: warning: Excess enum value 'IEEE80211_REG_VLP' description in 'ieee80211_ap_reg_power'
include/linux/ieee80211.h:2194: warning: Excess enum value 'IEEE80211_REG_LPI' description in 'ieee80211_ap_reg_power'
include/linux/ieee80211.h:2577: warning: cannot understand function prototype: 'struct ieee80211_he_6ghz_oper '
include/linux/ieee80211.h:2624: warning: Function parameter or member 'tx_power_info' not described in 'ieee80211_tx_pwr_env'
include/linux/ieee80211.h:2624: warning: Function parameter or member 'tx_power' not described in 'ieee80211_tx_pwr_env'
include/linux/ieee80211.h:4485: warning: expecting prototype for RSNX Capabilities(). Prototype was for WLAN_RSNX_CAPA_PROTECTED_TWT() instead
include/linux/ieee80211.h:4734: warning: expecting prototype for ieee80211_mle_get_eml_sync_delay(). Prototype was for ieee80211_mle_get_eml_med_sync_delay() instead
117 warnings as Errors
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20230822-kerneldoc-v1-1-0d42ce5029bf@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The complete profile bit together with the NSTR link pair
present bit indicate whether or not the NSTR bitmap is,
the NSTR bitmap size just indicates how big it is.
Fixes: 7b6f08771b ("wifi: ieee80211: Support validating ML station profile length")
Fixes: 5c1f97537b ("wifi: mac80211: store BSS param change count from assoc response")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
