commit cf33f0b7df upstream.
Commit f316cdff8d ("clk: Annotate struct clk_hw_onecell_data with
__counted_by") annotated the hws member of 'struct clk_hw_onecell_data'
with __counted_by, which informs the bounds sanitizer (UBSAN_BOUNDS)
about the number of elements in .hws[], so that it can warn when .hws[]
is accessed out of bounds. As noted in that change, the __counted_by
member must be initialized with the number of elements before the first
array access happens, otherwise there will be a warning from each access
prior to the initialization because the number of elements is zero. This
occurs in exynos_clkout_probe() due to .num being assigned after .hws[]
has been accessed:
UBSAN: array-index-out-of-bounds in drivers/clk/samsung/clk-exynos-clkout.c:178:18
index 0 is out of range for type 'clk_hw *[*]'
Move the .num initialization to before the first access of .hws[],
clearing up the warning.
Cc: stable@vger.kernel.org
Fixes: f316cdff8d ("clk: Annotate struct clk_hw_onecell_data with __counted_by")
Reported-by: Jochen Sprickerhof <jochen@sprickerhof.de>
Closes: https://lore.kernel.org/aSIYDN5eyKFKoXKL@eldamar.lan/
Tested-by: Jochen Sprickerhof <jochen@sprickerhof.de>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f0e6bc0c3e ]
CP110 based platforms rely on the bootloader for pci port
initialization.
TF-A actively prevents non-uboot re-configuration of pci lanes, and many
boards do not have software control over the pci card reset.
If a pci port had link at boot-time and the clock is stopped at a later
point, the link fails and can not be recovered.
PCI controller driver probe - and by extension ownership of a driver for
the pci clocks - may be delayed especially on large modular kernels,
causing the clock core to start disabling unused clocks.
Add the CLK_IGNORE_UNUSED flag to the three pci port's clocks to ensure
they are not stopped before the pci controller driver has taken
ownership and tested for an existing link.
This fixes failed pci link detection when controller driver probes late,
e.g. with arm64 defconfig and CONFIG_PHY_MVEBU_CP110_COMPHY=m.
Closes: https://lore.kernel.org/r/b71596c7-461b-44b6-89ab-3cfbd492639f@solid-run.com
Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b276445e98 ]
Some keystone clock drivers can be selected when COMPILE_TEST is
enabled but since commit b745c0794e ("clk: keystone: Add sci-clk
driver support") they are never actually built.
Enable compile testing by allowing the build system to process the
keystone drivers.
Fixes: b745c0794e ("clk: keystone: Add sci-clk driver support")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8def051bb ]
The current code uses of_iomap() to map registers but never calls
iounmap() on any error path after the mapping. This causes a memory
leak when probe fails after successful ioremap, for example when
of_clk_add_provider() or r9a06g032_add_clk_domain() fails.
Replace of_iomap() with devm_of_iomap() to automatically unmap the
region on probe failure. Update the error check accordingly to use
IS_ERR() and PTR_ERR() since devm_of_iomap() returns ERR_PTR on error.
Fixes: 4c3d88526e ("clk: renesas: Renesas R9A06G032 clock driver")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251030061603.1954-1-vulab@iscas.ac.cn
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a76ce61d72 ]
When a consumer turns on/off a power domain dependent on another power
domain in hardware, the parent power domain shall be turned on/off by
the power domain provider as well, and to get it the power domain hardware
hierarchy shall be described in the CAMCC driver.
Establish the power domain hierarchy with a Titan GDSC set as a parent of
all other GDSC power domains provided by the SM6350 camera clock controller
to enforce a correct sequence of enabling and disabling power domains by
the consumers, this fixes the CAMCC as a supplier of power domains to CAMSS
IP and its driver.
Fixes: 80f5451d9a ("clk: qcom: Add camera clock controller driver for SM6350")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20251021234450.2271279-3-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b91401af6c ]
On R-Car V4H, the PCIEC controller DBI read would generate an SError in
case the controller reset is released by writing SRSTCLR register first,
and immediately afterward reading some PCIEC controller DBI register.
The issue triggers in rcar_gen4_pcie_additional_common_init() on
dw_pcie_readl_dbi(dw, PCIE_PORT_LANE_SKEW), which on V4H is the first
read after reset_control_deassert(dw->core_rsts[DW_PCIE_PWR_RST].rstc).
The reset controller which contains the SRSTCLR register and the PCIEC
controller which contains the DBI register share the same root access
bus, but the bus then splits into separate segments before reaching each
IP. Even if the SRSTCLR write access was posted on the bus before the
DBI read access, it seems the DBI read access may reach the PCIEC
controller before the SRSTCLR write completed, and trigger the SError.
Mitigate the issue by adding a dummy SRSTCLR read, which assures the
SRSTCLR write completes fully and is latched into the reset controller,
before the PCIEC DBI read access can occur.
Fixes: 0ab55cf183 ("clk: renesas: cpg-mssr: Add support for R-Car V4H")
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250922162113.113223-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d37ca1482 ]
In a subsequent patch, the registration callback will need more parameters
from cpg_mssr_priv (like another base address with clock controllers
with double register block, and also, notifiers and rmw_lock).
Instead of adding more parameters, move the needed parameters to a public
sub-struct.
Instead moving clks to this structure, which would have implied to add
an allocation (and cleanup) for it, keep the way the allocation is done
and just have a copy of the pointer in the public structure.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thierry Bultel <thierry.bultel.yh@bp.renesas.com>
Link: https://lore.kernel.org/20250515141828.43444-5-thierry.bultel.yh@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Stable-dep-of: b91401af6c ("clk: renesas: cpg-mssr: Read back reset registers to assure values latched")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f710e3bc5 ]
The spinlock in rzg2l_mod_clock_endisable() is intended to protect
RMW-accesses to the hardware register. There is no need to protect
instructions that set temporary variables which will be written
afterwards to a hardware register. With this only one write to one
clock register is executed thus locking/unlocking rmw_lock is removed.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230929053915.1530607-7-claudiu.beznea@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Stable-dep-of: b91401af6c ("clk: renesas: cpg-mssr: Read back reset registers to assure values latched")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62abfd7bed ]
R-Car V4H Reference Manual R19UH0186EJ0130 Rev.1.30 Apr. 21, 2025 page
583 Figure 9.3.1(a) Software Reset flow (A) as well as flow (B) / (C)
indicate after reset has been asserted by writing a matching reset bit
into register SRCR, it is mandatory to wait 1ms.
This 1ms delay is documented on R-Car V4H and V4M, it is currently
unclear whether S4 is affected as well. This patch does apply the extra
delay on R-Car S4 as well.
Fix the reset driver to respect the additional delay when toggling
resets. Drivers which use separate reset_control_(de)assert() must
assure matching delay in their driver code.
Fixes: 0ab55cf183 ("clk: renesas: cpg-mssr: Add support for R-Car V4H")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250918030552.331389-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e0d75258b ]
As described in AM335x Errata Advisory 1.0.42, WKUP_DEBUGSS_CLKCTRL
can't be disabled - the clock module will just be stuck in transitioning
state forever, resulting in the following warning message after the wait
loop times out:
l3-aon-clkctrl:0000:0: failed to disable
Just add the clock to enable_init_clks, so no attempt is made to disable
it.
Signed-off-by: Matthias Schiffer <matthias.schiffer@tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af98caeaa7 ]
This register is important for sequencing the commands to PLLs, so
actually write the update bits with regmap_write_bits() instead of
relying on a read/modify/write regmap command that could skip the actual
hardware write if the value is identical to the one read.
It's changed when modification is needed to the PLL, when
read-only operation is done, we could keep the call to
regmap_update_bits().
Add a comment to the sam9x60_div_pll_set_div() function that uses this
PLL_UPDT register so that it's used consistently, according to the
product's datasheet.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Tested-by: Ryan Wanner <ryan.wanner@microchip.com> # on sama7d65 and sam9x75
Link: https://lore.kernel.org/r/20250827150811.82496-1-nicolas.ferre@microchip.com
[claudiu.beznea: fix "Alignment should match open parenthesis"
checkpatch.pl check]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0237f5635 ]
A potential divider for the master clock is div/3. The register
configuration for div/3 is MASTER_PRES_MAX. The current bit shifting
method does not work for this case. Checking for MASTER_PRES_MAX will
ensure the correct decimal value is stored in the system.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7aa8781f37 ]
The A523's RTC block is backward compatible with the R329's, but it also
has a calibration function for its internal oscillator, which would
allow it to provide a clock rate closer to the desired 32.768 KHz. This
is useful on the Radxa Cubie A5E, which does not have an external 32.768
KHz crystal.
Add new compatible-specific data for it.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250909170947.2221611-1-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 49ef649110 ]
struct tegra_bpmp::clocks is a pointer to a dynamically allocated array
of pointers to 'struct tegra_bpmp_clk'.
But the size of the allocated area is calculated like it is an array
containing actual 'struct tegra_bpmp_clk' objects - it's not true, there
are just pointers.
Found by Linux Verification Center (linuxtesting.org) with Svace static
analysis tool.
Fixes: 2db12b15c6 ("clk: tegra: Register clocks from root to leaf")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1624dead9a ]
The conditional check for the PLL0 multiplier 'm' used a logical AND
instead of OR, making the range check ineffective. This patch replaces
&& with || to correctly reject invalid values of 'm' that are either
less than or equal to 0 or greater than LPC18XX_PLL0_MSEL_MAX.
This ensures proper bounds checking during clk rate setting and rounding.
Fixes: b04e0b8fd5 ("clk: add lpc18xx cgu clk driver")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
[sboyd@kernel.org: 'm' is unsigned so remove < condition]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b46a3d323a ]
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Stable-dep-of: 1624dead9a ("clk: nxp: Fix pll0 rate check condition in LPC18xx CGU driver")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e121370a7 ]
The `flags` in |struct mtk_mux| are core clk flags, not mux clk flags.
Passing one to the other is wrong.
Since there aren't any actual users adding CLK_MUX_* flags, just drop it
for now.
Fixes: b05ea33143 ("clk: mediatek: clk-mux: Add .determine_rate() callback")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c4c26b624 ]
The infrastructure gate for the HDMI specific crystal needs the
top_hdmi_xtal clock to be configured in order to ungate the 26m
clock to the HDMI IP, and it wouldn't work without.
Reparent the infra_ao_hdmi_26m clock to top_hdmi_xtal to fix that.
Fixes: e2edf59dec ("clk: mediatek: Add MT8195 infrastructure clock support")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47b13635da ]
determine_rate() is expected to return an error code, or 0 on success.
clk_sam9x5_peripheral_determine_rate() has a branch that returns the
parent rate on a certain case. This is the behavior of round_rate(),
so let's go ahead and fix this by setting req->rate.
Fixes: b4c115c761 ("clk: at91: clk-peripheral: add support for changeable parent rate")
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8ab346f99 ]
The de clock is marked with CLK_SET_RATE_PARENT, which is really not
necessary (as confirmed from experimentation) and significantly
restricts flexibility for other clocks using the same parent.
In addition the source selection (parent) field is marked as using
2 bits, when it the documentation reports that it uses 3.
Fix both issues in the de clock definition.
Fixes: d0f11d14b0 ("clk: sunxi-ng: add support for V3s CCU")
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Link: https://patch.msgid.link/20250704154008.3463257-1-paulk@sys-base.io
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3b0abc443a ]
If registration of pll_post is failed, it will be set to NULL or ERR,
unregistering same will fail with following call trace:
Unable to handle kernel NULL pointer dereference at virtual address 008
pc : clk_hw_unregister+0xc/0x20
lr : clk_hw_unregister_fixed_factor+0x18/0x30
sp : ffff800011923850
...
Call trace:
clk_hw_unregister+0xc/0x20
clk_hw_unregister_fixed_factor+0x18/0x30
xvcu_unregister_clock_provider+0xcc/0xf4 [xlnx_vcu]
xvcu_probe+0x2bc/0x53c [xlnx_vcu]
Fixes: 4472e1849d ("soc: xilinx: vcu: make pll post divider explicit")
Signed-off-by: Rohit Visavalia <rohit.visavalia@amd.com>
Link: https://lore.kernel.org/r/20250210113614.4149050-2-rohit.visavalia@amd.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 596a977b34 ]
The ddrphy is supplied by the dpll, but due to the limited number of PLLs
on the rk3036, the dpll also is used for other periperhals, like the GPU.
So it happened, when the Lima driver turned off the gpu clock, this in
turn also disabled the dpll and thus the ram.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250503202532.992033-4-heiko@sntech.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d988b0b866 ]
Compared to the msm-4.19 driver the mainline GDSC driver always sets the
bits for en_rest, en_few & clk_dis, and if those values are not set
per-GDSC in the respective driver then the default value from the GDSC
driver is used. The downstream driver only conditionally sets
clk_dis_wait_val if qcom,clk-dis-wait-val is given in devicetree.
Correct this situation by explicitly setting those values. For all GDSCs
the reset value of those bits are used, with the exception of
gpu_cx_gdsc which has an explicit value (qcom,clk-dis-wait-val = <8>).
Fixes: 013804a727 ("clk: qcom: Add GPU clock controller driver for SM6350")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20250425-sm6350-gdsc-val-v1-4-1f252d9c5e4e@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit afdfd829a9 ]
Compared to the msm-4.19 driver the mainline GDSC driver always sets the
bits for en_rest, en_few & clk_dis, and if those values are not set
per-GDSC in the respective driver then the default value from the GDSC
driver is used. The downstream driver only conditionally sets
clk_dis_wait_val if qcom,clk-dis-wait-val is given in devicetree.
Correct this situation by explicitly setting those values. For all GDSCs
the reset value of those bits are used.
Fixes: 131abae905 ("clk: qcom: Add SM6350 GCC driver")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20250425-sm6350-gdsc-val-v1-3-1f252d9c5e4e@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 673989d271 ]
Compared to the msm-4.19 driver the mainline GDSC driver always sets the
bits for en_rest, en_few & clk_dis, and if those values are not set
per-GDSC in the respective driver then the default value from the GDSC
driver is used. The downstream driver only conditionally sets
clk_dis_wait_val if qcom,clk-dis-wait-val is given in devicetree.
Correct this situation by explicitly setting those values. For all GDSCs
the reset value of those bits are used.
Fixes: 837519775f ("clk: qcom: Add display clock controller driver for SM6350")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20250425-sm6350-gdsc-val-v1-2-1f252d9c5e4e@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e7b1c13280 ]
Compared to the msm-4.19 driver the mainline GDSC driver always sets the
bits for en_rest, en_few & clk_dis, and if those values are not set
per-GDSC in the respective driver then the default value from the GDSC
driver is used. The downstream driver only conditionally sets
clk_dis_wait_val if qcom,clk-dis-wait-val is given in devicetree.
Correct this situation by explicitly setting those values. For all GDSCs
the reset value of those bits are used.
Fixes: 80f5451d9a ("clk: qcom: Add camera clock controller driver for SM6350")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20250425-sm6350-gdsc-val-v1-1-1f252d9c5e4e@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3e14c7207a upstream.
With UBSAN enabled, we're getting the following trace:
UBSAN: array-index-out-of-bounds in .../drivers/clk/clk-s2mps11.c:186:3
index 0 is out of range for type 'struct clk_hw *[] __counted_by(num)' (aka 'struct clk_hw *[]')
This is because commit f316cdff8d ("clk: Annotate struct
clk_hw_onecell_data with __counted_by") annotated the hws member of
that struct with __counted_by, which informs the bounds sanitizer about
the number of elements in hws, so that it can warn when hws is accessed
out of bounds.
As noted in that change, the __counted_by member must be initialised
with the number of elements before the first array access happens,
otherwise there will be a warning from each access prior to the
initialisation because the number of elements is zero. This occurs in
s2mps11_clk_probe() due to ::num being assigned after ::hws access.
Move the assignment to satisfy the requirement of assign-before-access.
Cc: stable@vger.kernel.org
Fixes: f316cdff8d ("clk: Annotate struct clk_hw_onecell_data with __counted_by")
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250326-s2mps11-ubsan-v1-1-fcc6fce5c8a9@linaro.org
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 98e6da673c ]
The D1/R528/T113 SoCs have a hidden divider of 2 in the MMC mod clocks,
just as other recent SoCs. So far we did not describe that, which led
to the resulting MMC clock rate to be only half of its intended value.
Use a macro that allows to describe a fixed post-divider, to compensate
for that divisor.
This brings the MMC performance on those SoCs to its expected level,
so about 23 MB/s for SD cards, instead of the 11 MB/s measured so far.
Fixes: 35b97bb941 ("clk: sunxi-ng: Add support for the D1 SoC clocks")
Reported-by: Kuba Szczodrzyński <kuba@szczodrzynski.pl>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250501120631.837186-1-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 06a61b5cb6 ]
The IMX8MPCEC datasheet lists maximum frequencies allowed for different
modules. Some of these limits are universal, but some depend on
whether the SoC is operating in nominal or in overdrive mode.
The imx8mp.dtsi currently assumes overdrive mode and configures some
clocks in accordance with this. Boards wishing to make use of nominal
mode will need to override some of the clock rates manually.
As operating the clocks outside of their allowed range can lead to
difficult to debug issues, it makes sense to register the maximum rates
allowed in the driver, so the CCF can take them into account.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Link: https://lore.kernel.org/r/20250218-imx8m-clk-v4-6-b7697dc2dcd0@pengutronix.de
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b20150d499 ]
of_clk_get_hw_from_clkspec() checks all available clock-providers by
comparing their of nodes to the one from the clkspec. If no matching
clock provider is found, the function returns -EPROBE_DEFER to cause a
re-check at a later date. If a matching clock provider is found, an
authoritative answer can be retrieved from it whether the clock exists
or not.
This does not take into account that the clock-provider may never
appear, because it's node is disabled. This can happen when a clock is
optional, provided by a separate block which never gets enabled.
One example of this happening is the rk3588's VOP, which has optional
additional display clocks coming from PLLs inside the hdmiphy blocks.
These can be used for better rates, but the system will also work
without them.
The problem around that is described in the followups to[1]. As we
already know the of node of the presumed clock provider, add a check via
of_device_is_available() whether this is a "valid" device node. This
prevents eternal defer loops.
Link: https://lore.kernel.org/dri-devel/20250215-vop2-hdmi1-disp-modes-v1-3-81962a7151d6@collabora.com/ [1]
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250222223733.2990179-1-heiko@sntech.de
[sboyd@kernel.org: Reword commit text a bit]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 16b86e5c03 ]
Refactor SD MUX driver to be able to reuse the same code on RZ/G3S.
RZ/G2{L,UL} has a limitation with regards to switching the clock source
for SD MUX (MUX clock source has to be switched to 266MHz before
switching b/w 533MHz and 400MHz). Rework the handling of this limitation
to use a clock notifier that is registered according to platform based
initialization data, so the SD MUX code can be reused on RZ/G3S.
As RZ/G2{L,UL} and RZ/G3S use different bits in different registers to
check if the clock switching has been done, this configuration (register
offset, register bits and bitfield width) is now passed through struct
cpg_core_clk::sconf (status configuration) from platform specific
initialization code.
Along with struct cpg_core_clk::sconf the mux table indices are also
passed from platform specific initialization code.
Also, mux flags are now passed to DEF_SD_MUX() as they will be used
later by RZ/G3S.
CPG_WEN_BIT macro has been introduced to select properly the WEN bit
of various registers.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231006103959.197485-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Stable-dep-of: 7f22a298d9 ("clk: renesas: r9a07g043: Fix HP clock source for RZ/Five")
Signed-off-by: Sasha Levin <sashal@kernel.org>
