For device mode, if PM runtime autosuspend feature enabled, the
runtime power status of dwc3 may be suspended when run dwc3_resume(),
and dwc3 gadget would not be configured in dwc3_gadget_run_stop().
It would cause gadget connected failed if USB cable has been plugged
before PM resume. So move forward pm_runtime_set_active() to fix it.
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Link: https://lore.kernel.org/r/20231206065939.16958-1-frank.wang@rock-chips.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Support configuration and use of bulk endpoints in the so-called EBC
mode described in the DBC_usb31 databook (appendix E)
Added a bit fifo_mode to usb_ep to indicate to the UDC driver that a
specific endpoint is to operate in the EBC (or equivalent) mode when
enabled
Added macros for bits 15 and 14 of DEPCFG parameter 1 to indicate EBC
mode and write back behaviour. These bits will be set to 1 when
configuring an EBC endpoint as described in the programming guide
Signed-off-by: Manan Aurora <maurora@google.com>
Link: https://lore.kernel.org/r/20231031034641.660606-1-maurora@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor tcpm_fw_get_caps to support the multiple pd capabilities got
from fwnode. For backward compatibility, the original single capability
is still applicable. The fetched data is stored in the newly defined
structure "pd_data" and there is an array "pd_list" to store the
pointers to them. A dedicated array "pds" is used to store the handles
of the registered usb_power_delivery instances.
Also implement the .pd_get and .pd_set ops which are introduced in
commit a7cff92f06 ("usb: typec: USB Power Delivery helpers for ports
and partners"). Once the .pd_set is called, the current capability will
be updated and state machine will re-negotiate the power contract if
possible.
Signed-off-by: Kyle Tso <kyletso@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20231216104630.2720818-3-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 662a60102c ("usb: typec: Separate USB Power Delivery from USB
Type-C") allows userspace to configure the PD of a port by selecting
different set of predefined PD capabilities. Define the PD capability
sets in DT for better configurability in device modules.
Define an optional child node "capabilities" to contain multiple USB
Power Delivery capabilities.
Define child nodes with pattern (e.g. caps-0, caps-1) under
"capabilities". Each node contains PDO data of a selectable Power
Delivery capability.
Also define common properties for source-pdos, sink-pdos, and
op-sink-microwatt that can be referenced.
Signed-off-by: Kyle Tso <kyletso@google.com>
Link: https://lore.kernel.org/r/20231205030114.1349089-2-kyletso@google.com
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231216104630.2720818-2-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The xhci retaining bogus hardware states cause usb disconnect devices
connected before hibernation(s4) and refer to the commit 'f3d478858be
("usb: ohci-platform: fix usb disconnect issue after s4")' which set
flag "hibernated" as true when resume-from-hibernation and that the
drivers will reset the hardware to get rid of any existing state and
make sure resume from hibernation re-enumerates everything for xhci.
Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Link: https://lore.kernel.org/r/20231228071113.1719-1-zhuyinbo@loongson.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently for dwc3_usb31 controller, if maximum_speed is limited to
super-speed in DT, then device mode is limited to SS, but host mode
still works in SSP.
The documentation for max-speed property is as follows:
"Tells USB controllers we want to work up to a certain speed.
Incase this isn't passed via DT, USB controllers should default to
their maximum HW capability."
It doesn't specify that the property is only for device mode.
There are cases where we need to limit the host's maximum speed to
SuperSpeed only. Use this property for host mode to contrain host's
speed to SuperSpeed.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20231219041559.15789-1-quic_kriskura@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Current implementation blocks the running operations when Plug-out and
Plug-In is performed continuously, process gets stuck in
dwc3_thread_interrupt().
Code Flow:
CPU1
->Gadget_start
->dwc3_interrupt
->dwc3_thread_interrupt
->dwc3_process_event_buf
->dwc3_process_event_entry
->dwc3_endpoint_interrupt
->dwc3_ep0_interrupt
->dwc3_ep0_inspect_setup
->dwc3_ep0_stall_and_restart
By this time if pending_list is not empty, it will get the next request
on the given list and calls dwc3_gadget_giveback which will unmap request
and call its complete() callback to notify upper layers that it has
completed. Currently dwc3_gadget_giveback status is set to -ECONNRESET,
whereas it should be -ESHUTDOWN based on condition if not dwc->connected
is true.
Cc: <stable@vger.kernel.org>
Fixes: d742220b35 ("usb: dwc3: ep0: giveback requests on stall_and_restart")
Signed-off-by: Uttkarsh Aggarwal <quic_uaggarwa@quicinc.com>
Link: https://lore.kernel.org/r/20231222094704.20276-1-quic_uaggarwa@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A freezable kernel thread can enter frozen state during freezing by
either calling try_to_freeze() or using wait_event_freezable() and its
variants. So for the following snippet of code in a kernel thread loop:
wait_event_interruptible_timeout();
try_to_freeze();
We can change it to a simple wait_event_freezable_timeout() and
then eliminate a function call.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Link: https://lore.kernel.org/r/20231218074730.1898699-1-haokexin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The check for sending the vsc infopacket to the display was gated behind
PSR (Panel Self Refresh) being enabled.
The vsc infopacket also contains the colorimetry (specifically the
container color gamut) information for the stream on modern DP.
PSR is typically only supported on mobile phone eDP displays, thus this
was not getting sent for typical desktop monitors or TV screens.
This functionality is needed for proper HDR10 functionality on DP as it
wants BT2020 RGB/YCbCr for the container color space.
Cc: stable@vger.kernel.org
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Xaver Hugl <xaver.hugl@gmail.com>
Cc: Melissa Wen <mwen@igalia.com>
Fixes: 15f9dfd545 ("drm/amd/display: Register Colorspace property for DP and HDMI")
Tested-by: Simon Berz <simon@berz.me>
Tested-by: Xaver Hugl <xaver.hugl@kde.org>
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pull netfs updates from David Howells:
A few follow-up fixes for the netfs work for this cycle.
* tag 'netfs-lib-20240104' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
netfs: Fix proc/fs/fscache symlink to point to "netfs" not "../netfs"
netfs: Rearrange netfs_io_subrequest to put request pointer first
9p: Use length of data written to the server in preference to error
9p: Do a couple of cleanups
9p: Fix initialisation of netfs_inode for 9p
cachefiles: Fix __cachefiles_prepare_write()
Signed-off-by: Christian Brauner <brauner@kernel.org>
Current EP0 dequeue path will share the same as other EPs. However, there
are some special considerations that need to be made for EP0 transfers:
- EP0 transfers never transition into the started_list
- EP0 only has one active request at a time
In case there is a vendor specific control message for a function over USB
FFS, then there is no guarantee on the timeline which the DATA/STATUS stage
is responded to. While this occurs, any attempt to end transfers on
non-control EPs will end up having the DWC3_EP_DELAY_STOP flag set, and
defer issuing of the end transfer command. If the USB FFS application
decides to timeout the control transfer, or if USB FFS AIO path exits, the
USB FFS driver will issue a call to usb_ep_dequeue() for the ep0 request.
In case of the AIO exit path, the AIO FS blocks until all pending USB
requests utilizing the AIO path is completed. However, since the dequeue
of ep0 req does not happen properly, all non-control EPs with the
DWC3_EP_DELAY_STOP flag set will not be handled, and the AIO exit path will
be stuck waiting for the USB FFS data endpoints to receive a completion
callback.
Fix is to utilize dwc3_ep0_reset_state() in the dequeue API to ensure EP0
is brought back to the SETUP state, and ensures that any deferred end
transfer commands are handled. This also will end any active transfers
on EP0, compared to the previous implementation which directly called
giveback only.
Fixes: fcd2def663 ("usb: dwc3: gadget: Refactor dwc3_gadget_ep_dequeue")
Cc: stable <stable@kernel.org>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20231206201814.32664-1-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
when the slave_get function pointer belongs to the struct vme_bridge
member is NULL, it prompts that the detailed function name
"vme_slave_set" equivalent to __func__ not supported.
it is similar to the vme_slave_get function:
when vme_bridge->slave_set function pointer is NULL to print detailed
function name by using __func__.
Signed-off-by: Piro Yang <piroyangg@gmail.com>
Link: https://lore.kernel.org/r/20231227154739.6951-1-piroyangg@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In v9fs_upload_to_server(), we pass the error to netfslib to terminate the
subreq rather than the amount of data written - even if we did actually
write something.
Further, we assume that the write is always entirely done if successful -
but it might have been partially complete - as returned by
p9_client_write(), but we ignore that.
Fix this by indicating the amount written by preference and only returning
the error if we didn't write anything.
(We might want to return both in future if both are available as this
might be useful as to whether we retry or not.)
Suggested-by: Dominique Martinet <asmadeus@codewreck.org>
Link: https://lore.kernel.org/r/ZZULNQAZ0n0WQv7p@codewreck.org/
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Dominique Martinet <asmadeus@codewreck.org>
cc: Eric Van Hensbergen <ericvh@kernel.org>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: v9fs@lists.linux.dev
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Merge a PNP update for 6.8-rc1:
- Adjust pnpacpi_parse_allocated_vendor() to use memcpy() on a full
structure field (Dmitry Antipov).
* pnp:
PNP: ACPI: fix fortify warning
Merge in arm64 fixes queued for 6.7 so that kpti_install_ng_mappings()
can be updated to use arm64_kernel_unmapped_at_el0() instead of checking
the ARM64_UNMAP_KERNEL_AT_EL0 CPU capability directly.
* for-next/fixes:
arm64: mm: Always make sw-dirty PTEs hw-dirty in pte_modify
perf/arm-cmn: Fail DTC counter allocation correctly
arm64: Avoid enabling KPTI unnecessarily
* for-next/sysregs:
arm64/sysreg: Add missing system instruction definitions for FGT
arm64/sysreg: Add missing system register definitions for FGT
arm64/sysreg: Add missing ExtTrcBuff field definition to ID_AA64DFR0_EL1
arm64/sysreg: Add missing Pauth_LR field definitions to ID_AA64ISAR1_EL1
arm64/sysreg: Add new system registers for GCS
arm64/sysreg: Add definition for FPMR
arm64/sysreg: Update HCRX_EL2 definition for DDI0601 2023-09
arm64/sysreg: Update SCTLR_EL1 for DDI0601 2023-09
arm64/sysreg: Update ID_AA64SMFR0_EL1 definition for DDI0601 2023-09
arm64/sysreg: Add definition for ID_AA64FPFR0_EL1
arm64/sysreg: Add definition for ID_AA64ISAR3_EL1
arm64/sysreg: Update ID_AA64ISAR2_EL1 defintion for DDI0601 2023-09
arm64/sysreg: Add definition for ID_AA64PFR2_EL1
arm64/sysreg: update CPACR_EL1 register
arm64/sysreg: add system register POR_EL{0,1}
arm64/sysreg: Add definition for HAFGRTR_EL2
arm64/sysreg: Update HFGITR_EL2 definiton to DDI0601 2023-09
* for-next/selftests:
kselftest/arm64: Don't probe the current VL for unsupported vector types
kselftest/arm64: Log SVCR when the SME tests barf
kselftest/arm64: Improve output for skipped TPIDR2 ABI test
* for-next/lpa2-prep:
arm64: mm: get rid of kimage_vaddr global variable
arm64: mm: Take potential load offset into account when KASLR is off
arm64: kernel: Disable latent_entropy GCC plugin in early C runtime
arm64: Add ARM64_HAS_LPA2 CPU capability
arm64/mm: Add FEAT_LPA2 specific ID_AA64MMFR0.TGRAN[2]
arm64/mm: Update tlb invalidation routines for FEAT_LPA2
arm64/mm: Add lpa2_is_enabled() kvm_lpa2_is_enabled() stubs
arm64/mm: Modify range-based tlbi to decrement scale
* for-next/kbuild:
efi/libstub: zboot: do not use $(shell ...) in cmd_copy_and_pad
arm64: properly install vmlinuz.efi
arm64: replace <asm-generic/export.h> with <linux/export.h>
arm64: vdso32: rename 32-bit debug vdso to vdso32.so.dbg
* for-next/early-idreg-overrides:
arm64/kernel: Move 'nokaslr' parsing out of early idreg code
arm64: idreg-override: Avoid kstrtou64() to parse a single hex digit
arm64: idreg-override: Avoid sprintf() for simple string concatenation
arm64: idreg-override: avoid strlen() to check for empty strings
arm64: idreg-override: Avoid parameq() and parameqn()
arm64: idreg-override: Prepare for place relative reloc patching
arm64: idreg-override: Omit non-NULL checks for override pointer
* for-next/cpufeature:
arm64: Align boot cpucap handling with system cpucap handling
arm64: Cleanup system cpucap handling
arm64: Kconfig: drop KAISER reference from KPTI option description
arm64: mm: Only map KPTI trampoline if it is going to be used
arm64: Get rid of ARM64_HAS_NO_HW_PREFETCH
Frank Wang
Manan Aurora
Kyle Tso
Yinbo Zhu
Krishna Kurapati
Uttkarsh Aggarwal
Kevin Hao
Asad Kamal
Joshua Ashton
Alex Deucher
Christian Brauner
Wesley Cheng
Basavaraj Natikar
Greg Kroah-Hartman
Tree Davies
Piro Yang
Naresh Solanki
David Howells
Rafael J. Wysocki
Will Deacon