In case of concurrent calling to the bin file writing, use the mutex
to avoid allocating the temporary buffer more than once.
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clamp the buffer postion to write by setting the bin attribute
to the maximum buffer size so that VFS layer will block the
out-of-bounds accessing.
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Change psp_copy_fw from void to int: return -ENODEV when drm_dev_enter
fails, and -EINVAL when the image size is zero or larger than the
1 MiB PSP private buffer.
Replace open-coded memset/memcpy into fw_pri_buf with psp_copy_fw.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix this by skipping the sysfs disable mapping when the GPU is
currently undergoing a reset or suspend flow.
Additionally, add debug logging in psp_ptl_invoke() to better
trace PTL state and format queries/updates cmd.
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move amdgpu_amdkfd_stop/start_sched calls from kfd_ptl_control()
into amdgpu_ptl_perf_monitor_ctrl() so all PTL callers (KFD ioctl,
sysfs, GFX init) get consistent scheduling management.
Add amdgpu_amdkfd_stop/start_sched_all() wrappers to stop and
restart KFD scheduling on all nodes without assuming node ID ordering.
v3:
* call start/stop for PTL Set Only
v2:
* move the stop/start sched function to
amdgpu_ptl_perf_monitor_ctrl(Lijo)
* add wrapper amdgpu_amdkfd_stop_sched_all and
amdgpu_amdkfd_start_sched_all (Lijo)
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GC 9.4.4 uses SPI busy status for idle detection instead of GRBM GUI_ACTIVE.
Add version check to use SPI_BUSY for 9.4.4 while keeping GRBM_STATUS
GUI_ACTIVE check for other GC versions.
v2: move this check into amdgpu_ptl_perf_monitor_ctrl(Lijo)
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add an explicit check on cmd->resp.status after psp_cmd_submit_buf()
returns to ensure PTL state is only updated on actual success.
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use a bitmap to track PTL disable requests from sysfs and profiler.
PTL is only re-enabled once all sources have released their disable
requests, avoiding premature enablement.
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Introduce a Peak Tops Limiter (PTL) driver that dynamically caps
engine frequency to ensure delivered TOPS never exceeds a defined
TOPS_limit. This initial implementation provides core data structures
and kernel-space interfaces (set/get, enable/disable) to manage PTL state.
PTL performs a firmware handshake to initialize its state and update
predefined format types. It supports updating these format types at
runtime while user-space tools automatically switch PTL state, and
also allows explicitly switching PTL state via newly added commands.
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Tune the sleep interval in the PSP fence wait loop from 10-100us to
60-100us.This adjustment results in an overall wait window of 1.2s
(60us * 20000 iterations) to 2 seconds (100us * 20000 iterations),
which guarantees that we can retrieve the correct fence value
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In SRIOV, guest drivers no longer setup/destory
VMR starting from mp0 v11_0_7.
In bare-metal, if boot-time TMR is enabled, some
generation (e.g., mp0 v13_0_x) don’t need runtime
TMR allocation but still require SETUP_TMR command
with tmr address 0 for backward compatibility.
some newer generations require neither SETUP_TMR nor
DESTROY_TMR and will return errors if they are sent.
Driver relies on boot_time_tmr and autoload_supported
to handle these cases correctly.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add psp_v15_0_8.c for MPASP 15.0.8
v2: drop memory training intf as they are only
necessary for GDDR memory
v3: Implement psp_v15_0_8_get_fw_type (Feifei)
Signed-off-by: Le Ma <le.ma@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In psp 15.0.8, mes and sdma GFX_FW_TYPE have been changed.
Define a psp common function: psp_get_fw_type().
Hide the GFX_FW_TYPE Changes in each ip's psp->funcs_get_fw_type callback.
(like psp_v15_0_8_get_fw_type()).
If no GFX_FW_TYPE change, reuse the amdgpu_psp_get_fw_type().
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The amd-smi tool relies on extended peer link information to report xgmi
link metrics. The necessary xgmi ta command, GET_EXTEND_PEER_LINKS, has
been enabled in the host driver and this change is necessary for the
guest to make use of it. To handle the case where the host driver does
not have the latest xgmi ta, the guest driver checks for guest support
through a pf2vf feature flag before invoking psp.
Signed-off-by: Will Aitken <wiaitken@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_xgmi_fill_topology_info and psp_xgmi_reflect_topology_info
perform the same logic of copying topology info of one node to every
other node in the hive. Instead of having two functions that purport to
do the same thing, this refactoring moves the logic of the fill function
to the reflect function and adds reflecting port number info as well for
complete functionality.
Signed-off-by: Will Aitken <wiaitken@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
commit c760bcda83 ("drm/amd: Check whether secure display TA loaded
successfully") attempted to fix extra messages, but failed to port the
cleanup that was in commit 5c6d52ff4b ("drm/amd: Don't try to enable
secure display TA multiple times") to prevent multiple tries.
Add that to the failure handling path even on a quick failure.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4679
Fixes: c760bcda83 ("drm/amd: Check whether secure display TA loaded successfully")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Not all renoir hardware supports secure display. If the TA is present
but the feature isn't supported it will fail to load or send commands.
This shows ERR messages to the user that make it seems like there is
a problem.
[How]
Check the resp_status of the context to see if there was an error
before trying to send any secure display commands.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/1415
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently the kzalloc failure check just sets reports the failure
and sets the variable ret to -ENOMEM, which is not checked later
for this specific error. Fix this by just returning -ENOMEM rather
than setting ret.
Fixes: 4fb9307154 ("drm/amd/amdgpu: remove redundant host to psp cmd buf allocations")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
AMDGPU_HAS_VRAM is redundant with is_app_apu, as both refer to
APUs with no carve-out. Since AMDGPU_HAS_VRAM only occurs once,
remove AMDGPU_HAS_VRAM definition. The tmr allocation can be covered
with AMDGPU_GEM_DOMAIN_GTT | AMDGPU_GEM_DOMAIN_VRAM in both vram and
non vram ASICs.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's not necessarily to allocate psp firmware private
buffer in different memory domain in sriov and bare
metal environment
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The fw reserved GFX command is only supported starting from PSP fw
version 0x3a0e14 and 0x3b0e0d. Older versions do not support this command.
Add a version guard to ensure the command is only used when the running
PSP fw meets the minimum version requirement.
This ensures backward compatibility and safe operation across fw
revisions.
Fixes: a3b7f9c306 ("drm/amdgpu: reclaim psp fw reservation memory region")
Signed-off-by: Frank Min <Frank.Min@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 065e23170a)
The fw reserved GFX command is only supported starting from PSP fw
version 0x3a0e14 and 0x3b0e0d. Older versions do not support this command.
Add a version guard to ensure the command is only used when the running
PSP fw meets the minimum version requirement.
This ensures backward compatibility and safe operation across fw
revisions.
Fixes: a3b7f9c306 ("drm/amdgpu: reclaim psp fw reservation memory region")
Signed-off-by: Frank Min <Frank.Min@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pull drm updates from Dave Airlie:
"Highlights:
- Intel xe enable Panthor Lake, started adding WildCat Lake
- amdgpu has a bunch of reset improvments along with the usual IP
updates
- msm got VM_BIND support which is important for vulkan sparse memory
- more drm_panic users
- gpusvm common code to handle a bunch of core SVM work outside
drivers.
Detail summary:
Changes outside drm subdirectory:
- 'shrink_shmem_memory()' for better shmem/hibernate interaction
- Rust support infrastructure:
- make ETIMEDOUT available
- add size constants up to SZ_2G
- add DMA coherent allocation bindings
- mtd driver for Intel GPU non-volatile storage
- i2c designware quirk for Intel xe
core:
- atomic helpers: tune enable/disable sequences
- add task info to wedge API
- refactor EDID quirks
- connector: move HDR sink to drm_display_info
- fourcc: half-float and 32-bit float formats
- mode_config: pass format info to simplify
dma-buf:
- heaps: Give CMA heap a stable name
ci:
- add device tree validation and kunit
displayport:
- change AUX DPCD access probe address
- add quirk for DPCD probe
- add panel replay definitions
- backlight control helpers
fbdev:
- make CONFIG_FIRMWARE_EDID available on all arches
fence:
- fix UAF issues
format-helper:
- improve tests
gpusvm:
- introduce devmem only flag for allocation
- add timeslicing support to GPU SVM
ttm:
- improve eviction
sched:
- tracing improvements
- kunit improvements
- memory leak fixes
- reset handling improvements
color mgmt:
- add hardware gamma LUT handling helpers
bridge:
- add destroy hook
- switch to reference counted drm_bridge allocations
- tc358767: convert to devm_drm_bridge_alloc
- improve CEC handling
panel:
- switch to reference counter drm_panel allocations
- fwnode panel lookup
- Huiling hl055fhv028c support
- Raspberry Pi 7" 720x1280 support
- edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK
- simple: AUO P238HAN01
- st7701: Winstar wf40eswaa6mnn0
- visionox: rm69299-shift
- Renesas R61307, Renesas R69328 support
- DJN HX83112B
hdmi:
- add CEC handling
- YUV420 output support
xe:
- WildCat Lake support
- Enable PanthorLake by default
- mark BMG as SRIOV capable
- update firmware recommendations
- Expose media OA units
- aux-bux support for non-volatile memory
- MTD intel-dg driver for non-volatile memory
- Expose fan control and voltage regulator in sysfs
- restructure migration for multi-device
- Restore GuC submit UAF fix
- make GEM shrinker drm managed
- SRIOV VF Post-migration recovery of GGTT nodes
- W/A additions/reworks
- Prefetch support for svm ranges
- Don't allocate managed BO for each policy change
- HWMON fixes for BMG
- Create LRC BO without VM
- PCI ID updates
- make SLPC debugfs files optional
- rework eviction rejection of bound external BOs
- consolidate PAT programming logic for pre/post Xe2
- init changes for flicker-free boot
- Enable GuC Dynamic Inhibit Context switch
i915:
- drm_panic support for i915/xe
- initial flip queue off by default for LNL/PNL
- Wildcat Lake Display support
- Support for DSC fractional link bpp
- Support for simultaneous Panel Replay and Adaptive sync
- Support for PTL+ double buffer LUT
- initial PIPEDMC event handling
- drm_panel_follower support
- DPLL interface renames
- allocate struct intel_display dynamically
- flip queue preperation
- abstract DRAM detection better
- avoid GuC scheduling stalls
- remove DG1 force probe requirement
- fix MEI interrupt handler on RT kernels
- use backlight control helpers for eDP
- more shared display code refactoring
amdgpu:
- add userq slot to INFO ioctl
- SR-IOV hibernation support
- Suspend improvements
- Backlight improvements
- Use scaling for non-native eDP modes
- cleaner shader updates for GC 9.x
- Remove fence slab
- SDMA fw checks for userq support
- RAS updates
- DMCUB updates
- DP tunneling fixes
- Display idle D3 support
- Per queue reset improvements
- initial smartmux support
amdkfd:
- enable KFD on loongarch
- mtype fix for ext coherent system memory
radeon:
- CS validation additional GL extensions
- drop console lock during suspend/resume
- bump driver version
msm:
- VM BIND support
- CI: infrastructure updates
- UBWC single source of truth
- decouple GPU and KMS support
- DP: rework I/O accessors
- DPU: SM8750 support
- DSI: SM8750 support
- GPU: X1-45 support and speedbin support for X1-85
- MDSS: SM8750 support
nova:
- register! macro improvements
- DMA object abstraction
- VBIOS parser + fwsec lookup
- sysmem flush page support
- falcon: generic falcon boot code and HAL
- FWSEC-FRTS: fb setup and load/execute
ivpu:
- Add Wildcat Lake support
- Add turbo flag
ast:
- improve hardware generations implementation
imx:
- IMX8qxq Display Controller support
lima:
- Rockchip RK3528 GPU support
nouveau:
- fence handling cleanup
panfrost:
- MT8370 support
- bo labeling
- 64-bit register access
qaic:
- add RAS support
rockchip:
- convert inno_hdmi to a bridge
rz-du:
- add RZ/V2H(P) support
- MIPI-DSI DCS support
sitronix:
- ST7567 support
sun4i:
- add H616 support
tidss:
- add TI AM62L support
- AM65x OLDI bridge support
bochs:
- drm panic support
vkms:
- YUV and R* format support
- use faux device
vmwgfx:
- fence improvements
hyperv:
- move out of simple
- add drm_panic support"
* tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel: (1479 commits)
drm/tidss: oldi: convert to devm_drm_bridge_alloc() API
drm/tidss: encoder: convert to devm_drm_bridge_alloc()
drm/amdgpu: move reset support type checks into the caller
drm/amdgpu/sdma7: re-emit unprocessed state on ring reset
drm/amdgpu/sdma6: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5.2: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5: re-emit unprocessed state on ring reset
drm/amdgpu/gfx12: re-emit unprocessed state on ring reset
drm/amdgpu/gfx11: re-emit unprocessed state on ring reset
drm/amdgpu/gfx10: re-emit unprocessed state on ring reset
drm/amdgpu/gfx9.4.3: re-emit unprocessed state on kcq reset
drm/amdgpu/gfx9: re-emit unprocessed state on kcq reset
drm/amdgpu: Add WARN_ON to the resource clear function
drm/amd/pm: Use cached metrics data on SMUv13.0.6
drm/amd/pm: Use cached data for min/max clocks
gpu: nova-core: fix bounds check in PmuLookupTableEntry::new
drm/amdgpu: Replace HQD terminology with slots naming
drm/amdgpu: Add user queue instance count in HW IP info
drm/amd/amdgpu: Add helper functions for isp buffers
drm/amd/amdgpu: Initialize swnode for ISP MFD device
...
For extended wait with retries on a PSP register value, add a noverbose
flag to avoid excessive error messages on each timeout.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of checking the response flag, use status mask also to check
against any unexpected failures like a device drop. Also, log error if
waiting on a psp response fails/times out.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need the driver-core fixes that are in 6.16-rc3 into here as well
to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PSP v14 fw update introduced changes on memory reservation region, according
to the change driver reclaim some non-reserved region.
1. introduce 2 new psp commands to query fw reservation regions
2. add a new reservation region for psp
3. reclaim psp non-used region
Signed-off-by: Frank Min <Frank.Min@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kanala Ramalingeswara Reddy
Shiwu Zhang
Candice Li
Perry Yuan
Feifei Xu
Likun Gao
Lijo Lazar
Le Ma
Linus Torvalds
Kees Cook
Mangesh Gadre
Ce Sun
Hawking Zhang
Pratik Vishwakarma
Will Aitken
Mario Limonciello
Colin Ian King
Dave Airlie
Yifan Zhang
Frank Min
Greg Kroah-Hartman