dwc3_gadget_suspend() takes dwc->lock with IRQs disabled and then calls
dwc3_disconnect_gadget(). For async callbacks that helper only uses
plain spin_unlock()/spin_lock(), so the gadget ->disconnect() callback
still runs with IRQs disabled and any sleepable callback trips Lockdep.
This issue was found by our static analysis tool and then manually
reviewed against the current tree.
The grounded PoC kept the dwc3_gadget_suspend() ->
dwc3_disconnect_gadget() -> gadget_driver->disconnect() chain, and
Lockdep reported:
BUG: sleeping function called from invalid context
gadget_disconnect+0x21/0x39 [vuln_msv]
dwc3_gadget_suspend.constprop.0+0x2b/0x42 [vuln_msv]
Keep the disconnect callback selection in one common helper, but add a
sleepable suspend-side wrapper which snapshots the callback under
dwc->lock and then runs it after spin_unlock_irqrestore(). The regular
event path still uses the existing spin_unlock()/spin_lock() window.
Fixes: c8540870af ("usb: dwc3: gadget: Improve dwc3_gadget_suspend() and dwc3_gadget_resume()")
Cc: stable <stable@kernel.org>
Signed-off-by: Runyu Xiao <runyu.xiao@seu.edu.cn>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260612052005.3849659-1-runyu.xiao@seu.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dwc3_ulpi_setup() calls the register read and write calls with
dwc3->regs when both these calls take the dwc3 structure directly.
Chnage these two calls to fix the following sparse warning, and
possibly a nasty bug in the dwc3_ulpi_setup() code:
drivers/usb/dwc3/core.c:796:45: warning: incorrect type in argument 1 (different address spaces)
drivers/usb/dwc3/core.c:796:45: expected struct dwc3 *dwc
drivers/usb/dwc3/core.c:796:45: got void [noderef] __iomem *regs
drivers/usb/dwc3/core.c:798:40: warning: incorrect type in argument 1 (different address spaces)
drivers/usb/dwc3/core.c:798:40: expected struct dwc3 *dwc
drivers/usb/dwc3/core.c:798:40: got void [noderef] __iomem *regs
Cc: stable <stable@kernel.org>
Fixes: 9accc68b1c ("usb: dwc3: Add dwc pointer to dwc3_readl/writel")
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Link: https://patch.msgid.link/20260703162033.2847599-1-ben.dooks@codethink.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If dwc3_meson_g12a_resume() succeeds in calling
reset_control_reset(), an internal triggered_count reference is
acquired. If any later step fails (usb_init, phy_init,
phy_power_on, regulator_enable, or usb_post_init), the function
returns the error without rearming the reset control. This leaks
the reference and leaves the reset control in a triggered state,
causing future reset_control_reset() calls to incorrectly return
early as if already reset.
Add an error path that calls reset_control_rearm() to balance
the reference before returning the error.
Cc: stable <stable@kernel.org>
Fixes: 5b0ba0caaf ("usb: dwc3: meson-g12a: refactor usb init")
Signed-off-by: WenTao Liang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20260611131121.81784-1-vulab@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The kernel-doc comment for dwc3_alloc_event_buffers states that the
function "Allocates @num event buffers", but the function does not have
a @num parameter and only allocates a single event buffer.
Remove the misleading "@num" reference from the brief description to
accurately reflect the function's behavior.
Signed-off-by: Shuping Bu <bushuping007@163.com>
Link: https://patch.msgid.link/20260520055023.2415635-1-bushuping007@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Linux Version Code is currently written to the GUID register before
PHY initialization. Certain PHY implementations (such as Synopsys eUSB
PHY performing link_sw_reset) clear the GUID register to its default
value during initialization, causing the kernel version information to
be lost.
Move the GUID register programming to occur after PHY initialization
completes to ensure the Linux version information persists.
Fixes: fa0ea13e9f ("usb: dwc3: core: write LINUX_VERSION_CODE to our GUID register")
Cc: stable <stable@kernel.org>
Reported-by: Pritam Manohar Sutar <pritam.sutar@samsung.com>
Signed-off-by: Selvarasu Ganesan <selvarasu.g@samsung.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260417063314.2359-1-selvarasu.g@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When platform_get_drvdata() returns NULL and probe defers, the error
path jumps to the 'depopulate' label, skipping put_device() for the
reference acquired by of_find_device_by_node(). This extra reference
prevents the child platform device from being freed when
of_platform_depopulate() is called, resulting in memory leaks reported
by kmemleak:
unreferenced object 0xffff0000c92c1480 (size 64):
comm "kworker/u16:2", pid 50, jiffies 4294895789
backtrace (crc 49d507d0):
kmemleak_alloc+0x34/0x40
__kmalloc_noprof+0x430/0x670
of_device_alloc+0xec/0x26c
of_platform_device_create_pdata+0x60/0x1f0
of_platform_bus_create+0x290/0x610
of_platform_populate+0x74/0x118
dwc3_imx8mp_probe+0x228/0x734
Fixes: 86767625f5 ("usb: dwc3: imx8mp: disable auto suspend for host role")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260401134938.686748-1-xiaolei.wang@windriver.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some SpacemiT K1 boards (like OrangePi R2S) provide USB VBUS
through a controllable regulator. Add support for the optional
vbus-supply property so the regulator can be properly managed
in host mode instead of left always-on. Note that this doesn't
apply to USB Hub downstream ports with different VBUS supplies.
The enabled and disabled actions of the regulator are handled
automatically by devm_regulator_get_enable_optional().
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
Link: https://patch.msgid.link/20260326100010.3588454-2-amadeus@jmu.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a runtime suspend is executed followed by a system suspend, the driver
may invoke dwc3_imx_suspend() twice, which causes enable_irq() to be
called twice as well. This leads to an unbalanced IRQ state and may
trigger warnings or malfunction. Prevent this by checking the pm_suspended
flag before running the imx suspend/resume path.
Fixes: 76fc9452a6 ("usb: dwc3: introduce flatten model driver of i.MX Soc")
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260317030546.1665206-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The platform_get_irq_byname_optional() function returns a non-zero
IRQ number on success and a negative error code on failure. It
never returns zero.
The current implementation in the modern dwc3-qcom driver checks for
a return value less than or equal to zero. Since zero is not a
valid return value, simplify the check to only look for negative
error codes. This aligns the logic with the standard return contract
of the platform IRQ APIs.
Signed-off-by: Zeeshan Ahmad <zeeshanahmad022019@gmail.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260225065157.8952-1-zeeshanahmad022019@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The i.MX USB glue and DWC3 core are closely coupled. Describe the i.MX
USB block in a single block will bring more benefits than a parent-
child relation. To support the flatten model devicetree, DWC3 USB core
driver already support to directly register and initialize the core in
glue layer using one device. And many notification can be received in
glue layer timely and proper actions can be executed accordingly.
To align with mainstream, introduce a new driver to support flatten dwc3
devicetree model for i.MX Soc. Besides this driver disables wakeup irq
when system is active, no other function change in this version compared
to dwc3-imx8mp.c. After this new driver is settled, only maintenance
fixes will be added to dwc3-imx8mp.c, new features will only be added
to this new driver. Once all users switch to this new one, the legacy
driver will be removed at proper time.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260212-add-flatten-dts-based-dwc3-imx-driver-v5-3-ff04a75ce221@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current design assumes that the controller remains powered when wakeup
is enabled. However, some SoCs provide wakeup capability even when the
controller itself is powered down, using separate dedicated wakeup logic.
This allows additional power savings, but requires the controller to be
fully re‑initialized after system resume.
To support these SoCs, introduce a flag needs_full_reinit for the purpose.
And the glue layer needs to indicate if the controller needs this behavior
by setting a same flag needs_full_reinit in dwc3_properties.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260212-add-flatten-dts-based-dwc3-imx-driver-v5-2-ff04a75ce221@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
When multiple DWC3 controllers are being used, trace events from
different instances get mixed up making debugging difficult as
there's no way to distinguish which instance generated the trace.
Use the register base address of dwc3 controller and append it to
trace events, so that the source instance is clearly identifiable.
Example trace output,
before -> dwc3_event: event (00000101): Reset [U0]
after -> dwc3_event: 0x000000000a600000: event (00000101): Reset [U0]
Signed-off-by: Prashanth K <prashanth.k@oss.qualcomm.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260122105000.4126769-1-prashanth.k@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ignore USB role switches if dwc3-apple is already in the desired state.
The USB-C port controller on M2 and M1/M2 Pro/Max/Ultra devices issues
additional interrupts which result in USB role switches to the already
active role.
Ignore these USB role switches to ensure the USB-C port controller and
dwc3-apple are always in a consistent state. This matches the behaviour
in __dwc3_set_mode() in core.c.
Fixes detecting USB 2.0 and 3.x devices on the affected systems. The
reset caused by the additional role switch appears to leave the USB
devices in a state which prevents detection when the phy and dwc3 is
brought back up again.
Fixes: 0ec946d32e ("usb: dwc3: Add Apple Silicon DWC3 glue layer driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Janne Grunau <j@jannau.net>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Reviewed-by: Sven Peter <sven@kernel.org>
Tested-by: Sven Peter <sven@kernel.org> # M1 mac mini and macbook air
Link: https://patch.msgid.link/20260109-apple-dwc3-role-switch-v1-1-11623b0f6222@jannau.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the upstream code has been getting broader test coverage by our
users we occasionally see issues with USB2 devices plugged in during boot.
Before Linux is running, the USB2 PHY has usually been running in device
mode and it turns out that sometimes host->device or device->host
transitions don't work.
The root cause: If the role inside the USB2 PHY is re-configured when it
has already been powered on or when dwc3 has already enabled the ULPI
interface the new configuration sometimes doesn't take affect until dwc3
is reset again. Fix this rare issue by configuring the role much earlier.
Note that the USB3 PHY does not suffer from this issue and actually
requires dwc3 to be up before the correct role can be configured there.
Reported-by: James Calligeros <jcalligeros99@gmail.com>
Reported-by: Janne Grunau <j@jannau.net>
Fixes: 0ec946d32e ("usb: dwc3: Add Apple Silicon DWC3 glue layer driver")
Cc: stable <stable@kernel.org>
Tested-by: Janne Grunau <j@jannau.net>
Reviewed-by: Janne Grunau <j@jannau.net>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://patch.msgid.link/20260109-dwc3-apple-usb2phy-fix-v2-1-ab6b041e3b26@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Do dwc3 core auto suspend enable for device and disable for host
, this can make sure dwc3 core device auto suspend setting is
correct all the time, the background of disable dwc3 core device
auto suspend is to make its parent device suspend immediately
(so wakeup enable can be enabled) after xhci-plat device suspended,
for device mode, we keep the dwc3 core device auto suspend is to
give some wait for gadget to be enumerated.
Note: It's a temporary solution until we switch to using the new
flatten model.
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20260108081433.2119328-3-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for the DWC3 USB controller found on Google Tensor G5
(codename: laguna). The controller features dual-role functionality
and hibernation.
The primary focus is implementing hibernation support in host mode,
enabling the controller to enter a low-power state (D3). This is
particularly relevant during system power state transition and
runtime power management for power efficiency.
Highlights:
- Align suspend callback with dwc3_suspend_common() for deciding
between a full teardown and hibernation in host mode.
- Integration with `psw` (power switchable) and `top` power domains,
managing their states and device links to support hibernation.
- A notifier callback dwc3_google_usb_psw_pd_notifier() for
`psw` power domain events to manage controller state
transitions to/from D3.
- Coordination of the `non_sticky` reset during power state
transitions, asserting it on D3 entry and deasserting on D0 entry
in hibernation scenario.
- Handling of high-speed and super-speed PME interrupts
that are generated by remote wakeup during hibernation.
Co-developed-by: Joy Chakraborty <joychakr@google.com>
Signed-off-by: Joy Chakraborty <joychakr@google.com>
Co-developed-by: Naveen Kumar <mnkumar@google.com>
Signed-off-by: Naveen Kumar <mnkumar@google.com>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Roy Luo <royluo@google.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20251218-controller-v10-2-4047c9077274@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull USB/Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for
6.19-rc1. Nothing major here, just lots of tiny updates for most of
the common USB drivers. Included in here are:
- more xhci driver updates and fixes
- Thunderbolt driver cleanups
- usb serial driver updates
- typec driver updates
- USB tracepoint additions
- dwc3 driver updates, including support for Apple hardware
- lots of other smaller driver updates and cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (161 commits)
usb: gadget: tegra-xudc: Always reinitialize data toggle when clear halt
USB: serial: option: move Telit 0x10c7 composition in the right place
USB: serial: option: add Telit Cinterion FE910C04 new compositions
usb: typec: ucsi: fix use-after-free caused by uec->work
usb: typec: ucsi: fix probe failure in gaokun_ucsi_probe()
usb: dwc3: core: Remove redundant comment in core init
usb: phy: Initialize struct usb_phy list_head
USB: serial: option: add Foxconn T99W760
usb: usb-storage: No additional quirks need to be added to the EL-R12 optical drive.
usb: typec: hd3ss3220: Enable VBUS based on ID pin state
dt-bindings: usb: ti,hd3ss3220: Add support for VBUS based on ID state
usb: typec: anx7411: add WQ_PERCPU to alloc_workqueue users
USB: add WQ_PERCPU to alloc_workqueue users
dt-bindings: usb: dwc3-xilinx: Describe the reset constraint for the versal platform
drivers/usb/storage: use min() instead of min_t()
usb: raw-gadget: cap raw_io transfer length to KMALLOC_MAX_SIZE
usb: ohci-da8xx: remove unused platform data
usb: gadget: functionfs: use dma_buf_unmap_attachment_unlocked() helper
usb: uas: reduce time under spinlock
usb: dwc3: eic7700: Add EIC7700 USB driver
...
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Allow power-off for out-of-band wakeup-capable devices
- Drop the redundant call to dev_pm_domain_detach() for the amba bus
- Extend the genpd governor for CPUs to account for IPIs
pmdomain providers:
- bcm: Add support for BCM2712
- mediatek: Add support for MFlexGraphics power domains
- mediatek: Add support for MT8196 power domains
- qcom: Add RPMh power domain support for Kaanapali
- rockchip: Add support for RV1126B
pmdomain consumers:
- usb: dwc3: Enable out of band wakeup for i.MX95
- usb: chipidea: Enable out of band wakeup for i.MX95"
* tag 'pmdomain-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (26 commits)
pmdomain: Extend the genpd governor for CPUs to account for IPIs
smp: Introduce a helper function to check for pending IPIs
pmdomain: mediatek: convert from clk round_rate() to determine_rate()
amba: bus: Drop dev_pm_domain_detach() call
pmdomain: bcm: bcm2835-power: Prepare to support BCM2712
pmdomain: mediatek: mtk-mfg: select MAILBOX in Kconfig
pmdomain: mediatek: Add support for MFlexGraphics
pmdomain: mediatek: Fix build-errors
cpuidle: psci: Replace deprecated strcpy in psci_idle_init_cpu
pmdomain: rockchip: Add support for RV1126B
pmdomain: mediatek: Add support for MT8196 HFRPSYS power domains
pmdomain: mediatek: Add support for MT8196 SCPSYS power domains
pmdomain: mediatek: Add support for secure HWCCF infra power on
pmdomain: mediatek: Add support for Hardware Voter power domains
pmdomain: qcom: rpmhpd: Add RPMh power domain support for Kaanapali
usb: dwc3: imx8mp: Set out of band wakeup for i.MX95
usb: chipidea: ci_hdrc_imx: Set out of band wakeup for i.MX95
usb: chipidea: core: detach power domain for ci_hdrc platform device
pmdomain: core: Allow power-off for out-of-band wakeup-capable devices
PM: wakeup: Add out-of-band system wakeup support for devices
...
This patch addresses a race condition caused by unsynchronized
execution of multiple call paths invoking `dwc3_remove_requests()`,
leading to premature freeing of USB requests and subsequent crashes.
Three distinct execution paths interact with `dwc3_remove_requests()`:
Path 1:
Triggered via `dwc3_gadget_reset_interrupt()` during USB reset
handling. The call stack includes:
- `dwc3_ep0_reset_state()`
- `dwc3_ep0_stall_and_restart()`
- `dwc3_ep0_out_start()`
- `dwc3_remove_requests()`
- `dwc3_gadget_del_and_unmap_request()`
Path 2:
Also initiated from `dwc3_gadget_reset_interrupt()`, but through
`dwc3_stop_active_transfers()`. The call stack includes:
- `dwc3_stop_active_transfers()`
- `dwc3_remove_requests()`
- `dwc3_gadget_del_and_unmap_request()`
Path 3:
Occurs independently during `adb root` execution, which triggers
USB function unbind and bind operations. The sequence includes:
- `gserial_disconnect()`
- `usb_ep_disable()`
- `dwc3_gadget_ep_disable()`
- `dwc3_remove_requests()` with `-ESHUTDOWN` status
Path 3 operates asynchronously and lacks synchronization with Paths
1 and 2. When Path 3 completes, it disables endpoints and frees 'out'
requests. If Paths 1 or 2 are still processing these requests,
accessing freed memory leads to a crash due to use-after-free conditions.
To fix this added check for request completion and skip processing
if already completed and added the request status for ep0 while queue.
Fixes: 72246da40f ("usb: Introduce DesignWare USB3 DRD Driver")
Cc: stable <stable@kernel.org>
Suggested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Manish Nagar <manish.nagar@oss.qualcomm.com>
Link: https://patch.msgid.link/20251120074435.1983091-1-manish.nagar@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The EIC7700 instantiates two USB 3.0 DWC3 IPs, each of which is backward
compatible with USB interfaces. It supports Super-speed (5Gb/s), DRD mode,
and compatible with xHCI 1.1, etc. Each of instances supports 16 endpoints
in device's mode and max 64 devices in host's mode.
This module needs to interact with the NOC via the AXI master bus, thus
requiring some HSP configuration operations to achieve this. Ops include
bus filter, pm signal or status to usb bus and so on.
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Senchuan Zhang <zhangsenchuan@eswincomputing.com>
Signed-off-by: Hang Cao <caohang@eswincomputing.com>
Link: https://patch.msgid.link/20251112055346.1655-1-caohang@eswincomputing.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Runyu Xiao
Ben Dooks
WenTao Liang
Greg Kroah-Hartman
Hans Zhang
Shuping Bu
Radhey Shyam Pandey
Selvarasu Ganesan
Minda Chen
Xiaolei Wang
Chukun Pan
Yixun Lan
Xu Yang
Felix Gu
Heikki Krogerus
Zeeshan Ahmad
Ingo Rohloff
Linus Torvalds
Kees Cook
Prashanth K
Chen Ni
Janne Grunau
Sven Peter
Sean Anderson
Thinh Nguyen
Roy Luo
Miaoqian Lin
Udipto Goswami
Krishna Kurapati
Manish Nagar
Hang Cao