Pull SoC fixes from Arnd Bergmann:
"There are only three devicetree fixes this time: one critical memory
corruption fix for Renesas and three minor corrections for Tegra.
The MAINTAINERS file is updated for a new maintainer of the CIX
platform and two address changes.
The rest is all driver fixes, mostly firmware:
- multiple runtime issues in ARM SCMI and FF-A firmware code, dealing
with error handling for corner cases in firmware.
- multiple fixes for reset drivers, dealing with individual platform
specific mistakes and more error handling
- minor build and runtime fixes for the Tegra SoC drivers"
* tag 'soc-fixes-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: renesas: ironhide: Describe inline ECC carveouts
MAINTAINERS: Update maintainer and git tree for CIX SoC
ARM: Don't let ARMv5 platforms select USE_OF
MAINTAINERS: Update SpacemiT SoC git tree repository
firmware: arm_scmi: Rate-limit queue-full warnings in IRQ context
firmware: arm_scmi: Use 64-bit division for clock rate rounding
reset: imx7: Correct polarity of MIPI CSI resets on i.MX8MQ
reset: sunxi: fix memory region leak on ioremap failure
dt-bindings: reset: altr: add COMBOPHY_RESET for Agilex5
reset: spacemit: k3: fix USB2 ahb reset
firmware: arm_scmi: Grammar s/may needed/may be needed/
firmware: arm_ffa: Fix NULL dereference in ffa_partition_info_get()
firmware: arm_ffa: Respect firmware advertised RX/TX buffer size limits
arm64: tegra: Fix CPU1 node unit-address on Tegra264
arm64: tegra: Fix CPU compatible string to cortex-a78ae on Tegra234
MAINTAINERS: .mailmap: update Jens Wiklander's email address
soc/tegra: fuse: Fix spurious straps warning on SMCCC platforms
soc/tegra: pmc: fix #ifdef block in header
drm/tegra: Fix a strange error handling path
arm64: tegra: Remove fallback compatible for GPCDMA
Add COMBOPHY_RESET definition at index 38 for the combo PHY reset
control on Altera Agilex5 SoCs. This reset is used by peripherals
such as the SD/eMMC controller that share the combo PHY.
Signed-off-by: Tanmay Kathpalia <tanmay.kathpalia@altera.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Pull clk updates from Stephen Boyd:
"This is all clk driver updates. Mostly new SoC support for various
Qualcomm chips and Canaan K230. Otherwise there's non-critical fixes
and updates to clk data such as adding missing clks to existing
drivers or marking clks critical. Nothing looks especially exciting"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (106 commits)
clk: qcom: regmap-phy-mux: Rework the implementation
clk: qcom: a53: Corrected frequency multiplier for 1152MHz
clk: qcom: camcc-milos: Declare icc path dependency for CAMSS_TOP_GDSC
clk: qcom: gdsc: Support enabling interconnect path for power domain
dt-bindings: clock: qcom,milos-camcc: Document interconnect path
interconnect: Add devm_of_icc_get_by_index() as exported API for users
clk: qcom: camcc-x1p42100: Add support for camera clock controller
clk: qcom: camcc-x1e80100: Add support for camera QDSS debug clocks
clk: qcom: videocc-x1p42100: Add support for video clock controller
dt-bindings: clock: qcom: Add X1P42100 camera clock controller
dt-bindings: clock: qcom: Add X1P42100 video clock controller
clk: keystone: sci-clk: fix application of sizeof to pointer
clk: keystone: don't cache clock rate
clk: spacemit: k3: Add PCIe DBI clock
dt-bindings: soc: spacemit: k3: Add PCIe DBI clock IDs
clk: spacemit: k3: Fix PCIe clock register offset
clk: spacemit: k3: Switch to pll2_d6 as parent for PCIe clock
clk: at91: keep securam node alive while mapping it
clk: samsung: exynos990: Fix PERIC0/1 USI clock types
clk: renesas: r9a08g045: Drop unused pm_domain header file
...
Pull misc driver updates from Greg KH:
"Here is the big set of char, misc, iio, fpga, and other small driver
subsystems changes for 7.2-rc1.
Lots of little stuff in here, the majority being of course the IIO
driver updates, as a list they are:
- IIO driver updates and additions
- GPIB driver bugfixes and cleanups
- Android binder driver updates (rust and C version)
- counter driver updates
- MHI driver updates
- mei driver updates
- w1 driver updates
- interconnect driver updates
- Comedi driver fixes and updates
- some obsolete char drivers removed (applicom and dtlk)
- hwtracing driver updates
- other tiny driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (406 commits)
w1: ds2482: Use named initializers for arrays of i2c_device_data
firmware: stratix10-svc: Add support to query Arm Trusted Firmware (ATF) version
firmware: stratix10-rsu: avoid blocking reboot_image sysfs when busy
coresight: ultrasoc-smb: Fix OOB write in smb_sync_perf_buffer()
iio: adc: nxp-sar-adc: harden buffer ISR against per-channel read failure
iio: chemical: scd30: Replace manual locking with RAII locking
iio: light: tsl2591: remove unneeded tsl2591_compatible_als_persist_cycle()
iio: dac: ad5686: create bus ops struct
iio: dac: ad5686: cleanup doc header of local structs
iio: dac: ad5686: add control_sync() for single-channel devices
iio: dac: ad5686: add helpers to handle powerdown masks
iio: dac: ad5686: add of_match table to the spi driver
iio: dac: ad5686: drop enum id
iio: dac: ad5686: remove redundant register definition
iio: dac: ad5686: refactor include headers
iio: adc: ad4080: fix AD4880 chip ID
iio: light: veml3328: add support for new device
dt-bindings: iio: light: veml6030: add veml3328
fpga: microchip-spi: fix zero header_size OOB read in mpf_ops_parse_header()
fpga: dfl-afu: validate DMA mapping length in afu_dma_map_region()
...
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Add OF helpers for parsing the power-domains-child-ids property
- Extend the power domain DT binding with power-domains-child-ids
- Switch to use the dynamic root device
pmdomain providers:
- arm: Add support for domain hierarchies to SCMI power domains
- qcom: Add power domains for the Shikra and Nord SoCs
- sunxi: Fix GPU support on Radxa Cubie A7Z by keeping power domain on"
* tag 'pmdomain-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: core: fix unused variable warning with !PM_GENERIC_DOMAINS_OF
pmdomain: core: fix early domain registration
pmdomain: mediatek: mfg: move __packed after struct name to fix kernel-doc
pmdomain: qcom: rpmpd: Add Shikra RPM Power Domains
pmdomain: qcom: rpmhpd: Add power domains for Nord SoC
dt-bindings: power: qcom,rpmpd: document the Shikra RPM Power Domains
pmdomain: sunxi: support power domain flags for pck600
pmdomain: core: switch to dynamic root device
pmdomain: qcom: Unify user-visible "Qualcomm" name
dt-bindings: power: qcom,rpmhpd: Add RPMh power domain for Nord SoC
dt-bindings: power: qcom,rpmhpd: Fix whitespace in RPMHPD defines
pmdomain: arm_scmi: add support for domain hierarchies
pmdomain: core: add support for power-domains-child-ids
dt-bindings: power: Add power-domains-child-ids property
Pull pin control updates from Linus Walleij:
"Core changes:
- Add new generic callbacks to populate per-pin pin controllers
creating groups and functions from the device tree building out
pinctrl_generic_to_map() and move the Spacemit driver over to use
this
- Generic board-level pin control driver using the mux framework
New pin controller drivers:
- Amlogic (meson) A9 SoC
- Aspeed AST2700 SoC0 and SoC1
- nVidia Tegra264 and Tegra238
- Qualcomm Nord TLMM, Shikra TLMM, SM6350 LPASS LPI, and IPQ9650 TLMM
- Renesas RZ/G3L SoC
- UltraRISC DP1000
Improvements:
- Handle pull up/pull down properly in the Renesas RZG2L driver
- Fix up nVidia Tegra 234 DT bindings
- Fix up pin definitions in the Qualcomm Eliza driver
- Qualcomm PM8010 GPIO support in the PM8010
- Qualcomm SM6115 EGPIO support in the SM6115
- Switch Qualcomm LPASS LPI drivers to use runtime PM for power
management
- Clean up the Qualcomm Kconfig business a bit to include the
necessary drivers for each subarch
- Fix output glitch in the Amlogic (meson) A4 pin controller
- Move the Airoha driver from the Mediatek directory to its own
directory. It is too different from other Mediatek hardware
- A slew of fixes to the Airoha AN7581 and AN7583 drivers"
* tag 'pinctrl-v7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (151 commits)
pinctrl: Export pinctrl_get_group_selector()
pinctrl: Match DT helper types
pinctrl: qcom: Register functions before enabling pinctrl
pinctrl: meson: amlogic-a4: use nolock get range
pinctrl: ultrarisc: Add UltraRISC DP1000 pinctrl driver
dt-bindings: pinctrl: Add UltraRISC DP1000 pinctrl controller
pinctrl: qcom: Remove unused macro definitions
pinctrl: tegra: PINCTRL_TEGRA264 should depend on ARCH_TEGRA
pinctrl: tegra: PINCTRL_TEGRA238 should depend on ARCH_TEGRA
pinctrl: tegra238: add missing AON pin groups
dt-bindings: pinctrl: tegra238: add missing AON pin groups
pinctrl: airoha: an7583: remove undefined groups from pcm_spi pin function
pinctrl: airoha: an7583: fix phy1_led1 pin function
pinctrl: airoha: an7583: add missed gpio22 pin group
pinctrl: airoha: an7583: fix gpio21 pin group
pinctrl: airoha: fix pwm pin function for an7581 and an7583
pinctrl: airoha: an7583: fix incorrect led mapping in phy4_led1 pin function
pinctrl: airoha: an7581: fix incorrect led mapping in phy4_led1 pin function
pinctrl: airoha: an7583: fix misprint in gpio19 pinconf
pinctrl: airoha: an7581: fix misprint in gpio19 pinconf
...
Pull LED updates from Lee Jones:
"New Support & Features:
- Samsung S2MU005: Add support for the Samsung S2MU005 PMIC which
includes flash and RGB LED controllers
- Texas Instruments:
- LP5812: Add support for the TI LP5812 LED driver
- LP5860: Add support for the Texas Instruments LP5860 LED matrix
driver via SPI
Improvements & Fixes:
- Core:
- Adjust the brightness sysfs node documentation to clarify that
only decimal values are accepted
- Fix a race condition in the software blink logic when stopping
blinking and setting brightness simultaneously
- Introduce the `multi_max_intensity` sysfs attribute for
multicolor LEDs to support hardware-based global brightness
control
- Replace OF-based device lookup with firmware node equivalents
to support ACPI and software nodes
- Return `ENODATA` when reading brightness from
hardware-controlled LEDs
- Set the coherent DMA mask to zero for the Samsung PMIC device
to suppress unnecessary "DMA mask not set" messages
- ams OSRAM AS3668: Fix a Kconfig symbol name mismatch in the
Makefile that prevented the driver from being built
- BlinkM: Fix spelling and comment style issues in the driver
- DAC124S085: Declare the SPI command word as `__le16` to ensure
correct endianness and pass sparse checks
- GPIO Trigger: Use `GPIOD_FLAGS_BIT_NONEXCLUSIVE` to allow sharing
GPIOs between the LED trigger and other drivers
- NXP PCA9532: Fix an issue where the LED would stop blinking when
changing brightness to a non-zero value
- Qualcomm: Unify the user-visible company name to "Qualcomm" across
flash LED config options
- Qualcomm LPG: Optimize memory allocation by combining main
structure and channels into a single allocation using flexible
array members
- Texas Instruments
- LP5860: Add missing `CONFIG_OF` dependency to prevent build
warnings
- TPS6131x: Increase the overvoltage protection threshold to 6V
to avoid false triggers with 5V input supplies
- Userspace LEDs (uLEDs):
- Fix a potential buffer overread by using `strnchr()` for name
string validation
- Return `-EFAULT` on `copy_to_user()` failure to properly handle
read errors
Cleanups & Refactoring:
- Core:
- Convert various `i2c_device_id` arrays to use named
initializers for improved robustness and readability
- Multi-color: Fix incorrect `KernelVersion` and `Date` tags for
the `multi_max_intensity` ABI
- Broadcom BCM63138 / ChromeOS EC: Move `MODULE_DEVICE_TABLE`
declarations next to the ID tables for consistency
- LP5812: Fix a sysfs ABI reference in the documentation
- ST1202: Remove an unused legacy GPIO header include
Device Tree Binding Updates:
- Class: Document the keyboard backlight LED class naming
conventions, including a new scheme for zoned backlights
- Core: Dual-license the common LED bindings header under GPLv2
and BSD-2-Clause
- IR SPI LED: Add a new 30% duty-cycle value for the IR transmitter
used in Xiaomi Redmi Note 8
- Samsung S2M series:
- Document the flash LED device bindings for Samsung S2M series
PMICs
- Document the pattern behavior for Samsung S2M series PMIC RGB
- S2MU005: Add device tree bindings for the S2MU005 PMIC,
including its flash and RGB LED sub-devices
- TI LM3560: Document the TI LM3559 and LM3560 synchronous boost
flash drivers"
* tag 'leds-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (30 commits)
leds: tps6131x: Increase overvoltage protection threshold to 6V
leds: Fix sysfs ABI date
leds: Fix CONFIG_OF dependency for LEDS_LP5860_CORE
leds: uleds: Fix potential buffer overread
leds: Use named initializers for arrays of i2c_device_data
leds: uleds: Return -EFAULT on copy_to_user() failure
leds: core: Report ENODATA for brightness of hardware controlled LED
leds: class: Use firmware nodes for device lookup
Documentation: leds: Document pattern behavior of Samsung S2M series PMIC RGB LEDs
leds: rgb: Add support for Samsung S2M series PMIC RGB LED device
leds: flash: Add support for Samsung S2M series PMIC flash LED device
dt-bindings: leds: Document Samsung S2M series PMIC flash LED device
leds: core: Fix race condition for software blink
leds: Adjust documentation of brightness sysfs node
leds: dac124s085: Declare SPI command word as __le16
leds: Introduce the multi_max_intensity sysfs attribute
dt-bindings: leds: Document TI LM3560 Synchronous Boost Flash Driver
leds: bcm63138/cros_ec: Move MODULE_DEVICE_TABLE next to the table itself
leds: Add support for TI LP5860 LED driver chip
Documentation: leds: leds-class: Document keyboard backlight LED class naming
...
Pull SoC driver updates from Arnd Bergmann:
"There are a few added drivers, but mostly the normal maintenance to
drivers for firmware, memory controller and other soc specific
hardware:
- The NXP QuickEngine gets modern MSI support, which allows some
cleanups to the GICv3 irqchip chip driver
- A new SoC specific driver for the Renesas R-Car MFIS unit is added,
encapsulating support for the on-chip mailbox and hwspinlock
implementations that are not easily separated into individual
drivers
- The Qualcomm SoC drivers add support for additional SoC
implementations, and flexibility around power management for the
serial-engine driver as well as probing the LLCC driver using
custom hardware descriptions inside of the device itself.
- Added support for the Samsung thermal management unit
- A cleanup to the Tegra 'PMC' driver interfaces to remove legacy
APIs and allow multiple PMC instances everywhere.
- Updates to the TI SCI and KNAS drivers to improve suspend/resume
support.
- Minor driver changes for mediatek, xilinx, allwinner, aspeed,
tegra, broadcom, amd, microchip and starfive specific drivers
- Memory controller updates for Tegra and Renesas for additional SoC
types and other improvements.
- Firmware driver updates for Arm FF-A, SMCCC and SCMI interfaces, to
update driver probing, object lifetimes and address minor bugs"
* tag 'soc-drivers-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (189 commits)
Revert "firmware: zynqmp: Add dynamic CSU register discovery and sysfs interface"
Revert "Documentation: ABI: add sysfs interface for ZynqMP CSU registers"
memory: tegra234: drop dead NULL check in tegra234_mc_icc_aggregate()
memory: tegra264: drop redundant tegra264_mc_icc_aggregate()
memory: tegra186-emc: stop borrowing MC aggregate hook for EMC
soc: aspeed: cleanup dead default for ASPEED_SOCINFO
firmware: tegra: bpmp: Add support for multi-socket platforms
firmware: tegra: bpmp: Propagate debugfs errors
soc/tegra: pmc: Add Tegra238 support
soc/tegra: pmc: Restrict power-off handler to Nexus 7
soc/tegra: pmc: Populate powergate debugfs only when needed
soc/tegra: pmc: Move legacy code behind CONFIG_ARM guard
soc/tegra: pmc: Remove unused legacy functions
soc/tegra: pmc: Create PMC context dynamically
firmware: samsung: acpm: remove compile-testing stubs
firmware: samsung: acpm: Add devm_acpm_get_by_phandle helper
firmware: samsung: acpm: Add TMU protocol support
firmware: samsung: acpm: Make acpm_ops const and access via pointer
firmware: samsung: acpm: Drop redundant _ops suffix in acpm_ops members
firmware: samsung: acpm: Annotate rx_data->cmd with __counted_by_ptr
...
Pull SoC devicetree updates from Arnd Bergmann:
"There are fewer devicetree updates this time that the last few ones,
with five SoC types getting added:
- Qualcomm Dragonwing IPQ9650 is a new wireless networking SoC using
four Cortex-A55 and one Cortex-A78 core, which is a significant
upgrade from older generations
- ZTE zx297520v3 is an older low-end wireless SoC using a single
Cortex-A53 core, which so far can only run 32-bit kernels. This
brings back the ZX family of chips that was removed in 2021 after
support for the original zx296702 and zx296718 chips was never
completed.
- Renesas R-Car M3Le (R8A779MD) is a variant of the R-Car M3-N
(R8A77965) automotive SoC.
- Apple t8122 (M3) is the 2023 generation of their laptop SoCs, which
has now been reverse-engineered to the point of having initial
kernel support for five laptop models.
- ASPEED AST27xx is their first baseboard managment controller using
a 64-bit core, the Cortex-A35, following earlier generations using
ARMv5/v6/v7 CPUs.
These all come with one or more initial boards, and in total there are
39 new boards getting added across SoC families, including:
- Two NAS boxes using the old Cortina Systems Gemini SoC based on an
ARMv4 FA526 CPU core
- 18 industrial embedded boards using NXP i.MX6/8/9 and LX2160A SoCs
from Variscite, Toradex and SolidRun, plus a number of overlays for
combinations with additional boards
- One new carrier board and SoM using TI K3 AM62x, in addition to new
overlays for older SoMs
- Two new boards using Spacemit K3 (no relation with TI) RISC-V SoCs.
- Three phones from Google, Nothing and Motorola, all using Qualcomm
Snapdragon SoCs
- AST26xx BMC support for two server boards
While there is still a significant number of patches improving
hardware support for the existing boards across vendors (NXP,
Qualcomm, Renesas, Rockchips, Mediatek, ...), a much smaller number
of cleanups and warning fixes have made it in this time"
* tag 'soc-dt-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (665 commits)
arm64: dts: aspeed: Fix duplicate pinctrl labels and address scheme
arm64: dts: bst: enable eMMC controller in C1200
dt-bindings: display/lvds-codec: add ti,sn65lvds93
arm64: dts: allwinner: a523: Add missing GPIO interrupt
arm64: dts: lx2160a-rev2: avoid 32-bit pcie window system ram overlap
arm64: dts: aspeed: Add initial AST27xx SoC device tree
arm64: Kconfig: Add ASPEED SoC family Kconfig support
dt-bindings: arm: aspeed: Add AST2700 board compatible
arm64: dts: allwinner: a523: add gpadc node
arm64: dts: allwinner: Add EL2 virtual timer interrupt
ARM: dts: sun8i: a83t: Add MIPI CSI-2 controller node
dt-bindings: media: sun6i-a31-isp: Add optional interconnect properties
dt-bindings: media: sun6i-a31-csi: Add optional interconnect properties
arm64: dts: imx{91,93}-phyboard-segin: Add peb-av-18 overlays
arm64: dts: imx93-var-som-symphony: enable ADC
arm64: dts: imx93-var-som-symphony: enable TPM3 PWM
arm64: dts: imx93-var-som-symphony: keep RGB_SEL low
arm64: dts: imx93-var-som-symphony: enable UART7
arm64: dts: imx93-var-som-symphony: add TPM support
arm64: dts: imx91-var-som-symphony: fix RGB_SEL handling
...
Memory controller drivers for v7.2
1. Tegra MC/EMC:
- Handle system sleep, necessary to re-program registers after system
resume. A few more improvements.
- Add Tegra114 and Tegra238 Memory Controller, and Tegra114 External
MC support.
- Grow Tegra264 support.
2. Renesas XSPI: Document RZ/T2H and RZ/N2H variants, compatible with
existing devices.
* tag 'memory-controller-drv-7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: tegra264: Add full set of MC clients
dt-bindings: memory: tegra264: Add full set of MC client IDs
memory: tegra264: Skip clients without bpmp_id or type
memory: renesas-rpc-if: Fix duplicate device name on multi-instance platforms
dt-bindings: memory: renesas,rzg3e-xspi: Add RZ/T2H and RZ/N2H support
memory: omap-gpmc: Silence W=1 kerneldoc warnings
memory: tegra114-emc: Simplify tegra114_emc_interconnect_init() error message
memory: tegra114-emc: Do not print error on icc_node_create() failure
memory: tegra: Fix possible null pointer dereference
memory: tegra: Add Tegra114 EMC driver
memory: tegra: Implement EMEM regs and ICC ops for Tegra114
dt-bindings: memory: Document Tegra114 External Memory Controller
dt-bindings: memory: Document Tegra114 Memory Controller
memory: tegra: Add Tegra238 MC support
dt-bindings: memory: tegra: Add nvidia,tegra238-mc compatible
memory: tegra: Restore MC interrupt masks on resume
memory: tegra: Wire up system sleep PM ops
memory: tegra: Make ->resume() callback return void
memory: tegra: Deduplicate rate request management code
memory: atmel-ebi: Allow deferred probing
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ARM: tegra: Device tree changes for v7.2-rc1
The bulk of this is various improvements for some of the older ASUS and
LG devices, but there's also support for interconnects on Tegra114 to
help improve memory frequency scaling.
* tag 'tegra-for-7.2-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: tf600t: Invert accelerometer calibration matrix
ARM: tegra: tf600t: Drop backlight regulator
ARM: tegra: tf600t: Configure panel
ARM: tegra: transformers: Add connector node for common trees
ARM: tegra: transformer: Add support for front camera
ARM: tegra: grouper: Add support for front camera
ARM: tegra: p880: Lower CPU thermal limit
ARM: tegra: lg-x3: Set PMIC's RTC address
ARM: tegra: lg-x3: Complete video device graph
ARM: tegra: Configure Tegra114 power domains
ARM: tegra: Add DC interconnections for Tegra114
ARM: tegra: Add EMC OPP and ICC properties to Tegra114 EMC and ACTMON device-tree nodes
ARM: tegra: Add #{address,size}-cells to Chromium-based /firmware
dt-bindings: memory: Document Tegra114 External Memory Controller
dt-bindings: memory: Document Tegra114 Memory Controller
Signed-off-by: Linus Walleij <linusw@kernel.org>
Document the RPMh power domain for Nord SoC, and add definitions for
the new power domains present on Nord SoC.
- RPMHPD_NSP3: power domain for the 4th NSP subsystem
- RPMHPD_GFX1: power domain for the 2nd GFX subsystem
Signed-off-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Some RPMHPD_* defines in the Generic RPMH Power Domain Indexes section
were using spaces instead of tabs for alignment. Fix them to be
consistent with the rest of the file.
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Qualcomm Arm64 DeviceTree updates for v7.2
Introduce the Qualcomm IPQ9650 router/gateway platform and the RDP488
board. Add support for the Motorola Edge 30 and the Nothing Phone.
Describe the IPA block on the Agatti platform and missing OPP-levels for
the video encoder/decoder.
For Eliza, describe the QUP Serial Engines, GPI DMA, SDHCI, LLCC, IMEM,
QCE crypto, ADSP remoteproc and USB nodes. Enable DSI panel,
DisplayPort, USB, and ADSP support on the Eliza MTP.
On Glymur enable ADSP and CDSP remoteprocs, FastRPC, crypto hardware,
CPUfreq cooling devices, and coresight nodes. Enable the remoteprocs and
the LID sensor on the Glymur CRD.
Describe the CAN-FD controller found on the Hamoa EVK. Correct the
DisplayPort controller OPP tables.
Describe the watchdog on IPQ5210 and IPQ9650.
Describe USB controller and PHYs for the Kaanapali platform and enable
basic USB support on the MTP and QRD devices.
Enable the second display subsystem on Lemans and use this to enable
additional DisplayPort outputs on the Lemans Ride board, and IFP
mezzanine for the EVK. Also enable the GPIO expander on the Lemans EVK
to get the CAN signals out.
Add crypto hardware and qfprom nodes on Milos. Reduce the remotefs
shared memory size to avoid sanity checks in the modem firmware
rejecting the region.
Enable the vibrator on FairPhone FP6.
Add GPSDP FastRPC support on Monaco, and describe the Bluetooth
controller on the Arduino VENTUNO Q board.
Introduce an EL2 overlay for the Purwa IoT EVK.
Enable CAN bus controller on QCS6490 RB3gen2 and add a remotefs node.
Enable FastRPC on the SC8280XP ADSP.
Correct SDM630 and SDM660 ADSP FastRPC channel ids. Also add the ADSP
memory region on SDM630.
On SDM845 devices, enable NFC on Google Pixel 3, OnePlus 6, OnePlus 6T,
and SHIFT SHIFT6mq. Enable camera flash on LG devices. Rework the
framebuffer description on Samsung, SHIFT and Xiaomi devices. Enable
camera flash on LG devices. Fix Bluetooth and WiFi on LG and Xiaomi
devices.
Enable MDSS and the display panel on Xiaomi Mi A3.
Scale L3 and DDR clock votes based on CPUfreq selection.
Enable camera clock controller, cpufreq cooling devices, and correct the
DSI1 reference clock on SM8750.
On the Talos platform, describe the QSPI support, GPR and audio
services, and enable sound on the EVK target. Enable QSPI and describe
the SPINOR on this bus, on the QCS615 Ride.
Describe power-domain and iface clock for the Inline Crypto Engine (ICE)
across various platforms.
Fix the Bluetooth RFA supply name across a variety of devices.
* tag 'qcom-arm64-for-7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (131 commits)
arm64: dts: qcom: add support for pixel 3a xl with the tianma panel
arm64: dts: qcom: sdm670-google: add common device tree include
arm64: dts: qcom: hamoa-iot-evk: add MCP2518FD CAN on spi18
arm64: dts: qcom: sm8750: allow mode-switch events to reach the QMP Combo PHY
arm64: dts: qcom: sc8280xp: drop unused polling-delay-passive properties
arm64: dts: qcom: ipq5210: add watchdog node
arm64: dts: qcom: sdm845-xiaomi-beryllium: Correct IPA FW path
arm64: dts: qcom: monaco-arduino-monza: Add Bluetooth UART node
arm64: dts: qcom: glymur: Add qfprom efuse node
arm64: dts: qcom: milos: Add qfprom efuse node
arm64: dts: qcom: glymur: add coresight nodes
arm64: dts: qcom: qcs6490-rb3gen2: add rmtfs node
arm64: dts: qcom: lemans-evk: Enable CAN RX via I2C GPIO expander
arm64: dts: qcom: glymur: Fix wrong interrupt number for i2c19
arm64: dts: qcom: Drop unused remoteproc_adsp_glink label
arm64: dts: qcom: lemans: Add eDP ref clock for eDP PHYs
arm64: dts: qcom: sm8750: Add power-domain and iface clk for ice node
arm64: dts: qcom: sm8650: Add power-domain and iface clk for ice node
arm64: dts: qcom: sm8550: Add power-domain and iface clk for ice node
arm64: dts: qcom: sm8450: Add power-domain and iface clk for ice node
...
Signed-off-by: Linus Walleij <linusw@kernel.org>
Qualcomm driver updates for v7.2
Enable QSEECOM and with that access to UEFI variables on the Surface Pro
12in laptop.
Refactor the Geni Serial-Engine helper code to allow the serial engine
drivers (such as I2C) to operate on targets where power and performance
is controlled through an SCMI server instead of individual resources in
Linux.
Extend the LLCC driver to support reading its data from a System Cache
Table (SCT) in memory instead of being hard coded per platform in the
driver. Also add support for the Eliza platform.
Add support for the Hawi platform to pd-mapper.
Switch the SMEM driver to track partitions using xarray to handle the
ever growing number of hosts better.
Extend the socinfo driver with knowledge about the Nord, SM7750,
IPQ9650, and Shikra SoCs, as well as PMAU0102, PMC1020H, PMIV0102, and
PMIV0104 PMICs.
Define UBWC 3.1 and add a couple of convenient helpers in the UBWC
library for MDSS and Adreno.
Fix a memory leak in the WCNSS firmware download mechanism.
* tag 'qcom-drivers-for-7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (40 commits)
soc: qcom: geni-se: Introduce helper APIs for performance control
soc: qcom: geni-se: Introduce helper API for attaching power domains
soc: qcom: geni-se: Add resources activation/deactivation helpers
soc: qcom: geni-se: Handle core clk in geni_se_clks_off() and geni_se_clks_on()
soc: qcom: geni-se: Introduce helper API for resource initialization
soc: qcom: geni-se: Add geni_icc_set_bw_ab() function
soc: qcom: geni-se: Refactor geni_icc_get() and make qup-memory ICC path optional
soc: qcom: llcc-qcom: Fix NULL vs IS_ERR() bug in qcom_llcc_get_fw_config()
soc: qcom: llcc-qcom: Add support for Eliza
dt-bindings: cache: qcom,llcc: Document Eliza LLCC block
soc: qcom: ubwc: add helper controlling AMSBC enablement
soc: qcom: ubwc: define helper for MDSS and Adreno drivers
soc: qcom: ubwc: define UBWC 3.1
soc: qcom: socinfo: Add SoC ID for Nord SA8797P
dt-bindings: arm: qcom,ids: Add SoC ID for Nord SA8797P
soc: qcom: socinfo: Add SoC ID for SM7750
dt-bindings: arm: qcom,ids: Add SoC ID for SM7750
soc: qcom: socinfo: Add PMIC PMAU0102
soc: qcom: socinfo: Add PMIV0102 & PMIV0104 PMICs
firmware: qcom: scm: Allow QSEECOM on Surface Pro 12in
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
pinctrl: renesas: Updates for v7.2
- Save/restore more registers during suspend/resume on the RZ/G2L and
RZ/V2H SoC families,
- Add support for the RZ/G3L (R9A08G046) SoC,
- Add support for pinconf-groups in debugfs on EMMA Mobile,
SH/R-Mobile, R-Car, RZ/G1, and RZ/G2 SoCs,
- Miscellaneous fixes and improvements.
Signed-off-by: Linus Walleij <linusw@kernel.org>
Add the missing Eliza SDCC1 interconnect slave ID and provider node.
The Eliza interconnect binding and provider already describe SDCC2, but
the matching SDCC1 CNOC CFG slave was left out. Add the binding constant
and the provider node so consumers can describe SDCC1 bandwidth paths.
The provider change also adds qhs_sdc1 to qsm_cfg and bcm_cn0, and updates
the qsm_cfg link count and bcm_cn0 node count.
* icc-eliza
dt-bindings: interconnect: qcom,eliza-rpmh: Add SDCC1 slave
interconnect: qcom: eliza: Add SDCC1 slave node
Link: https://patch.msgid.link/20260514-eliza-interconnect-add-missing-sdcc1-slave-node-v2-0-13c03bc890cb@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
This adds RPMh-based interconnect support for the Qualcomm Nord SoC.
The Nord SoC features a rich Network-on-Chip topology comprising 19 NoCs
including aggregate NoCs, a high-speed configuration NoC (HSCNOC), a
multimedia NoC, four NSP data NoCs for AI/ML workloads, PCIe inbound and
outbound NoCs, a system NoC, and virtual clock/MC nodes. Bandwidth requests
are communicated to the RPMh hardware through Bus Clock Manager (BCM)
resources via the Resource State Coordinator (RSC).
* icc-nord
dt-bindings: interconnect: Document RPMh Network-On-Chip for Qualcomm Nord SoC
interconnect: qcom: Add interconnect provider driver for Nord SoC
Link: https://patch.msgid.link/20260510020607.1129773-1-shengchao.guo@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
This patch adds the Device Tree binding for the clock controller
on Canaan k230. The binding defines the clocks and the required
properties to configure them correctly.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Xukai Wang <kingxukai@zohomail.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Extend the existing Tegra186 GPIO controller device tree bindings with
support for the GPIO controllers found on Tegra238. Tegra238 has two
GPIO controllers: the main controller and always-on (AON) controller.
The number of pins is slightly different, but the programming model
remains the same.
Add a new header, include/dt-bindings/gpio/nvidia,tegra238-gpio.h,
that defines port IDs as well as the TEGRA238_MAIN_GPIO() helper,
both of which are used in conjunction to create a unique specifier
for each pin.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260514124835.108532-1-pshete@nvidia.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Document the ZT trace bus and ZTR trace clocks on R-Mobile APE6. These
clocks supply the coresight tracing modules, PTM, TPIU, ETB and
replicator. Without these clocks, coresight tracing can not be
operated. While this does change the ABI, it does so by extending the
existing clock-output-names, therefore if old software is used with new
DT, the coresight tracing parts will likely fail to probe, otherwise if
new software is used with an old DT, there is no impact.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260502185557.93061-2-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Renesas RZ/G3L DT Pin Control Binding Definitions
Pin Control DT bindings and binding definitions for the Renesas RZ/G3L
(R9A08G046) SoC, shared by driver and DT source files.
Linus Torvalds
Guoniu Zhou
Tanmay Kathpalia
Stephen Boyd
Corvin Köhne
Arnd Bergmann
Krzysztof Kozlowski
Jagadeesh Kona
Linus Walleij
Kamal Wadhwa
Shawn Guo
Yixun Lan
Geert Uytterhoeven
Sumit Gupta
Jun Yan
Bartosz Golaszewski
Georgi Djakov
Vivek Aknurwar
Xukai Wang
Deepti Jaggi
Alexander Koskovich
Prathamesh Shete
Marek Vasut
Abel Vesa
Bjorn Andersson
Luo Jie
Kathiravan Thirumoorthy
Luca Leonardo Scorcia
Biju Das