Add the necessary fields to the chandef data structure
to represent NPCA (the NPCA primary channel and NPCA
punctured/disabled subchannels bitmap), and the code
to check these for validity, compatibility, as well as
allowing it to be passed for AP mode for capable
devices.
Compatibility is assumed to only be the case when it's
actually identical, enabling later management of this
in channel contexts in mac80211 for multiple APs, but
requiring userspace to set up the identical chandef on
all AP interfaces that share a channel (and BSS color.)
Link: https://patch.msgid.link/20260428112708.46f3872aeb35.I85888dab88a6659ba52db4b3318979ca5bcfc0c8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For UHR, multi-link power-management capability lives there, and
so it's needed that hostapd knows what to advertise, and clients
should have it shown to userspace for information.
Repurpose the existing NL80211_ATTR_ASSOC_MLD_EXT_CAPA_OPS by
renaming it to NL80211_ATTR_EXT_MLD_CAPA_AND_OPS (with a define
for compatibility) and advertise the capabilities.
We can also later use the value, if needed, to set per-station
capabilities on STAs added to AP interfaces.
Link: https://patch.msgid.link/20260428110915.e808e70feed6.I378a7c017bfc1ebb072fa8d5d1db2ac9b45596c9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently there is no way to install an LTF key seed that can be
used in non-trigger-based (NTB) and trigger-based (TB) FTM ranging
to protect NDP frames. Without this, drivers cannot enable PHY-layer
security for peer measurement sessions, leaving ranging measurements
vulnerable to eavesdropping and manipulation.
Introduce NL80211_KEY_LTF_SEED attribute and the dedicated extended
feature flag NL80211_EXT_FEATURE_SET_KEY_LTF_SEED to allow drivers
to advertise and install LTF key seeds via nl80211. The key seed
must be configured beforehand to ensure the peer measurement session
is secure. The driver must advertise both NL80211_EXT_FEATURE_SECURE_LTF
and NL80211_EXT_FEATURE_SET_KEY_LTF_SEED for the key seed installation
to be permitted.
The LTF key seed is pairwise key material and must only be used with
pairwise key type. Reject attempts to use it with other key types.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-13-peddolla.reddy@oss.qualcomm.com
[fix policy coding style]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Proximity detection often does not require detailed ranging
measurements, yet userspace currently receives full FTM results for
every request, causing unnecessary data transfer, host wakeups, and
processing overhead.
Add an optional control to suppress ranging result reporting for
peer-to-peer PD requests. Introduce the
NL80211_PMSR_FTM_REQ_ATTR_PD_SUPPRESS_RESULTS flag; when set with a
PD request, the device may perform the measurements (e.g. when acting
as RSTA) but must not report the measurement results to userspace.
Validate that the flag is only accepted when request_type is set to
NL80211_PMSR_FTM_REQ_TYPE_PD, reject otherwise.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-12-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Devices may support different preamble and bandwidth configurations
for proximity detection (PD) ranging versus standard ranging. Add
separate pd_preambles and pd_bandwidths fields to
cfg80211_pmsr_capabilities to allow drivers to advertise PD-specific
capabilities.
Expose these over nl80211 using new attributes
NL80211_PMSR_FTM_CAPA_ATTR_PD_PREAMBLES and
NL80211_PMSR_FTM_CAPA_ATTR_PD_BANDWIDTHS, advertised only when
pd_support is set.
For PD requests, validate bandwidth and preamble against pd_bandwidths
and pd_preambles. For non-PD requests, validate against the existing
bandwidths and preambles fields.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-11-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Proximity detection applications need to receive measurement results
only when devices cross specific distance boundaries to avoid
unnecessary host wakeups and reduce power consumption.
Introduce configurable distance-based reporting thresholds that
drivers can use to implement selective result reporting. Add ingress
and egress distance parameters allowing applications to specify when
results should be reported as peers cross these boundaries.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-10-peddolla.reddy@oss.qualcomm.com
[remove mm units from variables]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Peer measurement capabilities currently advertise a single maximum
peer count regardless of device role. Some devices support different
peer limits when operating as initiator versus responder.
Add max_peers fields inside the ftm.ista and ftm.rsta sub-structs of
cfg80211_pmsr_capabilities to allow drivers to advertise per-role peer
limits. These limits are generic and not restricted to any specific
ranging type.
Expose these over nl80211 using new NL80211_PMSR_ATTR_MAX_PEER_ISTA_ROLE
and NL80211_PMSR_ATTR_MAX_PEER_RSTA_ROLE attributes inside the
ISTA_CAPS and RSTA_CAPS nested attributes respectively.
When a role limit is advertised, validate the number of peers in the
request separately for each role using the existing rsta flag in the
FTM request, and reject the request if the limit is exceeded.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-9-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Applications need negotiated session parameters to interpret
proximity ranging results and perform post-processing. Currently,
the FTM response lacks LTF repetition counts, time constraints,
spatial stream configuration, and availability window parameters.
Extend the FTM response structure to report these negotiated
parameters, enabling applications to track session configuration
and use them in post-processing to increase ranging precision.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-8-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Enable NTB continuous ranging with configurable timing and measurement
parameters as per the Wi-Fi Alliance specification "Proximity Ranging
(PR) Implementation Consideration Draft 1.9 Rev 1, section 5.3". Add
new FTM request attributes for min/max time between measurements,
nominal time (mandatory for NTB), AW duration, and total measurement
count.
Add NL80211_PMSR_PEER_ATTR_REQ_TYPE attribute using the new
nl80211_peer_measurement_ftm_req_type enum to allow userspace to
specify the ranging request type per peer:
- NL80211_PMSR_FTM_REQ_TYPE_INFRA: STA-to-AP or AP-to-STA ranging
(default if attribute is absent)
- NL80211_PMSR_FTM_REQ_TYPE_PD: peer-to-peer ranging
Validate the request type against the device TYPE_CAPS capabilities
advertised via NL80211_PMSR_FTM_CAPA_ATTR_TYPE_CAPS. Reject PD
requests if the device does not advertise PD support.
Reject PD requests that set trigger-based ranging, as TB ranging is
not compatible with peer-to-peer proximity detection.
Add ftms_per_burst limit of 4 for PD NTB ranging requests.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-7-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Introduce Proximity Detection (PD) capabilities in Peer Measurement
Service (PMSR) as defined in the Wi-Fi Alliance specification
"Proximity Ranging (PR) Implementation Consideration Draft 1.9 Rev 1
section 3.3". This enables devices to advertise peer to peer ranging
support.
Restructure FTM capabilities in cfg80211_pmsr_capabilities to replace
the single support_rsta flag with nested ista and rsta sub-structs,
each carrying per-mode flags for Non-Trigger Based (NTB), Trigger Based
(TB), and EDCA based ranging. This allows drivers to advertise detailed
role and protocol support for both initiator and responder roles.
Add support to pass additional ISTA and RSTA role capabilities to
userspace using new nested ISTA_CAPS and RSTA_CAPS attributes. The
legacy RSTA_SUPPORT flag is retained for backward compatibility.
Add NL80211_PMSR_FTM_CAPA_ATTR_TYPE_CAPS nested attribute using the
nl80211_peer_measurement_ftm_type_capa enum with two sub-flags:
NL80211_PMSR_FTM_TYPE_CAPA_ATTR_INFRA_SUPPORT for STA-to-AP or
AP-to-STA ranging, and NL80211_PMSR_FTM_TYPE_CAPA_ATTR_PD_SUPPORT
for peer-to-peer ranging.
Add CONCURRENT_ISTA_RSTA_SUPPORT as a FTM capability flag indicating
the device can simultaneously act as initiator and responder in a
multi-peer measurement request.
Extend FTM capabilities with antenna configuration fields
(max_no_of_tx_antennas, max_no_of_rx_antennas) for the PR Element
during PASN negotiation, and ranging interval limits
(min_allowed_ranging_interval_edca, min_allowed_ranging_interval_ntb)
to advertise device timing constraints for EDCA and NTB-based ranging.
Update the FTM request validation path in pmsr.c to check RSTA
requests against the per-mode rsta capabilities (NTB, TB, EDCA),
rejecting requests for modes the device does not support.
Co-developed-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Signed-off-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-6-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, the proximity detection (PD) interface type has no
start/stop commands defined, preventing user space from
controlling PD operations through the nl80211 interface.
Add NL80211_CMD_START_PD and NL80211_CMD_STOP_PD commands to
allow user space to start and stop a PD interface. Add the
corresponding start_pd and stop_pd operations to cfg80211_ops
and ieee80211_ops, along with nl80211 command handlers, rdev
wrappers, and tracing support. Validate that drivers advertising
PD interface support implement the required operations. Handle
PD interface teardown during device unregistration and when
the interface leaves the network.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-5-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a new wdev-only interface type NL80211_IFTYPE_PD to support
Proximity Detection (PD) operations such as PASN and peer measurement
operations. This interface type operates without a netdev, similar to
P2P_DEVICE and NAN interfaces.
Implement support across cfg80211 and mac80211 layers with PD-specific
checks gated by the NL80211_EXT_FEATURE_SECURE_RTT feature flag,
management frame registration and transmission capabilities, and proper
channel context handling where PD interfaces are excluded from bandwidth
calculations. Update mac80211 to recognize the new interface type in the
relevant paths for this management-only interface.
PD discovery can be performed on any available interface, such as
NL80211_IFTYPE_STATION.
If PD/PMSR uses the MAC address of an existing interface type, such as
NL80211_IFTYPE_STATION, then pairing and measurement shall use that
same interface. If PD/PMSR uses a different MAC address, such as a
random MAC address, then pairing and measurement can be performed on a
new NL80211_IFTYPE_PD interface created with that random MAC address.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-4-peddolla.reddy@oss.qualcomm.com
[fix comment style]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently the remain_on_channel operation does not support
filtering incoming frames by destination MAC address. This
prevents use cases such as PASN authentication in the
responder side that need to receive frames addressed to a
specific MAC during the off-channel period.
Add an rx_addr parameter to the remain_on_channel operation
callback and propagate it through the call chain from nl80211
to driver implementations. Introduce the extended feature
NL80211_EXT_FEATURE_ROC_ADDR_FILTER as a capability gate so
that cfg80211 rejects the request if the driver does not
advertise support for address filtering. Extract the address
from the NL80211_ATTR_MAC attribute when provided in the
netlink message and update the tracing infrastructure to
include the address in remain_on_channel trace events. The
rx_addr parameter is optional and can be NULL, maintaining
backward compatibility with existing drivers.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-3-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In SME-in-driver mode, the driver handles the entire (re)association
exchange. Userspace (e.g., wpa_supplicant) currently has no explicit
indication of whether the (re)association exchange was encrypted,
making it difficult to distinguish EPP (Enhanced Privacy Protection,
IEEE 802.11bi) associations from non-EPP associations.
When (Re)Association frame encryption is used, the (Re)Association
Response frame must contain a Key Delivery element as specified in
IEEE P802.11bi/D4.0, Table 9-65. Userspace must process this element
only when the (Re)Association Response frame is actually encrypted.
Processing it unconditionally for unencrypted frames leads to incorrect
behavior. Without an explicit indication from the driver, userspace
cannot determine whether encryption was used and whether the Key
Delivery element is valid.
Add a new flag attribute NL80211_ATTR_ASSOC_ENCRYPTED and a
corresponding field "assoc_encrypted" in cfg80211_connect_resp_params
to indicate that both the (Re)Association Request and Response frames
are transmitted encrypted over the air.
For mac80211-based drivers, extend cfg80211_rx_assoc_resp_data with
the assoc_encrypted field as well, which is then propagated to
cfg80211_connect_resp_params.
Pass the flag to userspace via NL80211_CMD_CONNECT event.
Signed-off-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Link: https://patch.msgid.link/20260504123624.529218-2-kavita.kavita@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are 2 types of logical links with a NAN peer:
- management (NMI), which is used for Tx/Rx of NAN management frames.
- data (NDI), which is used for Tx/Rx of data frames, or non-NAN
management frames.
The NMI station has two roles:
- representation of the NAN peer - for example, the peer's schedule
and the HT, VHT, HE capabilities - belong to the NMI station, and not to
the NDI ones.
- Tx/Rx of NAN management frames to/from the peer.
The NDI station is used for Tx/Rx data frames of a specific NDP that was
established with the NAN peer.
Note that a peer can choose to reuse its NMI address as the NDI address.
In that case, it is expected that two stations will be added even though
they will have the same address.
- An NDI station can only be added after the corresponding NMI station
was configured with capabilities.
- All the NDI stations will be removed before the NDI interface is brought
down.
- All NMI stations will be removed before NAN is stopped.
- Before NMI sta removal, all corresponding NDI stations will be removed
Add support for adding, removing, and changing NMI and NDI stations.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260219114327.d280936ee832.I6d859eee759bb5824a9ffd2984410faf879ba00e@changeid
Link: https://patch.msgid.link/20260318123926.206536-6-miriam.rachel.korenblit@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In NAN, unlike in other modes, there is only one set of (HT, VHT, HE)
capabilities that is used for all channels (and bands) used in the NAN
data path.
This set of capabilities will have to be a special one, for example - have
the minimum of (HT-for-5 GHz, HT-for-2.4 GHz), careful handling of the
bits that have a different meaning for each band, etc.
While we could use the exiting sband/iftype capabilities, and require
identical capabilities for all bands (makes no sense since this means
that we will have VHT capabilities in the 2.4 GHz slot),
or require that only one of the sbands will be set,
or have logic to extract the minimum and handle the conflicting bits -
it seems simpler to add a dedicated set of capabilities which is special
for NAN, and is band agnostic, to be populated by the driver.
That way we also let the driver decide how it wants to handle the
conflicting bits.
Add this special set of these capabilities to wiphy:nan_capabilities, to be
populated by the driver.
Send it to user space.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260219114327.4b6f3e4a81b4.I45422adc0df3ad4101d857a92e83f0de5cf241e1@changeid
Link: https://patch.msgid.link/20260318123926.206536-5-miriam.rachel.korenblit@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add an nl80211 API to allow user space to configure the local NAN
schedule.
The local schedule consists of a list of channel definitions and a schedule
map, in which each element covers a time slot and indicates on what
channel the device should be in that time slot.
Channels can be added to schedule even without being scheduled, for
reservation purposes.
A schedule can be configured either immedietally or be deferred, in case
there are already connected peers.
When the deferred flag is set, the command is a request from the device
to perform an announced schedule update: send the updated NAN
Availability - as set in this command - to the peers, and do the
actual switch to the new schedule on the right time (i.e. at the end of
the slot after the slot in which the update was sent to the peers).
In addition, a notification will be sent to indicate a deferred update
completion.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260219114327.ecca178a2de0.Ic977ab08b4ed5cf9b849e55d3a59b01ad3fbd08e@changeid
Link: https://patch.msgid.link/20260318123926.206536-2-miriam.rachel.korenblit@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add an extended feature flag NL80211_EXT_FEATURE_IEEE8021X_AUTH to
allow a driver to indicate support for the IEEE 802.1X authentication
protocol in non-AP STA mode, as defined in
"IEEE P802.11bi/D4.0, 12.16.5".
In case of SME in userspace, the Authentication frame body is prepared
in userspace while the driver finalizes the Authentication frame once
it receives the required fields and elements. The driver indicates
support for IEEE 802.1X authentication using the extended feature flag
so that userspace can initiate IEEE 802.1X authentication.
When the feature flag is set, process IEEE 802.1X Authentication frames
from userspace in non-AP STA mode. If the flag is not set, reject
IEEE 802.1X Authentication frames.
Define a new authentication type NL80211_AUTHTYPE_IEEE8021X for
IEEE 802.1X authentication.
Signed-off-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Link: https://patch.msgid.link/20260226185553.1516290-4-kavita.kavita@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg says:
====================
Another fairly large set of changes, notably:
- cfg80211/mac80211
- most of EPPKE/802.1X over auth frames support
- additional FTM capabilities
- split up drop reasons better, removing generic RX_DROP
- NAN cleanups/fixes
- ath11k:
- support for Channel Frequency Response measurement
- ath12k:
- support for the QCC2072 chipset
- iwlwifi:
- partial NAN support
- UNII-9 support
- some UHR/802.11bn FW APIs
- remove most of MLO/EHT from iwlmvm
(such devices use iwlmld)
- rtw89:
- preparations for RTL8922DE support
* tag 'wireless-next-2026-01-29' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (184 commits)
wifi: iwlegacy: add missing mutex protection in il4965_store_tx_power()
wifi: iwlegacy: add missing mutex protection in il3945_store_measurement()
wifi: mac80211: use u64_stats_t with u64_stats_sync properly
wifi: p54: Fix memory leak in p54_beacon_update()
wifi: cfg80211: treat deprecated INDOOR_SP_AP_OLD control value as LPI mode
wifi: rtw88: sdio: Migrate to use sdio specific shutdown function
wifi: rsi: sdio: Migrate to use sdio specific shutdown function
sdio: Provide a bustype shutdown function
wifi: nl80211/cfg80211: support operating as RSTA in PMSR FTM request
wifi: nl80211/cfg80211: add negotiated burst period to FTM result
wifi: nl80211/cfg80211: clarify periodic FTM parameters for non-EDCA based ranging
wifi: nl80211/cfg80211: add new FTM capabilities
wifi: iwlwifi: rename struct iwl_mcc_allowed_ap_type_cmd::offset_map
wifi: iwlwifi: mvm: Remove link_id from time_events
wifi: iwlwifi: mld: change cluster_id type to u8 array
wifi: iwlwifi: support V13 of iwl_lari_config_change_cmd
wifi: iwlwifi: split bios_value_u32 to separate the header
wifi: iwlwifi: uefi: cache the DSM functions
wifi: iwlwifi: acpi: cache the DSM functions
wifi: iwlwifi: mvm: Cleanup MLO code
...
====================
Link: https://patch.msgid.link/20260129110136.176980-39-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the AP has an advertised TID to Link Mapping (TTLM) it shall
include the element in the association response. As such, when this
element is present it needs to be used for the currently dormant links.
See Draft P802.11REVmf_D1.0 section 35.3.7.2.3 ("Negotiation of TTLM")
for the details. The flag is also not usable in case userspace wants to
specify a negotiated TTLM during association.
Note that for the link reconfiguration case, mac80211 did not use the
information. Draft P802.11REVmf_D1.0 states in section 35.3.6.4 ("Link
reconfiguration to the setup links) that we "shall operate with all the
TIDs mapped to the newly added links ..."
All this means that the flag is not needed. The implementation should
parse the information from the association response.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260118093904.754e057896a5.Ifd06f5ef839a93bfd54d0593dc932870f95f3242@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
After NAN was started, cluster id updates from the user space should not
happen, since the device already started a cluster with the
previousely provided id.
Since NL80211_CMD_CHANGE_NAN_CONFIG requires to set the full NAN
configuration, we can't require that NL80211_NAN_CONF_CLUSTER_ID won't
be included in this command, and keeping the last confgiured value just
to be able to compare it against the new one seems a bit overkill.
Therefore, just ignore cluster id in this command and clarify the
documentation.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260107142229.fb55e5853269.I10d18c8f69d98b28916596d6da4207c15ea4abb5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add an extended feature flag NL80211_EXT_FEATURE_EPPKE to allow a
driver to indicate support for the Enhanced Privacy Protection Key
Exchange (EPPKE) authentication protocol in non-AP STA mode, as
defined in "IEEE P802.11bi/D3.0, 12.16.9".
In case of SME in userspace, the Authentication frame body is prepared
in userspace while the driver finalizes the Authentication frame once
it receives the required fields and elements. The driver indicates
support for EPPKE using the extended feature flag so that userspace
can initiate EPPKE authentication.
When the feature flag is set, process EPPKE Authentication frames from
userspace in non-AP STA mode. If the flag is not set, reject EPPKE
Authentication frames.
Define a new authentication type NL80211_AUTHTYPE_EPPKE for EPPKE.
Signed-off-by: Ainy Kumari <ainy.kumari@oss.qualcomm.com>
Co-developed-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Signed-off-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Link: https://patch.msgid.link/20260114111900.2196941-2-kavita.kavita@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, the S1G channelisation implementation differs from that of
VHT, which is the PHY that S1G is based on. The major difference between
the clock rate is 1/10th of VHT. However how their channelisation is
represented within cfg80211 and mac80211 vastly differ.
To rectify this, remove the use of IEEE80211_CHAN_1/2/4.. flags that were
previously used to indicate the control channel width, however it should be
implied that the control channels are 1MHz in the case of S1G. Additionally,
introduce the invert - being IEEE80211_CHAN_NO_4/8/16MHz - that imply
the control channel may not be used for a certain bandwidth. With these
new flags, we can perform regulatory and chandef validation just as we would
for VHT.
To deal with the notion that S1G PHYs may contain a 2MHz primary channel,
introduce a new variable, s1g_primary_2mhz, which indicates whether we are
operating on a 2MHz primary channel. In this case, the chandef::chan points to
the 1MHz primary channel pointed to by the primary channel location. Alongside
this, introduce some new helper routines that can extract the sibling 1MHz
channel. The sibling being the alternate 1MHz primary subchannel within the
2MHz primary channel that is not pointed to by chandef::chan.
Furthermore, due to unique restrictions imposed on S1G PHYs, introduce
a new flag, IEEE80211_CHAN_S1G_NO_PRIMARY, which states that the 1MHz channel
cannot be used as a primary channel. This is assumed to be set by vendors
as it is hardware and regdom specific, When we validate a 2MHz primary channel,
we need to ensure both 1MHz subchannels do not contain this flag. If one or
both of the 1MHz subchannels contain this flag then the 2MHz primary is not
permitted for use as a primary channel.
Properly integrate S1G channel validation such that it is implemented
according with other PHY types such as VHT. Additionally, implement a new
S1G-specific regulatory flag to allow cfg80211 to understand specific
vendor requirements for S1G PHYs.
Signed-off-by: Arien Judge <arien.judge@morsemicro.com>
Signed-off-by: Andrew Pope <andrew.pope@morsemicro.com>
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250918051913.500781-2-lachlan.hodges@morsemicro.com
[remove redundant NL80211_ATTR_S1G_PRIMARY_2MHZ check]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This notification will be used by the device to inform user space
about upcoming DW. When received, user space will be able to prepare
multicast Service Discovery Frames (SDFs) to be transmitted during the
next DW using %NL80211_CMD_FRAME command on the NAN management interface.
The device/driver will take care to transmit the frames in the correct
timing. This allows to implement a synchronized Discovery Engine (DE)
in user space, if the device doesn't support DE offload.
Note that this notification can be sent before the actual DW starts as
long as the driver/device handles the actual timing of the SDF
transmission.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250908140015.0e1d15031bab.I5b1721e61b63910452b3c5cdcdc1e94cb094d4c9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The so-called fullmac devices rely on firmware functionality and/or API to
change BSS parameters. Today there are limited drivers supporting the
nl80211 primitive, but they only handle a subset of the bss parameters
passed if any. The mac80211 driver does handle all parameters and stores
their configured values. Some of the BSS parameters were already conditional
by wiphy->features. For these the wiphy->bss_param_support and wiphy->features
fields are silently aligned in wiphy_register(). Maybe better to issue a warning
instead when they are misaligned.
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250817190435.1495094-2-arend.vanspriel@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
An S1G TIM PVB is encoded differently compared to a non-s1g TIM PVB.
As the AP dictates which encoding mode it uses, here we only implement
block bitmap encoding. This is the default encoding mode used by
all current vendor implementations.
Additionally, S1G has a maximum AID count of 8192, however we are
limiting the current implementation to 1600. This has no resemblence
to the standard and is purely an implementation detail. The reason for
this is due to the TIM elements maximum length of 255. This allows for,
at most, 25 encoded blocks for a PVB encoded with block bitmap. Support
for the maximum of 8192 AIDs will require an implementation of page slicing
to be added to mac80211.
As a result, we perform extra validation on both the STA and AP side
when receiving an AID as an S1G interface.
Add support for block bitmap encoding for an S1G AP and limit the
maximum AID count to 1600 for the current mac80211 implementations.
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250725132221.258217-2-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
S1G short beacons are an optional frame type used in an S1G BSS
that contain a limited set of elements. While they are optional,
they are a fundamental part of S1G that enables significant
power saving.
Expose 2 additional netlink attributes,
NL80211_ATTR_S1G_LONG_BEACON_PERIOD which denotes the number of beacon
intervals between each long beacon and NL80211_ATTR_S1G_SHORT_BEACON
which is a nested attribute containing the short beacon tail and
head. We split them as the long beacon period cannot be updated,
and is only used when initialisng the interface, whereas the short
beacon data can be used to both initialise and update the templates.
This follows how things such as the beacon interval and DTIM period
currently operate.
During the initialisation path, we ensure we have the long beacon
period if the short beacon data is being passed down, whereas
the update path will simply update the template if its sent down.
The short beacon data is validated using the same routines for regular
beacons as they support correctly parsing the short beacon format
while ensuring the frame is well-formed.
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250717074205.312577-2-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg
Peddolla Harshavardhan Reddy
Kavita Kavita
Miri Korenblit
Hari Chandrakanthan
Janusz Dziedzic
Jakub Kicinski
Avraham Stern
Benjamin Berg
Sai Pratyusha Magam
Ainy Kumari
Lachlan Hodges
Andrei Otcheretianski
Arend van Spriel
Muna Sinada