[ Upstream commit c653ffc283 ]
The only user of hid_snto32() is Logitech HID++ driver, which always
calls hid_snto32() with valid size (constant, either 12 or 8) and
therefore can simply use sign_extend32().
Make the switch and remove hid_snto32(). Move snto32() and s32ton() to
avoid introducing forward declaration.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://patch.msgid.link/20241003144656.3786064-2-dmitry.torokhov@gmail.com
[bentiss: fix checkpatch warning]
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Stable-dep-of: a6b87bfc2a ("HID: core: Harden s32ton() against conversion to 0 bits")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 185c926283 upstream.
in ntrig_report_version(), hdev parameter passed from hid_probe().
sending descriptor to /dev/uhid can make hdev->dev.parent->parent to null
if hdev->dev.parent->parent is null, usb_dev has
invalid address(0xffffffffffffff58) that hid_to_usb_dev(hdev) returned
when usb_rcvctrlpipe() use usb_dev,it trigger
page fault error for address(0xffffffffffffff58)
add null check logic to ntrig_report_version()
before calling hid_to_usb_dev()
Signed-off-by: Minjong Kim <minbell.kim@samsung.com>
Link: https://patch.msgid.link/20250813-hid-ntrig-page-fault-fix-v2-1-f98581f35106@samsung.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ab1bb82f3d upstream.
Adds support for the G PRO 2 LIGHTSPEED Wireless via it's nano receiver
or directly. This nano receiver appears to work identically to the 1_1
receiver for the case I've verified, which is the battery status through
lg-hidpp.
The same appears to be the case wired, sharing much with the Pro X
Superlight 2; differences seemed to lie in userland configuration rather
than in interfaces used by hid_logitech_hidpp on the kernel side.
I verified the sysfs interface for battery charge/discharge status, and
capacity read to be working on my 910-007290 device (white).
Signed-off-by: Matt Coffin <mcoffin13@gmail.com>
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1f3214aae9 upstream.
The Legion Go features detachable controllers which support a dual
dinput mode. In this mode, the controllers appear under a single HID
device with two applications.
Currently, both controllers appear under the same event device, causing
their controls to be mixed up. This patch separates the two so that
they can be used independently.
In addition, the latest firmware update for the Legion Go swaps the IDs
to the ones used by the Legion Go 2, so add those IDs as well.
[jkosina@suse.com: improved shortlog]
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0379eb8691 upstream.
A malicious HID device can trigger a slab out-of-bounds during
mt_report_fixup() by passing in report descriptor smaller than
607 bytes. mt_report_fixup() attempts to patch byte offset 607
of the descriptor with 0x25 by first checking if byte offset
607 is 0x15 however it lacks bounds checks to verify if the
descriptor is big enough before conducting this check. Fix
this bug by ensuring the descriptor size is at least 608
bytes before accessing it.
Below is the KASAN splat after the out of bounds access happens:
[ 13.671954] ==================================================================
[ 13.672667] BUG: KASAN: slab-out-of-bounds in mt_report_fixup+0x103/0x110
[ 13.673297] Read of size 1 at addr ffff888103df39df by task kworker/0:1/10
[ 13.673297]
[ 13.673297] CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Not tainted 6.15.0-00005-gec5d573d83f4-dirty #3
[ 13.673297] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/04
[ 13.673297] Call Trace:
[ 13.673297] <TASK>
[ 13.673297] dump_stack_lvl+0x5f/0x80
[ 13.673297] print_report+0xd1/0x660
[ 13.673297] kasan_report+0xe5/0x120
[ 13.673297] __asan_report_load1_noabort+0x18/0x20
[ 13.673297] mt_report_fixup+0x103/0x110
[ 13.673297] hid_open_report+0x1ef/0x810
[ 13.673297] mt_probe+0x422/0x960
[ 13.673297] hid_device_probe+0x2e2/0x6f0
[ 13.673297] really_probe+0x1c6/0x6b0
[ 13.673297] __driver_probe_device+0x24f/0x310
[ 13.673297] driver_probe_device+0x4e/0x220
[ 13.673297] __device_attach_driver+0x169/0x320
[ 13.673297] bus_for_each_drv+0x11d/0x1b0
[ 13.673297] __device_attach+0x1b8/0x3e0
[ 13.673297] device_initial_probe+0x12/0x20
[ 13.673297] bus_probe_device+0x13d/0x180
[ 13.673297] device_add+0xe3a/0x1670
[ 13.673297] hid_add_device+0x31d/0xa40
[...]
Fixes: c8000deb68 ("HID: multitouch: Add support for GT7868Q")
Cc: stable@vger.kernel.org
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d3af6ca9a8 upstream.
After hid_hw_start() is called hidinput_connect() will eventually be
called to set up the device with the input layer since the
HID_CONNECT_DEFAULT connect mask is used. During hidinput_connect()
all input and output reports are processed and corresponding hid_inputs
are allocated and configured via hidinput_configure_usages(). This
process involves slot tagging report fields and configuring usages
by setting relevant bits in the capability bitmaps. However it is possible
that the capability bitmaps are not set at all leading to the subsequent
hidinput_has_been_populated() check to fail leading to the freeing of the
hid_input and the underlying input device.
This becomes problematic because a malicious HID device like a
ASUS ROG N-Key keyboard can trigger the above scenario via a
specially crafted descriptor which then leads to a user-after-free
when the name of the freed input device is written to later on after
hid_hw_start(). Below, report 93 intentionally utilises the
HID_UP_UNDEFINED Usage Page which is skipped during usage
configuration, leading to the frees.
0x05, 0x0D, // Usage Page (Digitizer)
0x09, 0x05, // Usage (Touch Pad)
0xA1, 0x01, // Collection (Application)
0x85, 0x0D, // Report ID (13)
0x06, 0x00, 0xFF, // Usage Page (Vendor Defined 0xFF00)
0x09, 0xC5, // Usage (0xC5)
0x15, 0x00, // Logical Minimum (0)
0x26, 0xFF, 0x00, // Logical Maximum (255)
0x75, 0x08, // Report Size (8)
0x95, 0x04, // Report Count (4)
0xB1, 0x02, // Feature (Data,Var,Abs)
0x85, 0x5D, // Report ID (93)
0x06, 0x00, 0x00, // Usage Page (Undefined)
0x09, 0x01, // Usage (0x01)
0x15, 0x00, // Logical Minimum (0)
0x26, 0xFF, 0x00, // Logical Maximum (255)
0x75, 0x08, // Report Size (8)
0x95, 0x1B, // Report Count (27)
0x81, 0x02, // Input (Data,Var,Abs)
0xC0, // End Collection
Below is the KASAN splat after triggering the UAF:
[ 21.672709] ==================================================================
[ 21.673700] BUG: KASAN: slab-use-after-free in asus_probe+0xeeb/0xf80
[ 21.673700] Write of size 8 at addr ffff88810a0ac000 by task kworker/1:2/54
[ 21.673700]
[ 21.673700] CPU: 1 UID: 0 PID: 54 Comm: kworker/1:2 Not tainted 6.16.0-rc4-g9773391cf4dd-dirty #36 PREEMPT(voluntary)
[ 21.673700] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
[ 21.673700] Call Trace:
[ 21.673700] <TASK>
[ 21.673700] dump_stack_lvl+0x5f/0x80
[ 21.673700] print_report+0xd1/0x660
[ 21.673700] kasan_report+0xe5/0x120
[ 21.673700] __asan_report_store8_noabort+0x1b/0x30
[ 21.673700] asus_probe+0xeeb/0xf80
[ 21.673700] hid_device_probe+0x2ee/0x700
[ 21.673700] really_probe+0x1c6/0x6b0
[ 21.673700] __driver_probe_device+0x24f/0x310
[ 21.673700] driver_probe_device+0x4e/0x220
[...]
[ 21.673700]
[ 21.673700] Allocated by task 54:
[ 21.673700] kasan_save_stack+0x3d/0x60
[ 21.673700] kasan_save_track+0x18/0x40
[ 21.673700] kasan_save_alloc_info+0x3b/0x50
[ 21.673700] __kasan_kmalloc+0x9c/0xa0
[ 21.673700] __kmalloc_cache_noprof+0x139/0x340
[ 21.673700] input_allocate_device+0x44/0x370
[ 21.673700] hidinput_connect+0xcb6/0x2630
[ 21.673700] hid_connect+0xf74/0x1d60
[ 21.673700] hid_hw_start+0x8c/0x110
[ 21.673700] asus_probe+0x5a3/0xf80
[ 21.673700] hid_device_probe+0x2ee/0x700
[ 21.673700] really_probe+0x1c6/0x6b0
[ 21.673700] __driver_probe_device+0x24f/0x310
[ 21.673700] driver_probe_device+0x4e/0x220
[...]
[ 21.673700]
[ 21.673700] Freed by task 54:
[ 21.673700] kasan_save_stack+0x3d/0x60
[ 21.673700] kasan_save_track+0x18/0x40
[ 21.673700] kasan_save_free_info+0x3f/0x60
[ 21.673700] __kasan_slab_free+0x3c/0x50
[ 21.673700] kfree+0xcf/0x350
[ 21.673700] input_dev_release+0xab/0xd0
[ 21.673700] device_release+0x9f/0x220
[ 21.673700] kobject_put+0x12b/0x220
[ 21.673700] put_device+0x12/0x20
[ 21.673700] input_free_device+0x4c/0xb0
[ 21.673700] hidinput_connect+0x1862/0x2630
[ 21.673700] hid_connect+0xf74/0x1d60
[ 21.673700] hid_hw_start+0x8c/0x110
[ 21.673700] asus_probe+0x5a3/0xf80
[ 21.673700] hid_device_probe+0x2ee/0x700
[ 21.673700] really_probe+0x1c6/0x6b0
[ 21.673700] __driver_probe_device+0x24f/0x310
[ 21.673700] driver_probe_device+0x4e/0x220
[...]
Fixes: 9ce12d8be1 ("HID: asus: Add i2c touchpad support")
Cc: stable@vger.kernel.org
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Link: https://patch.msgid.link/20250810181041.44874-1-qasdev00@gmail.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e94536e1d1 ]
Previously, the battery status (charging/discharging) was not reported
immediately to user-space.
For most input devices, this wasn't problematic because changing their
battery status requires connecting them to a different bus.
For example, a gamepad would report a discharging status while
connected via Bluetooth and a charging status while connected via USB.
However, certain devices are not connected or disconnected when their
battery status changes. For example, a phone battery changes its status
without connecting or disconnecting it.
In these cases, the battery status was not reported immediately to user
space.
Report battery status changes immediately to user space to support
these kinds of devices.
Fixes: a608dc1c06 ("HID: input: map battery system charging")
Reported-by: 卢国宏 <luguohong@xiaomi.com>
Closes: https://lore.kernel.org/linux-input/aI49Im0sGb6fpgc8@fedora/T/
Tested-by: 卢国宏 <luguohong@xiaomi.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a82231b2a8 ]
In preparation for a patch fixing a bug affecting
hidinput_set_battery_charge_status(), rename the function to
hidinput_update_battery_charge_status() and move it up so it can be used
by hidinput_update_battery().
Refactor, no functional changes.
Tested-by: 卢国宏 <luguohong@xiaomi.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Stable-dep-of: e94536e1d1 ("HID: input: report battery status changes immediately")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c061046fe9 upstream.
Currently, the battery timer is set up for all devices using hid-apple,
irrespective of whether they actually have a battery or not.
APPLE_RDESC_BATTERY is a quirk that indicates the device has a battery
and needs the battery timer. This patch checks for this quirk before
setting up the timer, ensuring that only devices with a battery will
have the timer set up.
Fixes: 6e143293e1 ("HID: apple: Report Magic Keyboard battery over USB")
Cc: stable@vger.kernel.org
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9bdc30e35c upstream.
Currently, the battery timer is set up for all devices using
hid-magicmouse, irrespective of whether they actually need it or not.
The current implementation requires the battery timer for Magic Mouse 2
and Magic Trackpad 2 when connected via USB only. Add checks to ensure
that the battery timer is only set up when they are connected via USB.
Fixes: 0b91b4e4da ("HID: magicmouse: Report battery level over USB")
Cc: stable@vger.kernel.org
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1bb3363da8 upstream.
A malicious HID device with quirk APPLE_MAGIC_BACKLIGHT can trigger a NULL
pointer dereference whilst the power feature-report is toggled and sent to
the device in apple_magic_backlight_report_set(). The power feature-report
is expected to have two data fields, but if the descriptor declares one
field then accessing field[1] and dereferencing it in
apple_magic_backlight_report_set() becomes invalid
since field[1] will be NULL.
An example of a minimal descriptor which can cause the crash is something
like the following where the report with ID 3 (power report) only
references a single 1-byte field. When hid core parses the descriptor it
will encounter the final feature tag, allocate a hid_report (all members
of field[] will be zeroed out), create field structure and populate it,
increasing the maxfield to 1. The subsequent field[1] access and
dereference causes the crash.
Usage Page (Vendor Defined 0xFF00)
Usage (0x0F)
Collection (Application)
Report ID (1)
Usage (0x01)
Logical Minimum (0)
Logical Maximum (255)
Report Size (8)
Report Count (1)
Feature (Data,Var,Abs)
Usage (0x02)
Logical Maximum (32767)
Report Size (16)
Report Count (1)
Feature (Data,Var,Abs)
Report ID (3)
Usage (0x03)
Logical Minimum (0)
Logical Maximum (1)
Report Size (8)
Report Count (1)
Feature (Data,Var,Abs)
End Collection
Here we see the KASAN splat when the kernel dereferences the
NULL pointer and crashes:
[ 15.164723] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] SMP KASAN NOPTI
[ 15.165691] KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
[ 15.165691] CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Not tainted 6.15.0 #31 PREEMPT(voluntary)
[ 15.165691] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
[ 15.165691] RIP: 0010:apple_magic_backlight_report_set+0xbf/0x210
[ 15.165691] Call Trace:
[ 15.165691] <TASK>
[ 15.165691] apple_probe+0x571/0xa20
[ 15.165691] hid_device_probe+0x2e2/0x6f0
[ 15.165691] really_probe+0x1ca/0x5c0
[ 15.165691] __driver_probe_device+0x24f/0x310
[ 15.165691] driver_probe_device+0x4a/0xd0
[ 15.165691] __device_attach_driver+0x169/0x220
[ 15.165691] bus_for_each_drv+0x118/0x1b0
[ 15.165691] __device_attach+0x1d5/0x380
[ 15.165691] device_initial_probe+0x12/0x20
[ 15.165691] bus_probe_device+0x13d/0x180
[ 15.165691] device_add+0xd87/0x1510
[...]
To fix this issue we should validate the number of fields that the
backlight and power reports have and if they do not have the required
number of fields then bail.
Fixes: 394ba612f9 ("HID: apple: Add support for magic keyboard backlight on T2 Macs")
Cc: stable@vger.kernel.org
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Reviewed-by: Orlando Chamberlain <orlandoch.dev@gmail.com>
Tested-by: Aditya Garg <gargaditya08@live.com>
Link: https://patch.msgid.link/20250713233008.15131-1-qasdev00@gmail.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0d0777ccaa upstream.
The low level transport driver expects the first byte to be the report
ID, even when the report ID is not use (in which case they just shift
the buffer).
However, __hid_request() whas not offsetting the buffer it used by one
in this case, meaning that the raw_request() callback emitted by the
transport driver would be stripped of the first byte.
Note: this changes the API for uhid devices when a request is made
through hid_hw_request. However, several considerations makes me think
this is fine:
- every request to a HID device made through hid_hw_request() would see
that change, but every request made through hid_hw_raw_request()
already has the new behaviour. So that means that the users are
already facing situations where they might have or not the first byte
being the null report ID when it is 0. We are making things more
straightforward in the end.
- uhid is mainly used for BLE devices
- uhid is also used for testing, but I don't see that change a big issue
- for BLE devices, we can check which kernel module is calling
hid_hw_request()
- and in those modules, we can check which are using a Bluetooth device
- and then we can check if the command is used with a report ID or not.
- surprise: none of the kernel module are using a report ID 0
- and finally, bluez, in its function set_report()[0], does the same
shift if the report ID is 0 and the given buffer has a size > 0.
[0] https://git.kernel.org/pub/scm/bluetooth/bluez.git/tree/profiles/input/hog-lib.c#n879
Reported-by: Alan Stern <stern@rowland.harvard.edu>
Closes: https://lore.kernel.org/linux-input/c75433e0-9b47-4072-bbe8-b1d14ea97b13@rowland.harvard.edu/
Reported-by: syzbot+8258d5439c49d4c35f43@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=8258d5439c49d4c35f43
Tested-by: syzbot+8258d5439c49d4c35f43@syzkaller.appspotmail.com
Fixes: 4fa5a7f76c ("HID: core: implement generic .request()")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250710-report-size-null-v2-2-ccf922b7c4e5@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4a03810803 ]
Ensure we don't stall or panic the kernel when using bluetooth-connected
controllers. This was reported as an issue on android devices using
kernel 6.6 due to the resume hook which had been added for usb joycons.
First, set a new state value to JOYCON_CTLR_STATE_SUSPENDED in a
newly-added nintendo_hid_suspend. This makes sure we will not stall out
the kernel waiting for input reports during led classdev suspend. The
stalls could happen if connectivity is unreliable or lost to the
controller prior to suspend.
Second, since we lose connectivity during suspend, do not try
joycon_init() for bluetooth controllers in the nintendo_hid_resume path.
Tested via multiple suspend/resume flows when using the controller both
in USB and bluetooth modes.
Signed-off-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Reviewed-by: Silvan Jegen <s.jegen@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54bae4c17c ]
The Chicony Electronics HP 5MP Cameras (USB ID 04F2:B824 & 04F2:B82C)
report a HID sensor interface that is not actually implemented.
Attempting to access this non-functional sensor via iio_info causes
system hangs as runtime PM tries to wake up an unresponsive sensor.
Add these 2 devices to the HID ignore list since the sensor interface is
non-functional by design and should not be exposed to userspace.
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a8953f4f7 ]
MARTLINKTECHNOLOGY is a microphone device, when the HID interface in an
audio device is requested to get specific report id, the following error
may occur.
[ 562.939373] usb 1-1.4.1.2: new full-speed USB device number 21 using xhci_hcd
[ 563.104908] usb 1-1.4.1.2: New USB device found, idVendor=4c4a, idProduct=4155, bcdDevice= 1.00
[ 563.104910] usb 1-1.4.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 563.104911] usb 1-1.4.1.2: Product: USB Composite Device
[ 563.104912] usb 1-1.4.1.2: Manufacturer: SmartlinkTechnology
[ 563.104913] usb 1-1.4.1.2: SerialNumber: 20201111000001
[ 563.229499] input: SmartlinkTechnology USB Composite Device as /devices/pci0000:00/0000:00:07.1/0000:04:00.3/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1.2/1-1.4.1.2:1.2/0003:4C4A:4155.000F/input/input35
[ 563.291505] hid-generic 0003:4C4A:4155.000F: input,hidraw2: USB HID v2.01 Keyboard [SmartlinkTechnology USB Composite Device] on usb-0000:04:00.3-1.4.1.2/input2
[ 563.291557] usbhid 1-1.4.1.2:1.3: couldn't find an input interrupt endpoint
[ 568.506654] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110)
[ 573.626656] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110)
[ 578.746657] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110)
[ 583.866655] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110)
[ 588.986657] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110)
Ignore HID interface. The device is working properly.
Signed-off-by: Zhang Heng <zhangheng@kylinos.cn>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 85a720f433 upstream.
When sysfs_create_files() fails in wacom_initialize_remotes() the error
is returned and the cleanup action will not have been registered yet.
As a result the kobject???s refcount is never dropped, so the
kobject can never be freed leading to a reference leak.
Fix this by calling kobject_put() before returning.
Fixes: 83e6b40e2d ("HID: wacom: EKR: have the wacom resources dynamically allocated")
Acked-by: Ping Cheng <ping.cheng@wacom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1a19ae437c upstream.
When sysfs_create_files() fails during wacom_initialize_remotes() the
fifo buffer is not freed leading to a memory leak.
Fix this by calling kfifo_free() before returning.
Fixes: 83e6b40e2d ("HID: wacom: EKR: have the wacom resources dynamically allocated")
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5ae416c5b1 upstream.
During wacom_initialize_remotes() a fifo buffer is allocated
with kfifo_alloc() and later a cleanup action is registered
during devm_add_action_or_reset() to clean it up.
However if the code fails to create a kobject and register it
with sysfs the code simply returns -ENOMEM before the cleanup
action is registered leading to a memory leak.
Fix this by ensuring the fifo is freed when the kobject creation
and registration process fails.
Fixes: 83e6b40e2d ("HID: wacom: EKR: have the wacom resources dynamically allocated")
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9327e3ee5b upstream.
Commit 2f2bd7cbd1 ("hid: lenovo: Resend all settings on reset_resume
for compact keyboards") introduced a regression for ThinkPad TrackPoint
Keyboard II by removing the conditional check for enabling F7/9/11 mode
needed for compact keyboards only. As a result, the non-compact
keyboards can no longer toggle Fn-lock via Fn+Esc, although it can be
controlled via sysfs knob that directly sends raw commands.
This patch restores the previous conditional check without any
additions.
Cc: stable@vger.kernel.org
Fixes: 2f2bd7cbd1 ("hid: lenovo: Resend all settings on reset_resume for compact keyboards")
Signed-off-by: Iusico Maxim <iusico.maxim@libero.it>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f3054152c1 ]
Commit fd2a9b29dc ("HID: wacom: Remove AES power_supply after extended
inactivity") introduced wacom_aes_battery_handler() which is scheduled
as a delayed work (aes_battery_work).
In wacom_remove(), aes_battery_work is not canceled. Consequently, if
the device is removed while aes_battery_work is still pending, then hard
crashes or "Oops: general protection fault..." are experienced when
wacom_aes_battery_handler() is finally called. E.g., this happens with
built-in USB devices after resume from hibernate when aes_battery_work
was still pending at the time of hibernation.
So, take care to cancel aes_battery_work in wacom_remove().
Fixes: fd2a9b29dc ("HID: wacom: Remove AES power_supply after extended inactivity")
Signed-off-by: Thomas Zeitlhofer <thomas.zeitlhofer+lkml@ze-it.at>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit fe7f7ac8e0 upstream.
Update struct hid_descriptor to better reflect the mandatory and
optional parts of the HID Descriptor as per USB HID 1.11 specification.
Note: the kernel currently does not parse any optional HID class
descriptors, only the mandatory report descriptor.
Update all references to member element desc[0] to rpt_desc.
Add test to verify bLength and bNumDescriptors values are valid.
Replace the for loop with direct access to the mandatory HID class
descriptor member for the report descriptor. This eliminates the
possibility of getting an out-of-bounds fault.
Add a warning message if the HID descriptor contains any unsupported
optional HID class descriptors.
Reported-by: syzbot+c52569baf0c843f35495@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c52569baf0c843f35495
Fixes: f043bfc98c ("HID: usbhid: fix out-of-bounds bug")
Cc: stable@vger.kernel.org
Signed-off-by: Terry Junge <linuxhid@cosmicgizmosystems.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fa9fdeea1b ]
This patch adds HID_QUIRK_ALWAYS_POLL for the ADATA XPG wireless gaming mouse (USB ID 125f:7505) and its USB dongle (USB ID 125f:7506). Without this quirk, the device does not generate input events properly.
Signed-off-by: Milton Barrera <miltonjosue2001@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d73a4bfa28 ]
Since "LED_KANA" was defined as "0x04", the shift number should be "4".
Signed-off-by: junan <junan76@163.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 578e1b96fa upstream.
The current HID bpf implementation assumes no output report/request will
go through it after hid_bpf_destroy_device() has been called. This leads
to a bug that unplugging certain types of HID devices causes a cleaned-
up SRCU to be accessed. The bug was previously a hidden failure until a
recent x86 percpu change [1] made it access not-present pages.
The bug will be triggered if the conditions below are met:
A) a device under the driver has some LEDs on
B) hid_ll_driver->request() is uninplemented (e.g., logitech-djreceiver)
If condition A is met, hidinput_led_worker() is always scheduled *after*
hid_bpf_destroy_device().
hid_destroy_device
` hid_bpf_destroy_device
` cleanup_srcu_struct(&hdev->bpf.srcu)
` hid_remove_device
` ...
` led_classdev_unregister
` led_trigger_set(led_cdev, NULL)
` led_set_brightness(led_cdev, LED_OFF)
` ...
` input_inject_event
` input_event_dispose
` hidinput_input_event
` schedule_work(&hid->led_work) [hidinput_led_worker]
This is fine when condition B is not met, where hidinput_led_worker()
calls hid_ll_driver->request(). This is the case for most HID drivers,
which implement it or use the generic one from usbhid. The driver itself
or an underlying driver will then abort processing the request.
Otherwise, hidinput_led_worker() tries hid_hw_output_report() and leads
to the bug.
hidinput_led_worker
` hid_hw_output_report
` dispatch_hid_bpf_output_report
` srcu_read_lock(&hdev->bpf.srcu)
` srcu_read_unlock(&hdev->bpf.srcu, idx)
The bug has existed since the introduction [2] of
dispatch_hid_bpf_output_report(). However, the same bug also exists in
dispatch_hid_bpf_raw_requests(), and I've reproduced (no visible effect
because of the lack of [1], but confirmed bpf.destroyed == 1) the bug
against the commit (i.e., the Fixes:) introducing the function. This is
because hidinput_led_worker() falls back to hid_hw_raw_request() when
hid_ll_driver->output_report() is uninplemented (e.g., logitech-
djreceiver).
hidinput_led_worker
` hid_hw_output_report: -ENOSYS
` hid_hw_raw_request
` dispatch_hid_bpf_raw_requests
` srcu_read_lock(&hdev->bpf.srcu)
` srcu_read_unlock(&hdev->bpf.srcu, idx)
Fix the issue by returning early in the two mentioned functions if
hid_bpf has been marked as destroyed. Though
dispatch_hid_bpf_device_event() handles input events, and there is no
evidence that it may be called after the destruction, the same check, as
a safety net, is also added to it to maintain the consistency among all
dispatch functions.
The impact of the bug on other architectures is unclear. Even if it acts
as a hidden failure, this is still dangerous because it corrupts
whatever is on the address calculated by SRCU. Thus, CC'ing the stable
list.
[1]: commit 9d7de2aa8b ("x86/percpu/64: Use relative percpu offsets")
[2]: commit 9286675a2a ("HID: bpf: add HID-BPF hooks for
hid_hw_output_report")
Closes: https://lore.kernel.org/all/20250506145548.GGaBoi9Jzp3aeJizTR@fat_crate.local/
Fixes: 8bd0488b5e ("HID: bpf: add HID-BPF hooks for hid_hw_raw_requests")
Cc: stable@vger.kernel.org
Signed-off-by: Rong Zhang <i@rong.moe>
Tested-by: Petr Tesarik <petr@tesarici.cz>
Link: https://patch.msgid.link/20250512152420.87441-1-i@rong.moe
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bd07f75120 ]
devm_kasprintf() returns NULL when memory allocation fails. Currently,
uclogic_input_configured() does not check for this case, which results
in a NULL pointer dereference.
Add NULL check after devm_kasprintf() to prevent this issue.
Fixes: dd613a4e45 ("HID: uclogic: Correct devm device reference for hidinput input_dev name")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 09d546303b ]
In thrustmaster_interrupts(), the allocated send_buf is not
freed if the usb_check_int_endpoints() check fails, leading
to a memory leak.
Fix this by ensuring send_buf is freed before returning in
the error path.
Fixes: 50420d7c79 ("HID: hid-thrustmaster: Fix warning in thrustmaster_probe by adding endpoint check")
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2fa0bdf08 ]
As the search for Device Control report is permissive, make sure the
desired field was actually found, before trying to set it.
Fix bitmask clearing as it was erronously using index instead of
index - 1 (HID arrays index is 1-based).
Add last two missing Device Control usages to the defined array.
PID_PAUSE and PID_CONTINUE.
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a575044d5 ]
As per USB PID standard:
INFINITE - Referrers to the maximum value of a range. i.e. if in an 8
bit unsigned field the value of 255 would indicate INFINITE.
Detecting 0xffff (U16_MAX) is still important as we MIGHT get this value
as infinite from some native software as 0 was never actually defined
in Linux' FF api as the infinite value. I'm working on it though.
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c6673e3d1 ]
Ensures the loop count will never exceed the logical_maximum.
Fixes implementation errors happening when applications use the max
value of int32/DWORD as the effect iterations. This could be observed
when running software both native and in wine.
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d4174dc4a ]
If an error happens on the device, the driver will no longer fall
into the trap of reading this status 60 times before it decides that
this reply won't change to success/memory full.
Greatly reduces communication overhead during device error situation.
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e19675c247 ]
Update comments to fully conform to the Linux comment styling.
Define Linux infinite effect duration (0) as FF_INFINITE
Chanage Oleg's name order
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c385f61108 ]
Adds Asetek vendor id and product ids for:
- Invicta
- Forte
- La Prima
- Tony Kanaan
v2:
- Misc spelling fix in driver loaded info
v3:
- Chanage Oleg's name order
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f650dcec3 ]
As noted by Anssi some 20 years ago, pool report is sometimes messed up.
This worked fine on many devices but casued oops on VRS DirectForce PRO.
Here, we're making sure pool report is refetched before trying to access
any of it's fields. While loop was replaced with a for loop + exit
conditions were moved aroud to decrease the possibility of creating an
infinite loop scenario.
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5d98079b2d ]
We only want to refetch the pool report during device init. Reset
function is now called when uploading effects to an empty device so
extract pool fetch to separate function and call it from init before
autocenter check (autocenter check triggered reset during init).
Remove a superfluous pointer declaration and assigment as well.
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8713107221 ]
PID devices can use different exponents for time fields, while Linux
Force Feedback API only supports miliseconds.
Read the exponent of a given time field and scale its value accordingly.
Changes in v7:
- Rescale all time fields, not only period
changes in v9:
- Properly assign fade_lenght, not attack_length to PID_FADE_TIME
Co-developed-by: Makarenko Oleg <oleg@makarenk.ooo>
Signed-off-by: Makarenko Oleg <oleg@makarenk.ooo>
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alan Stern
Dmitry Torokhov
Minjong Kim
Ping Cheng
Matt Coffin
Antheas Kapenekakis
Qasim Ijaz
José Expósito
Aditya Garg
Benjamin Tissoires
Daniel J. Ogorchock
Chia-Lin Kao (AceLan)
Zhang Heng
Akira Inoue
Iusico Maxim
Thomas Zeitlhofer
Luke D. Jones
Terry Junge
Milton Barrera
junan
Rong Zhang
Henry Martin
Tomasz Pakuła