LUNs going into "failed ready running" state observed on >1T and on even
numbers of size (2T, 4T, 6T, 8T and 10T). The issue occurs when DIF is
enabled at the host.
The kernel logs:
Cannot setup S/G List for HBAIO segs 1/1 SGL 512 SCSI 256: 3 0
The host lpfc driver is failing to setup scatter/gather list (protection
data) for the I/Os.
The return type lpfc_bg_setup_sgl()/lpfc_bg_setup_sgl_prot() causes the
compiler to remove the most significant bit. Use an unsigned type instead.
Signed-off-by: Hannes Reinecke <hare@suse.de>
[dwagner: added commit message]
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Link: https://lore.kernel.org/r/20231220162658.12392-1-dwagner@suse.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 4373534a98 ("scsi: core: Move scsi_host_busy() out of host lock
for waking up EH handler") intended to fix a hard lockup issue triggered by
EH. The core idea was to move scsi_host_busy() out of the host lock when
processing individual commands for EH. However, a suggested style change
inadvertently caused scsi_host_busy() to remain under the host lock. Fix
this by calling scsi_host_busy() outside the lock.
Fixes: 4373534a98 ("scsi: core: Move scsi_host_busy() out of host lock for waking up EH handler")
Cc: Sathya Prakash Veerichetty <safhya.prakash@broadcom.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20240203024521.2006455-1-ming.lei@redhat.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 6abe9c1386 ("KVM: X86: Move ignore_msrs handling upper the
stack") changed the 'ignore_msrs' handling, including sanitizing return
values to the caller. This was fine until commit 12bc2132b1 ("KVM:
X86: Do the same ignore_msrs check for feature msrs") which allowed
non-existing feature MSRs to be ignored, i.e. to not generate an error
on the ioctl() level. It even tried to preserve the sanitization of the
return value. However, the logic is flawed, as '*data' will be
overwritten again with the uninitialized stack value of msr.data.
Fix this by simplifying the logic and always initializing msr.data,
vanishing the need for an additional error exit path.
Fixes: 12bc2132b1 ("KVM: X86: Do the same ignore_msrs check for feature msrs")
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20240203124522.592778-2-minipli@grsecurity.net
Signed-off-by: Sean Christopherson <seanjc@google.com>
Nouveau manages GSP-RM DMA buffers with nvkm_gsp_mem objects. Several of
these buffers are never dealloced. Some of them can be deallocated
right after GSP-RM is initialized, but the rest need to stay until the
driver unloads.
Also futher bullet-proof these objects by poisoning the buffer and
clearing the nvkm_gsp_mem object when it is deallocated. Poisoning
the buffer should trigger an error (or crash) from GSP-RM if it tries
to access the buffer after we've deallocated it, because we were wrong
about when it is safe to deallocate.
Finally, change the mem->size field to a size_t because that's the same
type that dma_alloc_coherent expects.
Cc: <stable@vger.kernel.org> # v6.7
Fixes: 176fdcbddf ("drm/nouveau/gsp/r535: add support for booting GSP-RM")
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202230608.1981026-1-ttabi@nvidia.com
The example for PCI devices has some addressing errors. 'reg' is written
as if the parent bus is PCI, but the default bus for examples is 1
address and size cell. 'ranges' is defining config space with a
size of 0. Generally, config space should not be defined in
'ranges', only PCI memory and I/O spaces. Fix these issues by updating
the values with made-up, but valid values.
This was uncovered with recent dtschema changes.
Link: https://lore.kernel.org/r/20240122173514.935742-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
The check in nand_base.c, nand_scan_tail() : has the following code:
(ecc->steps * ecc->size != mtd->writesize) which fails for some NAND chips.
Remove ECC entries in this driver which are not integral multiplications,
and adjust the number of chunks for entries which fails the above
calculation so it will calculate correctly (this was previously done
automatically before the check and was removed in a later commit).
Fixes: 68c18dae68 ("mtd: rawnand: marvell: add missing layouts")
Cc: stable@vger.kernel.org
Signed-off-by: Elad Nachman <enachman@marvell.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
A recent change to check_for_locks() changed it to take ->flc_lock while
holding ->fi_lock. This creates a lock inversion (reported by lockdep)
because there is a case where ->fi_lock is taken while holding
->flc_lock.
->flc_lock is held across ->fl_lmops callbacks, and
nfsd_break_deleg_cb() is one of those and does take ->fi_lock. However
it doesn't need to.
Prior to v4.17-rc1~110^2~22 ("nfsd: create a separate lease for each
delegation") nfsd_break_deleg_cb() would walk the ->fi_delegations list
and so needed the lock. Since then it doesn't walk the list and doesn't
need the lock.
Two actions are performed under the lock. One is to call
nfsd_break_one_deleg which calls nfsd4_run_cb(). These doesn't act on
the nfs4_file at all, so don't need the lock.
The other is to set ->fi_had_conflict which is in the nfs4_file.
This field is only ever set here (except when initialised to false)
so there is no possible problem will multiple threads racing when
setting it.
The field is tested twice in nfs4_set_delegation(). The first test does
not hold a lock and is documented as an opportunistic optimisation, so
it doesn't impose any need to hold ->fi_lock while setting
->fi_had_conflict.
The second test in nfs4_set_delegation() *is* make under ->fi_lock, so
removing the locking when ->fi_had_conflict is set could make a change.
The change could only be interesting if ->fi_had_conflict tested as
false even though nfsd_break_one_deleg() ran before ->fi_lock was
unlocked. i.e. while hash_delegation_locked() was running.
As hash_delegation_lock() doesn't interact in any way with nfs4_run_cb()
there can be no importance to this interaction.
So this patch removes the locking from nfsd_break_one_deleg() and moves
the final test on ->fi_had_conflict out of the locked region to make it
clear that locking isn't important to the test. It is still tested
*after* vfs_setlease() has succeeded. This might be significant and as
vfs_setlease() takes ->flc_lock, and nfsd_break_one_deleg() is called
under ->flc_lock this "after" is a true ordering provided by a spinlock.
Fixes: edcf972515 ("nfsd: fix RELEASE_LOCKOWNER")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
For DMA mode, the bus width of the DMA is equal to the size of data
word, so burst length should be configured as bits per word.
For CPU mode, because of the spi transfer len is in byte, so calculate
the total number of words according to spi transfer len and bits per
word, burst length should be configured as total data bits.
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Reviewed-by: Clark Wang <xiaoning.wang@nxp.com>
Fixes: e9b220aeac ("spi: spi-imx: correctly configure burst length when using dma")
Fixes: 5f66db08cb ("spi: imx: Take in account bits per word instead of assuming 8-bits")
Link: https://lore.kernel.org/r/20240204091912.36488-1-carlos.song@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The tascodec_init() of the snd-soc-tas2781-comlib module is called from
snd-soc-tas2781-i2c and snd-hda-scodec-tas2781-i2c modules. It calls
request_firmware_nowait() with parameter THIS_MODULE and a cont/callback
from the latter modules.
The latter modules can be removed while their callbacks are running,
resulting in a general protection failure.
Add module parameter to tascodec_init() so request_firmware_nowait() can
be called with the module of the callback.
Fixes: ef3bcde75d ("ASoC: tas2781: Add tas2781 driver")
CC: stable@vger.kernel.org
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/118dad922cef50525e5aab09badef2fa0eb796e5.1707076603.git.soyer@irl.hu
Signed-off-by: Mark Brown <broonie@kernel.org>
In very slow environments, most big TCP cases including
segmentation and reassembly of big TCP packets have a good
chance to fail: by default the TCP client uses write size
well below 64K. If the host is low enough autocorking is
unable to build real big TCP packets.
Address the issue using much larger write operations.
Note that is hard to observe the issue without an extremely
slow and/or overloaded environment; reduce the TCP transfer
time to allow for much easier/faster reproducibility.
Fixes: 6bb382bcf7 ("selftests: add a selftest for big tcp")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Howells says:
====================
rxrpc: Miscellaneous fixes
Here some miscellaneous fixes for AF_RXRPC:
(1) The zero serial number has a special meaning in an ACK packet serial
reference, so skip it when assigning serial numbers to transmitted
packets.
(2) Don't set the reference serial number in a delayed ACK as the ACK
cannot be used for RTT calculation.
(3) Don't emit a DUP ACK response to a PING RESPONSE ACK coming back to a
call that completed in the meantime.
(4) Fix the counting of acks and nacks in ACK packet to better drive
congestion management. We want to know if there have been new
acks/nacks since the last ACK packet, not that there are still
acks/nacks. This is more complicated as we have to save the old SACK
table and compare it.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the counting of new acks and nacks when parsing a packet - something
that is used in congestion control.
As the code stands, it merely notes if there are any nacks whereas what we
really should do is compare the previous SACK table to the new one,
assuming we get two successive ACK packets with nacks in them. However, we
really don't want to do that if we can avoid it as the tables might not
correspond directly as one may be shifted from the other - something that
will only get harder to deal with once extended ACK tables come into full
use (with a capacity of up to 8192).
Instead, count the number of nacks shifted out of the old SACK, the number
of nacks retained in the portion still active and the number of new acks
and nacks in the new table then calculate what we need.
Note this ends up a bit of an estimate as the Rx protocol allows acks to be
withdrawn by the receiver and packets requested to be retransmitted.
Fixes: d57a3a1516 ("rxrpc: Save last ACK's SACK table rather than marking txbufs")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
In the Rx protocol, every packet generated is marked with a per-connection
monotonically increasing serial number. This number can be referenced in
an ACK packet generated in response to an incoming packet - thereby
allowing the sender to use this for RTT determination, amongst other
things.
However, if the reference field in the ACK is zero, it doesn't refer to any
incoming packet (it could be a ping to find out if a packet got lost, for
example) - so we shouldn't generate zero serial numbers.
Fix the generation of serial numbers to retry if it comes up with a zero.
Furthermore, since the serial numbers are only ever allocated within the
I/O thread this connection is bound to, there's no need for atomics so
remove that too.
Fixes: 17926a7932 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
In kasan_init_region, when k_start is not page aligned, at the begin of
for loop, k_cur = k_start & PAGE_MASK is less than k_start, and then
`va = block + k_cur - k_start` is less than block, the addr va is invalid,
because the memory address space from va to block is not alloced by
memblock_alloc, which will not be reserved by memblock_reserve later, it
will be used by other places.
As a result, memory overwriting occurs.
for example:
int __init __weak kasan_init_region(void *start, size_t size)
{
[...]
/* if say block(dcd97000) k_start(feef7400) k_end(feeff3fe) */
block = memblock_alloc(k_end - k_start, PAGE_SIZE);
[...]
for (k_cur = k_start & PAGE_MASK; k_cur < k_end; k_cur += PAGE_SIZE) {
/* at the begin of for loop
* block(dcd97000) va(dcd96c00) k_cur(feef7000) k_start(feef7400)
* va(dcd96c00) is less than block(dcd97000), va is invalid
*/
void *va = block + k_cur - k_start;
[...]
}
[...]
}
Therefore, page alignment is performed on k_start before
memblock_alloc() to ensure the validity of the VA address.
Fixes: 663c0c9496 ("powerpc/kasan: Fix shadow area set up for modules.")
Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/1705974359-43790-1-git-send-email-xiaojiangfeng@huawei.com
MMU_FTR_USE_HIGH_BATS is set for G2_LE cores and derivatives like e300cX,
but the high BATs need to be enabled in HID2 to work. Add register
definitions and add the needed setup to __setup_cpu_603.
This fixes boot on CPUs like the MPC5200B with STRICT_KERNEL_RWX enabled
on systems where the flag has not been set by the bootloader already.
Fixes: e4d6654ebe ("powerpc/mm/32s: rework mmu_mapin_ram()")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240124103838.43675-1-matthias.schiffer@ew.tq-group.com
Calling get_system_loc_code before checking devfd and errno fails the test
when the device is not available, the expected behaviour is a SKIP.
Change the order of 'SKIP_IF_MSG' to correctly SKIP when the /dev/
papr-vpd device is not available.
Test output before:
Test FAILED on line 271
Test output after:
[SKIP] Test skipped on line 266: /dev/papr-vpd not present
Signed-off-by: R Nageswara Sastry <rnsastry@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240131130859.14968-1-rnsastry@linux.ibm.com
Nysal reported that userspace backtraces are missing in offcputime bcc
tool. As an example:
$ sudo ./bcc/tools/offcputime.py -uU
Tracing off-CPU time (us) of user threads by user stack... Hit Ctrl-C to end.
^C
write
- python (9107)
8
write
- sudo (9105)
9
mmap
- python (9107)
16
clock_nanosleep
- multipathd (697)
3001604
The offcputime bcc tool attaches a bpf program to a kprobe on
finish_task_switch(), which is usually hit on a syscall from userspace.
With the switch to system call vectored, we started setting
pt_regs->link to zero. This is because system call vectored behaves like
a function call with LR pointing to the system call return address, and
with no modification to SRR0/SRR1. The LR value does indicate our next
instruction, so it is being saved as pt_regs->nip, and pt_regs->link is
being set to zero. This is not a problem by itself, but BPF uses perf
callchain infrastructure for capturing stack traces, and that stores LR
as the second entry in the stack trace. perf has code to cope with the
second entry being zero, and skips over it. However, generic userspace
unwinders assume that a zero entry indicates end of the stack trace,
resulting in a truncated userspace stack trace.
Rather than fixing all userspace unwinders to ignore/skip past the
second entry, store the real LR value in pt_regs->link so that there
continues to be a valid, though duplicate entry in the stack trace.
With this change:
$ sudo ./bcc/tools/offcputime.py -uU
Tracing off-CPU time (us) of user threads by user stack... Hit Ctrl-C to end.
^C
write
write
[unknown]
[unknown]
[unknown]
[unknown]
[unknown]
PyObject_VectorcallMethod
[unknown]
[unknown]
PyObject_CallOneArg
PyFile_WriteObject
PyFile_WriteString
[unknown]
[unknown]
PyObject_Vectorcall
_PyEval_EvalFrameDefault
PyEval_EvalCode
[unknown]
[unknown]
[unknown]
_PyRun_SimpleFileObject
_PyRun_AnyFileObject
Py_RunMain
[unknown]
Py_BytesMain
[unknown]
__libc_start_main
- python (1293)
7
write
write
[unknown]
sudo_ev_loop_v1
sudo_ev_dispatch_v1
[unknown]
[unknown]
[unknown]
[unknown]
__libc_start_main
- sudo (1291)
7
syscall
syscall
bpf_open_perf_buffer_opts
[unknown]
[unknown]
[unknown]
[unknown]
_PyObject_MakeTpCall
PyObject_Vectorcall
_PyEval_EvalFrameDefault
PyEval_EvalCode
[unknown]
[unknown]
[unknown]
_PyRun_SimpleFileObject
_PyRun_AnyFileObject
Py_RunMain
[unknown]
Py_BytesMain
[unknown]
__libc_start_main
- python (1293)
11
clock_nanosleep
clock_nanosleep
nanosleep
sleep
[unknown]
[unknown]
__clone
- multipathd (698)
3001661
Fixes: 7fa95f9ada ("powerpc/64s: system call support for scv/rfscv instructions")
Cc: stable@vger.kernel.org
Reported-by: "Nysal Jan K.A" <nysal@linux.ibm.com>
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240202154316.395276-1-naveen@kernel.org
Louis Peens says:
====================
nfp: a few simple driver fixes
This is combining a few unrelated one-liner fixes which have been
floating around internally into a single series. I'm not sure what is
the least amount of overhead for reviewers, this or a separate
submission per-patch? I guess it probably depends on personal
preference, but please let me know if there is a strong preference to
rather split these in the future.
Summary:
Patch1: Fixes an old issue which was hidden because 0 just so happens to
be the correct value.
Patch2: Fixes a corner case for flower offloading with bond ports
Patch3: Re-enables the 'NETDEV_XDP_ACT_REDIRECT', which was accidentally
disabled after a previous refactor.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Enable previously excluded xdp feature flag for NFD3 devices. This
feature flag is required in order to bind nfp interfaces to an xdp
socket and the nfp driver does in fact support the feature.
Fixes: 66c0e13ad2 ("drivers: net: turn on XDP features")
Cc: stable@vger.kernel.org # 6.3+
Signed-off-by: James Hershaw <james.hershaw@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When physical ports are reset (either through link failure or manually
toggled down and up again) that are slaved to a Linux bond with a tunnel
endpoint IP address on the bond device, not all tunnel packets arriving
on the bond port are decapped as expected.
The bond dev assigns the same MAC address to itself and each of its
slaves. When toggling a slave device, the same MAC address is therefore
offloaded to the NFP multiple times with different indexes.
The issue only occurs when re-adding the shared mac. The
nfp_tunnel_add_shared_mac() function has a conditional check early on
that checks if a mac entry already exists and if that mac entry is
global: (entry && nfp_tunnel_is_mac_idx_global(entry->index)). In the
case of a bonded device (For example br-ex), the mac index is obtained,
and no new index is assigned.
We therefore modify the conditional in nfp_tunnel_add_shared_mac() to
check if the port belongs to the LAG along with the existing checks to
prevent a new global mac index from being re-assigned to the slave port.
Fixes: 20cce88650 ("nfp: flower: enable MAC address sharing for offloadable devs")
CC: stable@vger.kernel.org # 5.1+
Signed-off-by: Daniel de Villiers <daniel.devilliers@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 1st and 2nd expansion BAR configuration registers are configured,
when the driver starts up, in variables 'barcfg_msix_general' and
'barcfg_msix_xpb', respectively. The 'LengthSelect' field is ORed in
from bit 0, which is incorrect. The 'LengthSelect' field should
start from bit 27.
This has largely gone un-noticed because
NFP_PCIE_BAR_PCIE2CPP_LengthSelect_32BIT happens to be 0.
Fixes: 4cb584e0ee ("nfp: add CPP access core")
Cc: stable@vger.kernel.org # 4.11+
Signed-off-by: Daniel Basilio <daniel.basilio@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The .compat section is a dummy PE section that contains the address of
the 32-bit entrypoint of the 64-bit kernel image if it is bootable from
32-bit firmware (i.e., CONFIG_EFI_MIXED=y)
This section is only 8 bytes in size and is only referenced from the
loader, and so it is placed at the end of the memory view of the image,
to avoid the need for padding it to 4k, which is required for sections
appearing in the middle of the image.
Unfortunately, this violates the PE/COFF spec, and even if most EFI
loaders will work correctly (including the Tianocore reference
implementation), PE loaders do exist that reject such images, on the
basis that both the file and memory views of the file contents should be
described by the section headers in a monotonically increasing manner
without leaving any gaps.
So reorganize the sections to avoid this issue. This results in a slight
padding overhead (< 4k) which can be avoided if desired by disabling
CONFIG_EFI_MIXED (which is only needed in rare cases these days)
Fixes: 3e3eabe26d ("x86/boot: Increase section and file alignment to 4k/512")
Reported-by: Mike Beaton <mjsbeaton@gmail.com>
Link: https://lkml.kernel.org/r/CAHzAAWQ6srV6LVNdmfbJhOwhBw5ZzxxZZ07aHt9oKkfYAdvuQQ%40mail.gmail.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
This reverts commit 095b96b2b8.
Marek reported the similar change in imx8mp-dhcom-pdk3.dts
caused a regression:
"This patch breaks USB-C port on this board.
If I plug in USB-C storage device, it is not detected. If I revert this
patch, it is detected.
Please drop this patch for now."
Revert it here as well.
Fixes: 095b96b2b8 ("arm64: dts: imx8mn-var-som-symphony: Describe the USB-C connector")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
IOVDD is supplied by 1.8V, fix the referenced regulator.
Fixes: d8f9d81265 ("arm64: dts: imx8mp: Add analog audio output on i.MX8MP TQMa8MPxL/MBa8MPxL")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Make loading ib_srpt with this parameter set work. The current behavior is
that setting that parameter while loading the ib_srpt kernel module
triggers the following kernel crash:
BUG: kernel NULL pointer dereference, address: 0000000000000000
Call Trace:
<TASK>
parse_one+0x18c/0x1d0
parse_args+0xe1/0x230
load_module+0x8de/0xa60
init_module_from_file+0x8b/0xd0
idempotent_init_module+0x181/0x240
__x64_sys_finit_module+0x5a/0xb0
do_syscall_64+0x5f/0xe0
entry_SYSCALL_64_after_hwframe+0x6e/0x76
Cc: LiHonggang <honggangli@163.com>
Reported-by: LiHonggang <honggangli@163.com>
Fixes: a42d985bd5 ("ib_srpt: Initial SRP Target merge for v3.3-rc1")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240205004207.17031-1-bvanassche@acm.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Calling fd_install() makes a file reachable for userland, including the
possibility to close the file descriptor, which leads to calling its
'release' hook. If that happens before the code had a chance to bump the
reference of the newly created task struct, the release callback will
call put_task_struct() too early, leading to the premature destruction
of the kernel thread.
Avoid that race by calling fd_install() later, after all the setup is
done.
Fixes: 1c6fdbd8f2 ("bcachefs: Initial commit")
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Some PAPR system parameter values are formatted by firmware as
nul-terminated strings (e.g. LPAR name, shared processor attributes).
But the values returned for other parameters, such as processor module
info and TLB block invalidate characteristics, are binary data with
parameter-specific layouts. So char[] isn't the appropriate type for
the general case. Use u8/__u8.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Fixes: 905b9e4878 ("powerpc/pseries/papr-sysparm: Expose character device to user space")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240202-papr-sysparm-ioblock-data-use-u8-v1-1-f5c6c89f65ec@linux.ibm.com
SEO HOYOUNG
Alice Chao
Hannes Reinecke
Ming Lei
Mathias Krause
Felix Fietkau
Timur Tabi
Dave Airlie
Rob Herring
Elad Nachman
NeilBrown
Carlos Song
Gergo Koteles
Cezary Rojewski
Jeffrey Hugo
Dan Carpenter
Joonas Lahtinen
Miquel Raynal
Paolo Abeni
David S. Miller
David Howells
Jiangfeng Xiao
Matthias Schiffer
R Nageswara Sastry
Naveen N Rao
Gaurav Batra
Maxime Ripard
James Hershaw
Daniel de Villiers
Daniel Basilio
Han Xu
Ard Biesheuvel
Fabio Estevam
Alexander Stein
Bart Van Assche
Shuming Fan
bo liu
Kent Overstreet
Nathan Lynch
Zhi Wang
Zhenyu Wang
Andrew Morton