Merge series from André Draszik <andre.draszik@linaro.org>:
This series extends the existing S2MPG10 PMIC driver to add support for
the regulators, and adds new S2MPG11 core and regulator drivers.
The patches are kept together in one series, due to S2MPG11 and its
regulators being very similar to S2MPG10.
The Samsung S2MPG11 PMIC is a Power Management IC for mobile
applications with buck converters, various LDOs, power meters, and
additional GPIO interfaces. It typically complements an S2MPG10 PMIC in
a main/sub configuration as the sub-PMIC and both are used on the
Google Pixel 6 and 6 Pro (oriole / raven).
A DT update for Oriole / Raven to enable these is required which I will
send out separately.
REGULATOR_LINEAR_VRANGE is similar to REGULATOR_LINEAR_RANGE, but
allows a more natural declaration of a voltage range for a regulator,
in that it expects the minimum and maximum values as voltages rather
than as selectors.
Using voltages arguably makes this macro easier to use by drivers and
code using it can become easier to read compared to
REGULATOR_LINEAR_RANGE.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260122-s2mpg1x-regulators-v7-10-3b1f9831fffd@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Since commit 98e48cd928 ("regulator: core: resolve supply for
boot-on/always-on regulators"), the regulator core returns
-EPROBE_DEFER if a supply can not be resolved at regulator_register()
time due to set_machine_constraints() requiring that supply (e.g.
because of always-on or boot-on).
In some hardware designs, multiple PMICs are used where individual
rails of each act as supplies for rails of the other, and vice-versa.
In such a design no PMIC driver can probe when registering one top-
level regulator device (as is common practice for almost all regulator
drivers in Linux) since that commit. Supplies are only considered when
their driver has fully bound, but because in a design like the above
two drivers / devices depend on each other, neither will have fully
bound while the other probes. The Google Pixel 6 and 6 Pro (oriole and
raven) are examples of such a design.
One way to make this work would be to register each rail as an
individual device, rather than just one top-level regulator device.
Then, fw-devlink and Linux' driver core could do their usual handling
of deferred device probe as each rail would be probed individually.
This approach was dismissed in [1] as each regulator driver would have
to take care of this itself.
Alternatively, we can change the regulator core to not fail
regulator_register() if a rail's required supply can not be resolved
while keeping the intended change from above mentioned commit, and
instead retry whenever a new rail is registered. This commit implements
such an approach:
If set_machine_constraints() requests probe deferral,
regulator_register() still succeeds and we retry setting
constraints as part of regulator_resolve_supply().
We still do not enable the regulator or allow consumers to use it
until constraints have been set (including resolution of the
supply) to prevent enabling of a regulator before its supply.
With this change, we keep track of regulators with missing required
supplies and can therefore try to resolve them again and try to set
the constraints again once more regulators become available.
Care has to be taken to not allow consumers to use regulators that
haven't had their constraints set yet. regulator_get() ensures that
and now returns -EPROBE_DEFER in that case.
The implementation is straight-forward, thanks to our newly introduced
regulator-bus. Locking in regulator_resolve_supply() has to be done
carefully, as a combination of regulator_(un)lock_two() and
regulator_(un)lock_dependent() is needed. The reason is that
set_machine_constraints() might call regulator_enable() which needs
rdev and all its dependents locked, but everything else requires to
only have rdev and its supply locked.
Link: https://lore.kernel.org/all/aRn_-o-vie_QoDXD@sirena.co.uk/ [1]
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260109-regulators-defer-v2-8-1a25dc968e60@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When a regulator A and its supply B are provided by different devices,
the driver implementing B might be last to probe (with A still
pending resolution of its supply B). While we try to resolve all
pending supplies for all regulators (including A) during
regulator_register() of B via regulator_register_resolve_supply(),
supply resolution will still not work for A as the driver for B hasn't
finished binding to the PMIC device corresponding to B at that stage
yet. The regulator core explicitly only allows supplies from other
devices to be used once the relevant driver has fully bound, mainly to
avoid having to deal with cases where B itself might -EPROBE_DEFER.
In this case, A's supply will only be resolved as part of the core's
regulator_init_complete_work_function(), which currently is scheduled
to run after 30s. This was added as a work-around in
commit 3827b64dba ("regulator: core: Resolve supplies before
disabling unused regulators") to cover this situation.
There are two problems with that approach:
* it potentially runs long after all our consumers have probed
* an upcoming change will allow regulator_register() to complete
successfully even when required supplies (e.g. due to always-on or
boot-on) are missing at register time, deferring full configuration
of the regulator (and usability by consumers, i.e. usually consumer
probe) until the supply becomes available.
Resolving supplies in the late work func can therefore make it
impossible for consumers to probe at all, as the driver core will not
know to reprobe consumers when supplies have resolved.
We could schedule an earlier work to try to resolve supplies sooner,
but that'd be racy as consumers of A might try to probe before A's
supply gets fully resolved via this extra work.
Instead, add a very simple regulator bus and add a dummy device with a
corresponding driver to it for each regulator that is missing its
supply during regulator_register(). This way, the driver core will call
our bus' probe whenever a new (regulator) device was successfully
bound, allowing us to retry resolving the supply during (our bus) probe
and to bind this dummy device if successful. In turn this means the
driver core will see a newly bound device and retry probing of all
pending consumers, if any.
With that in place, we can avoid walking the full list of all known
regulators to try resolve missing supplies during regulator_register(),
as the driver core will invoke the bus probe for regulators that are
still pending their supplies. We can also drop the code trying to
resolve supplies one last time before unused regulators get disabled,
as all supplies should have resolved at that point in time, and if they
haven't then there's no point in trying again, as the outcome won't
change.
Note: We can not reuse the existing struct device created for each
rail, as a device can not be part of a class and a bus simultaneously.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260109-regulators-defer-v2-7-1a25dc968e60@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>:
This series adds support for three new MediaTek PMICs: MT6316, MT6363
and MT6373 and their variants - used in board designs featuring the
MediaTek MT8196 Chromebook SoC, or the MT6991 Dimensity 9400 Smartphone
SoC.
In particular, MT6316 is a regulator, but the MT6363 and MT6373 PMICs
are multi-function devices, as they have and expose multiple sub-devices;
moreover, some of those also contain an interrupt controller, managing
internal IPs interrupts: for those, a chained interrupt handler is
registered, which parent is the SPMI controller itself.
This series adds support for all of the MT6316 regulator variants and
for MT6363, MT6373 SPMI PMICs and their interrupt controller.
Forward critical supply events downstream so consumers can react in
time. An under-voltage event on an upstream rail may otherwise never
reach end devices (e.g. eMMC).
Register a notifier on a regulator's supply when the supply is resolved,
and forward only REGULATOR_EVENT_UNDER_VOLTAGE to the consumer's notifier
chain. Event handling is deferred to process context via a workqueue; the
consumer rdev is lifetime-pinned and the rdev lock is held while calling
the notifier chain. The notifier is unregistered on regulator teardown.
No DT/UAPI changes. Behavior applies to all regulators with a supply.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20251001105650.2391477-1-o.rempel@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
When restarting a CPU powered by the PCA9450 power management IC, it
is beneficial to use the PCA9450 to power cycle the CPU and all its
connected peripherals to start up in a known state. The PCA9450 features
a cold start procedure initiated by an I2C command.
Add a restart handler so that the PCA9450 is used to restart the CPU.
The restart handler sends command 0x14 to the SW_RST register,
initiating a cold reset (Power recycle all regulators except LDO1, LDO2
and CLK_32K_OUT)
As the PCA9450 is a PMIC specific for the i.MX8M family CPU, the restart
handler priority is set just slightly higher than imx2_wdt and the PSCI
restart handler. This makes sure this restart handler takes precedence.
Signed-off-by: Paul Geurts <paul.geurts@prodrive-technologies.com>
Link: https://patch.msgid.link/20250505115936.1946891-1-paul.geurts@prodrive-technologies.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Rockchip power-domain controller also plans to make use of
per-domain regulators similar to the MediaTek power-domain controller.
Since existing DTs are missing the regulator information, the kernel
should fallback to the automatically created dummy regulator if
necessary. Thus the version without the _optional suffix is needed.
The Rockchip driver plans to use the managed version, but to be
consistent with existing code the unmanaged version is added at the
same time.
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20250220-rk3588-gpu-pwr-domain-regulator-v6-1-a4f9c24e5b81@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull regulator updates from Mark Brown:
"This was a very quiet release, aside from some smaller improvements we
have:
- Support for power budgeting on regulators, initially targeted at
some still in review support for PSE controllers but generally
useful
- Support for error interrupts from ROHM BD96801 devices
- Support for NXP PCA9452"
* tag 'regulator-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: dt-bindings: Add regulator-power-budget-milliwatt property
regulator: Add support for power budget
regulator: core: Resolve supply using of_node from regulator_config
regulator: of: Implement the unwind path of of_regulator_match()
regulator: tps65219: Remove debugging helper function
regulator: tps65219: Remove MODULE_ALIAS
regulator: tps65219: Update driver name
regulator: tps65219: Use dev_err_probe() instead of dev_err()
regulator: dt-bindings: mt6315: Drop regulator-compatible property
regulator: pca9450: Add PMIC pca9452 support
regulator: dt-bindings: pca9450: Add pca9452 support
regulator: pca9450: Use dev_err_probe() to simplify code
regulator: pca9450: add enable_value for all bucks
regulator: bd96801: Add ERRB IRQ
Since these are hidden inside CONFIG_REGULATOR, building the consumer
drivers without CONFIG_REGULATOR will result in the following build error:
>> drivers/pci/pwrctrl/slot.c:39:15: error: implicit declaration of
function 'of_regulator_bulk_get_all'; did you mean 'regulator_bulk_get'?
[-Werror=implicit-function-declaration]
39 | ret = of_regulator_bulk_get_all(dev, dev_of_node(dev),
| ^~~~~~~~~~~~~~~~~~~~~~~~~
| regulator_bulk_get
cc1: some warnings being treated as errors
This also removes the duplicated definitions that were possibly added to
fix the build issues.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501020407.HmQQQKa0-lkp@intel.com/
Fixes: 27b9ecc7a9 ("regulator: Add of_regulator_bulk_get_all")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/20250104115058.19216-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The machine specific regulator_init() appears to be unused.
It does not allow a lot of interaction with the regulator framework,
since nothing from the framework is passed along (desc, config,
etc ...)
Machine specific init may also be done with the added init_cb() in
the regulator description, so remove regulator_init().
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patch.msgid.link/20241008-regulator-ignored-data-v2-3-d1251e0ee507@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Provide an initialisation callback to handle runtime parameters.
The idea is similar to the regulator_init() callback, but it provides
regulator specific structures, instead of just the driver specific data.
As an example, this allows the driver to amend the regulator constraints
based on runtime parameters if necessary.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patch.msgid.link/20241008-regulator-ignored-data-v2-2-d1251e0ee507@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are existing uses for a devres version of of_regulator_get_optional()
in power domain drivers. On MediaTek platforms, power domains may have
regulator supplies tied to them. The driver currently tries to use
devm_regulator_get() to not have to manage the lifecycle, but ends up
doing it in a very hacky way by replacing the device node of the power
domain controller device to the device node of the power domain that is
currently being registered, getting the supply, and reverting the device
node.
Provide a better API so that the hack can be replaced.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20240925093807.1026949-3-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The to-be-introduced I2C component prober needs to enable regulator
supplies (and toggle GPIO pins) for the various components it intends
to probe. To support this, a new "pure DT lookup" method for getting
regulator supplies is needed, since the device normally requesting
the supply won't get created until after the component is probed to
be available.
Add a new of_regulator_get_optional() function for this. This mirrors
the existing regulator_get_optional() function, but is OF-specific.
The underlying code that supports the existing regulator_get*()
functions has been reworked in previous patches to support this
specific case.
Also convert an existing usage of "dev && dev->of_node" to
"dev_of_node(dev)".
Link: https://lore.kernel.org/all/20231220203537.83479-2-jernej.skrabec@gmail.com/ [1]
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20240925093807.1026949-2-wenst@chromium.org
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Biju Das <biju.das.jz@bp.renesas.com>:
As per RZ/G2L HW manual, VBUS enable can be controlled by the VBOUT bit of
the VBUS Control Register(VBENCTL) register in the USBPHY Control. But
this IP is in the Reset block.
Reset driver exposes this register as regmap and instantiate the USB VBUS
regulator device. Consumers(phy device) can use regulator APIs to control
VBUS as controlling is done in the atomic context using a new API which
is added for the purpose.
Based on pahole, 2 holes can be combined in 'struct regulator_bulk_data'.
On x86_64 and allmodconfig, this shrinks the size of the structure from 32
to 24 bytes.
This is usually a win, because this structure is often used for static
global variables.
As an example:
Before:
text data bss dec hex filename
3557 162 0 3719 e87 drivers/gpu/drm/msm/dsi/dsi_cfg.o
After:
text data bss dec hex filename
3477 162 0 3639 e37 drivers/gpu/drm/msm/dsi/dsi_cfg.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://msgid.link/r/35c4edf2dbc6d4f24fb771341ded2989ae32f779.1715512259.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull regulator fixes from Mark Brown:
"A bunch of fixes that came in during the merge window.
Matti found several issues with some of the more complexly configured
Rohm regulators and the helpers they use and there were some errors in
the specification of tps6594 when regulators are grouped together"
* tag 'regulator-fix-v6.10-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: tps6594-regulator: Correct multi-phase configuration
regulator: tps6287x: Force writing VSEL bit
regulator: pickable ranges: don't always cache vsel
regulator: rohm-regulator: warn if unsupported voltage is set
regulator: bd71828: Don't overwrite runtime voltages
Some PMICs treat the vsel_reg same as apply-bit. Eg, when voltage range
is changed, the new voltage setting is not taking effect until the vsel
register is written.
Add a flag 'range_applied_by_vsel' to the regulator desc to indicate this
behaviour and to force the vsel value to be written to hardware if range
was changed, even if the old selector was same as the new one.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://msgid.link/r/ZktCpcGZdgHWuN_L@fedora
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull regulator updates from Mark Brown:
"There's one API update here, a new API factoring out a common pattern
for reference voltage supplies. These are supplies used as a reference
by analogue circuits where the consumer requests and enables the
supply, reads the voltage to calibrate the user and then never touches
it again. This is factored out into a single operation which just
returns the voltage and uses devm_ to manage the request and enable
portion.
Otherwise this has been a very quiet release, we've got some new
device support, some small fixes, housekeeping and cleanup work but
nothing substantial.
There's also some non-regulator changes in here, a number of users for
the new reference voltage API were merged along with it and some MFD
changes were pulled in as dependencies for new driver work.
Highlights:
- Add a new API for single operation handling of reference voltages
- Support for Allwinner AXP717 and D1, and NXP PCA9561A"
* tag 'regulator-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (33 commits)
regulator: sun20i: Add Allwinner D1 LDOs driver
regulator: dt-bindings: Add Allwinner D1 system LDOs
regulator: Mention regulator id in error message about dummy supplies
staging: iio: impedance-analyzer: ad5933: Use devm_regulator_get_enable_read_voltage()
iio: frequency: admv1013: Use devm_regulator_get_enable_read_voltage()
iio: addac: ad74115: Use devm_regulator_get_enable_read_voltage()
hwmon: (adc128d818) simplify final return in probe
regulator: devres: fix devm_regulator_get_enable_read_voltage() return
hwmon: (da9052) Use devm_regulator_get_enable_read_voltage()
hwmon: (adc128d818) Use devm_regulator_get_enable_read_voltage()
regulator: devres: add API for reference voltage supplies
regulator: rtq2208: Fix LDO discharge register and add vsel setting
regulator: dt-bindings: fixed-regulator: Add a preferred node name
regulator: axp20x: add support for the AXP717
mfd: axp20x: Add support for AXP717 PMIC
dt-bindings: mfd: x-powers,axp152: Document AXP717
regulator: axp20x: fix typo-ed identifier
dt-bindings: regulator: qcom,usb-vbus-regulator: Add PM7250B compatible
regulator: pca9450: add pca9451a support
regulator: dt-bindings: pca9450: add pca9451a support
...
Merge series from David Lechner <dlechner@baylibre.com>:
In the IIO subsystem, we noticed a pattern in many drivers where we need
to get, enable and get the voltage of a supply that provides a reference
voltage. In these cases, we only need the voltage and not a handle to
the regulator. Another common pattern is for chips to have an internal
reference voltage that is used when an external reference is not
available. There are also a few drivers outside of IIO that do the same.
So we would like to propose a new regulator consumer API to handle these
specific cases to avoid repeating the same boilerplate code in multiple
drivers.
As an example of how these functions are used, I have included a few
patches to consumer drivers. But to avoid a giant patch bomb, I have
omitted the iio/adc and iio/dac patches I have prepared from this
series. I will send those separately but these will add 36 more users
of devm_regulator_get_enable_read_voltage() in addition to the 6 here.
In total, this will eliminate nearly 1000 lines of similar code and will
simplify writing and reviewing new drivers in the future.
The devm_regulator_get_enable_optional() should be a 'call and forget'
API, meaning, when it is used to enable the regulators, the API does not
provide a handle to do any further control of the regulators. It gives
no real benefit to return an error from the stub if CONFIG_REGULATOR is
not set.
On the contrary, returning an error is causing problems to drivers when
hardware is such it works out just fine with no regulator control.
Returning an error forces drivers to specifically handle the case where
CONFIG_REGULATOR is not set, making the mere existence of the stub
questionalble.
Change the stub implementation for the
devm_regulator_get_enable_optional() to return Ok so drivers do not
separately handle the case where the CONFIG_REGULATOR is not set.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Fixes: da279e6965 ("regulator: Add devm helpers for get and enable")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/ZiedtOE00Zozd3XO@fedora
Signed-off-by: Mark Brown <broonie@kernel.org>
The devm_regulator_get_enable() should be a 'call and forget' API,
meaning, when it is used to enable the regulators, the API does not
provide a handle to do any further control of the regulators. It gives
no real benefit to return an error from the stub if CONFIG_REGULATOR is
not set.
On the contrary, returning and error is causing problems to drivers when
hardware is such it works out just fine with no regulator control.
Returning an error forces drivers to specifically handle the case where
CONFIG_REGULATOR is not set, making the mere existence of the stub
questionalble. Furthermore, the stub of the regulator_enable() seems to
be returning Ok.
Change the stub implementation for the devm_regulator_get_enable() to
return Ok so drivers do not separately handle the case where the
CONFIG_REGULATOR is not set.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reported-by: Aleksander Mazur <deweloper@wp.pl>
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Fixes: da279e6965 ("regulator: Add devm helpers for get and enable")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/ZiYF6d1V1vSPcsJS@drtxq0yyyyyyyyyyyyyby-3.rev.dnainternet.fi
Signed-off-by: Mark Brown <broonie@kernel.org>
The dvs gpio was still using a legacy number passed from the
platform data. There are no in-tree users of the platform data
so just switch it to a gpio descriptor and obtain it in probe(),
the device tree users will work just as fine with this.
Drop the entirely unused enable_gpio from the platform data
as well. The device tree bindings mentions this but the driver
does not look for it and makes no use of it: it should probably
be implemented properly in a separate patch.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://msgid.link/r/20240220-descriptors-regulators-v1-1-097f608694be@linaro.org
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
When support for the MT6366 PMIC regulators was added, it was assumed
that it had the same functionality as MT6358. In reality there are
differences. A few regulators have different ranges, or were renamed
and repurposed, or removed altogether.
Add the 3 regulators that were missing from the original submission.
These are added for completeness. VSRAM_CORE is not used in existing
projects. VM18 and VMDDR feed DRAM related consumers, and are not used
in-kernel.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230928085537.3246669-11-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Right now the regulator helpers expect raw register values for the range
selectors. This is different from the voltage selectors, which are
normalized as bitfield values. This leads to a bit of confusion. Also,
raw values are harder to copy from datasheets or match up with them,
as datasheets will typically have bitfield values.
Make the helpers expect bitfield values, and convert existing users. The
field in regulator_desc is renamed to |linear_range_selectors_bitfield|.
This is intended to cause drivers added in the same merge window and
out-of-tree drivers using the incorrect variable and values to break,
preventing incorrect values being used on actual hardware and potentially
producing magic smoke.
Also include bitops.h explicitly for ffs(), and reorder the header include
statements. While at it, also replace module.h with export.h, since the
only use is EXPORT_SYMBOL_GPL.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20230714081408.274567-1-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull regulator updates from Mark Brown:
"This release is almost all drivers, there's some small improvements in
the core but otherwise everything is updates to drivers, mostly the
addition of new ones.
There's also a bunch of changes pulled in from the MFD subsystem as
dependencies, Rockchip and TI core MFD code that the regulator drivers
depend on.
I've also yet again managed to put a SPI commit in the regulator tree,
I don't know what it is about those two trees (this for
spi-geni-qcom).
Summary:
- Support for Renesas RAA215300, Rockchip RK808, Texas Instruments
TPS6594 and TPS6287x, and X-Powers AXP15060 and AXP313a"
* tag 'regulator-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (43 commits)
regulator: Add Renesas PMIC RAA215300 driver
regulator: dt-bindings: Add Renesas RAA215300 PMIC bindings
regulator: ltc3676: Use maple tree register cache
regulator: ltc3589: Use maple tree register cache
regulator: helper: Document ramp_delay parameter of regulator_set_ramp_delay_regmap()
regulator: mt6358: Use linear voltage helpers for single range regulators
regulator: mt6358: Const-ify mt6358_regulator_info data structures
regulator: mt6358: Drop *_SSHUB regulators
regulator: mt6358: Merge VCN33_* regulators
regulator: dt-bindings: mt6358: Drop *_sshub regulators
regulator: dt-bindings: mt6358: Merge ldo_vcn33_* regulators
regulator: dt-bindings: pwm-regulator: Add missing type for "pwm-dutycycle-unit"
regulator: Switch two more i2c drivers back to use .probe()
spi: spi-geni-qcom: Do not do DMA map/unmap inside driver, use framework instead
soc: qcom: geni-se: Add interfaces geni_se_tx_init_dma() and geni_se_rx_init_dma()
regulator: tps6594-regulator: Add driver for TI TPS6594 regulators
regulator: axp20x: Add AXP15060 support
regulator: axp20x: Add support for AXP313a variant
dt-bindings: pfuze100.yaml: Add an entry for interrupts
regulator: stm32-pwr: Fix regulator disabling
...
The *_SSHUB regulators are actually alternate configuration interfaces
for their non *_SSHUB counterparts. They are not separate regulator
outputs. These registers are intended for the companion processor to
use to configure the power rails while the main processor is sleeping.
They are not intended for the main operating system to use.
Since they are not real outputs they shouldn't be modeled separately.
Remove them. Luckily no device tree actually uses them.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20230609083009.2822259-5-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The VCN33_BT and VCN33_WIFI regulators are actually the same regulator,
having the same voltage setting and output pin. There are simply two
enable bits that are ORed together to enable the regulator.
Having two regulators representing the same output pin is misleading
from a design matching standpoint, and also error-prone in driver
implementations. If consumers try to set different voltages on either
regulator, the one set later would override the one set before. There
are ways around this, such as chaining them together and having the
downstream one act as a switch. But given there's only one output pin,
such a workaround doesn't match reality.
Remove the VCN33_WIFI regulator. During the probe phase, have the driver
sync the enable status of VCN33_WIFI to VCN33_BT. Also drop the suffix
so that the regulator name matches the pin name in the datasheet.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20230609083009.2822259-4-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Mark Brown
André Draszik
Martijn de Gouw
AngeloGioacchino Del Regno
Oleksij Rempel
Dzmitry Sankouski
Andy Shevchenko
Sumanth Gavini
Paul Geurts
Sebastian Reichel
Linus Torvalds
Kory Maincent
Manivannan Sadhasivam
Joy Zou
Jerome Brunet
Chen-Yu Tsai
Douglas Anderson
Biju Das
Christophe JAILLET
Matti Vaittinen
David Lechner
Linus Walleij
Naresh Solanki
Yue Haibing
Teresa Remmet