[ Upstream commit 4107a1aeb2 ]
On powerpc, a CPU does not necessarily originate from NUMA node 0.
This contrasts with architectures like x86, where CPU 0 is not
hot-pluggable, making NUMA node 0 a consistently valid node.
This discrepancy can lead to failures when creating a map on NUMA
node 0, which is initialized by default, if no CPUs are allocated
from NUMA node 0.
This patch fixes the issue by setting NUMA_NO_NODE (-1) for map
creation for this selftest.
Fixes: 96eabe7a40 ("bpf: Allow selecting numa node during map creation")
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/cf1f61468b47425ecf3728689bc9636ddd1d910e.1738302337.git.skb99@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a63a631c9b ]
There are two bpf_link__destroy(freplace_link) calls in
test_tailcall_bpf2bpf_freplace(). After the first bpf_link__destroy()
is called, if the following bpf_map_{update,delete}_elem() throws an
exception, it will jump to the "out" label and call bpf_link__destroy()
again, causing double free and eventually leading to a segfault.
Fix it by directly resetting freplace_link to NULL after the first
bpf_link__destroy() call.
Fixes: 021611d33e ("selftests/bpf: Add test to verify tailcall and freplace restrictions")
Signed-off-by: Tengda Wu <wutengda@huaweicloud.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/bpf/20250122022838.1079157-1-wutengda@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de07b18289 ]
The strncmp benchmark uses the bpf_strncmp helper and a hand-written
loop to compare two strings. The values of the strings are filled from
userspace. One of the strings is non-const (in .bss) while the other is
const (in .rodata) since that is the requirement of bpf_strncmp.
The problem is that in the hand-written loop, Clang optimizes the reads
from the const string to always return 0 which breaks the benchmark.
Use barrier_var to prevent the optimization.
The effect can be seen on the strncmp-no-helper variant.
Before this change:
# ./bench strncmp-no-helper
Setting up benchmark 'strncmp-no-helper'...
Benchmark 'strncmp-no-helper' started.
Iter 0 (112.309us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 1 (-23.238us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 2 ( 58.994us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 3 (-30.466us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 4 ( 29.996us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 5 ( 16.949us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 6 (-60.035us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Summary: hits 0.000 ± 0.000M/s ( 0.000M/prod), drops 0.000 ± 0.000M/s, total operations 0.000 ± 0.000M/s
After this change:
# ./bench strncmp-no-helper
Setting up benchmark 'strncmp-no-helper'...
Benchmark 'strncmp-no-helper' started.
Iter 0 ( 77.711us): hits 5.534M/s ( 5.534M/prod), drops 0.000M/s, total operations 5.534M/s
Iter 1 ( 11.215us): hits 6.006M/s ( 6.006M/prod), drops 0.000M/s, total operations 6.006M/s
Iter 2 (-14.253us): hits 5.931M/s ( 5.931M/prod), drops 0.000M/s, total operations 5.931M/s
Iter 3 ( 59.087us): hits 6.005M/s ( 6.005M/prod), drops 0.000M/s, total operations 6.005M/s
Iter 4 (-21.379us): hits 6.010M/s ( 6.010M/prod), drops 0.000M/s, total operations 6.010M/s
Iter 5 (-20.310us): hits 5.861M/s ( 5.861M/prod), drops 0.000M/s, total operations 5.861M/s
Iter 6 ( 53.937us): hits 6.004M/s ( 6.004M/prod), drops 0.000M/s, total operations 6.004M/s
Summary: hits 5.969 ± 0.061M/s ( 5.969M/prod), drops 0.000 ± 0.000M/s, total operations 5.969 ± 0.061M/s
Fixes: 9c42652f8b ("selftests/bpf: Add benchmark for bpf_strncmp() helper")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/bpf/20250313122852.1365202-1-vmalik@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 67a2f86846 upstream.
We noticed that uffd-stress test was always failing to run when invoked
for the hugetlb profiles on x86_64 systems with a processor count of 64 or
bigger:
...
# ------------------------------------
# running ./uffd-stress hugetlb 128 32
# ------------------------------------
# ERROR: invalid MiB (errno=9, @uffd-stress.c:459)
...
# [FAIL]
not ok 3 uffd-stress hugetlb 128 32 # exit=1
...
The problem boils down to how run_vmtests.sh (mis)calculates the size of
the region it feeds to uffd-stress. The latter expects to see an amount
of MiB while the former is just giving out the number of free hugepages
halved down. This measurement discrepancy ends up violating uffd-stress'
assertion on number of hugetlb pages allocated per CPU, causing it to bail
out with the error above.
This commit fixes that issue by adjusting run_vmtests.sh's
half_ufd_size_MB calculation so it properly renders the region size in
MiB, as expected, while maintaining all of its original constraints in
place.
Link: https://lkml.kernel.org/r/20250218192251.53243-1-aquini@redhat.com
Fixes: 2e47a445d7 ("selftests/mm: run_vmtests.sh: fix hugetlb mem size calculation")
Signed-off-by: Rafael Aquini <raquini@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3c7d51b0d2 upstream.
In UP systems p->migration_disabled is not available. Fix this by using
the portable helper is_migration_disabled(p).
Fixes: e9fe182772 ("sched_ext: selftests/dsp_local_on: Fix sporadic failures")
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fd07912411 ]
The script uses non-POSIX features like `[[` for conditionals and hence
does not work when run with a POSIX /bin/sh.
Change the shebang to /bin/bash instead, like the other tests in cgroup.
Signed-off-by: Bharadwaj Raju <bharadwaj.raju777@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9fe182772 ]
dsp_local_on has several incorrect assumptions, one of which is that
p->nr_cpus_allowed always tracks p->cpus_ptr. This is not true when a task
is scheduled out while migration is disabled - p->cpus_ptr is temporarily
overridden to the previous CPU while p->nr_cpus_allowed remains unchanged.
This led to sporadic test faliures when dsp_local_on_dispatch() tries to put
a migration disabled task to a different CPU. Fix it by keeping the previous
CPU when migration is disabled.
There are SCX schedulers that make use of p->nr_cpus_allowed. They should
also implement explicit handling for p->migration_disabled.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Ihor Solodrai <ihor.solodrai@pm.me>
Cc: Andrea Righi <arighi@nvidia.com>
Cc: Changwoo Min <changwoo@igalia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 695469c07a upstream.
damon_nr_regions.py updates max_nr_regions to a number smaller than
expected number of real regions and confirms DAMON respect the harsh
limit. To give time for DAMON to make changes for the regions, 3
aggregation intervals (300 milliseconds) are given.
The internal mechanism works with not only the max_nr_regions, but also
sz_limit, though. It avoids merging region if that casn make region of
size larger than sz_limit. In the test, sz_limit is set too small to
achive the new max_nr_regions, unless it is updated for the new
min_nr_regions. But the update is done only once per operations set
update interval, which is one second by default.
Hence, the test randomly incurs false positive failures. Fix it by
setting the ops interval same to aggregation interval, to make sure
sz_limit is updated by the time of the check.
Link: https://lkml.kernel.org/r/20250225222333.505646-3-sj@kernel.org
Fixes: 8bf890c816 ("selftests/damon/damon_nr_regions: test online-tuned max_nr_regions")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1c684d77df upstream.
Patch series "selftests/damon: three fixes for false results".
Fix three DAMON selftest bugs that cause two and one false positive
failures and successes.
This patch (of 3):
damos_quota.py assumes the quota will always exceeded. But whether quota
will be exceeded or not depend on the monitoring results. Actually the
monitored workload has chaning access pattern and hence sometimes the
quota may not really be exceeded. As a result, false positive test
failures happen. Expect how much time the quota will be exceeded by
checking the monitoring results, and use it instead of the naive
assumption.
Link: https://lkml.kernel.org/r/20250225222333.505646-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20250225222333.505646-2-sj@kernel.org
Fixes: 51f58c9da1 ("selftests/damon: add a test for DAMOS quota")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 713e788c0e upstream.
When working on OpenRISC support for restartable sequences I noticed
and fixed these two issues with the riscv support bits.
1 The 'inc' argument to RSEQ_ASM_OP_R_DEREF_ADDV was being implicitly
passed to the macro. Fix this by adding 'inc' to the list of macro
arguments.
2 The inline asm input constraints for 'inc' and 'off' use "er", The
riscv gcc port does not have an "e" constraint, this looks to be
copied from the x86 port. Fix this by just using an "r" constraint.
I have compile tested this only for riscv. However, the same fixes I
use in the OpenRISC rseq selftests and everything passes with no issues.
Fixes: 171586a6ab ("selftests/rseq: riscv: Template memory ordering and percpu access mode")
Signed-off-by: Stafford Horne <shorne@gmail.com>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250114170721.3613280-1-shorne@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1cbddbddee ]
Some drivers, like tg3, do not set combined-count:
$ ethtool -l enp4s0f1
Channel parameters for enp4s0f1:
Pre-set maximums:
RX: 4
TX: 4
Other: n/a
Combined: n/a
Current hardware settings:
RX: 4
TX: 1
Other: n/a
Combined: n/a
In the case where combined-count is not set, the ethtool netlink code
in the kernel elides the value and the code in the test:
netnl.channels_get(...)
With a tg3 device, the returned dictionary looks like:
{'header': {'dev-index': 3, 'dev-name': 'enp4s0f1'},
'rx-max': 4,
'rx-count': 4,
'tx-max': 4,
'tx-count': 1}
Note that the key 'combined-count' is missing. As a result of this
missing key the test raises an exception:
# Exception| if channels['combined-count'] == 0:
# Exception| ~~~~~~~~^^^^^^^^^^^^^^^^^^
# Exception| KeyError: 'combined-count'
Change the test to check if 'combined-count' is a key in the dictionary
first and if not assume that this means the driver has separate RX and
TX queues.
With this change, the test now passes successfully on tg3 and mlx5
(which does have a 'combined-count').
Fixes: 1cf2704242 ("net: selftest: add test for netdev netlink queue-get API")
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250226181957.212189-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d798ce3f4c ]
Ensure that trusted PTR_TO_BTF_ID accesses perform PROBE_MEM handling in
raw_tp program. Without the previous fix, this selftest crashes the
kernel due to a NULL-pointer dereference. Also ensure that dead code
elimination does not kick in for checks on the pointer.
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241104171959.2938862-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stable-dep-of: 5da7e15fb5 ("net: Add rx_skb of kfree_skb to raw_tp_null_args[].")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d3f3b4367 ]
Check number of paths by fib_info_num_path(),
and update_or_create_fnhe() for every path.
Problem is that pmtu is cached only for the oif
that has received icmp message "need to frag",
other oifs will still try to use "default" iface mtu.
An example topology showing the problem:
| host1
+---------+
| dummy0 | 10.179.20.18/32 mtu9000
+---------+
+-----------+----------------+
+---------+ +---------+
| ens17f0 | 10.179.2.141/31 | ens17f1 | 10.179.2.13/31
+---------+ +---------+
| (all here have mtu 9000) |
+------+ +------+
| ro1 | 10.179.2.140/31 | ro2 | 10.179.2.12/31
+------+ +------+
| |
---------+------------+-------------------+------
|
+-----+
| ro3 | 10.10.10.10 mtu1500
+-----+
|
========================================
some networks
========================================
|
+-----+
| eth0| 10.10.30.30 mtu9000
+-----+
| host2
host1 have enabled multipath and
sysctl net.ipv4.fib_multipath_hash_policy = 1:
default proto static src 10.179.20.18
nexthop via 10.179.2.12 dev ens17f1 weight 1
nexthop via 10.179.2.140 dev ens17f0 weight 1
When host1 tries to do pmtud from 10.179.20.18/32 to host2,
host1 receives at ens17f1 iface an icmp packet from ro3 that ro3 mtu=1500.
And host1 caches it in nexthop exceptions cache.
Problem is that it is cached only for the iface that has received icmp,
and there is no way that ro3 will send icmp msg to host1 via another path.
Host1 now have this routes to host2:
ip r g 10.10.30.30 sport 30000 dport 443
10.10.30.30 via 10.179.2.12 dev ens17f1 src 10.179.20.18 uid 0
cache expires 521sec mtu 1500
ip r g 10.10.30.30 sport 30033 dport 443
10.10.30.30 via 10.179.2.140 dev ens17f0 src 10.179.20.18 uid 0
cache
So when host1 tries again to reach host2 with mtu>1500,
if packet flow is lucky enough to be hashed with oif=ens17f1 its ok,
if oif=ens17f0 it blackholes and still gets icmp msgs from ro3 to ens17f1,
until lucky day when ro3 will send it through another flow to ens17f0.
Signed-off-by: Vladimir Vdovin <deliran@verdict.gg>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20241108093427.317942-1-deliran@verdict.gg
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 139512191b ("ipv4: use RCU protection in __ip_rt_update_pmtu()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5368a67307 upstream.
The '-f' parameter is there to force the kernel to emit MPTCP FASTCLOSE
by closing the connection with unread bytes in the receive queue.
The xdisconnect() helper was used to stop the connection, but it does
more than that: it will shut it down, then wait before reconnecting to
the same address. This causes the mptcp_join's "fastclose test" to fail
all the time.
This failure is due to a recent change, with commit 218cc16632
("selftests: mptcp: avoid spurious errors on disconnect"), but that went
unnoticed because the test is currently ignored. The recent modification
only shown an existing issue: xdisconnect() doesn't need to be used
here, only the shutdown() part is needed.
Fixes: 6bf41020b7 ("selftests: mptcp: update and extend fastclose test-cases")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250204-net-mptcp-sft-conn-f-v1-1-6b470c72fffa@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 235174b2be ]
Commit 4094871db1 ("udp: only do GSO if # of segs > 1") avoided GSO
for small packets. But the kernel currently dismisses GSO requests only
after checking MTU/PMTU on gso_size. This means any packets, regardless
of their payload sizes, could be dropped when PMTU becomes smaller than
requested gso_size. We encountered this issue in production and it
caused a reliability problem that new QUIC connection cannot be
established before PMTU cache expired, while non GSO sockets still
worked fine at the same time.
Ideally, do not check any GSO related constraints when payload size is
smaller than requested gso_size, and return EMSGSIZE instead of EINVAL
on MTU/PMTU check failure to be more specific on the error cause.
Fixes: 4094871db1 ("udp: only do GSO if # of segs > 1")
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 021611d33e upstream.
Add a test case to ensure that attaching a tail callee program with an
freplace program fails, and that updating an extended program to a
prog_array map is also prohibited.
This test is designed to prevent the potential infinite loop issue caused
by the combination of tail calls and freplace, ensuring the correct
behavior and stability of the system.
Additionally, fix the broken tailcalls/tailcall_freplace selftest
because an extension prog should not be tailcalled.
cd tools/testing/selftests/bpf; ./test_progs -t tailcalls
337/25 tailcalls/tailcall_freplace:OK
337/26 tailcalls/tailcall_bpf2bpf_freplace:OK
337 tailcalls:OK
Summary: 1/26 PASSED, 0 SKIPPED, 0 FAILED
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20241015150207.70264-3-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
[ Yifei: bpf freplace update is backported to linux-6.12 by commit 987aa730ba
("bpf: Prevent tailcall infinite loop caused by freplace"). It will cause
selftest #336/25 failed. ]
Signed-off-by: Yifei Liu <yifei.l.liu@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 336d02bc4c upstream.
When porting librseq commit:
commit c7b45750fa85 ("Adapt to glibc __rseq_size feature detection")
from librseq to the kernel selftests, the following line was missed
at the end of rseq_init():
rseq_size = get_rseq_kernel_feature_size();
which effectively leaves rseq_size initialized to -1U when glibc does not
have rseq support. glibc supports rseq from version 2.35 onwards.
In a following librseq commit
commit c67d198627c2 ("Only set 'rseq_size' on first thread registration")
to mimic the libc behavior, a new approach is taken: don't set the
feature size in 'rseq_size' until at least one thread has successfully
registered. This allows using 'rseq_size' in fast-paths to test for both
registration status and available features. The caveat is that on libc
either all threads are registered or none are, while with bare librseq
it is the responsability of the user to register all threads using rseq.
This combines the changes from the following librseq git commits:
commit c7b45750fa85 ("Adapt to glibc __rseq_size feature detection")
commit c67d198627c2 ("Only set 'rseq_size' on first thread registration")
Fixes: a0cc649353 ("selftests/rseq: Fix mm_cid test failure")
Reported-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Raghavendra Rao Ananta <rananta@google.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Carlos O'Donell <carlos@redhat.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Michael Jeanson <mjeanson@efficios.com>
Cc: linux-kselftest@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9b06d5b956 ]
Package build environments like Fedora rpmbuild introduced hardening
options (e.g. -pie -Wl,-z,now) by passing a -spec option to CFLAGS
and LDFLAGS.
Some Makefiles currently override CFLAGS but not LDFLAGS, which leads
to a mismatch and build failure, for example:
/usr/bin/ld: /tmp/ccd2apay.o: relocation R_X86_64_32 against
`.rodata.str1.1' can not be used when making a PIE object; recompile with -fPIE
/usr/bin/ld: failed to set dynamic section sizes: bad value
collect2: error: ld returned 1 exit status
make[1]: *** [../../lib.mk:222: tools/testing/selftests/net/lib/csum] Error 1
openvswitch/Makefile CFLAGS currently do not appear to be used, but
fix it anyway for the case when new tests are introduced in future.
Fixes: 1d0dc857b5 ("selftests: drv-net: add checksum tests")
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/3d173603ee258f419d0403363765c9f9494ff79a.1737635092.git.jstancek@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 23b3a7c4a7 ]
Package build environments like Fedora rpmbuild introduced hardening
options (e.g. -pie -Wl,-z,now) by passing a -spec option to CFLAGS
and LDFLAGS.
mptcp Makefile currently overrides CFLAGS but not LDFLAGS, which leads
to a mismatch and build failure, for example:
make[1]: *** [../../lib.mk:222: tools/testing/selftests/net/mptcp/mptcp_sockopt] Error 1
/usr/bin/ld: /tmp/ccqyMVdb.o: relocation R_X86_64_32 against `.rodata.str1.8' can not be used when making a PIE object; recompile with -fPIE
/usr/bin/ld: failed to set dynamic section sizes: bad value
collect2: error: ld returned 1 exit status
Fixes: cc937dad85 ("selftests: centralize -D_GNU_SOURCE= to CFLAGS in lib.mk")
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/7abc701da9df39c2d6cd15bc3cf9e6cee445cb96.1737621162.git.jstancek@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73b9075f33 ]
Currently, when we run the BPF selftests with the following command:
make -C tools/testing/selftests TARGETS=bpf SKIP_TARGETS=""
The command generates untracked files and directories with make version
less than 4.4:
'''
Untracked files:
(use "git add <file>..." to include in what will be committed)
tools/testing/selftests/bpfFEATURE-DUMP.selftests
tools/testing/selftests/bpffeature/
'''
We lost slash after word "bpf". The reason is slash appending code is as
follow:
'''
OUTPUT := $(OUTPUT)/
$(eval include ../../../build/Makefile.feature)
OUTPUT := $(patsubst %/,%,$(OUTPUT))
'''
This way of assigning values to OUTPUT will never be effective for the
variable OUTPUT provided via the command argument [1] and BPF makefile
is called from parent Makfile(tools/testing/selftests/Makefile) like:
'''
all:
...
$(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET
'''
According to GNU make, we can use override Directive to fix this issue [2].
[1] https://www.gnu.org/software/make/manual/make.html#Overriding
[2] https://www.gnu.org/software/make/manual/make.html#Override-Directive
Fixes: dc3a8804d7 ("selftests/bpf: Adapt OUTPUT appending logic to lower versions of Make")
Signed-off-by: Jiayuan Chen <mrpre@163.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20241224075957.288018-1-mrpre@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d33dc1bc3 ]
With CONFIG_KPROBES_ON_FTRACE enabled on powerpc, ftrace_location_range
returns ftrace location for bpf_fentry_test1 at offset of 4 bytes from
function entry. This is because branch to _mcount function is at offset
of 4 bytes in function profile sequence.
To fix this, add entry_offset of 4 bytes while verifying the address for
kprobe entry address of bpf_fentry_test1 in verify_perf_link_info in
selftest, when CONFIG_KPROBES_ON_FTRACE is enabled.
Disassemble of bpf_fentry_test1:
c000000000e4b080 <bpf_fentry_test1>:
c000000000e4b080: a6 02 08 7c mflr r0
c000000000e4b084: b9 e2 22 4b bl c00000000007933c <_mcount>
c000000000e4b088: 01 00 63 38 addi r3,r3,1
c000000000e4b08c: b4 07 63 7c extsw r3,r3
c000000000e4b090: 20 00 80 4e blr
When CONFIG_PPC_FTRACE_OUT_OF_LINE [1] is enabled, these function profile
sequence is moved out of line with an unconditional branch at offset 0.
So, the test works without altering the offset for
'CONFIG_KPROBES_ON_FTRACE && CONFIG_PPC_FTRACE_OUT_OF_LINE' case.
Disassemble of bpf_fentry_test1:
c000000000f95190 <bpf_fentry_test1>:
c000000000f95190: 00 00 00 60 nop
c000000000f95194: 01 00 63 38 addi r3,r3,1
c000000000f95198: b4 07 63 7c extsw r3,r3
c000000000f9519c: 20 00 80 4e blr
[1] https://lore.kernel.org/all/20241030070850.1361304-13-hbathini@linux.ibm.com/
Fixes: 23cf7aa539 ("selftests/bpf: Add selftest for fill_link_info")
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241209065720.234344-1-skb99@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2f0791124 ]
Commit f803bcf920 ("selftests/bpf: Prevent client connect before
server bind in test_tc_tunnel.sh") added code that waits for the
netcat server to start before the netcat client attempts to connect to
it. However, not all calls to 'server_listen' were guarded.
This patch adds the existing 'wait_for_port' guard after the remaining
call to 'server_listen'.
Fixes: f803bcf920 ("selftests/bpf: Prevent client connect before server bind in test_tc_tunnel.sh")
Signed-off-by: Marco Leogrande <leogrande@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/r/20241202204530.1143448-1-leogrande@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02bc220dc6 ]
intptr_t and uintptr_t are not big enough types on 32-bit architectures
when printing 64-bit values, resulting to the following incorrect
diagnostic output:
# get_syscall_info.c:209:get_syscall_info:Expected exp_args[2] (3134324433) == info.entry.args[1] (3134324433)
Replace intptr_t and uintptr_t with intmax_t and uintmax_t, respectively.
With this fix, the same test produces more usable diagnostic output:
# get_syscall_info.c:209:get_syscall_info:Expected exp_args[2] (3134324433) == info.entry.args[1] (18446744072548908753)
Link: https://lore.kernel.org/r/20250108170757.GA6723@strace.io
Fixes: b5bb6d3068 ("selftests/seccomp: fix 32-bit build warnings")
Signed-off-by: Dmitry V. Levin <ldv@strace.io>
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e707b07f5 ]
__ktap_test() may be called without the optional third argument which is
an issue for scripts using `set -u` to detect uninitialized variables
and potential bugs.
Fix this optional "directive" argument by either using the third
argument or an empty string.
This is required for the next commit to properly test script execution
control.
Cc: Kees Cook <kees@kernel.org>
Cc: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Fixes: 14571ab1ad ("kselftest: Add new test for detecting unprobed Devicetree devices")
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Link: https://lore.kernel.org/r/20241212174223.389435-7-mic@digikod.net
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2bf66e66d2 ]
Commit c814bf9589 ("powerpc/selftests: Use timersub() for
gettimeofday()"), got the order of arguments to timersub() wrong,
leading to a negative time delta being reported, eg:
test: gettimeofday
tags: git_version:v6.12-rc5-409-gdddf291c3030
time = -3.297781
success: gettimeofday
The correct order is minuend, subtrahend, which in this case is end,
start. Which gives:
test: gettimeofday
tags: git_version:v6.12-rc5-409-gdddf291c3030-dirty
time = 3.300650
success: gettimeofday
Fixes: c814bf9589 ("powerpc/selftests: Use timersub() for gettimeofday()")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241218114347.428108-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
Saket Kumar Bhaskar
Tengda Wu
Viktor Malik
Rafael Aquini
Andrea Righi
Jiayuan Chen
Bharadwaj Raju
Tejun Heo
Miklos Szeredi
Hangbin Liu
Kumar Kartikeya Dwivedi
SeongJae Park
John Hubbard
Stafford Horne
Mikhail Ivanov
Joe Damato
Kevin Brodsky
Jiri Olsa
Jason Xing
Vladimir Vdovin
Koichiro Den
Libo Chen
Matthieu Baerts (NGI0)
Yan Zhai
Liu Ye
Leon Hwang
Ricardo B. Marliere
Masami Hiramatsu (Google)
Mathieu Desnoyers
Jan Stancek
Jakub Kicinski
Pu Lehui
Ba Jing
Marco Leogrande
Mickaël Salaün
Dmitry V. Levin
Geert Uytterhoeven
Song Yoong Siang
Michael Ellerman