commit daedde7f02 upstream.
The re-order in the Fixes commit below displaced vfio_pci_vga_init() as
the last failure point of what is now vfio_pci_core_register_device()
without introducing an unwind for the VGA arbiter registration.
In current kernels this is mostly benign because vfio_pci_set_decode()
only uses pci_dev state, but the original failure path could leave a
callback with a freed vdev cookie. The stale registration also becomes
unsafe again once the callback follows drvdata to the vfio device.
Add the required VGA unwind callout.
Fixes: 4aeec3984d ("vfio/pci: Re-order vfio_pci_probe()")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Alex Williamson <alex.williamson@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20260615191241.688297-3-alex.williamson@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4575e9aac5 upstream.
When disable_idle_d3 was introduced in vfio-pci, it directly manipulated
the device power state with pci_set_power_state(). There were no
refcounts to maintain or balanced operations, we could unconditionally
bring the device to D0 and conditionally move it to D3hot. Therefore
the module parameter was made writable.
Later, in commit c61302aa48 ("vfio/pci: Move module parameters to
vfio_pci.c"), as part of the vfio-pci-core split, the writable aspect
of the module parameter was nullified. The parameter value could still
be changed through sysfs, but the vfio-pci driver latched the values
into vfio-pci-core globals at module init. Loading the vfio-pci module,
or unloading and reloading, with non-default or different values could
change the globals relative to existing devices bound to vfio-pci
variant drivers.
Runtime PM was introduced in commit 7ab5e10eda ("vfio/pci: Move the
unused device into low power state with runtime PM"), which marks the
point where power states became refcounted. PM get and put operations
need to be balanced, but the same module operations noted above can
change the global variables relative to those devices already bound to
vfio-pci variant drivers. This introduces a window where PM operations
can now become unbalanced.
To resolve this with a narrow footprint for stable backports, the
disable_idle_d3 flag is latched into the vfio_pci_core_device at the
time of initialization, such that the device always operates with a
consistent value.
NB. vfio_pci_dev_set_try_reset() now unconditionally raises the
runtime PM usage count around bus reset to account for disable_idle_d3
becoming a per-device rather than global flag. When this flag is set,
the additional get/put pair is harmless and allows continued use of the
shared vfio_pci_dev_set_pm_runtime_get() helper.
Fixes: 7ab5e10eda ("vfio/pci: Move the unused device into low power state with runtime PM")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Alex Williamson <alex.williamson@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20260615191241.688297-2-alex.williamson@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6380957fa2 upstream.
Several mixer quirk callbacks cache the requested
control value in kcontrol->private_value before
issuing a single vendor or class write.
Their paired get and resume paths consume that cache
directly, so a failed write currently leaves software
state changed even though the update did not succeed.
That can make later reads report a value the device
never accepted and can replay the stale cache on resume.
Restore the previous cached value on failure in
the Audigy2NX LED, Emu0204 channel switch,
Xonar U1 output switch, Native Instruments controls,
FTU effect program switch, and Sound Blaster E1 input source switch.
Fixes: 9cf3689bfe ("ALSA: usb-audio: Add audigy2nx resume support")
Fixes: 5f503ee9e2 ("ALSA: usb-audio: Add Emu0204 channel switch resume support")
Fixes: 2bfb14c3b8 ("ALSA: usb-audio: Add Xonar U1 resume support")
Fixes: da6d276957 ("ALSA: usb-audio: Add resume support for Native Instruments controls")
Fixes: 0b4e9cfcef ("ALSA: usb-audio: Add resume support for FTU controls")
Fixes: 388fdb8f88 ("ALSA: usb-audio: Support changing input on Sound Blaster E1")
Cc: stable@vger.kernel.org
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260429-alsa-usb-quirks-cache-rollback-v1-1-01b35c688b80@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7693c0cc41 upstream.
The DualSense jack-detection input handler verifies that a matching input
device belongs to the same physical controller by building kobject path
strings for both the input device and the USB audio device, then comparing
the path prefix.
This was observed when a weak physical connection caused the controller
to rapidly disconnect and reconnect. During that repeated hotplug,
snd_dualsense_ih_match() can run while the controller's USB device is
being disconnected. kobject_get_path() walks ancestor kobjects and
dereferences their names; if the USB device kobject name is no longer
valid, this can fault in strlen():
RIP: 0010:strlen+0x10/0x30
Call Trace:
kobject_get_path+0x34/0x150
snd_dualsense_ih_match+0x49/0xd0 [snd_usb_audio]
input_register_device+0x566/0x6a0
ps_probe+0xb89/0x1590 [hid_playstation]
The same ownership check can be done without building kobject path
strings. The input device is parented below the HID device, USB interface
and USB device, so walking the input device parent chain and comparing
against the mixer USB device preserves the check without dereferencing
kobject names during disconnect.
Fixes: 79d561c4ec ("ALSA: usb-audio: Add mixer quirk for Sony DualSense PS5")
Cc: <stable@vger.kernel.org>
Assisted-by: Cute:gpt-5.5
Signed-off-by: Darvell Long <contact@darvell.me>
Link: https://patch.msgid.link/20260624143723.2986353-1-contact@darvell.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5cff1529a2 upstream.
In capture_urb_complete(), usb_anchor_urb() is called on every
completion callback, but the URB is already anchored from the
initial submission in tascam_trigger_start(). Each redundant call
corrupts the anchor's doubly-linked list and inflates the URB
refcount. When usb_kill_anchored_urbs() traverses the list during
stream stop / suspend / disconnect, the corrupted list leads to
use-after-free.
Remove the redundant usb_anchor_urb() from the resubmit path.
Cc: stable@vger.kernel.org
Fixes: c1bb0c13e4 ("ALSA: usb-audio: us144mkii: Implement audio capture and decoding")
Signed-off-by: WenTao Liang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20260627042949.61767-1-vulab@iscas.ac.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 435990e25b upstream.
snd_seq_event_dup() copies an incoming event into a pool cell and, in
the UMP-enabled build, clears the trailing cell->ump.raw.extra word that
the memcpy() did not cover. The guard deciding whether to clear it
compares the copied size against sizeof(cell->event):
memcpy(&cell->ump, event, size);
if (size < sizeof(cell->event))
cell->ump.raw.extra = 0;
For a legacy (non-UMP) event, size == sizeof(struct snd_seq_event) ==
sizeof(cell->event), so the condition is false and the extra word keeps
stale data. The cell pool is allocated with kvmalloc() (not zeroed) and
cells are reused via a free list, so that word holds uninitialised heap
or leftover event data.
When such a cell is delivered to a UMP client (client->midi_version > 0)
that set SNDRV_SEQ_FILTER_NO_CONVERT -- so the legacy event reaches it
unconverted -- snd_seq_read() reads it out as the larger struct
snd_seq_ump_event and copies the stale word to user space, a 4-byte
kernel heap infoleak to an unprivileged /dev/snd/seq client.
Compare against sizeof(cell->ump) instead, so the trailing word is zeroed
for every event shorter than the UMP cell.
Fixes: 46397622a3 ("ALSA: seq: Add UMP support")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: HyeongJun An <sammiee5311@gmail.com>
Link: https://patch.msgid.link/20260623233841.853326-1-sammiee5311@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2b929b91b0 upstream.
snd_ctl_new1() can return NULL when memory allocation fails. The
ice1712 driver calls snd_ctl_new1() without checking the return value
before dereferencing the pointer in multiple places (ice1712.c,
ice1724.c, aureon.c), which can lead to NULL pointer dereferences.
Add NULL checks after snd_ctl_new1() calls and return -ENOMEM if any
fails.
Assisted-by: Opencode:DeepSeek-V4-Flash
Cc: stable@vger.kernel.org
Fixes: b9a4efd61b ("ALSA: ice1712,ice1724: fix the kcontrol->id initialization")
Signed-off-by: Zhao Dongdong <zhaodongdong@kylinos.cn>
Link: https://patch.msgid.link/tencent_42E5E2AB1B6A5101F7EE8C2117F1F687BB07@qq.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0ec17ee704 upstream.
The HP EliteDesk 800 G5 Mini (PCI subsystem 103c:8595) uses
Cannon Lake PCH cAVS HDA with DisplayPort audio pins 0x05 and
0x06 set to AC_JACK_PORT_NONE (N/A) in BIOS defaults, causing
hdmi_add_pin() to skip them and the DP audio device to not
appear in ALSA.
Add the board to the existing force_connect_list alongside the
similar HP EliteDesk 800 G4 entries.
Signed-off-by: Cameron Graham <cam.graham@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20260612094601.1209845-1-cam.graham@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b65020d539 upstream.
cs35l41_hda creates ALSA controls whose private data points at the
cs35l41_hda object. The firmware load control can also queue
fw_load_work.
Those controls are not removed on component unbind, and device remove
only cancels fw_load_work through cs35l41_remove_dsp(). That helper is
skipped when halo_initialized is false. With firmware_autostart
disabled, a firmware load can be requested before the DSP has been
initialized. If the component or device is removed before the queued
work runs, the worker can run after teardown and dereference driver
state that is no longer valid.
Track the created controls and remove them on unbind so no new control
callback can reach the driver data or queue more work. Then cancel
fw_load_work to drain any request that was already queued. Also cancel
the work unconditionally during device remove before runtime PM teardown.
Fixes: 47ceabd99a ("ALSA: hda: cs35l41: Support Firmware switching and reloading")
Fixes: 4c870513fb ("ALSA: hda: cs35l41: Add read-only ALSA control for forced mute")
Cc: stable@vger.kernel.org
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Reviewed-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260511-alsa-hda-cs35l41-fw-work-teardown-v1-1-1184e9bc4f25@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 29b9667982 upstream.
isight_packet() takes the frame count from the device iso packet and
checks it only against the device claimed iso length.
count = be32_to_cpu(payload->sample_count);
if (likely(count <= (length - 16) / 4))
isight_samples(isight, payload->samples, count);
length is the iso header data_length. It can be up to 0xffff. So the
gate allows a count up to about 16379. isight_samples() then copies
count frames out of payload->samples into the PCM DMA buffer.
payload->samples holds only 2 * MAX_FRAMES_PER_PACKET values. The
device multiplexes two samples per frame. A count past
MAX_FRAMES_PER_PACKET reads past the payload. A count past the buffer
size writes past runtime->dma_area. The smallest PCM buffer is larger
than MAX_FRAMES_PER_PACKET. Bounding the count to MAX_FRAMES_PER_PACKET
keeps both the read and the write in range.
A malicious or faulty Apple iSight on the FireWire bus reaches this
during a normal capture.
Add the MAX_FRAMES_PER_PACKET bound to the gate.
Fixes: 3a691b28a0 ("ALSA: add Apple iSight microphone driver")
Suggested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: stable@vger.kernel.org
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Link: https://patch.msgid.link/178205454729.1900991.7807310178296762772@maoyixie.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4a60127deb upstream.
snd_compr_task_new() allocates the driver task before validating the
returned DMA buffers and reserving file descriptors. When either of
those later steps fails, the core frees its task wrapper and DMA-buffer
references without calling the driver's task_free() callback. Any
driver resources allocated by task_create() are therefore leaked.
The dual-fd allocation path also jumps to cleanup without storing the
negative get_unused_fd_flags() result in retval. Since retval still
contains the successful task_create() return value, TASK_CREATE can
incorrectly report success although the task was discarded.
Preserve the fd allocation errors and call task_free() when failure
occurs after a successful task_create() callback.
Fixes: 04177158cf ("ALSA: compress_offload: introduce accel operation mode")
Fixes: 3d3f43fab4 ("ALSA: compress_offload: improve file descriptors installation for dma-buf")
Cc: stable@vger.kernel.org
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260615-alsa-compress-task-unwind-v1-1-39e8ad3ddb27@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f7f3f9fd81 upstream.
snd_usb_caiaq_tks4_dispatch() decodes the Traktor Kontrol S4 input
stream in fixed 16-byte (TKS4_MSGBLOCK_SIZE) message blocks. On every
iteration it advances buf and subtracts the block size while looping on
"while (len)".
len is urb->actual_length. That value is supplied by the device and is
not guaranteed to be a multiple of 16. When a final short block leaves
len between 1 and 15, the loop runs once more, reads up to buf[15], and
then does "len -= TKS4_MSGBLOCK_SIZE". As len is unsigned this underflows
to a huge value. The loop then keeps iterating and walking buf far past
the end of the 512-byte ep4_in_buf, reading out of bounds until a bogus
block id happens to be hit.
Iterate only while a full message block is available. This stops the
unsigned underflow and silently drops any trailing partial block, which
carries no complete control value anyway.
The sibling endpoint-4 parsers are not affected. The Traktor Kontrol X1
and Maschine arms in snd_usb_caiaq_ep4_reply_dispatch() floor
urb->actual_length before dispatching.
Fixes: 15c5ab6070 ("ALSA: snd-usb-caiaq: Add support for Traktor Kontrol S4")
Cc: stable@vger.kernel.org
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Link: https://patch.msgid.link/178176259547.3343534.2724779296835237429@maoyixie.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c77a6cbb36 upstream.
virtio-snd control handling trusts the device-provided control type and
value count returned by the device.
That metadata is then used directly to index g_v2a_type_map[] in
virtsnd_kctl_info(), and to size loops and memcpy() operations in
virtsnd_kctl_get() and virtsnd_kctl_put() against fixed-size
virtio_snd_ctl_value and snd_ctl_elem_value arrays.
A buggy or malicious device can therefore trigger out-of-bounds access by
advertising an invalid control type or an oversized value count.
Validate control type and count once in virtsnd_kctl_parse_cfg(), before
querying enumerated items or exposing the control to ALSA.
Fixes: d6568e3de4 ("ALSA: virtio: add support for audio controls")
Cc: stable@vger.kernel.org
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260507-alsa-virtio-validate-kctl-info-v1-1-7404fb12ec37@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 83fbbcb793 upstream.
The VirtIO sound UAPI defines VIRTIO_SND_PCM_RATE_384000, and ALSA
has SNDRV_PCM_RATE_384000. However, virtio-snd's rate conversion
tables stop at 192 kHz.
A device advertising only 384 kHz is rejected as having no supported
PCM frame rates. A device advertising 384 kHz together with lower rates
does not expose 384 kHz through the ALSA hardware constraints. The
selected ALSA rate also needs a reverse mapping for SET_PARAMS.
Add the missing 384 kHz entries to both conversion tables.
Fixes: 29b96bf50b ("ALSA: virtio: build PCM devices and substream hardware descriptors")
Fixes: da76e9f3e4 ("ALSA: virtio: PCM substream operators")
Cc: stable@vger.kernel.org
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260515-alsa-virtio-384k-rate-v1-1-35ecb5df835c@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 147996e7e7 upstream.
tascam_disconnect() cancels capture_work and midi_in_work before
usb_kill_anchored_urbs() kills the capture/MIDI-in URBs. Those URBs
self-resubmit, and their completion handlers reschedule the work.
A URB that completes in the small window between cancel_work_sync() and
usb_kill_anchored_urbs() therefore re-arms the work after its only
cancel. Nothing cancels it again before snd_card_free() frees the
card-private tascam structure, so the work handler then runs on freed
memory.
Kill the anchored URBs before cancelling the work; once the work is
cancelled no remaining URB can complete to re-arm it.
Fixes: c1bb0c13e4 ("ALSA: usb-audio: us144mkii: Implement audio capture and decoding")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: HyeongJun An <sammiee5311@gmail.com>
Link: https://patch.msgid.link/20260701095231.1020811-1-sammiee5311@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3c5eed894e upstream.
tmp006_probe() allocates the DRDY trigger with devm_iio_trigger_alloc()
but registers it with plain iio_trigger_register(). The driver has no
.remove() callback, so on module unload the trigger stays in the global
trigger list while its memory is freed by devm, leaving a dangling
entry.
Switch to devm_iio_trigger_register() so the registration is undone in
the same devm scope as the allocation.
Fixes: 91f75ccf9f ("iio: temperature: tmp006: add triggered buffer support")
Cc: stable@vger.kernel.org
Signed-off-by: Stepan Ionichev <sozdayvek@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5cb9fdb446 upstream.
reinit_completion() was called after regmap_write() initiated the hardware
conversion, creating a race window where the interrupt could fire and call
complete() before reinit_completion() reset the completion.
Move reinit_completion() before the regmap_write() to close the race.
ltc2983_eeprom_cmd() already does it in the correct order.
Fixes: f110f3188e ("iio: temperature: Add support for LTC2983")
Signed-off-by: Liviu Stan <liviu.stan@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 434c150752 upstream.
When adi,number-of-wires is absent, n_wires is left at 0. The binding
documents a default of 2 wires, matching the hardware default. However
the current-rotate validation checks n_wires == 2 || n_wires == 3, so
with n_wires = 0 the guard is bypassed and adi,current-rotate is accepted
for a 2-wire RTD.
Initialize n_wires = 2 to match the binding default and ensure the
rotation check fires correctly when the property is absent.
Fixes: f110f3188e ("iio: temperature: Add support for LTC2983")
Signed-off-by: Liviu Stan <liviu.stan@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 63a76e3a58 upstream.
drivers/iio/temperature/Kconfig has a dedicated MLX90635 option, but
the Makefile currently builds mlx90635.o under CONFIG_MLX90632.
This means enabling CONFIG_MLX90635 alone does not carry its provider
object into the build, while enabling CONFIG_MLX90632 unexpectedly also
builds mlx90635.o.
Gate mlx90635.o on the matching generated Kconfig symbol.
Fixes: a1d1ba5e1c ("iio: temperature: mlx90635 MLX90635 IR Temperature sensor")
Cc: stable@vger.kernel.org
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Acked-by: Crt Mori <cmo@melexis.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 70247658d0 upstream.
ad2s1210_trigger_handler() walks several scan-mask branches and uses
"goto error_ret" to land on the iio_trigger_notify_done() teardown at
the bottom of the function for every I/O error -- except the
MOD_CONFIG fault-register read, which uses a bare "return ret":
if (st->fixed_mode == MOD_CONFIG) {
unsigned int reg_val;
ret = regmap_read(st->regmap, AD2S1210_REG_FAULT, ®_val);
if (ret < 0)
return ret;
...
}
Two problems on that path:
- the handler returns a negative errno where the prototype expects
an irqreturn_t (IRQ_HANDLED / IRQ_NONE), so the caller in the
IIO core sees a value outside the enum;
- iio_trigger_notify_done() is skipped, leaving the trigger
busy-flag set. A single transient SPI/regmap error on the fault
read then wedges the trigger so subsequent samples are dropped
until the consumer is detached.
Convert the error path to "goto error_ret" so the failure path goes
through the same notify_done() teardown as every other error in the
handler.
Fixes: f9b9ff95be ("iio: resolver: ad2s1210: add support for adi,fixed-mode")
Signed-off-by: Stepan Ionichev <sozdayvek@gmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit be843b0579 upstream.
vl53l0x_trigger_handler() returns directly on the I2C read failure
paths without calling iio_trigger_notify_done() or vl53l0x_clear_irq().
A single transient i2c_smbus_read_i2c_block_data() failure (negative
errno or a short read) therefore leaves two pieces of state behind:
- iio_trigger_notify_done() never decrements the trigger's use_count,
so iio_trigger_poll_nested() silently drops further dispatches
(see industrialio-trigger.c, the !atomic_read(&trig->use_count)
guard);
- vl53l0x_clear_irq() never writes SYSTEM_INTERRUPT_CLEAR, so the
chip keeps the DRDY interrupt asserted.
The sensor's buffer mode stays wedged from then on, recoverable only
by re-binding the driver. The sibling driver vl53l1x-i2c.c handles
exactly the same case correctly by jumping to a "notify_and_clear_irq"
label that always calls both helpers; mirror that here.
The bogus negative-int return value cast to irqreturn_t also goes
away as a side effect.
Fixes: 762186c6e7 ("iio: proximity: vl53l0x-i2c: Added continuous mode support")
Signed-off-by: Stepan Ionichev <sozdayvek@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fbe67ff37a upstream.
mpl115_read_raw() takes a runtime PM reference with pm_runtime_get_sync()
before reading the processed pressure or raw temperature, but on the read
error path it returns without calling pm_runtime_put_autosuspend(). Each
failed read therefore leaks a runtime PM reference and prevents the device
from autosuspending.
Drop the reference before checking the return value so both the success
and error paths are balanced.
Fixes: 0c3a333524 ("iio: pressure: mpl115: Implementing low power mode by shutdown gpio")
Signed-off-by: Biren Pandya <birenpandya@gmail.com>
Assisted-by: Claude:claude-opus-4-8 coccinelle
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1172160f2a upstream.
bmp580_trigger_handler() builds an on-stack scan buffer containing
two __le32 fields and an aligned_s64 timestamp, and pushes it to
userspace via iio_push_to_buffers_with_ts(). However, only the low
3 bytes of each __le32 field are populated by the device data:
memcpy(&buffer.comp_press, &data->buf[3], 3);
memcpy(&buffer.comp_temp, &data->buf[0], 3);
The high byte of each field is left uninitialised on the stack.
The bmp580 channels declare storagebits = 32, so the IIO core
transports all four bytes per sample to userspace as part of the
scan element, leaking two bytes of kernel stack per scan.
Zero-initialise the buffer before populating it, mirroring the fix
applied to bme280_trigger_handler() in commit 018f50909e ("iio:
bmp280: zero-init buffer").
Fixes: 872c8014e0 ("iio: pressure: bmp280: drop sensor_data array")
Cc: stable@vger.kernel.org
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c52bb33b64 upstream.
The events are registered for IIO_LIGHT and not for IIO_INTENSITY.
Use the correct channel type.
When at it, fix minor checkpatch code style warning (alignment).
Cc: stable@vger.kernel.org
Fixes: 7b779f573c ("iio: light: add driver for veml6030 ambient light sensor")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a00ffd1567 upstream.
When devm_request_threaded_irq() fails, probe logs the error and
then returns -EINVAL, dropping the real error code and breaking the
deferred-probe flow for -EPROBE_DEFER.
Return ret directly; the IRQ subsystem already prints on failure.
Fixes: 2335f0d7c7 ("iio: light: Added AMS tsl2591 driver implementation")
Cc: stable@vger.kernel.org
Signed-off-by: Stepan Ionichev <sozdayvek@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 38b72267b7 upstream.
gp2ap002_read_raw() calls pm_runtime_get_sync() before reading the
lux value, but if gp2ap002_get_lux() fails, it returns directly. This
skips the pm_runtime_put_autosuspend() call at the "out" label,
permanently leaking a runtime PM reference and preventing the device
from autosuspending.
Replace the direct return with a "goto out" to ensure the reference
is properly dropped on the error path.
Fixes: f6dbf83c17 ("iio: light: gp2ap002: Take runtime PM reference on light read")
Signed-off-by: Biren Pandya <birenpandya@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 744bccc264 upstream.
al3320a_read_raw() used to read two adjacent registers
until the driver was modernized using the regmap framework.
That cleanup accidentally replaced the 16-bit word read
with a single byte read. I'm reverting latter.
Fixes: 1850e6ae7f ("iio: light: al3320a: Implement regmap support")
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ee78fae068 upstream.
al3010_read_raw() used to read two adjacent registers
until the driver was modernized using the regmap framework.
That cleanup accidentally replaced the 16-bit word read
with a single byte read. I'm reverting latter.
Fixes: 0e5e21e23d ("iio: light: al3010: Implement regmap support")
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aa411adc6c upstream.
al3010_scales[] encodes the highest gain range as {0, 1187200}.
For IIO_VAL_INT_PLUS_MICRO, the fractional part must be less than
1000000, so the scale 1.1872 should instead be represented as
{ 1, 187200 }.
Since write_raw() compares the value from userspace against this
table, writing the advertised 1.1872 scale never matches the malformed
entry and returns -EINVAL. As a result, the highest gain range cannot
be selected. Reading the scale in that state also reports the malformed
value.
Fixes: c36b5195ab ("iio: light: add Dyna-Image AL3010 driver")
Signed-off-by: Vidhu Sarwal <vidhu.linux@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aede83625f upstream.
As part of driver initialization, e.g. st_lsm6dsx_init_shub() selects
the shub register page using st_lsm6dsx_set_page(). Selecting the shub
register page shadows the regular register space so whoami, among other
registers, is no longer accessible.
In applications where the IMU is permanently powered separately from the
processor, there is a window where a reset of the CPU leaves the IMU in
the shub register page. Once this occurs, any subsequent probe attempt
fails because of the register shadowing.
Using the ism330dlc, the error typically looks like
st_lsm6dsx_i2c 3-006a: unsupported whoami [10]
with the unknown whoami read from a reserved register in the shub page.
The reset register is also shadowed by the page select, preventing a
reset from recovering the chip.
Unconditionally clear the shub page before the whoami readout to ensure
normal register access and allow the initialization to proceed.
Place the fix in st_lsm6dsx_check_whoami() before the whoami check
because hw->settings, which st_lsm6dsx_set_page() relies on, is first
assigned in that function.
Placing the fix in a more logical place than the whoami check would
require a bigger restructuring of the code.
Fixes: c91c1c844e ("iio: imu: st_lsm6dsx: add i2c embedded controller support")
Signed-off-by: Andreas Kempe <andreas.kempe@actia.se>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit affe3f077d upstream.
Timestamps are made by measuring the chip clock using the watermark
interrupts. If we read more than watermark samples as done today, we
are reducing the period between interrupts and distort the time
measurement. Fix that by reading only watermark samples in the
interrupt case.
Fixes: 7f85e42a6c ("iio: imu: inv_icm42600: add buffer support in iio devices")
Cc: stable@vger.kernel.org
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8b0b864c11 upstream.
Clock period value is used for computing periods of sampling. There is
no need for it to be higher than the maximum odr, otherwise we are
losing precision in the computation for nothing.
Switch clock period value to maximum odr period (8kHz).
Fixes: 0ecc363cce ("iio: make invensense timestamp module generic")
Cc: stable@vger.kernel.org
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Williamson
Raghavendra Rao Ananta
Cássio Gabriel
Darvell Long
WenTao Liang
HyeongJun An
Zhao Dongdong
Aaron Erhardt
Huacai Chen
Cameron Graham
Maoyi Xie
Geoffrey D. Bennett
Stepan Ionichev
Liviu Stan
Pengpeng Hou
Biren Pandya
David Carlier
Andy Shevchenko
Javier Carrasco
Joshua Crofts
Alexander A. Klimov
Vidhu Sarwal
Andreas Kempe
Jean-Baptiste Maneyrol