averello/linux-stable-mirror
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2026-07-25 16:19:48 +02:00
Code Issues Packages Projects Releases Wiki Activity
1,383,743 Commits 115 Branches 5,688 Tags
5ca5f00a167cdd28bcfeeae6ddd370b13ac00a2a
Commit Graph
11 Commits
Author SHA1 Message Date
Hal FengandVinod Koul 3f097adb9b phy: starfive: jh7110-usb: Fix USB 2.0 host occasional detection failure 
JH7110 USB 2.0 host fails to detect USB 2.0 devices occasionally. With a
long time of debugging and testing, we found that setting Rx clock gating
control signal to normal power consumption mode can solve this problem.

Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Link: https://lore.kernel.org/r/20250422101244.51686-1-hal.feng@starfivetech.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
 2025-05-14 09:45:12 +01:00
Jan KiszkaandVinod Koul e10c52e7e0 phy: starfive: jh7110-usb: Fix link configuration to controller 
In order to connect the USB 2.0 PHY to its controller, we also need to
set "u0_pdrstn_split_sw_usbpipe_plugen" [1]. Some downstream U-Boot
versions did that, but upstream firmware does not, and the kernel must
not rely on such behavior anyway. Failing to set this left the USB
gadget port invisible to connected hosts behind.

Link: https://doc-en.rvspace.org/JH7110/TRM/JH7110_TRM/sys_syscon.html#sys_syscon__section_b3l_fqs_wsb [1]
Fixes: 16d3a71c20 ("phy: starfive: Add JH7110 USB 2.0 PHY driver")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20241015070444.20972-2-minda.chen@starfivetech.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
 2024-10-17 20:19:44 +05:30
Changhuang LiangandVinod Koul 8d2a353951 phy: starfive: Correct the dphy configure process 
We actually want to calculate the alignment values first, then
use the alignment value to look up the data from reg_configs[].

Fixes: d3ab795533 ("phy: starfive: Add mipi dphy tx support")

Reviewed-by: Shengyang Chen <shengyang.chen@starfivetech.com>
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Link: https://lore.kernel.org/r/20240627020059.163535-1-changhuang.liang@starfivetech.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
 2024-07-02 18:49:14 +05:30
Shengyang ChenandVinod Koul d3ab795533 phy: starfive: Add mipi dphy tx support 
Add mipi dphy tx support for the StarFive JH7110 SoC.
It is a module which is used to receive data from DSI
driver and transfer data to DSI interface like mipi screen.

Signed-off-by: Shengyang Chen <shengyang.chen@starfivetech.com>
Reviewed-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Link: https://lore.kernel.org/r/20240418035020.47876-3-shengyang.chen@starfivetech.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
 2024-06-15 17:38:30 +05:30
Dr. David Alan GilbertandVinod Koul 9d3799c3e8 phy: starfive: remove unused struct 'regval' 
'regval' is unused since the original
commit f8aa660841 ("phy: starfive: Add mipi dphy rx support").

Remove it.

Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Link: https://lore.kernel.org/r/20240527205937.165325-1-linux@treblig.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
 2024-06-03 19:29:01 +05:30
Geert UytterhoevenandVinod Koul e7379477f4 phy: starfive: StarFive PHYs should depend on ARCH_STARFIVE 
The various StarFive PHYs are only present on StarFive SoCs.  Hence add
a dependency on ARCH_STARFIVE, to prevent asking the user about these
drivers when configuring a kernel without StarFive SoC support.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Link: https://lore.kernel.org/r/12097f6107a18e2f7cfb80f47ac7b27808e062c4.1690300076.git.geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>
 2023-07-26 19:09:08 +05:30
Vinod Koul ec6beb8258 phy: starfive: make phys depend on HAS_IOMEM 
the startfive phy drivers use devm_platform_ioremap_resource() which on
some archs (s390) is not present. So make the drivers depend on HAS_IOMEM

Fixes: f8aa660841 ("phy: starfive: Add mipi dphy rx support")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202307250509.oeudxG28-lkp@intel.com/
Reviewed-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20230725063856.482696-1-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
 2023-07-25 19:22:11 +05:30
Changhuang LiangandVinod Koul f8aa660841 phy: starfive: Add mipi dphy rx support 
Add mipi dphy rx support for the StarFive JH7110 SoC. It is used to
transfer CSI camera data.

Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Reviewed-by: Minda Chen <minda.chen@starfivetech.com>
Link: https://lore.kernel.org/r/20230718070803.16660-3-changhuang.liang@starfivetech.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
 2023-07-24 16:13:03 +05:30
Dan CarpenterandVinod Koul 86fe3e9f4c phy: starfive: fix error code in probe 
This is using the wrong pointer, "phy->regs" vs "phy->phy".

Fixes: fd097f48ee ("phy: starfive: Add JH7110 PCIE 2.0 PHY driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/3cc81f2a-efd7-4ef7-ae6b-e38c91efe153@moroto.mountain
Signed-off-by: Vinod Koul <vkoul@kernel.org>
 2023-07-24 15:53:54 +05:30
Minda ChenandVinod Koul fd097f48ee phy: starfive: Add JH7110 PCIE 2.0 PHY driver 
Add Starfive JH7110 SoC PCIe 2.0 PHY driver support.
PCIe 2.0 PHY default connect to PCIe controller.
PCIe PHY can connect to USB 3.0 controller.

Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230629075115.11934-5-minda.chen@starfivetech.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
 2023-07-12 22:27:44 +05:30
Minda ChenandVinod Koul 16d3a71c20 phy: starfive: Add JH7110 USB 2.0 PHY driver 
Add Starfive JH7110 SoC USB 2.0 PHY driver support.
USB 2.0 PHY default connect to Cadence USB controller.

Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230629075115.11934-4-minda.chen@starfivetech.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
 2023-07-12 22:27:44 +05:30