[ Upstream commit b9846a3867 ]
Before ACP firmware loading, DSP interrupts are not expected.
Sometimes after reboot, it's observed that before ACP firmware is loaded
false DSP interrupt is reported.
Registering the interrupt handler before acp initialization causing false
interrupts sometimes on reboot as ACP reset is not applied.
Correct the sequence by invoking acp initialization sequence prior to
registering interrupt handler.
Fixes: 738a2b5e2c ("ASoC: SOF: amd: Add IPC support for ACP IP block")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://msgid.link/r/20240404041717.430545-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c40aad7c81 ]
When the system is suspended while audio is active, the
sof_ipc4_pcm_hw_free() is invoked to reset the pipelines since during
suspend the DSP is turned off, streams will be re-started after resume.
If the firmware crashes during while audio is running (or when we reset
the stream before suspend) then the sof_ipc4_set_multi_pipeline_state()
will fail with IPC error and the state change is interrupted.
This will cause misalignment between the kernel and firmware state on next
DSP boot resulting errors returned by firmware for IPC messages, eventually
failing the audio resume.
On stream close the errors are ignored so the kernel state will be
corrected on the next DSP boot, so the second boot after the DSP panic.
If sof_ipc4_trigger_pipelines() is called from sof_ipc4_pcm_hw_free() then
state parameter is SOF_IPC4_PIPE_RESET and only in this case.
Treat a forced pipeline reset similarly to how we treat a pcm_free by
ignoring error on state sending to allow the kernel's state to be
consistent with the state the firmware will have after the next boot.
Link: https://github.com/thesofproject/sof/issues/8721
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20240213115233.15716-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d7332c4a4f ]
With the change in the widget free logic to power down the cores only
when the scheduler widgets are freed, we need to ensure that the
scheduler widget is freed only after all the widgets associated with the
scheduler are freed. This is to ensure that the secondary core that the
scheduler is scheduled to run on is kept powered on until all widgets
that need them are in use. While this works well for dynamic pipelines,
in the case of static pipelines the current logic does not take this into
account and frees all widgets in the order they occur in the
widget_list. So, modify this to ensure that the scheduler widgets are freed
only after all other types of widgets in the widget_list are freed.
Link: https://github.com/thesofproject/linux/issues/4807
Fixes: 31ed8da1c8 ("ASoC: SOF: sof-audio: Modify logic for enabling/disabling topology cores")
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20240208133432.1688-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c344ef36db upstream.
The current code flow is:
1. snd_hdac_device_register()
2. set parameters needed by the hdac driver
3. request_codec_module()
the hdac driver is probed at this point
During boot the codec drivers are not loaded when the hdac device is
registered, it is going to be probed later when loading the codec module,
which point the parameters are set.
On module remove/insert
rmmod snd_sof_pci_intel_tgl
modprobe snd_sof_pci_intel_tgl
The codec module remains loaded and the driver will be probed when the
hdac device is created right away, before the parameters for the driver
has been configured:
1. snd_hdac_device_register()
the hdac driver is probed at this point
2. set parameters needed by the hdac driver
3. request_codec_module()
will be a NOP as the module is already loaded
Move the snd_hdac_device_register() later, to be done right before
requesting the codec module to make sure that the parameters are all set
before the device is created:
1. set parameters needed by the hdac driver
2. snd_hdac_device_register()
3. request_codec_module()
This way at the hdac driver probe all parameters will be set in all cases.
Link: https://github.com/thesofproject/linux/issues/4731
Fixes: a0575b4add ("ASoC: hdac_hda: Conditionally register dais for HDMI and Analog")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231207095425.19597-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/ZYvUIxtrqBQZbNlC@shine.dominikbrodowski.net
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218304
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 31ed8da1c8 ]
In the current code, we enable a widget core when it is set up and
disable it when it is freed. This is problematic with IPC4 because
widget free is essentially a NOP and all widgets are freed in the
firmware when the pipeline is deleted. This results in a crash during
pipeline deletion when one of it's widgets is scheduled to run on a
secondary core and is powered off when widget is freed. So, change the
logic to enable all cores needed by all the modules in a pipeline when
the pipeline widget is set up and disable them after the pipeline
widget is freed.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231124135743.24674-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba2de401d3 ]
Pass the PCI SSID of the audio interface through to the machine driver.
This allows the machine driver to use the SSID to uniquely identify the
specific hardware configuration and apply any platform-specific
configuration.
struct snd_sof_pdata is passed around inside the SOF code, but it then
passes configuration information to the machine driver through
struct snd_soc_acpi_mach and struct snd_soc_acpi_mach_params. So SSID
information has been added to both snd_sof_pdata and
snd_soc_acpi_mach_params.
PCI does not define 0x0000 as an invalid value so we can't use zero to
indicate that the struct member was not written. Instead a flag is
included to indicate that a value has been written to the
subsystem_vendor and subsystem_device members.
sof_pci_probe() creates the struct snd_sof_pdata. It is passed a struct
pci_dev so it can fill in the SSID value.
sof_machine_check() finds the appropriate struct snd_soc_acpi_mach. It
copies the SSID information across to the struct snd_soc_acpi_mach_params.
This done before calling any custom set_mach_params() so that it could be
used by the set_mach_params() callback to apply variant params.
The machine driver receives the struct snd_soc_acpi_mach as its
platform_data.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230912163207.3498161-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3746284c23 ]
If, for any reason, the open-coded arithmetic causes a wraparound,
the protection that `struct_size()` adds against potential integer
overflows is defeated. Fix this by hardening call to `struct_size()`
with `size_add()`.
Fixes: f9efae9549 ("ASoC: SOF: ipc4-topology: Add support for base config extension")
Signed-off-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/ZQSr15AYJpDpipg6@work
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Setting ACP ACLK as clock source when ACP enters D0 state causing
firmware load failure as mentioned in below scenario.
- Load snd_sof_amd_rembrandt
- Play or Record audio
- Stop audio
- Unload snd_sof_amd_rembrandt
- Reload snd_sof_amd_rembrandt
If acp_clkmux_sel register field is set, then clock source will be
set to ACP ACLK when ACP enters D0 state.
During stream stop, if there is no active stream is running then
acp firmware will set the ACP ACLK value to zero.
When driver is reloaded and clock source is selected as ACP ACLK,
as ACP ACLK is programmed to zero, firmware loading will fail.
For RMB platform, remove the clock mux selection field so that
ACP will use internal clock source when ACP enters D0 state.
Fixes: 41cb85bc4b ("ASoC: SOF: amd: Add support for Rembrandt plaform.")
Reported-by: coolstar <coolstarorganization@gmail.com>
Closes: https://github.com/thesofproject/sof/issues/8137
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230927071412.2416250-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
DSP_SW_INTR_STAT_OFFSET is a common interrupt register which will be
accessed by both ACP firmware and driver. This register contains register
bits corresponds to host to dsp interrupts and vice versa.
when dsp to host interrupt is reported, only clear dsp to host
interrupt bit in DSP_SW_INTR_STAT_OFFSET.
Fixes: 2e7c6652f9 ("ASoC: SOF: amd: Fix for handling spurious interrupts from DSP")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230823073340.2829821-7-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Previously ACP SOF firmware used to enable the ACP external
global interrupt register.
This will restrict to report ACP host interrupts only after
firmware loading is successful.
This register needs to be set from host driver to handle
other ACP interrupts(SoundWire Interrupts) before loading
the ACP firmware.
Add field for external interrupt enable register in acp descriptor
structure and enable the external interrupt enable register.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230823073340.2829821-2-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
During initial development time for RN platform, when SHA
dma gets completed, SHA DMA engine used to raise the ACP interrupt.
In ACP interrupt handler, SHA DMA interrupt got handled.
Currently SHA DMA compleition is verified by checking
transfer count using read poll time out logic.
Remove unused SHA dma interrupt handling code.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230823073340.2829821-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new module parameter ipc4_ignore_cpc which can be used to force the
kernel to ignore the queried CPC value for all firmware modules and use 0
instead.
The CPC lookup is still done to report missing configurations and the
debug print is going to be different to be explicit that the CPC is ignored
and what was the value we would have used.
The CPC value is sent to the firmware with the MOD_INIT_INSTANCE message
and it is used by the firmware as a parameter for clock scaling.
The flag is intended to be used only when there is a need to validate the
firmware behavior regarding to clock scaling since the 0 CPC value will
force the DSP to run in full speed, disabling the scaling and provides
additional counter point to rule out clock management related issues.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20230822065419.24374-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The SRC component in a pipeline provides flexibility on the sampling
rate which was not handled previously. This series will improve the
kernel side with the needed logic to be able to deal with the SRC type
of components in pipelines.
Merge series from Li Zetao <lizetao1@huawei.com>:
This patch set use the helper function devm_kmemdup() to replace
devm_kmalloc + memcpy, which is the same as implementing the function
separately.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
The use of the widget name as a prefix for the kcontrol name is quite
useful in the case of multiple pipelines going to the same endpoint,
but it's overkill in simpler cases.
This patchset extends the existing DAPM code to drop the widget name
prefix and make the kcontrol names simpler when there's no possible
ambiguity, e.g. "gain.2.1 Main Playback Volume" becomes just "Main
Playback Volume".
