commit 6a78699838 upstream.
commit f1be1788a3 ("block: model freeze & enter queue as lock for
supporting lockdep") tries to apply lockdep for verifying freeze &
unfreeze. However, the verification is only done the outmost freeze and
unfreeze. This way is actually not correct because q->mq_freeze_depth
still may drop to zero on other task instead of the freeze owner task.
Fix this issue by always verifying the last unfreeze lock on the owner
task context, and make sure both the outmost freeze & unfreeze are
verified in the current task.
Fixes: f1be1788a3 ("block: model freeze & enter queue as lock for supporting lockdep")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241031133723.303835-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f1be1788a3 ]
Recently we got several deadlock report[1][2][3] caused by
blk_mq_freeze_queue and blk_enter_queue().
Turns out the two are just like acquiring read/write lock, so model them
as read/write lock for supporting lockdep:
1) model q->q_usage_counter as two locks(io and queue lock)
- queue lock covers sync with blk_enter_queue()
- io lock covers sync with bio_enter_queue()
2) make the lockdep class/key as per-queue:
- different subsystem has very different lock use pattern, shared lock
class causes false positive easily
- freeze_queue degrades to no lock in case that disk state becomes DEAD
because bio_enter_queue() won't be blocked any more
- freeze_queue degrades to no lock in case that request queue becomes dying
because blk_enter_queue() won't be blocked any more
3) model blk_mq_freeze_queue() as acquire_exclusive & try_lock
- it is exclusive lock, so dependency with blk_enter_queue() is covered
- it is trylock because blk_mq_freeze_queue() are allowed to run
concurrently
4) model blk_enter_queue() & bio_enter_queue() as acquire_read()
- nested blk_enter_queue() are allowed
- dependency with blk_mq_freeze_queue() is covered
- blk_queue_exit() is often called from other contexts(such as irq), and
it can't be annotated as lock_release(), so simply do it in
blk_enter_queue(), this way still covered cases as many as possible
With lockdep support, such kind of reports may be reported asap and
needn't wait until the real deadlock is triggered.
For example, lockdep report can be triggered in the report[3] with this
patch applied.
[1] occasional block layer hang when setting 'echo noop > /sys/block/sda/queue/scheduler'
https://bugzilla.kernel.org/show_bug.cgi?id=219166
[2] del_gendisk() vs blk_queue_enter() race condition
https://lore.kernel.org/linux-block/20241003085610.GK11458@google.com/
[3] queue_freeze & queue_enter deadlock in scsi
https://lore.kernel.org/linux-block/ZxG38G9BuFdBpBHZ@fedora/T/#u
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241025003722.3630252-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 3802f73bd8 ("block: fix uaf for flush rq while iterating tags")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Merge in 6.11 final to get the fix for preventing deadlocks on an
elevator switch, as there's a fixup for that patch.
* tag 'v6.11': (1788 commits)
Linux 6.11
Revert "KVM: VMX: Always honor guest PAT on CPUs that support self-snoop"
pinctrl: pinctrl-cy8c95x0: Fix regcache
cifs: Fix signature miscalculation
mm: avoid leaving partial pfn mappings around in error case
drm/xe/client: add missing bo locking in show_meminfo()
drm/xe/client: fix deadlock in show_meminfo()
drm/xe/oa: Enable Xe2+ PES disaggregation
drm/xe/display: fix compat IS_DISPLAY_STEP() range end
drm/xe: Fix access_ok check in user_fence_create
drm/xe: Fix possible UAF in guc_exec_queue_process_msg
drm/xe: Remove fence check from send_tlb_invalidation
drm/xe/gt: Remove double include
net: netfilter: move nf flowtable bpf initialization in nf_flow_table_module_init()
PCI: Fix potential deadlock in pcim_intx()
workqueue: Clear worker->pool in the worker thread context
net: tighten bad gso csum offset check in virtio_net_hdr
netlink: specs: mptcp: fix port endianness
net: dpaa: Pad packets to ETH_ZLEN
mptcp: pm: Fix uaf in __timer_delete_sync
...
Pull more block updates from Jens Axboe:
- MD fixes via Song:
- md-cluster fixes (Heming Zhao)
- raid1 fix (Mateusz Jończyk)
- s390/dasd module description (Jeff)
- Series cleaning up and hardening the blk-mq debugfs flag handling
(John, Christoph)
- blk-cgroup cleanup (Xiu)
- Error polled IO attempts if backend doesn't support it (hexue)
- Fix for an sbitmap hang (Yang)
* tag 'for-6.11/block-20240722' of git://git.kernel.dk/linux: (23 commits)
blk-cgroup: move congestion_count to struct blkcg
sbitmap: fix io hung due to race on sbitmap_word::cleared
block: avoid polling configuration errors
block: Catch possible entries missing from rqf_name[]
block: Simplify definition of RQF_NAME()
block: Use enum to define RQF_x bit indexes
block: Catch possible entries missing from cmd_flag_name[]
block: Catch possible entries missing from alloc_policy_name[]
block: Catch possible entries missing from hctx_flag_name[]
block: Catch possible entries missing from hctx_state_name[]
block: Catch possible entries missing from blk_queue_flag_name[]
block: Make QUEUE_FLAG_x as an enum
block: Relocate BLK_MQ_MAX_DEPTH
block: Relocate BLK_MQ_CPU_WORK_BATCH
block: remove QUEUE_FLAG_STOPPED
block: Add missing entry to hctx_flag_name[]
block: Add zone write plugging entry to rqf_name[]
block: Add missing entries from cmd_flag_name[]
s390/dasd: fix error checks in dasd_copy_pair_store()
s390/dasd: add missing MODULE_DESCRIPTION() macros
...
Pull block updates from Jens Axboe:
- NVMe updates via Keith:
- Device initialization memory leak fixes (Keith)
- More constants defined (Weiwen)
- Target debugfs support (Hannes)
- PCIe subsystem reset enhancements (Keith)
- Queue-depth multipath policy (Redhat and PureStorage)
- Implement get_unique_id (Christoph)
- Authentication error fixes (Gaosheng)
- MD updates via Song
- sync_action fix and refactoring (Yu Kuai)
- Various small fixes (Christoph Hellwig, Li Nan, and Ofir Gal, Yu
Kuai, Benjamin Marzinski, Christophe JAILLET, Yang Li)
- Fix loop detach/open race (Gulam)
- Fix lower control limit for blk-throttle (Yu)
- Add module descriptions to various drivers (Jeff)
- Add support for atomic writes for block devices, and statx reporting
for same. Includes SCSI and NVMe (John, Prasad, Alan)
- Add IO priority information to block trace points (Dongliang)
- Various zone improvements and tweaks (Damien)
- mq-deadline tag reservation improvements (Bart)
- Ignore direct reclaim swap writes in writeback throttling (Baokun)
- Block integrity improvements and fixes (Anuj)
- Add basic support for rust based block drivers. Has a dummy null_blk
variant for now (Andreas)
- Series converting driver settings to queue limits, and cleanups and
fixes related to that (Christoph)
- Cleanup for poking too deeply into the bvec internals, in preparation
for DMA mapping API changes (Christoph)
- Various minor tweaks and fixes (Jiapeng, John, Kanchan, Mikulas,
Ming, Zhu, Damien, Christophe, Chaitanya)
* tag 'for-6.11/block-20240710' of git://git.kernel.dk/linux: (206 commits)
floppy: add missing MODULE_DESCRIPTION() macro
loop: add missing MODULE_DESCRIPTION() macro
ublk_drv: add missing MODULE_DESCRIPTION() macro
xen/blkback: add missing MODULE_DESCRIPTION() macro
block/rnbd: Constify struct kobj_type
block: take offset into account in blk_bvec_map_sg again
block: fix get_max_segment_size() warning
loop: Don't bother validating blocksize
virtio_blk: Don't bother validating blocksize
null_blk: Don't bother validating blocksize
block: Validate logical block size in blk_validate_limits()
virtio_blk: Fix default logical block size fallback
nvmet-auth: fix nvmet_auth hash error handling
nvme: implement ->get_unique_id
block: pass a phys_addr_t to get_max_segment_size
block: add a bvec_phys helper
blk-lib: check for kill signal in ioctl BLKZEROOUT
block: limit the Write Zeroes to manually writing zeroes fallback
block: refacto blkdev_issue_zeroout
block: move read-only and supported checks into (__)blkdev_issue_zeroout
...
Some drivers validate that their own logical block size. It is no harm to
always do this, so validate in blk_validate_limits().
This allows us to remove the validation in most of those drivers.
Add a comment to blk_validate_block_size() to inform users that self-
validation of LBS is usually unnecessary.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240708091651.177447-3-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Zeroout can access a significant capacity and take longer than the user
expected. A user may change their mind about wanting to run that
command and attempt to kill the process and do something else with their
device. But since the task is uninterruptable, they have to wait for it
to finish, which could be many hours.
Add a new BLKDEV_ZERO_KILLABLE flag for blkdev_issue_zeroout that checks
for a fatal signal at each iteration so the user doesn't have to wait for
their regretted operation to complete naturally.
Heavily based on an earlier patch from Keith Busch.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240701165219.1571322-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
dma_pad_mask is a queue_limits by all ways of looking at it, so move it
there and set it through the atomic queue limits APIs.
Add a little helper that takes the alignment and pad into account to
simplify the code that is touched a bit.
Note that there never was any need for the > check in
blk_queue_update_dma_pad, this probably was just copy and paste from
dma_update_dma_alignment.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240626142637.300624-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no need to conditionally define on CONFIG_BLK_DEV_ZONED the
inline helper functions bdev_nr_zones(), bdev_max_open_zones(),
bdev_max_active_zones() and disk_zone_no() as these function will return
the correct valu in all cases (zoned device or not, including when
CONFIG_BLK_DEV_ZONED is not set). Furthermore, disk_nr_zones()
definition can be simplified as disk->nr_zones is always 0 for regular
block devices.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240621031506.759397-4-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no need for bdev_nr_zones() to be an exported function
calculating the number of zones of a block device. Instead, given that
all callers use this helper with a fully initialized block device that
has a gendisk, we can redefine this function as an inline helper in
blkdev.h.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240621031506.759397-3-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add atomic write support, as follows:
- add helper functions to get request_queue atomic write limits
- report request_queue atomic write support limits to sysfs and update Doc
- support to safely merge atomic writes
- deal with splitting atomic writes
- misc helper functions
- add a per-request atomic write flag
New request_queue limits are added, as follows:
- atomic_write_hw_max is set by the block driver and is the maximum length
of an atomic write which the device may support. It is not
necessarily a power-of-2.
- atomic_write_max_sectors is derived from atomic_write_hw_max_sectors and
max_hw_sectors. It is always a power-of-2. Atomic writes may be merged,
and atomic_write_max_sectors would be the limit on a merged atomic write
request size. This value is not capped at max_sectors, as the value in
max_sectors can be controlled from userspace, and it would only cause
trouble if userspace could limit atomic_write_unit_max_bytes and the
other atomic write limits.
- atomic_write_hw_unit_{min,max} are set by the block driver and are the
min/max length of an atomic write unit which the device may support. They
both must be a power-of-2. Typically atomic_write_hw_unit_max will hold
the same value as atomic_write_hw_max.
- atomic_write_unit_{min,max} are derived from
atomic_write_hw_unit_{min,max}, max_hw_sectors, and block core limits.
Both min and max values must be a power-of-2.
- atomic_write_hw_boundary is set by the block driver. If non-zero, it
indicates an LBA space boundary at which an atomic write straddles no
longer is atomically executed by the disk. The value must be a
power-of-2. Note that it would be acceptable to enforce a rule that
atomic_write_hw_boundary_sectors is a multiple of
atomic_write_hw_unit_max, but the resultant code would be more
complicated.
All atomic writes limits are by default set 0 to indicate no atomic write
support. Even though it is assumed by Linux that a logical block can always
be atomically written, we ignore this as it is not of particular interest.
Stacked devices are just not supported either for now.
An atomic write must always be submitted to the block driver as part of a
single request. As such, only a single BIO must be submitted to the block
layer for an atomic write. When a single atomic write BIO is submitted, it
cannot be split. As such, atomic_write_unit_{max, min}_bytes are limited
by the maximum guaranteed BIO size which will not be required to be split.
This max size is calculated by request_queue max segments and the number
of bvecs a BIO can fit, BIO_MAX_VECS. Currently we rely on userspace
issuing a write with iovcnt=1 for pwritev2() - as such, we can rely on each
segment containing PAGE_SIZE of data, apart from the first+last, which each
can fit logical block size of data. The first+last will be LBS
length/aligned as we rely on direct IO alignment rules also.
New sysfs files are added to report the following atomic write limits:
- atomic_write_unit_max_bytes - same as atomic_write_unit_max_sectors in
bytes
- atomic_write_unit_min_bytes - same as atomic_write_unit_min_sectors in
bytes
- atomic_write_boundary_bytes - same as atomic_write_hw_boundary_sectors in
bytes
- atomic_write_max_bytes - same as atomic_write_max_sectors in bytes
Atomic writes may only be merged with other atomic writes and only under
the following conditions:
- total resultant request length <= atomic_write_max_bytes
- the merged write does not straddle a boundary
Helper function bdev_can_atomic_write() is added to indicate whether
atomic writes may be issued to a bdev. If a bdev is a partition, the
partition start must be aligned with both atomic_write_unit_min_sectors
and atomic_write_hw_boundary_sectors.
FSes will rely on the block layer to validate that an atomic write BIO
submitted will be of valid size, so add blk_validate_atomic_write_op_size()
for this purpose. Userspace expects an atomic write which is of invalid
size to be rejected with -EINVAL, so add BLK_STS_INVAL for this. Also use
BLK_STS_INVAL for when a BIO needs to be split, as this should mean an
invalid size BIO.
Flag REQ_ATOMIC is used for indicating an atomic write.
Co-developed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20240620125359.2684798-6-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge in queue limits cleanups.
* for-6.11/block-limits:
block: move the raid_partial_stripes_expensive flag into the features field
block: remove the discard_alignment flag
block: move the misaligned flag into the features field
block: renumber and rename the cache disabled flag
block: fix spelling and grammar for in writeback_cache_control.rst
block: remove the unused blk_bounce enum
Merge in last round of queue limits changes from Christoph.
* for-6.11/block-limits: (26 commits)
block: move the bounce flag into the features field
block: move the skip_tagset_quiesce flag to queue_limits
block: move the pci_p2pdma flag to queue_limits
block: move the zone_resetall flag to queue_limits
block: move the zoned flag into the features field
block: move the poll flag to queue_limits
block: move the dax flag to queue_limits
block: move the nowait flag to queue_limits
block: move the synchronous flag to queue_limits
block: move the stable_writes flag to queue_limits
block: move the io_stat flag setting to queue_limits
block: move the add_random flag to queue_limits
block: move the nonrot flag to queue_limits
block: move cache control settings out of queue->flags
block: remove blk_flush_policy
block: freeze the queue in queue_attr_store
nbd: move setting the cache control flags to __nbd_set_size
virtio_blk: remove virtblk_update_cache_mode
loop: fold loop_update_rotational into loop_reconfigure_limits
loop: also use the default block size from an underlying block device
...
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the poll flag into the queue_limits feature field so that it can
be set atomically with the queue frozen.
Stacking drivers are simplified in that they now can simply set the
flag, and blk_stack_limits will clear it when the features is not
supported by any of the underlying devices.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240617060532.127975-22-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the nowait flag into the queue_limits feature field so that it can
be set atomically with the queue frozen.
Stacking drivers are simplified in that they now can simply set the
flag, and blk_stack_limits will clear it when the features is not
supported by any of the underlying devices.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240617060532.127975-20-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the stable_writes flag into the queue_limits feature field so that
it can be set atomically with the queue frozen.
The flag is now inherited by blk_stack_limits, which greatly simplifies
the code in dm, and fixed md which previously did not pass on the flag
set on lower devices.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240617060532.127975-18-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the io_stat flag into the queue_limits feature field so that it can
be set atomically with the queue frozen.
Simplify md and dm to set the flag unconditionally instead of avoiding
setting a simple flag for cases where it already is set by other means,
which is a bit pointless.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240617060532.127975-17-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the add_random flag into the queue_limits feature field so that it
can be set atomically with the queue frozen.
Note that this also removes code from dm to clear the flag based on
the underlying devices, which can't be reached as dm devices will
always start out without the flag set.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240617060532.127975-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the nonrot flag into the queue_limits feature field so that it can
be set atomically with the queue frozen.
Use the chance to switch to defaulting to non-rotational and require
the driver to opt into rotational, which matches the polarity of the
sysfs interface.
For the z2ram, ps3vram, 2x memstick, ubiblock and dcssblk the new
rotational flag is not set as they clearly are not rotational despite
this being a behavior change. There are some other drivers that
unconditionally set the rotational flag to keep the existing behavior
as they arguably can be used on rotational devices even if that is
probably not their main use today (e.g. virtio_blk and drbd).
The flag is automatically inherited in blk_stack_limits matching the
existing behavior in dm and md.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240617060532.127975-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the cache control settings into the queue_limits so that the flags
can be set atomically with the device queue frozen.
Add new features and flags field for the driver set flags, and internal
(usually sysfs-controlled) flags in the block layer. Note that we'll
eventually remove enough field from queue_limits to bring it back to the
previous size.
The disable flag is inverted compared to the previous meaning, which
means it now survives a rescan, similar to the max_sectors and
max_discard_sectors user limits.
The FLUSH and FUA flags are now inherited by blk_stack_limits, which
simplified the code in dm a lot, but also causes a slight behavior
change in that dm-switch and dm-unstripe now advertise a write cache
despite setting num_flush_bios to 0. The I/O path will handle this
gracefully, but as far as I can tell the lack of num_flush_bios
and thus flush support is a pre-existing data integrity bug in those
targets that really needs fixing, after which a non-zero num_flush_bios
should be required in dm for targets that map to underlying devices.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240617060532.127975-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the integrity information into the queue limits so that it can be
set atomically with other queue limits, and that the sysfs changes to
the read_verify and write_generate flags are properly synchronized.
This also allows to provide a more useful helper to stack the integrity
fields, although it still is separate from the main stacking function
as not all stackable devices want to inherit the integrity settings.
Even with that it greatly simplifies the code in md and dm.
Note that the integrity field is moved as-is into the queue limits.
While there are good arguments for removing the separate blk_integrity
structure, this would cause a lot of churn and might better be done at a
later time if desired. However the integrity field in the queue_limits
structure is now unconditional so that various ifdefs can be avoided or
replaced with IS_ENABLED(). Given that tiny size of it that seems like
a worthwhile trade off.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240613084839.1044015-13-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
