Check if watchdog device supports WDIOF_KEEPALIVEPING option before
entering keep_alive() ping test loop. Fix watchdog-test silently looping
if ioctl based ping is not supported by the device. Exit from test in
such case instead of getting stuck in loop executing failing keep_alive()
watchdog_info:
identity: m41t93 rtc Watchdog
firmware_version: 0
Support/Status: Set timeout (in seconds)
Support/Status: Watchdog triggers a management or other external alarm not a reboot
Watchdog card disabled.
Watchdog timeout set to 5 seconds.
Watchdog ping rate set to 2 seconds.
Watchdog card enabled.
WDIOC_KEEPALIVE not supported by this device
without this change
Watchdog card disabled.
Watchdog timeout set to 5 seconds.
Watchdog ping rate set to 2 seconds.
Watchdog card enabled.
Watchdog Ticking Away!
(Where test stuck here forver silently)
Updated change log at commit time:
Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250914152840.GA3047348@bhairav-test.ee.iitb.ac.in
Fixes: d89d08ffd2 ("selftests: watchdog: Fix ioctl SET* error paths to take oneshot exit path")
Signed-off-by: Akhilesh Patil <akhilesh@ee.iitb.ac.in>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Since the PXP start comes after __xe_exec_queue_init() has completed,
we need to cleanup what was done in that function in case of a PXP
start error.
__xe_exec_queue_init calls the submission backend init() function,
so we need to introduce an opposite for that. Unfortunately, while
we already have a fini() function pointer, it performs other
operations in addition to cleaning up what was done by the init().
Therefore, for clarity, the existing fini() has been renamed to
destroy(), while a new fini() has been added to only clean up what was
done by the init(), with the latter being called by the former (via
xe_exec_queue_fini).
Fixes: 72d479601d ("drm/xe/pxp/uapi: Add userspace and LRC support for PXP-using queues")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://lore.kernel.org/r/20250909221240.3711023-3-daniele.ceraolospurio@intel.com
While the GCC and Clang compilers already define __ASSEMBLER__
automatically when compiling assembly code, __ASSEMBLY__ is a
macro that only gets defined by the Makefiles in the kernel.
This can be very confusing when switching between userspace
and kernelspace coding, or when dealing with uapi headers that
rather should use __ASSEMBLER__ instead. So let's standardize on
the __ASSEMBLER__ macro that is provided by the compilers now.
This originally was a completely mechanical patch (done with a
simple "sed -i" statement), with some manual fixups during
rebasing of the patch later.
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: linux-riscv@lists.infradead.org
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20250606070952.498274-3-thuth@redhat.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
The cpupower_write_sysfs() function currently returns -1 on
write failure, but the function signature indicates it should
return an unsigned int. Returning -1 from an unsigned function
results in a large positive value rather than indicating
an error condition.
Fix this by returning 0 on failure, which is more appropriate
for an unsigned return type and maintains consistency with typical
success/failure semantics where 0 indicates failure and non-zero
indicates success (bytes written).
Link: https://lore.kernel.org/r/20250828063000.803229-1-kaushlendra.kumar@intel.com
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Pull perf tools fixes from Namhyung Kim:
"A small set of fixes for crashes in different commands and conditions"
* tag 'perf-tools-fixes-for-v6.17-2025-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf maps: Ensure kmap is set up for all inserts
perf lock: Provide a host_env for session new
perf subcmd: avoid crash in exclude_cmds when excludes is empty
The I2C init for V14_0_2 uses i2c_add_adapter() and i2c_del_adapter(),
this commit replaces the use of these two functions with
devm_i2c_add_adapter(). Notice that V14_0_2 init initializes multiple
I2C buses in a loop; if something goes wrong, the previous adapters are
removed, and the amdgpu load is interrupted. Since I2C init is required
for the correct load of amdgpu, it is safe to rely on
devm_i2c_add_adapter() to handle any previously initialized I2C adapter.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The I2C init for V13_0_6 uses i2c_add_adapter() and i2c_del_adapter(),
this commit replaces the use of these two functions with
devm_i2c_add_adapter(). Notice that V13_0_6 init initializes multiple
I2C buses in a loop; if something goes wrong, the previous adapters are
removed, and the amdgpu load is interrupted. Since I2C init is required
for the correct load of amdgpu, it is safe to rely on
devm_i2c_add_adapter() to handle any previously initialized I2C adapter.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The I2C init for SMU_V13 uses i2c_add_adapter() and i2c_del_adapter(),
this commit replaces the use of these two functions with
devm_i2c_add_adapter(). Notice that SMU_V13 init initializes multiple
I2C buses in a loop; if something goes wrong, the previous adapters are
removed, and the amdgpu load is interrupted. Since I2C init is required
for the correct load of amdgpu, it is safe to rely on
devm_i2c_add_adapter() to handle any previously initialized I2C adapter.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The I2C init for Sienna Cichlid uses i2c_add_adapter() and
i2c_del_adapter(), this commit replaces the use of these two functions
with devm_i2c_add_adapter(). Notice that Sienna Cichlid init initializes
multiple I2C buses in a loop; if something goes wrong, the previous
adapters are removed, and the amdgpu load is interrupted. Since I2C init
is required for the correct load of amdgpu, it is safe to rely on
devm_i2c_add_adapter() to handle any previously initialized I2C adapter.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The I2C init for Navi10 uses i2c_add_adapter() and i2c_del_adapter(),
this commit replaces the use of these two functions with
devm_i2c_add_adapter(). Notice that Navi10 init initializes multiple I2C
buses in a loop; if something goes wrong, the previous adapters are
removed, and the amdgpu load is interrupted. Since I2C init is required
for the correct load of amdgpu, it is safe to rely on
devm_i2c_add_adapter() to handle any previously initialized I2C adapter.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The I2C init for Arcturus uses i2c_add_adapter() and i2c_del_adapter(),
this commit replaces the use of these two functions with
devm_i2c_add_adapter(). Notice that Arcturus init initializes multiple
I2C buses in a loop; if something goes wrong, the previous adapters are
removed, and the amdgpu load is interrupted. Since I2C init is required
for the correct load of amdgpu, it is safe to rely on
devm_i2c_add_adapter() to handle any previously initialized I2C adapter.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of using i2c_add_adapter() and i2c_del_adapter(), replace them
with devm_i2c_add_adapter() to simplify the i2c logic.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of using i2c_add_adapter() and i2c_del_adapter() in the SMU V11,
use devm_i2c_add_adapter() to simplify the code path.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit replaces i2c_add_adapter() with devm_i2c_add_adapter() and
removes part of the cleanup logic since the new function handles the i2c
removal.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit replaces the utilization of i2c_add/del_adapter() with
devm_i2c_add_adapter() to reduce the amount of boilerplate. Using
devm_i2c_add_adapter() has the advantage of removing the manual
manipulation of the I2C adapter.
Suggested-by: Robert Beckett <bob.beckett@collabora.com>
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Documentation/process/deprecated.rst recommends against the use of kmalloc
with dynamic size calculations due to the risk of overflow and smaller
allocation being made than the caller was expecting. This could lead to
buffer overflow in code similar to the memcpy in
amdgpu_dm_plane_add_modifier().
Signed-off-by: James Flowers <bold.zone2373@fastmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
That was actually complete nonsense and not validating the BOs
at all. The code just cleared all VM areas were it couldn't grab the
lock for a BO.
Try to fix this. Only compile tested at the moment.
v2: fix fence slot reservation as well as pointed out by Sunil.
also validate PDs, PTs, per VM BOs and update PDEs
v3: grab the status_lock while working with the done list.
v4: rename functions, add some comments, fix waiting for updates to
complete.
v4: rename amdgpu_vm_lock_done_list(), add some more comments
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Gang submission means that the kernel driver guarantees that multiple
submissions are executed on the HW at the same time on different engines.
Background is that those submissions then depend on each other and each
can't finish stand alone.
SRIOV now uses world switch to preempt submissions on the engines to allow
sharing the HW resources between multiple VFs.
The problem is now that the SRIOV world switch can't know about such inter
dependencies and will cause a timeout if it waits for a partially running
gang submission.
To conclude SRIOV and gang submissions are fundamentally incompatible at
the moment. For now just disable them.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
This series adds handling for vendor-specific UEFI variables from Lenovo
and HP. These vendors will switch to using their UEFI variables instead
of the normal Cirrus Logic-defined mechanisms.
The model of speaker fitted (Speaker ID) is normally signaled by a GPIO,
and the driver is given access to this GPIO. Lenovo and HP will both stop
giving the driver access to the GPIO and instead the BIOS will create a
UEFI variable giving the value of the GPIO.
HP will also start using their own UEFI variable to store amp calibration
data. The content of the variable is the same as the Cirrus Logic variable,
only the UEFI name and GUID are changed.
Change in v2:
Removed unused target_uid variable and code that set it in patch 6.
Richard Fitzgerald (6):
ASoC: cs-amp-lib: Rename defines for Cirrus Logic EFI
ASoC: cs-amp-lib: Add handling for Lenovo and HP UEFI speaker ID
ASoC: cs35l56: Check for vendor-specific speaker ID value
ASoC: cs-amp-lib-test: Add tests for cs_amp_get_vendor_spkid()
ASoC: cs-amp-lib: Add HP-specific EFI variable for calibration data
ASoC: cs-amp-lib-test: Add test for getting cal data from HP EFI
include/sound/cs-amp-lib.h | 1 +
sound/soc/codecs/cs-amp-lib-test.c | 252 ++++++++++++++++++++++++++++-
sound/soc/codecs/cs-amp-lib.c | 139 +++++++++++++++-
sound/soc/codecs/cs35l56-shared.c | 12 +-
4 files changed, 395 insertions(+), 9 deletions(-)
--
2.39.5
Merge series from Alexey Klimov <alexey.klimov@linaro.org>:
PMICs like PM4125 have in-built audio codec IC. The series here
adds support for this codec driver: DT bindings and codec driver
itself that consists mainly of two parts: soundwire devices and
codec part itself.
This audio codec can be found on platforms like QCM2290 and
on Qualcomm QRB2210 RB1 board.
We are working on this together with Srini
(srinivas.kandagatla@oss.qualcomm.com or srini@kernel.org).
This driver also has a bit limited support for concurrent playback,
since line out path is connected to left input channel.
There's another issue with aci.lock and previous patch uncovers it.
aci.lock is being destroyed during removing ixgbe while some of the
ixgbe closing routines are still ongoing. These routines use Admin
Command Interface which require taking aci.lock which has been already
destroyed what leads to call trace.
[ +0.000004] DEBUG_LOCKS_WARN_ON(lock->magic != lock)
[ +0.000007] WARNING: CPU: 12 PID: 10277 at kernel/locking/mutex.c:155 mutex_lock+0x5f/0x70
[ +0.000002] Call Trace:
[ +0.000003] <TASK>
[ +0.000006] ixgbe_aci_send_cmd+0xc8/0x220 [ixgbe]
[ +0.000049] ? try_to_wake_up+0x29d/0x5d0
[ +0.000009] ixgbe_disable_rx_e610+0xc4/0x110 [ixgbe]
[ +0.000032] ixgbe_disable_rx+0x3d/0x200 [ixgbe]
[ +0.000027] ixgbe_down+0x102/0x3b0 [ixgbe]
[ +0.000031] ixgbe_close_suspend+0x28/0x90 [ixgbe]
[ +0.000028] ixgbe_close+0xfb/0x100 [ixgbe]
[ +0.000025] __dev_close_many+0xae/0x220
[ +0.000005] dev_close_many+0xc2/0x1a0
[ +0.000004] ? kernfs_should_drain_open_files+0x2a/0x40
[ +0.000005] unregister_netdevice_many_notify+0x204/0xb00
[ +0.000006] ? __kernfs_remove.part.0+0x109/0x210
[ +0.000006] ? kobj_kset_leave+0x4b/0x70
[ +0.000008] unregister_netdevice_queue+0xf6/0x130
[ +0.000006] unregister_netdev+0x1c/0x40
[ +0.000005] ixgbe_remove+0x216/0x290 [ixgbe]
[ +0.000021] pci_device_remove+0x42/0xb0
[ +0.000007] device_release_driver_internal+0x19c/0x200
[ +0.000008] driver_detach+0x48/0x90
[ +0.000003] bus_remove_driver+0x6d/0xf0
[ +0.000006] pci_unregister_driver+0x2e/0xb0
[ +0.000005] ixgbe_exit_module+0x1c/0xc80 [ixgbe]
Same as for the previous commit, the issue has been highlighted by the
commit 337369f8ce ("locking/mutex: Add MUTEX_WARN_ON() into fast path").
Move destroying aci.lock to the end of ixgbe_remove(), as this
simply fixes the issue.
Fixes: 4600cdf9f5 ("ixgbe: Enable link management in E610 device")
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently aci.lock is initialized too late. A bunch of ACI callbacks
using the lock are called prior it's initialized.
Commit 337369f8ce ("locking/mutex: Add MUTEX_WARN_ON() into fast path")
highlights that issue what results in call trace.
[ 4.092899] DEBUG_LOCKS_WARN_ON(lock->magic != lock)
[ 4.092910] WARNING: CPU: 0 PID: 578 at kernel/locking/mutex.c:154 mutex_lock+0x6d/0x80
[ 4.098757] Call Trace:
[ 4.098847] <TASK>
[ 4.098922] ixgbe_aci_send_cmd+0x8c/0x1e0 [ixgbe]
[ 4.099108] ? hrtimer_try_to_cancel+0x18/0x110
[ 4.099277] ixgbe_aci_get_fw_ver+0x52/0xa0 [ixgbe]
[ 4.099460] ixgbe_check_fw_error+0x1fc/0x2f0 [ixgbe]
[ 4.099650] ? usleep_range_state+0x69/0xd0
[ 4.099811] ? usleep_range_state+0x8c/0xd0
[ 4.099964] ixgbe_probe+0x3b0/0x12d0 [ixgbe]
[ 4.100132] local_pci_probe+0x43/0xa0
[ 4.100267] work_for_cpu_fn+0x13/0x20
[ 4.101647] </TASK>
Move aci.lock mutex initialization to ixgbe_sw_init() before any ACI
command is sent. Along with that move also related SWFW semaphore in
order to reduce size of ixgbe_probe() and that way all locks are
initialized in ixgbe_sw_init().
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Fixes: 4600cdf9f5 ("ixgbe: Enable link management in E610 device")
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
i40e has a feature which writes to memory location last descriptor
successfully sent. Memory barrier in i40e_clean_tx_irq() was used to
avoid forward-reading descriptor fields in case DD bit was not set.
Having mentioned feature in place implies that such situation will not
happen as we know in advance how many descriptors HW has dealt with.
Besides, this barrier placement was wrong. Idea is to have this
protection *after* reading DD bit from HW descriptor, not before.
Digging through git history showed me that indeed barrier was before DD
bit check, anyways the commit introducing i40e_get_head() should have
wiped it out altogether.
Also, there was one commit doing s/read_barrier_depends/smp_rmb when get
head feature was already in place, but it was only theoretical based on
ixgbe experiences, which is different in these terms as that driver has
to read DD bit from HW descriptor.
Fixes: 1943d8ba95 ("i40e/i40evf: enable hardware feature head write back")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ice_put_rx_mbuf() function handles calling ice_put_rx_buf() for each
buffer in the current frame. This function was introduced as part of
handling multi-buffer XDP support in the ice driver.
It works by iterating over the buffers from first_desc up to 1 plus the
total number of fragments in the frame, cached from before the XDP program
was executed.
If the hardware posts a descriptor with a size of 0, the logic used in
ice_put_rx_mbuf() breaks. Such descriptors get skipped and don't get added
as fragments in ice_add_xdp_frag. Since the buffer isn't counted as a
fragment, we do not iterate over it in ice_put_rx_mbuf(), and thus we don't
call ice_put_rx_buf().
Because we don't call ice_put_rx_buf(), we don't attempt to re-use the
page or free it. This leaves a stale page in the ring, as we don't
increment next_to_alloc.
The ice_reuse_rx_page() assumes that the next_to_alloc has been incremented
properly, and that it always points to a buffer with a NULL page. Since
this function doesn't check, it will happily recycle a page over the top
of the next_to_alloc buffer, losing track of the old page.
Note that this leak only occurs for multi-buffer frames. The
ice_put_rx_mbuf() function always handles at least one buffer, so a
single-buffer frame will always get handled correctly. It is not clear
precisely why the hardware hands us descriptors with a size of 0 sometimes,
but it happens somewhat regularly with "jumbo frames" used by 9K MTU.
To fix ice_put_rx_mbuf(), we need to make sure to call ice_put_rx_buf() on
all buffers between first_desc and next_to_clean. Borrow the logic of a
similar function in i40e used for this same purpose. Use the same logic
also in ice_get_pgcnts().
Instead of iterating over just the number of fragments, use a loop which
iterates until the current index reaches to the next_to_clean element just
past the current frame. Unlike i40e, the ice_put_rx_mbuf() function does
call ice_put_rx_buf() on the last buffer of the frame indicating the end of
packet.
For non-linear (multi-buffer) frames, we need to take care when adjusting
the pagecnt_bias. An XDP program might release fragments from the tail of
the frame, in which case that fragment page is already released. Only
update the pagecnt_bias for the first descriptor and fragments still
remaining post-XDP program. Take care to only access the shared info for
fragmented buffers, as this avoids a significant cache miss.
The xdp_xmit value only needs to be updated if an XDP program is run, and
only once per packet. Drop the xdp_xmit pointer argument from
ice_put_rx_mbuf(). Instead, set xdp_xmit in the ice_clean_rx_irq() function
directly. This avoids needing to pass the argument and avoids an extra
bit-wise OR for each buffer in the frame.
Move the increment of the ntc local variable to ensure its updated *before*
all calls to ice_get_pgcnts() or ice_put_rx_mbuf(), as the loop logic
requires the index of the element just after the current frame.
Now that we use an index pointer in the ring to identify the packet, we no
longer need to track or cache the number of fragments in the rx_ring.
Cc: Christoph Petrausch <christoph.petrausch@deepl.com>
Cc: Jesper Dangaard Brouer <hawk@kernel.org>
Reported-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Closes: https://lore.kernel.org/netdev/CAK8fFZ4hY6GUJNENz3wY9jaYLZXGfpr7dnZxzGMYoE44caRbgw@mail.gmail.com/
Fixes: 743bbd93cf ("ice: put Rx buffers after being done with current frame")
Tested-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Tested-by: Priya Singh <priyax.singh@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
uprobe_warn() is passed a task structure, yet its using current. For
the most part this shouldn't matter, but since a task structure is
provided, lets use it.
Fixes: 248d3a7b2f ("uprobes: Change uprobe_copy_process() to dup return_instances")
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Ret probes work by changing the value in the link register at
the probe location to return to the probe rather than the calling
routine. Thus the GCS needs to be updated with this address as well.
Since its possible to insert probes at locations where the
current value of the LR doesn't match the GCS state this needs
to be detected and handled in order to maintain the existing
no-fault behavior.
Co-developed-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
[will: Add '__force' to gcspr casts in arch_uretprobe_hijack_return_addr()]
Signed-off-by: Will Deacon <will@kernel.org>
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This patch adds a new WQ_PERCPU flag to explicitly request the use of
the per-CPU behavior. Both flags coexist for one release cycle to allow
callers to transition their calls.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
All existing users have been updated accordingly.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The arm64 probe simulation doesn't currently have logic in place
to deal with GCS and this results in core dumps if probes are inserted
at control flow locations. Fix-up bl, blr and ret to manipulate the
shadow stack as needed.
While we manipulate and validate the shadow stack correctly, the
hardware provides additional security by only allowing GCS operations
against pages which are marked to support GCS. For writing there is
gcssttr() which enforces this, but there isn't an equivalent for
reading. This means that uprobe users should be aware that probing on
control flow instructions which require reading the shadow stack (ex:
ret) offers lower security guarantees than what is achieved without
the uprobe active.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Uprobes need more advanced read, push, and pop userspace GCS
functionality. Implement those features using the existing gcsstr()
and copy_from_user().
Its important to note that GCS pages can be read by normal
instructions, but the hardware validates that pages used by GCS
specific operations, have a GCS privilege set. We aren't validating this
in load_user_gcs because it requires stabilizing the VMA over the read
which may fault.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
[will: Add '__force' to gcspr cast in pop_user_gcs()]
Signed-off-by: Will Deacon <will@kernel.org>
Empty stubs are defined in processor.h for some functions provided by
the ACPI processor idle driver, but those functions are only used in
the main ACPI processor driver which requires the ACPI processor idle
driver to be present (selecting CONFIG_ACPI_PROCESSOR causes
CONFIG_ACPI_PROCESSOR_IDLE to be selected too automatically).
This means that the empty stubs in question are not really necessary and
if both CONFIG_ACPI_PROCESSOR and CONFIG_ACPI_PROCESSOR_IDLE are unset,
the compiler complains that they are defined, but not used. Drop them
to get rid of the compiler warning.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Link: https://patch.msgid.link/20250911112408.1668431-2-lihuisong@huawei.com
[ rjw: Subject and changelog rewrite ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Alexander Lobakin
Nai-Chen Cheng
Akhilesh Patil
Daniele Ceraolo Spurio
Chunyan Zhang
Alexandre Ghiti
Nam Cao
Thomas Huth
Yunhui Cui
Kaushlendra Kumar
Linus Torvalds
Mario Limonciello
Christian König
Asad Kamal
Rodrigo Siqueira
James Flowers
Mark Brown
Kohei Enju
Jedrzej Jagielski
Maciej Fijalkowski
Jacob Keller
Jeremy Linton
Marco Crivellari
Huisong Li