Set MT_WF_RFCR_DROP_OTHER_UC by default and disable this flag in
mt7996_set_monitor only if monitor mode is enabled.
Without this patch, the MT_WF_RFCR_DROP_OTHER_UC would not be set so the
driver would receive lots of packets meant for other devices.
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Link: https://patch.msgid.link/20250915075910.47558-10-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Port latest version of similar changes from mt7915:
- use reconfig_complete to restart mac_work / queues
- clear wcid and vif mask to avoid leak
- fix sta poll list corruption
- reset station links
- reset interface links
- clear rro list
Link: https://patch.msgid.link/20250915075910.47558-2-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Condition guards are found to be redundant, as the call flow is properly
managed now, as also observed in the Exynos5433 DECON driver. Since
state checking is no longer necessary, remove it.
This also fixes an issue which prevented decon_commit() from
decon_atomic_enable() due to an incorrect state change setting.
Fixes: 96976c3d9a ("drm/exynos: Add DECON driver")
Cc: stable@vger.kernel.org
Suggested-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Similar to FIMD and Exynos5433's DECON, the Exynos7 DECON hardware:
- May optionally require an IOMMU to initialize a display region.
- Outputs image data to another block, say an MIC or a DSI master.
If an IOMMU is present, it may also require to access the reserved
framebuffer region.
Document these bindings in the devicetree schema.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The logic for allocating ppc64_stub_entry trampolines in the .stubs
section relies on an inline sentinel, where a NULL .funcdata member
indicates an available slot.
While preceding commits fixed the initialization bugs that led to ftrace
stub corruption, the sentinel-based approach remains fragile: it depends
on an implicit convention between subsystems modifying different
struct types in the same memory area.
Replace the sentinel with an explicit counter, module->arch.num_stubs.
Instead of iterating through memory to find a NULL marker, the module
loader uses this counter as the boundary for the next free slot.
This simplifies the allocation code, hardens it against future changes
to stub structures, and removes the need for an extra relocation slot
previously reserved to terminate the sentinel search.
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Naveen N Rao (AMD) <naveen@kernel.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250912142740.3581368-4-joe.lawrence@redhat.com
CONFIG_PPC_FTRACE_OUT_OF_LINE introduced setup_ftrace_ool_stubs() to
extend the ppc64le module .stubs section with an array of
ftrace_ool_stub structures for each patchable function.
Fix its ppc64_stub_entry stub reservation loop to properly write across
all of the num_stubs used and not just the first entry.
Fixes: eec37961a5 ("powerpc64/ftrace: Move ftrace sequence out of line")
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Naveen N Rao (AMD) <naveen@kernel.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250912142740.3581368-3-joe.lawrence@redhat.com
When an ftrace call site is converted to a NOP, its corresponding
dyn_ftrace record should have its ftrace_ops pointer set to
ftrace_nop_ops.
Correct the powerpc implementation to ensure the
ftrace_rec_set_nop_ops() helper is called on all successful NOP
initialization paths. This ensures all ftrace records are consistent
before being handled by the ftrace core.
Fixes: eec37961a5 ("powerpc64/ftrace: Move ftrace sequence out of line")
Suggested-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Naveen N Rao (AMD) <naveen@kernel.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250912142740.3581368-2-joe.lawrence@redhat.com
Add support for Exynos7870's DSIM IP block in the bridge driver.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Add compatible string for Exynos7870 DSIM bridge controller. The
device requires four clock sources, in schema they're named as "bus",
"pll", "byte", and "esc".
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Presently, all devices refer to clock names from a single array. The
only controlling parameter is the number of clocks (num_clks field of
samsung_dsim_driver_data) which uses the first n clocks of that array.
As new devices are added, this approach turns out to be cumbersome.
Separate the clock names in individual arrays required by each variant,
in a struct clk_bulk_data. Add a pointer field to the driver data struct
which points to their respective clock names, and rework the clock usage
code to use the clk_bulk_* API instead.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Exynos7870's DSIM requires more time to stabilize its PLL. The current
timeout value, 1000, doesn't suffice. Increase the value to 3000, which
is just about enough as observed experimentally.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The PLL_STABLE bit of DSIM_DPHY_STATUS is hardcoded to BIT(31), but
Exynos7870's DSIM has it in BIT(24) as per downstream kernel sources.
In order to support both, move this bit value to the driver data struct
and define it for every driver compatible. Reference the value from
there instead, in functions wherever required.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Currently, PLL_P offset of DSIM_PLLCTRL is configurable in the driver
data, while PLL_M and PLL_S offsets are hardcoded as 4-bit and 1-bit
offsets respectively, but Exynos7870's DSIM have them at 3-bit and 0-bit
offsets as per downstream kernel sources.
In order to support both, move both offset values to the driver data
struct and define it for every driver compatible. Reference the values
from there instead, in functions wherever required.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The VIDEO_MODE bit of DSIM_CONFIG is hardcoded to BIT(25), but
Exynos7870's DSIM has it in BIT(18) as per downstream kernel sources.
In order to support both, move this bit value to the driver data struct
and define it for every driver compatible. Reference the value from
there instead, in functions wherever required.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The MAIN_VSA offset of DSIM_MSYNC is hardcoded to a 22-bit offset, but
Exynos7870's DSIM has it in a 16-bit offset as per the downstream kernel
sources.
In order to support both, move this offset value to the driver data
struct and define it for every driver compatible. Reference the value
from there instead, in functions wherever required.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
DSIM_CLKCTRL bit and offset values hardcoded in the driver:
name | bit/offset value
--------------------------+-----------------
DSIM_LANE_ESC_CLK_EN_CLK | 19
DSIM_LANE_ESC_CLK_EN_DATA | 20
DSIM_BYTE_CLKEN | 24
DSIM_ESC_CLKEN | 28
DSIM_TX_REQUEST_HSCLK | 31
DSIM_CLKCTRL bit and offset values in Exynos7870 DSIM as per downstream
kernel sources:
name | bit/offset value
--------------------------+-----------------
DSIM_LANE_ESC_CLK_EN_CLK | 8
DSIM_LANE_ESC_CLK_EN_DATA | 9
DSIM_BYTE_CLKEN | 17
DSIM_ESC_CLKEN | 16
DSIM_TX_REQUEST_HSCLK | 20
In order to support both, move all values to the driver data struct and
define it for every driver compatible. Reference the values from there
instead, in functions wherever required.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Exynos7870's DSIM device doesn't require waiting for the header FIFO
during a MIPI DSI transfer. Add a flag in the driver data in order to
control said behavior.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com
On Exynos7870 devices, enabling the display requires disabling
standby by writing to the SFRCTRL register. Add the register and related
bit values. Since this behavior isn't available on other SoCs, implement
a flag in the driver data struct indicating the availability of this
feature.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Exynos7870's DSIM has separate registers for LINK and DPHY status. This
is in contrast to older variants in the driver which use a single
register for both.
Add a driver data flag which indicates that the device variant supports
the legacy status register. Change the register read calls
appropriately.
Suggested-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Configure mbm_event mode on AMD platforms. On AMD platforms, it is
recommended to use the mbm_event mode, if supported, to prevent the
hardware from resetting counters between reads. This can result in
misleading values or display "Unavailable" if no counter is assigned
to the event.
Enable mbm_event mode, known as ABMC (Assignable Bandwidth Monitoring
Counters) on AMD, by default if the system supports it.
Update ABMC across all logical processors within the resctrl domain to
ensure proper functionality.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
Resctrl subsystem can support two monitoring modes, "mbm_event" or "default".
In mbm_event mode, monitoring event can only accumulate data while it is
backed by a hardware counter. In "default" mode, resctrl assumes there is
a hardware counter for each event within every CTRL_MON and MON group.
Introduce mbm_assign_mode resctrl file to switch between mbm_event and default
modes.
Example:
To list the MBM monitor modes supported:
$ cat /sys/fs/resctrl/info/L3_MON/mbm_assign_mode
[mbm_event]
default
To enable the "mbm_event" counter assignment mode:
$ echo "mbm_event" > /sys/fs/resctrl/info/L3_MON/mbm_assign_mode
To enable the "default" monitoring mode:
$ echo "default" > /sys/fs/resctrl/info/L3_MON/mbm_assign_mode
Reset MBM event counters automatically as part of changing the mode. Clear
both architectural and non-architectural event states to prevent overflow
conditions during the next event read. Clear assignable counter configuration
on all the domains. Also, enable auto assignment when switching to "mbm_event"
mode.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
The BMEC (Bandwidth Monitoring Event Configuration) feature enables per-domain
event configuration. With BMEC the MBM events are configured using the
mbm_total_bytes_config or mbm_local_bytes_config files in
/sys/fs/resctrl/info/L3_MON/
and the per-domain event configuration affects all monitor resource groups.
The mbm_event counter assignment mode enables counters to be assigned to RMID
(i.e. a monitor resource group), event pairs, with potentially unique event
configurations associated with every counter.
There may be systems that support both BMEC and mbm_event counter assignment
mode, but resctrl supporting both concurrently will present a conflicting
interface to the user with both per-domain and per RMID, event configurations
active at the same time.
The mbm_event counter assignment provides most flexibility to user space
and aligns with Arm's counter support. On systems that support both,
disable BMEC event configuration when mbm_event mode is enabled by hiding
the mbm_total_bytes_config or mbm_local_bytes_config files when mbm_event
mode is enabled. Ensure mon_features always displays accurate information
about monitor features.
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
Enable the mbm_l3_assignments resctrl file to be used to modify counter
assignments of CTRL_MON and MON groups when the "mbm_event" counter
assignment mode is enabled.
Process the assignment modifications in the following format:
<Event>:<Domain id>=<Assignment state>;<Domain id>=<Assignment state>
Event: A valid MBM event in the
/sys/fs/resctrl/info/L3_MON/event_configs directory.
Domain ID: A valid domain ID. When writing, '*' applies the changes
to all domains.
Assignment states:
_ : Unassign a counter.
e : Assign a counter exclusively.
Examples:
$ cd /sys/fs/resctrl
$ cat /sys/fs/resctrl/mbm_L3_assignments
mbm_total_bytes:0=e;1=e
mbm_local_bytes:0=e;1=e
To unassign the counter associated with the mbm_total_bytes event on
domain 0:
$ echo "mbm_total_bytes:0=_" > mbm_L3_assignments
$ cat /sys/fs/resctrl/mbm_L3_assignments
mbm_total_bytes:0=_;1=e
mbm_local_bytes:0=e;1=e
To unassign the counter associated with the mbm_total_bytes event on
all the domains:
$ echo "mbm_total_bytes:*=_" > mbm_L3_assignments
$ cat /sys/fs/resctrl/mbm_L3_assignments
mbm_total_bytes:0=_;1=_
mbm_local_bytes:0=e;1=e
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
Introduce the mbm_L3_assignments resctrl file associated with CTRL_MON and MON
resource groups to display the counter assignment states of the resource group
when "mbm_event" counter assignment mode is enabled.
Display the list in the following format:
<Event>:<Domain id>=<Assignment state>;<Domain id>=<Assignment state>
Event: A valid MBM event listed in
/sys/fs/resctrl/info/L3_MON/event_configs directory.
Domain ID: A valid domain ID.
The assignment state can be one of the following:
_ : No counter assigned.
e : Counter assigned exclusively.
Example:
To list the assignment states for the default group
$ cd /sys/fs/resctrl
$ cat /sys/fs/resctrl/mbm_L3_assignments
mbm_total_bytes:0=e;1=e
mbm_local_bytes:0=e;1=e
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
Resctrl provides a user-configurable option mbm_assign_on_mkdir that
determines if a counter will automatically be assigned to an RMID, event pair
when its associated monitor group is created via mkdir.
Enable mbm_assign_on_mkdir by default to automatically assign counters to
the two default events (MBM total and MBM local) of a new monitoring group
created via mkdir. This maintains backward compatibility with original
resctrl support for these two events.
Unassign and free counters belonging to a monitoring group when the group
is deleted.
Monitor group creation does not fail if a counter cannot be assigned to one or
both events. There may be limited counters and users have the flexibility to
modify counter assignments at a later time. Log the error message "Failed to
allocate counter for <event> in domain <id>" in
/sys/fs/resctrl/info/last_cmd_status when a new monitoring group is created
but counter assignment failed.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
The "mbm_event" counter assignment mode allows users to assign a hardware
counter to an RMID, event pair and monitor the bandwidth as long as it is
assigned.
Introduce a user-configurable option that determines if a counter will
automatically be assigned to an RMID, event pair when its associated
monitor group is created via mkdir. Accessible when "mbm_event" counter
assignment mode is enabled.
Suggested-by: Peter Newman <peternewman@google.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
When "mbm_event" counter assignment mode is enabled, users can modify the
event configuration by writing to the 'event_filter' resctrl file. The event
configurations for mbm_event mode are located in
/sys/fs/resctrl/info/L3_MON/event_configs/.
Update the assignments of all CTRL_MON and MON resource groups when the event
configuration is modified.
Example:
$ mount -t resctrl resctrl /sys/fs/resctrl
$ cd /sys/fs/resctrl/
$ cat info/L3_MON/event_configs/mbm_local_bytes/event_filter
local_reads,local_non_temporal_writes,local_reads_slow_memory
$ echo "local_reads,local_non_temporal_writes" >
info/L3_MON/event_configs/mbm_total_bytes/event_filter
$ cat info/L3_MON/event_configs/mbm_total_bytes/event_filter
local_reads,local_non_temporal_writes
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
The "mbm_event" counter assignment mode allows the user to assign a hardware
counter to an RMID, event pair and monitor the bandwidth as long as it is
assigned. The user can specify the memory transaction(s) for the counter to
track.
When this mode is supported, the /sys/fs/resctrl/info/L3_MON/event_configs
directory contains a sub-directory for each MBM event that can be assigned to
a counter. The MBM event sub-directory contains a file named "event_filter"
that is used to view and modify which memory transactions the MBM event is
configured with.
Create /sys/fs/resctrl/info/L3_MON/event_configs directory on resctrl mount
and pre-populate it with directories for the two existing MBM events:
mbm_total_bytes and mbm_local_bytes. Create the "event_filter" file within
each MBM event directory with the needed *show() that displays the memory
transactions with which the MBM event is configured.
Example:
$ mount -t resctrl resctrl /sys/fs/resctrl
$ cd /sys/fs/resctrl/
$ cat info/L3_MON/event_configs/mbm_total_bytes/event_filter
local_reads,remote_reads,local_non_temporal_writes,
remote_non_temporal_writes,local_reads_slow_memory,
remote_reads_slow_memory,dirty_victim_writes_all
$ cat info/L3_MON/event_configs/mbm_local_bytes/event_filter
local_reads,local_non_temporal_writes,local_reads_slow_memory
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
When "mbm_event" counter assignment mode is enabled, the architecture requires
a counter ID to read the event data.
Introduce an is_mbm_cntr field in struct rmid_read to indicate whether counter
assignment mode is in use.
Update the logic to call resctrl_arch_cntr_read() and resctrl_arch_reset_cntr()
when the assignment mode is active. Report 'Unassigned' in case the user attempts
to read an event without assigning a hardware counter.
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
When Linux is booted at EL1, host_data_ptr() resolves to the nVHE
hypervisor's copy of host data. When hyp mode isn't available for
KVM the nVHE percpu bases remain uninitialized. Consequently, any usage
of host_data_ptr() will result in a NULL dereference which has been
observed in KVM's trace filtering helpers.
Add an early return to the trace filtering helpers if KVM isn't
initialized, avoiding the NULL dereference. Take this opportunity
to move the TRBE-skipping checks to a common helper.
Fixes: 054b88391b ("KVM: arm64: Support trace filtering for guests")
Signed-off-by: Yingchao Deng <yingchao.deng@oss.qualcomm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
[maz: repainted the helpers to be readable, and the commit message
with Oliver's suggestion]
Signed-off-by: Marc Zyngier <maz@kernel.org>
If multiple instances of this driver are instantiated and try to send
concurrently then the single static buffer snd_serial_generic_tx_work()
will cause corruption in the data output.
Move the buffer into the per-instance driver data to avoid this.
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
System software reads resctrl event data for a particular resource by writing
the RMID and Event Identifier (EvtID) to the QM_EVTSEL register and then
reading the event data from the QM_CTR register.
In ABMC mode, the event data of a specific counter ID is read by setting the
following fields: QM_EVTSEL.ExtendedEvtID = 1, QM_EVTSEL.EvtID = L3CacheABMC
(=1) and setting QM_EVTSEL.RMID to the desired counter ID. Reading the QM_CTR
then returns the contents of the specified counter ID. RMID_VAL_ERROR bit is
set if the counter configuration is invalid, or if an invalid counter ID is
set in the QM_EVTSEL.RMID field. RMID_VAL_UNAVAIL bit is set if the counter
data is unavailable.
Introduce resctrl_arch_reset_cntr() and resctrl_arch_cntr_read() to reset and
read event data for a specific counter.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
When building with -Wincompatible-function-pointer-types-strict, a
warning designed to catch kernel control flow integrity (kCFI) issues at
build time, there is an instance in the new tiny DRM pixpaper driver:
drivers/gpu/drm/tiny/pixpaper.c:982:16: error: incompatible function pointer types initializing 'enum drm_mode_status (*)(struct drm_crtc *, const struct drm_display_mode *)' with an expression of type 'int (struct drm_crtc *, const struct drm_display_mode *)' [-Werror,-Wincompatible-function-pointer-types-strict]
982 | .mode_valid = pixpaper_mode_valid,
| ^~~~~~~~~~~~~~~~~~~
While 'int' and 'enum drm_mode_status' are ABI compatible, hence no
regular warning from -Wincompatible-function-pointer-types, the mismatch
will trigger a kCFI violation when pixpaper_mode_valid() is called
indirectly.
Update the return type of pixpaper_mode_valid() to be
'enum drm_mode_status' to clear up the warning and kCFI violation.
Fixes: c9e70639f5 ("drm: tiny: Add support for Mayqueen Pixpaper e-ink panel")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250908-drm-pixpaper-fix-mode_valid-return-type-v1-1-705ceaf03757@kernel.org
resctrl_arch_rmid_read() adjusts the value obtained from MSR_IA32_QM_CTR to
account for the overflow for MBM events and apply counter scaling for all the
events. This logic is common to both reading an RMID and reading a hardware
counter directly.
Refactor the hardware value adjustment logic into get_corrected_val() to
prepare for support of reading a hardware counter.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
When supported, "mbm_event" counter assignment mode allows users to assign
a hardware counter to an RMID, event pair and monitor the bandwidth usage as
long as it is assigned. The hardware continues to track the assigned counter
until it is explicitly unassigned by the user.
Introduce the architecture calls resctrl_arch_cntr_read() and
resctrl_arch_reset_cntr() to read and reset event counters when "mbm_event"
mode is supported. Function names match existing resctrl_arch_rmid_read() and
resctrl_arch_reset_rmid().
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
Reading monitoring data for a monitoring group requires both the RMID and
CLOSID. The RMID and CLOSID are members of struct rdtgroup but passed
separately to several functions involved in retrieving event data.
When "mbm_event" counter assignment mode is enabled, a counter ID is required
to read event data. The counter ID is obtained through mbm_cntr_get(), which
expects a struct rdtgroup pointer.
Provide a pointer to the struct rdtgroup as parameter to functions involved in
retrieving event data to simplify access to RMID, CLOSID, and counter ID.
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/cover.1757108044.git.babu.moger@amd.com
Peter Chiu
Howard Hsu
Felix Fietkau
Hengqi Chen
Kaustabh Chakraborty
Joe Lawrence
Babu Moger
Yingchao Deng
John Keeping
Nathan Chancellor