pin-init changes for v6.18
Changed:
- `#[pin_data]` now generates a `*Projection` struct similar to the
`pin-project` crate.
- Add initializer code blocks to `[try_][pin_]init!` macros: make
initializer macros accept any number of `_: {/* arbitrary code */},` &
make them run the code at that point.
- Make the `[try_][pin_]init!` macros expose initialized fields via a
`let` binding as `&mut T` or `Pin<&mut T>` for later fields.
Upstream dev news:
- Released v0.0.10 before the changes included in this tag.
- Inform users of the impending rename from `pinned-init` to `pin-init`
(in the kernel the rename already happened).
- More CI improvements.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
From: Benno Lossin <lossin@kernel.org>
Link: https://lore.kernel.org/r/20250912174148.373530-1-lossin@kernel.org
Pull pci fix from Bjorn Helgaas:
- Fix mvebu PCI enumeration regression caused by converting to
for_each_of_range() iterator (Klaus Kudielka)
* tag 'pci-v6.17-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: mvebu: Fix use of for_each_of_range() iterator
Fix this warning while building the documentation:
Documentation/gpu/xe/xe_configfs:9: drivers/gpu/drm/xe/xe_configfs.c:138:
WARNING: Definition list ends without a blank line; unexpected unindent.
That also makes it better formatted in the output.
While at it, also fix the underline length in "Overview".
Fixes: e2b33fce5e ("drm/xe/configfs: Improve documentation steps")
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://lore.kernel.org/r/20250911-wa-bb-cmds-v4-2-c8f7e48f7eae@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Pull drm fixes from Dave Airlie:
"Weekly pull fixes for drm, mostly amdgpu and xe, with a revert for
nouveau and some maintainers updates, and misc bits, doesn't seem too
out of the normal.
MAINTAINERS:
- add rust tree to MAINTAINERS
- fix X entries for nova/nouveau
nova:
- depend on 64-bit
i915:
- Fix size for for_each_set_bit() in abox iteration
xe:
- Don't touch survivability_mode on fini
- Fixes around eviction and suspend
- Extend Wa_13011645652 to PTL-H, WCL
amdgpu:
- PSP 11.x fix
- DPCD quirk handing fix
- DCN 3.5 PG fix
- Audio suspend fix
- OEM i2c clean up fix
- Module unload memory leak fix
- DC delay fix
- ISP firmware fix
- VCN fixes
amdkfd:
- P2P topology fix
- APU mem limit calculation fix
mediatek:
- fix potential OF node use-after-free
panthor:
- out-of-bounds check
nouveau:
- revert waitqueue removal for sched teardown
* tag 'drm-fixes-2025-09-12' of https://gitlab.freedesktop.org/drm/kernel: (25 commits)
MAINTAINERS: drm-misc: fix X: entries for nova/nouveau
drm/mediatek: clean up driver data initialisation
drm/mediatek: fix potential OF node use-after-free
drm/amdgpu/vcn: Allow limiting ctx to instance 0 for AV1 at any time
drm/amdgpu/vcn4: Fix IB parsing with multiple engine info packages
drm/amd/amdgpu: Declare isp firmware binary file
drm/amd/display: use udelay rather than fsleep
drm/amdgpu: fix a memory leak in fence cleanup when unloading
drm/xe: Extend Wa_13011645652 to PTL-H, WCL
drm/xe: Block exec and rebind worker while evicting for suspend / hibernate
drm/xe: Allow the pm notifier to continue on failure
drm/xe: Attempt to bring bos back to VRAM after eviction
drm/xe/configfs: Don't touch survivability_mode on fini
amd/amdkfd: correct mem limit calculation for small APUs
drm/amdkfd: fix p2p links bug in topology
drm/amd/display: remove oem i2c adapter on finish
drm/amd/display: Drop dm_prepare_suspend() and dm_complete()
drm/amd/display: Correct sequences and delays for DCN35 PG & RCG
drm/amd/display: Disable DPCD Probe Quirk
drm/i915/power: fix size for for_each_set_bit() in abox iteration
...
When the watchdog gets enabled with this driver, it leaves enough time
for the core watchdog subsystem to start pinging it. But when the
watchdog is already started by hardware or by the boot loader, little
time remains before it fires and it happens that the core watchdog
subsystem doesn't have time to start pinging it.
Until commit 19ce9490aa ("watchdog: mpc8xxx: use the core worker
function") pinging was managed by the driver itself and the watchdog
was immediately pinged by setting the timer expiry to 0.
So restore similar behaviour by pinging it when enabling it so that
if it was already enabled the watchdog timer counter is reloaded.
Fixes: 19ce9490aa ("watchdog: mpc8xxx: use the core worker function")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Increase max_timeout value from 55s to 3665038s (1018h 3min 58s) with
38400000 frequency system if the system has 32-bit WTCNT register.
cat /sys/class/watchdog/watchdog0/max_timeout
3665038
[ 0.330082] s3c2410-wdt 10060000.watchdog_cl0: Heartbeat: count=1099511400000, timeout=3665038, freq=300000
[ 0.330087] s3c2410-wdt 10060000.watchdog_cl0: Heartbeat: timeout=3665038, divisor=256, count=1099511400000 (fffffc87)
[ 0.330127] s3c2410-wdt 10060000.watchdog_cl0: starting watchdog timer
[ 0.330134] s3c2410-wdt 10060000.watchdog_cl0: Starting watchdog: count=0xfffffc87, wtcon=0001ff39
[ 0.330319] s3c2410-wdt 10060000.watchdog_cl0: watchdog active, reset enabled, irq disabled
If the system has a 32-bit WTCNT, add QUIRK_HAS_32BIT_CNT to its quirk flags,
and it will operate with a 32-bit counter. If not, it will operate with a 16-bit
counter like in the previous version.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Sangwook Shin <sw617.shin@samsung.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Fix the issue of max_timeout being calculated larger than actual value.
The calculation result of freq / (S3C2410_WTCON_PRESCALE_MAX + 1) /
S3C2410_WTCON_MAXDIV is smaller than the actual value because the remainder
is discarded during the calculation process. This leads to a larger
calculated value for max_timeout compared to the actual settable value.
To resolve this issue, the order of calculations in the computation process
has been adjusted.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Sangwook Shin <sw617.shin@samsung.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Modify the code to utilize macro-defined values instead of hardcoded
values. The value 0x100 in the s3c2410wdt_set_heartbeat function represents
S3C2410_WTCON_PRESCALE_MAX + 1, but it is hardcoded, making its meaning
difficult to understand and reducing code readability.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Sangwook Shin <sw617.shin@samsung.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Add support for the RZ/T2H watchdog timer. The RZ/T2H requires control of
the watchdog counter using the WDT Debug Control Register (WDTDCR), which
allows explicitly stopping and starting the counter. This behavior differs
from RZ/V2H, which doesn't have WDTDCR, so the driver is extended to handle
this requirement.
To support this, a new `wdtdcr` flag is introduced in the `rzv2h_of_data`
structure. When set, the driver maps the WDTDCR register and uses it to
control the watchdog counter in the start, stop, and restart callbacks.
Additionally, the clock divisor and count source for RZ/T2H are defined
to match its hardware configuration.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Add support for selecting the count clock source used by the watchdog
timer. The RZ/V2H(P) SoC uses the LOCO as the count source, whereas on
RZ/T2H and RZ/N2H SoCs, the count source is the peripheral clock (PCLKL).
Introduce a `count_source` field in the SoC-specific data structure and
refactor the clock rate selection logic accordingly. This prepares the
driver for supporting the RZ/T2H and RZ/N2H SoCs, which differ in their
watchdog clocking architecture from RZ/V2H(P).
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Update the rzv2h_wdt driver to make the "oscclk" clock and reset
controller optional.
Use devm_clk_get_optional_prepared() to obtain the "oscclk" clock,
allowing the driver to work on platforms that do not provide this clock,
such as the RZ/T2H SoC.
Similarly, use devm_reset_control_get_optional_exclusive() to allow the
driver to function on platforms that lack a reset controller.
These changes are preparatory steps for supporting the RZ/T2H SoC, which
does not provide an "oscclk" clock or a reset controller.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Update the rzv2h_wdt driver to fetch clock configuration and timeout
parameters from device tree match data rather than relying on hardcoded
constants. Introduce a new structure rzv2h_of_data that encapsulates
minimum and maximum clock select values (cks_min and cks_max), clock
divider (cks_div), timeout cycle count (timeout_cycles), and the
timeout period select bits (tops). These values are provided through
the OF match table and retrieved via of_device_get_match_data() during
probe.
This change allows dynamic configuration of the watchdog timer for
different SoCs, such as the RZ/T2H, which require different settings.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Extend the Renesas WDT device tree bindings to support the watchdog timer
found on the RZ/T2H (R9A09G077) and RZ/N2H (R9A09G087) SoCs.
The RZ/T2H WDT is mostly compatible with the one found on the RZ/V2H(P),
but includes an additional register and differs in the clock division
ratio settings for the WDTCR[CKS] field. To reflect these differences,
introduce a new compatible string, "renesas,r9a09g077-wdt".
The binding schema is updated accordingly. On RZ/T2H, the WDT does not
require the "resets" property. It also requires two register regions and
the presence of a "power-domains" property. The "clock-names" property is
limited to a single entry, "pclk", for this SoC.
The RZ/N2H SoC uses the same WDT IP as the RZ/T2H. It is supported by
using "renesas,r9a09g087-wdt" as the primary compatible string, with
"renesas,r9a09g077-wdt" listed as a fallback to describe the shared
hardware features.
Example:
wdt0: watchdog@80082000 {
compatible = "renesas,r9a09g077-wdt";
reg = <0 0x80082000 0 0x400>,
<0 0x81295100 0 0x04>;
clocks = <&cpg CPG_CORE R9A09G077_CLK_PCLKL>;
clock-names = "pclk";
power-domains = <&cpg>;
status = "disabled";
};
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Pull smb client fixes from Steve French:
"Two smb3 client fixes, both for stable:
- Fix encryption problem with multiple compounded ops
- Fix rename error cases that could lead to data corruption"
* tag 'v6.17-rc5-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: fix data loss due to broken rename(2)
smb: client: fix compound alignment with encryption
SoCFPGA DTS fix for v6.17
- Fix midio bus probe and PHY address for cylone5 sodia board
* tag 'socfpga_dts_fix_for_v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: dts: socfpga: sodia: Fix mdio bus probe and PHY address
Link: https://lore.kernel.org/r/20250907123058.175447-1-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
mvebu fixes for 6.17 (part 1)
Fix SATA ports on various boards: Macchiatobin, CN913x-solidrun.
Fix audio on Armada 370 DB and OpenRD.
Disable eMMC high-speed modes on the CN9132 CEX-7 module.
Disable runtime reconfiguration for PCIe lanes on the CN9132 CEX-7 module.
* tag 'mvebu-fixes-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
arm64: dts: marvell: cn9132-clearfog: fix multi-lane pci x2 and x4 ports
arm64: dts: marvell: cn9132-clearfog: disable eMMC high-speed modes
arm64: dts: marvell: cn913x-solidrun: fix sata ports status
ARM: dts: kirkwood: Fix sound DAI cells for OpenRD clients
ARM64: dts: mcbin: fix SATA ports on Macchiatobin
ARM: dts: armada-370-db: Fix stereo audio input routing on Armada 370
Link: https://lore.kernel.org/r/87ikhnn1pl.fsf@BLaptop.bootlin.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Asus Z13 folio has a multitouch touchpad that needs to bind
to the hid-multitouch driver in order to work properly. So bind
it to the HID_GROUP_GENERIC group to release the touchpad and
move it to the bottom so that the comment applies to it.
While at it, change the generic KEYBOARD3 name to Z13_FOLIO.
Reviewed-by: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Following the removal of B2120 board support, the st/stih407-clock.dtsi
file has been left unused. Remove it.
Fixes: dee546e1ad ("ARM: sti: drop B2120 board support")
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
As reported by Dan Carpenter, if the axes_enable field wasn't found,
trying to find the axes themselves will result in a null pointer
dereference. This could only occur with a broken PID descriptor, but
it's worth protecting from.
Exit early if the axes_enable wasn't found AND add a gate to the
pidff_find_special_keys to exit early if the passed HID field is null.
This will protect again null dereferencing in the future and properly
return 0 found special keys.
Fixes: 1d72e7bd34 ("HID: pidff: Add support for AXES_ENABLE field")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
timed_wait_for_timeout() internally checks for ish_is_input_ready() and
ishtp_fw_is_ready() based on the provided parameters. If
timed_wait_for_timeout() returns 0, it indicates the status is ready. In
rare cases, another thread may send a message immediately after
timed_wait_for_timeout() returns, causing a subsequent ish_is_input_ready()
check to fail. Since the return value of timed_wait_for_timeout() is
sufficient to determine readiness, the additional ready check is
unnecessary and may introduce issues.
This patch removes the redundant check and relies solely on the return
value of timed_wait_for_timeout().
Fixes: ae02e5d40d ("HID: intel-ish-hid: ipc layer")
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Add support for missing hotkey keycodes affecting Asus PX13 and PX16 families
so userspace can use them.
Signed-off-by: Amit Chaudhari <amitchaudhari@mac.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Since commit 6485543488 ("HID: cp2112: use new line value setter
callbacks"), setting a GPIO value always fails with error -EBADE.
That's because the returned value by the setter callbacks is the
returned value by the hid_hw_raw_request() function which is the number of
bytes sent on success or a negative value on error. The function
gpiochip_set() returns -EBADE if the setter callbacks return a value >
0.
Fix this by making the setter callbacks return 0 on success or a negative
value on error.
While at it, use the returned value by cp2112_gpio_set_unlocked() in the
direction_output callback.
Fixes: 6485543488 ("HID: cp2112: use new line value setter callbacks")
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
When a BPF gets loaded, it was previously not possible to bind a
hid-generic device to hid-multitouch because the group was never
updated.
This change forces a rescan of the report descriptor after a bpf is
loaded/unloaded so we set up the proper group.
This was detected while Peter was trying to fix a Viewsonic device: the
HID device sending multiotuch data through a proprietary collection was
handled by hid-generic, and we don't have any way of attaching it to
hid-multitouch because the pre-scanning wasn't able to see the Contact
ID HID usage.
Suggested-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
When we load a bpf, we can change the report descriptor. However, the
current implementation doesn't change the group meaning that we can not
rebind a device from hid-generic to hid-multitouch.
This is a preparatory patch to force a rescan of the device after the
bpf has been loaded.
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Commit 84c9d2a968 ("HID: lenovo: Support for ThinkPad-X12-TAB-1/2 Kbd
Fn keys") added a dependency on ACPI's platform_profile. This should not
be done for generic USB devices as this prevents using the devices on
non ACPI devices like Apple silicon Macs and other non-ACPI arm64
systems. An attempt to allow using platform_profile on non-ACPI systems
was rejected in [1] and instead platform_profile was made to fail during
init in commit dd133162c9 ("ACPI: platform_profile: Avoid initializing
on non-ACPI platforms").
So remove the broken dependency and instead let's user space handle this
keycode by sending the new KEY_PERFORMANCE. Stable backport depends on
commit 89c5214639 ("Input: add keycode for performance mode key").
[1]: https://lore.kernel.org/linux-acpi/CAJZ5v0icRdTSToaKbdf=MdRin4NyB2MstUVaQo8VR6-n7DkVMQ@mail.gmail.com/
Cc: regressions@lists.linux.dev
Cc: stable@vger.kernel.org
Fixes: 84c9d2a968 ("HID: lenovo: Support for ThinkPad-X12-TAB-1/2 Kbd Fn keys")
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Refactor: eliminate type casts by using proper u32
declarations.
v2:
- Address review comments. (Karthik)
v3:
- Use the proper u32 type and drop cast. (Lucas De Marchi)
- Modify variable when actually using u64 value.
- Change r value to reg_value with u32 type.
v4:
- Remove newline between trailer and Signed-off-by. (Lucas De Marchi)
- Change reg_val to val for more user-friendly logging.
- Use mul_u32_u32 function since both values are u32.
v5:
- mul_u32_u32 function with shift. (Lucas De Marchi)
Fixes: 7596d839f6 ("drm/xe/hwmon: Add support to manage power limits though mailbox")
Signed-off-by: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250912113458.2815172-1-mallesh.koujalagi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
When runtime PM is used for clock providers that are part of a power
domain, the power domain supply is cut off during runtime suspend. This
causes all BLK CTL registers belonging to that power domain to reset. To
prevent this, save the state of the registers before entering suspend
and restore them on resume. Additionally, disable the APB clock during
suspend to minimize power consumption.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250804131450.3918846-3-laurentiu.palcu@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
If copy_from_user() fails, write() currently returns -EFAULT, but any
partially written data leaves the TX FIFO in an inconsistent state.
Subsequent write() calls then fail with "transmit length mismatch"
errors.
Once partial data is written to the hardware FIFO, it cannot be removed
without a TX reset. Commit c6e8d85faf ("staging: axis-fifo: Remove
hardware resets for user errors") removed a full FIFO reset for this case,
which fixed a potential RX data loss, but introduced this TX issue.
Fix this by introducing a bounce buffer: copy the full packet from
userspace first, and write to the hardware FIFO only if the copy
was successful.
Fixes: c6e8d85faf ("staging: axis-fifo: Remove hardware resets for user errors")
Cc: stable@vger.kernel.org
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Link: https://lore.kernel.org/r/20250912101322.1282507-1-ovidiu.panait.oss@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Danilo Krummrich
Linus Torvalds
Lucas De Marchi
Christophe Leroy
Wolfram Sang
Sangwook Shin
Lad Prabhakar
Guenter Roeck
Arnd Bergmann
Antheas Kapenekakis
Raphael Gallais-Pou
Tomasz Pakuła
Zhang Lixu
Amit Chaudhari
Sébastien Szymanski
Benjamin Tissoires
Janne Grunau
Jiri Kosina
Mallesh Koujalagi
Ling Xu
Michael Walle
Laurentiu Palcu
Ovidiu Panait
Colin Ian King
Harish Chegondi
AngeloGioacchino Del Regno