The TPS23881 improves on the TPS23880 with current sense resistors reduced
from 255 mOhm to 200 mOhm. This has a direct impact on the scaling of the
current measurement. However, the latest TPS23881 data sheet from May 2023
still shows the scaling of the TPS23880 model.
Fixes: 7f076ce3f1 ("net: pse-pd: tps23881: Add support for power limit and measurement features")
Signed-off-by: Thomas Wismer <thomas.wismer@scs.ch>
Acked-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20251006204029.7169-2-thomas@wismer.xyz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull ARM development updates from Russell King:
- Use string choices helpers
- Add support for HAVE_FUNCTION_GRAPH_FREGS
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9457/1: ftrace: Implement HAVE_FUNCTION_GRAPH_FREGS
ARM: 9456/1: mm: fault: use string choices helper
ARM: 9454/1: kernel: bios32: use string choices helper
ARM: 9451/1: mm: l2x0: use string choices helper
syzkaller discovered the following crash: (kernel BUG)
[ 44.607039] ------------[ cut here ]------------
[ 44.607422] kernel BUG at mm/userfaultfd.c:2067!
[ 44.608148] Oops: invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI
[ 44.608814] CPU: 1 UID: 0 PID: 2475 Comm: reproducer Not tainted 6.16.0-rc6 #1 PREEMPT(none)
[ 44.609635] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[ 44.610695] RIP: 0010:userfaultfd_release_all+0x3a8/0x460
<snip other registers, drop unreliable trace>
[ 44.617726] Call Trace:
[ 44.617926] <TASK>
[ 44.619284] userfaultfd_release+0xef/0x1b0
[ 44.620976] __fput+0x3f9/0xb60
[ 44.621240] fput_close_sync+0x110/0x210
[ 44.622222] __x64_sys_close+0x8f/0x120
[ 44.622530] do_syscall_64+0x5b/0x2f0
[ 44.622840] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 44.623244] RIP: 0033:0x7f365bb3f227
Kernel panics because it detects UFFD inconsistency during
userfaultfd_release_all(). Specifically, a VMA which has a valid pointer
to vma->vm_userfaultfd_ctx, but no UFFD flags in vma->vm_flags.
The inconsistency is caused in ksm_madvise(): when user calls madvise()
with MADV_UNMEARGEABLE on a VMA that is registered for UFFD in MINOR mode,
it accidentally clears all flags stored in the upper 32 bits of
vma->vm_flags.
Assuming x86_64 kernel build, unsigned long is 64-bit and unsigned int and
int are 32-bit wide. This setup causes the following mishap during the &=
~VM_MERGEABLE assignment.
VM_MERGEABLE is a 32-bit constant of type unsigned int, 0x8000'0000.
After ~ is applied, it becomes 0x7fff'ffff unsigned int, which is then
promoted to unsigned long before the & operation. This promotion fills
upper 32 bits with leading 0s, as we're doing unsigned conversion (and
even for a signed conversion, this wouldn't help as the leading bit is 0).
& operation thus ends up AND-ing vm_flags with 0x0000'0000'7fff'ffff
instead of intended 0xffff'ffff'7fff'ffff and hence accidentally clears
the upper 32-bits of its value.
Fix it by changing `VM_MERGEABLE` constant to unsigned long, using the
BIT() macro.
Note: other VM_* flags are not affected: This only happens to the
VM_MERGEABLE flag, as the other VM_* flags are all constants of type int
and after ~ operation, they end up with leading 1 and are thus converted
to unsigned long with leading 1s.
Note 2:
After commit 31defc3b01 ("userfaultfd: remove (VM_)BUG_ON()s"), this is
no longer a kernel BUG, but a WARNING at the same place:
[ 45.595973] WARNING: CPU: 1 PID: 2474 at mm/userfaultfd.c:2067
but the root-cause (flag-drop) remains the same.
[akpm@linux-foundation.org: rust bindgen wasn't able to handle BIT(), from Miguel]
Link: https://lore.kernel.org/oe-kbuild-all/202510030449.VfSaAjvd-lkp@intel.com/
Link: https://lkml.kernel.org/r/20251001090353.57523-2-acsjakub@amazon.de
Fixes: 7677f7fd8b ("userfaultfd: add minor fault registration mode")
Signed-off-by: Jakub Acs <acsjakub@amazon.de>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: SeongJae Park <sj@kernel.org>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Xu Xin <xu.xin16@zte.com.cn>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Peter Xu <peterx@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON's virtual address space operation set implementation (vaddr) calls
pte_offset_map_lock() inside the page table walk callback function. This
is for reading and writing page table accessed bits. If
pte_offset_map_lock() fails, it retries by returning the page table walk
callback function with ACTION_AGAIN.
pte_offset_map_lock() can continuously fail if the target is a pmd
migration entry, though. Hence it could cause an infinite page table walk
if the migration cannot be done until the page table walk is finished.
This indeed caused a soft lockup when CPU hotplugging and DAMON were
running in parallel.
Avoid the infinite loop by simply not retrying the page table walk. DAMON
is promising only a best-effort accuracy, so missing access to such pages
is no problem.
Link: https://lkml.kernel.org/r/20250930004410.55228-1-sj@kernel.org
Fixes: 7780d04046 ("mm/pagewalkers: ACTION_AGAIN if pte_offset_map_lock() fails")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: Xinyu Zheng <zhengxinyu6@huawei.com>
Closes: https://lore.kernel.org/20250918030029.2652607-1-zhengxinyu6@huawei.com
Acked-by: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org> [6.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A vmalloc allocation is preserved using binary structure similar to global
KHO memory tracker. It's a linked list of pages where each page is an
array of physical address of pages in vmalloc area.
kho_preserve_vmalloc() hands out the physical address of the head page to
the caller. This address is used as the argument to kho_vmalloc_restore()
to restore the mapping in the vmalloc address space and populate it with
the preserved pages.
[pasha.tatashin@soleen.com: free chunks using free_page() not kfree()]
Link: https://lkml.kernel.org/r/mafs0a52idbeg.fsf@kernel.org
[akpm@linux-foundation.org: coding-style cleanups]
Link: https://lkml.kernel.org/r/20250921054458.4043761-4-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Changyuan Lyu <changyuanl@google.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "kho: add support for preserving vmalloc allocations", v5.
Following the discussion about preservation of memfd with LUO [1] these
patches add support for preserving vmalloc allocations.
Any KHO uses case presumes that there's a data structure that lists
physical addresses of preserved folios (and potentially some additional
metadata). Allowing vmalloc preservations with KHO allows scalable
preservation of such data structures.
For instance, instead of allocating array describing preserved folios in
the fdt, memfd preservation can use vmalloc:
preserved_folios = vmalloc_array(nr_folios, sizeof(*preserved_folios));
memfd_luo_preserve_folios(preserved_folios, folios, nr_folios);
kho_preserve_vmalloc(preserved_folios, &folios_info);
This patch (of 4):
Instead of checking if kho is finalized in each caller of
__kho_preserve_order(), do it in the core function itself.
Link: https://lkml.kernel.org/r/20250921054458.4043761-1-rppt@kernel.org
Link: https://lkml.kernel.org/r/20250921054458.4043761-2-rppt@kernel.org
Link: https://lore.kernel.org/all/20250807014442.3829950-30-pasha.tatashin@soleen.com [1]
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Changyuan Lyu <changyuanl@google.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In `nouveau_bo_move_prep`, if `nouveau_mem_map` fails, an error code
should be returned. Currently, it returns zero even if vmm addr is not
correctly mapped.
Cc: stable@vger.kernel.org
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Shuhao Fu <sfual@cse.ust.hk>
Fixes: 9ce523cc3b ("drm/nouveau: separate buffer object backing memory from nvkm structures")
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Pull dma-mapping fixes from Marek Szyprowski:
"Two small fixes for the recently performed code refactoring (Shigeru
Yoshida) and missing handling of direction parameter in DMA debug code
(Petr Tesarik)"
* tag 'dma-mapping-6.18-2025-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma-mapping: fix direction in dma_alloc direction traces
kmsan: fix kmsan_handle_dma() to avoid false positives
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
* Return directly after a call of the function “genlmsg_new” failed
at the beginning.
* Delete the label “fail” which became unnecessary
with this refactoring.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull char/misc fixes from Greg KH:
"Here are some small nvmem and fastrpc fixes that missed the cut-off to
get into 6.17-final, due to me being slow in getting them out, my
fault, not the maintainers of these subsystems :(
Anyway, better late than never. Changes included in here are:
- nvmem fix for automatic module loading
- fastrpc driver fixes for reported issues
All of these have been in linux-next for weeks (4?) with no reported
issues"
* tag 'char-misc-6.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
misc: fastrpc: Skip reference for DMA handles
misc: fastrpc: fix possible map leak in fastrpc_put_args
misc: fastrpc: Fix fastrpc_map_lookup operation
misc: fastrpc: Save actual DMA size in fastrpc_map structure
nvmem: layouts: fix automatic module loading
Pull staging driver fixes from Greg KH:
"Here are some staging driver fixes that missed 6.17-final due to my
travel schedule. They fix a number of reported issues in the axis-fifo
driver, one of which was just independently discovered by someone else
today so someone is looking at this code.
All of these fixes have been in linux-next for many weeks with no
reported issues"
* tag 'staging-6.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: axis-fifo: flush RX FIFO on read errors
staging: axis-fifo: fix TX handling on copy_from_user() failure
staging: axis-fifo: fix maximum TX packet length check
Pull tty driver fix from Greg KH:
"Here is a single driver fix for the qcom_geni_serial driver. It has
been in my tree for weeks, but missed being sent to you for 6.17-final
due to travel on my side.
This fixes a reported regression for this driver that prevents 6.17
from working properly on this platform.
It has been in linux-next for many weeks with no reported issues"
* tag 'tty-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: qcom-geni: Fix blocked task
Pull more thermal control updates from Rafael Wysocki:
"Fix RZ/G3E driver introduction fall-out (Geert Uytterhoeven) and
improve the compilation and installation of the thermal library for
user space (Emil Dahl Juhl and Sascha Hauer)"
* tag 'thermal-6.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
tools: lib: thermal: expose thermal_exit symbols
tools: lib: thermal: don't preserve owner in install
tools: lib: thermal: use pkg-config to locate libnl3
thermal: renesas: Fix RZ/G3E fall-out
If reinitialization of one of the GPUs fails after reset, it logs
failure on all subsequent GPUs eventhough they have resumed
successfully.
A sample log where only device at 0000:95:00.0 had a failure -
amdgpu 0000:15:00.0: amdgpu: GPU reset(19) succeeded!
amdgpu 0000:65:00.0: amdgpu: GPU reset(19) succeeded!
amdgpu 0000:75:00.0: amdgpu: GPU reset(19) succeeded!
amdgpu 0000:85:00.0: amdgpu: GPU reset(19) succeeded!
amdgpu 0000:95:00.0: amdgpu: GPU reset(19) failed
amdgpu 0000:e5:00.0: amdgpu: GPU reset(19) failed
amdgpu 0000:f5:00.0: amdgpu: GPU reset(19) failed
amdgpu 0000:05:00.0: amdgpu: GPU reset(19) failed
amdgpu 0000:15:00.0: amdgpu: GPU reset end with ret = -5
To avoid confusion, report the error for each device
separately and return the first error as the overall result.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The CI systems are pointing out list corruptions, so we still need to
fix something here.
Keep the asserts, but revert the lock changes for now.
Fixes: 59e4405e9e ("drm/amdgpu: revert to old status lock handling v3")
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The point of isolating code that uses kernel mode FPU in separate
compilation units is to ensure that even implicit uses of, e.g., SIMD
registers for spilling occur only in a context where this is permitted,
i.e., from inside a kernel_fpu_begin/end block.
This is important on arm64, which uses -mgeneral-regs-only to build all
kernel code, with the exception of such compilation units where FP or
SIMD registers are expected to be used. Given that the compiler may
invent uses of FP/SIMD anywhere in such a unit, none of its code may be
accessible from outside a kernel_fpu_begin/end block.
This means that all callers into such compilation units must use the
DC_FP start/end macros, which must not occur there themselves. For
robustness, all functions with external linkage that reside there should
call dc_assert_fp_enabled() to assert that the FPU context was set up
correctly.
Fix this for the DCN35, DCN351 and DCN36 implementations.
Cc: Austin Zheng <austin.zheng@amd.com>
Cc: Jun Lei <jun.lei@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <siqueira@igalia.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Disable VCN reset capability for the program 4 as it's
causing regressions.
Fixes: 9d20f37a10 ("drm/amd/pm: Add VCN reset support for SMU v13.0.6")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PMFW interface version is not used by some IP implementations like SMU
v13.0.6/12, instead rely on PMFW version checks. Avoid the log if
interface version is not used.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As KFD no longer uses a separate PASID, the global amdgpu_vm_set_pasid()function is no longer necessary.
Merge its functionality directly intoamdgpu_vm_init() to simplify code flow and eliminate redundant locking.
v2: remove superflous check
adjust amdgpu_vm_fin and remove amdgpu_vm_set_pasid (Chritian)
v3: drop amdgpu_vm_assert_locked (Chritian)
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4614
Fixes: 59e4405e9e ("drm/amdgpu: revert to old status lock handling v3")
Reviewed-by: Christian König <christian.koenig@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MES version 0x83 is not stable to use the inv_tlbs API. Defer it to 0x84 vertsion.
Fixes: 85442bac84 ("drm/amd/amdgpu: Fix the mes version that support inv_tlbs")
Signed-off-by: Shaoyun Liu <shaoyun.liu@amd.com>
Reviewed-by: Michael Chen <michael.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Not all renoir hardware supports secure display. If the TA is present
but the feature isn't supported it will fail to load or send commands.
This shows ERR messages to the user that make it seems like there is
a problem.
[How]
Check the resp_status of the context to see if there was an error
before trying to send any secure display commands.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/1415
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If mmap write lock is taken while draining retry fault, mmap write lock
is not released because svm_range_restore_pages calls mmap_read_unlock
then returns. This causes deadlock and system hangs later because mmap
read or write lock cannot be taken.
Downgrade mmap write lock to read lock if draining retry fault fix this
bug.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kfd_lookup_process_by_pid hold the kfd process reference to ensure it
doesn't get destroyed while sending the segfault event to user space.
Calling kfd_lookup_process_by_pid as function parameter leaks the kfd
process refcount and miss the NULL pointer check if app process is
already destroyed.
Fixes: 2d274bf709 ("amd/amdkfd: Trigger segfault for early userptr unmmapping")
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is some probability that reset workqueue is blocked by KIQ I/O for 10+ seconds after gpu hangs.
So we need to add a in_reset check during each KIQ register poll.
Signed-off-by: Heng Zhou <Heng.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Scaling doesn't work on DCE6 at the moment, the current
register programming produces incorrect output when using
fractional scaling (between 100-200%) on resolutions higher
than 1080p.
Disable it until we figure out how to program it properly.
Fixes: 7c15fd86aa ("drm/amd/display: dc/dce: add initial DCE6 support (v10)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SCL_SCALER_ENABLE can be used to enable/disable the scaler
on DCE6. Program it to 0 when scaling isn't used, 1 when used.
Additionally, clear some other registers when scaling is
disabled and program the SCL_UPDATE register as recommended.
This fixes visible glitches for users whose BIOS sets up a
mode with scaling at boot, which DC was unable to clean up.
Fixes: b70aaf5586 ("drm/amd/display: dce_transform: add DCE6 specific macros,functions")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Previously, the code would set a bit field which didn't exist
on DCE6 so it would be effectively a no-op.
Fixes: b70aaf5586 ("drm/amd/display: dce_transform: add DCE6 specific macros,functions")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit 27758d8c25 ("kbuild: enable -Werror for hostprogs")
unconditionally enabled -Werror for the compiler, assembler, and linker
when building the host programs, as the build footprint of the host
programs is small (thus risk of build failures from warnings are low)
and that stage of the build may not have Kconfig values (thus
CONFIG_WERROR could not be used as a precondition).
While turning warnings into errors unconditionally happens in a few
places within the kernel, it can be disruptive to people who may be
building with newer compilers, such as while doing a bisect. While it is
possible to avoid this behavior by passing HOSTCFLAGS=-w or
HOSTCFLAGS=-Wno-error, it may not be the most intuitive for regular
users not intimately familiar with Kbuild.
Avoid being disruptive to the entire build by depending on the explicit
opt-in of CONFIG_WERROR or W=e to enable -Werror and the like while
building the host programs. While this means there is a small portion of
the build that does not have -Werror enabled (namely scripts/kconfig/*
and scripts/basic/fixdep), it is better than not having it altogether.
Fixes: 27758d8c25 ("kbuild: enable -Werror for hostprogs")
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Reported-by: Askar Safin <safinaskar@gmail.com>
Closes: https://lore.kernel.org/20251005011100.1035272-1-safinaskar@gmail.com/
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Tested-by: Miguel Ojeda <ojeda@kernel.org> # Rust
Link: https://patch.msgid.link/20251006-kbuild-hostprogs-werror-fix-v1-1-23cf1ffced5c@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Pull more ACPI updates from Rafael Wysocki:
"These fix a driver bug, clean up two pieces of code and improve the
fwnode API consistency:
- Add missing synchronization between interface updates in the ACPI
battery driver (Rafael Wysocki)
- Remove open coded check for cpu_feature_enabled() from
acpi_processor_power_init_bm_check() (Mario Limonciello)
- Remove redundant rcu_read_lock/unlock() under spinlock from
ghes_notify_hed() in the ACPI APEI support code (pengdonglin)
- Make the .get_next_child_node() callback in the ACPI fwnode backend
skip ACPI devices that are not present for consistency with the
analogous callback in the OF fwnode backend (Sakari Ailus)"
* tag 'acpi-6.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: property: Return present device nodes only on fwnode interface
ACPI: APEI: Remove redundant rcu_read_lock/unlock() under spinlock
ACPI: battery: Add synchronization between interface updates
x86/acpi/cstate: Remove open coded check for cpu_feature_enabled()
Thomas Wismer
Arnd Bergmann
Linus Torvalds
Yang Shi
Ryan Roberts
Jakub Acs
SeongJae Park
Lance Yang
Shakeel Butt
Mike Rapoport (Microsoft)
Umang Jain
Shuhao Fu
Markus Elfring
Jesse Agate
Fangzhi Zuo
Lijo Lazar
Christian König
Ard Biesheuvel
Jesse.Zhang
Felix Kuehling
Shaoyun Liu
Mario Limonciello
Philip Yang
Heng Zhou
Timur Kristóf
Alex Deucher
Kuniyuki Iwashima
Helge Deller
Dmitry Safonov
Nathan Chancellor