commit e966eae727 upstream.
For non-registered buffer, fastrpc driver copies the buffer and
pass it to the remote subsystem. There is a problem with current
implementation of page size calculation which is not considering
the offset in the calculation. This might lead to passing of
improper and out-of-bounds page size which could result in
memory issue. Calculate page start and page end using the offset
adjusted address instead of absolute address.
Fixes: 02b45b47fb ("misc: fastrpc: fix remote page size calculation")
Cc: stable@kernel.org
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20250110134239.123603-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6ca4ea1f88 upstream.
For registered buffers, fastrpc driver sends the buffer information
to remote subsystem. There is a problem with current implementation
where the page address is being sent with an offset leading to
improper buffer address on DSP. This is leads to functional failures
as DSP expects base address in page information and extracts offset
information from remote arguments. Mask the offset and pass the base
page address to DSP.
This issue is observed is a corner case when some buffer which is registered
with fastrpc framework is passed with some offset by user and then the DSP
implementation tried to read the data. As DSP expects base address and takes
care of offsetting with remote arguments, passing an offsetted address will
result in some unexpected data read in DSP.
All generic usecases usually pass the buffer as it is hence is problem is
not usually observed. If someone tries to pass offsetted buffer and then
tries to compare data at HLOS and DSP end, then the ambiguity will be observed.
Fixes: 80f3afd72b ("misc: fastrpc: consider address offset before sending to DSP")
Cc: stable@kernel.org
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20250110134239.123603-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7738a7ab9d ]
Add a quirk similar to eeprom_93xx46 to add an extra clock cycle before
reading data from the EEPROM.
The 93Cx6 family of EEPROMs output a "dummy 0 bit" between the writing
of the op-code/address from the host to the EEPROM and the reading of
the actual data from the EEPROM.
More info can be found on page 6 of the AT93C46 datasheet (linked below).
Similar notes are found in other 93xx6 datasheets.
In summary the read operation for a 93Cx6 EEPROM is:
Write to EEPROM: 110[A5-A0] (9 bits)
Read from EEPROM: 0[D15-D0] (17 bits)
Where:
110 is the start bit and READ OpCode
[A5-A0] is the address to read from
0 is a "dummy bit" preceding the actual data
[D15-D0] is the actual data.
Looking at the READ timing diagrams in the 93Cx6 datasheets the dummy
bit should be clocked out on the last address bit clock cycle meaning it
should be discarded naturally.
However, depending on the hardware configuration sometimes this dummy
bit is not discarded. This is the case with Exar PCI UARTs which require
an extra clock cycle between sending the address and reading the data.
Datasheet: https://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-5193-SEEPROM-AT93C46D-Datasheet.pdf
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Parker Newman <pnewman@connecttech.com>
Link: https://lore.kernel.org/r/0f23973efefccd2544705a0480b4ad4c2353e407.1727880931.git.pnewman@connecttech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b983b27166 ]
Disabling preemption in the GRU driver is unnecessary, and clashes with
sleeping locks in several code paths. Remove preempt_disable and
preempt_enable from the GRU driver.
Signed-off-by: Dimitri Sivanich <sivanich@hpe.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 48b9a8dabc upstream.
When removing a resource from vmci_resource_table in
vmci_resource_remove(), the search is performed using the resource
handle by comparing context and resource fields.
It is possible though to create two resources with different types
but same handle (same context and resource fields).
When trying to remove one of the resources, vmci_resource_remove()
may not remove the intended one, but the object will still be freed
as in the case of the datagram type in vmci_datagram_destroy_handle().
vmci_resource_table will still hold a pointer to this freed resource
leading to a use-after-free vulnerability.
BUG: KASAN: use-after-free in vmci_handle_is_equal include/linux/vmw_vmci_defs.h:142 [inline]
BUG: KASAN: use-after-free in vmci_resource_remove+0x3a1/0x410 drivers/misc/vmw_vmci/vmci_resource.c:147
Read of size 4 at addr ffff88801c16d800 by task syz-executor197/1592
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x82/0xa9 lib/dump_stack.c:106
print_address_description.constprop.0+0x21/0x366 mm/kasan/report.c:239
__kasan_report.cold+0x7f/0x132 mm/kasan/report.c:425
kasan_report+0x38/0x51 mm/kasan/report.c:442
vmci_handle_is_equal include/linux/vmw_vmci_defs.h:142 [inline]
vmci_resource_remove+0x3a1/0x410 drivers/misc/vmw_vmci/vmci_resource.c:147
vmci_qp_broker_detach+0x89a/0x11b9 drivers/misc/vmw_vmci/vmci_queue_pair.c:2182
ctx_free_ctx+0x473/0xbe1 drivers/misc/vmw_vmci/vmci_context.c:444
kref_put include/linux/kref.h:65 [inline]
vmci_ctx_put drivers/misc/vmw_vmci/vmci_context.c:497 [inline]
vmci_ctx_destroy+0x170/0x1d6 drivers/misc/vmw_vmci/vmci_context.c:195
vmci_host_close+0x125/0x1ac drivers/misc/vmw_vmci/vmci_host.c:143
__fput+0x261/0xa34 fs/file_table.c:282
task_work_run+0xf0/0x194 kernel/task_work.c:164
tracehook_notify_resume include/linux/tracehook.h:189 [inline]
exit_to_user_mode_loop+0x184/0x189 kernel/entry/common.c:187
exit_to_user_mode_prepare+0x11b/0x123 kernel/entry/common.c:220
__syscall_exit_to_user_mode_work kernel/entry/common.c:302 [inline]
syscall_exit_to_user_mode+0x18/0x42 kernel/entry/common.c:313
do_syscall_64+0x41/0x85 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x6e/0x0
This change ensures the type is also checked when removing
the resource from vmci_resource_table in vmci_resource_remove().
Fixes: bc63dedb7d ("VMCI: resource object implementation.")
Cc: stable@vger.kernel.org
Reported-by: George Kennedy <george.kennedy@oracle.com>
Signed-off-by: David Fernandez Gonzalez <david.fernandez.gonzalez@oracle.com>
Link: https://lore.kernel.org/r/20240828154338.754746-1-david.fernandez.gonzalez@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1db5322b7e ]
Change level for the "not connected" client message in the write
callback from error to debug.
The MEI driver currently disconnects all clients upon system suspend.
This behavior is by design and user-space applications with
open connections before the suspend are expected to handle errors upon
resume, by reopening their handles, reconnecting,
and retrying their operations.
However, the current driver implementation logs an error message every
time a write operation is attempted on a disconnected client.
Since this is a normal and expected flow after system resume
logging this as an error can be misleading.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20240530091415.725247-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e7f0be3f09 upstream.
User is passing capability ioctl structure(argp) to get DSP
capabilities. This argp is copied to a local structure to get domain
and attribute_id information. After getting the capability, only
capability value is getting copied to user argp which will not be
useful if the use is trying to get the capability by checking the
capability member of fastrpc_ioctl_capability structure. Copy the
complete capability structure so that user can get the capability
value from the expected member of the structure.
Fixes: 6c16fd8bdd ("misc: fastrpc: Add support to get DSP capabilities")
Cc: stable <stable@kernel.org>
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240628114501.14310-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4cb7915f0a upstream.
The DSP capability request call expects 2 arguments. First is the
information about the total number of attributes to be copied from
DSP and second is the information about the buffer where the DSP
needs to copy the information. The current design is passing the
information about the size to be copied from DSP which would be
considered as a bad argument to the call by DSP causing a failure
suggesting the same. The second argument carries the information
about the buffer where the DSP needs to copy the capability
information and the size to be copied. As the first entry of
capability attribute is getting skipped, same should also be
considered while sending the information to DSP. Add changes to
pass proper arguments to DSP.
Fixes: 6c16fd8bdd ("misc: fastrpc: Add support to get DSP capabilities")
Cc: stable <stable@kernel.org>
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240628114501.14310-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 086c6cbcc5 upstream.
When auxiliary_device_add() returns error and then calls
auxiliary_device_uninit(), callback function
gp_auxiliary_device_release() calls ida_free() and
kfree(aux_device_wrapper) to free memory. We should't
call them again in the error handling path.
Fix this by skipping the redundant cleanup functions.
Fixes: 393fc2f594 ("misc: microchip: pci1xxxx: load auxiliary bus driver for the PIO function in the multi-function endpoint of pci1xxxx device.")
Signed-off-by: Yongzhi Liu <hyperlyzcs@gmail.com>
Link: https://lore.kernel.org/r/20240523121434.21855-3-hyperlyzcs@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit caba40ec35 ]
The DDR3 SPD data structure advertises the presence of a thermal
sensor on a DDR3 module in byte 32, bit 7. Let's use this information
to explicitly instantiate the thermal sensor I2C client instead of
having to rely on class-based I2C probing.
The temp sensor i2c address can be derived from the SPD i2c address,
so we can directly instantiate the device and don't have to probe
for it. If the temp sensor has been instantiated already by other
means (e.g. class-based auto-detection), then the busy-check in
i2c_new_client_device will detect this.
Note: Thermal sensors on DDR4 DIMM's are instantiated from the
ee1004 driver.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/68113672-3724-44d5-9ff8-313dd6628f8c@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: f42c97027f ("eeprom: at24: fix memory corruption race condition")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a3c10035d1 ]
When using nvmem layouts it is possible devm_nvmem_register returns
-EPROBE_DEFER, resulting in an 'empty' in
/sys/kernel/debug/devices_deferred. Use dev_err_probe for providing
additional information.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Stable-dep-of: f42c97027f ("eeprom: at24: fix memory corruption race condition")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 19b070fefd ]
Syzkaller hit 'WARNING in dg_dispatch_as_host' bug.
memcpy: detected field-spanning write (size 56) of single field "&dg_info->msg"
at drivers/misc/vmw_vmci/vmci_datagram.c:237 (size 24)
WARNING: CPU: 0 PID: 1555 at drivers/misc/vmw_vmci/vmci_datagram.c:237
dg_dispatch_as_host+0x88e/0xa60 drivers/misc/vmw_vmci/vmci_datagram.c:237
Some code commentry, based on my understanding:
544 #define VMCI_DG_SIZE(_dg) (VMCI_DG_HEADERSIZE + (size_t)(_dg)->payload_size)
/// This is 24 + payload_size
memcpy(&dg_info->msg, dg, dg_size);
Destination = dg_info->msg ---> this is a 24 byte
structure(struct vmci_datagram)
Source = dg --> this is a 24 byte structure (struct vmci_datagram)
Size = dg_size = 24 + payload_size
{payload_size = 56-24 =32} -- Syzkaller managed to set payload_size to 32.
35 struct delayed_datagram_info {
36 struct datagram_entry *entry;
37 struct work_struct work;
38 bool in_dg_host_queue;
39 /* msg and msg_payload must be together. */
40 struct vmci_datagram msg;
41 u8 msg_payload[];
42 };
So those extra bytes of payload are copied into msg_payload[], a run time
warning is seen while fuzzing with Syzkaller.
One possible way to fix the warning is to split the memcpy() into
two parts -- one -- direct assignment of msg and second taking care of payload.
Gustavo quoted:
"Under FORTIFY_SOURCE we should not copy data across multiple members
in a structure."
Reported-by: syzkaller <syzkaller@googlegroups.com>
Suggested-by: Vegard Nossum <vegard.nossum@oracle.com>
Suggested-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240105164001.2129796-2-harshit.m.mogalapalli@oracle.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ac3e038407 upstream.
When not configured for wakeup lis3lv02d_i2c_suspend() will call
lis3lv02d_poweroff() even if the device has already been turned off
by the runtime-suspend handler and if configured for wakeup and
the device is runtime-suspended at this point then it is not turned
back on to serve as a wakeup source.
Before commit b1b9f7a494 ("misc: lis3lv02d_i2c: Add missing setting
of the reg_ctrl callback"), lis3lv02d_poweroff() failed to disable
the regulators which as a side effect made calling poweroff() twice ok.
Now that poweroff() correctly disables the regulators, doing this twice
triggers a WARN() in the regulator core:
unbalanced disables for regulator-dummy
WARNING: CPU: 1 PID: 92 at drivers/regulator/core.c:2999 _regulator_disable
...
Fix lis3lv02d_i2c_suspend() to not call poweroff() a second time if
already runtime-suspended and add a poweron() call when necessary to
make wakeup work.
lis3lv02d_i2c_resume() has similar issues, with an added weirness that
it always powers on the device if it is runtime suspended, after which
the first runtime-resume will call poweron() again, causing the enabled
count for the regulator to increase by 1 every suspend/resume. These
unbalanced regulator_enable() calls cause the regulator to never
be turned off and trigger the following WARN() on driver unbind:
WARNING: CPU: 1 PID: 1724 at drivers/regulator/core.c:2396 _regulator_put
Fix this by making lis3lv02d_i2c_resume() mirror the new suspend().
Fixes: b1b9f7a494 ("misc: lis3lv02d_i2c: Add missing setting of the reg_ctrl callback")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/regressions/5fc6da74-af0a-4aac-b4d5-a000b39a63a5@molgen.mpg.de/
Cc: stable@vger.kernel.org
Cc: regressions@lists.linux.dev
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> # Dell XPS 15 7590
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Link: https://lore.kernel.org/r/20240220190035.53402-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ac9762a74c ]
When probing the open-dice driver with PROVE_LOCKING=y, lockdep
complains that the mutex in 'drvdata->lock' has a non-static key:
| INFO: trying to register non-static key.
| The code is fine but needs lockdep annotation, or maybe
| you didn't initialize this object before use?
| turning off the locking correctness validator.
Fix the problem by initialising the mutex memory with mutex_init()
instead of __MUTEX_INITIALIZER().
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Brazdil <dbrazdil@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240126152410.10148-1-will@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a4e61de63e upstream.
In remoteproc shutdown sequence, rpmsg_remove will get called which
would depopulate all the child nodes that have been created during
rpmsg_probe. This would result in cb_remove call for all the context
banks for the remoteproc. In cb_remove function, session 0 is
getting skipped which is not correct as session 0 will never become
available again. Add changes to mark session 0 also as invalid.
Fixes: f6f9279f2b ("misc: fastrpc: Add Qualcomm fastrpc basic driver model")
Cc: stable <stable@kernel.org>
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Link: https://lore.kernel.org/r/20240108114833.20480-1-quic_ekangupt@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b1b9f7a494 ]
The lis3lv02d_i2c driver was missing a line to set the lis3_dev's
reg_ctrl callback.
lis3_reg_ctrl(on) is called from the init callback, but due to
the missing reg_ctrl callback the regulators where never turned off
again leading to the following oops/backtrace when detaching the driver:
[ 82.313527] ------------[ cut here ]------------
[ 82.313546] WARNING: CPU: 1 PID: 1724 at drivers/regulator/core.c:2396 _regulator_put+0x219/0x230
...
[ 82.313695] RIP: 0010:_regulator_put+0x219/0x230
...
[ 82.314767] Call Trace:
[ 82.314770] <TASK>
[ 82.314772] ? _regulator_put+0x219/0x230
[ 82.314777] ? __warn+0x81/0x170
[ 82.314784] ? _regulator_put+0x219/0x230
[ 82.314791] ? report_bug+0x18d/0x1c0
[ 82.314801] ? handle_bug+0x3c/0x80
[ 82.314806] ? exc_invalid_op+0x13/0x60
[ 82.314812] ? asm_exc_invalid_op+0x16/0x20
[ 82.314845] ? _regulator_put+0x219/0x230
[ 82.314857] regulator_bulk_free+0x39/0x60
[ 82.314865] i2c_device_remove+0x22/0xb0
Add the missing setting of the callback so that the regulators
properly get turned off again when not used.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231224183402.95640-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9f07790a4 ]
This function may copy the pad0 field of struct hl_info_sec_attest to user
mode which has not been initialized, resulting in leakage of kernel heap
data to user mode. To prevent this, use kzalloc() to allocate and zero out
the buffer, which can also eliminate other uninitialized holes, if any.
Fixes: 0c88760f8f ("habanalabs/gaudi2: add secured attestation info uapi")
Signed-off-by: Xingyuan Mo <hdthky0@gmail.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1c29d80134 upstream.
Metadata buffer is allocated during get_args for any remote call.
This buffer carries buffers, fdlists and other payload information
for the call. If the buffer is not reset, put_args might find some
garbage FDs in the fdlist which might have an existing mapping in
the list. This could result in improper freeing of FD map when DSP
might still be using the buffer. Added change to reset the metadata
buffer after allocation.
Fixes: 8f6c1d8c4f ("misc: fastrpc: Add fdlist implementation")
Cc: stable <stable@kernel.org>
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20231013122007.174464-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0e4cac5575 upstream.
commit 101bd907b4 ("misc: rtsx: judge ASPM Mode to set PETXCFG Reg")
some readers no longer force #CLKREQ to low
when the system need to enter ASPM.
But some platform maybe not implement complete ASPM?
it causes some platforms can not boot
Like in the past only the platform support L1ss we release the #CLKREQ.
Move the judgment (L1ss) to probe,
we think read config space one time when the driver start is enough
Fixes: 101bd907b4 ("misc: rtsx: judge ASPM Mode to set PETXCFG Reg")
Cc: stable <stable@kernel.org>
Reported-by: Paul Grandperrin <paul.grandperrin@gmail.com>
Signed-off-by: Ricky Wu <ricky_wu@realtek.com>
Tested-By: Jade Lovelace <lists@jade.fyi>
Link: https://lore.kernel.org/r/37b1afb997f14946a8784c73d1f9a4f5@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a2cb9cd6a3 ]
Scatterlist table is obtained during map create request and the same
table is used for DMA mapping unmap. In case there is any failure
while getting the sg_table, ERR_PTR is returned instead of sg_table.
When the map is getting freed, there is only a non-NULL check of
sg_table which will also be true in case failure was returned instead
of sg_table. This would result in improper unmap request. Add proper
check before setting map table to avoid bad unmap request.
Fixes: c68cfb718c ("misc: fastrpc: Add support for context Invoke method")
Cc: stable <stable@kernel.org>
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230811115643.38578-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8b9cea584 ]
Currently upon a heartbeat failure, we don't know if the failure
is due to firmware hang or due to a bad PCI link. Hence, we
are reading a PCI config space register with a known value (vendor ID)
so we will know which of the two possibilities caused the heartbeat
failure.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
