commit c7dd225bc2 upstream.
SW Steering uses RC QP for writing STEs to ICM. This writingis done in LB
(loopback), and FL (force-loopback) QP is preferred for performance. FL is
available when RoCE is enabled or disabled based on RoCE caps.
This patch adds reading of FL capability from HCA caps in addition to the
existing reading from RoCE caps, thus fixing the case where we didn't
have loopback enabled when RoCE was disabled.
Fixes: 7304d603a5 ("net/mlx5: DR, Add support for force-loopback QP")
Signed-off-by: Itamar Gozlan <igozlan@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1f0ae22ab4 ]
Fix SRIOV VST mode behavior to insert cvlan when a guest tag is already
present in the frame. Previous VST mode behavior was to drop packets or
override existing tag, depending on the device version.
In this patch we fix this behavior by correctly building the HW steering
rule with a push vlan action, or for older devices we ask the FW to stack
the vlan when a vlan is already present.
Fixes: 07bab95026 ("net/mlx5: E-Switch, Refactor eswitch ingress acl codes")
Fixes: dfcb1ed3c3 ("net/mlx5: E-Switch, Vport ingress/egress ACLs rules for VST mode")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3fc2a9e89b ]
ECE field should be after opt_param_mask in query qp output.
Fixes: 6b646a7e4a ("net/mlx5: Add ability to read and write ECE options")
Signed-off-by: Changcheng Liu <jerrliu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac77998b7a ]
According to HW spec the field "size" should be 16 bits
in bufferx register.
Fixes: e281682bf2 ("net/mlx5_core: HW data structs/types definitions cleanup")
Signed-off-by: Mohammad Kabat <mohammadkab@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eaee12f046 ]
This series introduces new packet merge type, therefore rename lro
functions to packet merge to support the new merge type:
- Generalize + rename mlx5e_build_tir_ctx_lro to
mlx5e_build_tir_ctx_packet_merge.
- Rename mlx5e_modify_tirs_lro to mlx5e_modify_tirs_packet_merge.
- Rename lro bit in mlx5_ifc_modify_tir_bitmask_bits to packet_merge.
- Rename lro_en in mlx5e_params to packet_merge_type type and combine
packet_merge params into one struct mlx5e_packet_merge_param.
Signed-off-by: Khalid Manaa <khalidm@nvidia.com>
Signed-off-by: Ben Ben-Ishay <benishay@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 50f477fe99 ]
TIR stands for transport interface receive, the TIR object is
responsible for performing all transport related operations on
the receive side like packet processing, demultiplexing the packets
to different RQ's, etc.
lro_timeout is a field in the TIR that is used to set the timeout for lro
session, this series introduces new packet merge type, therefore rename
lro_timeout to packet_merge_timeout for all packet merge types.
Signed-off-by: Ben Ben-Ishay <benishay@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d7751d6476 ]
E-Switch encap mode is relevant only when in switchdev mode.
The RDMA driver can query the encap configuration via
mlx5_eswitch_get_encap_mode(). Make sure it returns the currently
used mode and not the set one.
This reverts the cited commit which reset the encap mode
on entering switchdev and fixes the original issue properly.
Fixes: 9a64144d68 ("net/mlx5: E-Switch, Fix default encap mode")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Both multipath and bonding events are changing the HW LAG state
independently.
Handling one of the features events while the other is already
enabled can cause unwanted behavior, for example handling
bonding event while multipath enabled will disable the lag and
cause multipath to stop working.
Fix it by ignoring bonding event while in multipath and ignoring FIB
events while in bonding mode.
Fixes: 544fe7c2e6 ("net/mlx5e: Activate HW multipath and handle port affinity based on FIB events")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Due to current HW arch limitations, RX-FCS (scattering FCS frame field
to software) and RX-port-timestamp (improved timestamp accuracy on the
receive side) can't work together.
RX-port-timestamp is not controlled by the user and it is enabled by
default when supported by the HW/FW.
This patch sets RX-port-timestamp opposite to RX-FCS configuration.
Fixes: 102722fc68 ("net/mlx5e: Add support for RXFCS feature flag")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Extend eswitch API with rate limiting groups:
- Define new struct mlx5_esw_rate_group that is used to hold all
internal group data.
- Implement functions that allow creation, destruction and cleanup of
groups.
- Assign all vports to internal unlimited zero group by default.
This commit lays the groundwork for group rate limiting by implementing
devlink_ops->rate_node_{new|del}() callbacks to support creating and
deleting groups through devlink rate node objects. APIs that allows
setting rates and adding/removing members are implemented in following
patches.
Co-developed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Huy Nguyen <huyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Pull virtio fixes from Michael Tsirkin:
"Fixes in virtio, vhost, and vdpa drivers"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vdpa/mlx5: Fix queue type selection logic
vdpa/mlx5: Avoid destroying MR on empty iotlb
tools/virtio: fix build
virtio_ring: pull in spinlock header
vringh: pull in spinlock header
virtio-blk: Add validation for block size in config space
vringh: Use wiov->used to check for read/write desc order
virtio_vdpa: reject invalid vq indices
vdpa: Add documentation for vdpa_alloc_device() macro
vDPA/ifcvf: Fix return value check for vdpa_alloc_device()
vp_vdpa: Fix return value check for vdpa_alloc_device()
vdpa_sim: Fix return value check for vdpa_alloc_device()
vhost: Fix the calculation in vhost_overflow()
vhost-vdpa: Fix integer overflow in vhost_vdpa_process_iotlb_update()
virtio_pci: Support surprise removal of virtio pci device
virtio: Protect vqs list access
virtio: Keep vring_del_virtqueue() mirror of VQ create
virtio: Improve vq->broken access to avoid any compiler optimization
Currently mlx5_core_dev contains array of capabilities. It contains 19
valid capabilities of the device, 2 reserved entries and 12 holes.
Due to this for 14 unused entries, mlx5_core_dev allocates 14 * 8K = 112K
bytes of memory which is never used. Due to this mlx5_core_dev structure
size is 270Kbytes odd. This allocation further aligns to next power of 2
to 512Kbytes.
By skipping non-existent entries,
(a) 112Kbyte is saved,
(b) mlx5_core_dev reduces to 8KB with alignment
(c) 350KB saved in alignment
In future individual capability allocation can be used to skip its
allocation when such capability is disabled at the device level. This
patch prepares mlx5_core_dev to hold capability using a pointer instead
of inline array.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In the current code, the current and maximal capabilities are
maintained in separate arrays which are both per type. In order to
allow the creation of such a basic structure as a dynamically
allocated array, we move curr and max fields to a unified
structure so that specific capabilities can be allocated as one unit.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
New mlx5_core device structure is allocated through devlink_alloc
with\ kzalloc and that ensures that all fields are equal to zero
and it includes ->state too.
That means that checks of that field in the mlx5_init_one() is
completely redundant, because that function is called only once
in the begging of mlx5_core_dev lifetime.
PCI:
.probe()
-> probe_one()
-> mlx5_init_one()
The recovery flow can't run at that time or before it, because relevant
work initialized later in mlx5_init_once().
Such initialization flow ensures that dev->state can't be
MLX5_DEVICE_STATE_UNINITIALIZED at all, so remove such impossible
checks.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
get_queue_type() comments that splict virtqueue is preferred, however,
the actual logic preferred packed virtqueues. Since firmware has not
supported packed virtqueues we ended up using split virtqueues as was
desired.
Since we do not advertise support for packed virtqueues, we add a check
to verify split virtqueues are indeed supported.
Fixes: 1a86b377aa ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210811053759.66752-1-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Saeed Mahameed says:
====================
pull-request: mlx5-next 2020-08-9
This pulls mlx5-next branch which includes patches already reviewed on
net-next and rdma mailing lists.
1) mlx5 single E-Switch FDB for lag
2) IB/mlx5: Rename is_apu_thread_cq function to is_apu_cq
3) Add DCS caps & fields support
[1] https://patchwork.kernel.org/project/netdevbpf/cover/20210803231959.26513-1-saeed@kernel.org/
[2] 0e3364dab7.1626609184.git.leonro@nvidia.com/
[3] 55e1d69bef.1624258894.git.leonro@nvidia.com/
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Lag, Create shared FDB when in switchdev mode
net/mlx5: E-Switch, add logic to enable shared FDB
net/mlx5: Lag, move lag destruction to a workqueue
net/mlx5: Lag, properly lock eswitch if needed
net/mlx5: Add send to vport rules on paired device
net/mlx5: E-Switch, Add event callback for representors
net/mlx5e: Use shared mappings for restoring from metadata
net/mlx5e: Add an option to create a shared mapping
net/mlx5: E-Switch, set flow source for send to uplink rule
RDMA/mlx5: Add shared FDB support
{net, RDMA}/mlx5: Extend send to vport rules
RDMA/mlx5: Fill port info based on the relevant eswitch
net/mlx5: Lag, add initial logic for shared FDB
net/mlx5: Return mdev from eswitch
IB/mlx5: Rename is_apu_thread_cq function to is_apu_cq
net/mlx5: Add DCS caps & fields support
====================
Link: https://lore.kernel.org/r/20210809202522.316930-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The CQ destroy is performed based on the IRQ number that is stored in
cq->irqn. That number wasn't set explicitly during CQ creation and as
expected some of the API users of mlx5_core_create_cq() forgot to update
it.
This caused to wrong synchronization call of the wrong IRQ with a number
0 instead of the real one.
As a fix, set the IRQ number directly in the mlx5_core_create_cq() and
update all users accordingly.
Fixes: 1a86b377aa ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Fixes: ef1659ade3 ("IB/mlx5: Add DEVX support for CQ events")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
This callback will allow to notify representors about relevant events
when in OFFLOADS mode. In downstream patches, this will be used to notify
about PAIR/UNPAIR devcom events.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In shared FDB there is only one eswitch which is active and it receives
traffic from all representors and all vports in the HCA.
While the Ethernet representor will always reside on its native PF
the IB representor will not. Extend send to vport rule creation to
support such flows. Need to account for source vport that sends the
traffic (on which the representors resides) and the target eswitch
the traffic which reach.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
As shared FDB requires changes in two subsystems first expose the needed
core functions so the RDMA side can be changed.
mlx5_lag_is_master(): return true if a given mlx5 device is the lag master.
mlx5_lag_is_shared_fdb(): Returns true if the lag mode is shared FDB.
mlx5_lag_get_peer_mdev(): Return the peer mdev in lag.
The mentioned functions will be used by downstream patches in order
to add support for shared FDB for the RDMA side.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Export a function so users can retrieve the mellanox device that manages
the eswitch from the eswitch device.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Now that TTC logic is not dependent on mlx5e structs, move it to
lib/fs_ttc.c so it could be used other part of the mlx5 driver.
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
This commit does a cleanup in LRO configuration.
LRO is a parameter of an RQ, but its state is changed by modifying a TIR
related to the RQ.
The current status: LRO for tunneled packets is not supported in the
driver, inner TIRs may enable LRO on creation, but LRO status of inner
TIRs isn't changed in mlx5e_modify_tirs_lro(). This is inconsistent, but
as long as the firmware doesn't declare support for tunneled LRO, it
works, because the same RQs are shared between the inner and outer TIRs.
This commit does two fixes:
1. If the firmware has the tunneled LRO capability, LRO is blocked
altogether, because it's not possible to block it for inner TIRs only,
when the same RQs are shared between inner and outer TIRs, and the
driver won't be able to handle tunneled LRO traffic.
2. mlx5e_modify_tirs_lro() is patched to modify LRO state for all TIRs,
including inner ones, because all TIRs related to an RQ should agree on
their LRO state.
Fixes: 7b3722fa9e ("net/mlx5e: Support RSS for GRE tunneled packets")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
is_apu_thread_cq() used to detect CQs which are attached to APU
threads. This was extended to support other elements as well,
so the function was renamed to is_apu_cq().
c_eqn_or_apu_element was extended from 8 bits to 32 bits, which wan't
reflected when the APU support was first introduced.
Acked-by: Michael S. Tsirkin <mst@redhat.com> # vdpa
Signed-off-by: Tal Gilboa <talgi@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
This fields will be needed when adding a support for DCS offload
max_dci_stream_channels - maximum DCI stream channels supported per DCI.
max_dci_errored_streams - maximum DCI error stream channels
supported per DCI before a DCI move to error state.
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Currently all resources must be created with uid != 0 which is essential
when userspace processes are allocating virtquueue resources. Since this
is a kernel implementation, it is perfectly legal to open resources with
uid == 0.
In case firmware supports, avoid allocating user context.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210531160404.31368-1-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Pull rdma updates from Jason Gunthorpe:
"This contains a replacement driver for Intel iWarp hardware. This new
driver supports the old ethernet hardware and also newer chips that
can do ROCE.
Other than that, this contains the typical mix of patches:
- Driver updates and cleanups for bnxt_re, cxgb4, mlx4, and mlx5
- Many static checker driven code clean ups, including a wide
refcount_t conversion
- Several series for the hns driver, more HIP09 HW capabilities,
migration to new HW register manipulators, and code cleanups
- Minor fixes and improvements in srp, rts, and cm
- Improvements throughout for sysfs related code to use
DEVICE_ATTR_*, make the ib_port sysfs first-class, and overall use
sysfs APIs properly
- Intel's new irdma driver replacing i40iw
- rxe general clean ups and Memory Window support"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (211 commits)
RDMA/core: Always release restrack object
RDMA/mlx5: Don't access NULL-cleared mpi pointer
RDMA/irdma: Fix potential overflow expression in irdma_prm_get_pbles
RDMA/irdma: Check contents of user-space irdma_mem_reg_req object
RDMA/rxe: Missing unlock on error in get_srq_wqe()
RDMA/cma: Fix rdma_resolve_route() memory leak
RDMA/core/sa_query: Remove unused argument
RDMA/cma: Fix incorrect Packet Lifetime calculation
RDMA/cma: Protect RMW with qp_mutex
RDMA/cma: Remove unnecessary INIT->INIT transition
RDMA/hns: Add window selection field of congestion control
RDMA/hfi1: Remove use of kmap()
RDMA/irdma: Remove use of kmap()
RDMA/bnxt_re: Fix uninitialized struct bit field rsvd1
IB/isert: Align target max I/O size to initiator size
RDMA/hns: Fix incorrect vlan enable bit in QPC
MAINTAINERS: Update Broadcom RDMA maintainers
RDMA/irdma: Use the queried port attributes
RDMA/rxe: Fix redundant skb_put_zero
RDMA/rxe: Fix extra copy in prepare_ack_packet
...
Aharon Landau says:
====================
In case device supports only real-time timestamp, the kernel will fail to
create QP despite rdma-core requested such timestamp type.
It is because device returns free-running timestamp, and the conversion
from free-running to real-time is performed in the user space.
This series fixes it, by returning real-time timestamp.
====================
* mlx5_realtime_ts:
RDMA/mlx5: Support real-time timestamp directly from the device
RDMA/mlx5: Refactor get_ts_format functions to simplify code
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
QPC, SQC and RQC timestamp formats and capabilities are always equal
because they represent general hardware support. So instead of code
duplication, let's merge them into general enum and logic.
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Trivial conflicts in net/can/isotp.c and
tools/testing/selftests/net/mptcp/mptcp_connect.sh
scaled_ppm_to_ppb() was moved from drivers/ptp/ptp_clock.c
to include/linux/ptp_clock_kernel.h in -next so re-apply
the fix there.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Running devlink reload command for port in switchdev mode cause
resources to corrupt: driver can't release allocated EQ and reclaim
memory pages, because "rdma" auxiliary device had add CQs which blocks
EQ from deletion.
Erroneous sequence happens during reload-down phase, and is following:
1. detach device - suspends auxiliary devices which support it, destroys
others. During this step "eth-rep" and "rdma-rep" are destroyed,
"eth" - suspended.
2. disable SRIOV - moves device to legacy mode; as part of disablement -
rescans drivers. This step adds "rdma" auxiliary device.
3. destroy EQ table - <failure>.
Driver shouldn't create any device during unload flows. To handle that
implement MLX5_PRIV_FLAGS_DETACH flag, set it on device detach and unset
on device attach. If flag is set do no-op on drivers rescan.
Fixes: a925b5e309 ("net/mlx5: Register mlx5 devices to auxiliary virtual bus")
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
FW is now supporting more than 256 MSI-X per PF (up to 2K).
Hence, enlarge interrupt field in CREATE_EQ to make use of the new
MSI-X's.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The users of EQ are running their code on different CPUs and with
various affinity patterns. Move the cpumask setting close to their
actual usage.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Create new files bridge.{c|h} in en/rep directory that implement bridge
interaction with representor netdevices and handle required
events/notifications, bridge.{c|h} in esw directory that implement all
necessary eswitch offloading infrastructure and works on vport/eswitch
level. Provide new kconfig MLX5_BRIDGE which is automatically selected when
both kernel bridge and mlx5 eswitch configs are enabled.
Provide basic infrastructure for bridge offloads:
- struct mlx5_esw_bridge_offloads - per-eswitch bridge offload structure
that encapsulates generic bridge-offloads data (notifier blocks, ingress
flow table/group, etc.) that is created/deleted on enable/disable eswitch
offloads.
- struct mlx5_esw_bridge - per-bridge structure that encapsulates
per-bridge data (reference counter, FDB, egress flow table/group, etc.)
that is created when first eswitch represetor is attached to new bridge and
deleted when last representor is removed from the bridge as a result of
NETDEV_CHANGEUPPER event.
The bridge tables are created with new priority FDB_BR_OFFLOAD in FDB
namespace. The new priority is between tc-miss and slow path priorities.
Priority consist of two levels: the ingress table that is global per
eswitch and matches incoming packets by src_mac/vid and redirects them to
next level (egress table) that is chosen according to ingress port bridge
membership and matches on dst_mac/vid in order to redirect packet to vport
according to the following diagram:
+
|
+---------v----------+
| |
| FDB_TC_OFFLOAD |
| |
+---------+----------+
|
|
+---------v----------+
| |
| FDB_FT_OFFLOAD |
| |
+---------+----------+
|
|
+---------v----------+
| |
| FDB_TC_MISS |
| |
+---------+----------+
|
+--------------------------------------+
| | |
| +------+ |
| | |
| +------v--------+ FDB_BR_OFFLOAD |
| | INGRESS_TABLE | |
| +------+---+----+ |
| | | match |
| | +---------+ |
| | | | +-------+
| | +-------v-------+ match | | |
| | | EGRESS_TABLE +------------> vport |
| | +-------+-------+ | | |
| | | | +-------+
| | miss | |
| +------+------+ |
| | |
+--------------------------------------+
|
|
+---------v----------+
| |
| FDB_SLOW_PATH |
| |
+---------+----------+
|
v
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In order to adhere to kernel software datapath model bridge offloads must
come after TC and NF FDBs. Following patches in this series add new FDB
priority for bridge after FDB_FT_OFFLOAD. However, since netfilter offload
is implemented with unmanaged tables, its miss path is not automatically
connected to next priority and requires the code to manually connect with
slow table. To keep bridge offloads encapsulated and not mix it with
eswitch offloads, create a new FDB_TC_MISS priority between FDB_FT_OFFLOAD
and FDB_SLOW_PATH:
+
|
+---------v----------+
| |
| FDB_TC_OFFLOAD |
| |
+---------+----------+
|
|
|
+---------v----------+
| |
| FDB_FT_OFFLOAD |
| |
+---------+----------+
|
|
|
+---------v----------+
| |
| FDB_TC_MISS |
| |
+---------+----------+
|
|
|
+---------v----------+
| |
| FDB_SLOW_PATH |
| |
+---------+----------+
|
v
Initialize the new priority with single default empty managed table and use
the table as TC/NF miss patch instead of slow table. This approach allows
bridge offloads to be created as new FDB namespace priority between
FDB_TC_MISS and FDB_SLOW_PATH without exposing its internal tables to any
other modules since miss path of managed TC-miss table is automatically
wired to next priority.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Adding new reformat context type (INSERT_HEADER) requires adding two new
parameters to reformat context - reformat_param_0 and reformat_param_1.
As defined by HW spec, these parameters have different meaning for
different reformat context type.
The first parameter (reformat_param_0) is not new to HW spec, but it
wasn't used by any of the supported reformats. The second parameter
(reformat_param_1) is new to the HW spec - it was added to allow
supporting INSERT_HEADER.
For NSERT_HEADER, reformat_param_0 indicates the header used to
reference the location of the inserted header, and reformat_param_1
indicates the offset of the inserted header from the reference point
defined by reformat_param_0.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add support for HCA caps 2 that contains capabilities for the new
insert/remove header actions.
Added the required definitions for supporting the new reformat type:
added packet reformat parameters, reformat anchors and definitions
to allow copy/set into the inserted EMD (Embedded MetaData) tag.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Flow table that contains flow pointing to multiple flow tables or multiple
TIRs must have a level lower than 64. In our case it applies to muli-
destination flow table.
Fix the level of the created table to comply with HW Spec definitions, and
still make sure that its level lower than SW-owned tables, so that it
would be possible to point from the multi-destination FW table to SW
tables.
Fixes: 34583beea4 ("net/mlx5: DR, Create multi-destination table for SW-steering use")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Saeed Mahameed says:
====================
mlx5-updates-2021-05-26
Misc update for mlx5 driver,
1) Clean up patches for lag and SF
2) Reserve bit 31 in steering register C1 for IPSec offload usage
3) Move steering tables pool logic into the steering core and
increase the maximum table size to 2G entries when software steering
is enabled.
* tag 'mlx5-updates-2021-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Fix lag port remapping logic
net/mlx5: Use boolean arithmetic to evaluate roce_lag
net/mlx5: Remove unnecessary spin lock protection
net/mlx5: Cap the maximum flow group size to 16M entries
net/mlx5: DR, Set max table size to 2G entries
net/mlx5: Move chains ft pool to be used by all firmware steering
net/mlx5: Move table size calculation to steering cmd layer
net/mlx5: Add case for FS_FT_NIC_TX FT in MLX5_CAP_FLOWTABLE_TYPE
net/mlx5: DR, Remove unused field of send_ring struct
net/mlx5e: RX, Remove unnecessary check in RX CQE compression handling
net/mlx5e: IPsec/rep_tc: Fix rep_tc_update_skb drops IPsec packet
net/mlx5e: TC: Reserved bit 31 of REG_C1 for IPsec offload
net/mlx5e: TC: Use bit counts for register mapping
net/mlx5: CT: Avoid reusing modify header context for natted entries
net/mlx5e: CT, Remove newline from ct_dbg call
====================
Link: https://lore.kernel.org/r/20210527185624.694304-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Firmware FT pool is per device, but the software tracking of this pool
only services fs_chains users, and if another layer takes a flow table,
the pool will not be updated, and fs_chains will fail creating a flow
table, with no recovery till the flow table is returned.
Move FT pool to be global per device, and stored at the cmd level,
so all layers can use it.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Currently ASAP features fully utilize all the bits of the CQE's flow tag
and ft_metadata field. The flow tag field cannot be used because the
flow table tagging in FTE does not allow partial write.
We agree to reserve bit 31 of CQE's ft_metadata for IPsec to avoid
ASAP CT from dropping IPsec offloaded packet
Here is the new bit layout of REG_C1. Tunnel option id is reduced to
11 bits:
< IPSEC MARKER (1) | ESW_TUN_ID(12) | ESW_TUN_OPTS(11) | ESW_ZONE_ID(8) >
Signed-off-by: Huy Nguyen <huyn@nvidia.com>
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Paul Blakey <paulb@nvidia.com>
