Pull networking updates from Jakub Kicinski:
"One of the 'small improvements all over the place' releases for us.
It's hard to draw any direct comparisons because summer vacations
disrupted our patch processing (and presumably - generation) quite a
bit.
Quick and dirty count suggests we (Paolo and I) merged a very similar
number of net (632) and net-next (648) patches. This is not telling
the full story either because 1/3 to 1/2 of the net-next patches also
*seem* like AI-driven low priority fixes, cleanups and clarifications.
We are completely overwhelmed, of course. The glimmer of hope is that
we secured sufficient LLM budget and access (thank you Meta!) to run
reviews with multiple frontier models on each patch. This eliminates
some hallucinations. That said, in terms of review, the LLMs can only
do so much.
The sad truth is that our APIs (especially for rare events like PCIe
errors, timeouts etc) have always been racy, and now LLMs don't let us
ignore that. I expect our direction for the next release will be to
tweak the reviews a little bit more, but start shifting focus to
letting the LLMs take care of the busy work - managing patchwork,
automating common process complaints, editing commit messages, and
maybe applying patches which already got "reviewed-by" tags from
people we trust...
Core & protocols:
- A few steps lowering rtnl_lock dependence:
- per-netns netdev unregistration for select SW drivers (e.g.
veth, ipvlan, tunnels)
- rtnl_lock-less FIB rule changes (RTM_NEWRULE and RTM_DELRULE)
- prepare software drivers and TC qdiscs for rtnl_lock-less GET
- Support BIG TCP (>64kB TSO) in UDP tunnels (vxlan, geneve)
- Support buffers larger than PAGE_SIZE in devmem zero-copy API
- Improve MPTCP handling of extreme memory pressure handling, when
out-of-order queue had to be pruned
- Report the per-group user count via RTM_GETMULTICAST
- Expose the route deletion reason in RTM_DELROUTE
- Add a SO_RIGHTS_NOTRUNC option to UNIX sockets to enable more
useful handling of LSM denials when receiving SCM_RIGHTS messages:
instead of truncating the message at the first blocked fd, keep
every fd slot and store the LSM errno in the blocked slot
- IPv6 Segment Routing - support looking up the post-encap SID
(address) in a different/specified routing table
- Support PRP RedBox (interlink) creation
- Support per-nexthop UDP dst port in VXLAN
- Continue converting getsockopt callbacks in a number of protocols
to iov_iter
Ethernet:
- Merge initial CXL support for AMD/Solarflare NICs (shared branch
with the CXL tree)
- New drivers:
- ADIN1140 10BASE-T1S MACPHY
- Initial skeleton of Intel iXD and ZTE Dinghai drivers
- High-speed NICs:
- AMD/Pensando:
- support firmware flashing
- Cisco (enic):
- SR-IOV V2 admin channel and MBOX protocol
- Huawei (hns3):
- support for ethtool pfc_prevention_tout
- nVidia/Mellanox:
- support sharing bandwidth control across interfaces
of the same device
- Marvell (octeontx2-pf):
- link RQ page pools to netdev for Netlink stats
- Google vNIC:
- XDP metadata support for DQ RDA
- Microsoft vNIC:
- support forcing full-page RX buffers
- Other NICs:
- Synopsys IP:
- eic7700: support for eth1
- Microchip (lan743x):
- support for RMII interface
- Wangxun:
- support for ethtool -G and -C for VFs
- add Tx timeout and PCIe error handling
- Intel (igb/igc):
- RSS key get/set support
- support for forcing link speed without auto-negotiation
- Switches:
- NXP (dpaa2):
- support bonding/LAG offload
- Mediatek:
- mt7530: EN7528 support
- initial support for MT7628
- Micrel (ksz8/9):
- refactoring work to move towards library model
- PTP support for KSZ8463
- nVidia/Mellanox:
- support rtnl-lock-less ethtool callbacks
- Realtek:
- rtl8366rb: use generic RTL83xx code
- support SGMII and HSGMII for RTL8367S
- PHYs:
- Airoha:
- EcoNet EN7528 PHY support
- DAPU Telecom
- DAPU Telecom DAP8211R(I) Gigabit PHY support
- Realtek:
- support RTL8261C_CG
- support RTL8261D
Wireless:
- nl80211: per-link statistics support for multi-link operation
- mac80211: AQL/airtime-fairness support for multicast
- Merge Peripheral Authentication Service (PAS) / TEE support for
ath12k (shared branch with the firmware/qcom tree)
- New drivers:
- mm81x for Morse Micro Long-Range S1G devices
- nxpwifi for NXP devices (mostly forked off from mwifiex)
- Driver changes:
- Broadcom (brcmfmac):
- DPP support, some Cypress part update
- MediaTek (mt76):
- mt7928 support
- mt7925 NAN support
- mt7996 AP powersave improvements
- Qualcomm (ath12k):
- much kernel infrastructure integration work
- AHB platform MultiPD support
- Realtek (rt89):
- LED support
- RTL8922DE support
- dual-BT coex for RTL8922D
- Intel:
- new FW version support
Bluetooth:
- HCI: add support for Shorter Connection Interval (SCI) feature
- af_bluetooth: add minimal context analysis annotations
- Driver changes:
- Intel:
- add Bluetooth SAR revision 2 support
- add vendor_reset PCI sysfs for PLDR
- Mediatek:
- add USB IDs for MT7902 and MT7922 devices
- Realtek:
- add USB IDs for 8761CU and 8852BE devices
- NXP:
- add M.2 Bluetooth device support using pwrseq
Misc:
- DPLL support for manual/numerical oscillator control (NCO)
(implement in zl3073x)
- MCTP support for MCTP over USB v1.1 (DMTF DSP0283)
- Power-over-Ethernet: support Realtek PSE controllers
- Remove the IBM EHEA driver
- Remove tulip/xircom_cb driver"
* tag 'net-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1433 commits)
net/mlx5e: do not HW-GRO coalesce small frames
net: openvswitch: fix nf_connlabels leak in ovs_ct_init
net: add missing ref_tracker_dir_exit() to alloc_netdev_mqs()
net: openvswitch: fix flow mask use-after-free on flow deletion
sctp: stop processing a packet once its association is deleted
dpll: zl3073x: add PTP clock support
dpll: zl3073x: add channel ToD, phase step and TIE operations
dpll: zl3073x: scale poll interval proportionally to timeout
ptp: vmclock: prevent read-only mappings from becoming writable
ipv4: reject undersized MTUs in ip_do_fragment()
bonding: initialize err for empty target lists
net: dsa: initial support for MT7628 embedded switch
net: dsa: initial MT7628 tagging driver
net: phy: mediatek: add phy driver for MT7628 built-in Fast Ethernet PHYs
dt-bindings: net: dsa: add MT7628 ESW
net: pse-pd: realtek-pse-mcu: add UART transport
net: pse-pd: realtek-pse-mcu: add I2C transport
net: pse-pd: add Realtek PSE MCU core
dt-bindings: net: pse-pd: add bindings for Realtek PSE MCU
vsock: use sock_error() to consume sk_err after a failed connect
...
FSL SOC Changes for 7.3
Freescale QUICC Engine:
- Use generic I/O helpers in interrupt controller for IO Ports
- Move CONFIG_QE_GPIO out of powerpc
- Fix DT scan for GPIO nodes
- Convert IO ports interrupt controller to generic IRQ chip
- Add support of IRQs in GPIO controller
- Implement get_direction() in GPIO controller
- Check platform_driver_register() in interrupt controller for IO Ports
Data Path I/O:
- Replace maintainer
- Remove redundant dev_err()
- Fix kernel-doc typos
Freescale Management Complex:
- Use strscpy() to copy strings into arrays
- Remove redundant dev_err()
- Drop unused assignment of acpi_device_id::driver_data
Other changes:
- Add kernel and device tree binding support for RCW override,
completing the SerDes PHY driver functionality
- Fix kernel-doc warnings and typos in DPAA header
* tag 'soc_fsl-7.3-1' of https://git.kernel.org/pub/scm/linux/kernel/git/chleroy/linux: (31 commits)
bus: fsl-mc: drop unused assignment of acpi_device_id::driver_data
soc: fsl: qe: check platform_driver_register() in qe_ic_of_init()
phy: lynx-10g: use RCW override procedure for dynamic protocol change
soc: fsl: guts: implement the RCW override procedure
dt-bindings: fsl: layerscape-dcfg: define DCFG_DCSR region
soc: fsl: guts: make fsl_soc_data available after fsl_guts_init()
soc: fsl: guts: make it easier to determine on which SoC we are running
soc: fsl: guts: add a central fsl_guts_read() function
soc: fsl: guts: add a global structure to hold state
soc: fsl: guts: use a macro to encode the DCFG CCSR space
soc: fsl: guts: perform fsl_guts_init() error teardown in reverse order of setup
soc: fsl: dpio: fix kernel-doc typos
soc: fsl: fix kernel-doc warnings and typos
bus: fsl-mc: Remove redundant dev_err()
soc: fsl: qe: Add support of IRQs in QE GPIO
soc: fsl: qe: Rename irq variable to parent_irq
soc: fsl: qe: Convert to generic IRQ chip
soc: fsl: qe: Handle spurious interrupts
soc: fsl: qe: Iterate over all pending interrupts in cascade handler
soc: fsl: qe: Use generic_handle_domain_irq()
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add support for the RCW override procedure which enables runtime
reconfiguration of the protocol running on a SerDes lane. The procedure
is done through the DCFG DCSR space which now can be defined as the
second memory region of the guts DT node.
Support is added on the following SoCs: LS1046A, LS1088A, LS2088A.
The procedure is exported to the "client" driver - the Lynx10G SerDes
PHY driver - through the following functions:
- fsl_guts_lane_validate() used to validate that changing the protocol
on a specific lane is supported.
- fsl_guts_lane_set_mode() which can be used to request the RCW
procedure be executed for a specific lane.
Since the RCW override procedure is different depending on the SoC, the
private fsl_soc_data structure is updated with two new per SoC callbacks
(.serdes_get_rcw_override() and .serdes_init_rcwcr()) which get used
from the generic fsl_guts_lane_set_mode() function. These two callbacks
hide all the SoC specific register offsets, masks and values so that the
_set_mode() procedure is straightforward.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20260721231603.67865-9-vladimir.oltean@nxp.com
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Replace the counter-based MAFT entry tracking (num_mfe/mac_filter_num)
with a bitmap (maft_eid_bitmap) stored in struct ntmp_user, which is a
more appropriate place for NTMP resource management.
The bitmap approach brings two improvements. First, the entry deletion
in enetc4_pf_clear_maft_entries() now checks the return value of
ntmp_maft_delete_entry() and only clears the corresponding bit on
success, keeping hardware and software state in sync. Previously, the
counter was reset unconditionally regardless of whether the hardware
deletion actually succeeded.
Second, entry allocation in enetc4_pf_add_maft_entries() uses
ntmp_lookup_free_eid() to find available IDs dynamically, with an
upfront capacity check via bitmap_weight() to avoid partial failures.
The MAFT entry count is moved into ntmp_user.maft_num_entries and
initialized once during enetc4_init_ntmp_user(). Helper functions
enetc4_ntmp_bitmap_init() and enetc4_ntmp_bitmap_free() manage the
bitmap lifetime. The debugfs show function is updated accordingly to
iterate over set bits under rtnl_lock().
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260720014317.1059359-5-wei.fang@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
<linux/mod_devicetable.h> is included in a many files:
$ git grep '<linux/mod_devicetable.h>' ef0c9f75a1 | wc -l
1598
; some of them are widely used headers. To stop mixing up different and
unrelated driver( type)s let the subsystem headers only use the subset
of the recently split <linux/mod_devicetable.h> that are relevant for
them.
The fallout (I hope) is addressed in the previous commits that handle
sources relying on e.g. <linux/i2c.h> pulling in the full legacy header
and thus providing pci_device_id.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://patch.msgid.link/199fe46b624ba07fb9bd3e0cd6ff13757932cb5f.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Pull SoC driver updates from Arnd Bergmann:
"There are a few added drivers, but mostly the normal maintenance to
drivers for firmware, memory controller and other soc specific
hardware:
- The NXP QuickEngine gets modern MSI support, which allows some
cleanups to the GICv3 irqchip chip driver
- A new SoC specific driver for the Renesas R-Car MFIS unit is added,
encapsulating support for the on-chip mailbox and hwspinlock
implementations that are not easily separated into individual
drivers
- The Qualcomm SoC drivers add support for additional SoC
implementations, and flexibility around power management for the
serial-engine driver as well as probing the LLCC driver using
custom hardware descriptions inside of the device itself.
- Added support for the Samsung thermal management unit
- A cleanup to the Tegra 'PMC' driver interfaces to remove legacy
APIs and allow multiple PMC instances everywhere.
- Updates to the TI SCI and KNAS drivers to improve suspend/resume
support.
- Minor driver changes for mediatek, xilinx, allwinner, aspeed,
tegra, broadcom, amd, microchip and starfive specific drivers
- Memory controller updates for Tegra and Renesas for additional SoC
types and other improvements.
- Firmware driver updates for Arm FF-A, SMCCC and SCMI interfaces, to
update driver probing, object lifetimes and address minor bugs"
* tag 'soc-drivers-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (189 commits)
Revert "firmware: zynqmp: Add dynamic CSU register discovery and sysfs interface"
Revert "Documentation: ABI: add sysfs interface for ZynqMP CSU registers"
memory: tegra234: drop dead NULL check in tegra234_mc_icc_aggregate()
memory: tegra264: drop redundant tegra264_mc_icc_aggregate()
memory: tegra186-emc: stop borrowing MC aggregate hook for EMC
soc: aspeed: cleanup dead default for ASPEED_SOCINFO
firmware: tegra: bpmp: Add support for multi-socket platforms
firmware: tegra: bpmp: Propagate debugfs errors
soc/tegra: pmc: Add Tegra238 support
soc/tegra: pmc: Restrict power-off handler to Nexus 7
soc/tegra: pmc: Populate powergate debugfs only when needed
soc/tegra: pmc: Move legacy code behind CONFIG_ARM guard
soc/tegra: pmc: Remove unused legacy functions
soc/tegra: pmc: Create PMC context dynamically
firmware: samsung: acpm: remove compile-testing stubs
firmware: samsung: acpm: Add devm_acpm_get_by_phandle helper
firmware: samsung: acpm: Add TMU protocol support
firmware: samsung: acpm: Make acpm_ops const and access via pointer
firmware: samsung: acpm: Drop redundant _ops suffix in acpm_ops members
firmware: samsung: acpm: Annotate rx_data->cmd with __counted_by_ptr
...
Implement the DSA .port_vlan_add and .port_vlan_del operations to enable
VLAN-aware bridge offloading on the NETC switch.
VLAN membership is maintained in the VLAN Filter Table (VFT). Adding the
first port to a VLAN creates a new VFT entry with hardware MAC learning
and flood-on-miss forwarding; subsequent ports update the existing
entry's membership bitmap. Removing the last port deletes the entry.
Egress tagging is handled through the Egress Treatment Table (ETT). Each
VLAN is allocated a group of ETT entries, one per available port. Ports
are assigned a sequential ett_offset during initialisation, used to
address each port's entry within the group. Untagged ports configure the
ETT to strip the outer VLAN tag; tagged ports pass frames through
unmodified. Each ETT group is optionally paired with an Egress Counter
Table (ECT) group for per-port frame counting, allocated on a best-effort
basis. When the egress rule of an ETT entry changes, the counter of the
corresponding ECT entry will be recounted to track the number of frames
that match the new egress rule.
A software shadow list serialised by vft_lock tracks active VLAN state
across both port membership and egress tagging. VID 0 is used for single
port mode and is ignored by both callbacks.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260611021458.2629145-8-wei.fang@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
NTMP index tables require software to allocate and manage entry IDs.
Add two bitmap helper functions to facilitate this management:
ntmp_lookup_free_eid(): finds the first zero bit in the given bitmap,
sets it to mark the entry as in-use, and returns the corresponding entry
ID. Returns NTMP_NULL_ENTRY_ID if no free entry is available.
ntmp_clear_eid_bitmap(): clears the bit associated with the given entry
ID in the bitmap to mark the entry as free. It is a no-op if the entry
ID is NTMP_NULL_ENTRY_ID.
Both functions are exported for use by other modules, such as the NETC
switch driver which needs to manage group index bitmaps for the Egress
Treatment Table (ETT) and Egress Count Table (ECT).
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260611021458.2629145-7-wei.fang@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Egress Treatment Table (ETT) and Egress Count Table (ECT) are both
index tables whose entry IDs are allocated by software. Every num_ports
entries form a group, where each entry in the group corresponds to one
port. To facilitate group allocation and management, initialize the group
index bitmaps for both tables based on hardware capabilities reported by
ETTCAPR and ECTCAPR registers.
The bitmap size per table is calculated as the total number of hardware
entries divided by the number of available ports, which gives the number
of groups available for software allocation. A set bit in the bitmap
represents a group index that has been allocated.
These bitmaps will be used by subsequent patches that add VLAN support.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260611021458.2629145-6-wei.fang@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The egress count table is a static bounded index table, egress related
statistics are maintained in this table. The table is implemented as a
linear array of entries accessed using an index (0, 1, 2, ..., n) that
uniquely identifies an entry within the array. Egress Counter Entry ID
(EC_EID) is used as an index to an entry in this table. The EC_EID is
specified in the egress treatment table.
Egress count table entries are always present and enabled. The table
only supports access via entry ID, which is assigned by the software.
And it supports Update, Query and Query followed by Update operations.
Currently, only Update operation is supported.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260611021458.2629145-5-wei.fang@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Each entry in the egress treatment table contains the egress packet
processing actions to be applied to a grouping or scope of packets
exiting on a particular egress port of the switch. A scope of packets,
for example, could be the packets exiting a particular VLAN, matching
a particular 802.1Q bridge forwarding entry or belonging to a stream
identified at ingress. The egress treatment table is implemented as a
linear array of entries accessed using an index (0,1, 2, ..., n) that
uniquely identifies an entry within the array.
The egress treatment table only supports access vid entry ID, which is
assigned by the software. It supports Add, Update, Delete and Query
operations. Note that only Query operation is not supported yet.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260611021458.2629145-4-wei.fang@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add two interfaces to manage entries in the VLAN filter table:
ntmp_vft_update_entry(): Update the configuration element data of the
specified VLAN filter entry based on the given VLAN ID. It uses the
exact key access method to locate the entry.
ntmp_vft_delete_entry(): Delete the VLAN filter entry corresponding to
the specified VLAN ID. It also uses the exact key access method to
identify the target entry.
In addition, introduce struct vft_req_qd to describe the request data
buffer format for Query and Delete actions of the VLAN filter table,
which contains a common request data header and a VLAN access key.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260611021458.2629145-3-wei.fang@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add three interfaces to manage dynamic entries in the FDB table:
ntmp_fdbt_update_activity_element(): Update the activity element of all
dynamic FDB entries. For each entry, if its activity flag is not set,
which means no packet has matched this entry since the last update, the
activity counter is incremented. Otherwise, both the activity flag and
activity counter are reset. The activity counter is used to track how
long an FDB entry has been inactive, which is useful for implementing
an ageing mechanism.
ntmp_fdbt_delete_ageing_entries(): Delete all dynamic FDB entries whose
activity flag is not set and whose activity counter is greater than or
equal to the specified threshold. This is used to remove stale entries
that have been inactive for too long.
ntmp_fdbt_delete_port_dynamic_entries(): Delete all dynamic FDB entries
associated with the specified switch port. This is typically called when
a port goes down or is removed from a bridge.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260611021458.2629145-2-wei.fang@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Each user port of the NETC switch supports 802.3 basic and mandatory
managed objects statistic counters and IETF Management Information
Database (MIB) package (RFC2665) and Remote Network Monitoring (RMON)
counters. And all of these counters are 64-bit registers. In addition,
some user ports support preemption, so these ports have two MACs, MAC
0 is the express MAC (eMAC), MAC 1 is the preemptible MAC (pMAC). So
for ports that support preemption, the statistics are the sum of the
pMAC and eMAC statistics.
Note that the current switch driver does not support preemption, all
frames are sent and received via the eMAC by default. The statistics
read from the pMAC should be zero.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-15-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The ingress port filter table (IPFT )contains a set of filters each
capable of classifying incoming traffic using a mix of L2, L3, and L4
parsed and arbitrary field data. As a result of a filter match, several
actions can be specified such as on whether to deny or allow a frame,
overriding internal QoS attributes associated with the frame and setting
parameters for the subsequent frame processing functions, such as stream
identification, policing, ingress mirroring. Each entry corresponds to a
filter. The ingress port filter entries are added using a precedence
value. If a frame matches multiple entries, the entry with the higher
precedence is used. Currently, this patch only adds "Add" and "Delete"
operations to the ingress port filter table. These two interfaces will
be used by both ENETC driver and NETC switch driver.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-8-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The buffer pool table contains buffer pool configuration and operational
information. Each entry corresponds to a buffer pool. The Entry ID value
represents the buffer pool ID to access.
The buffer pool table is a static bounded index table, buffer pools are
always present and enabled. It only supports Update and Query operations,
This patch only adds ntmp_bpt_update_entry() helper to support updating
the specified entry of the buffer pool table. Query action to the table
will be added in the future.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-7-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The VLAN filter table contains configuration and control information for
each VLAN configured on the switch. Each VLAN entry includes the VLAN
port membership, which FID to use in the FDB lookup, which spanning tree
group to use, the egress frame modification actions to apply to a frame
exiting form this VLAN, and various configuration and control parameters
for this VLAN.
The VLAN filter table can only be managed by the command BD ring using
table management protocol version 2.0. The table supports Add, Delete,
Update and Query operations. And the table supports 3 access methods:
Entry ID, Exact Match Key Element and Search. But currently we only add
the ntmp_vft_add_entry() helper to support the upcoming switch driver to
add an entry to the VLAN filter table. Other interfaces will be added in
the future.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-6-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The FDB table is used for MAC learning lookups and MAC forwarding lookups.
Each table entry includes information such as a FID and MAC address that
may be unicast or multicast and a forwarding destination field containing
a port bitmap identifying the associated port(s) with the MAC address.
FDB table entries can be static or dynamic. Static entries are added from
software whereby dynamic entries are added either by software or by the
hardware as MAC addresses are learned in the datapath.
The FDB table can only be managed by the command BD ring using table
management protocol version 2.0. Table management command operations Add,
Delete, Update and Query are supported. And the FDB table supports three
access methods: Entry ID, Exact Match Key Element and Search. This patch
adds the following basic supports to the FDB table.
ntmp_fdbt_update_entry() - update the configuration element data of a
specified FDB entry
ntmp_fdbt_delete_entry() - delete a specified FDB entry
ntmp_fdbt_add_entry() - add an entry into the FDB table
ntmp_fdbt_search_port_entry() - Search the FDB entry on the specified
port based on RESUME_ENTRY_ID.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-5-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
FSL SOC Changes for 7.1
Freescale QUICC Engine:
- Add missing cleanup on device removal and switch to irq_domain_create_linear()
in interrupt controller for IO Ports
- Panic on ioremap() failure in qe_reset()
Freescale Management Complex:
- Move fsl-mc over to device MSI infrastructure
- Wait for the MC firmware to complete its boot
Freescale Hypervisor:
- Fix header kernel-doc warnings
* tag 'soc_fsl-7.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/chleroy/linux:
bus: fsl-mc: wait for the MC firmware to complete its boot
soc: fsl: qe: panic on ioremap() failure in qe_reset()
soc: fsl: qe_ports_ic: switch to irq_domain_create_linear()
soc: fsl: qe_ports_ic: Add missing cleanup on device removal
virt: fsl_hypervisor: fix header kernel-doc warnings
platform-msi: Remove stale comment
fsl-mc: Remove legacy MSI implementation
fsl-mc: Switch over to per-device platform MSI
irqchip/gic-v3-its: Add fsl_mc device plumbing to the msi-parent handling
fsl-mc: Add minimal infrastructure to use platform MSI
fsl-mc: Remove MSI domain propagation to sub-devices
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The AI-generated review reported a potential DMA use-after-free issue
[1]. If netc_xmit_ntmp_cmd() times out and returns an error, the pending
command is not explicitly aborted, while ntmp_free_data_mem()
unconditionally frees the DMA buffer. If the buffer has already been
reallocated elsewhere, this may lead to silent memory corruption. Because
the hardware eventually processes the pending command and perform a DMA
write of the response to the physical address of the freed buffer.
To resolve this issue, this patch does the following modifications:
1. Convert cbdr->ring_lock from a spinlock to a mutex
The lock was originally a spinlock in case NTMP operations might be
invoked from atomic context. After downstream support for all NTMP
tables, no such usage has materialized. A mutex lock is now required
because the driver now needs to reclaim used BDs and release associated
DMA memory within the lock's context, while dma_free_coherent() might
sleep.
2. Introduce software command BD (struct netc_swcbd)
The hardware write-back overwrites the addr and len fields of the BD,
so the driver cannot rely on the hardware BD to free the associated DMA
memory. The driver now maintains a software shadow BD storing the DMA
buffer pointer, DMA address, and size. And netc_xmit_ntmp_cmd() only
reclaims older BDs when the number of used BDs reaches
NETC_CBDR_CLEAN_WORK (16). The software BD enables correct DMA memory
release. With this, struct ntmp_dma_buf and ntmp_free_data_mem() are no
longer needed and are removed.
3. Require callers to hold ring_lock across netc_xmit_ntmp_cmd()
netc_xmit_ntmp_cmd() releases the ring_lock before the caller finishes
consuming the response. At this point, if a concurrent thread submits
a new command, it may trigger ntmp_clean_cbdr() and free the DMA buffer
while it is still in use. Move ring_lock ownership to the caller to
ensure the response buffer cannot be reclaimed prematurely. So the
helpers ntmp_select_and_lock_cbdr() and ntmp_unlock_cbdr() are added.
These changes eliminate the DMA use-after-free condition and ensure safe
and consistent BD reclamation and DMA buffer lifecycle management.
Fixes: 4701073c3d ("net: enetc: add initial netc-lib driver to support NTMP")
Link: https://lore.kernel.org/netdev/20260403011729.1795413-1-kuba@kernel.org/ # [1]
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260415060833.2303846-3-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some NETC functionality is controlled using control messages sent to the
hardware using BD ring interface with 32B descriptor similar to transmit
BD ring used on ENETC. This BD ring interface is referred to as command
BD ring. It is used to configure functionality where the underlying
resources may be shared between different entities or being too large to
configure using direct registers. Therefore, a messaging protocol called
NETC Table Management Protocol (NTMP) is provided for exchanging
configuration and management information between the software and the
hardware using the command BD ring interface.
For the management protocol of LS1028A has been retroactively named NTMP
1.0, and its implementation is in enetc_cbdr.c and enetc_qos.c. However,
NTMP of i.MX95 has been upgraded to version 2.0, which is incompatible
with LS1028A, because the message formats have been changed. Therefore,
add the netc-lib driver to support NTMP 2.0 to operate various tables.
Note that, only MAC address filter table and RSS table are supported at
the moment. More tables will be supported in subsequent patches.
It is worth mentioning that the purpose of the netc-lib driver is to
provide some NTMP-based generic interfaces for ENETC and NETC Switch
drivers. Currently, it only supports the configurations of some tables.
Interfaces such as tc flower and debugfs will be added in the future.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250506080735.3444381-2-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The netc-blk-ctrl driver is used to configure Integrated Endpoint
Register Block (IERB) and Privileged Register Block (PRB) of NETC.
For i.MX platforms, it is also used to configure the NETCMIX block.
The IERB contains registers that are used for pre-boot initialization,
debug, and non-customer configuration. The PRB controls global reset
and global error handling for NETC. The NETCMIX block is mainly used
to set MII protocol and PCS protocol of the links, it also contains
settings for some other functions.
Note the IERB configuration registers can only be written after being
unlocked by PRB, otherwise, all write operations are inhibited. A warm
reset is performed when the IERB is unlocked, and it results in an FLR
to all NETC devices. Therefore, all NETC device drivers must be probed
or initialized after the warm reset is finished.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the build warnings when CONFIG_FSL_ENETC_MDIO is not enabled.
The detailed warnings are shown as follows.
include/linux/fsl/enetc_mdio.h:62:18: warning: no previous prototype for function 'enetc_hw_alloc' [-Wmissing-prototypes]
62 | struct enetc_hw *enetc_hw_alloc(struct device *dev, void __iomem *port_regs)
| ^
include/linux/fsl/enetc_mdio.h:62:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
62 | struct enetc_hw *enetc_hw_alloc(struct device *dev, void __iomem *port_regs)
| ^
| static
8 warnings generated.
Fixes: 6517798dd3 ("enetc: Make MDIO accessors more generic and export to include/linux/fsl")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410102136.jQHZOcS4-lkp@intel.com/
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241011030103.392362-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the match() callback, the struct device_driver * should not be
changed, so change the function callback to be a const *. This is one
step of many towards making the driver core safe to have struct
device_driver in read-only memory.
Because the match() callback is in all busses, all busses are modified
to handle this properly. This does entail switching some container_of()
calls to container_of_const() to properly handle the constant *.
For some busses, like PCI and USB and HV, the const * is cast away in
the match callback as those busses do want to modify those structures at
this point in time (they have a local lock in the driver structure.)
That will have to be changed in the future if they wish to have their
struct device * in read-only-memory.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Alex Elder <elder@kernel.org>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/2024070136-wrongdoer-busily-01e8@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The value returned by an fsl-mc driver's remove function is mostly
ignored. (Only an error message is printed if the value is non-zero
and then device removal continues unconditionally.)
So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # sanity checks
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Tested-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
1588 driver loses about 1us in adjtime operation at PTP slave
This is because adjtime operation uses a slow non-atomic tmr_cnt_read()
followed by tmr_cnt_write() operation.
In the above sequence, since the timer counter operation keeps
incrementing, it leads to latency. The tmr_offset register
(which is added to TMR_CNT_H/L register giving the current time)
must be programmed with the delta nanoseconds.
Signed-off-by: Nikhil Gupta <nikhil.gupta@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230119204034.7969-1-nikhil.gupta@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The enetc MDIO bus driver can perform both C22 and C45 transfers.
Create separate functions for each and register the C45 versions using
the new API calls where appropriate.
This driver is shared with the Felix DSA switch, so update that at the
same time.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull driver core updates from Greg KH:
"Here is the set of driver core changes for 5.19-rc1.
Lots of tiny driver core changes and cleanups happened this cycle, but
the two major things are:
- firmware_loader reorganization and additions including the ability
to have XZ compressed firmware images and the ability for userspace
to initiate the firmware load when it needs to, instead of being
always initiated by the kernel. FPGA devices specifically want this
ability to have their firmware changed over the lifetime of the
system boot, and this allows them to work without having to come up
with yet-another-custom-uapi interface for loading firmware for
them.
- physical location support added to sysfs so that devices that know
this information, can tell userspace where they are located in a
common way. Some ACPI devices already support this today, and more
bus types should support this in the future.
Smaller changes include:
- driver_override api cleanups and fixes
- error path cleanups and fixes
- get_abi script fixes
- deferred probe timeout changes.
It's that last change that I'm the most worried about. It has been
reported to cause boot problems for a number of systems, and I have a
tested patch series that resolves this issue. But I didn't get it
merged into my tree before 5.18-final came out, so it has not gotten
any linux-next testing.
I'll send the fixup patches (there are 2) as a follow-on series to this
pull request.
All have been tested in linux-next for weeks, with no reported issues
other than the above-mentioned boot time-outs"
* tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
driver core: fix deadlock in __device_attach
kernfs: Separate kernfs_pr_cont_buf and rename_lock.
topology: Remove unused cpu_cluster_mask()
driver core: Extend deferred probe timeout on driver registration
MAINTAINERS: add Russ Weight as a firmware loader maintainer
driver: base: fix UAF when driver_attach failed
test_firmware: fix end of loop test in upload_read_show()
driver core: location: Add "back" as a possible output for panel
driver core: location: Free struct acpi_pld_info *pld
driver core: Add "*" wildcard support to driver_async_probe cmdline param
driver core: location: Check for allocations failure
arch_topology: Trace the update thermal pressure
kernfs: Rename kernfs_put_open_node to kernfs_unlink_open_file.
export: fix string handling of namespace in EXPORT_SYMBOL_NS
rpmsg: use local 'dev' variable
rpmsg: Fix calling device_lock() on non-initialized device
firmware_loader: describe 'module' parameter of firmware_upload_register()
firmware_loader: Move definitions from sysfs_upload.h to sysfs.h
firmware_loader: Fix configs for sysfs split
selftests: firmware: Add firmware upload selftests
...
The devices on platform/amba/fsl-mc/PCI buses could be bound to drivers
with the device DMA managed by kernel drivers or user-space applications.
Unfortunately, multiple devices may be placed in the same IOMMU group
because they cannot be isolated from each other. The DMA on these devices
must either be entirely under kernel control or userspace control, never
a mixture. Otherwise the driver integrity is not guaranteed because they
could access each other through the peer-to-peer accesses which by-pass
the IOMMU protection.
This checks and sets the default DMA mode during driver binding, and
cleanups during driver unbinding. In the default mode, the device DMA is
managed by the device driver which handles DMA operations through the
kernel DMA APIs (see Documentation/core-api/dma-api.rst).
For cases where the devices are assigned for userspace control through the
userspace driver framework(i.e. VFIO), the drivers(for example, vfio_pci/
vfio_platfrom etc.) may set a new flag (driver_managed_dma) to skip this
default setting in the assumption that the drivers know what they are
doing with the device DMA.
Calling iommu_device_use_default_domain() before {of,acpi}_dma_configure
is currently a problem. As things stand, the IOMMU driver ignored the
initial iommu_probe_device() call when the device was added, since at
that point it had no fwspec yet. In this situation,
{of,acpi}_iommu_configure() are retriggering iommu_probe_device() after
the IOMMU driver has seen the firmware data via .of_xlate to learn that
it actually responsible for the given device. As the result, before
that gets fixed, iommu_use_default_domain() goes at the end, and calls
arch_teardown_dma_ops() if it fails.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Stuart Yoder <stuyoder@gmail.com>
Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20220418005000.897664-5-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The open/reset/close commands format is similar for all objects.
Currently there are multiple implementations for these commands
scattered through various drivers. The code is cavsi-identical.
Create a generic implementation for the open/reset/close commands.
One of the consumer will be the VFIO driver which needs to
be able to reset a device.
Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com>
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Link: https://lore.kernel.org/r/20210922110530.24736-1-diana.craciun@oss.nxp.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In case of a switch DPAA2 object, the interface ID is also needed when
querying for the object endpoint. Extend fsl_mc_get_endpoint() so that
users can also pass the interface ID that are interested in.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The opening comment mark '/**' is used for kernel-doc comments.
There are certain comments in include/linux/fsl/guts.h which follows this
syntax, but the content inside does not comply with kernel-doc.
E.g., opening comment for "Freecale 85xx and 86xx Global Utilties
register set" follows kernel-doc syntax(i.e., '/**'), but the content
inside does not comply with any kernel-doc specification (function,
struct, etc).
This causes unwelcomed warning from kernel-doc:
"warning: expecting prototype for Freecale 85xx and 86xx Global Utilties register set(). Prototype was for __FSL_GUTS_H__() instead"
Replace all such comment occurrences with general comment format,
i.e. '/*' to pervent kernel-doc from parsing these.
Signed-off-by: Aditya Srivastava <yashsri421@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Pull networking updates from Jakub Kicinski:
- Add redirect_neigh() BPF packet redirect helper, allowing to limit
stack traversal in common container configs and improving TCP
back-pressure.
Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.
- Expand netlink policy support and improve policy export to user
space. (Ge)netlink core performs request validation according to
declared policies. Expand the expressiveness of those policies
(min/max length and bitmasks). Allow dumping policies for particular
commands. This is used for feature discovery by user space (instead
of kernel version parsing or trial and error).
- Support IGMPv3/MLDv2 multicast listener discovery protocols in
bridge.
- Allow more than 255 IPv4 multicast interfaces.
- Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
packets of TCPv6.
- In Multi-patch TCP (MPTCP) support concurrent transmission of data on
multiple subflows in a load balancing scenario. Enhance advertising
addresses via the RM_ADDR/ADD_ADDR options.
- Support SMC-Dv2 version of SMC, which enables multi-subnet
deployments.
- Allow more calls to same peer in RxRPC.
- Support two new Controller Area Network (CAN) protocols - CAN-FD and
ISO 15765-2:2016.
- Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
kernel problem.
- Add TC actions for implementing MPLS L2 VPNs.
- Improve nexthop code - e.g. handle various corner cases when nexthop
objects are removed from groups better, skip unnecessary
notifications and make it easier to offload nexthops into HW by
converting to a blocking notifier.
- Support adding and consuming TCP header options by BPF programs,
opening the doors for easy experimental and deployment-specific TCP
option use.
- Reorganize TCP congestion control (CC) initialization to simplify
life of TCP CC implemented in BPF.
- Add support for shipping BPF programs with the kernel and loading
them early on boot via the User Mode Driver mechanism, hence reusing
all the user space infra we have.
- Support sleepable BPF programs, initially targeting LSM and tracing.
- Add bpf_d_path() helper for returning full path for given 'struct
path'.
- Make bpf_tail_call compatible with bpf-to-bpf calls.
- Allow BPF programs to call map_update_elem on sockmaps.
- Add BPF Type Format (BTF) support for type and enum discovery, as
well as support for using BTF within the kernel itself (current use
is for pretty printing structures).
- Support listing and getting information about bpf_links via the bpf
syscall.
- Enhance kernel interfaces around NIC firmware update. Allow
specifying overwrite mask to control if settings etc. are reset
during update; report expected max time operation may take to users;
support firmware activation without machine reboot incl. limits of
how much impact reset may have (e.g. dropping link or not).
- Extend ethtool configuration interface to report IEEE-standard
counters, to limit the need for per-vendor logic in user space.
- Adopt or extend devlink use for debug, monitoring, fw update in many
drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx,
dpaa2-eth).
- In mlxsw expose critical and emergency SFP module temperature alarms.
Refactor port buffer handling to make the defaults more suitable and
support setting these values explicitly via the DCBNL interface.
- Add XDP support for Intel's igb driver.
- Support offloading TC flower classification and filtering rules to
mscc_ocelot switches.
- Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
fixed interval period pulse generator and one-step timestamping in
dpaa-eth.
- Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
offload.
- Add Lynx PHY/PCS MDIO module, and convert various drivers which have
this HW to use it. Convert mvpp2 to split PCS.
- Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
7-port Mediatek MT7531 IP.
- Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
and wcn3680 support in wcn36xx.
- Improve performance for packets which don't require much offloads on
recent Mellanox NICs by 20% by making multiple packets share a
descriptor entry.
- Move chelsio inline crypto drivers (for TLS and IPsec) from the
crypto subtree to drivers/net. Move MDIO drivers out of the phy
directory.
- Clean up a lot of W=1 warnings, reportedly the actively developed
subsections of networking drivers should now build W=1 warning free.
- Make sure drivers don't use in_interrupt() to dynamically adapt their
code. Convert tasklets to use new tasklet_setup API (sadly this
conversion is not yet complete).
* tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits)
Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH"
net, sockmap: Don't call bpf_prog_put() on NULL pointer
bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo
bpf, sockmap: Add locking annotations to iterator
netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements
net: fix pos incrementment in ipv6_route_seq_next
net/smc: fix invalid return code in smcd_new_buf_create()
net/smc: fix valid DMBE buffer sizes
net/smc: fix use-after-free of delayed events
bpfilter: Fix build error with CONFIG_BPFILTER_UMH
cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr
net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info
bpf: Fix register equivalence tracking.
rxrpc: Fix loss of final ack on shutdown
rxrpc: Fix bundle counting for exclusive connections
netfilter: restore NF_INET_NUMHOOKS
ibmveth: Identify ingress large send packets.
ibmveth: Switch order of ibmveth_helper calls.
cxgb4: handle 4-tuple PEDIT to NAT mode translation
selftests: Add VRF route leaking tests
...
Currently the DPRC scan function is used only by the bus driver.
But the same functionality will be needed by the VFIO driver.
To support this, the dprc scan function was exported and a little
bit adjusted to fit both scenarios. Also the scan mutex initialization
is done when the bus object is created, not in dprc_probe in order
to be used by both VFIO and bus driver.
Similarily dprc_remove_devices is exported to be used by VFIO.
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com>
Link: https://lore.kernel.org/r/20200929085441.17448-8-diana.craciun@oss.nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds
Arnd Bergmann
Vladimir Oltean
Wei Fang
Uwe Kleine-König (The Capable Hub)
Danilo Krummrich
Marc Zyngier
Dr. David Alan Gilbert
Ricardo B. Marliere
Kunwu Chan
Greg Kroah-Hartman
Uwe Kleine-König
Nikhil Gupta
Andrew Lunn
Lu Baolu
Krzysztof Kozlowski
Thomas Gleixner
Diana Craciun
Ioana Ciornei
Aditya Srivastava
Bharat Bhushan