commit 4b506ea535 upstream.
The HP OMEN 16 Gaming Laptop (board name 8A44) has a mux-less hybrid
GPU configuration with AMD Rembrandt (Radeon 680M) and NVIDIA GA104
(RTX 3070 Ti). The internal eDP panel is wired to the AMD iGPU.
When Nouveau loads without GSP firmware, the ACPI video backlight
device (acpi_video0) gets registered alongside the native AMD
backlight (amdgpu_bl2). In this state, writes to amdgpu_bl2 update
the software brightness value but fail to change the physical panel
brightness.
Force native backlight to prevent acpi_video0 from registering.
Confirmed that booting with acpi_backlight=native resolves the
issue.
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Shivam Kalra <shivamkalra98@zohomail.in>
Link: https://patch.msgid.link/20260426-omen-16-backlight-fix-v1-1-62364f268ea6@zohomail.in
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 75141a770f upstream.
When concurrently bringing up and down two SMT threads of a physical
core, many warning call traces occur as below:
The issue timeline is as follows:
1. When the system starts,
cpufreq: CPU: 220, policy->related_cpus: 220-221, policy->cpus: 220-221
2. Offline CPU 220 and CPU 221.
3. Online CPU 220
- CPU 221 is now offline, as acpi_get_psd_map() use
for_each_online_cpu(), so the cpu_data->shared_cpu_map,
policy->cpus, and related_cpus has only CPU 220.
cpufreq: CPU: 220, policy->related_cpus: 220, policy->cpus: 220
4. Offline CPU 220
5. Online CPU 221, the below call trace occurs:
- Since CPU 220 and CPU 221 share one policy, and
policy->related_cpus = 220 after step 3, so CPU 221
is not in policy->related_cpus but
per_cpu(cpufreq_cpu_data, cpu221) is not NULL.
After reverting commit 56eb0c0ed3 ("ACPI: CPPC: Fix remaining
for_each_possible_cpu() to use online CPUs"), the issue disappeared.
The _PSD (P-State Dependency) defines the hardware-level dependency of
frequency control across CPU cores. Since this relationship is a physical
attribute of the hardware topology, it remains constant regardless of the
online or offline status of the CPUs.
Using for_each_online_cpu() in acpi_get_psd_map() is problematic. If a
CPU is offline, it will be excluded from the shared_cpu_map.
Consequently, if that CPU is brought online later, the kernel will fail
to recognize it as part of any shared frequency domain.
Switch back to for_each_possible_cpu() to ensure that all cores defined
in the ACPI tables are correctly mapped into their respective performance
domains from the start. This aligns with the logic of policy->related_cpus,
which must encompass all potentially available cores in the domain to
prevent logic gaps during CPU hotplug operations.
To resolve the original issue regarding the "nosmt" or "nosmt=force"
boot parameter, as send_pcc_cmd() function already does if (!desc)
continue, so reverting that loop back to for_each_possible_cpu() is ok,
only need to change the match_cpc_ptr NULL case in acpi_get_psd_map() to
continue as Sean suggested.
How to reproduce, on arm64 machine with SMT support which use acpi cppc
cpufreq driver:
bash test.sh 220 & bash test.sh 221 &
The test.sh is as below:
while true
do
echo 0 > /sys/devices/system/cpu/cpu${1}/online
sleep 0.5
cat /sys/devices/system/cpu/cpu${1}/cpufreq/related_cpus
echo 1 > /sys/devices/system/cpu/cpu${1}/online
cat /sys/devices/system/cpu/cpu${1}/cpufreq/related_cpus
done
CPU: 221 PID: 1119 Comm: cpuhp/221 Kdump: loaded Not tainted 6.6.0debug+ #5
Hardware name: To be filled by O.E.M. S920X20/BC83AMDA01-7270Z, BIOS 20.39 09/04/2024
pstate: a1400009 (NzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : cpufreq_online+0x8ac/0xa90
lr : cpuhp_cpufreq_online+0x18/0x30
sp : ffff80008739bce0
x29: ffff80008739bce0 x28: 0000000000000000 x27: ffff28400ca32200
x26: 0000000000000000 x25: 0000000000000003 x24: ffffd483503ff000
x23: ffffd483504051a0 x22: ffffd48350024a00 x21: 00000000000000dd
x20: 000000000000001d x19: ffff28400ca32000 x18: 0000000000000000
x17: 0000000000000020 x16: ffffd4834e6a3fc8 x15: 0000000000000020
x14: 0000000000000008 x13: 0000000000000001 x12: 00000000ffffffff
x11: 0000000000000040 x10: ffffd48350430728 x9 : ffffd4834f087c78
x8 : 0000000000000001 x7 : ffff2840092bdf00 x6 : ffffd483504264f0
x5 : ffffd48350405000 x4 : ffff283f7f95cc60 x3 : 0000000000000000
x2 : ffff53bc2f94b000 x1 : 00000000000000dd x0 : 0000000000000000
Call trace:
cpufreq_online+0x8ac/0xa90
cpuhp_cpufreq_online+0x18/0x30
cpuhp_invoke_callback+0x128/0x580
cpuhp_thread_fun+0x110/0x1b0
smpboot_thread_fn+0x140/0x190
kthread+0xec/0x100
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
Cc: All applicable <stable@vger.kernel.org>
Fixes: 56eb0c0ed3 ("ACPI: CPPC: Fix remaining for_each_possible_cpu() to use online CPUs")
Co-developed-by: Sean Kelley <skelley@nvidia.com>
Signed-off-by: Sean Kelley <skelley@nvidia.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
[ rjw: Changelog edits ]
Link: https://patch.msgid.link/20260417040112.3727756-1-ruanjinjie@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ad7997f5a0 upstream.
The Dell OptiPlex 7770 AIO needs the same quirk as the 7760 AIO. The
backlight can be controlled with the native controller, intel_backlight,
but not with dell_uart_backlight.
I dumped the DSDT using acpidump, acpixtract and iasl, and confirmed
that it contains the DELL0501 device. When loading the
dell_uart_backlight driver with `rmmod dell_uart_backlight`, `modprobe
dell_uart_backlight dyndbg`, it reports "Firmware version: GL_Re_V18".
Fixes: cd8e468efb ("ACPI: video: Add Dell UART backlight controller detection")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Jan Schär <jan@jschaer.ch>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Link: https://patch.msgid.link/20260411092606.47925-1-jan@jschaer.ch
Signed-off-by: Rafael J. Wysocki <rjw@rjwysocki.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9c0acc169a upstream.
After acpi_init_device_object(), the lifetime of struct acpi_device is
managed by the driver core through reference counting.
Both acpi_add_power_resource() and acpi_add_single_object() call
acpi_init_device_object() and then invoke acpi_device_add(). If that
fails, their error paths call the release callback directly instead of
dropping the device reference through acpi_dev_put().
This bypasses the normal device lifetime rules and frees the object
without releasing the reference acquired by device_initialize(), which
may lead to a refcount leak.
The issue was identified by a static analysis tool I developed and
confirmed by manual review.
Fix both error paths by using acpi_dev_put() and let the release
callback handle the final cleanup.
Fixes: 781d737c74 ("ACPI: Drop power resources driver")
Fixes: 718fb0de8f ("ACPI: fix NULL bug for HID/UID string")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Link: https://patch.msgid.link/20260413135343.2884481-1-lgs201920130244@gmail.com
Signed-off-by: Rafael J. Wysocki <rjw@rjwysocki.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f6484cadbc ]
When ec_install_handlers() returns -EPROBE_DEFER on reduced-hardware
platforms, it has already started the EC and installed the address
space handler with the struct acpi_ec pointer as handler context.
However, acpi_ec_setup() propagates the error without any cleanup.
The caller acpi_ec_add() then frees the struct acpi_ec for non-boot
instances, leaving a dangling handler context in ACPICA.
Any subsequent AML evaluation that accesses an EC OpRegion field
dispatches into acpi_ec_space_handler() with the freed pointer,
causing a use-after-free:
BUG: KASAN: slab-use-after-free in mutex_lock (kernel/locking/mutex.c:289)
Write of size 8 at addr ffff88800721de38 by task init/1
Call Trace:
<TASK>
mutex_lock (kernel/locking/mutex.c:289)
acpi_ec_space_handler (drivers/acpi/ec.c:1362)
acpi_ev_address_space_dispatch (drivers/acpi/acpica/evregion.c:293)
acpi_ex_access_region (drivers/acpi/acpica/exfldio.c:246)
acpi_ex_field_datum_io (drivers/acpi/acpica/exfldio.c:509)
acpi_ex_extract_from_field (drivers/acpi/acpica/exfldio.c:700)
acpi_ex_read_data_from_field (drivers/acpi/acpica/exfield.c:327)
acpi_ex_resolve_node_to_value (drivers/acpi/acpica/exresolv.c:392)
</TASK>
Allocated by task 1:
acpi_ec_alloc (drivers/acpi/ec.c:1424)
acpi_ec_add (drivers/acpi/ec.c:1692)
Freed by task 1:
kfree (mm/slub.c:6876)
acpi_ec_add (drivers/acpi/ec.c:1751)
The bug triggers on reduced-hardware EC platforms (ec->gpe < 0)
when the GPIO IRQ provider defers probing. Once the stale handler
exists, any unprivileged sysfs read that causes AML to touch an
EC OpRegion (battery, thermal, backlight) exercises the dangling
pointer.
Fix this by calling ec_remove_handlers() in the error path of
acpi_ec_setup() before clearing first_ec. ec_remove_handlers()
checks each EC_FLAGS_* bit before acting, so it is safe to call
regardless of how far ec_install_handlers() progressed:
-ENODEV (handler not installed): only calls acpi_ec_stop()
-EPROBE_DEFER (handler installed): removes handler, stops EC
Fixes: 03e9a0e057 ("ACPI: EC: Consolidate event handler installation code")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Link: https://patch.msgid.link/20260324165458.1337233-2-bestswngs@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 393815f576 ]
The pointer returned from acpi_os_map_generic_address() is
tagged with __iomem, so make the rv it is returned to also
of void __iomem * type.
Fixes the following sparse warning:
drivers/acpi/osl.c:1686:20: warning: incorrect type in assignment (different address spaces)
drivers/acpi/osl.c:1686:20: expected void *rv
drivers/acpi/osl.c:1686:20: got void [noderef] __iomem *
Fixes: 6915564dc5 ("ACPI: OSL: Change the type of acpi_os_map_generic_address() return value")
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
[ rjw: Subject tweak, added Fixes tag ]
Link: https://patch.msgid.link/20260311105835.463030-1-ben.dooks@codethink.co.uk
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ede902062 ]
The screen backlight turns off during boot (specifically during udev device
initialization) when returning true for _OSI("Windows 2009").
Analyzing the device's DSDT reveals that the firmware takes a different
code path when Windows 7 is reported, which leads to the backlight shutoff.
Add a DMI quirk to invoke dmi_disable_osi_win7 for this model.
Signed-off-by: Sofia Schneider <sofia@schn.dev>
Link: https://patch.msgid.link/20260223025240.518509-1-sofia@schn.dev
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b584bfbd7e ]
After a recent innocuous change to drivers/acpi/apei/ghes.c, building
ARCH=arm64 allmodconfig with clang-17 or older (which has both
CONFIG_KASAN=y and CONFIG_WERROR=y) fails with:
drivers/acpi/apei/ghes.c:902:13: error: stack frame size (2768) exceeds limit (2048) in 'ghes_do_proc' [-Werror,-Wframe-larger-than]
902 | static void ghes_do_proc(struct ghes *ghes,
| ^
A KASAN pass that removes unneeded stack instrumentation, enabled by
default in clang-18 [1], drastically improves stack usage in this case.
To avoid the warning in the common allmodconfig case when it can break
the build, disable KASAN for ghes.o when compile testing with clang-17
and older. Disabling KASAN outright may hide legitimate runtime issues,
so live with the warning in that case; the user can either increase the
frame warning limit or disable -Werror, which they should probably do
when debugging with KASAN anyways.
Closes: https://github.com/ClangBuiltLinux/linux/issues/2148
Link: https://github.com/llvm/llvm-project/commit/51fbab134560ece663517bf1e8c2a30300d08f1a [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Cc: All applicable <stable@vger.kernel.org>
Link: https://patch.msgid.link/20260114-ghes-avoid-wflt-clang-older-than-18-v1-1-9c8248bfe4f4@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb1256e0dd ]
On some laptops, such as the Huawei Matebook series, the embedded
controller continues to report "Charging" status even when the
charge threshold is reached and no current is being drawn.
This incorrect reporting prevents the system from switching to battery
power profiles, leading to significantly higher power (e.g., 18W instead
of 7W during browsing) and missed remaining battery time estimation.
Validate the "Charging" state by checking if rate_now is zero. If the
hardware reports charging but the current is zero, report "Not Charging"
to user space.
Signed-off-by: Ata İlhan Köktürk <atailhan2006@gmail.com>
[ rjw: Whitespace fix, braces added to an inner if (), new comment rewrite ]
[ rjw: Changelog edits ]
Link: https://patch.msgid.link/20260129144856.43058-1-atailhan2006@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 229ecbaac6 ]
Windows 11, version 22H2 introduced a new function index (Function 9) to
the Microsoft LPS0 _DSM, titled "Turn On Display Notification".
According to Microsoft documentation, this function signals to the system
firmware that the OS intends to turn on the display when exiting Modern
Standby. This allows the firmware to release Power Limits (PLx) earlier.
Crucially, this patch fixes a functional issue observed on the Lenovo Yoga
Slim 7i Aura (15ILL9), where system fans and keyboard backlights fail to
resume after suspend. Investigation linked shows the EC on this device
turns off these components during sleep but requires the Function 9
notification to wake them up again.
This patch defines the new function index (ACPI_MS_TURN_ON_DISPLAY) and
invokes it in acpi_s2idle_restore_early_lps0(). The execution order is
updated to match the logic of an "intent" signal:
1. LPS0 Exit (Function 6)
2. Turn On Display Intent (Function 9)
3. Modern Standby Exit (Function 8)
4. Screen On (Function 4)
Invoking Function 9 before the Modern Standby Exit ensures the firmware
has time to restore power rails and functionality (like fans) before the
software fully exits the sleep state.
Link: https://learn.microsoft.com/en-us/windows-hardware/design/device-experiences/modern-standby-firmware-notifications#turn-on-display-notification-function-9
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220505
Suggested-by: Antheas Kapenekakis <antheas@antheas.dev>
Signed-off-by: Jakob Riemenschneider <riemenschneiderjakob@gmail.com>
Link: https://patch.msgid.link/20260127200121.1292216-1-riemenschneiderjakob@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 026ad376a6 ]
The ACPI specification states that when executing AML_FATAL_OP,
the OS should log the fatal error event and shutdown in a timely
fashion.
Windows complies with this requirement by immediatly entering a
Bso_d, effectively aborting the execution of the AML bytecode in
question.
ACPICA however might continue with the AML bytecode execution
should acpi_os_signal() simply return AE_OK. This will cause issues
because ACPI BIOS implementations might assume that the Fatal()
operator does not return.
Fix this by aborting the AML bytecode execution in such a case
by returning AE_ERROR. Also turn struct acpi_signal_fatal_info into a
local variable because of its small size (12 bytes) and to ensure
that acpi_os_signal() always receives valid information about the
fatal ACPI BIOS error.
Link: https://github.com/acpica/acpica/commit/d516c7758ba6
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3325491.5fSG56mABF@rafael.j.wysocki
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba6ded26df ]
Like the JWIPC JVC9100 has its serial IRQ (10 and 11) described
as ActiveLow in the DSDT, which the kernel overrides to EdgeHigh which
breaks the serial.
irq 10, level, active-low, shared, skip-override
irq 11, level, active-low, shared, skip-override
Add the JVC9100 to the irq1_level_low_skip_override[] quirk table to fix
this.
Signed-off-by: Ai Chao <aichao@kylinos.cn>
Link: https://patch.msgid.link/20260113072719.4154485-1-aichao@kylinos.cn
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f132e089fe ]
In acpi_processor_errata_piix4(), the pointer dev is first assigned an IDE
device and then reassigned an ISA device:
dev = pci_get_subsys(..., PCI_DEVICE_ID_INTEL_82371AB, ...);
dev = pci_get_subsys(..., PCI_DEVICE_ID_INTEL_82371AB_0, ...);
If the first lookup succeeds but the second fails, dev becomes NULL. This
leads to a potential null-pointer dereference when dev_dbg() is called:
if (errata.piix4.bmisx)
dev_dbg(&dev->dev, ...);
To prevent this, use two temporary pointers and retrieve each device
independently, avoiding overwriting dev with a possible NULL value.
Signed-off-by: Tuo Li <islituo@gmail.com>
[ rjw: Subject adjustment, added an empty code line ]
Link: https://patch.msgid.link/20260111163214.202262-1-islituo@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd7ef20ba8 ]
On the THUNDEROBOT ZERO laptop, the second NVMe slot and the discrete
NVIDIA GPU are both controlled by power-resource PXP. Due to the SSDT table
bug (lack of reference), PXP will be shut dow as an "unused" power resource
during initialization, making the NVMe slot #2 + NVIDIA both inaccessible.
This issue was introduced by commit a1224f34d7 ("ACPI: PM: Check
states of power resources during initialization"). Here are test
results on the three consecutive commits:
(bad again!) a1224f34d7 ACPI: PM: Check states of power resources during initialization
(good) bc28368596 ACPI: PM: Do not turn off power resources in unknown state
(bad) 519d81956e Linux 5.15-rc6
On commit bc28368596 ("ACPI: PM: Do not turn off power resources in
unknown state") this was not an issue because the power resource state
left UNKNOWN thus being ignored.
See also commit 9b04d99788 ("ACPI: PM: Do not turn of unused power
resources on the Toshiba Click Mini") which is another almost identical
case to this one.
Fixes: a1224f34d7 ("ACPI: PM: Check states of power resources during initialization")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221087
Signed-off-by: Zhai Can <bczhc0@126.com>
Link: https://patch.msgid.link/20260214161452.2849346-1-bczhc0@126.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56eb0c0ed3 ]
per_cpu(cpc_desc_ptr, cpu) object is initialized for only the online
CPUs via acpi_soft_cpu_online() --> __acpi_processor_start() -->
acpi_cppc_processor_probe().
However, send_pcc_cmd() and acpi_get_psd_map() still iterate over all
possible CPUs. In acpi_get_psd_map(), encountering an offline CPU
returns -EFAULT, causing cppc_cpufreq initialization to fail.
This breaks systems booted with "nosmt" or "nosmt=force".
Fix by using for_each_online_cpu() in both functions.
Fixes: 80b8286aee ("ACPI / CPPC: support for batching CPPC requests")
Signed-off-by: Sean V Kelley <skelley@nvidia.com>
Link: https://patch.msgid.link/20260211212254.30190-1-skelley@nvidia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e00f7a4bb ]
Some firmware implementations use the "Ones" ASL opcode to produce
an integer with all bits set in order to indicate missing speed or
power readings. This however only works when using 32-bit integers,
as the ACPI spec requires a 32-bit integer (0xFFFFFFFF) to be
returned for missing speed/power readings. With 64-bit integers the
"Ones" opcode produces a 64-bit integer with all bits set, violating
the ACPI spec regarding the placeholder value for missing readings.
Work around such buggy firmware implementation by also checking for
64-bit integers with all bits set when reading _FST.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
[ rjw: Typo fix in the changelog ]
Link: https://patch.msgid.link/20251007234149.2769-3-W_Armin@gmx.de
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 96b010536e ]
Up to UEFI spec 2.9, the type byte of CPER struct for ARM processor
was defined simply as:
Type at byte offset 4:
- Cache error
- TLB Error
- Bus Error
- Micro-architectural Error
All other values are reserved
Yet, there was no information about how this would be encoded.
Spec 2.9A errata corrected it by defining:
- Bit 1 - Cache Error
- Bit 2 - TLB Error
- Bit 3 - Bus Error
- Bit 4 - Micro-architectural Error
All other values are reserved
That actually aligns with the values already defined on older
versions at N.2.4.1. Generic Processor Error Section.
Spec 2.10 also preserve the same encoding as 2.9A.
Adjust CPER and GHES handling code for both generic and ARM
processors to properly handle UEFI 2.9A and 2.10 encoding.
Link: https://uefi.org/specs/UEFI/2.10/Apx_N_Common_Platform_Error_Record.html#arm-processor-error-information
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17e7972979 ]
On all AMD AM4 systems I have seen, e.g ASUS X470-i, Pro WS X570 Ace
and equivalent Gigabyte, amd-pstate does not initialize when the
x2apic is enabled in the BIOS. Kernel debug messages include:
[ 0.315438] acpi LNXCPU:00: Failed to get CPU physical ID.
[ 0.354756] ACPI CPPC: No CPC descriptor for CPU:0
[ 0.714951] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
I tracked this down to map_x2apic_id() checking device_declaration
passed in via the type argument of acpi_get_phys_id() via
map_madt_entry() while map_lapic_id() does not.
It appears these BIOSes use Processor statements for declaring the CPUs
in the ACPI namespace instead of processor device objects (which should
have been used). CPU declarations via Processor statements were
deprecated in ACPI 6.0 that was released 10 years ago. They should not
be used any more in any contemporary platform firmware.
I tried to contact Asus support multiple times, but never received a
reply nor did any BIOS update ever change this.
Fix amd-pstate w/ x2apic on am4 by allowing map_x2apic_id() to work with
CPUs declared via Processor statements for IDs less than 255, which is
consistent with ACPI 5.0 that still allowed Processor statements to be
used for declaring CPUs.
Fixes: 7237d3de78 ("x86, ACPI: add support for x2apic ACPI extensions")
Signed-off-by: René Rebe <rene@exactco.de>
[ rjw: Changelog edits ]
Link: https://patch.msgid.link/20251126.165513.1373131139292726554.rene@exactco.de
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05954511b7 ]
The ARM processor CPER record was added in UEFI v2.6 and remained
unchanged up to v2.10.
Yet, the original arm_event trace code added by
e9279e83ad ("trace, ras: add ARM processor error trace event")
is incomplete, as it only traces some fields of UAPI 2.6 table N.16, not
exporting any information from tables N.17 to N.29 of the record.
This is not enough for the user to be able to figure out what has
exactly happened or to take appropriate action.
According to the UEFI v2.9 specification chapter N2.4.4, the ARM
processor error section includes:
- several (ERR_INFO_NUM) ARM processor error information structures
(Tables N.17 to N.20);
- several (CONTEXT_INFO_NUM) ARM processor context information
structures (Tables N.21 to N.29);
- several vendor specific error information structures. The
size is given by Section Length minus the size of the other
fields.
In addition, it also exports two fields that are parsed by the GHES
driver when firmware reports it, e.g.:
- error severity
- CPU logical index
Report all of these information to userspace via a the ARM tracepoint so
that userspace can properly record the error and take decisions related
to CPU core isolation according to error severity and other info.
The updated ARM trace event now contains the following fields:
====================================== =============================
UEFI field on table N.16 ARM Processor trace fields
====================================== =============================
Validation handled when filling data for
affinity MPIDR and running
state.
ERR_INFO_NUM pei_len
CONTEXT_INFO_NUM ctx_len
Section Length indirectly reported by
pei_len, ctx_len and oem_len
Error affinity level affinity
MPIDR_EL1 mpidr
MIDR_EL1 midr
Running State running_state
PSCI State psci_state
Processor Error Information Structure pei_err - count at pei_len
Processor Context ctx_err- count at ctx_len
Vendor Specific Error Info oem - count at oem_len
====================================== =============================
It should be noted that decoding of tables N.17 to N.29, if needed, will
be handled in userspace. That gives more flexibility, as there won't be
any need to flood the kernel with micro-architecture specific error
decoding.
Also, decoding the other fields require a complex logic, and should be
done for each of the several values inside the record field. So, let
userspace daemons like rasdaemon decode them, parsing such tables and
having vendor-specific micro-architecture-specific decoders.
[mchehab: modified description, solved merge conflicts and fixed coding style]
Signed-off-by: Jason Tian <jason@os.amperecomputing.com>
Co-developed-by: Shengwei Luo <luoshengwei@huawei.com>
Signed-off-by: Shengwei Luo <luoshengwei@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Daniel Ferguson <danielf@os.amperecomputing.com> # rebased
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Shiju Jose <shiju.jose@huawei.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Fixes: e9279e83ad ("trace, ras: add ARM processor error trace event")
Link: https://uefi.org/specs/UEFI/2.10/Apx_N_Common_Platform_Error_Record.html#arm-processor-error-section
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 593ee49222 ]
acpi_fwnode_graph_parse_endpoint() calls fwnode_get_parent() to obtain the
parent fwnode but returns without calling fwnode_handle_put() on it. This
potentially leads to a fwnode refcount leak and prevents the parent node
from being released properly.
Call fwnode_handle_put() on the parent fwnode before returning to prevent
the leak from occurring.
Fixes: 3b27d00e7b ("device property: Move fwnode graph ops to firmware specific locations")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
[ rjw: Changelog edits ]
Link: https://patch.msgid.link/20251111075000.1828-1-vulab@iscas.ac.cn
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 214291cbaa ]
The following lockdep splat was observed while kernel auto-online a CXL
memory region:
======================================================
WARNING: possible circular locking dependency detected
6.17.0djtest+ #53 Tainted: G W
------------------------------------------------------
systemd-udevd/3334 is trying to acquire lock:
ffffffff90346188 (hmem_resource_lock){+.+.}-{4:4}, at: hmem_register_resource+0x31/0x50
but task is already holding lock:
ffffffff90338890 ((node_chain).rwsem){++++}-{4:4}, at: blocking_notifier_call_chain+0x2e/0x70
which lock already depends on the new lock.
[..]
Chain exists of:
hmem_resource_lock --> mem_hotplug_lock --> (node_chain).rwsem
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
rlock((node_chain).rwsem);
lock(mem_hotplug_lock);
lock((node_chain).rwsem);
lock(hmem_resource_lock);
The lock ordering can cause potential deadlock. There are instances
where hmem_resource_lock is taken after (node_chain).rwsem, and vice
versa.
Split out the target update section of hmat_register_target() so that
hmat_callback() only envokes that section instead of attempt to register
hmem devices that it does not need to.
[ dj: Fix up comment to be closer to 80cols. (Jonathan) ]
Fixes: cf8741ac57 ("ACPI: NUMA: HMAT: Register "soft reserved" memory as an "hmem" device")
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Tested-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Reviewed-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20251105235115.85062-3-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0fce758706 ]
per_cpu(cpc_desc_ptr, cpu) object is initialized for only the online
CPU via acpi_soft_cpu_online() --> __acpi_processor_start() -->
acpi_cppc_processor_probe().
However the function cppc_perf_ctrs_in_pcc() checks if the CPPC
perf-ctrs are in a PCC region for all the present CPUs, which breaks
when the kernel is booted with "nosmt=force".
Hence, limit the check only to the online CPUs.
Fixes: ae2df912d1 ("ACPI: CPPC: Disable FIE if registers in PCC regions")
Reviewed-by: "Mario Limonciello (AMD) (kernel.org)" <superm1@kernel.org>
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://patch.msgid.link/20251107074145.2340-5-gautham.shenoy@amd.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8821c8e80a ]
per_cpu(cpc_desc_ptr, cpu) object is initialized for only the online
CPUs via acpi_soft_cpu_online() --> __acpi_processor_start() -->
acpi_cppc_processor_probe().
However the function cppc_allow_fast_switch() checks for the validity
of the _CPC object for all the present CPUs. This breaks when the
kernel is booted with "nosmt=force".
Check fast_switch capability only on online CPUs
Fixes: 15eece6c5b ("ACPI: CPPC: Fix NULL pointer dereference when nosmp is used")
Reviewed-by: "Mario Limonciello (AMD) (kernel.org)" <superm1@kernel.org>
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://patch.msgid.link/20251107074145.2340-4-gautham.shenoy@amd.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 543d350040 upstream.
Commit 4d330fe541 ("ACPI: SPCR: Support Precise Baud Rate field")
added support to use the precise baud rate available since SPCR 1.09
(revision 4) but failed to check the version of the table provided by
the firmware.
Accessing an older version of SPCR table causes accesses beyond the
end of the table and can lead to garbage data to be used for the baud
rate.
Check the version of the firmware provided SPCR to ensure that the
precise baudrate is vaild before using it.
Fixes: 4d330fe541 ("ACPI: SPCR: Support Precise Baud Rate field")
Signed-off-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Link: https://patch.msgid.link/20251024123125.1081612-1-punit.agrawal@oss.qualcomm.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e9dff11a7a ]
When deleting the previous walkstate operand stack
acpi_ds_call_control_method() was deleting obj_desc->Method.param_count
operands. But Method.param_count does not necessarily match
this_walk_state->num_operands, it may be either less or more.
After correcting the for loop to check `i < this_walk_state->num_operands`
the code is identical to acpi_ds_clear_operands(), so just outright
replace the code with acpi_ds_clear_operands() to fix this.
Link: https://github.com/acpica/acpica/commit/53fc0220
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4405a214df ]
Some x86/ACPI laptops with MIPI cameras have a INTC10DE or INTC10E0 ACPI
device in the _DEP dependency list of the ACPI devices for the camera-
sensors (which have flags.honor_deps set).
These devices are for an Intel Vision CVS chip for which an out of tree
driver is available [1].
The camera sensor works fine without a driver being loaded for this
ACPI device on the 2 laptops this was tested on:
ThinkPad X1 Carbon Gen 12 (Meteor Lake)
ThinkPad X1 2-in-1 Gen 10 (Arrow Lake)
For now add these HIDs to acpi_ignore_dep_ids[] so that
acpi_dev_ready_for_enumeration() will return true once the other _DEP
dependencies are met and an i2c_client for the camera sensor will get
instantiated.
Link: https://github.com/intel/vision-drivers/ [1]
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://patch.msgid.link/20250829142748.21089-1-hansg@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a351de0d9 ]
Just like the other Vivobooks here, the N6506CU has its keyboard IRQ
described as ActiveLow in the DSDT, which the kernel overrides to
EdgeHigh, causing the internal keyboard not to work.
Add the N6506CU to the irq1_level_low_skip_override[] quirk table to fix
this.
Signed-off-by: Sam van Kampen <sam@tehsvk.net>
Link: https://patch.msgid.link/20250829145221.2294784-2-sam@tehsvk.net
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d91a1d129b ]
Device-managed resources are cleaned up when the driver unbinds from
the underlying device. In our case this is the platform device as this
driver is a platform driver. Registering device-managed resources on
the associated ACPI device will thus result in a resource leak when
this driver unbinds.
Ensure that any device-managed resources are only registered on the
platform device to ensure that they are cleaned up during removal.
Fixes: 35c50d853a ("ACPI: fan: Add hwmon support")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Cc: 6.11+ <stable@vger.kernel.org> # 6.11+
Link: https://patch.msgid.link/20251007234149.2769-4-W_Armin@gmx.de
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
